diff options
149 files changed, 24736 insertions, 0 deletions
diff --git a/conf/bblayers.conf b/conf/bblayers.conf new file mode 100644 index 0000000..be77226 --- /dev/null +++ b/conf/bblayers.conf @@ -0,0 +1,4 @@ +LCONF_VERSION = "1" +BBFILES ?= "" +BBPATH = "${OETREE}" +BBLAYERS = "${OETREE}/openembedded ${OETREE}/multitech" diff --git a/conf/local.conf b/conf/local.conf new file mode 100644 index 0000000..4317cc4 --- /dev/null +++ b/conf/local.conf @@ -0,0 +1,126 @@ +# +# Multi-Tech OpenEmbedded config +# +# Please visit the Wiki at http://openembedded.org/ for more info. +# +# WARNING: lines starting with a space (' ') will result in parse failures. +# Remove '# ' from commented lines to activate them. +# +# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you +# must have paths relative to your homedir use ${HOME} (note the {}'s there +# you MUST have them for the variable expansion to be done by BitBake). Your +# paths should all be absolute paths (They should all start with a / after +# expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok). + +# Use this to specify where BitBake should place the downloaded sources into +DL_DIR = "${OETREE}/sources" + +# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files +# This is a regular expression, so be sure to get your parenthesis balanced. +BBMASK = "" + +# Uncomment this if you want to use a prebuilt toolchain. You will need to +# provide packages for toolchain and additional libraries yourself. You also +# have to set PATH in your environment to make sure BitBake finds additional binaries. +# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" + +# Uncomment this if you're building for an arch that uses emulated locale +# generation under qemu (mainly arm glibc) and have an external gcc 3.x compiler +# that OE recognises. This will mean the gcc-native build is skipped, speeding +# builds up. +# ASSUME_PROVIDED += "gcc3-native" + +# Select between multiple alternative providers, if more than one is eligible. +PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie" +PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-intermediate:gcc-cross-intermediate" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" + +# Uncomment this to specify where BitBake should create its temporary files. +# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard +# disk space, so make sure to free enough space. The default TMPDIR is +# <build directory>/tmp +# Don't use symlinks in in the path to avoid problems +TMPDIR = "${OETREE}/build/tmp" + +# Set machine type, which also sets TARGET_ARCH +MACHINE = "mtcdp" + +# Use Multi-Tech CoreCDP distribution +DISTRO = "corecdp" + +# So far, angstrom.conf sets ENABLE_BINARY_LOCALE_GENERATION +# to generate binary locale packages at build time using qemu-native and +# thereby guarantee i18n support on all devices. If your build breaks on +# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that +# this breaks i18n on devices with less than 128MB RAM) or installing +# a working third-party qemu (e.g. provided by your distribution) and +# adding qemu-native to ASSUME_PROVIDED. Caveat emptor, since third-party +# qemus lack patches needed to work with various OE targets. +ENABLE_BINARY_LOCALE_GENERATION = "0" +# ASSUME_PROVIDED += "qemu-native" + +# If ENABLE_BINARY_LOCALE_GENERATION is set to "1", you can limit locales +# generated to the list provided by GLIBC_GENERATE_LOCALES. This is huge +# time-savior for developmental builds. Format: list of locale.encoding pairs +# with spaces as separators. +# GLIBC_GENERATE_LOCALES = "en_US.UTF-8 en_GB.UTF-8 de_DE.UTF-8" + +# Add the required image file system types below. Valid are +# jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz) +# squashfs, squashfs-lzma +IMAGE_FSTYPES = "jffs2 tar" + +# Uncomment this if you want to keep the temporary rootfs +# diretory, this can be useful during development. +# (Note that this rootfs is NOT usuable as NFS export.) +IMAGE_KEEPROOTFS = "1" + +# Uncomment this to remove unpacked source and intermediate work +# after successfully building a package. +# Saves a LOT of disk space, but leaving work around is useful for debugging. +# INHERIT += "rm_work" + +# Uncomment this if you want BitBake to emit debugging output +# BBDEBUG = "yes" + +# Uncomment these two if you want BitBake to build images useful for debugging. +# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined. +# Also note that OE now produces -dbg packages which contain debugging symbols. +# DEBUG_BUILD = "1" +# INHIBIT_PACKAGE_STRIP = "1" + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# Uncomment this to enable parallel make. +# This allows make to spawn mutliple processes to take advantage of multiple +# processors. Useful on SMP machines. This may break some packages - we're +# in the process of marking these so let us know if you find any. +PARALLEL_MAKE = "-j 2" + +# Uncomment to run multiple bitbake threads in parallel. +# Bitbake can do multiple jobs in parallel: Its a good idea make use of +# all available resources: e.g. to download sources while some other +# piece of software is compiled. +BB_NUMBER_THREADS = "2" + +# Uncomment this if you want BitBake to emit the log if a build fails. +BBINCLUDELOGS = "yes" + +# Specifies a location to search for pre-generated tarballs when fetching +# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS. +#CVS_TARBALL_STASH = "" + +# Uncomment this if you want to install shared libraries directly under their SONAME, +# rather than installing as the full version and symlinking to the SONAME. +# PACKAGE_SNAP_LIB_SYMLINKS = "1" diff --git a/env-oe.sh b/env-oe.sh new file mode 100644 index 0000000..eb5e4ca --- /dev/null +++ b/env-oe.sh @@ -0,0 +1,13 @@ +#!/usr/bin/env bash + +export OETREE=$(pwd) + +if [[ ! "${PATH}" =~ ${OETREE}/bitbake/bin ]]; then + export PATH=${OETREE}/bitbake/bin:${PATH} +fi + +# define if you wish to create soft links to the image in the tftpboot dir +#export TFTPBOOT_DIR=/tftpboot + +export BBPATH=${OETREE} +export BB_ENV_EXTRAWHITE="MACHINE DISTRO OETREE ANGSTROM_MODE ANGSTROMLIBC LIBC TFTPBOOT_DIR" diff --git a/multitech/LICENSE b/multitech/LICENSE new file mode 100644 index 0000000..7f78804 --- /dev/null +++ b/multitech/LICENSE @@ -0,0 +1,3 @@ +Multi-Tech CoreCDP is a compilation of software (comparable to a Linux distribution). It is your responsibility to review each license of the contained products to understand what is, and what is not, allowed by each such license. The root directory 'licenses' contains licenses represented within this distribution. To the extent a license is not contained in the 'licenses' directory, it is referenced in the software and remains your responsibility to review.
+
+All Multi-Tech-copyrighted software contained in CoreCDP is covered by version 2 of the GNU General Public License (see '/licenses/GPLv2' for a copy of the license), unless provided under a different license.
diff --git a/multitech/README b/multitech/README new file mode 100644 index 0000000..66f6c3c --- /dev/null +++ b/multitech/README @@ -0,0 +1,37 @@ +CoreCDP - Multi-Tech Cellular Development Platform
+==================================================
+
+What is it?
+-----------
+
+CoreCDP is a distribution provided by Multi-Tech tailored for the MTCDP
+hardware development platform. CoreCDP is a branch of OpenEmbedded provided
+by Multi-Tech Systems.
+
+The Cellular Development Platform utilizes the OpenEmbedded framework to build
+a custom Linux distribution that runs on Multi-Tech hardware. OpenEmbedded
+provides a complete environment for cross-compiling 1000's of open source
+software packages.
+
+For more information about CoreCDP, see http://www.multitech.net
+
+For more information about OpenEmbedded, see http://www.openembedded.org
+
+How to get started?
+-------------------
+
+Download the file 'corecdp-oe-1.0.0.tar.gz' (release number may vary) from the
+http://www.multitech.net website or copy it from the provided DVD. This file
+provides the CoreCDP build system and a set of sources sufficient for building
+the sample images provided by CoreCDP.
+
+Untar the contents to a folder of your choice, and install prerequisite
+packages. Then, configure the environment variables and you are good to go.
+
+See the Multi-Tech Developer website (http://www.multitech.net) for full
+installation and build instructions. In particular, see the "Introduction" and
+"Getting Started" pages under the Cellular Development Platform section.
+
+You can also join the available developer forums to post queries and receive
+updates from Multi-Tech developers.
+
diff --git a/multitech/classes/corecdp-mirrors.bbclass b/multitech/classes/corecdp-mirrors.bbclass new file mode 100644 index 0000000..0d1f0b4 --- /dev/null +++ b/multitech/classes/corecdp-mirrors.bbclass @@ -0,0 +1,4 @@ +MIRRORS_append () { +ftp://.*/.* http://www.multitech.net/corecdp/sources/ +https?$://.*/.* http://www.multitech.net/corecdp/sources/ +} diff --git a/multitech/conf/distro/corecdp.conf b/multitech/conf/distro/corecdp.conf new file mode 100644 index 0000000..85784a7 --- /dev/null +++ b/multitech/conf/distro/corecdp.conf @@ -0,0 +1,42 @@ +#@TYPE: Distribution +#@NAME: CoreCDP <http://www.multitech.net> +#@DESCRIPTION: CoreCDP Linux Distribution for the MTCDP Cellular Development Platform +#@MAINTAINER: Multi-Tech Systems <oe-devel@multitech.net> + +# Angstrom-based distribution by Multi-Tech Systems, Inc. +require conf/distro/angstrom-2010.x.conf + +DISTRO_NAME = "CoreCDP" +DISTRO = "corecdp" +DISTRO_VERSION = "2.0.0-preview" +DISTRO_TYPE = "release" +TARGET_VENDOR = "-corecdp" +BUILDNAME = "${DISTRO_NAME} ${DISTRO_VERSION}" + +# Add Multi-Tech mirror for source download as a backup +INHERIT += "corecdp-mirrors" + +IPKG_VARIANT = "opkg corecdp-version" + +# use busybox instead of tinylogin +IMAGE_LOGIN_MANAGER = "busybox" + +DEFAULT_TIMEZONE = "America/Chicago" + +# Java versions that work together +# initial verions +PREFERRED_VERSION_jamvm-initial ?= "1.4.5" +PREFERRED_VERSION_classpath-initial ?= "0.93" + +# native versions +PREFERRED_VERSION_jamvm-native ?= "1.5.3" +PREFERRED_VERSION_classpath-native ?= "0.98" + +# target device +PREFERRED_VERSION_jamvm ?= "1.5.2" +PREFERRED_VERSION_classpath ?= "0.98" + +PREFERRED_VERSION_lighttpd = "1.4.28" + +# don't build bluez4 and the large amount of deps just for libpcap +PREFERRED_PROVIDER_libpcap = "libpcap-nobluetooth" diff --git a/multitech/conf/layer.conf b/multitech/conf/layer.conf new file mode 100644 index 0000000..86f136d --- /dev/null +++ b/multitech/conf/layer.conf @@ -0,0 +1,5 @@ +BBFILES += "${LAYERDIR}/recipes/*/*.bb ${LAYERDIR}/recipes/*/*.bbappend" +BBPATH .= ":${LAYERDIR}" +BBFILE_COLLECTIONS += "multitech" +BBFILE_PRIORITY_multitech = "5" +BBFILE_PATTERN_multitech = "${LAYERDIR}" diff --git a/multitech/conf/machine/mtcdp-embedded.conf b/multitech/conf/machine/mtcdp-embedded.conf new file mode 100644 index 0000000..f571f2d --- /dev/null +++ b/multitech/conf/machine/mtcdp-embedded.conf @@ -0,0 +1,29 @@ +#@TYPE: Machine +#@Name: Multi-Tech MTCDP Embedded +#@DESCRIPTION: Machine configuration for the Embedded MTCDP (Cellular Development Platform) + +TARGET_ARCH = "arm" + +PREFERRED_PROVIDER_virtual/kernel = "linux" + +PREFERRED_VERSION_linux = "2.6.32" +PREFERRED_VERSION_mts-io ?= "0.4.1" + +KERNEL_IMAGETYPE = "uImage" +UBOOT_MACHINE = "at91sam9g20ek_nandflash_config" + +PREFERRED_VERSION_at91bootstrap = "2.13" +PREFERRED_VERSION_u-boot = "1.3.4" + +#don't try to access tty1 +USE_VT = "0" + +MACHINE_FEATURES = "kernel26 ext2 usbhost usbgadget" +EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot" + +# used by sysvinit_2 +SERIAL_CONSOLE = "115200 ttyS0" +IMAGE_FSTYPES ?= "jffs2" +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" + +require conf/machine/include/tune-arm926ejs.inc diff --git a/multitech/conf/machine/mtcdp.conf b/multitech/conf/machine/mtcdp.conf new file mode 100644 index 0000000..336e31b --- /dev/null +++ b/multitech/conf/machine/mtcdp.conf @@ -0,0 +1,29 @@ +#@TYPE: Machine +#@Name: Multi-Tech MTCDP +#@DESCRIPTION: Machine configuration for the MTCDP (Cellular Development Platform) + +TARGET_ARCH = "arm" + +PREFERRED_PROVIDER_virtual/kernel = "linux" + +PREFERRED_VERSION_linux = "2.6.32" +PREFERRED_VERSION_mts-io ?= "0.4.1" + +KERNEL_IMAGETYPE = "uImage" +UBOOT_MACHINE = "at91sam9g20ek_nandflash_config" + +PREFERRED_VERSION_at91bootstrap = "2.13" +PREFERRED_VERSION_u-boot = "1.3.4" + +#don't try to access tty1 +USE_VT = "0" + +MACHINE_FEATURES = "kernel26 ext2 usbhost usbgadget" +EXTRA_IMAGEDEPENDS += "at91bootstrap u-boot" + +# used by sysvinit_2 +SERIAL_CONSOLE = "115200 ttyS0" +IMAGE_FSTYPES ?= "jffs2" +EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n" + +require conf/machine/include/tune-arm926ejs.inc diff --git a/multitech/contrib/env-oe.sh b/multitech/contrib/env-oe.sh new file mode 100644 index 0000000..17e37a7 --- /dev/null +++ b/multitech/contrib/env-oe.sh @@ -0,0 +1,15 @@ +#!/usr/bin/env bash + +export OETREE=$(pwd) + +if [[ ! "${PATH}" =~ ${OETREE}/bitbake/bin ]]; then + export PATH=${OETREE}/bitbake/bin:${PATH} +fi + +# define if you wish to create soft links to the image in the tftpboot dir +#export TFTPBOOT_DIR=/tftpboot + +export BBPATH=${OETREE}/build:${OETREE}/openembedded +export BB_ENV_EXTRAWHITE="MACHINE DISTRO OETREE ANGSTROM_MODE ANGSTROMLIBC LIBC TFTPBOOT_DIR" + + diff --git a/multitech/contrib/local.conf b/multitech/contrib/local.conf new file mode 100644 index 0000000..3d63bb6 --- /dev/null +++ b/multitech/contrib/local.conf @@ -0,0 +1,139 @@ +# +# Multi-Tech OpenEmbedded config +# +# Please visit the Wiki at http://openembedded.org/ for more info. +# +# WARNING: lines starting with a space (' ') will result in parse failures. +# Remove '# ' from commented lines to activate them. +# +# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you. If you +# must have paths relative to your homedir use ${HOME} (note the {}'s there +# you MUST have them for the variable expansion to be done by BitBake). Your +# paths should all be absolute paths (They should all start with a / after +# expansion. Stuff like starting with ${HOME} or ${TOPDIR} is ok). + +# Use this to specify where BitBake should place the downloaded sources into +DL_DIR = "${OETREE}/sources" + +# Uncomment below to prepend user-collection dir to search path for file:// +#FILESPATHBASE =. "${OETREE}/user-collection/files:" + +# Paths to bitbake files +BBFILES = "${OETREE}/openembedded/recipes/*/*.bb ${OETREE}/user-collection/recipes/*/*.bb" + +# Setup bitbake overlays and priorities +BBFILE_COLLECTIONS = "upstream local" +BBFILE_PATTERN_upstream = "^${OETREE}/openembedded/" +BBFILE_PATTERN_local = "^${OETREE}/user-collection/" +BBFILE_PRIORITY_upstream = "1" +BBFILE_PRIORITY_local = "10" + +# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files +# This is a regular expression, so be sure to get your parenthesis balanced. +BBMASK = "" + +# Uncomment this if you want to use a prebuilt toolchain. You will need to +# provide packages for toolchain and additional libraries yourself. You also +# have to set PATH in your environment to make sure BitBake finds additional binaries. +# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc" + +# Uncomment this if you're building for an arch that uses emulated locale +# generation under qemu (mainly arm glibc) and have an external gcc 3.x compiler +# that OE recognises. This will mean the gcc-native build is skipped, speeding +# builds up. +# ASSUME_PROVIDED += "gcc3-native" + +# Select between multiple alternative providers, if more than one is eligible. +PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie" +PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-intermediate:gcc-cross-intermediate" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross" +PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross" + +# Uncomment this to specify where BitBake should create its temporary files. +# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard +# disk space, so make sure to free enough space. The default TMPDIR is +# <build directory>/tmp +# Don't use symlinks in in the path to avoid problems +TMPDIR = "${OETREE}/build/tmp" + +# Set machine type, which also sets TARGET_ARCH +MACHINE = "mtcdp" + +# Use Multi-Tech CoreCDP distribution +DISTRO = "corecdp" + +# So far, angstrom.conf sets ENABLE_BINARY_LOCALE_GENERATION +# to generate binary locale packages at build time using qemu-native and +# thereby guarantee i18n support on all devices. If your build breaks on +# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that +# this breaks i18n on devices with less than 128MB RAM) or installing +# a working third-party qemu (e.g. provided by your distribution) and +# adding qemu-native to ASSUME_PROVIDED. Caveat emptor, since third-party +# qemus lack patches needed to work with various OE targets. +ENABLE_BINARY_LOCALE_GENERATION = "0" +# ASSUME_PROVIDED += "qemu-native" + +# If ENABLE_BINARY_LOCALE_GENERATION is set to "1", you can limit locales +# generated to the list provided by GLIBC_GENERATE_LOCALES. This is huge +# time-savior for developmental builds. Format: list of locale.encoding pairs +# with spaces as separators. +# GLIBC_GENERATE_LOCALES = "en_US.UTF-8 en_GB.UTF-8 de_DE.UTF-8" + +# Add the required image file system types below. Valid are +# jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz) +# squashfs, squashfs-lzma +IMAGE_FSTYPES = "jffs2 tar" + +# Uncomment this if you want to keep the temporary rootfs +# diretory, this can be useful during development. +# (Note that this rootfs is NOT usuable as NFS export.) +IMAGE_KEEPROOTFS = "1" + +# Uncomment this to remove unpacked source and intermediate work +# after successfully building a package. +# Saves a LOT of disk space, but leaving work around is useful for debugging. +# INHERIT += "rm_work" + +# Uncomment this if you want BitBake to emit debugging output +# BBDEBUG = "yes" + +# Uncomment these two if you want BitBake to build images useful for debugging. +# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined. +# Also note that OE now produces -dbg packages which contain debugging symbols. +# DEBUG_BUILD = "1" +# INHIBIT_PACKAGE_STRIP = "1" + +# Uncomment these to build a package such that you can use gprof to profile it. +# NOTE: This will only work with 'linux' targets, not +# 'linux-uclibc', as uClibc doesn't provide the necessary +# object files. Also, don't build glibc itself with these +# flags, or it'll fail to build. +# +# PROFILE_OPTIMIZATION = "-pg" +# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}" +# LDFLAGS =+ "-pg" + +# Uncomment this to enable parallel make. +# This allows make to spawn mutliple processes to take advantage of multiple +# processors. Useful on SMP machines. This may break some packages - we're +# in the process of marking these so let us know if you find any. +PARALLEL_MAKE = "-j 2" + +# Uncomment to run multiple bitbake threads in parallel. +# Bitbake can do multiple jobs in parallel: Its a good idea make use of +# all available resources: e.g. to download sources while some other +# piece of software is compiled. +BB_NUMBER_THREADS = "2" + +# Uncomment this if you want BitBake to emit the log if a build fails. +BBINCLUDELOGS = "yes" + +# Specifies a location to search for pre-generated tarballs when fetching +# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS. +#CVS_TARBALL_STASH = "" + +# Uncomment this if you want to install shared libraries directly under their SONAME, +# rather than installing as the full version and symlinking to the SONAME. +# PACKAGE_SNAP_LIB_SYMLINKS = "1" diff --git a/multitech/contrib/ppp-masq-fw b/multitech/contrib/ppp-masq-fw new file mode 100644 index 0000000..f8b9718 --- /dev/null +++ b/multitech/contrib/ppp-masq-fw @@ -0,0 +1,34 @@ +#!/usr/bin/env bash + +# Flush all the tables first +iptables -t filter -F +iptables -t nat -F +iptables -t mangle -F + +iptables -t filter -P INPUT DROP +iptables -t filter -A INPUT -i lo -j ACCEPT +iptables -t filter -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT + +# Accept ssh from the LAN (Wired) +iptables -t filter -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT +# Accept http from the LAN (Wired) +iptables -t filter -A INPUT -i eth0 -p tcp --dport 80 -j ACCEPT +# Accept tftp from the LAN (Wired) +#iptables -t filter -A INPUT -i eth0 -p udp --dport 69 -j ACCEPT + +# Accept ssh from the WAN (Wireless) +#iptables -t filter -A INPUT -i ppp0 -p tcp --dport 22 -j ACCEPT +# Accept http from the WAN (Wireless) +#iptables -t filter -A INPUT -i ppp0 -p tcp --dport 80 -j ACCEPT + +iptables -t filter -P FORWARD DROP +iptables -t filter -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT +iptables -t filter -A FORWARD -i eth0 -o ppp0 -j ACCEPT + +iptables -t filter -P OUTPUT ACCEPT + +iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE + +# turn on packet forwarding last +echo 1 > /proc/sys/net/ipv4/ip_forward + diff --git a/multitech/contrib/uboot-setenv b/multitech/contrib/uboot-setenv new file mode 100644 index 0000000..f07f7c1 --- /dev/null +++ b/multitech/contrib/uboot-setenv @@ -0,0 +1,59 @@ +print setting U-Boot variables... +send setenv bootargs \'mem=64M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2\' +send setenv bootcmd \'nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}\' +send setenv bootdelay 3 +send setenv ipaddr 192.168.2.1 +send setenv netmask 255.255.255.0 +send setenv hostname MTCDP +send setenv serverip 192.168.2.2 +send setenv dnsip 192.168.2.3 +send setenv stdin serial +send setenv stdout serial +send setenv stderr serial +send setenv ethact macb0 +send setenv loadaddr 0x21400000 +send setenv bootstrap_file oe_bootstrap.bin +send setenv uboot_file oe_u-boot.bin +send setenv uboot_env1_file oe_uboot_env1.bin +send setenv uboot_env2_file oe_uboot_env2.bin +send setenv kernel_file oe_uImage.bin +send setenv config_file oe_config.tar.gz +send setenv oem_file oe_oem.tar.gz +send setenv rootfs_file oe_rootfs.jffs2 +send setenv bootstrap_addr 0x00000000 +send setenv uboot_addr 0x00020000 +send setenv uboot_env1_addr 0x00060000 +send setenv uboot_env2_addr 0x00080000 +send setenv kernel_addr 0x000A0000 +send setenv config_addr 0x00800000 +send setenv oem_addr 0x01000000 +send setenv rootfs_addr 0x01800000 +send setenv bootstrap_size 0x00020000 +send setenv uboot_size 0x00040000 +send setenv uboot_env1_size 0x00020000 +send setenv uboot_env2_size 0x00020000 +send setenv kernel_size 0x00760000 +send setenv config_size 0x00800000 +send setenv oem_size 0x00800000 +send setenv erase_bootstrap \'nand erase ${bootstrap_addr} ${bootstrap_size}\' +send setenv erase_uboot \'nand erase ${uboot_addr} ${uboot_size}\' +send setenv erase_uboot_env1 \'nand erase ${uboot_env1_addr} ${uboot_env1_size}\' +send setenv erase_uboot_env2 \'nand erase ${uboot_env2_addr} ${uboot_env2_size}\' +send setenv erase_kernel \'nand erase ${kernel_addr} ${kernel_size}\' +send setenv erase_config \'nand erase ${config_addr} ${config_size}\' +send setenv erase_oem \'nand erase ${oem_addr} ${oem_size}\' +send setenv erase_rootfs \'nand erase ${rootfs_addr}\' +send setenv tftp_bootstrap \'tftp ${loadaddr} ${bootstrap_file}; run erase_bootstrap; nand write.jffs2 ${fileaddr} ${bootstrap_addr} ${filesize}\' +send setenv tftp_uboot \'tftp ${loadaddr} ${uboot_file}; run erase_uboot; nand write.jffs2 ${fileaddr} ${uboot_addr} ${filesize}\' +send setenv tftp_uboot_env1 \'tftp ${loadaddr} ${uboot_env1_file}; run erase_uboot_env1; nand write.jffs2 ${fileaddr} ${uboot_env1_addr} ${filesize}\' +send setenv tftp_uboot_env2 \'tftp ${loadaddr} ${uboot_env2_file}; run erase_uboot_env2; nand write.jffs2 ${fileaddr} ${uboot_env2_addr} ${filesize}\' +send setenv tftp_kernel \'tftp ${loadaddr} ${kernel_file}; run erase_kernel; nand write.jffs2 ${fileaddr} ${kernel_addr} ${filesize}\' +send setenv tftp_config \'tftp ${loadaddr} ${config_file}; run erase_config; nand write.jffs2 ${fileaddr} ${config_addr} ${filesize}\' +send setenv tftp_oem \'tftp ${loadaddr} ${oem_file}; run erase_oem; nand write.jffs2 ${fileaddr} ${oem_addr} ${filesize}\' +send setenv tftp_rootfs \'tftp ${loadaddr} ${rootfs_file}; run erase_rootfs; nand write.jffs2 ${fileaddr} ${rootfs_addr} ${filesize}\' +send setenv krb \'run tftp_kernel; run tftp_rootfs; boot\' +send setenv rb \'run tftp_rootfs; boot\' +print saving... +send saveenv +send saveenv +send printenv diff --git a/multitech/licenses/Artistic License b/multitech/licenses/Artistic License new file mode 100644 index 0000000..5f22124 --- /dev/null +++ b/multitech/licenses/Artistic License @@ -0,0 +1,131 @@ + + + + + The "Artistic License" + + Preamble + +The intent of this document is to state the conditions under which a +Package may be copied, such that the Copyright Holder maintains some +semblance of artistic control over the development of the package, +while giving the users of the package the right to use and distribute +the Package in a more-or-less customary fashion, plus the right to make +reasonable modifications. + +Definitions: + + "Package" refers to the collection of files distributed by the + Copyright Holder, and derivatives of that collection of files + created through textual modification. + + "Standard Version" refers to such a Package if it has not been + modified, or has been modified in accordance with the wishes + of the Copyright Holder as specified below. + + "Copyright Holder" is whoever is named in the copyright or + copyrights for the package. + + "You" is you, if you're thinking about copying or distributing + this Package. + + "Reasonable copying fee" is whatever you can justify on the + basis of media cost, duplication charges, time of people involved, + and so on. (You will not be required to justify it to the + Copyright Holder, but only to the computing community at large + as a market that must bear the fee.) + + "Freely Available" means that no fee is charged for the item + itself, though there may be fees involved in handling the item. + It also means that recipients of the item may redistribute it + under the same conditions they received it. + +1. You may make and give away verbatim copies of the source form of the +Standard Version of this Package without restriction, provided that you +duplicate all of the original copyright notices and associated disclaimers. + +2. You may apply bug fixes, portability fixes and other modifications +derived from the Public Domain or from the Copyright Holder. A Package +modified in such a way shall still be considered the Standard Version. + +3. You may otherwise modify your copy of this Package in any way, provided +that you insert a prominent notice in each changed file stating how and +when you changed that file, and provided that you do at least ONE of the +following: + + a) place your modifications in the Public Domain or otherwise make them + Freely Available, such as by posting said modifications to Usenet or + an equivalent medium, or placing the modifications on a major archive + site such as uunet.uu.net, or by allowing the Copyright Holder to include + your modifications in the Standard Version of the Package. + + b) use the modified Package only within your corporation or organization. + + c) rename any non-standard executables so the names do not conflict + with standard executables, which must also be provided, and provide + a separate manual page for each non-standard executable that clearly + documents how it differs from the Standard Version. + + d) make other distribution arrangements with the Copyright Holder. + +4. You may distribute the programs of this Package in object code or +executable form, provided that you do at least ONE of the following: + + a) distribute a Standard Version of the executables and library files, + together with instructions (in the manual page or equivalent) on where + to get the Standard Version. + + b) accompany the distribution with the machine-readable source of + the Package with your modifications. + + c) give non-standard executables non-standard names, and clearly + document the differences in manual pages (or equivalent), together + with instructions on where to get the Standard Version. + + d) make other distribution arrangements with the Copyright Holder. + +5. You may charge a reasonable copying fee for any distribution of this +Package. You may charge any fee you choose for support of this +Package. You may not charge a fee for this Package itself. However, +you may distribute this Package in aggregate with other (possibly +commercial) programs as part of a larger (possibly commercial) software +distribution provided that you do not advertise this Package as a +product of your own. You may embed this Package's interpreter within +an executable of yours (by linking); this shall be construed as a mere +form of aggregation, provided that the complete Standard Version of the +interpreter is so embedded. + +6. The scripts and library files supplied as input to or produced as +output from the programs of this Package do not automatically fall +under the copyright of this Package, but belong to whoever generated +them, and may be sold commercially, and may be aggregated with this +Package. If such scripts or library files are aggregated with this +Package via the so-called "undump" or "unexec" methods of producing a +binary executable image, then distribution of such an image shall +neither be construed as a distribution of this Package nor shall it +fall under the restrictions of Paragraphs 3 and 4, provided that you do +not represent such an executable image as a Standard Version of this +Package. + +7. C subroutines (or comparably compiled subroutines in other +languages) supplied by you and linked into this Package in order to +emulate subroutines and variables of the language defined by this +Package shall not be considered part of this Package, but are the +equivalent of input as in Paragraph 6, provided these subroutines do +not change the language in any way that would cause it to fail the +regression tests for the language. + +8. Aggregation of this Package with a commercial distribution is always +permitted provided that the use of this Package is embedded; that is, +when no overt attempt is made to make this Package's interfaces visible +to the end user of the commercial distribution. Such use shall not be +construed as a distribution of this Package. + +9. The name of the Copyright Holder may not be used to endorse or promote +products derived from this software without specific prior written permission. + +10. THIS PACKAGE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR +IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED +WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + + The End diff --git a/multitech/licenses/BSD b/multitech/licenses/BSD new file mode 100644 index 0000000..c7a0aa4 --- /dev/null +++ b/multitech/licenses/BSD @@ -0,0 +1,26 @@ +Copyright (c) The Regents of the University of California. +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. +3. Neither the name of the University nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE +FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +SUCH DAMAGE. diff --git a/multitech/licenses/C-KERMIT LICENSE b/multitech/licenses/C-KERMIT LICENSE new file mode 100644 index 0000000..da5d39e --- /dev/null +++ b/multitech/licenses/C-KERMIT LICENSE @@ -0,0 +1,106 @@ +THE C-KERMIT 7.0 AND 8.0 LICENSE + + Last update: Thu May 1 13:52:15 2003 + +This is the new C-Kermit 7.0 and 8.0 license. The intention is to allow +C-Kermit to be distributed with "free" operating systems such as GNU/Linux, +FreeBSD, NetBSD, OpenBSD, The Hurd, etc, even when the distributions +themselves (such as Red Hat or Caldera) might be sold and/or might include +applications that are not free, and yet still require a license to include +C-Kermit in or with "non-free" products such as commercial OS's, commercial +software packages, embedded systems, and hardware (other than general-purpose +computers preloaded with "free" operating systems), since these licenses +furnish a large portion of the Kermit Project's funding. + +There have been some questions about the provision in Clause (A) that: + + The + C-Kermit source code may not be changed without the consent of the + Kermit Project, which will not be unreasonably withheld (this is + simply a matter of keeping a consistent and supportable code base). + +The intention of this clause is primarily to make sure that anybody who +makes modifications sends them back to us, since we are the ones have to +support C-Kermit, and so we can carry them through to future releases (so +you don't have to make the same changes again and again). + +Secondarily it is to protect Columbia University in the unlikely event of +modifications made with deliberate intent to offend or cause damage. + +Any redistributor of C-Kermit under Clause (A) below should rest assured +there is no intention of preventing them from constructing a distribution in +the appropriate format (RPM or whatever) for their product or from issuing +any patches required for their products; we simply want to be informed so we +can maintain a consistent code base and a solid, supportable software +package. We are happy to work with any redistributor an any issues that +concern them. If you have questions, send them to kermit@columbia.edu. + +Note: All changes to this file since 1 January 2000 (the C-Kermit 7.0 +release date) are above; the license itself has not changed, except to +update the most recent copyright date. + +(Begin) + +Copyright (C) 1985, 2003, + The Trustees of Columbia University in the City of New York. + All rights reserved. + +PERMISSIONS: + +The C-Kermit software may be obtained directly from the Kermit Project at +Columbia University (or from any source explicitly licensed by the Kermit +Project or implicitly licensed by Clause (A) below) by any individual for +his or her OWN USE, and by any company or other organization for its own +INTERNAL DISTRIBUTION and use, including installation on servers that are +accessed by customers or clients, WITHOUT EXPLICIT LICENSE. + +Conditions for REDISTRIBUTION are as follows: + +(A) The C-Kermit software, in source and/or binary form, may be + included WITHOUT EXPLICIT LICENSE in distributions of OPERATING + SYSTEMS that have OSI (Open Source Initiative, www.opensource.org) + approved licenses, even if non-Open-Source applications (but not + operating systems) are included in the same distribution. Such + distributions include, but are not limited to, CD-ROM, FTP site, + Web site, or preinstalled software on a new GENERAL-PURPOSE + computer, as long as the primary character of the distribution is + an Open Source operating system with accompanying utilities. The + C-Kermit source code may not be changed without the consent of the + Kermit Project, which will not be unreasonably withheld (this is + simply a matter of keeping a consistent and supportable code base). + +(B) Inclusion of C-Kermit software in whole or in part, in any form, in + or with any product not covered by Clause (A), or its distribution + by any commercial enterprise to its actual or potential customers + or clients except as in Clause (A), requires a license from the + Kermit Project, Columbia University; contact kermit@columbia.edu. + +The name of Columbia University may not be used to endorse or promote +products derived from or including the C-Kermit software without specific +prior written permission. + +DISCLAIMER: + + THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION FROM THE + TRUSTEES OF COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK AS TO ITS + FITNESS FOR ANY PURPOSE, AND WITHOUT WARRANTY BY THE TRUSTEES OF + COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK OF ANY KIND, EITHER + EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. + THE TRUSTEES OF COLUMBIA UNIVERSITY IN THE CITY OF NEW YORK SHALL NOT + BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, + OR CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM ARISING OUT OF OR + IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN IF IT HAS BEEN OR IS + HEREAFTER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU SHALL + INDEMNIFY AND HOLD HARMLESS THE TRUSTEES OF COLUMBIA UNIVERSITY IN + THE CITY OF NEW YORK, ITS EMPLOYEES AND AGENTS FROM AND AGAINST ANY + AND ALL CLAIMS, DEMANDS, LOSS, DAMAGE OR EXPENSE (INCLUDING + ATTORNEYS' FEES) ARISING OUT OF YOUR USE OF THIS SOFTWARE. + +The above copyright notice, permissions notice, and disclaimer may not be +removed, altered, or obscured and shall be included in all copies of the +C-Kermit software. The Trustees of Columbia University in the City of +New York reserve the right to revoke this permission if any of the terms +of use set forth above are breached. + +(End) diff --git a/multitech/licenses/CUPS License b/multitech/licenses/CUPS License new file mode 100644 index 0000000..4a3e913 --- /dev/null +++ b/multitech/licenses/CUPS License @@ -0,0 +1,961 @@ + Common UNIX Printing System License Agreement + + Copyright 1997-2007 by Easy Software Products + 44141 AIRPORT VIEW DR STE 204 + HOLLYWOOD, MARYLAND 20636 USA + + Voice: +1.301.373.9600 + Email: cups-info@cups.org + WWW: http://www.cups.org + + +INTRODUCTION + +The Common UNIX Printing System(tm), ("CUPS(tm)"), is provided +under the GNU General Public License ("GPL") and GNU Library +General Public License ("LGPL"), Version 2, with exceptions for +Apple operating systems and the OpenSSL toolkit. A copy of the +exceptions and licenses follow this introduction. + +The GNU LGPL applies to the CUPS and CUPS Imaging libraries +located in the "cups" and "filter" subdirectories of the CUPS +source distribution and in the "cups" include directory and +library files in the binary distributions. The GNU GPL applies to +the remainder of the CUPS distribution, including the "pdftops" +filter which is based upon Xpdf. + +For those not familiar with the GNU GPL, the license basically +allows you to: + + - Use the CUPS software at no charge. + - Distribute verbatim copies of the software in source or + binary form. + - Sell verbatim copies of the software for a media fee, or + sell support for the software. + +What this license *does not* allow you to do is make changes or +add features to CUPS and then sell a binary distribution without +source code. You must provide source for any changes or additions +to the software, and all code must be provided under the GPL or +LGPL as appropriate. The only exceptions to this are the portions +of the CUPS software covered by the Apple operating system +license exceptions outlined later in this license agreement. + +The GNU LGPL relaxes the "link-to" restriction, allowing you to +develop applications that use the CUPS and CUPS Imaging libraries +under other licenses and/or conditions as appropriate for your +application, driver, or filter. + + +LICENSE EXCEPTIONS + +In addition, as the copyright holder of CUPS, Easy Software +Products grants the following special exceptions: + + 1. Apple Operating System Development License Exception; + + a. Software that is developed by any person or entity + for an Apple Operating System ("Apple OS-Developed + Software"), including but not limited to Apple and + third party printer drivers, filters, and backends + for an Apple Operating System, that is linked to the + CUPS imaging library or based on any sample filters + or backends provided with CUPS shall not be + considered to be a derivative work or collective work + based on the CUPS program and is exempt from the + mandatory source code release clauses of the GNU GPL. + You may therefore distribute linked combinations of + the CUPS imaging library with Apple OS-Developed + Software without releasing the source code of the + Apple OS-Developed Software. You may also use sample + filters and backends provided with CUPS to develop + Apple OS-Developed Software without releasing the + source code of the Apple OS-Developed Software. + + b. An Apple Operating System means any operating system + software developed and/or marketed by Apple Computer, + Inc., including but not limited to all existing + releases and versions of Apple's Darwin, Mac OS X, + and Mac OS X Server products and all follow-on + releases and future versions thereof. + + c. This exception is only available for Apple + OS-Developed Software and does not apply to software + that is distributed for use on other operating + systems. + + d. All CUPS software that falls under this license + exception have the following text at the top of each + source file: + + This file is subject to the Apple OS-Developed + Software exception. + + 2. OpenSSL Toolkit License Exception; + + a. Easy Software Products explicitly allows the + compilation and distribution of the CUPS software + with the OpenSSL Toolkit. + +No developer is required to provide these exceptions in a +derived work. + + +TRADEMARKS + +Easy Software Products has trademarked the Common UNIX Printing +System, CUPS, and CUPS logo. You may use these names and logos +in any direct port or binary distribution of CUPS. Please +contact Easy Software Products for written permission to use +them in derivative products. Our intention is to protect the +value of these trademarks and ensure that any derivative product +meets the same high-quality standards as the original. + + +BINARY DISTRIBUTION RIGHTS + +Easy Software Products also sells rights to the CUPS source code +under a binary distribution license for vendors that are unable +to release source code for their additions and modifications to +CUPS under the GNU GPL and LGPL. For information please contact +us at the address shown above. + +The Common UNIX Printing System provides a "pdftops" filter that +is based on the Xpdf software. For binary distribution licensing +of this software, please contact: + + Derek B. Noonburg + Email: derekn@glyphandcog.com + WWW: http://www.glyphandcog.com/ + + +SUPPORT + +Easy Software Products sells software support for CUPS as well +as a commercial printing product based on CUPS called ESP Print +Pro. You can find out more at our web site: + + http://www.easysw.com/ + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. + + GNU LIBRARY GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + [This is the first released version of the library GPL. It is + numbered 2 because it goes with version 2 of the ordinary GPL.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Library General Public License, applies to some +specially designated Free Software Foundation software, and to any +other libraries whose authors decide to use it. You can use it for +your libraries, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if +you distribute copies of the library, or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link a program with the library, you must provide +complete object files to the recipients so that they can relink them +with the library, after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + Our method of protecting your rights has two steps: (1) copyright +the library, and (2) offer you this license which gives you legal +permission to copy, distribute and/or modify the library. + + Also, for each distributor's protection, we want to make certain +that everyone understands that there is no warranty for this free +library. If the library is modified by someone else and passed on, we +want its recipients to know that what they have is not the original +version, so that any problems introduced by others will not reflect on +the original authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that companies distributing free +software will individually obtain patent licenses, thus in effect +transforming the program into proprietary software. To prevent this, +we have made it clear that any patent must be licensed for everyone's +free use or not licensed at all. + + Most GNU software, including some libraries, is covered by the ordinary +GNU General Public License, which was designed for utility programs. This +license, the GNU Library General Public License, applies to certain +designated libraries. This license is quite different from the ordinary +one; be sure to read it in full, and don't assume that anything in it is +the same as in the ordinary license. + + The reason we have a separate public license for some libraries is that +they blur the distinction we usually make between modifying or adding to a +program and simply using it. Linking a program with a library, without +changing the library, is in some sense simply using the library, and is +analogous to running a utility program or application program. However, in +a textual and legal sense, the linked executable is a combined work, a +derivative of the original library, and the ordinary General Public License +treats it as such. + + Because of this blurred distinction, using the ordinary General +Public License for libraries did not effectively promote software +sharing, because most developers did not use the libraries. We +concluded that weaker conditions might promote sharing better. + + However, unrestricted linking of non-free programs would deprive the +users of those programs of all benefit from the free status of the +libraries themselves. This Library General Public License is intended to +permit developers of non-free programs to use free libraries, while +preserving your freedom as a user of such programs to change the free +libraries that are incorporated in them. (We have not seen how to achieve +this as regards changes in header files, but we have achieved it as regards +changes in the actual functions of the Library.) The hope is that this +will lead to faster development of free libraries. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, while the latter only +works together with the library. + + Note that it is possible for a library to be covered by the ordinary +General Public License rather than by this special one. + + GNU LIBRARY GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library which +contains a notice placed by the copyright holder or other authorized +party saying it may be distributed under the terms of this Library +General Public License (also called "this License"). Each licensee is +addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also compile or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + c) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + d) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the source code distributed need not include anything that is normally +distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Library General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + <one line to give the library's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + <signature of Ty Coon>, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/multitech/licenses/DEC-MIT License b/multitech/licenses/DEC-MIT License new file mode 100644 index 0000000..cfa79e7 --- /dev/null +++ b/multitech/licenses/DEC-MIT License @@ -0,0 +1,63 @@ +Copyright 1991 by Digital Equipment Corporation, Maynard, Massachusetts, +and the Massachusetts Institute of Technology, Cambridge, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the names of Digital or MIT not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the XFree86 Project shall not +be used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the XFree86 Project. + + +Copyright (c) 2004 The Unichrome Project. All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHOR(S) OR COPYRIGHT HOLDER(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. diff --git a/multitech/licenses/Daniel Stenberg b/multitech/licenses/Daniel Stenberg new file mode 100644 index 0000000..048cf56 --- /dev/null +++ b/multitech/licenses/Daniel Stenberg @@ -0,0 +1,21 @@ +COPYRIGHT AND PERMISSION NOTICE + +Copyright (c) 1996 - 2009, Daniel Stenberg, <daniel@haxx.se>. + +All rights reserved. + +Permission to use, copy, modify, and distribute this software for any purpose +with or without fee is hereby granted, provided that the above copyright +notice and this permission notice appear in all copies. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN +NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE +OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of a copyright holder shall not +be used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization of the copyright holder. diff --git a/multitech/licenses/David A Schleef b/multitech/licenses/David A Schleef new file mode 100644 index 0000000..ad30600 --- /dev/null +++ b/multitech/licenses/David A Schleef @@ -0,0 +1,92 @@ + +The majority of the source code and the collective work is subject +to the following license: + + Copyright 2002,2003,2004,2005 David A. Schleef <ds@schleef.org> + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + + +The source code in the liboil/motovec directory is subject to the +following license: + + Copyright Motorola, Inc. 2003 + ALL RIGHTS RESERVED + + You are hereby granted a copyright license to use, modify, and + distribute the SOFTWARE so long as this entire notice is retained + without alteration in any modified and/or redistributed versions, + and that such modified versions are clearly identified as such. + No licenses are granted by implication, estoppel or otherwise under + any patents or trademarks of Motorola, Inc. + + The SOFTWARE is provided on an "AS IS" basis and without warranty. + To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS + ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED + WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR + PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH + REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS + THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS. + + To the maximum extent permitted by applicable law, IN NO EVENT SHALL + MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER + (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF + BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS + INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR + INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility + for the maintenance and support of the SOFTWARE. + + +The source code implementing the Mersenne Twister algorithm is +subject to the following license: + + Copyright (C) 1997 - 2002, Makoto Matsumoto and Takuji Nishimura, + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The names of its contributors may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/multitech/licenses/GFDL-1.2 b/multitech/licenses/GFDL-1.2 new file mode 100644 index 0000000..4a0fe1c --- /dev/null +++ b/multitech/licenses/GFDL-1.2 @@ -0,0 +1,397 @@ + GNU Free Documentation License + Version 1.2, November 2002 + + + Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. + 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + +0. PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document "free" in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of "copyleft", which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + + +1. APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The "Document", below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as "you". You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A "Modified Version" of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A "Secondary Section" is a named appendix or a front-matter section of +the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall subject +(or to related matters) and contains nothing that could fall directly +within that overall subject. (Thus, if the Document is in part a +textbook of mathematics, a Secondary Section may not explain any +mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The "Invariant Sections" are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The "Cover Texts" are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A "Transparent" copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not "Transparent" is called "Opaque". + +Examples of suitable formats for Transparent copies include plain +ASCII without markup, Texinfo input format, LaTeX input format, SGML +or XML using a publicly available DTD, and standard-conforming simple +HTML, PostScript or PDF designed for human modification. Examples of +transparent image formats include PNG, XCF and JPG. Opaque formats +include proprietary formats that can be read and edited only by +proprietary word processors, SGML or XML for which the DTD and/or +processing tools are not generally available, and the +machine-generated HTML, PostScript or PDF produced by some word +processors for output purposes only. + +The "Title Page" means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, "Title Page" means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +A section "Entitled XYZ" means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as "Acknowledgements", +"Dedications", "Endorsements", or "History".) To "Preserve the Title" +of such a section when you modify the Document means that it remains a +section "Entitled XYZ" according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + + +2. VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + + +3. COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + + +4. MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +A. Use in the Title Page (and on the covers, if any) a title distinct + from that of the Document, and from those of previous versions + (which should, if there were any, be listed in the History section + of the Document). You may use the same title as a previous version + if the original publisher of that version gives permission. +B. List on the Title Page, as authors, one or more persons or entities + responsible for authorship of the modifications in the Modified + Version, together with at least five of the principal authors of the + Document (all of its principal authors, if it has fewer than five), + unless they release you from this requirement. +C. State on the Title page the name of the publisher of the + Modified Version, as the publisher. +D. Preserve all the copyright notices of the Document. +E. Add an appropriate copyright notice for your modifications + adjacent to the other copyright notices. +F. Include, immediately after the copyright notices, a license notice + giving the public permission to use the Modified Version under the + terms of this License, in the form shown in the Addendum below. +G. Preserve in that license notice the full lists of Invariant Sections + and required Cover Texts given in the Document's license notice. +H. Include an unaltered copy of this License. +I. Preserve the section Entitled "History", Preserve its Title, and add + to it an item stating at least the title, year, new authors, and + publisher of the Modified Version as given on the Title Page. If + there is no section Entitled "History" in the Document, create one + stating the title, year, authors, and publisher of the Document as + given on its Title Page, then add an item describing the Modified + Version as stated in the previous sentence. +J. Preserve the network location, if any, given in the Document for + public access to a Transparent copy of the Document, and likewise + the network locations given in the Document for previous versions + it was based on. These may be placed in the "History" section. + You may omit a network location for a work that was published at + least four years before the Document itself, or if the original + publisher of the version it refers to gives permission. +K. For any section Entitled "Acknowledgements" or "Dedications", + Preserve the Title of the section, and preserve in the section all + the substance and tone of each of the contributor acknowledgements + and/or dedications given therein. +L. Preserve all the Invariant Sections of the Document, + unaltered in their text and in their titles. Section numbers + or the equivalent are not considered part of the section titles. +M. Delete any section Entitled "Endorsements". Such a section + may not be included in the Modified Version. +N. Do not retitle any existing section to be Entitled "Endorsements" + or to conflict in title with any Invariant Section. +O. Preserve any Warranty Disclaimers. + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled "Endorsements", provided it contains +nothing but endorsements of your Modified Version by various +parties--for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + + +5. COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled "History" +in the various original documents, forming one section Entitled +"History"; likewise combine any sections Entitled "Acknowledgements", +and any sections Entitled "Dedications". You must delete all sections +Entitled "Endorsements". + + +6. COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + + +7. AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an "aggregate" if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + + +8. TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled "Acknowledgements", +"Dedications", or "History", the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + + +9. TERMINATION + +You may not copy, modify, sublicense, or distribute the Document except +as expressly provided for under this License. Any other attempt to +copy, modify, sublicense or distribute the Document is void, and will +automatically terminate your rights under this License. However, +parties who have received copies, or rights, from you under this +License will not have their licenses terminated so long as such +parties remain in full compliance. + + +10. FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +http://www.gnu.org/copyleft/. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License "or any later version" applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. + + +ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + + Copyright (c) YEAR YOUR NAME. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.2 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. + A copy of the license is included in the section entitled "GNU + Free Documentation License". + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the "with...Texts." line with this: + + with the Invariant Sections being LIST THEIR TITLES, with the + Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. diff --git a/multitech/licenses/GPL-V1 b/multitech/licenses/GPL-V1 new file mode 100644 index 0000000..43cd72c --- /dev/null +++ b/multitech/licenses/GPL-V1 @@ -0,0 +1,248 @@ + GNU GENERAL PUBLIC LICENSE + Version 1, February 1989 + + Copyright (C) 1989 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The license agreements of most software companies try to keep users +at the mercy of those companies. By contrast, our General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. The +General Public License applies to the Free Software Foundation's +software and to any other program whose authors commit to using it. +You can use it for your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Specifically, the General Public License is designed to make +sure that you have the freedom to give away or sell copies of free +software, that you receive source code or can get it if you want it, +that you can change the software or use pieces of it in new free +programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of a such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must tell them their rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any program or other work which +contains a notice placed by the copyright holder saying it may be +distributed under the terms of this General Public License. The +"Program", below, refers to any such program or work, and a "work based +on the Program" means either the Program or any work containing the +Program or a portion of it, either verbatim or with modifications. Each +licensee is addressed as "you". + + 1. You may copy and distribute verbatim copies of the Program's source +code as you receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice and +disclaimer of warranty; keep intact all the notices that refer to this +General Public License and to the absence of any warranty; and give any +other recipients of the Program a copy of this General Public License +along with the Program. You may charge a fee for the physical act of +transferring a copy. + + 2. You may modify your copy or copies of the Program or any portion of +it, and copy and distribute such modifications under the terms of Paragraph +1 above, provided that you also do the following: + + a) cause the modified files to carry prominent notices stating that + you changed the files and the date of any change; and + + b) cause the whole of any work that you distribute or publish, that + in whole or in part contains the Program or any part thereof, either + with or without modifications, to be licensed at no charge to all + third parties under the terms of this General Public License (except + that you may choose to grant warranty protection to some or all + third parties, at your option). + + c) If the modified program normally reads commands interactively when + run, you must cause it, when started running for such interactive use + in the simplest and most usual way, to print or display an + announcement including an appropriate copyright notice and a notice + that there is no warranty (or else, saying that you provide a + warranty) and that users may redistribute the program under these + conditions, and telling the user how to view a copy of this General + Public License. + + d) You may charge a fee for the physical act of transferring a + copy, and you may at your option offer warranty protection in + exchange for a fee. + +Mere aggregation of another independent work with the Program (or its +derivative) on a volume of a storage or distribution medium does not bring +the other work under the scope of these terms. + + 3. You may copy and distribute the Program (or a portion or derivative of +it, under Paragraph 2) in object code or executable form under the terms of +Paragraphs 1 and 2 above provided that you also do one of the following: + + a) accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of + Paragraphs 1 and 2 above; or, + + b) accompany it with a written offer, valid for at least three + years, to give any third party free (except for a nominal charge + for the cost of distribution) a complete machine-readable copy of the + corresponding source code, to be distributed under the terms of + Paragraphs 1 and 2 above; or, + + c) accompany it with the information you received as to where the + corresponding source code may be obtained. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form alone.) + +Source code for a work means the preferred form of the work for making +modifications to it. For an executable file, complete source code means +all the source code for all modules it contains; but, as a special +exception, it need not include source code for modules which are standard +libraries that accompany the operating system on which the executable +file runs, or for standard header files or definitions files that +accompany that operating system. + + 4. You may not copy, modify, sublicense, distribute or transfer the +Program except as expressly provided under this General Public License. +Any attempt otherwise to copy, modify, sublicense, distribute or transfer +the Program is void, and will automatically terminate your rights to use +the Program under this License. However, parties who have received +copies, or rights to use copies, from you under this General Public +License will not have their licenses terminated so long as such parties +remain in full compliance. + + 5. By copying, distributing or modifying the Program (or any work based +on the Program) you indicate your acceptance of this license to do so, +and all its terms and conditions. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the original +licensor to copy, distribute or modify the Program subject to these +terms and conditions. You may not impose any further restrictions on the +recipients' exercise of the rights granted herein. + + 7. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of the license which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +the license, you may choose any version ever published by the Free Software +Foundation. + + 8. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 9. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 10. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to humanity, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + + To do so, attach the following notices to the program. It is safest to +attach them to the start of each source file to most effectively convey +the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 1, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software Foundation, + Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19xx name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the +appropriate parts of the General Public License. Of course, the +commands you use may be called something other than `show w' and `show +c'; they could even be mouse-clicks or menu items--whatever suits your +program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + program `Gnomovision' (a program to direct compilers to make passes + at assemblers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/multitech/licenses/GPL-V2 b/multitech/licenses/GPL-V2 new file mode 100644 index 0000000..d60c31a --- /dev/null +++ b/multitech/licenses/GPL-V2 @@ -0,0 +1,340 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/multitech/licenses/GPL-V3 b/multitech/licenses/GPL-V3 new file mode 100644 index 0000000..94a9ed0 --- /dev/null +++ b/multitech/licenses/GPL-V3 @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + <program> Copyright (C) <year> <name of author> + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +<http://www.gnu.org/licenses/>. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/multitech/licenses/Jan Kneschke b/multitech/licenses/Jan Kneschke new file mode 100644 index 0000000..1333e45 --- /dev/null +++ b/multitech/licenses/Jan Kneschke @@ -0,0 +1,31 @@ + + +Copyright (c) 2004, Jan Kneschke, incremental + All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +- Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. + +- Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +- Neither the name of the 'incremental' nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/multitech/licenses/JasPer License b/multitech/licenses/JasPer License new file mode 100644 index 0000000..f817ef4 --- /dev/null +++ b/multitech/licenses/JasPer License @@ -0,0 +1,51 @@ +JasPer License Version 2.0 + +Copyright (c) 2001-2006 Michael David Adams +Copyright (c) 1999-2000 Image Power, Inc. +Copyright (c) 1999-2000 The University of British Columbia + +All rights reserved. + +Permission is hereby granted, free of charge, to any person (the +"User") obtaining a copy of this software and associated documentation +files (the "Software"), to deal in the Software without restriction, +including without limitation the rights to use, copy, modify, merge, +publish, distribute, and/or sell copies of the Software, and to permit +persons to whom the Software is furnished to do so, subject to the +following conditions: + +1. The above copyright notices and this permission notice (which +includes the disclaimer below) shall be included in all copies or +substantial portions of the Software. + +2. The name of a copyright holder shall not be used to endorse or +promote products derived from the Software without specific prior +written permission. + +THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS +LICENSE. NO USE OF THE SOFTWARE IS AUTHORIZED HEREUNDER EXCEPT UNDER +THIS DISCLAIMER. THE SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS +"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A +PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO +EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL +INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING +FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, +NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION +WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. NO ASSURANCES ARE +PROVIDED BY THE COPYRIGHT HOLDERS THAT THE SOFTWARE DOES NOT INFRINGE +THE PATENT OR OTHER INTELLECTUAL PROPERTY RIGHTS OF ANY OTHER ENTITY. +EACH COPYRIGHT HOLDER DISCLAIMS ANY LIABILITY TO THE USER FOR CLAIMS +BROUGHT BY ANY OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL +PROPERTY RIGHTS OR OTHERWISE. AS A CONDITION TO EXERCISING THE RIGHTS +GRANTED HEREUNDER, EACH USER HEREBY ASSUMES SOLE RESPONSIBILITY TO SECURE +ANY OTHER INTELLECTUAL PROPERTY RIGHTS NEEDED, IF ANY. THE SOFTWARE +IS NOT FAULT-TOLERANT AND IS NOT INTENDED FOR USE IN MISSION-CRITICAL +SYSTEMS, SUCH AS THOSE USED IN THE OPERATION OF NUCLEAR FACILITIES, +AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL +SYSTEMS, DIRECT LIFE SUPPORT MACHINES, OR WEAPONS SYSTEMS, IN WHICH +THE FAILURE OF THE SOFTWARE OR SYSTEM COULD LEAD DIRECTLY TO DEATH, +PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH +RISK ACTIVITIES"). THE COPYRIGHT HOLDERS SPECIFICALLY DISCLAIM ANY +EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES. + diff --git a/multitech/licenses/Julian R Seward b/multitech/licenses/Julian R Seward new file mode 100644 index 0000000..f420cff --- /dev/null +++ b/multitech/licenses/Julian R Seward @@ -0,0 +1,42 @@ + +-------------------------------------------------------------------------- + +This program, "bzip2", the associated library "libbzip2", and all +documentation, are copyright (C) 1996-2007 Julian R Seward. All +rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +2. The origin of this software must not be misrepresented; you must + not claim that you wrote the original software. If you use this + software in a product, an acknowledgment in the product + documentation would be appreciated but is not required. + +3. Altered source versions must be plainly marked as such, and must + not be misrepresented as being the original software. + +4. The name of the author may not be used to endorse or promote + products derived from this software without specific prior written + permission. + +THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Julian Seward, jseward@bzip.org +bzip2/libbzip2 version 1.0.5 of 10 December 2007 + +-------------------------------------------------------------------------- diff --git a/multitech/licenses/Keith Packard b/multitech/licenses/Keith Packard new file mode 100644 index 0000000..a97b6e6 --- /dev/null +++ b/multitech/licenses/Keith Packard @@ -0,0 +1,20 @@ +Copyright © 2001,2003 Keith Packard + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of Keith Packard not be used in +advertising or publicity pertaining to distribution of the software without +specific, written prior permission. Keith Packard makes no +representations about the suitability of this software for any purpose. It +is provided "as is" without express or implied warranty. + +KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + diff --git a/multitech/licenses/LGPL-V2 b/multitech/licenses/LGPL-V2 new file mode 100644 index 0000000..f503049 --- /dev/null +++ b/multitech/licenses/LGPL-V2 @@ -0,0 +1,481 @@ + GNU LIBRARY GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the library GPL. It is + numbered 2 because it goes with version 2 of the ordinary GPL.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Library General Public License, applies to some +specially designated Free Software Foundation software, and to any +other libraries whose authors decide to use it. You can use it for +your libraries, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if +you distribute copies of the library, or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link a program with the library, you must provide +complete object files to the recipients so that they can relink them +with the library, after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + Our method of protecting your rights has two steps: (1) copyright +the library, and (2) offer you this license which gives you legal +permission to copy, distribute and/or modify the library. + + Also, for each distributor's protection, we want to make certain +that everyone understands that there is no warranty for this free +library. If the library is modified by someone else and passed on, we +want its recipients to know that what they have is not the original +version, so that any problems introduced by others will not reflect on +the original authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that companies distributing free +software will individually obtain patent licenses, thus in effect +transforming the program into proprietary software. To prevent this, +we have made it clear that any patent must be licensed for everyone's +free use or not licensed at all. + + Most GNU software, including some libraries, is covered by the ordinary +GNU General Public License, which was designed for utility programs. This +license, the GNU Library General Public License, applies to certain +designated libraries. This license is quite different from the ordinary +one; be sure to read it in full, and don't assume that anything in it is +the same as in the ordinary license. + + The reason we have a separate public license for some libraries is that +they blur the distinction we usually make between modifying or adding to a +program and simply using it. Linking a program with a library, without +changing the library, is in some sense simply using the library, and is +analogous to running a utility program or application program. However, in +a textual and legal sense, the linked executable is a combined work, a +derivative of the original library, and the ordinary General Public License +treats it as such. + + Because of this blurred distinction, using the ordinary General +Public License for libraries did not effectively promote software +sharing, because most developers did not use the libraries. We +concluded that weaker conditions might promote sharing better. + + However, unrestricted linking of non-free programs would deprive the +users of those programs of all benefit from the free status of the +libraries themselves. This Library General Public License is intended to +permit developers of non-free programs to use free libraries, while +preserving your freedom as a user of such programs to change the free +libraries that are incorporated in them. (We have not seen how to achieve +this as regards changes in header files, but we have achieved it as regards +changes in the actual functions of the Library.) The hope is that this +will lead to faster development of free libraries. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, while the latter only +works together with the library. + + Note that it is possible for a library to be covered by the ordinary +General Public License rather than by this special one. + + GNU LIBRARY GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library which +contains a notice placed by the copyright holder or other authorized +party saying it may be distributed under the terms of this Library +General Public License (also called "this License"). Each licensee is +addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also compile or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + c) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + d) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the source code distributed need not include anything that is normally +distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Library General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + <one line to give the library's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + <signature of Ty Coon>, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/multitech/licenses/LGPL-V2.1 b/multitech/licenses/LGPL-V2.1 new file mode 100644 index 0000000..b1e3f5a --- /dev/null +++ b/multitech/licenses/LGPL-V2.1 @@ -0,0 +1,504 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + <one line to give the library's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + <signature of Ty Coon>, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff --git a/multitech/licenses/LGPL-V3 b/multitech/licenses/LGPL-V3 new file mode 100644 index 0000000..fc8a5de --- /dev/null +++ b/multitech/licenses/LGPL-V3 @@ -0,0 +1,165 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. diff --git a/multitech/licenses/LIBCAP License b/multitech/licenses/LIBCAP License new file mode 100644 index 0000000..9289476 --- /dev/null +++ b/multitech/licenses/LIBCAP License @@ -0,0 +1,41 @@ +Unless otherwise *explicitly* stated, the following text describes the +licensed conditions under which the contents of this libcap release +may be used and distributed: + +------------------------------------------------------------------------- +Redistribution and use in source and binary forms of libcap, with +or without modification, are permitted provided that the following +conditions are met: + +1. Redistributions of source code must retain any existing copyright + notice, and this entire permission notice in its entirety, + including the disclaimer of warranties. + +2. Redistributions in binary form must reproduce all prior and current + copyright notices, this list of conditions, and the following + disclaimer in the documentation and/or other materials provided + with the distribution. + +3. The name of any author may not be used to endorse or promote + products derived from this software without their specific prior + written permission. + +ALTERNATIVELY, this product may be distributed under the terms of the +GNU General Public License, in which case the provisions of the GNU +GPL are required INSTEAD OF the above restrictions. (This clause is +necessary due to a potential conflict between the GNU GPL and the +restrictions contained in a BSD-style copyright.) + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. +IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR +TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH +DAMAGE. +------------------------------------------------------------------------- + diff --git a/multitech/licenses/LIBGSM License b/multitech/licenses/LIBGSM License new file mode 100644 index 0000000..eba0e52 --- /dev/null +++ b/multitech/licenses/LIBGSM License @@ -0,0 +1,16 @@ +Copyright 1992, 1993, 1994 by Jutta Degener and Carsten Bormann, +Technische Universitaet Berlin + +Any use of this software is permitted provided that this notice is not +removed and that neither the authors nor the Technische Universitaet Berlin +are deemed to have made any representations as to the suitability of this +software for any purpose nor are held responsible for any defects of +this software. THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE. + +As a matter of courtesy, the authors request to be informed about uses +this software has found, about bugs in this software, and about any +improvements that may be of general interest. + +Berlin, 28.11.1994 +Jutta Degener +Carsten Bormann diff --git a/multitech/licenses/LIBPNG License b/multitech/licenses/LIBPNG License new file mode 100644 index 0000000..3a20084 --- /dev/null +++ b/multitech/licenses/LIBPNG License @@ -0,0 +1,111 @@ + +This copy of the libpng notices is provided for your convenience. In case of +any discrepancy between this copy and the notices in the file png.h that is +included in the libpng distribution, the latter shall prevail. + +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: + +If you modify libpng you may insert additional notices immediately following +this sentence. + +This code is released under the libpng license. + +libpng versions 1.2.6, August 15, 2004, through 1.2.41, December 3, 2009, are +Copyright (c) 2004, 2006-2009 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.2.5 +with the following individual added to the list of Contributing Authors + + Cosmin Truta + +libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are +Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-1.0.6 +with the following individuals added to the list of Contributing Authors + + Simon-Pierre Cadieux + Eric S. Raymond + Gilles Vollant + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of the + library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is with + the user. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are +distributed according to the same disclaimer and license as libpng-0.96, +with the following individuals added to the list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996, 1997 Andreas Dilger +Distributed according to the same disclaimer and license as libpng-0.88, +with the following individuals added to the list of Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing Authors +and Group 42, Inc. disclaim all warranties, expressed or implied, +including, without limitation, the warranties of merchantability and of +fitness for any purpose. The Contributing Authors and Group 42, Inc. +assume no liability for direct, indirect, incidental, special, exemplary, +or consequential damages, which may result from the use of the PNG +Reference Library, even if advised of the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + +1. The origin of this source code must not be misrepresented. + +2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + +3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, without +fee, and encourage the use of this source code as a component to +supporting the PNG file format in commercial products. If you use this +source code in a product, acknowledgment is not required but would be +appreciated. + + +A "png_get_copyright" function is available, for convenient use in "about" +boxes and the like: + + printf("%s",png_get_copyright(NULL)); + +Also, the PNG logo (in PNG format, of course) is supplied in the +files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + +Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a +certification mark of the Open Source Initiative. + +Glenn Randers-Pehrson +glennrp at users.sourceforge.net +December 3, 2009 diff --git a/multitech/licenses/MIT b/multitech/licenses/MIT new file mode 100644 index 0000000..61f8dd0 --- /dev/null +++ b/multitech/licenses/MIT @@ -0,0 +1,23 @@ +Copyright (c) 2006 BBC and Fluendo + +Unless otherwise indicated, Source Code is licensed under MIT license. +See further explanation attached in License Statement (distributed in the file +LICENSE). + +Permission is hereby granted, free of charge, to any person obtaining a copy of +this software and associated documentation files (the "Software"), to deal in +the Software without restriction, including without limitation the rights to +use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies +of the Software, and to permit persons to whom the Software is furnished to do +so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/multitech/licenses/MIT-X11 License b/multitech/licenses/MIT-X11 License new file mode 100644 index 0000000..7c66d06 --- /dev/null +++ b/multitech/licenses/MIT-X11 License @@ -0,0 +1,32 @@ +Copyright (C) 2007-2008 David Zeuthen <davidz@redhat.com>. +All Rights Reserved. + +The PolicyKit source code is licensed under the MIT/X11 license. The +license is included below. + +-- BEGIN MIT/X11 License --- + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated +documentation files (the "Software"), to deal in the +Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, +sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall +be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE +WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR +PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS +BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +-- END MIT/X11 License --- + diff --git a/multitech/licenses/MOZILLA PUBLIC LICENSE b/multitech/licenses/MOZILLA PUBLIC LICENSE new file mode 100644 index 0000000..8e6bb3e --- /dev/null +++ b/multitech/licenses/MOZILLA PUBLIC LICENSE @@ -0,0 +1,470 @@ + MOZILLA PUBLIC LICENSE + Version 1.1 + + --------------- + +1. Definitions. + + 1.0.1. "Commercial Use" means distribution or otherwise making the + Covered Code available to a third party. + + 1.1. "Contributor" means each entity that creates or contributes to + the creation of Modifications. + + 1.2. "Contributor Version" means the combination of the Original + Code, prior Modifications used by a Contributor, and the Modifications + made by that particular Contributor. + + 1.3. "Covered Code" means the Original Code or Modifications or the + combination of the Original Code and Modifications, in each case + including portions thereof. + + 1.4. "Electronic Distribution Mechanism" means a mechanism generally + accepted in the software development community for the electronic + transfer of data. + + 1.5. "Executable" means Covered Code in any form other than Source + Code. + + 1.6. "Initial Developer" means the individual or entity identified + as the Initial Developer in the Source Code notice required by Exhibit + A. + + 1.7. "Larger Work" means a work which combines Covered Code or + portions thereof with code not governed by the terms of this License. + + 1.8. "License" means this document. + + 1.8.1. "Licensable" means having the right to grant, to the maximum + extent possible, whether at the time of the initial grant or + subsequently acquired, any and all of the rights conveyed herein. + + 1.9. "Modifications" means any addition to or deletion from the + substance or structure of either the Original Code or any previous + Modifications. When Covered Code is released as a series of files, a + Modification is: + A. Any addition to or deletion from the contents of a file + containing Original Code or previous Modifications. + + B. Any new file that contains any part of the Original Code or + previous Modifications. + + 1.10. "Original Code" means Source Code of computer software code + which is described in the Source Code notice required by Exhibit A as + Original Code, and which, at the time of its release under this + License is not already Covered Code governed by this License. + + 1.10.1. "Patent Claims" means any patent claim(s), now owned or + hereafter acquired, including without limitation, method, process, + and apparatus claims, in any patent Licensable by grantor. + + 1.11. "Source Code" means the preferred form of the Covered Code for + making modifications to it, including all modules it contains, plus + any associated interface definition files, scripts used to control + compilation and installation of an Executable, or source code + differential comparisons against either the Original Code or another + well known, available Covered Code of the Contributor's choice. The + Source Code can be in a compressed or archival form, provided the + appropriate decompression or de-archiving software is widely available + for no charge. + + 1.12. "You" (or "Your") means an individual or a legal entity + exercising rights under, and complying with all of the terms of, this + License or a future version of this License issued under Section 6.1. + For legal entities, "You" includes any entity which controls, is + controlled by, or is under common control with You. For purposes of + this definition, "control" means (a) the power, direct or indirect, + to cause the direction or management of such entity, whether by + contract or otherwise, or (b) ownership of more than fifty percent + (50%) of the outstanding shares or beneficial ownership of such + entity. + +2. Source Code License. + + 2.1. The Initial Developer Grant. + The Initial Developer hereby grants You a world-wide, royalty-free, + non-exclusive license, subject to third party intellectual property + claims: + (a) under intellectual property rights (other than patent or + trademark) Licensable by Initial Developer to use, reproduce, + modify, display, perform, sublicense and distribute the Original + Code (or portions thereof) with or without Modifications, and/or + as part of a Larger Work; and + + (b) under Patents Claims infringed by the making, using or + selling of Original Code, to make, have made, use, practice, + sell, and offer for sale, and/or otherwise dispose of the + Original Code (or portions thereof). + + (c) the licenses granted in this Section 2.1(a) and (b) are + effective on the date Initial Developer first distributes + Original Code under the terms of this License. + + (d) Notwithstanding Section 2.1(b) above, no patent license is + granted: 1) for code that You delete from the Original Code; 2) + separate from the Original Code; or 3) for infringements caused + by: i) the modification of the Original Code or ii) the + combination of the Original Code with other software or devices. + + 2.2. Contributor Grant. + Subject to third party intellectual property claims, each Contributor + hereby grants You a world-wide, royalty-free, non-exclusive license + + (a) under intellectual property rights (other than patent or + trademark) Licensable by Contributor, to use, reproduce, modify, + display, perform, sublicense and distribute the Modifications + created by such Contributor (or portions thereof) either on an + unmodified basis, with other Modifications, as Covered Code + and/or as part of a Larger Work; and + + (b) under Patent Claims infringed by the making, using, or + selling of Modifications made by that Contributor either alone + and/or in combination with its Contributor Version (or portions + of such combination), to make, use, sell, offer for sale, have + made, and/or otherwise dispose of: 1) Modifications made by that + Contributor (or portions thereof); and 2) the combination of + Modifications made by that Contributor with its Contributor + Version (or portions of such combination). + + (c) the licenses granted in Sections 2.2(a) and 2.2(b) are + effective on the date Contributor first makes Commercial Use of + the Covered Code. + + (d) Notwithstanding Section 2.2(b) above, no patent license is + granted: 1) for any code that Contributor has deleted from the + Contributor Version; 2) separate from the Contributor Version; + 3) for infringements caused by: i) third party modifications of + Contributor Version or ii) the combination of Modifications made + by that Contributor with other software (except as part of the + Contributor Version) or other devices; or 4) under Patent Claims + infringed by Covered Code in the absence of Modifications made by + that Contributor. + +3. Distribution Obligations. + + 3.1. Application of License. + The Modifications which You create or to which You contribute are + governed by the terms of this License, including without limitation + Section 2.2. The Source Code version of Covered Code may be + distributed only under the terms of this License or a future version + of this License released under Section 6.1, and You must include a + copy of this License with every copy of the Source Code You + distribute. You may not offer or impose any terms on any Source Code + version that alters or restricts the applicable version of this + License or the recipients' rights hereunder. However, You may include + an additional document offering the additional rights described in + Section 3.5. + + 3.2. Availability of Source Code. + Any Modification which You create or to which You contribute must be + made available in Source Code form under the terms of this License + either on the same media as an Executable version or via an accepted + Electronic Distribution Mechanism to anyone to whom you made an + Executable version available; and if made available via Electronic + Distribution Mechanism, must remain available for at least twelve (12) + months after the date it initially became available, or at least six + (6) months after a subsequent version of that particular Modification + has been made available to such recipients. You are responsible for + ensuring that the Source Code version remains available even if the + Electronic Distribution Mechanism is maintained by a third party. + + 3.3. Description of Modifications. + You must cause all Covered Code to which You contribute to contain a + file documenting the changes You made to create that Covered Code and + the date of any change. You must include a prominent statement that + the Modification is derived, directly or indirectly, from Original + Code provided by the Initial Developer and including the name of the + Initial Developer in (a) the Source Code, and (b) in any notice in an + Executable version or related documentation in which You describe the + origin or ownership of the Covered Code. + + 3.4. Intellectual Property Matters + (a) Third Party Claims. + If Contributor has knowledge that a license under a third party's + intellectual property rights is required to exercise the rights + granted by such Contributor under Sections 2.1 or 2.2, + Contributor must include a text file with the Source Code + distribution titled "LEGAL" which describes the claim and the + party making the claim in sufficient detail that a recipient will + know whom to contact. If Contributor obtains such knowledge after + the Modification is made available as described in Section 3.2, + Contributor shall promptly modify the LEGAL file in all copies + Contributor makes available thereafter and shall take other steps + (such as notifying appropriate mailing lists or newsgroups) + reasonably calculated to inform those who received the Covered + Code that new knowledge has been obtained. + + (b) Contributor APIs. + If Contributor's Modifications include an application programming + interface and Contributor has knowledge of patent licenses which + are reasonably necessary to implement that API, Contributor must + also include this information in the LEGAL file. + + (c) Representations. + Contributor represents that, except as disclosed pursuant to + Section 3.4(a) above, Contributor believes that Contributor's + Modifications are Contributor's original creation(s) and/or + Contributor has sufficient rights to grant the rights conveyed by + this License. + + 3.5. Required Notices. + You must duplicate the notice in Exhibit A in each file of the Source + Code. If it is not possible to put such notice in a particular Source + Code file due to its structure, then You must include such notice in a + location (such as a relevant directory) where a user would be likely + to look for such a notice. If You created one or more Modification(s) + You may add your name as a Contributor to the notice described in + Exhibit A. You must also duplicate this License in any documentation + for the Source Code where You describe recipients' rights or ownership + rights relating to Covered Code. You may choose to offer, and to + charge a fee for, warranty, support, indemnity or liability + obligations to one or more recipients of Covered Code. However, You + may do so only on Your own behalf, and not on behalf of the Initial + Developer or any Contributor. You must make it absolutely clear than + any such warranty, support, indemnity or liability obligation is + offered by You alone, and You hereby agree to indemnify the Initial + Developer and every Contributor for any liability incurred by the + Initial Developer or such Contributor as a result of warranty, + support, indemnity or liability terms You offer. + + 3.6. Distribution of Executable Versions. + You may distribute Covered Code in Executable form only if the + requirements of Section 3.1-3.5 have been met for that Covered Code, + and if You include a notice stating that the Source Code version of + the Covered Code is available under the terms of this License, + including a description of how and where You have fulfilled the + obligations of Section 3.2. The notice must be conspicuously included + in any notice in an Executable version, related documentation or + collateral in which You describe recipients' rights relating to the + Covered Code. You may distribute the Executable version of Covered + Code or ownership rights under a license of Your choice, which may + contain terms different from this License, provided that You are in + compliance with the terms of this License and that the license for the + Executable version does not attempt to limit or alter the recipient's + rights in the Source Code version from the rights set forth in this + License. If You distribute the Executable version under a different + license You must make it absolutely clear that any terms which differ + from this License are offered by You alone, not by the Initial + Developer or any Contributor. You hereby agree to indemnify the + Initial Developer and every Contributor for any liability incurred by + the Initial Developer or such Contributor as a result of any such + terms You offer. + + 3.7. Larger Works. + You may create a Larger Work by combining Covered Code with other code + not governed by the terms of this License and distribute the Larger + Work as a single product. In such a case, You must make sure the + requirements of this License are fulfilled for the Covered Code. + +4. Inability to Comply Due to Statute or Regulation. + + If it is impossible for You to comply with any of the terms of this + License with respect to some or all of the Covered Code due to + statute, judicial order, or regulation then You must: (a) comply with + the terms of this License to the maximum extent possible; and (b) + describe the limitations and the code they affect. Such description + must be included in the LEGAL file described in Section 3.4 and must + be included with all distributions of the Source Code. Except to the + extent prohibited by statute or regulation, such description must be + sufficiently detailed for a recipient of ordinary skill to be able to + understand it. + +5. Application of this License. + + This License applies to code to which the Initial Developer has + attached the notice in Exhibit A and to related Covered Code. + +6. Versions of the License. + + 6.1. New Versions. + BBC Communications Corporation ("Netscape") may publish revised + and/or new versions of the License from time to time. Each version + will be given a distinguishing version number. + + 6.2. Effect of New Versions. + Once Covered Code has been published under a particular version of the + License, You may always continue to use it under the terms of that + version. You may also choose to use such Covered Code under the terms + of any subsequent version of the License published by BBC. No one + other than BBC has the right to modify the terms applicable to + Covered Code created under this License. + + 6.3. Derivative Works. + If You create or use a modified version of this License (which you may + only do in order to apply it to code which is not already Covered Code + governed by this License), You must (a) rename Your license so that + the phrases "Mozilla", "MOZILLAPL", "MOZPL", "BBC", + "MPL", "NPL" or any confusingly similar phrase do not appear in your + license (except to note that your license differs from this License) + and (b) otherwise make it clear that Your version of the license + contains terms which differ from the Mozilla Public License and + BBC Public License. (Filling in the name of the Initial + Developer, Original Code or Contributor in the notice described in + Exhibit A shall not of themselves be deemed to be modifications of + this License.) + +7. DISCLAIMER OF WARRANTY. + + COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, + WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF + DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. + THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE + IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, + YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE + COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER + OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF + ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. + +8. TERMINATION. + + 8.1. This License and the rights granted hereunder will terminate + automatically if You fail to comply with terms herein and fail to cure + such breach within 30 days of becoming aware of the breach. All + sublicenses to the Covered Code which are properly granted shall + survive any termination of this License. Provisions which, by their + nature, must remain in effect beyond the termination of this License + shall survive. + + 8.2. If You initiate litigation by asserting a patent infringement + claim (excluding declatory judgment actions) against Initial Developer + or a Contributor (the Initial Developer or Contributor against whom + You file such action is referred to as "Participant") alleging that: + + (a) such Participant's Contributor Version directly or indirectly + infringes any patent, then any and all rights granted by such + Participant to You under Sections 2.1 and/or 2.2 of this License + shall, upon 60 days notice from Participant terminate prospectively, + unless if within 60 days after receipt of notice You either: (i) + agree in writing to pay Participant a mutually agreeable reasonable + royalty for Your past and future use of Modifications made by such + Participant, or (ii) withdraw Your litigation claim with respect to + the Contributor Version against such Participant. If within 60 days + of notice, a reasonable royalty and payment arrangement are not + mutually agreed upon in writing by the parties or the litigation claim + is not withdrawn, the rights granted by Participant to You under + Sections 2.1 and/or 2.2 automatically terminate at the expiration of + the 60 day notice period specified above. + + (b) any software, hardware, or device, other than such Participant's + Contributor Version, directly or indirectly infringes any patent, then + any rights granted to You by such Participant under Sections 2.1(b) + and 2.2(b) are revoked effective as of the date You first made, used, + sold, distributed, or had made, Modifications made by that + Participant. + + 8.3. If You assert a patent infringement claim against Participant + alleging that such Participant's Contributor Version directly or + indirectly infringes any patent where such claim is resolved (such as + by license or settlement) prior to the initiation of patent + infringement litigation, then the reasonable value of the licenses + granted by such Participant under Sections 2.1 or 2.2 shall be taken + into account in determining the amount or value of any payment or + license. + + 8.4. In the event of termination under Sections 8.1 or 8.2 above, + all end user license agreements (excluding distributors and resellers) + which have been validly granted by You or any distributor hereunder + prior to termination shall survive termination. + +9. LIMITATION OF LIABILITY. + + UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT + (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL + DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, + OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR + ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY + CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, + WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER + COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN + INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF + LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY + RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW + PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE + EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO + THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. + +10. U.S. GOVERNMENT END USERS. + + The Covered Code is a "commercial item," as that term is defined in + 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer + software" and "commercial computer software documentation," as such + terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 + C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), + all U.S. Government End Users acquire Covered Code with only those + rights set forth herein. + +11. MISCELLANEOUS. + + This License represents the complete agreement concerning subject + matter hereof. If any provision of this License is held to be + unenforceable, such provision shall be reformed only to the extent + necessary to make it enforceable. This License shall be governed by + California law provisions (except to the extent applicable law, if + any, provides otherwise), excluding its conflict-of-law provisions. + With respect to disputes in which at least one party is a citizen of, + or an entity chartered or registered to do business in the United + States of America, any litigation relating to this License shall be + subject to the jurisdiction of the Federal Courts of the Northern + District of California, with venue lying in Santa Clara County, + California, with the losing party responsible for costs, including + without limitation, court costs and reasonable attorneys' fees and + expenses. The application of the United Nations Convention on + Contracts for the International Sale of Goods is expressly excluded. + Any law or regulation which provides that the language of a contract + shall be construed against the drafter shall not apply to this + License. + +12. RESPONSIBILITY FOR CLAIMS. + + As between Initial Developer and the Contributors, each party is + responsible for claims and damages arising, directly or indirectly, + out of its utilization of rights under this License and You agree to + work with Initial Developer and Contributors to distribute such + responsibility on an equitable basis. Nothing herein is intended or + shall be deemed to constitute any admission of liability. + +13. MULTIPLE-LICENSED CODE. + + Initial Developer may designate portions of the Covered Code as + "Multiple-Licensed". "Multiple-Licensed" means that the Initial + Developer permits you to utilize portions of the Covered Code under + Your choice of the GPL, LGPL, MIT or the alternative licenses, if + any, specified by the Initial Developer in the file described in + Exhibit A. + +EXHIBIT A -Mozilla Public License. + + ``The contents of this file are subject to the Mozilla Public License + Version 1.1 (the "License"); you may not use this file except in + compliance with the License. You may obtain a copy of the License at + http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the + License for the specific language governing rights and limitations + under the License. + + The Original Code is ______________________________________. + + The Initial Developer of the Original Code is ________________________. + Portions created by ______________________ are Copyright (C) ______ + _______________________. All Rights Reserved. + + Contributor(s): ______________________________________. + + Alternatively, the contents of this file may be used under the terms + of the _____ license (the "[___] License"), in which case the + provisions of [______] License are applicable instead of those + above. If you wish to allow use of your version of this file only + under the terms of the [____] License and not to allow others to use + your version of this file under the MPL, indicate your decision by + deleting the provisions above and replace them with the notice and + other provisions required by the [___] License. If you do not delete + the provisions above, a recipient may use your version of this file + under either the MPL or the [___] License." + + [NOTE: The text of this Exhibit A may differ slightly from the text of + the notices in the Source Code files of the Original Code. You should + use the text of this Exhibit A rather than the text found in the + Original Code Source Code for Your Modifications.] diff --git a/multitech/licenses/Matt Johnston b/multitech/licenses/Matt Johnston new file mode 100644 index 0000000..ec93fa1 --- /dev/null +++ b/multitech/licenses/Matt Johnston @@ -0,0 +1,89 @@ +Dropbear contains a number of components from different sources, hence there +are a few licenses and authors involved. All licenses are fairly +non-restrictive. + + +The majority of code is written by Matt Johnston, under the license below. + +Portions of the client-mode work are (c) 2004 Mihnea Stoenescu, under the +same license: + +Copyright (c) 2002-2006 Matt Johnston +Portions copyright (c) 2004 Mihnea Stoenescu +All rights reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. + +===== + +LibTomCrypt and LibTomMath are written by Tom St Denis, and are Public Domain. + +===== + +sshpty.c is taken from OpenSSH 3.5p1, + Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland + All rights reserved + "As far as I am concerned, the code I have written for this software + can be used freely for any purpose. Any derived versions of this + software must be clearly marked as such, and if the derived work is + incompatible with the protocol description in the RFC file, it must be + called by a name other than "ssh" or "Secure Shell". " + +===== + +loginrec.c +loginrec.h +atomicio.h +atomicio.c +and strlcat() (included in util.c) are from OpenSSH 3.6.1p2, and are licensed +under the 2 point BSD license. + +loginrec is written primarily by Andre Lucas, atomicio.c by Theo de Raadt. + +strlcat() is (c) Todd C. Miller + +===== + +Import code in keyimport.c is modified from PuTTY's import.c, licensed as +follows: + +PuTTY is copyright 1997-2003 Simon Tatham. + +Portions copyright Robert de Bath, Joris van Rantwijk, Delian +Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, +Justin Bradford, and CORE SDI S.A. + +Permission is hereby granted, free of charge, to any person +obtaining a copy of this software and associated documentation files +(the "Software"), to deal in the Software without restriction, +including without limitation the rights to use, copy, modify, merge, +publish, distribute, sublicense, and/or sell copies of the Software, +and to permit persons to whom the Software is furnished to do so, +subject to the following conditions: + +The above copyright notice and this permission notice shall be +included in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE +FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF +CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. diff --git a/multitech/licenses/OpenLDAP Public License.html b/multitech/licenses/OpenLDAP Public License.html new file mode 100644 index 0000000..77e0cdd --- /dev/null +++ b/multitech/licenses/OpenLDAP Public License.html @@ -0,0 +1,114 @@ +<html><head> +<meta http-equiv="content-type" content="text/html; charset=ISO-8859-1"><!-- + Copyright (c) 2010, OpenLDAP Foundation, All Rights Reserved. + Author: & Zeilenga (kurt@cantor.openldap.org) + Modified: 2000-08-23 12:44:27. + Generated from ``license.wml'' via WML 2.0.12 (16-Apr-2008). + by & Zeilenga (kurt@cantor.openldap.org) + on 2010-04-24 21:05:38. + + DO NOT EDIT THIS FILE DIRECTLY! INSTEAD EDIT ``license.wml''. +--> +<!-- + name: Public License for 2.4.22 + id: + $OpenLDAP: www/pages/software/release/license.wml,v 1.6 2000/08/23 19:44:27 kurt Exp $ + site: OpenLDAP + area: software Software + subarea: main Release + page: license (logo) (on) + select: main +--> + + +<title>OpenLDAP, Public License for 2.4.22</title> +<meta name="Copyright" content="Copyright 2010, OpenLDAP Foundation, All Rights Reserved."> +<meta name="Author" content="& Zeilenga, kurt@cantor.openldap.org"> +<meta name="Generator" content="WML 2.0.12 (16-Apr-2008)"> +<meta name="Modified" content="2000-08-23 12:44:27"> +<script type="text/javascript" language="JavaScript"> +<!-- Hiding the code + + // don't frame me + if(window.location != window.parent.location) { + window.parent.location = window.location; + } + +// done hiding --> +</script> +<meta name="swish-keywords" content="OpenLDAP Public License, Public License, License, Copying, Terms, Copyright, Legal"> +<meta name="keywords" content="OpenLDAP, Open, LDAP, X.500, Directory, Open Source, OpenSource, Source, OpenLDAP Public License, Public License, License, Copying, Terms, Copyright, Legal"> +<meta name="description" content="The OpenLDAP Public License details the terms of redistribution and use of OpenLDAP software."> +</head><body link="#0000ff" text="#000000" vlink="#800080" alink="#ff0000" bgcolor="#ffffff"> + <h1> + <a alt="OpenLDAP" href="http://www.openldap.org/"><img src="OpenLDAP-LICENSE_files/LDAPlogo.gif" alt="" border="0"></a> + Public License for 2.4.22</h1> + + +<font face="Arial,Verdana,Helvetica"> +<!-- BEGIN OF ACTUAL PAGE CONTENTS --> + +</font><blockquote><table summary="" border="1"><tbody><tr><td> +<pre>The OpenLDAP Public License + Version 2.8, 17 August 2003 + +Redistribution and use of this software and associated documentation +("Software"), with or without modification, are permitted provided +that the following conditions are met: + +1. Redistributions in source form must retain copyright statements + and notices, + +2. Redistributions in binary form must reproduce applicable copyright + statements and notices, this list of conditions, and the following + disclaimer in the documentation and/or other materials provided + with the distribution, and + +3. Redistributions must contain a verbatim copy of this document. + +The OpenLDAP Foundation may revise this license from time to time. +Each revision is distinguished by a version number. You may use +this Software under terms of this license revision or under the +terms of any subsequent revision of the license. + +THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS +CONTRIBUTORS ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY +AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT +SHALL THE OPENLDAP FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S) +OR OWNER(S) OF THE SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +The names of the authors and copyright holders must not be used in +advertising or otherwise to promote the sale, use or other dealing +in this Software without specific, written prior permission. Title +to copyright in this Software shall at all times remain with copyright +holders. + +OpenLDAP is a registered trademark of the OpenLDAP Foundation. + +Copyright 1999-2003 The OpenLDAP Foundation, Redwood City, +California, USA. All Rights Reserved. Permission to copy and +distribute verbatim copies of this document is granted. +</pre></td></tr></tbody></table> +</blockquote> + +<!-- END OF ACTUAL PAGE CONTENTS --> +<font face="Arial,Verdana,Helvetica"></font> + + +<p> +<font face="Arial,Verdana,Helvetica" size="1" color="#808080"><b> +________________<br> +<small>© Copyright 2010, <a href="http://www.openldap.org/foundation/">OpenLDAP Foundation</a>, <a href="mailto:info@OpenLDAP.org">info@OpenLDAP.org</a></small> +<br> + $OpenLDAP: www/pages/software/release/license.wml,v 1.6 2000/08/23 19:44:27 kurt Exp $ +</b></font> + +</p></body></html>
\ No newline at end of file diff --git a/multitech/licenses/OpenSSL License b/multitech/licenses/OpenSSL License new file mode 100644 index 0000000..a2c4adc --- /dev/null +++ b/multitech/licenses/OpenSSL License @@ -0,0 +1,127 @@ + + LICENSE ISSUES + ============== + + The OpenSSL toolkit stays under a dual license, i.e. both the conditions of + the OpenSSL License and the original SSLeay license apply to the toolkit. + See below for the actual license texts. Actually both licenses are BSD-style + Open Source licenses. In case of any license issues related to OpenSSL + please contact openssl-core@openssl.org. + + OpenSSL License + --------------- + +/* ==================================================================== + * Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. All advertising materials mentioning features or use of this + * software must display the following acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" + * + * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For written permission, please contact + * openssl-core@openssl.org. + * + * 5. Products derived from this software may not be called "OpenSSL" + * nor may "OpenSSL" appear in their names without prior written + * permission of the OpenSSL Project. + * + * 6. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit (http://www.openssl.org/)" + * + * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY + * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * ==================================================================== + * + * This product includes cryptographic software written by Eric Young + * (eay@cryptsoft.com). This product includes software written by Tim + * Hudson (tjh@cryptsoft.com). + * + */ + + Original SSLeay License + ----------------------- + +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + diff --git a/multitech/licenses/PYTHON SOFTWARE FOUNDATION LICENSE VER 2 b/multitech/licenses/PYTHON SOFTWARE FOUNDATION LICENSE VER 2 new file mode 100644 index 0000000..3d41e75 --- /dev/null +++ b/multitech/licenses/PYTHON SOFTWARE FOUNDATION LICENSE VER 2 @@ -0,0 +1,272 @@ +A. HISTORY OF THE SOFTWARE +========================== + +Python was created in the early 1990s by Guido van Rossum at Stichting +Mathematisch Centrum (CWI, see http://www.cwi.nl) in the Netherlands +as a successor of a language called ABC. Guido remains Python's +principal author, although it includes many contributions from others. + +In 1995, Guido continued his work on Python at the Corporation for +National Research Initiatives (CNRI, see http://www.cnri.reston.va.us) +in Reston, Virginia where he released several versions of the +software. + +In May 2000, Guido and the Python core development team moved to +BeOpen.com to form the BeOpen PythonLabs team. In October of the same +year, the PythonLabs team moved to Digital Creations (now Zope +Corporation, see http://www.zope.com). In 2001, the Python Software +Foundation (PSF, see http://www.python.org/psf/) was formed, a +non-profit organization created specifically to own Python-related +Intellectual Property. Zope Corporation is a sponsoring member of +the PSF. + +All Python releases are Open Source (see http://www.opensource.org for +the Open Source Definition). Historically, most, but not all, Python +releases have also been GPL-compatible; the table below summarizes +the various releases. + + Release Derived Year Owner GPL- + from compatible? (1) + + 0.9.0 thru 1.2 1991-1995 CWI yes + 1.3 thru 1.5.2 1.2 1995-1999 CNRI yes + 1.6 1.5.2 2000 CNRI no + 2.0 1.6 2000 BeOpen.com no + 1.6.1 1.6 2001 CNRI yes (2) + 2.1 2.0+1.6.1 2001 PSF no + 2.0.1 2.0+1.6.1 2001 PSF yes + 2.1.1 2.1+2.0.1 2001 PSF yes + 2.2 2.1.1 2001 PSF yes + 2.1.2 2.1.1 2002 PSF yes + 2.1.3 2.1.2 2002 PSF yes + 2.2.1 2.2 2002 PSF yes + 2.2.2 2.2.1 2002 PSF yes + 2.2.3 2.2.2 2003 PSF yes + 2.3 2.2.2 2002-2003 PSF yes + 2.3.1 2.3 2002-2003 PSF yes + 2.3.2 2.3.1 2002-2003 PSF yes + 2.3.3 2.3.2 2002-2003 PSF yes + 2.3.4 2.3.3 2004 PSF yes + 2.3.5 2.3.4 2005 PSF yes + 2.4 2.3 2004 PSF yes + 2.4.1 2.4 2005 PSF yes + 2.4.2 2.4.1 2005 PSF yes + 2.4.3 2.4.2 2006 PSF yes + 2.4.4 2.4.3 2006 PSF yes + 2.5 2.4 2006 PSF yes + 2.5.1 2.5 2007 PSF yes + 2.6 2.5 2008 PSF yes + +Footnotes: + +(1) GPL-compatible doesn't mean that we're distributing Python under + the GPL. All Python licenses, unlike the GPL, let you distribute + a modified version without making your changes open source. The + GPL-compatible licenses make it possible to combine Python with + other software that is released under the GPL; the others don't. + +(2) According to Richard Stallman, 1.6.1 is not GPL-compatible, + because its license has a choice of law clause. According to + CNRI, however, Stallman's lawyer has told CNRI's lawyer that 1.6.1 + is "not incompatible" with the GPL. + +Thanks to the many outside volunteers who have worked under Guido's +direction to make these releases possible. + + +B. TERMS AND CONDITIONS FOR ACCESSING OR OTHERWISE USING PYTHON +=============================================================== + +PYTHON SOFTWARE FOUNDATION LICENSE VERSION 2 +-------------------------------------------- + +1. This LICENSE AGREEMENT is between the Python Software Foundation +("PSF"), and the Individual or Organization ("Licensee") accessing and +otherwise using this software ("Python") in source or binary form and +its associated documentation. + +2. Subject to the terms and conditions of this License Agreement, PSF +hereby grants Licensee a nonexclusive, royalty-free, world-wide +license to reproduce, analyze, test, perform and/or display publicly, +prepare derivative works, distribute, and otherwise use Python +alone or in any derivative version, provided, however, that PSF's +License Agreement and PSF's notice of copyright, i.e., "Copyright (c) +2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Python Software Foundation; +All Rights Reserved" are retained in Python alone or in any derivative +version prepared by Licensee. + +3. In the event Licensee prepares a derivative work that is based on +or incorporates Python or any part thereof, and wants to make +the derivative work available to others as provided herein, then +Licensee hereby agrees to include in any such work a brief summary of +the changes made to Python. + +4. PSF is making Python available to Licensee on an "AS IS" +basis. PSF MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR +IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, PSF MAKES NO AND +DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS +FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON WILL NOT +INFRINGE ANY THIRD PARTY RIGHTS. + +5. PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON +FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS +A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON, +OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. + +6. This License Agreement will automatically terminate upon a material +breach of its terms and conditions. + +7. Nothing in this License Agreement shall be deemed to create any +relationship of agency, partnership, or joint venture between PSF and +Licensee. This License Agreement does not grant permission to use PSF +trademarks or trade name in a trademark sense to endorse or promote +products or services of Licensee, or any third party. + +8. By copying, installing or otherwise using Python, Licensee +agrees to be bound by the terms and conditions of this License +Agreement. + + +BEOPEN.COM LICENSE AGREEMENT FOR PYTHON 2.0 +------------------------------------------- + +BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1 + +1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an +office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the +Individual or Organization ("Licensee") accessing and otherwise using +this software in source or binary form and its associated +documentation ("the Software"). + +2. Subject to the terms and conditions of this BeOpen Python License +Agreement, BeOpen hereby grants Licensee a non-exclusive, +royalty-free, world-wide license to reproduce, analyze, test, perform +and/or display publicly, prepare derivative works, distribute, and +otherwise use the Software alone or in any derivative version, +provided, however, that the BeOpen Python License is retained in the +Software, alone or in any derivative version prepared by Licensee. + +3. BeOpen is making the Software available to Licensee on an "AS IS" +basis. BEOPEN MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR +IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, BEOPEN MAKES NO AND +DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS +FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF THE SOFTWARE WILL NOT +INFRINGE ANY THIRD PARTY RIGHTS. + +4. BEOPEN SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF THE +SOFTWARE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS +AS A RESULT OF USING, MODIFYING OR DISTRIBUTING THE SOFTWARE, OR ANY +DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. + +5. This License Agreement will automatically terminate upon a material +breach of its terms and conditions. + +6. This License Agreement shall be governed by and interpreted in all +respects by the law of the State of California, excluding conflict of +law provisions. Nothing in this License Agreement shall be deemed to +create any relationship of agency, partnership, or joint venture +between BeOpen and Licensee. This License Agreement does not grant +permission to use BeOpen trademarks or trade names in a trademark +sense to endorse or promote products or services of Licensee, or any +third party. As an exception, the "BeOpen Python" logos available at +http://www.pythonlabs.com/logos.html may be used according to the +permissions granted on that web page. + +7. By copying, installing or otherwise using the software, Licensee +agrees to be bound by the terms and conditions of this License +Agreement. + + +CNRI LICENSE AGREEMENT FOR PYTHON 1.6.1 +--------------------------------------- + +1. This LICENSE AGREEMENT is between the Corporation for National +Research Initiatives, having an office at 1895 Preston White Drive, +Reston, VA 20191 ("CNRI"), and the Individual or Organization +("Licensee") accessing and otherwise using Python 1.6.1 software in +source or binary form and its associated documentation. + +2. Subject to the terms and conditions of this License Agreement, CNRI +hereby grants Licensee a nonexclusive, royalty-free, world-wide +license to reproduce, analyze, test, perform and/or display publicly, +prepare derivative works, distribute, and otherwise use Python 1.6.1 +alone or in any derivative version, provided, however, that CNRI's +License Agreement and CNRI's notice of copyright, i.e., "Copyright (c) +1995-2001 Corporation for National Research Initiatives; All Rights +Reserved" are retained in Python 1.6.1 alone or in any derivative +version prepared by Licensee. Alternately, in lieu of CNRI's License +Agreement, Licensee may substitute the following text (omitting the +quotes): "Python 1.6.1 is made available subject to the terms and +conditions in CNRI's License Agreement. This Agreement together with +Python 1.6.1 may be located on the Internet using the following +unique, persistent identifier (known as a handle): 1895.22/1013. This +Agreement may also be obtained from a proxy server on the Internet +using the following URL: http://hdl.handle.net/1895.22/1013". + +3. In the event Licensee prepares a derivative work that is based on +or incorporates Python 1.6.1 or any part thereof, and wants to make +the derivative work available to others as provided herein, then +Licensee hereby agrees to include in any such work a brief summary of +the changes made to Python 1.6.1. + +4. CNRI is making Python 1.6.1 available to Licensee on an "AS IS" +basis. CNRI MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR +IMPLIED. BY WAY OF EXAMPLE, BUT NOT LIMITATION, CNRI MAKES NO AND +DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS +FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 1.6.1 WILL NOT +INFRINGE ANY THIRD PARTY RIGHTS. + +5. CNRI SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON +1.6.1 FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR LOSS AS +A RESULT OF MODIFYING, DISTRIBUTING, OR OTHERWISE USING PYTHON 1.6.1, +OR ANY DERIVATIVE THEREOF, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. + +6. This License Agreement will automatically terminate upon a material +breach of its terms and conditions. + +7. This License Agreement shall be governed by the federal +intellectual property law of the United States, including without +limitation the federal copyright law, and, to the extent such +U.S. federal law does not apply, by the law of the Commonwealth of +Virginia, excluding Virginia's conflict of law provisions. +Notwithstanding the foregoing, with regard to derivative works based +on Python 1.6.1 that incorporate non-separable material that was +previously distributed under the GNU General Public License (GPL), the +law of the Commonwealth of Virginia shall govern this License +Agreement only as to issues arising under or with respect to +Paragraphs 4, 5, and 7 of this License Agreement. Nothing in this +License Agreement shall be deemed to create any relationship of +agency, partnership, or joint venture between CNRI and Licensee. This +License Agreement does not grant permission to use CNRI trademarks or +trade name in a trademark sense to endorse or promote products or +services of Licensee, or any third party. + +8. By clicking on the "ACCEPT" button where indicated, or by copying, +installing or otherwise using Python 1.6.1, Licensee agrees to be +bound by the terms and conditions of this License Agreement. + + ACCEPT + + +CWI LICENSE AGREEMENT FOR PYTHON 0.9.0 THROUGH 1.2 +-------------------------------------------------- + +Copyright (c) 1991 - 1995, Stichting Mathematisch Centrum Amsterdam, +The Netherlands. All rights reserved. + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Stichting Mathematisch +Centrum or CWI not be used in advertising or publicity pertaining to +distribution of the software without specific, written prior +permission. + +STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL WARRANTIES WITH REGARD TO +THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM BE LIABLE +FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. diff --git a/multitech/licenses/PostgreSQL Global Development Group b/multitech/licenses/PostgreSQL Global Development Group new file mode 100644 index 0000000..a40a8cd --- /dev/null +++ b/multitech/licenses/PostgreSQL Global Development Group @@ -0,0 +1,23 @@ +PostgreSQL Database Management System +(formerly known as Postgres, then as Postgres95) + +Portions Copyright (c) 1996-2005, PostgreSQL Global Development Group + +Portions Copyright (c) 1994, The Regents of the University of California + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose, without fee, and without a written agreement +is hereby granted, provided that the above copyright notice and this +paragraph and the following two paragraphs appear in all copies. + +IN NO EVENT SHALL THE UNIVERSITY OF CALIFORNIA BE LIABLE TO ANY PARTY FOR +DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING +LOST PROFITS, ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS +DOCUMENTATION, EVEN IF THE UNIVERSITY OF CALIFORNIA HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +THE UNIVERSITY OF CALIFORNIA SPECIFICALLY DISCLAIMS ANY WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY +AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS +ON AN "AS IS" BASIS, AND THE UNIVERSITY OF CALIFORNIA HAS NO OBLIGATIONS TO +PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. diff --git a/multitech/licenses/SIL OPEN FONT LICENSE Version 1.0 b/multitech/licenses/SIL OPEN FONT LICENSE Version 1.0 new file mode 100644 index 0000000..69c49ef --- /dev/null +++ b/multitech/licenses/SIL OPEN FONT LICENSE Version 1.0 @@ -0,0 +1,100 @@ +This Font Software is Copyright (c) <dates>, <copyright holder> (<mainURL>).
+All Rights Reserved.
+Copyright (c) <dates>, <additional copyright holder> (<mainURL>).
+
+<Font Name> is a Reserved Font Name for this Font Software.
+<Additional Font Name> is a Reserved Font Name for this Font Software.
+
+This Font Software is licensed under the SIL Open Font License, Version 1.0.
+No modification of the license is permitted, only verbatim copy is allowed.
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.0 - 22 November 2005
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of cooperative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide an open
+framework in which fonts may be shared and improved in partnership with
+others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and sold with any software provided that the font
+names of derivative works are changed. The fonts and derivatives,
+however, cannot be released under any other type of license.
+
+DEFINITIONS
+"Font Software" refers to any and all of the following:
+ - font files
+ - data files
+ - source code
+ - build scripts
+ - documentation
+
+"Reserved Font Name" refers to the Font Software name as seen by
+users and any other names as specified after the copyright statement.
+
+"Standard Version" refers to the collection of Font Software
+components as distributed by the Copyright Holder.
+
+"Modified Version" refers to any derivative font software made by
+adding to, deleting, or substituting -- in part or in whole --
+any of the components of the Standard Version, by changing formats
+or by porting the Font Software to a new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Standard or Modified Versions, may be sold by itself.
+
+2) Standard or Modified Versions of the Font Software may be bundled,
+redistributed and sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s), in part or in whole, unless explicit written permission is
+granted by the Copyright Holder. This restriction applies to all
+references stored in the Font Software, such as the font menu name and
+other font description fields, which are used to differentiate the
+font from others.
+
+4) The name(s) of the Copyright Holder or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed using this license, and may not be distributed
+under any other license.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.
diff --git a/multitech/licenses/SIL OPEN FONT LICENSE Version 1.1 b/multitech/licenses/SIL OPEN FONT LICENSE Version 1.1 new file mode 100644 index 0000000..f1a20ac --- /dev/null +++ b/multitech/licenses/SIL OPEN FONT LICENSE Version 1.1 @@ -0,0 +1,97 @@ +Copyright (c) <dates>, <Copyright Holder> (<URL|email>),
+with Reserved Font Name <Reserved Font Name>.
+Copyright (c) <dates>, <additional Copyright Holder> (<URL|email>),
+with Reserved Font Name <additional Reserved Font Name>.
+Copyright (c) <dates>, <additional Copyright Holder> (<URL|email>).
+
+This Font Software is licensed under the SIL Open Font License, Version 1.1.
+This license is copied below, and is also available with a FAQ at:
+http://scripts.sil.org/OFL
+
+
+-----------------------------------------------------------
+SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
+-----------------------------------------------------------
+
+PREAMBLE
+The goals of the Open Font License (OFL) are to stimulate worldwide
+development of collaborative font projects, to support the font creation
+efforts of academic and linguistic communities, and to provide a free and
+open framework in which fonts may be shared and improved in partnership
+with others.
+
+The OFL allows the licensed fonts to be used, studied, modified and
+redistributed freely as long as they are not sold by themselves. The
+fonts, including any derivative works, can be bundled, embedded,
+redistributed and/or sold with any software provided that any reserved
+names are not used by derivative works. The fonts and derivatives,
+however, cannot be released under any other type of license. The
+requirement for fonts to remain under this license does not apply
+to any document created using the fonts or their derivatives.
+
+DEFINITIONS
+"Font Software" refers to the set of files released by the Copyright
+Holder(s) under this license and clearly marked as such. This may
+include source files, build scripts and documentation.
+
+"Reserved Font Name" refers to any names specified as such after the
+copyright statement(s).
+
+"Original Version" refers to the collection of Font Software components as
+distributed by the Copyright Holder(s).
+
+"Modified Version" refers to any derivative made by adding to, deleting,
+or substituting -- in part or in whole -- any of the components of the
+Original Version, by changing formats or by porting the Font Software to a
+new environment.
+
+"Author" refers to any designer, engineer, programmer, technical
+writer or other person who contributed to the Font Software.
+
+PERMISSION & CONDITIONS
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of the Font Software, to use, study, copy, merge, embed, modify,
+redistribute, and sell modified and unmodified copies of the Font
+Software, subject to the following conditions:
+
+1) Neither the Font Software nor any of its individual components,
+in Original or Modified Versions, may be sold by itself.
+
+2) Original or Modified Versions of the Font Software may be bundled,
+redistributed and/or sold with any software, provided that each copy
+contains the above copyright notice and this license. These can be
+included either as stand-alone text files, human-readable headers or
+in the appropriate machine-readable metadata fields within text or
+binary files as long as those fields can be easily viewed by the user.
+
+3) No Modified Version of the Font Software may use the Reserved Font
+Name(s) unless explicit written permission is granted by the corresponding
+Copyright Holder. This restriction only applies to the primary font name as
+presented to the users.
+
+4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
+Software shall not be used to promote, endorse or advertise any
+Modified Version, except to acknowledge the contribution(s) of the
+Copyright Holder(s) and the Author(s) or with their explicit written
+permission.
+
+5) The Font Software, modified or unmodified, in part or in whole,
+must be distributed entirely under this license, and must not be
+distributed under any other license. The requirement for fonts to
+remain under this license does not apply to any document created
+using the Font Software.
+
+TERMINATION
+This license becomes null and void if any of the above conditions are
+not met.
+
+DISCLAIMER
+THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
+COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
+DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
+OTHER DEALINGS IN THE FONT SOFTWARE.
diff --git a/multitech/licenses/SleepyCat Software b/multitech/licenses/SleepyCat Software new file mode 100644 index 0000000..8cb10e7 --- /dev/null +++ b/multitech/licenses/SleepyCat Software @@ -0,0 +1,102 @@ +/*- + * $Id: LICENSE,v 11.12 2004/03/30 20:49:44 bostic Exp $ + */ + +The following is the license that applies to this copy of the Berkeley DB +software. For a license to use the Berkeley DB software under conditions +other than those described here, or to purchase support for this software, +please contact Sleepycat Software by email at info@sleepycat.com, or on +the Web at http://www.sleepycat.com. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= +/* + * Copyright (c) 1990-2004 + * Sleepycat Software. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Redistributions in any form must be accompanied by information on + * how to obtain complete source code for the DB software and any + * accompanying software that uses the DB software. The source code + * must either be included in the distribution or be available for no + * more than the cost of distribution plus a nominal fee, and must be + * freely redistributable under reasonable conditions. For an + * executable file, complete source code means the source code for all + * modules it contains. It does not include source code for modules or + * files that typically accompany the major components of the operating + * system on which the executable file runs. + * + * THIS SOFTWARE IS PROVIDED BY SLEEPYCAT SOFTWARE ``AS IS'' AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT, ARE DISCLAIMED. IN NO EVENT SHALL SLEEPYCAT SOFTWARE + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ +/* + * Copyright (c) 1990, 1993, 1994, 1995 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ +/* + * Copyright (c) 1995, 1996 + * The President and Fellows of Harvard University. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY HARVARD AND ITS CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL HARVARD OR ITS CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ diff --git a/multitech/licenses/Speex License b/multitech/licenses/Speex License new file mode 100644 index 0000000..de6fbe2 --- /dev/null +++ b/multitech/licenses/Speex License @@ -0,0 +1,35 @@ +Copyright 2002-2008 Xiph.org Foundation +Copyright 2002-2008 Jean-Marc Valin +Copyright 2005-2007 Analog Devices Inc. +Copyright 2005-2008 Commonwealth Scientific and Industrial Research + Organisation (CSIRO) +Copyright 1993, 2002, 2006 David Rowe +Copyright 2003 EpicGames +Copyright 1992-1994 Jutta Degener, Carsten Bormann + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +- Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + +- Redistributions in binary form must reproduce the above copyright +notice, this list of conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution. + +- Neither the name of the Xiph.org Foundation nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/multitech/licenses/Thai Open Source Software Center b/multitech/licenses/Thai Open Source Software Center new file mode 100644 index 0000000..dcb4506 --- /dev/null +++ b/multitech/licenses/Thai Open Source Software Center @@ -0,0 +1,22 @@ +Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd + and Clark Cooper +Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +"Software"), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be included +in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY +CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. diff --git a/multitech/licenses/The Academic Free License b/multitech/licenses/The Academic Free License new file mode 100644 index 0000000..a91ca1d --- /dev/null +++ b/multitech/licenses/The Academic Free License @@ -0,0 +1,551 @@ +D-Bus is licensed to you under your choice of the Academic Free +License version 2.1, or the GNU General Public License version 2. +Both licenses are included here. Some of the standalone binaries are +under the GPL only; in particular, but not limited to, +tools/dbus-cleanup-sockets.c and test/decode-gcov.c. Each source code +file is marked with the proper copyright information - if you find a +file that isn't marked please bring it to our attention. + + +The Academic Free License +v. 2.1 + +This Academic Free License (the "License") applies to any original work of authorship (the "Original Work") whose owner (the "Licensor") has placed the following notice immediately following the copyright notice for the Original Work: + +Licensed under the Academic Free License version 2.1 + +1) Grant of Copyright License. Licensor hereby grants You a +world-wide, royalty-free, non-exclusive, perpetual, sublicenseable +license to do the following: + +a) to reproduce the Original Work in copies; + +b) to prepare derivative works ("Derivative Works") based upon the Original Work; + +c) to distribute copies of the Original Work and Derivative Works to the public; + +d) to perform the Original Work publicly; and + +e) to display the Original Work publicly. + +2) Grant of Patent License. Licensor hereby grants You a world-wide, +royalty-free, non-exclusive, perpetual, sublicenseable license, under +patent claims owned or controlled by the Licensor that are embodied in +the Original Work as furnished by the Licensor, to make, use, sell and +offer for sale the Original Work and Derivative Works. + +3) Grant of Source Code License. The term "Source Code" means the +preferred form of the Original Work for making modifications to it and +all available documentation describing how to modify the Original +Work. Licensor hereby agrees to provide a machine-readable copy of the +Source Code of the Original Work along with each copy of the Original +Work that Licensor distributes. Licensor reserves the right to satisfy +this obligation by placing a machine-readable copy of the Source Code +in an information repository reasonably calculated to permit +inexpensive and convenient access by You for as long as Licensor +continues to distribute the Original Work, and by publishing the +address of that information repository in a notice immediately +following the copyright notice that applies to the Original Work. + +4) Exclusions From License Grant. Neither the names of Licensor, nor +the names of any contributors to the Original Work, nor any of their +trademarks or service marks, may be used to endorse or promote +products derived from this Original Work without express prior written +permission of the Licensor. Nothing in this License shall be deemed to +grant any rights to trademarks, copyrights, patents, trade secrets or +any other intellectual property of Licensor except as expressly stated +herein. No patent license is granted to make, use, sell or offer to +sell embodiments of any patent claims other than the licensed claims +defined in Section 2. No right is granted to the trademarks of +Licensor even if such marks are included in the Original Work. Nothing +in this License shall be interpreted to prohibit Licensor from +licensing under different terms from this License any Original Work +that Licensor otherwise would have a right to license. + +5) This section intentionally omitted. + +6) Attribution Rights. You must retain, in the Source Code of any +Derivative Works that You create, all copyright, patent or trademark +notices from the Source Code of the Original Work, as well as any +notices of licensing and any descriptive text identified therein as an +"Attribution Notice." You must cause the Source Code for any +Derivative Works that You create to carry a prominent Attribution +Notice reasonably calculated to inform recipients that You have +modified the Original Work. + +7) Warranty of Provenance and Disclaimer of Warranty. Licensor +warrants that the copyright in and to the Original Work and the patent +rights granted herein by Licensor are owned by the Licensor or are +sublicensed to You under the terms of this License with the permission +of the contributor(s) of those copyrights and patent rights. Except as +expressly stated in the immediately proceeding sentence, the Original +Work is provided under this License on an "AS IS" BASIS and WITHOUT +WARRANTY, either express or implied, including, without limitation, +the warranties of NON-INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A +PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY OF THE ORIGINAL +WORK IS WITH YOU. This DISCLAIMER OF WARRANTY constitutes an essential +part of this License. No license to Original Work is granted hereunder +except under this disclaimer. + +8) Limitation of Liability. Under no circumstances and under no legal +theory, whether in tort (including negligence), contract, or +otherwise, shall the Licensor be liable to any person for any direct, +indirect, special, incidental, or consequential damages of any +character arising as a result of this License or the use of the +Original Work including, without limitation, damages for loss of +goodwill, work stoppage, computer failure or malfunction, or any and +all other commercial damages or losses. This limitation of liability +shall not apply to liability for death or personal injury resulting +from Licensor's negligence to the extent applicable law prohibits such +limitation. Some jurisdictions do not allow the exclusion or +limitation of incidental or consequential damages, so this exclusion +and limitation may not apply to You. + +9) Acceptance and Termination. If You distribute copies of the +Original Work or a Derivative Work, You must make a reasonable effort +under the circumstances to obtain the express assent of recipients to +the terms of this License. Nothing else but this License (or another +written agreement between Licensor and You) grants You permission to +create Derivative Works based upon the Original Work or to exercise +any of the rights granted in Section 1 herein, and any attempt to do +so except under the terms of this License (or another written +agreement between Licensor and You) is expressly prohibited by +U.S. copyright law, the equivalent laws of other countries, and by +international treaty. Therefore, by exercising any of the rights +granted to You in Section 1 herein, You indicate Your acceptance of +this License and all of its terms and conditions. + +10) Termination for Patent Action. This License shall terminate +automatically and You may no longer exercise any of the rights granted +to You by this License as of the date You commence an action, +including a cross-claim or counterclaim, against Licensor or any +licensee alleging that the Original Work infringes a patent. This +termination provision shall not apply for an action alleging patent +infringement by combinations of the Original Work with other software +or hardware. + +11) Jurisdiction, Venue and Governing Law. Any action or suit relating +to this License may be brought only in the courts of a jurisdiction +wherein the Licensor resides or in which Licensor conducts its primary +business, and under the laws of that jurisdiction excluding its +conflict-of-law provisions. The application of the United Nations +Convention on Contracts for the International Sale of Goods is +expressly excluded. Any use of the Original Work outside the scope of +this License or after its termination shall be subject to the +requirements and penalties of the U.S. Copyright Act, 17 U.S.C. § 101 +et seq., the equivalent laws of other countries, and international +treaty. This section shall survive the termination of this License. + +12) Attorneys Fees. In any action to enforce the terms of this License +or seeking damages relating thereto, the prevailing party shall be +entitled to recover its costs and expenses, including, without +limitation, reasonable attorneys' fees and costs incurred in +connection with such action, including any appeal of such action. This +section shall survive the termination of this License. + +13) Miscellaneous. This License represents the complete agreement +concerning the subject matter hereof. If any provision of this License +is held to be unenforceable, such provision shall be reformed only to +the extent necessary to make it enforceable. + +14) Definition of "You" in This License. "You" throughout this +License, whether in upper or lower case, means an individual or a +legal entity exercising rights under, and complying with all of the +terms of, this License. For legal entities, "You" includes any entity +that controls, is controlled by, or is under common control with +you. For purposes of this definition, "control" means (i) the power, +direct or indirect, to cause the direction or management of such +entity, whether by contract or otherwise, or (ii) ownership of fifty +percent (50%) or more of the outstanding shares, or (iii) beneficial +ownership of such entity. + +15) Right to Use. You may use the Original Work in all ways not +otherwise restricted or conditioned by this License or by law, and +Licensor promises not to interfere with or be responsible for such +uses by You. + +This license is Copyright (C) 2003-2004 Lawrence E. Rosen. All rights +reserved. Permission is hereby granted to copy and distribute this +license without modification. This license may not be modified without +the express written permission of its copyright owner. + + +-- +END OF ACADEMIC FREE LICENSE. The following is intended to describe the essential +differences between the Academic Free License (AFL) version 1.0 and other +open source licenses: + +The Academic Free License is similar to the BSD, MIT, UoI/NCSA and Apache +licenses in many respects but it is intended to solve a few problems with +those licenses. + +* The AFL is written so as to make it clear what software is being +licensed (by the inclusion of a statement following the copyright notice +in the software). This way, the license functions better than a template +license. The BSD, MIT and UoI/NCSA licenses apply to unidentified software. + +* The AFL contains a complete copyright grant to the software. The BSD +and Apache licenses are vague and incomplete in that respect. + +* The AFL contains a complete patent grant to the software. The BSD, MIT, +UoI/NCSA and Apache licenses rely on an implied patent license and contain +no explicit patent grant. + +* The AFL makes it clear that no trademark rights are granted to the +licensor's trademarks. The Apache license contains such a provision, but the +BSD, MIT and UoI/NCSA licenses do not. + +* The AFL includes the warranty by the licensor that it either owns the +copyright or that it is distributing the software under a license. None of +the other licenses contain that warranty. All other warranties are disclaimed, +as is the case for the other licenses. + +* The AFL is itself copyrighted (with the right granted to copy and distribute +without modification). This ensures that the owner of the copyright to the +license will control changes. The Apache license contains a copyright notice, +but the BSD, MIT and UoI/NCSA licenses do not. +-- +START OF GNU GENERAL PUBLIC LICENSE +-- + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/multitech/licenses/The Open Group b/multitech/licenses/The Open Group new file mode 100644 index 0000000..2b3f545 --- /dev/null +++ b/multitech/licenses/The Open Group @@ -0,0 +1,21 @@ +Copyright 1993, 1998 The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation. + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from The Open Group. diff --git a/multitech/licenses/The XFree86 Project License b/multitech/licenses/The XFree86 Project License new file mode 100644 index 0000000..75c246b --- /dev/null +++ b/multitech/licenses/The XFree86 Project License @@ -0,0 +1,852 @@ + Licenses + + The XFree86 Project + + January 2002 + +1. XFree86 License + +XFree86 code without an explicit copyright is covered by the following copy- +right/license: + +Copyright (C) 1994-2002 The XFree86 Project, Inc. All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is fur- +nished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT- +NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON- +NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the XFree86 Project shall not +be used in advertising or otherwise to promote the sale, use or other deal- +ings in this Software without prior written authorization from the XFree86 +Project. + +2. Other Licenses + +Portions of code are covered by the following licenses/copyrights. See indi- +vidual files for the copyright dates. + +2.1 X/MIT Copyrights + +2.1.1 X Consortium + +Copyright (C) <date> X Consortium + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is fur- +nished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT- +NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X +CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of the X Consortium shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from the X Consortium. + +X Window System is a trademark of X Consortium, Inc. + +2.1.2 The Open Group + +Copyright <date> The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that copyright +notice and this permission notice appear in supporting documentation. + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT- +NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN +ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION +WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from The Open Group. + +2.2 Berkeley-based copyrights: + +2.2.1 General + +Redistribution and use in source and binary forms, with or without modifica- +tion, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of the author may not be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MER- +CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPE- +CIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTH- +ERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED +OF THE POSSIBILITY OF SUCH DAMAGE. + +2.2.2 UCB/LBL + +Copyright (c) 1993 The Regents of the University of California. All rights +reserved. + +This software was developed by the Computer Systems Engineering group at +Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and contributed to +Berkeley. + +All advertising materials mentioning features or use of this software must +display the following acknowledgement: This product includes software devel- +oped by the University of California, Lawrence Berkeley Laboratory. + +Redistribution and use in source and binary forms, with or without modifica- +tion, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. All advertising materials mentioning features or use of this software + must display the following acknowledgement: This product includes soft- + ware developed by the University of California, Berkeley and its con- + tributors. + + 4. Neither the name of the University nor the names of its contributors + may be used to endorse or promote products derived from this software + without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY +EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- +CLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +2.3 NVIDIA Corp + +Copyright (c) 1996 NVIDIA, Corp. All rights reserved. + +NOTICE TO USER: The source code is copyrighted under U.S. and international +laws. NVIDIA, Corp. of Sunnyvale, California owns the copyright and as +design patents pending on the design and interface of the NV chips. Users +and possessors of this source code are hereby granted a nonexclusive, roy- +alty-free copyright and design patent license to use this code in individual +and commercial software. + +Any use of this source code must include, in the user documentation and +internal comments to the code, notices to the end user as follows: + +Copyright (c) 1996 NVIDIA, Corp. NVIDIA design patents pending in the U.S. +and foreign countries. + +NVIDIA, CORP. MAKES NO REPRESENTATION ABOUT THE SUITABILITY OF THIS SOURCE +CODE FOR ANY PURPOSE. IT IS PROVIDED "AS IS" WITHOUT EXPRESS OR IMPLIED WAR- +RANTY OF ANY KIND. NVIDIA, CORP. DISCLAIMS ALL WARRANTIES WITH REGARD TO +THIS SOURCE CODE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL NVIDIA, CORP. BE LIABLE +FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR ANY DAM- +AGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOURCE CODE. + +2.4 GLX Public License + +GLX PUBLIC LICENSE (Version 1.0 (2/11/99)) ("License") + +Subject to any third party claims, Silicon Graphics, Inc. ("SGI") hereby +grants permission to Recipient (defined below), under Recipient's copyrights +in the Original Software (defined below), to use, copy, modify, merge, pub- +lish, distribute, sublicense and/or sell copies of Subject Software (defined +below), and to permit persons to whom the Subject Software is furnished in +accordance with this License to do the same, subject to all of the following +terms and conditions, which Recipient accepts by engaging in any such use, +copying, modifying, merging, publishing, distributing, sublicensing or sell- +ing: + +1. Definitions. + + (a) "Original Software" means source code of computer software code + which is described in Exhibit A as Original Software. + + (b) "Modifications" means any addition to or deletion from the sub- + stance or structure of either the Original Software or any previous + Modifications. When Subject Software is released as a series of + files, a Modification means (i) any addition to or deletion from + the contents of a file containing Original Software or previous + Modifications and (ii) any new file that contains any part of the + Original Code or previous Modifications. + + (c) "Subject Software" means the Original Software or Modifications + or the combination of the Original Software and Modifications, or + portions of any of the foregoing. + + (d) "Recipient" means an individual or a legal entity exercising + rights under, and complying with all of the terms of, this License. + For legal entities, "Recipient" includes any entity which controls, + is controlled by, or is under common control with Recipient. For + purposes of this definition, "control" of an entity means (a) the + power, direct or indirect, to direct or manage such entity, or (b) + ownership of fifty percent (50%) or more of the outstanding shares + or beneficial ownership of such entity. + +2. Redistribution of Source Code Subject to These Terms. Redistributions of +Subject Software in source code form must retain the notice set forth in +Exhibit A, below, in every file. A copy of this License must be included in +any documentation for such Subject Software where the recipients' rights +relating to Subject Software are described. Recipient may distribute the +source code version of Subject Software under a license of Recipient's +choice, which may contain terms different from this License, provided that +(i) Recipient is in compliance with the terms of this License, and (ii) the +license terms include this Section 2 and Sections 3, 4, 7, 8, 10, 12 and 13 +of this License, which terms may not be modified or superseded by any other +terms of such license. If Recipient distributes the source code version under +a different license Recipient must make it absolutely clear that any terms +which differ from this License are offered by Recipient alone, not by SGI. +Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as +a result of any such terms Recipient offers. + +3. Redistribution in Executable Form. The notice set forth in Exhibit A must +be conspicuously included in any notice in an executable version of Subject +Software, related documentation or collateral in which Recipient describes +the user's rights relating to the Subject Software. Recipient may distribute +the executable version of Subject Software under a license of Recipient's +choice, which may contain terms different from this License, provided that +(i) Recipient is in compliance with the terms of this License, and (ii) the +license terms include this Section 3 and Sections 4, 7, 8, 10, 12 and 13 of +this License, which terms may not be modified or superseded by any other +terms of such license. If Recipient distributes the executable version under +a different license Recipient must make it absolutely clear that any terms +which differ from this License are offered by Recipient alone, not by SGI. +Recipient hereby agrees to indemnify SGI for any liability incurred by SGI as +a result of any such terms Recipient offers. + +4. Termination. This License and the rights granted hereunder will terminate +automatically if Recipient fails to comply with terms herein and fails to +cure such breach within 30 days of the breach. Any sublicense to the Subject +Software which is properly granted shall survive any termination of this +License absent termination by the terms of such sublicense. Provisions which, +by their nature, must remain in effect beyond the termination of this License +shall survive. + +5. No Trademark Rights. This License does not grant any rights to use any +trade name, trademark or service mark whatsoever. No trade name, trademark or +service mark of SGI may be used to endorse or promote products derived from +the Subject Software without prior written permission of SGI. + +6. No Other Rights. This License does not grant any rights with respect to +the OpenGL API or to any software or hardware implementation thereof or to +any other software whatsoever, nor shall any other rights or licenses not +expressly granted hereunder arise by implication, estoppel or otherwise with +respect to the Subject Software. Title to and ownership of the Original Soft- +ware at all times remains with SGI. All rights in the Original Software not +expressly granted under this License are reserved. + +7. Compliance with Laws; Non-Infringement. Recipient shall comply with all +applicable laws and regulations in connection with use and distribution of +the Subject Software, including but not limited to, all export and import +control laws and regulations of the U.S. government and other countries. +Recipient may not distribute Subject Software that (i) in any way infringes +(directly or contributorily) the rights (including patent, copyright, trade +secret, trademark or other intellectual property rights of any kind) of any +other person or entity or (ii) breaches any representation or warranty, +express, implied or statutory, which under any applicable law it might be +deemed to have been distributed. + +8. Claims of Infringement. If Recipient at any time has knowledge of any one +or more third party claims that reproduction, modification, use, distribu- +tion, import or sale of Subject Software (including particular functionality +or code incorporated in Subject Software) infringes the third party's intel- +lectual property rights, Recipient must place in a well-identified web page +bearing the title "LEGAL" a description of each such claim and a description +of the party making each such claim in sufficient detail that a user of the +Subject Software will know whom to contact regarding the claim. Also, upon +gaining such knowledge of any such claim, Recipient must conspicuously +include the URL for such web page in the Exhibit A notice required under Sec- +tions 2 and 3, above, and in the text of any related documentation, license +agreement or collateral in which Recipient describes end user's rights relat- +ing to the Subject Software. If Recipient obtains such knowledge after it +makes Subject Software available to any other person or entity, Recipient +shall take other steps (such as notifying appropriate mailing lists or news- +groups) reasonably calculated to inform those who received the Subject Soft- +ware that new knowledge has been obtained. + +9. DISCLAIMER OF WARRANTY. SUBJECT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, +WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT +LIMITATION, WARRANTIES THAT THE SUBJECT SOFTWARE IS FREE OF DEFECTS, MER- +CHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON- INFRINGING. SGI ASSUMES NO +RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD ANY SOFTWARE +PROVE DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR ANY SER- +VICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN +ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY SUBJECT SOFTWARE IS AUTHORIZED +HEREUNDER EXCEPT UNDER THIS DISCLAIMER. + +10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THE- +ORY, WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIA- +BILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR +ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY +CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK +STOPPAGE, LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER +COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF +THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY +TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI's NEGLIGENCE TO +THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO +NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, +SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO RECIPIENT. + +11. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this License. +Recipient will defend, indemnify and hold harmless Silicon Graphics, Inc. +from and against any loss, liability, damages, costs or expenses (including +the payment of reasonable attorneys fees) arising out of Recipient's use, +modification, reproduction and distribution of the Subject Software or out of +any representation or warranty made by Recipient. + +12. U.S. Government End Users. The Subject Software is a "commercial item" +consisting of "commercial computer software" as such terms are defined in +title 48 of the Code of Federal Regulations and all U.S. Government End +Users acquire only the rights set forth in this License and are subject to +the terms of this License. + +13. Miscellaneous. This License represents the complete agreement concerning +subject matter hereof. If any provision of this License is held to be unen- +forceable, such provision shall be reformed so as to achieve as nearly as +possible the same economic effect as the original provision and the remainder +of this License will remain in effect. This License shall be governed by and +construed in accordance with the laws of the United States and the State of +California as applied to agreements entered into and to be performed entirely +within California between California residents. Any litigation relating to +this License shall be subject to the exclusive jurisdiction of the Federal +Courts of the Northern District of California (or, absent subject matter +jurisdiction in such courts, the courts of the State of California), with +venue lying exclusively in Santa Clara County, California, with the losing +party responsible for costs, including without limitation, court costs and +reasonable attorneys fees and expenses. The application of the United Nations +Convention on Contracts for the International Sale of Goods is expressly +excluded. Any law or regulation which provides that the language of a con- +tract shall be construed against the drafter shall not apply to this License. + +Exhibit A + +The contents of this file are subject to Sections 2, 3, 4, 7, 8, 10, 12 and +13 of the GLX Public License Version 1.0 (the "License"). You may not use +this file except in compliance with those sections of the License. You may +obtain a copy of the License at Silicon Graphics, Inc., attn: Legal Services, +2011 N. Shoreline Blvd., Mountain View, CA 94043 or at +http://www.sgi.com/software/opensource/glx/license.html. + +Software distributed under the License is distributed on an "AS IS" basis. +ALL WARRANTIES ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED +WARRANTIES OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE OR OF NON- +INFRINGEMENT. See the License for the specific language governing rights and +limitations under the License. + +The Original Software is GLX version 1.2 source code, released February, +1999. The developer of the Original Software is Silicon Graphics, Inc. Those +portions of the Subject Software created by Silicon Graphics, Inc. are Copy- +right (c) 1991-9 Silicon Graphics, Inc. All Rights Reserved. + +2.5 CID Font Code Public License + +CID FONT CODE PUBLIC LICENSE (Version 1.0 (3/31/99))("License") + +Subject to any applicable third party claims, Silicon Graphics, Inc. ("SGI") +hereby grants permission to Recipient (defined below), under SGI's copyrights +in the Original Software (defined below), to use, copy, modify, merge, pub- +lish, distribute, sublicense and/or sell copies of Subject Software (defined +below) in both source code and executable form, and to permit persons to whom +the Subject Software is furnished in accordance with this License to do the +same, subject to all of the following terms and conditions, which Recipient +accepts by engaging in any such use, copying, modifying, merging, publica- +tion, distributing, sublicensing or selling: + +1. Definitions. + + a. "Original Software" means source code of computer software code + that is described in Exhibit A as Original Software. + + b. "Modifications" means any addition to or deletion from the sub- + stance or structure of either the Original Software or any previous + Modifications. When Subject Software is released as a series of + files, a Modification means (i) any addition to or deletion from + the contents of a file containing Original Software or previous + Modifications and (ii) any new file that contains any part of the + Original Code or previous Modifications. + + c. "Subject Software" means the Original Software or Modifications + or the combination of the Original Software and Modifications, or + portions of any of the foregoing. + + d. "Recipient" means an individual or a legal entity exercising + rights under the terms of this License. For legal entities, "Recip- + ient" includes any entity that controls, is controlled by, or is + under common control with Recipient. For purposes of this defini- + tion, "control" of an entity means (i) the power, direct or indi- + rect, to direct or manage such entity, or (ii) ownership of fifty + percent (50%) or more of the outstanding shares or beneficial own- + ership of such entity. + + e. "Required Notice" means the notice set forth in Exhibit A to + this License. + + f. "Accompanying Technology" means any software or other technology + that is not a Modification and that is distributed or made publicly + available by Recipient with the Subject Software. Separate soft- + ware files that do not contain any Original Software or any previ- + ous Modification shall not be deemed a Modification, even if such + software files are aggregated as part of a product, or in any + medium of storage, with any file that does contain Original Soft- + ware or any previous Modification. + +2. License Terms. All distribution of the Subject Software must be made sub- +ject to the terms of this License. A copy of this License and the Required +Notice must be included in any documentation for Subject Software where +Recipient's rights relating to Subject Software and/or any Accompanying Tech- +nology are described. Distributions of Subject Software in source code form +must also include the Required Notice in every file distributed. In addition, +a ReadMe file entitled "Important Legal Notice" must be distributed with each +distribution of one or more files that incorporate Subject Software. That +file must be included with distributions made in both source code and exe- +cutable form. A copy of the License and the Required Notice must be included +in that file. Recipient may distribute Accompanying Technology under a +license of Recipient's choice, which may contain terms different from this +License, provided that (i) Recipient is in compliance with the terms of this +License, (ii) such other license terms do not modify or supersede the terms +of this License as applicable to the Subject Software, (iii) Recipient hereby +indemnifies SGI for any liability incurred by SGI as a result of the distri- +bution of Accompanying Technology or the use of other license terms. + +3. Termination. This License and the rights granted hereunder will terminate +automatically if Recipient fails to comply with terms herein and fails to +cure such breach within 30 days of the breach. Any sublicense to the Subject +Software that is properly granted shall survive any termination of this +License absent termination by the terms of such sublicense. Provisions which, +by their nature, must remain in effect beyond the termination of this License +shall survive. + +4. Trademark Rights. This License does not grant any rights to use any trade +name, trademark or service mark whatsoever. No trade name, trademark or ser- +vice mark of SGI may be used to endorse or promote products derived from or +incorporating any Subject Software without prior written permission of SGI. + +5. No Other Rights. No rights or licenses not expressly granted hereunder +shall arise by implication, estoppel or otherwise. Title to and ownership of +the Original Software at all times remains with SGI. All rights in the Origi- +nal Software not expressly granted under this License are reserved. + +6. Compliance with Laws; Non-Infringement. Recipient shall comply with all +applicable laws and regulations in connection with use and distribution of +the Subject Software, including but not limited to, all export and import +control laws and regulations of the U.S. government and other countries. +Recipient may not distribute Subject Software that (i) in any way infringes +(directly or contributorily) the rights (including patent, copyright, trade +secret, trademark or other intellectual property rights of any kind) of any +other person or entity, or (ii) breaches any representation or warranty, +express, implied or statutory, which under any applicable law it might be +deemed to have been distributed. + +7. Claims of Infringement. If Recipient at any time has knowledge of any one +or more third party claims that reproduction, modification, use, distribu- +tion, import or sale of Subject Software (including particular functionality +or code incorporated in Subject Software) infringes the third party's intel- +lectual property rights, Recipient must place in a well-identified web page +bearing the title "LEGAL" a description of each such claim and a description +of the party making each such claim in sufficient detail that a user of the +Subject Software will know whom to contact regarding the claim. Also, upon +gaining such knowledge of any such claim, Recipient must conspicuously +include the URL for such web page in the Required Notice, and in the text of +any related documentation, license agreement or collateral in which Recipient +describes end user's rights relating to the Subject Software. If Recipient +obtains such knowledge after it makes Subject Software available to any other +person or entity, Recipient shall take other steps (such as notifying appro- +priate mailing lists or newsgroups) reasonably calculated to provide such +knowledge to those who received the Subject Software. + +8. DISCLAIMER OF WARRANTY. SUBJECT SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, +WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT +LIMITATION, WARRANTIES THAT THE SUBJECT SOFTWARE IS FREE OF DEFECTS, MER- +CHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. SGI ASSUMES NO +RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. SHOULD ANY SOFTWARE +PROVE DEFECTIVE IN ANY RESPECT, SGI ASSUMES NO COST OR LIABILITY FOR ANY SER- +VICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN +ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY SUBJECT SOFTWARE IS AUTHORIZED +HEREUNDER EXCEPT UNDER THIS DISCLAIMER. + +9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, +WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT LIABILITY), +CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE FOR ANY +CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SUBJECT SOFTWARE OR +THE USE OR OTHER DEALINGS IN THE SUBJECT SOFTWARE. SOME JURISDICTIONS DO NOT +ALLOW THE EXCLUSION OR LIMITATION OF CERTAIN DAMAGES, SO THIS EXCLUSION AND +LIMITATION MAY NOT APPLY TO RECIPIENT TO THE EXTENT SO DISALLOWED. + +10. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this License. +Recipient will defend, indemnify and hold SGI and its successors and assigns +harmless from and against any loss, liability, damages, costs or expenses +(including the payment of reasonable attorneys fees) arising out of (Recipi- +ent's use, modification, reproduction and distribution of the Subject Soft- +ware or out of any representation or warranty made by Recipient. + +11. U.S. Government End Users. The Subject Software is a "commercial item" +consisting of "commercial computer software" as such terms are defined in +title 48 of the Code of Federal Regulations and all U.S. Government End Users +acquire only the rights set forth in this License and are subject to the +terms of this License. + +12. Miscellaneous. This License represents the complete agreement concerning +subject matter hereof. If any provision of this License is held to be unen- +forceable by any judicial or administrative authority having proper jurisdic- +tion with respect thereto, such provision shall be reformed so as to achieve +as nearly as possible the same economic effect as the original provision and +the remainder of this License will remain in effect. This License shall be +governed by and construed in accordance with the laws of the United States +and the State of California as applied to agreements entered into and to be +performed entirely within California between California residents. Any liti- +gation relating to this License shall be subject to the exclusive jurisdic- +tion of the Federal Courts of the Northern District of California (or, absent +subject matter jurisdiction in such courts, the courts of the State of Cali- +fornia), with venue lying exclusively in Santa Clara County, California, with +the losing party responsible for costs, including without limitation, court +costs and reasonable attorneys fees and expenses. The application of the +United Nations Convention on Contracts for the International Sale of Goods is +expressly excluded. Any law or regulation that provides that the language of +a contract shall be construed against the drafter shall not apply to this +License. + +Exhibit A + +Copyright (c) 1994-1999 Silicon Graphics, Inc. + +The contents of this file are subject to the CID Font Code Public License +Version 1.0 (the "License"). You may not use this file except in compliance +with the License. You may obtain a copy of the License at Silicon Graphics, +Inc., attn: Legal Services, 2011 N. Shoreline Blvd., Mountain View, CA 94043 +or at http://www.sgi.com/software/opensource/cid/license.html + +Software distributed under the License is distributed on an "AS IS" basis. +ALL WARRANTIES ARE DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED +WARRANTIES OF MERCHANTABILITY, OF FITNESS FOR A PARTICULAR PURPOSE OR OF NON- +INFRINGEMENT. See the License for the specific language governing rights and +limitations under the License. + +The Original Software (as defined in the License) is CID font code that was +developed by Silicon Graphics, Inc. Those portions of the Subject Software +(as defined in the License) that were created by Silicon Graphics, Inc. are +Copyright (c) 1994-1999 Silicon Graphics, Inc. All Rights Reserved. + +[NOTE: When using this text in connection with Subject Software delivered +solely in object code form, Recipient may replace the words "this file" with +"this software" in both the first and second sentences.] + +******************************************************************************** + +XFree86's LICENSE document does not appear to be completely +comprehensive. + +Many files appear to be licensed under the "SGI FREE SOFTWARE +LICENSE B (Version 1.1 [02/22/2000])": + +SGI FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000]) + +1. Definitions. + + 1.1. "Additional Notice Provisions" means such additional provisions as + appear in the Notice in Original Code under the heading "Additional + Notice Provisions." + + 1.2. "Covered Code" means the Original Code or Modifications, or any + combination thereof. + + 1.3. "Hardware" means any physical device that accepts input, processes + input, stores the results of processing, and/or provides output. + + 1.4. "Larger Work" means a work that combines Covered Code or portions + thereof with code not governed by the terms of this License. + + 1.5. "Licensable" means having the right to grant, to the maximum + extent possible, whether at the time of the initial grant or + subsequently acquired, any and all of the rights conveyed herein. + + 1.6. "License" means this document. + + 1.7. "Licensed Patents" means patent claims Licensable by SGI that are + infringed by the use or sale of Original Code or any Modifications + provided by SGI, or any combination thereof. + + 1.8. "Modifications" means any addition to or deletion from the + substance or structure of the Original Code or any previous + Modifications. When Covered Code is released as a series of files, a + Modification is: + + A. Any addition to the contents of a file containing Original Code + and/or addition to or deletion from the contents of a file + containing previous Modifications. + + B. Any new file that contains any part of the Original Code or + previous Modifications. + + 1.9. "Notice" means any notice in Original Code or Covered Code, as + required by and in compliance with this License. + + 1.10. "Original Code" means source code of computer software code that + is described in the source code Notice required by Exhibit A as + Original Code, and updates and error corrections specifically thereto. + + 1.11. "Recipient" means an individual or a legal entity exercising + rights under, and complying with all of the terms of, this License or a + future version of this License issued under Section 8. For legal + entities, "Recipient" includes any entity that controls, is controlled + by, or is under common control with Recipient. For purposes of this + definition, "control" of an entity means (a) the power, direct or + indirect, to direct or manage such entity, or (b) ownership of fifty + percent (50%) or more of the outstanding shares or beneficial ownership + of such entity. + + 1.12. "Recipient Patents" means patent claims Licensable by a Recipient + that are infringed by the use or sale of Original Code or any + Modifications provided by SGI, or any combination thereof. + + 1.13. "SGI" means Silicon Graphics, Inc. + + 1.14. "SGI Patents" means patent claims Licensable by SGI other than + the Licensed Patents. + +2. License Grant and Restrictions. + + 2.1. SGI License Grant. Subject to the terms of this License and any + third party intellectual property claims, for the duration of + intellectual property protections inherent in the Original Code, SGI + hereby grants Recipient a worldwide, royalty-free, non-exclusive + license, to do the following: (i) under copyrights Licensable by SGI, + to reproduce, distribute, create derivative works from, and, to the + extent applicable, display and perform the Original Code and/or any + Modifications provided by SGI alone and/or as part of a Larger Work; + and (ii) under any Licensable Patents, to make, have made, use, sell, + offer for sale, import and/or otherwise transfer the Original Code + and/or any Modifications provided by SGI. Recipient accepts the terms + and conditions of this License by undertaking any of the aforementioned + actions. The patent license shall apply to the Covered Code if, at the + time any related Modification is added, such addition of the + Modification causes such combination to be covered by the Licensed + Patents. The patent license in Section 2.1(ii) shall not apply to any + other combinations that include the Modification. No patent license is + provided under SGI Patents for infringements of SGI Patents by + Modifications not provided by SGI or combinations of Original Code and + Modifications not provided by SGI. + + 2.2. Recipient License Grant. Subject to the terms of this License and + any third party intellectual property claims, Recipient hereby grants + SGI and any other Recipients a worldwide, royalty-free, non-exclusive + license, under any Recipient Patents, to make, have made, use, sell, + offer for sale, import and/or otherwise transfer the Original Code + and/or any Modifications provided by SGI. + + 2.3. No License For Hardware Implementations. The licenses granted in + Section 2.1 and 2.2 are not applicable to implementation in Hardware of + the algorithms embodied in the Original Code or any Modifications + provided by SGI . + +3. Redistributions. + + 3.1. Retention of Notice/Copy of License. The Notice set forth in + Exhibit A, below, must be conspicuously retained or included in any and + all redistributions of Covered Code. For distributions of the Covered + Code in source code form, the Notice must appear in every file that can + include a text comments field; in executable form, the Notice and a + copy of this License must appear in related documentation or collateral + where the Recipient's rights relating to Covered Code are described. + Any Additional Notice Provisions which actually appears in the Original + Code must also be retained or included in any and all redistributions + of Covered Code. + + 3.2. Alternative License. Provided that Recipient is in compliance with + the terms of this License, Recipient may, so long as without derogation + of any of SGI's rights in and to the Original Code, distribute the + source code and/or executable version(s) of Covered Code under (1) this + License; (2) a license identical to this License but for only such + changes as are necessary in order to clarify Recipient's role as + licensor of Modifications; and/or (3) a license of Recipient's + choosing, containing terms different from this License, provided that + the license terms include this Section 3 and Sections 4, 6, 7, 10, 12, + and 13, which terms may not be modified or superseded by any other + terms of such license. If Recipient elects to use any license other + than this License, Recipient must make it absolutely clear that any of + its terms which differ from this License are offered by Recipient + alone, and not by SGI. It is emphasized that this License is a limited + license, and, regardless of the license form employed by Recipient in + accordance with this Section 3.2, Recipient may relicense only such + rights, in Original Code and Modifications by SGI, as it has actually + been granted by SGI in this License. + + 3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any + liability incurred by SGI as a result of any such alternative license + terms Recipient offers. + +4. Termination. This License and the rights granted hereunder will +terminate automatically if Recipient breaches any term herein and fails to +cure such breach within 30 days thereof. Any sublicense to the Covered Code +that is properly granted shall survive any termination of this License, +absent termination by the terms of such sublicense. Provisions that, by +their nature, must remain in effect beyond the termination of this License, +shall survive. + +5. No Trademark Or Other Rights. This License does not grant any rights to: +(i) any software apart from the Covered Code, nor shall any other rights or +licenses not expressly granted hereunder arise by implication, estoppel or +otherwise with respect to the Covered Code; (ii) any trade name, trademark +or service mark whatsoever, including without limitation any related right +for purposes of endorsement or promotion of products derived from the +Covered Code, without prior written permission of SGI; or (iii) any title +to or ownership of the Original Code, which shall at all times remains with +SGI. All rights in the Original Code not expressly granted under this +License are reserved. + +6. Compliance with Laws; Non-Infringement. There are various worldwide +laws, regulations, and executive orders applicable to dispositions of +Covered Code, including without limitation export, re-export, and import +control laws, regulations, and executive orders, of the U.S. government and +other countries, and Recipient is reminded it is obliged to obey such laws, +regulations, and executive orders. Recipient may not distribute Covered +Code that (i) in any way infringes (directly or contributorily) any +intellectual property rights of any kind of any other person or entity or +(ii) breaches any representation or warranty, express, implied or +statutory, to which, under any applicable law, it might be deemed to have +been subject. + +7. Claims of Infringement. If Recipient learns of any third party claim +that any disposition of Covered Code and/or functionality wholly or +partially infringes the third party's intellectual property rights, +Recipient will promptly notify SGI of such claim. + +8. Versions of the License. SGI may publish revised and/or new versions of +the License from time to time, each with a distinguishing version number. +Once Covered Code has been published under a particular version of the +License, Recipient may, for the duration of the license, continue to use it +under the terms of that version, or choose to use such Covered Code under +the terms of any subsequent version published by SGI. Subject to the +provisions of Sections 3 and 4 of this License, only SGI may modify the +terms applicable to Covered Code created under this License. + +9. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED "AS IS." ALL EXPRESS +AND IMPLIED WARRANTIES AND CONDITIONS ARE DISCLAIMED, INCLUDING, WITHOUT +LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, +SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND +NON-INFRINGEMENT. SGI ASSUMES NO RISK AS TO THE QUALITY AND PERFORMANCE OF +THE SOFTWARE. SHOULD THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI +ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR OR CORRECTION. THIS +DISCLAIMER OF WARRANTY IS AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY +COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT SUBJECT TO THIS DISCLAIMER. +10. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES NOR LEGAL THEORY, +WHETHER TORT (INCLUDING, WITHOUT LIMITATION, NEGLIGENCE OR STRICT +LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR ANY SGI LICENSOR BE LIABLE +FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF +ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, +WORK STOPPAGE, LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND +ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN +INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY +SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM +SGI's NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. +SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL +OR CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND LIMITATION MAY NOT APPLY TO +RECIPIENT. + +11. Indemnity. Recipient shall be solely responsible for damages arising, +directly or indirectly, out of its utilization of rights under this +License. Recipient will defend, indemnify and hold harmless Silicon +Graphics, Inc. from and against any loss, liability, damages, costs or +expenses (including the payment of reasonable attorneys fees) arising out +of Recipient's use, modification, reproduction and distribution of the +Covered Code or out of any representation or warranty made by Recipient. + +12. U.S. Government End Users. The Covered Code is a "commercial item" +consisting of "commercial computer software" as such terms are defined in +title 48 of the Code of Federal Regulations and all U.S. Government End +Users acquire only the rights set forth in this License and are subject to +the terms of this License. + +13. Miscellaneous. This License represents the complete agreement +concerning the its subject matter. If any provision of this License is held +to be unenforceable, such provision shall be reformed so as to achieve as +nearly as possible the same legal and economic effect as the original +provision and the remainder of this License will remain in effect. This +License shall be governed by and construed in accordance with the laws of +the United States and the State of California as applied to agreements +entered into and to be performed entirely within California between +California residents. Any litigation relating to this License shall be +subject to the exclusive jurisdiction of the Federal Courts of the Northern +District of California (or, absent subject matter jurisdiction in such +courts, the courts of the State of California), with venue lying +exclusively in Santa Clara County, California, with the losing party +responsible for costs, including without limitation, court costs and +reasonable attorneys fees and expenses. The application of the United +Nations Convention on Contracts for the International Sale of Goods is +expressly excluded. Any law or regulation that provides that the language +of a contract shall be construed against the drafter shall not apply to +this License. + +Exhibit A + +License Applicability. Except to the extent portions of this file are made +subject to an alternative license as permitted in the SGI Free Software +License B, Version 1.1 (the "License"), the contents of this file are +subject only to the provisions of the License. You may not use this file +except in compliance with the License. You may obtain a copy of the License +at Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway, +Mountain View, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB + +Note that, as provided in the License, the Software is distributed on an +"AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +PARTICULAR PURPOSE, AND NON-INFRINGEMENT. + +Original Code. The Original Code is: [name of software, version number, and +release date], developed by Silicon Graphics, Inc. The Original Code is +Copyright (c) [dates of first publication, as appearing in the Notice in +the Original Code] Silicon Graphics, Inc. Copyright in any portions created +by third parties is as indicated elsewhere herein. All Rights Reserved. +Additional Notice Provisions: [such additional provisions, if any, as +appear in the Notice in the Original Code under the heading "Additional +Notice Provisions"] + +vim:set ai et sw=4 sts=4 tw=72: diff --git a/multitech/licenses/Xiph.org Foundation b/multitech/licenses/Xiph.org Foundation new file mode 100644 index 0000000..6111c6c --- /dev/null +++ b/multitech/licenses/Xiph.org Foundation @@ -0,0 +1,28 @@ +Copyright (c) 2002, Xiph.org Foundation + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: + +- Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + +- Redistributions in binary form must reproduce the above copyright +notice, this list of conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution. + +- Neither the name of the Xiph.org Foundation nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION +OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/defconfig b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/defconfig new file mode 100644 index 0000000..8338b3d --- /dev/null +++ b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/defconfig @@ -0,0 +1,91 @@ +# +# Automatically generated make config: don't edit +# Tue Jan 12 22:00:36 2010 +# +HAVE_DOT_CONFIG=y +CONFIG_BOARDNAME="at91sam9g20nf" +# CONFIG_AT91SAM9260EK is not set +# CONFIG_AT91SAM9261EK is not set +# CONFIG_AT91SAM9263EK is not set +# CONFIG_AT91SAM9RLEK is not set +# CONFIG_AT91SAM9XEEK is not set +# CONFIG_AT91SAM9G10EK is not set +CONFIG_AT91SAM9G20EK=y +# CONFIG_AT91SAM9G45EK is not set +# CONFIG_AT91SAM9G45EKES is not set +# CONFIG_AT91SAM9M10EK is not set +# CONFIG_AT91CAP9ADK is not set +# CONFIG_AT91CAP9STK is not set +# CONFIG_AFEB9260 is not set +CONFIG_CHIP="AT91SAM9G20" +CONFIG_BOARD="at91sam9g20ek" +CONFIG_MACH_TYPE="0x658" +CONFIG_LINK_ADDR="0x000000" +CONFIG_TOP_OF_MEMORY="0x301000" +CONFIG_BOOTSTRAP_MAXSIZE="13000" +# CONFIG_CRYSTAL_12_000MHZ is not set +# CONFIG_CRYSTAL_16_000MHZ is not set +# CONFIG_CRYSTAL_16_36766MHZ is not set +CONFIG_CRYSTAL_18_432MHZ=y +ALLOW_CRYSTAL_18_432MHZ=y +CONFIG_CRYSTAL="CRYSTAL_18_432MHZ" +# CONFIG_CPU_CLK_166MHZ is not set +# CONFIG_CPU_CLK_180MHZ is not set +# CONFIG_CPU_CLK_200MHZ is not set +# CONFIG_CPU_CLK_240MHZ is not set +# CONFIG_CPU_CLK_266MHZ is not set +CONFIG_CPU_CLK_400MHZ=y +ALLOW_CPU_CLK_400MHZ=y +# DISABLE_CPU_CLK_240MHZ is not set +# CONFIG_BUS_SPEED_83MHZ is not set +# CONFIG_BUS_SPEED_90MHZ is not set +# CONFIG_BUS_SPEED_100MHZ is not set +CONFIG_BUS_SPEED_133MHZ=y + +# +# Memory selection +# +CONFIG_SDRAM=y +# CONFIG_SDDRC is not set +# CONFIG_DDR2 is not set +ALLOW_DATAFLASH=y +# ALLOW_FLASH is not set +ALLOW_NANDFLASH=y +# ALLOW_SDCARD is not set +# ALLOW_PSRAM is not set +# ALLOW_SDRAM_16BIT is not set +# CONFIG_RAM_32MB is not set +CONFIG_RAM_64MB=y +# CONFIG_RAM_128MB is not set +# CONFIG_RAM_256MB is not set +# CONFIG_DATAFLASH is not set +# CONFIG_FLASH is not set +CONFIG_NANDFLASH=y +# CONFIG_SDCARD is not set +CONFIG_MEMORY="nandflash" +ALLOW_DATAFLASH_RECOVERY=y +ALLOW_BOOT_FROM_DATAFLASH_CS0=y +ALLOW_BOOT_FROM_DATAFLASH_CS1=y +DATAFLASHCARD_ON_CS0=y + +# +# NAND Flash configuration +# +# CONFIG_NANDFLASH_SMALL_BLOCKS is not set +CONFIG_PROJECT="nandflash" +CONFIG_LOAD_UBOOT=y +# CONFIG_LOAD_64KB is not set +# CONFIG_LOAD_1MB is not set +# CONFIG_LOAD_4MB is not set +CONFIG_IMG_ADDRESS="0x00020000" +CONFIG_IMG_SIZE="0x00040000" +CONFIG_JUMP_ADDR="0x23F00000" +CONFIG_APP_CHECK=y +# CONFIG_LONG_TEST is not set +CONFIG_DEBUG=y +CONFIG_VERBOSE=y +CONFIG_HW_INIT=y +# CONFIG_USER_HW_INIT is not set +# CONFIG_THUMB is not set +CONFIG_SX_AT91=y +CONFIG_RAW_AT91=y diff --git a/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/memory_bus_1.8v.patch b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/memory_bus_1.8v.patch new file mode 100644 index 0000000..045f255 --- /dev/null +++ b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp-embedded/memory_bus_1.8v.patch @@ -0,0 +1,22 @@ +Only in at91bootstrap-2.13/build: at91sam9g20nf +Only in at91bootstrap-2.13/config: .depend +Only in at91bootstrap-2.13: .config +diff -ru at91bootstrap-2.13/main.c at91bootstrap-2.13_new/main.c +--- at91bootstrap-2.13/main.c 2010-01-12 15:13:39.000000000 -0600 ++++ at91bootstrap-2.13_new/main.c 2011-03-08 06:26:35.463088000 -0600 +@@ -174,6 +174,14 @@ + user_hw_init(); + #endif + ++#ifdef CONFIG_USER_EBI_1V8 ++//This patch will configure the 9G20 to run a 1.8V memory bus ++ *((int *)AT91C_CCFG_EBICSA) &= ~(0x1 << 16); //1.8V bus ++#else ++ *((int *)AT91C_CCFG_EBICSA) |= (0x1 << 16); //3.3V bus ++#endif ++ ++ + #if defined(CONFIG_SDRAM) || defined(CONFIG_SDDRC) || defined(CONFIG_DDR2) + #if defined(CONFIG_LONG_TEST) + /* This will not work for the CAP9 where RAM in elsewhere */ +Only in at91bootstrap-2.13/result: at91sam9g20nf-nandflashboot-2.13-r0.map diff --git a/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig new file mode 100644 index 0000000..8338b3d --- /dev/null +++ b/multitech/recipes/at91bootstrap/at91bootstrap-2.13/mtcdp/defconfig @@ -0,0 +1,91 @@ +# +# Automatically generated make config: don't edit +# Tue Jan 12 22:00:36 2010 +# +HAVE_DOT_CONFIG=y +CONFIG_BOARDNAME="at91sam9g20nf" +# CONFIG_AT91SAM9260EK is not set +# CONFIG_AT91SAM9261EK is not set +# CONFIG_AT91SAM9263EK is not set +# CONFIG_AT91SAM9RLEK is not set +# CONFIG_AT91SAM9XEEK is not set +# CONFIG_AT91SAM9G10EK is not set +CONFIG_AT91SAM9G20EK=y +# CONFIG_AT91SAM9G45EK is not set +# CONFIG_AT91SAM9G45EKES is not set +# CONFIG_AT91SAM9M10EK is not set +# CONFIG_AT91CAP9ADK is not set +# CONFIG_AT91CAP9STK is not set +# CONFIG_AFEB9260 is not set +CONFIG_CHIP="AT91SAM9G20" +CONFIG_BOARD="at91sam9g20ek" +CONFIG_MACH_TYPE="0x658" +CONFIG_LINK_ADDR="0x000000" +CONFIG_TOP_OF_MEMORY="0x301000" +CONFIG_BOOTSTRAP_MAXSIZE="13000" +# CONFIG_CRYSTAL_12_000MHZ is not set +# CONFIG_CRYSTAL_16_000MHZ is not set +# CONFIG_CRYSTAL_16_36766MHZ is not set +CONFIG_CRYSTAL_18_432MHZ=y +ALLOW_CRYSTAL_18_432MHZ=y +CONFIG_CRYSTAL="CRYSTAL_18_432MHZ" +# CONFIG_CPU_CLK_166MHZ is not set +# CONFIG_CPU_CLK_180MHZ is not set +# CONFIG_CPU_CLK_200MHZ is not set +# CONFIG_CPU_CLK_240MHZ is not set +# CONFIG_CPU_CLK_266MHZ is not set +CONFIG_CPU_CLK_400MHZ=y +ALLOW_CPU_CLK_400MHZ=y +# DISABLE_CPU_CLK_240MHZ is not set +# CONFIG_BUS_SPEED_83MHZ is not set +# CONFIG_BUS_SPEED_90MHZ is not set +# CONFIG_BUS_SPEED_100MHZ is not set +CONFIG_BUS_SPEED_133MHZ=y + +# +# Memory selection +# +CONFIG_SDRAM=y +# CONFIG_SDDRC is not set +# CONFIG_DDR2 is not set +ALLOW_DATAFLASH=y +# ALLOW_FLASH is not set +ALLOW_NANDFLASH=y +# ALLOW_SDCARD is not set +# ALLOW_PSRAM is not set +# ALLOW_SDRAM_16BIT is not set +# CONFIG_RAM_32MB is not set +CONFIG_RAM_64MB=y +# CONFIG_RAM_128MB is not set +# CONFIG_RAM_256MB is not set +# CONFIG_DATAFLASH is not set +# CONFIG_FLASH is not set +CONFIG_NANDFLASH=y +# CONFIG_SDCARD is not set +CONFIG_MEMORY="nandflash" +ALLOW_DATAFLASH_RECOVERY=y +ALLOW_BOOT_FROM_DATAFLASH_CS0=y +ALLOW_BOOT_FROM_DATAFLASH_CS1=y +DATAFLASHCARD_ON_CS0=y + +# +# NAND Flash configuration +# +# CONFIG_NANDFLASH_SMALL_BLOCKS is not set +CONFIG_PROJECT="nandflash" +CONFIG_LOAD_UBOOT=y +# CONFIG_LOAD_64KB is not set +# CONFIG_LOAD_1MB is not set +# CONFIG_LOAD_4MB is not set +CONFIG_IMG_ADDRESS="0x00020000" +CONFIG_IMG_SIZE="0x00040000" +CONFIG_JUMP_ADDR="0x23F00000" +CONFIG_APP_CHECK=y +# CONFIG_LONG_TEST is not set +CONFIG_DEBUG=y +CONFIG_VERBOSE=y +CONFIG_HW_INIT=y +# CONFIG_USER_HW_INIT is not set +# CONFIG_THUMB is not set +CONFIG_SX_AT91=y +CONFIG_RAW_AT91=y diff --git a/multitech/recipes/at91bootstrap/at91bootstrap_2.13.bbappend b/multitech/recipes/at91bootstrap/at91bootstrap_2.13.bbappend new file mode 100644 index 0000000..7d74cdd --- /dev/null +++ b/multitech/recipes/at91bootstrap/at91bootstrap_2.13.bbappend @@ -0,0 +1,5 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" + +# run memory bus at 1.8v for mtcdp-embedded +SRC_URI_append_mtcdp-embedded = "file://memory_bus_1.8v.patch;patch=1" +AT91BOOTSTRAP_FLAGS_append_mtcdp-embedded = "-DCONFIG_USER_EBI_1V8" diff --git a/multitech/recipes/base-files/base-files/corecdp/issue b/multitech/recipes/base-files/base-files/corecdp/issue new file mode 100644 index 0000000..2a364bb --- /dev/null +++ b/multitech/recipes/base-files/base-files/corecdp/issue @@ -0,0 +1,8 @@ + _____ _____ _____ _____ + / ____| / ____| __ \\| __ \\ + | | ___ _ __ ___| | | | | | |__) | + | | / _ \\| '__/ _ \\ | | | | | ___/ + | |____| (_) | | | __/ |____| |__| | | + \\_____|\\___/|_| \\___|\\_____|_____/|_| + +Multi-Tech Systems CoreCDP Distribution \n \l diff --git a/multitech/recipes/base-files/base-files/corecdp/issue.net b/multitech/recipes/base-files/base-files/corecdp/issue.net new file mode 100644 index 0000000..7aaef6d --- /dev/null +++ b/multitech/recipes/base-files/base-files/corecdp/issue.net @@ -0,0 +1,8 @@ + _____ _____ _____ _____ + / ____| / ____| __ \| __ \ + | | ___ _ __ ___| | | | | | |__) | + | | / _ \| '__/ _ \ | | | | | ___/ + | |____| (_) | | | __/ |____| |__| | | + \_____|\___/|_| \___|\_____|_____/|_| + +Multi-Tech Systems CoreCDP Distribution %h diff --git a/multitech/recipes/base-files/base-files/corecdp/profile b/multitech/recipes/base-files/base-files/corecdp/profile new file mode 100644 index 0000000..0879251 --- /dev/null +++ b/multitech/recipes/base-files/base-files/corecdp/profile @@ -0,0 +1,34 @@ +# /etc/profile: system-wide .profile file for the Bourne shell (sh(1)) +# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...). + +PATH="/usr/local/bin:/usr/bin:/bin" +EDITOR="/bin/vi" # needed for packages like cron +test -z "$TERM" && TERM="vt100" # Basic terminal capab. For screen etc. + +if [ ! -e /etc/localtime ]; then + TZ="UTC" # Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html + # for an explanation of how to set this to your local timezone. + export TZ +fi + +if [ "`id -u`" -eq 0 ]; then + PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin +fi +if [ "$PS1" ]; then +# works for bash and ash (no other shells known to be in use here) + PS1='\$ ' +fi + +if [ -d /etc/profile.d ]; then + for i in /etc/profile.d/*.sh; do + if [ -r $i ]; then + . $i + fi + done + unset i +fi + +export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM + +umask 022 + diff --git a/multitech/recipes/base-files/base-files/mtcdp-embedded/fstab b/multitech/recipes/base-files/base-files/mtcdp-embedded/fstab new file mode 100644 index 0000000..84dc1f0 --- /dev/null +++ b/multitech/recipes/base-files/base-files/mtcdp-embedded/fstab @@ -0,0 +1,12 @@ +rootfs / auto defaults 1 1 +proc /proc proc defaults 0 0 +devpts /dev/pts devpts mode=0620,gid=5 0 0 +usbfs /proc/bus/usb usbfs defaults 0 0 +tmpfs /var/volatile tmpfs defaults 0 0 +tmpfs /dev/shm tmpfs mode=0777 0 0 +tmpfs /media/ram tmpfs defaults 0 0 + +/dev/mtdblock6 /var/config jffs2 defaults 0 0 + +# SD card +/dev/mmcblk0p1 /media/card auto defaults,sync 0 0 diff --git a/multitech/recipes/base-files/base-files/mtcdp-embedded/profile b/multitech/recipes/base-files/base-files/mtcdp-embedded/profile new file mode 100644 index 0000000..0879251 --- /dev/null +++ b/multitech/recipes/base-files/base-files/mtcdp-embedded/profile @@ -0,0 +1,34 @@ +# /etc/profile: system-wide .profile file for the Bourne shell (sh(1)) +# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...). + +PATH="/usr/local/bin:/usr/bin:/bin" +EDITOR="/bin/vi" # needed for packages like cron +test -z "$TERM" && TERM="vt100" # Basic terminal capab. For screen etc. + +if [ ! -e /etc/localtime ]; then + TZ="UTC" # Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html + # for an explanation of how to set this to your local timezone. + export TZ +fi + +if [ "`id -u`" -eq 0 ]; then + PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin +fi +if [ "$PS1" ]; then +# works for bash and ash (no other shells known to be in use here) + PS1='\$ ' +fi + +if [ -d /etc/profile.d ]; then + for i in /etc/profile.d/*.sh; do + if [ -r $i ]; then + . $i + fi + done + unset i +fi + +export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM + +umask 022 + diff --git a/multitech/recipes/base-files/base-files/mtcdp/fstab b/multitech/recipes/base-files/base-files/mtcdp/fstab new file mode 100644 index 0000000..84dc1f0 --- /dev/null +++ b/multitech/recipes/base-files/base-files/mtcdp/fstab @@ -0,0 +1,12 @@ +rootfs / auto defaults 1 1 +proc /proc proc defaults 0 0 +devpts /dev/pts devpts mode=0620,gid=5 0 0 +usbfs /proc/bus/usb usbfs defaults 0 0 +tmpfs /var/volatile tmpfs defaults 0 0 +tmpfs /dev/shm tmpfs mode=0777 0 0 +tmpfs /media/ram tmpfs defaults 0 0 + +/dev/mtdblock6 /var/config jffs2 defaults 0 0 + +# SD card +/dev/mmcblk0p1 /media/card auto defaults,sync 0 0 diff --git a/multitech/recipes/base-files/base-files/mtcdp/profile b/multitech/recipes/base-files/base-files/mtcdp/profile new file mode 100644 index 0000000..0879251 --- /dev/null +++ b/multitech/recipes/base-files/base-files/mtcdp/profile @@ -0,0 +1,34 @@ +# /etc/profile: system-wide .profile file for the Bourne shell (sh(1)) +# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...). + +PATH="/usr/local/bin:/usr/bin:/bin" +EDITOR="/bin/vi" # needed for packages like cron +test -z "$TERM" && TERM="vt100" # Basic terminal capab. For screen etc. + +if [ ! -e /etc/localtime ]; then + TZ="UTC" # Time Zone. Look at http://theory.uwinnipeg.ca/gnu/glibc/libc_303.html + # for an explanation of how to set this to your local timezone. + export TZ +fi + +if [ "`id -u`" -eq 0 ]; then + PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin +fi +if [ "$PS1" ]; then +# works for bash and ash (no other shells known to be in use here) + PS1='\$ ' +fi + +if [ -d /etc/profile.d ]; then + for i in /etc/profile.d/*.sh; do + if [ -r $i ]; then + . $i + fi + done + unset i +fi + +export PATH PS1 OPIEDIR QPEDIR QTDIR EDITOR TERM + +umask 022 + diff --git a/multitech/recipes/base-files/base-files_3.0.14.bbappend b/multitech/recipes/base-files/base-files_3.0.14.bbappend new file mode 100644 index 0000000..f1fc5c1 --- /dev/null +++ b/multitech/recipes/base-files/base-files_3.0.14.bbappend @@ -0,0 +1,19 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" + +PR .= ".corecdp1" + +dirs755_corecdp = "/bin /boot /dev ${sysconfdir} ${sysconfdir}/default \ + ${sysconfdir}/skel /lib /mnt /proc /home/root /sbin \ + ${prefix} ${bindir} ${docdir} ${includedir} \ + ${libdir} ${sbindir} ${datadir} \ + ${datadir}/common-licenses ${datadir}/dict ${infodir} \ + ${mandir} ${datadir}/misc ${localstatedir} \ + ${localstatedir}/backups ${localstatedir}/lib \ + ${localstatedir}/lib/misc ${localstatedir}/spool \ + ${localstatedir}/volatile ${localstatedir}/volatile/cache \ + ${localstatedir}/volatile/lock/subsys \ + ${localstatedir}/volatile/log \ + ${localstatedir}/volatile/run \ + /mnt /media /media/card /media/ram" + +media_corecdp = "card ram" diff --git a/multitech/recipes/busybox/busybox-1.13.2/corecdp/defconfig b/multitech/recipes/busybox/busybox-1.13.2/corecdp/defconfig new file mode 100644 index 0000000..c4b82b6 --- /dev/null +++ b/multitech/recipes/busybox/busybox-1.13.2/corecdp/defconfig @@ -0,0 +1,873 @@ +# +# Automatically generated make config: don't edit +# Busybox version: 1.13.2 +# Thu Apr 15 14:59:12 2010 +# +CONFIG_HAVE_DOT_CONFIG=y + +# +# Busybox Settings +# + +# +# General Configuration +# +# CONFIG_DESKTOP is not set +# CONFIG_EXTRA_COMPAT is not set +CONFIG_FEATURE_ASSUME_UNICODE=y +CONFIG_FEATURE_BUFFERS_USE_MALLOC=y +# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_SHOW_USAGE=y +CONFIG_FEATURE_VERBOSE_USAGE=y +CONFIG_FEATURE_COMPRESS_USAGE=y +# CONFIG_FEATURE_INSTALLER is not set +CONFIG_LOCALE_SUPPORT=y +CONFIG_GETOPT_LONG=y +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_CLEAN_UP is not set +CONFIG_FEATURE_PIDFILE=y +CONFIG_FEATURE_SUID=y +CONFIG_FEATURE_SUID_CONFIG=y +CONFIG_FEATURE_SUID_CONFIG_QUIET=y +# CONFIG_SELINUX is not set +# CONFIG_FEATURE_PREFER_APPLETS is not set +CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" +CONFIG_FEATURE_SYSLOG=y +CONFIG_FEATURE_HAVE_RPC=y + +# +# Build Options +# +# CONFIG_STATIC is not set +# CONFIG_PIE is not set +# CONFIG_NOMMU is not set +# CONFIG_BUILD_LIBBUSYBOX is not set +# CONFIG_FEATURE_INDIVIDUAL is not set +# CONFIG_FEATURE_SHARED_BUSYBOX is not set +CONFIG_LFS=y +CONFIG_CROSS_COMPILER_PREFIX="" + +# +# Debugging Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_PESSIMIZE is not set +# CONFIG_WERROR is not set +CONFIG_NO_DEBUG_LIB=y +# CONFIG_DMALLOC is not set +# CONFIG_EFENCE is not set +# CONFIG_INCLUDE_SUSv2 is not set + +# +# Installation Options +# +# CONFIG_INSTALL_NO_USR is not set +CONFIG_INSTALL_APPLET_SYMLINKS=y +# CONFIG_INSTALL_APPLET_HARDLINKS is not set +# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set +# CONFIG_INSTALL_APPLET_DONT is not set +# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set +# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set +# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set +CONFIG_PREFIX="./_install" + +# +# Busybox Library Tuning +# +CONFIG_PASSWORD_MINLEN=6 +CONFIG_MD5_SIZE_VS_SPEED=2 +CONFIG_FEATURE_FAST_TOP=y +# CONFIG_FEATURE_ETC_NETWORKS is not set +CONFIG_FEATURE_EDITING=y +CONFIG_FEATURE_EDITING_MAX_LEN=1024 +# CONFIG_FEATURE_EDITING_VI is not set +CONFIG_FEATURE_EDITING_HISTORY=64 +CONFIG_FEATURE_EDITING_SAVEHISTORY=y +CONFIG_FEATURE_TAB_COMPLETION=y +CONFIG_FEATURE_USERNAME_COMPLETION=y +CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y +CONFIG_FEATURE_COPYBUF_KB=4 +CONFIG_MONOTONIC_SYSCALL=y +CONFIG_IOCTL_HEX2STR_ERROR=y +CONFIG_FEATURE_HWIB=y + +# +# Applets +# + +# +# Archival Utilities +# +# CONFIG_FEATURE_SEAMLESS_LZMA is not set +CONFIG_FEATURE_SEAMLESS_BZ2=y +CONFIG_FEATURE_SEAMLESS_GZ=y +CONFIG_FEATURE_SEAMLESS_Z=y +CONFIG_AR=y +# CONFIG_FEATURE_AR_LONG_FILENAMES is not set +CONFIG_BUNZIP2=y +# CONFIG_BZIP2 is not set +CONFIG_CPIO=y +# CONFIG_FEATURE_CPIO_O is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set +CONFIG_GUNZIP=y +CONFIG_GZIP=y +# CONFIG_RPM2CPIO is not set +# CONFIG_RPM is not set +CONFIG_TAR=y +CONFIG_FEATURE_TAR_CREATE=y +CONFIG_FEATURE_TAR_AUTODETECT=y +CONFIG_FEATURE_TAR_FROM=y +CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y +# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set +CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y +CONFIG_FEATURE_TAR_LONG_OPTIONS=y +CONFIG_FEATURE_TAR_UNAME_GNAME=y +# CONFIG_UNCOMPRESS is not set +# CONFIG_UNLZMA is not set +# CONFIG_FEATURE_LZMA_FAST is not set +CONFIG_UNZIP=y + +# +# Coreutils +# +CONFIG_BASENAME=y +# CONFIG_CAL is not set +CONFIG_CAT=y +# CONFIG_CATV is not set +CONFIG_CHGRP=y +CONFIG_CHMOD=y +CONFIG_CHOWN=y +CONFIG_CHROOT=y +# CONFIG_CKSUM is not set +# CONFIG_COMM is not set +CONFIG_CP=y +CONFIG_CUT=y +CONFIG_DATE=y +CONFIG_FEATURE_DATE_ISOFMT=y +CONFIG_DD=y +CONFIG_FEATURE_DD_SIGNAL_HANDLING=y +# CONFIG_FEATURE_DD_IBS_OBS is not set +CONFIG_DF=y +CONFIG_FEATURE_DF_FANCY=y +CONFIG_DIRNAME=y +# CONFIG_DOS2UNIX is not set +# CONFIG_UNIX2DOS is not set +CONFIG_DU=y +CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y +CONFIG_ECHO=y +CONFIG_FEATURE_FANCY_ECHO=y +CONFIG_ENV=y +CONFIG_FEATURE_ENV_LONG_OPTIONS=y +# CONFIG_EXPAND is not set +# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set +CONFIG_EXPR=y +# CONFIG_EXPR_MATH_SUPPORT_64 is not set +CONFIG_FALSE=y +# CONFIG_FOLD is not set +CONFIG_HEAD=y +CONFIG_FEATURE_FANCY_HEAD=y +# CONFIG_HOSTID is not set +CONFIG_ID=y +# CONFIG_INSTALL is not set +# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set +# CONFIG_LENGTH is not set +CONFIG_LN=y +CONFIG_LOGNAME=y +CONFIG_LS=y +CONFIG_FEATURE_LS_FILETYPES=y +CONFIG_FEATURE_LS_FOLLOWLINKS=y +CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +CONFIG_FEATURE_LS_COLOR=y +# CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set +CONFIG_MD5SUM=y +CONFIG_MKDIR=y +CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y +CONFIG_MKFIFO=y +CONFIG_MKNOD=y +CONFIG_MV=y +CONFIG_FEATURE_MV_LONG_OPTIONS=y +CONFIG_NICE=y +CONFIG_NOHUP=y +CONFIG_OD=y +# CONFIG_PRINTENV is not set +CONFIG_PRINTF=y +CONFIG_PWD=y +CONFIG_READLINK=y +CONFIG_FEATURE_READLINK_FOLLOW=y +CONFIG_REALPATH=y +CONFIG_RM=y +CONFIG_RMDIR=y +CONFIG_FEATURE_RMDIR_LONG_OPTIONS=y +CONFIG_SEQ=y +# CONFIG_SHA1SUM is not set +CONFIG_SLEEP=y +CONFIG_FEATURE_FANCY_SLEEP=y +CONFIG_FEATURE_FLOAT_SLEEP=y +CONFIG_SORT=y +CONFIG_FEATURE_SORT_BIG=y +# CONFIG_SPLIT is not set +# CONFIG_FEATURE_SPLIT_FANCY is not set +CONFIG_STAT=y +CONFIG_FEATURE_STAT_FORMAT=y +CONFIG_STTY=y +# CONFIG_SUM is not set +CONFIG_SYNC=y +# CONFIG_TAC is not set +CONFIG_TAIL=y +CONFIG_FEATURE_FANCY_TAIL=y +CONFIG_TEE=y +CONFIG_FEATURE_TEE_USE_BLOCK_IO=y +CONFIG_TEST=y +# CONFIG_FEATURE_TEST_64 is not set +CONFIG_TOUCH=y +CONFIG_TR=y +CONFIG_FEATURE_TR_CLASSES=y +# CONFIG_FEATURE_TR_EQUIV is not set +CONFIG_TRUE=y +CONFIG_TTY=y +CONFIG_UNAME=y +# CONFIG_UNEXPAND is not set +# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set +CONFIG_UNIQ=y +CONFIG_USLEEP=y +# CONFIG_UUDECODE is not set +# CONFIG_UUENCODE is not set +CONFIG_WC=y +# CONFIG_FEATURE_WC_LARGE is not set +CONFIG_WHO=y +CONFIG_WHOAMI=y +CONFIG_YES=y + +# +# Common options for cp and mv +# +# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set + +# +# Common options for ls, more and telnet +# +CONFIG_FEATURE_AUTOWIDTH=y + +# +# Common options for df, du, ls +# +CONFIG_FEATURE_HUMAN_READABLE=y + +# +# Common options for md5sum, sha1sum +# +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y + +# +# Console Utilities +# +CONFIG_CHVT=y +CONFIG_CLEAR=y +CONFIG_DEALLOCVT=y +CONFIG_DUMPKMAP=y +# CONFIG_KBD_MODE is not set +CONFIG_LOADFONT=y +CONFIG_LOADKMAP=y +CONFIG_OPENVT=y +CONFIG_RESET=y +# CONFIG_RESIZE is not set +# CONFIG_FEATURE_RESIZE_PRINT is not set +CONFIG_SETCONSOLE=y +# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set +CONFIG_SETFONT=y +CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y +CONFIG_DEFAULT_SETFONT_DIR="" +# CONFIG_SETKEYCODES is not set +# CONFIG_SETLOGCONS is not set +CONFIG_SHOWKEY=y + +# +# Debian Utilities +# +CONFIG_MKTEMP=y +# CONFIG_PIPE_PROGRESS is not set +CONFIG_RUN_PARTS=y +CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y +CONFIG_FEATURE_RUN_PARTS_FANCY=y +CONFIG_START_STOP_DAEMON=y +CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y +CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y +CONFIG_WHICH=y + +# +# Editors +# +CONFIG_AWK=y +CONFIG_FEATURE_AWK_LIBM=y +CONFIG_CMP=y +CONFIG_DIFF=y +CONFIG_FEATURE_DIFF_BINARY=y +CONFIG_FEATURE_DIFF_DIR=y +CONFIG_FEATURE_DIFF_MINIMAL=y +# CONFIG_ED is not set +CONFIG_PATCH=y +CONFIG_SED=y +CONFIG_VI=y +CONFIG_FEATURE_VI_MAX_LEN=1024 +CONFIG_FEATURE_VI_8BIT=y +CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_YANKMARK=y +CONFIG_FEATURE_VI_SEARCH=y +CONFIG_FEATURE_VI_USE_SIGNALS=y +CONFIG_FEATURE_VI_DOT_CMD=y +# CONFIG_FEATURE_VI_READONLY is not set +# CONFIG_FEATURE_VI_SETOPTS is not set +CONFIG_FEATURE_VI_SET=y +CONFIG_FEATURE_VI_WIN_RESIZE=y +CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y +CONFIG_FEATURE_ALLOW_EXEC=y + +# +# Finding Utilities +# +CONFIG_FIND=y +CONFIG_FEATURE_FIND_PRINT0=y +CONFIG_FEATURE_FIND_MTIME=y +CONFIG_FEATURE_FIND_MMIN=y +CONFIG_FEATURE_FIND_PERM=y +CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_XDEV=y +CONFIG_FEATURE_FIND_MAXDEPTH=y +CONFIG_FEATURE_FIND_NEWER=y +CONFIG_FEATURE_FIND_INUM=y +CONFIG_FEATURE_FIND_EXEC=y +CONFIG_FEATURE_FIND_USER=y +CONFIG_FEATURE_FIND_GROUP=y +CONFIG_FEATURE_FIND_NOT=y +CONFIG_FEATURE_FIND_DEPTH=y +CONFIG_FEATURE_FIND_PAREN=y +CONFIG_FEATURE_FIND_SIZE=y +CONFIG_FEATURE_FIND_PRUNE=y +CONFIG_FEATURE_FIND_DELETE=y +CONFIG_FEATURE_FIND_PATH=y +CONFIG_FEATURE_FIND_REGEX=y +# CONFIG_FEATURE_FIND_CONTEXT is not set +CONFIG_GREP=y +CONFIG_FEATURE_GREP_EGREP_ALIAS=y +CONFIG_FEATURE_GREP_FGREP_ALIAS=y +CONFIG_FEATURE_GREP_CONTEXT=y +CONFIG_XARGS=y +# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set +CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y +CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y + +# +# Init Utilities +# +CONFIG_INIT=y +CONFIG_FEATURE_USE_INITTAB=y +CONFIG_FEATURE_KILL_REMOVED=y +CONFIG_FEATURE_KILL_DELAY=0 +# CONFIG_FEATURE_INIT_SCTTY is not set +# CONFIG_FEATURE_INIT_SYSLOG is not set +# CONFIG_FEATURE_EXTRA_QUIET is not set +# CONFIG_FEATURE_INIT_COREDUMPS is not set +CONFIG_FEATURE_INITRD=y +CONFIG_HALT=y +# CONFIG_MESG is not set + +# +# Login/Password Management Utilities +# +# CONFIG_FEATURE_SHADOWPASSWDS is not set +# CONFIG_USE_BB_PWD_GRP is not set +# CONFIG_USE_BB_SHADOW is not set +CONFIG_USE_BB_CRYPT=y +CONFIG_ADDGROUP=y +CONFIG_FEATURE_ADDUSER_TO_GROUP=y +CONFIG_DELGROUP=y +CONFIG_FEATURE_DEL_USER_FROM_GROUP=y +CONFIG_FEATURE_CHECK_NAMES=y +CONFIG_ADDUSER=y +CONFIG_FEATURE_ADDUSER_LONG_OPTIONS=y +CONFIG_DELUSER=y +CONFIG_GETTY=y +CONFIG_FEATURE_UTMP=y +CONFIG_FEATURE_WTMP=y +CONFIG_LOGIN=y +# CONFIG_PAM is not set +CONFIG_LOGIN_SCRIPTS=y +CONFIG_FEATURE_NOLOGIN=y +CONFIG_FEATURE_SECURETTY=y +CONFIG_PASSWD=y +CONFIG_FEATURE_PASSWD_WEAK_CHECK=y +CONFIG_CRYPTPW=y +CONFIG_CHPASSWD=y +CONFIG_SU=y +CONFIG_FEATURE_SU_SYSLOG=y +CONFIG_FEATURE_SU_CHECKS_SHELLS=y +CONFIG_SULOGIN=y +CONFIG_VLOCK=y + +# +# Linux Ext2 FS Progs +# +CONFIG_CHATTR=y +CONFIG_FSCK=y +# CONFIG_LSATTR is not set + +# +# Linux Module Utilities +# +CONFIG_DEFAULT_MODULES_DIR="/lib/modules" +CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" +# CONFIG_MODPROBE_SMALL is not set +# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set +# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set +CONFIG_INSMOD=y +CONFIG_RMMOD=y +CONFIG_LSMOD=y +CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y +CONFIG_MODPROBE=y +CONFIG_FEATURE_MODPROBE_BLACKLIST=y +# CONFIG_DEPMOD is not set + +# +# Options common to multiple modutils +# +# CONFIG_FEATURE_2_4_MODULES is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +CONFIG_FEATURE_MODUTILS_ALIAS=y +CONFIG_FEATURE_MODUTILS_SYMBOLS=y + +# +# Linux System Utilities +# +CONFIG_BLKID=y +CONFIG_DMESG=y +CONFIG_FEATURE_DMESG_PRETTY=y +CONFIG_FBSET=y +CONFIG_FEATURE_FBSET_FANCY=y +CONFIG_FEATURE_FBSET_READMODE=y +# CONFIG_FDFLUSH is not set +# CONFIG_FDFORMAT is not set +CONFIG_FDISK=y +CONFIG_FDISK_SUPPORT_LARGE_DISKS=y +CONFIG_FEATURE_FDISK_WRITABLE=y +# CONFIG_FEATURE_AIX_LABEL is not set +# CONFIG_FEATURE_SGI_LABEL is not set +# CONFIG_FEATURE_SUN_LABEL is not set +CONFIG_FEATURE_OSF_LABEL=y +CONFIG_FEATURE_FDISK_ADVANCED=y +# CONFIG_FINDFS is not set +CONFIG_FREERAMDISK=y +CONFIG_FSCK_MINIX=y +CONFIG_MKFS_MINIX=y + +# +# Minix filesystem support +# +CONFIG_FEATURE_MINIX2=y +CONFIG_GETOPT=y +CONFIG_HEXDUMP=y +# CONFIG_FEATURE_HEXDUMP_REVERSE is not set +# CONFIG_HD is not set +CONFIG_HWCLOCK=y +CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y +CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y +# CONFIG_IPCRM is not set +# CONFIG_IPCS is not set +CONFIG_LOSETUP=y +CONFIG_MDEV=y +CONFIG_FEATURE_MDEV_CONF=y +CONFIG_FEATURE_MDEV_RENAME=y +CONFIG_FEATURE_MDEV_RENAME_REGEXP=y +CONFIG_FEATURE_MDEV_EXEC=y +CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y +CONFIG_MKSWAP=y +# CONFIG_FEATURE_MKSWAP_V0 is not set +CONFIG_MORE=y +CONFIG_FEATURE_USE_TERMIOS=y +CONFIG_VOLUMEID=y +# CONFIG_FEATURE_VOLUMEID_EXT is not set +# CONFIG_FEATURE_VOLUMEID_REISERFS is not set +# CONFIG_FEATURE_VOLUMEID_FAT is not set +# CONFIG_FEATURE_VOLUMEID_HFS is not set +# CONFIG_FEATURE_VOLUMEID_JFS is not set +# CONFIG_FEATURE_VOLUMEID_XFS is not set +# CONFIG_FEATURE_VOLUMEID_NTFS is not set +# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set +# CONFIG_FEATURE_VOLUMEID_UDF is not set +# CONFIG_FEATURE_VOLUMEID_LUKS is not set +# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set +# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set +# CONFIG_FEATURE_VOLUMEID_ROMFS is not set +# CONFIG_FEATURE_VOLUMEID_SYSV is not set +# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set +# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set +CONFIG_MOUNT=y +# CONFIG_FEATURE_MOUNT_FAKE is not set +CONFIG_FEATURE_MOUNT_VERBOSE=y +CONFIG_FEATURE_MOUNT_HELPERS=y +CONFIG_FEATURE_MOUNT_LABEL=y +CONFIG_FEATURE_MOUNT_NFS=y +CONFIG_FEATURE_MOUNT_CIFS=y +CONFIG_FEATURE_MOUNT_FLAGS=y +CONFIG_FEATURE_MOUNT_FSTAB=y +CONFIG_PIVOT_ROOT=y +CONFIG_RDATE=y +CONFIG_RDEV=y +CONFIG_READPROFILE=y +CONFIG_RTCWAKE=y +# CONFIG_SCRIPT is not set +# CONFIG_SETARCH is not set +CONFIG_SWAPONOFF=y +# CONFIG_FEATURE_SWAPON_PRI is not set +CONFIG_SWITCH_ROOT=y +CONFIG_UMOUNT=y +CONFIG_FEATURE_UMOUNT_ALL=y + +# +# Common options for mount/umount +# +CONFIG_FEATURE_MOUNT_LOOP=y +# CONFIG_FEATURE_MTAB_SUPPORT is not set + +# +# Miscellaneous Utilities +# +# CONFIG_ADJTIMEX is not set +# CONFIG_BBCONFIG is not set +# CONFIG_CHAT is not set +# CONFIG_FEATURE_CHAT_NOFAIL is not set +# CONFIG_FEATURE_CHAT_TTY_HIFI is not set +# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set +# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set +# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set +# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set +# CONFIG_FEATURE_CHAT_CLR_ABORT is not set +# CONFIG_CHRT is not set +# CONFIG_CROND is not set +# CONFIG_FEATURE_CROND_D is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_CRONTAB is not set +CONFIG_DC=y +CONFIG_FEATURE_DC_LIBM=y +# CONFIG_DEVFSD is not set +# CONFIG_DEVFSD_MODLOAD is not set +# CONFIG_DEVFSD_FG_NP is not set +# CONFIG_DEVFSD_VERBOSE is not set +# CONFIG_FEATURE_DEVFS is not set +# CONFIG_DEVMEM is not set +# CONFIG_EJECT is not set +# CONFIG_FEATURE_EJECT_SCSI is not set +CONFIG_FBSPLASH=y +# CONFIG_INOTIFYD is not set +CONFIG_LAST=y +CONFIG_FEATURE_LAST_SMALL=y +# CONFIG_FEATURE_LAST_FANCY is not set +CONFIG_LESS=y +CONFIG_FEATURE_LESS_MAXLINES=9999999 +CONFIG_FEATURE_LESS_BRACKETS=y +CONFIG_FEATURE_LESS_FLAGS=y +# CONFIG_FEATURE_LESS_DASHCMD is not set +# CONFIG_FEATURE_LESS_MARKS is not set +# CONFIG_FEATURE_LESS_REGEXP is not set +# CONFIG_FEATURE_LESS_LINENUMS is not set +# CONFIG_FEATURE_LESS_WINCH is not set +# CONFIG_HDPARM is not set +# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set +# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set +# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +CONFIG_MAKEDEVS=y +# CONFIG_FEATURE_MAKEDEVS_LEAF is not set +CONFIG_FEATURE_MAKEDEVS_TABLE=y +# CONFIG_MAN is not set +CONFIG_MICROCOM=y +# CONFIG_MOUNTPOINT is not set +# CONFIG_MT is not set +# CONFIG_RAIDAUTORUN is not set +CONFIG_READAHEAD=y +# CONFIG_RUNLEVEL is not set +# CONFIG_RX is not set +# CONFIG_SETSID is not set +CONFIG_STRINGS=y +# CONFIG_TASKSET is not set +# CONFIG_FEATURE_TASKSET_FANCY is not set +CONFIG_TIME=y +# CONFIG_TTYSIZE is not set +# CONFIG_WATCHDOG is not set + +# +# Networking Utilities +# +CONFIG_FEATURE_IPV6=y +CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y +# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set +# CONFIG_ARP is not set +# CONFIG_ARPING is not set +# CONFIG_BRCTL is not set +# CONFIG_FEATURE_BRCTL_FANCY is not set +# CONFIG_FEATURE_BRCTL_SHOW is not set +# CONFIG_DNSD is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set +CONFIG_HOSTNAME=y +CONFIG_HTTPD=y +CONFIG_FEATURE_HTTPD_RANGES=y +CONFIG_FEATURE_HTTPD_USE_SENDFILE=y +CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y +CONFIG_FEATURE_HTTPD_SETUID=y +CONFIG_FEATURE_HTTPD_BASIC_AUTH=y +CONFIG_FEATURE_HTTPD_AUTH_MD5=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y +CONFIG_FEATURE_HTTPD_CGI=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y +CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y +CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y +CONFIG_FEATURE_HTTPD_ERROR_PAGES=y +CONFIG_FEATURE_HTTPD_PROXY=y +CONFIG_IFCONFIG=y +CONFIG_FEATURE_IFCONFIG_STATUS=y +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +CONFIG_FEATURE_IFCONFIG_HW=y +CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y +# CONFIG_IFENSLAVE is not set +CONFIG_IFUPDOWN=y +CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" +# CONFIG_FEATURE_IFUPDOWN_IP is not set +# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set +CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IPV4=y +CONFIG_FEATURE_IFUPDOWN_IPV6=y +CONFIG_FEATURE_IFUPDOWN_MAPPING=y +# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set +# CONFIG_INETD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set +# CONFIG_FEATURE_INETD_RPC is not set +CONFIG_IP=y +CONFIG_FEATURE_IP_ADDRESS=y +CONFIG_FEATURE_IP_LINK=y +CONFIG_FEATURE_IP_ROUTE=y +CONFIG_FEATURE_IP_TUNNEL=y +# CONFIG_FEATURE_IP_RULE is not set +# CONFIG_FEATURE_IP_SHORT_FORMS is not set +# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_IPRULE is not set +# CONFIG_IPCALC is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set +# CONFIG_NAMEIF is not set +# CONFIG_FEATURE_NAMEIF_EXTENDED is not set +CONFIG_NC=y +CONFIG_NC_SERVER=y +CONFIG_NC_EXTRA=y +CONFIG_NETSTAT=y +CONFIG_FEATURE_NETSTAT_WIDE=y +CONFIG_FEATURE_NETSTAT_PRG=y +CONFIG_NSLOOKUP=y +CONFIG_PING=y +CONFIG_PING6=y +CONFIG_FEATURE_FANCY_PING=y +# CONFIG_PSCAN is not set +CONFIG_ROUTE=y +# CONFIG_SLATTACH is not set +CONFIG_TELNET=y +# CONFIG_FEATURE_TELNET_TTYPE is not set +CONFIG_FEATURE_TELNET_AUTOLOGIN=y +CONFIG_TELNETD=y +# CONFIG_FEATURE_TELNETD_STANDALONE is not set +CONFIG_TFTP=y +# CONFIG_TFTPD is not set +CONFIG_FEATURE_TFTP_GET=y +CONFIG_FEATURE_TFTP_PUT=y +# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set +# CONFIG_TFTP_DEBUG is not set +CONFIG_TRACEROUTE=y +CONFIG_FEATURE_TRACEROUTE_VERBOSE=y +CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE=y +CONFIG_FEATURE_TRACEROUTE_USE_ICMP=y +CONFIG_APP_UDHCPD=y +CONFIG_APP_DHCPRELAY=y +CONFIG_APP_DUMPLEASES=y +# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set +CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases" +CONFIG_APP_UDHCPC=y +CONFIG_FEATURE_UDHCPC_ARPING=y +# CONFIG_FEATURE_UDHCP_PORT is not set +# CONFIG_UDHCP_DEBUG is not set +# CONFIG_FEATURE_UDHCP_RFC3397 is not set +CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" +CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80 +# CONFIG_VCONFIG is not set +CONFIG_WGET=y +CONFIG_FEATURE_WGET_STATUSBAR=y +CONFIG_FEATURE_WGET_AUTHENTICATION=y +CONFIG_FEATURE_WGET_LONG_OPTIONS=y +# CONFIG_ZCIP is not set +# CONFIG_TCPSVD is not set +# CONFIG_UDPSVD is not set + +# +# Print Utilities +# +# CONFIG_LPD is not set +# CONFIG_LPR is not set +# CONFIG_LPQ is not set + +# +# Mail Utilities +# +# CONFIG_MAKEMIME is not set +CONFIG_FEATURE_MIME_CHARSET="us-ascii" +# CONFIG_POPMAILDIR is not set +# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set +# CONFIG_REFORMIME is not set +# CONFIG_FEATURE_REFORMIME_COMPAT is not set +CONFIG_SENDMAIL=y +CONFIG_FEATURE_SENDMAIL_MAILX=y +# CONFIG_FEATURE_SENDMAIL_MAILXX is not set + +# +# Process Utilities +# +CONFIG_FREE=y +CONFIG_FUSER=y +CONFIG_KILL=y +CONFIG_KILLALL=y +# CONFIG_KILLALL5 is not set +# CONFIG_NMETER is not set +# CONFIG_PGREP is not set +CONFIG_PIDOF=y +CONFIG_FEATURE_PIDOF_SINGLE=y +CONFIG_FEATURE_PIDOF_OMIT=y +# CONFIG_PKILL is not set +CONFIG_PS=y +CONFIG_FEATURE_PS_WIDE=y +# CONFIG_FEATURE_PS_TIME is not set +# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set +CONFIG_RENICE=y +CONFIG_BB_SYSCTL=y +CONFIG_TOP=y +CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y +CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y +# CONFIG_FEATURE_TOP_SMP_CPU is not set +# CONFIG_FEATURE_TOP_DECIMALS is not set +# CONFIG_FEATURE_TOP_SMP_PROCESS is not set +# CONFIG_FEATURE_TOPMEM is not set +CONFIG_UPTIME=y +CONFIG_WATCH=y + +# +# Runit Utilities +# +# CONFIG_RUNSV is not set +# CONFIG_RUNSVDIR is not set +# CONFIG_FEATURE_RUNSVDIR_LOG is not set +# CONFIG_SV is not set +CONFIG_SV_DEFAULT_SERVICE_DIR="" +# CONFIG_SVLOGD is not set +# CONFIG_CHPST is not set +# CONFIG_SETUIDGID is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ENVDIR is not set +# CONFIG_SOFTLIMIT is not set +# CONFIG_CHCON is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_MATCHPATHCON is not set +# CONFIG_RESTORECON is not set +# CONFIG_RUNCON is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SETENFORCE is not set +# CONFIG_SETFILES is not set +# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_SETSEBOOL is not set +# CONFIG_SESTATUS is not set + +# +# Shells +# +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_MSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +CONFIG_ASH=y + +# +# Ash Shell Options +# +CONFIG_ASH_BASH_COMPAT=y +CONFIG_ASH_JOB_CONTROL=y +CONFIG_ASH_READ_NCHARS=y +CONFIG_ASH_READ_TIMEOUT=y +CONFIG_ASH_ALIAS=y +CONFIG_ASH_MATH_SUPPORT=y +# CONFIG_ASH_MATH_SUPPORT_64 is not set +CONFIG_ASH_GETOPTS=y +CONFIG_ASH_BUILTIN_ECHO=y +CONFIG_ASH_BUILTIN_PRINTF=y +CONFIG_ASH_BUILTIN_TEST=y +# CONFIG_ASH_CMDCMD is not set +# CONFIG_ASH_MAIL is not set +# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set +# CONFIG_ASH_RANDOM_SUPPORT is not set +CONFIG_ASH_EXPAND_PRMT=y +# CONFIG_HUSH is not set +# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_INTERACTIVE is not set +# CONFIG_HUSH_JOB is not set +# CONFIG_HUSH_TICK is not set +# CONFIG_HUSH_IF is not set +# CONFIG_HUSH_LOOPS is not set +# CONFIG_HUSH_CASE is not set +# CONFIG_LASH is not set +# CONFIG_MSH is not set + +# +# Bourne Shell Options +# +CONFIG_FEATURE_SH_EXTRA_QUIET=y +# CONFIG_FEATURE_SH_STANDALONE is not set +# CONFIG_FEATURE_SH_NOFORK is not set +# CONFIG_CTTYHACK is not set + +# +# System Logging Utilities +# +CONFIG_SYSLOGD=y +CONFIG_FEATURE_ROTATE_LOGFILE=y +CONFIG_FEATURE_REMOTE_LOG=y +CONFIG_FEATURE_SYSLOGD_DUP=y +CONFIG_FEATURE_IPC_SYSLOG=y +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 +CONFIG_LOGREAD=y +CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y +CONFIG_KLOGD=y +CONFIG_LOGGER=y diff --git a/multitech/recipes/busybox/busybox-1.13.2/corecdp/syslog.conf b/multitech/recipes/busybox/busybox-1.13.2/corecdp/syslog.conf new file mode 100644 index 0000000..047e824 --- /dev/null +++ b/multitech/recipes/busybox/busybox-1.13.2/corecdp/syslog.conf @@ -0,0 +1,9 @@ +DESTINATION="file" # log destinations (buffer file remote) +MARKINT=20 # interval between --mark-- entries [min] +REDUCE=no # reduced-size logging +BUFFERSIZE=64 # buffer: size of circular buffer [kByte] +LOGFILE=/var/log/messages # file: where to log +ROTATESIZE=32 # file: rotate log if grown beyond X [kByte] (busybox 1.2+) +ROTATEGENS=1 # file: keep X generations of rotated logs (busybox 1.2+) +REMOTE=loghost:514 # remote: where to log +FOREGROUND=no # run in foreground (don't use!) diff --git a/multitech/recipes/busybox/busybox-1.18.3/corecdp/defconfig b/multitech/recipes/busybox/busybox-1.18.3/corecdp/defconfig new file mode 100644 index 0000000..c4b82b6 --- /dev/null +++ b/multitech/recipes/busybox/busybox-1.18.3/corecdp/defconfig @@ -0,0 +1,873 @@ +# +# Automatically generated make config: don't edit +# Busybox version: 1.13.2 +# Thu Apr 15 14:59:12 2010 +# +CONFIG_HAVE_DOT_CONFIG=y + +# +# Busybox Settings +# + +# +# General Configuration +# +# CONFIG_DESKTOP is not set +# CONFIG_EXTRA_COMPAT is not set +CONFIG_FEATURE_ASSUME_UNICODE=y +CONFIG_FEATURE_BUFFERS_USE_MALLOC=y +# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set +# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set +CONFIG_SHOW_USAGE=y +CONFIG_FEATURE_VERBOSE_USAGE=y +CONFIG_FEATURE_COMPRESS_USAGE=y +# CONFIG_FEATURE_INSTALLER is not set +CONFIG_LOCALE_SUPPORT=y +CONFIG_GETOPT_LONG=y +CONFIG_FEATURE_DEVPTS=y +# CONFIG_FEATURE_CLEAN_UP is not set +CONFIG_FEATURE_PIDFILE=y +CONFIG_FEATURE_SUID=y +CONFIG_FEATURE_SUID_CONFIG=y +CONFIG_FEATURE_SUID_CONFIG_QUIET=y +# CONFIG_SELINUX is not set +# CONFIG_FEATURE_PREFER_APPLETS is not set +CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe" +CONFIG_FEATURE_SYSLOG=y +CONFIG_FEATURE_HAVE_RPC=y + +# +# Build Options +# +# CONFIG_STATIC is not set +# CONFIG_PIE is not set +# CONFIG_NOMMU is not set +# CONFIG_BUILD_LIBBUSYBOX is not set +# CONFIG_FEATURE_INDIVIDUAL is not set +# CONFIG_FEATURE_SHARED_BUSYBOX is not set +CONFIG_LFS=y +CONFIG_CROSS_COMPILER_PREFIX="" + +# +# Debugging Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_PESSIMIZE is not set +# CONFIG_WERROR is not set +CONFIG_NO_DEBUG_LIB=y +# CONFIG_DMALLOC is not set +# CONFIG_EFENCE is not set +# CONFIG_INCLUDE_SUSv2 is not set + +# +# Installation Options +# +# CONFIG_INSTALL_NO_USR is not set +CONFIG_INSTALL_APPLET_SYMLINKS=y +# CONFIG_INSTALL_APPLET_HARDLINKS is not set +# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set +# CONFIG_INSTALL_APPLET_DONT is not set +# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set +# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set +# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set +CONFIG_PREFIX="./_install" + +# +# Busybox Library Tuning +# +CONFIG_PASSWORD_MINLEN=6 +CONFIG_MD5_SIZE_VS_SPEED=2 +CONFIG_FEATURE_FAST_TOP=y +# CONFIG_FEATURE_ETC_NETWORKS is not set +CONFIG_FEATURE_EDITING=y +CONFIG_FEATURE_EDITING_MAX_LEN=1024 +# CONFIG_FEATURE_EDITING_VI is not set +CONFIG_FEATURE_EDITING_HISTORY=64 +CONFIG_FEATURE_EDITING_SAVEHISTORY=y +CONFIG_FEATURE_TAB_COMPLETION=y +CONFIG_FEATURE_USERNAME_COMPLETION=y +CONFIG_FEATURE_EDITING_FANCY_PROMPT=y +CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y +CONFIG_FEATURE_COPYBUF_KB=4 +CONFIG_MONOTONIC_SYSCALL=y +CONFIG_IOCTL_HEX2STR_ERROR=y +CONFIG_FEATURE_HWIB=y + +# +# Applets +# + +# +# Archival Utilities +# +# CONFIG_FEATURE_SEAMLESS_LZMA is not set +CONFIG_FEATURE_SEAMLESS_BZ2=y +CONFIG_FEATURE_SEAMLESS_GZ=y +CONFIG_FEATURE_SEAMLESS_Z=y +CONFIG_AR=y +# CONFIG_FEATURE_AR_LONG_FILENAMES is not set +CONFIG_BUNZIP2=y +# CONFIG_BZIP2 is not set +CONFIG_CPIO=y +# CONFIG_FEATURE_CPIO_O is not set +# CONFIG_DPKG is not set +# CONFIG_DPKG_DEB is not set +# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set +CONFIG_GUNZIP=y +CONFIG_GZIP=y +# CONFIG_RPM2CPIO is not set +# CONFIG_RPM is not set +CONFIG_TAR=y +CONFIG_FEATURE_TAR_CREATE=y +CONFIG_FEATURE_TAR_AUTODETECT=y +CONFIG_FEATURE_TAR_FROM=y +CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y +# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set +CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y +CONFIG_FEATURE_TAR_LONG_OPTIONS=y +CONFIG_FEATURE_TAR_UNAME_GNAME=y +# CONFIG_UNCOMPRESS is not set +# CONFIG_UNLZMA is not set +# CONFIG_FEATURE_LZMA_FAST is not set +CONFIG_UNZIP=y + +# +# Coreutils +# +CONFIG_BASENAME=y +# CONFIG_CAL is not set +CONFIG_CAT=y +# CONFIG_CATV is not set +CONFIG_CHGRP=y +CONFIG_CHMOD=y +CONFIG_CHOWN=y +CONFIG_CHROOT=y +# CONFIG_CKSUM is not set +# CONFIG_COMM is not set +CONFIG_CP=y +CONFIG_CUT=y +CONFIG_DATE=y +CONFIG_FEATURE_DATE_ISOFMT=y +CONFIG_DD=y +CONFIG_FEATURE_DD_SIGNAL_HANDLING=y +# CONFIG_FEATURE_DD_IBS_OBS is not set +CONFIG_DF=y +CONFIG_FEATURE_DF_FANCY=y +CONFIG_DIRNAME=y +# CONFIG_DOS2UNIX is not set +# CONFIG_UNIX2DOS is not set +CONFIG_DU=y +CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y +CONFIG_ECHO=y +CONFIG_FEATURE_FANCY_ECHO=y +CONFIG_ENV=y +CONFIG_FEATURE_ENV_LONG_OPTIONS=y +# CONFIG_EXPAND is not set +# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set +CONFIG_EXPR=y +# CONFIG_EXPR_MATH_SUPPORT_64 is not set +CONFIG_FALSE=y +# CONFIG_FOLD is not set +CONFIG_HEAD=y +CONFIG_FEATURE_FANCY_HEAD=y +# CONFIG_HOSTID is not set +CONFIG_ID=y +# CONFIG_INSTALL is not set +# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set +# CONFIG_LENGTH is not set +CONFIG_LN=y +CONFIG_LOGNAME=y +CONFIG_LS=y +CONFIG_FEATURE_LS_FILETYPES=y +CONFIG_FEATURE_LS_FOLLOWLINKS=y +CONFIG_FEATURE_LS_RECURSIVE=y +CONFIG_FEATURE_LS_SORTFILES=y +CONFIG_FEATURE_LS_TIMESTAMPS=y +CONFIG_FEATURE_LS_USERNAME=y +CONFIG_FEATURE_LS_COLOR=y +# CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set +CONFIG_MD5SUM=y +CONFIG_MKDIR=y +CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y +CONFIG_MKFIFO=y +CONFIG_MKNOD=y +CONFIG_MV=y +CONFIG_FEATURE_MV_LONG_OPTIONS=y +CONFIG_NICE=y +CONFIG_NOHUP=y +CONFIG_OD=y +# CONFIG_PRINTENV is not set +CONFIG_PRINTF=y +CONFIG_PWD=y +CONFIG_READLINK=y +CONFIG_FEATURE_READLINK_FOLLOW=y +CONFIG_REALPATH=y +CONFIG_RM=y +CONFIG_RMDIR=y +CONFIG_FEATURE_RMDIR_LONG_OPTIONS=y +CONFIG_SEQ=y +# CONFIG_SHA1SUM is not set +CONFIG_SLEEP=y +CONFIG_FEATURE_FANCY_SLEEP=y +CONFIG_FEATURE_FLOAT_SLEEP=y +CONFIG_SORT=y +CONFIG_FEATURE_SORT_BIG=y +# CONFIG_SPLIT is not set +# CONFIG_FEATURE_SPLIT_FANCY is not set +CONFIG_STAT=y +CONFIG_FEATURE_STAT_FORMAT=y +CONFIG_STTY=y +# CONFIG_SUM is not set +CONFIG_SYNC=y +# CONFIG_TAC is not set +CONFIG_TAIL=y +CONFIG_FEATURE_FANCY_TAIL=y +CONFIG_TEE=y +CONFIG_FEATURE_TEE_USE_BLOCK_IO=y +CONFIG_TEST=y +# CONFIG_FEATURE_TEST_64 is not set +CONFIG_TOUCH=y +CONFIG_TR=y +CONFIG_FEATURE_TR_CLASSES=y +# CONFIG_FEATURE_TR_EQUIV is not set +CONFIG_TRUE=y +CONFIG_TTY=y +CONFIG_UNAME=y +# CONFIG_UNEXPAND is not set +# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set +CONFIG_UNIQ=y +CONFIG_USLEEP=y +# CONFIG_UUDECODE is not set +# CONFIG_UUENCODE is not set +CONFIG_WC=y +# CONFIG_FEATURE_WC_LARGE is not set +CONFIG_WHO=y +CONFIG_WHOAMI=y +CONFIG_YES=y + +# +# Common options for cp and mv +# +# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set + +# +# Common options for ls, more and telnet +# +CONFIG_FEATURE_AUTOWIDTH=y + +# +# Common options for df, du, ls +# +CONFIG_FEATURE_HUMAN_READABLE=y + +# +# Common options for md5sum, sha1sum +# +CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y + +# +# Console Utilities +# +CONFIG_CHVT=y +CONFIG_CLEAR=y +CONFIG_DEALLOCVT=y +CONFIG_DUMPKMAP=y +# CONFIG_KBD_MODE is not set +CONFIG_LOADFONT=y +CONFIG_LOADKMAP=y +CONFIG_OPENVT=y +CONFIG_RESET=y +# CONFIG_RESIZE is not set +# CONFIG_FEATURE_RESIZE_PRINT is not set +CONFIG_SETCONSOLE=y +# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set +CONFIG_SETFONT=y +CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y +CONFIG_DEFAULT_SETFONT_DIR="" +# CONFIG_SETKEYCODES is not set +# CONFIG_SETLOGCONS is not set +CONFIG_SHOWKEY=y + +# +# Debian Utilities +# +CONFIG_MKTEMP=y +# CONFIG_PIPE_PROGRESS is not set +CONFIG_RUN_PARTS=y +CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y +CONFIG_FEATURE_RUN_PARTS_FANCY=y +CONFIG_START_STOP_DAEMON=y +CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y +CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y +CONFIG_WHICH=y + +# +# Editors +# +CONFIG_AWK=y +CONFIG_FEATURE_AWK_LIBM=y +CONFIG_CMP=y +CONFIG_DIFF=y +CONFIG_FEATURE_DIFF_BINARY=y +CONFIG_FEATURE_DIFF_DIR=y +CONFIG_FEATURE_DIFF_MINIMAL=y +# CONFIG_ED is not set +CONFIG_PATCH=y +CONFIG_SED=y +CONFIG_VI=y +CONFIG_FEATURE_VI_MAX_LEN=1024 +CONFIG_FEATURE_VI_8BIT=y +CONFIG_FEATURE_VI_COLON=y +CONFIG_FEATURE_VI_YANKMARK=y +CONFIG_FEATURE_VI_SEARCH=y +CONFIG_FEATURE_VI_USE_SIGNALS=y +CONFIG_FEATURE_VI_DOT_CMD=y +# CONFIG_FEATURE_VI_READONLY is not set +# CONFIG_FEATURE_VI_SETOPTS is not set +CONFIG_FEATURE_VI_SET=y +CONFIG_FEATURE_VI_WIN_RESIZE=y +CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y +CONFIG_FEATURE_ALLOW_EXEC=y + +# +# Finding Utilities +# +CONFIG_FIND=y +CONFIG_FEATURE_FIND_PRINT0=y +CONFIG_FEATURE_FIND_MTIME=y +CONFIG_FEATURE_FIND_MMIN=y +CONFIG_FEATURE_FIND_PERM=y +CONFIG_FEATURE_FIND_TYPE=y +CONFIG_FEATURE_FIND_XDEV=y +CONFIG_FEATURE_FIND_MAXDEPTH=y +CONFIG_FEATURE_FIND_NEWER=y +CONFIG_FEATURE_FIND_INUM=y +CONFIG_FEATURE_FIND_EXEC=y +CONFIG_FEATURE_FIND_USER=y +CONFIG_FEATURE_FIND_GROUP=y +CONFIG_FEATURE_FIND_NOT=y +CONFIG_FEATURE_FIND_DEPTH=y +CONFIG_FEATURE_FIND_PAREN=y +CONFIG_FEATURE_FIND_SIZE=y +CONFIG_FEATURE_FIND_PRUNE=y +CONFIG_FEATURE_FIND_DELETE=y +CONFIG_FEATURE_FIND_PATH=y +CONFIG_FEATURE_FIND_REGEX=y +# CONFIG_FEATURE_FIND_CONTEXT is not set +CONFIG_GREP=y +CONFIG_FEATURE_GREP_EGREP_ALIAS=y +CONFIG_FEATURE_GREP_FGREP_ALIAS=y +CONFIG_FEATURE_GREP_CONTEXT=y +CONFIG_XARGS=y +# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set +CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y +CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y +CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y + +# +# Init Utilities +# +CONFIG_INIT=y +CONFIG_FEATURE_USE_INITTAB=y +CONFIG_FEATURE_KILL_REMOVED=y +CONFIG_FEATURE_KILL_DELAY=0 +# CONFIG_FEATURE_INIT_SCTTY is not set +# CONFIG_FEATURE_INIT_SYSLOG is not set +# CONFIG_FEATURE_EXTRA_QUIET is not set +# CONFIG_FEATURE_INIT_COREDUMPS is not set +CONFIG_FEATURE_INITRD=y +CONFIG_HALT=y +# CONFIG_MESG is not set + +# +# Login/Password Management Utilities +# +# CONFIG_FEATURE_SHADOWPASSWDS is not set +# CONFIG_USE_BB_PWD_GRP is not set +# CONFIG_USE_BB_SHADOW is not set +CONFIG_USE_BB_CRYPT=y +CONFIG_ADDGROUP=y +CONFIG_FEATURE_ADDUSER_TO_GROUP=y +CONFIG_DELGROUP=y +CONFIG_FEATURE_DEL_USER_FROM_GROUP=y +CONFIG_FEATURE_CHECK_NAMES=y +CONFIG_ADDUSER=y +CONFIG_FEATURE_ADDUSER_LONG_OPTIONS=y +CONFIG_DELUSER=y +CONFIG_GETTY=y +CONFIG_FEATURE_UTMP=y +CONFIG_FEATURE_WTMP=y +CONFIG_LOGIN=y +# CONFIG_PAM is not set +CONFIG_LOGIN_SCRIPTS=y +CONFIG_FEATURE_NOLOGIN=y +CONFIG_FEATURE_SECURETTY=y +CONFIG_PASSWD=y +CONFIG_FEATURE_PASSWD_WEAK_CHECK=y +CONFIG_CRYPTPW=y +CONFIG_CHPASSWD=y +CONFIG_SU=y +CONFIG_FEATURE_SU_SYSLOG=y +CONFIG_FEATURE_SU_CHECKS_SHELLS=y +CONFIG_SULOGIN=y +CONFIG_VLOCK=y + +# +# Linux Ext2 FS Progs +# +CONFIG_CHATTR=y +CONFIG_FSCK=y +# CONFIG_LSATTR is not set + +# +# Linux Module Utilities +# +CONFIG_DEFAULT_MODULES_DIR="/lib/modules" +CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" +# CONFIG_MODPROBE_SMALL is not set +# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set +# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set +CONFIG_INSMOD=y +CONFIG_RMMOD=y +CONFIG_LSMOD=y +CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y +CONFIG_MODPROBE=y +CONFIG_FEATURE_MODPROBE_BLACKLIST=y +# CONFIG_DEPMOD is not set + +# +# Options common to multiple modutils +# +# CONFIG_FEATURE_2_4_MODULES is not set +# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set +# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set +# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set +# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set +CONFIG_FEATURE_CHECK_TAINTED_MODULE=y +CONFIG_FEATURE_MODUTILS_ALIAS=y +CONFIG_FEATURE_MODUTILS_SYMBOLS=y + +# +# Linux System Utilities +# +CONFIG_BLKID=y +CONFIG_DMESG=y +CONFIG_FEATURE_DMESG_PRETTY=y +CONFIG_FBSET=y +CONFIG_FEATURE_FBSET_FANCY=y +CONFIG_FEATURE_FBSET_READMODE=y +# CONFIG_FDFLUSH is not set +# CONFIG_FDFORMAT is not set +CONFIG_FDISK=y +CONFIG_FDISK_SUPPORT_LARGE_DISKS=y +CONFIG_FEATURE_FDISK_WRITABLE=y +# CONFIG_FEATURE_AIX_LABEL is not set +# CONFIG_FEATURE_SGI_LABEL is not set +# CONFIG_FEATURE_SUN_LABEL is not set +CONFIG_FEATURE_OSF_LABEL=y +CONFIG_FEATURE_FDISK_ADVANCED=y +# CONFIG_FINDFS is not set +CONFIG_FREERAMDISK=y +CONFIG_FSCK_MINIX=y +CONFIG_MKFS_MINIX=y + +# +# Minix filesystem support +# +CONFIG_FEATURE_MINIX2=y +CONFIG_GETOPT=y +CONFIG_HEXDUMP=y +# CONFIG_FEATURE_HEXDUMP_REVERSE is not set +# CONFIG_HD is not set +CONFIG_HWCLOCK=y +CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y +CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y +# CONFIG_IPCRM is not set +# CONFIG_IPCS is not set +CONFIG_LOSETUP=y +CONFIG_MDEV=y +CONFIG_FEATURE_MDEV_CONF=y +CONFIG_FEATURE_MDEV_RENAME=y +CONFIG_FEATURE_MDEV_RENAME_REGEXP=y +CONFIG_FEATURE_MDEV_EXEC=y +CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y +CONFIG_MKSWAP=y +# CONFIG_FEATURE_MKSWAP_V0 is not set +CONFIG_MORE=y +CONFIG_FEATURE_USE_TERMIOS=y +CONFIG_VOLUMEID=y +# CONFIG_FEATURE_VOLUMEID_EXT is not set +# CONFIG_FEATURE_VOLUMEID_REISERFS is not set +# CONFIG_FEATURE_VOLUMEID_FAT is not set +# CONFIG_FEATURE_VOLUMEID_HFS is not set +# CONFIG_FEATURE_VOLUMEID_JFS is not set +# CONFIG_FEATURE_VOLUMEID_XFS is not set +# CONFIG_FEATURE_VOLUMEID_NTFS is not set +# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set +# CONFIG_FEATURE_VOLUMEID_UDF is not set +# CONFIG_FEATURE_VOLUMEID_LUKS is not set +# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set +# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set +# CONFIG_FEATURE_VOLUMEID_ROMFS is not set +# CONFIG_FEATURE_VOLUMEID_SYSV is not set +# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set +# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set +CONFIG_MOUNT=y +# CONFIG_FEATURE_MOUNT_FAKE is not set +CONFIG_FEATURE_MOUNT_VERBOSE=y +CONFIG_FEATURE_MOUNT_HELPERS=y +CONFIG_FEATURE_MOUNT_LABEL=y +CONFIG_FEATURE_MOUNT_NFS=y +CONFIG_FEATURE_MOUNT_CIFS=y +CONFIG_FEATURE_MOUNT_FLAGS=y +CONFIG_FEATURE_MOUNT_FSTAB=y +CONFIG_PIVOT_ROOT=y +CONFIG_RDATE=y +CONFIG_RDEV=y +CONFIG_READPROFILE=y +CONFIG_RTCWAKE=y +# CONFIG_SCRIPT is not set +# CONFIG_SETARCH is not set +CONFIG_SWAPONOFF=y +# CONFIG_FEATURE_SWAPON_PRI is not set +CONFIG_SWITCH_ROOT=y +CONFIG_UMOUNT=y +CONFIG_FEATURE_UMOUNT_ALL=y + +# +# Common options for mount/umount +# +CONFIG_FEATURE_MOUNT_LOOP=y +# CONFIG_FEATURE_MTAB_SUPPORT is not set + +# +# Miscellaneous Utilities +# +# CONFIG_ADJTIMEX is not set +# CONFIG_BBCONFIG is not set +# CONFIG_CHAT is not set +# CONFIG_FEATURE_CHAT_NOFAIL is not set +# CONFIG_FEATURE_CHAT_TTY_HIFI is not set +# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set +# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set +# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set +# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set +# CONFIG_FEATURE_CHAT_CLR_ABORT is not set +# CONFIG_CHRT is not set +# CONFIG_CROND is not set +# CONFIG_FEATURE_CROND_D is not set +# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set +# CONFIG_CRONTAB is not set +CONFIG_DC=y +CONFIG_FEATURE_DC_LIBM=y +# CONFIG_DEVFSD is not set +# CONFIG_DEVFSD_MODLOAD is not set +# CONFIG_DEVFSD_FG_NP is not set +# CONFIG_DEVFSD_VERBOSE is not set +# CONFIG_FEATURE_DEVFS is not set +# CONFIG_DEVMEM is not set +# CONFIG_EJECT is not set +# CONFIG_FEATURE_EJECT_SCSI is not set +CONFIG_FBSPLASH=y +# CONFIG_INOTIFYD is not set +CONFIG_LAST=y +CONFIG_FEATURE_LAST_SMALL=y +# CONFIG_FEATURE_LAST_FANCY is not set +CONFIG_LESS=y +CONFIG_FEATURE_LESS_MAXLINES=9999999 +CONFIG_FEATURE_LESS_BRACKETS=y +CONFIG_FEATURE_LESS_FLAGS=y +# CONFIG_FEATURE_LESS_DASHCMD is not set +# CONFIG_FEATURE_LESS_MARKS is not set +# CONFIG_FEATURE_LESS_REGEXP is not set +# CONFIG_FEATURE_LESS_LINENUMS is not set +# CONFIG_FEATURE_LESS_WINCH is not set +# CONFIG_HDPARM is not set +# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set +# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set +# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set +# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set +CONFIG_MAKEDEVS=y +# CONFIG_FEATURE_MAKEDEVS_LEAF is not set +CONFIG_FEATURE_MAKEDEVS_TABLE=y +# CONFIG_MAN is not set +CONFIG_MICROCOM=y +# CONFIG_MOUNTPOINT is not set +# CONFIG_MT is not set +# CONFIG_RAIDAUTORUN is not set +CONFIG_READAHEAD=y +# CONFIG_RUNLEVEL is not set +# CONFIG_RX is not set +# CONFIG_SETSID is not set +CONFIG_STRINGS=y +# CONFIG_TASKSET is not set +# CONFIG_FEATURE_TASKSET_FANCY is not set +CONFIG_TIME=y +# CONFIG_TTYSIZE is not set +# CONFIG_WATCHDOG is not set + +# +# Networking Utilities +# +CONFIG_FEATURE_IPV6=y +CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y +# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set +# CONFIG_ARP is not set +# CONFIG_ARPING is not set +# CONFIG_BRCTL is not set +# CONFIG_FEATURE_BRCTL_FANCY is not set +# CONFIG_FEATURE_BRCTL_SHOW is not set +# CONFIG_DNSD is not set +# CONFIG_ETHER_WAKE is not set +# CONFIG_FAKEIDENTD is not set +# CONFIG_FTPGET is not set +# CONFIG_FTPPUT is not set +# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set +CONFIG_HOSTNAME=y +CONFIG_HTTPD=y +CONFIG_FEATURE_HTTPD_RANGES=y +CONFIG_FEATURE_HTTPD_USE_SENDFILE=y +CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP=y +CONFIG_FEATURE_HTTPD_SETUID=y +CONFIG_FEATURE_HTTPD_BASIC_AUTH=y +CONFIG_FEATURE_HTTPD_AUTH_MD5=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES=y +CONFIG_FEATURE_HTTPD_CGI=y +CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y +CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y +CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y +CONFIG_FEATURE_HTTPD_ERROR_PAGES=y +CONFIG_FEATURE_HTTPD_PROXY=y +CONFIG_IFCONFIG=y +CONFIG_FEATURE_IFCONFIG_STATUS=y +# CONFIG_FEATURE_IFCONFIG_SLIP is not set +# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set +CONFIG_FEATURE_IFCONFIG_HW=y +CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y +# CONFIG_IFENSLAVE is not set +CONFIG_IFUPDOWN=y +CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate" +# CONFIG_FEATURE_IFUPDOWN_IP is not set +# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set +CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN=y +CONFIG_FEATURE_IFUPDOWN_IPV4=y +CONFIG_FEATURE_IFUPDOWN_IPV6=y +CONFIG_FEATURE_IFUPDOWN_MAPPING=y +# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set +# CONFIG_INETD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set +# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set +# CONFIG_FEATURE_INETD_RPC is not set +CONFIG_IP=y +CONFIG_FEATURE_IP_ADDRESS=y +CONFIG_FEATURE_IP_LINK=y +CONFIG_FEATURE_IP_ROUTE=y +CONFIG_FEATURE_IP_TUNNEL=y +# CONFIG_FEATURE_IP_RULE is not set +# CONFIG_FEATURE_IP_SHORT_FORMS is not set +# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set +# CONFIG_IPADDR is not set +# CONFIG_IPLINK is not set +# CONFIG_IPROUTE is not set +# CONFIG_IPTUNNEL is not set +# CONFIG_IPRULE is not set +# CONFIG_IPCALC is not set +# CONFIG_FEATURE_IPCALC_FANCY is not set +# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set +# CONFIG_NAMEIF is not set +# CONFIG_FEATURE_NAMEIF_EXTENDED is not set +CONFIG_NC=y +CONFIG_NC_SERVER=y +CONFIG_NC_EXTRA=y +CONFIG_NETSTAT=y +CONFIG_FEATURE_NETSTAT_WIDE=y +CONFIG_FEATURE_NETSTAT_PRG=y +CONFIG_NSLOOKUP=y +CONFIG_PING=y +CONFIG_PING6=y +CONFIG_FEATURE_FANCY_PING=y +# CONFIG_PSCAN is not set +CONFIG_ROUTE=y +# CONFIG_SLATTACH is not set +CONFIG_TELNET=y +# CONFIG_FEATURE_TELNET_TTYPE is not set +CONFIG_FEATURE_TELNET_AUTOLOGIN=y +CONFIG_TELNETD=y +# CONFIG_FEATURE_TELNETD_STANDALONE is not set +CONFIG_TFTP=y +# CONFIG_TFTPD is not set +CONFIG_FEATURE_TFTP_GET=y +CONFIG_FEATURE_TFTP_PUT=y +# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set +# CONFIG_TFTP_DEBUG is not set +CONFIG_TRACEROUTE=y +CONFIG_FEATURE_TRACEROUTE_VERBOSE=y +CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE=y +CONFIG_FEATURE_TRACEROUTE_USE_ICMP=y +CONFIG_APP_UDHCPD=y +CONFIG_APP_DHCPRELAY=y +CONFIG_APP_DUMPLEASES=y +# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set +CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases" +CONFIG_APP_UDHCPC=y +CONFIG_FEATURE_UDHCPC_ARPING=y +# CONFIG_FEATURE_UDHCP_PORT is not set +# CONFIG_UDHCP_DEBUG is not set +# CONFIG_FEATURE_UDHCP_RFC3397 is not set +CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script" +CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80 +# CONFIG_VCONFIG is not set +CONFIG_WGET=y +CONFIG_FEATURE_WGET_STATUSBAR=y +CONFIG_FEATURE_WGET_AUTHENTICATION=y +CONFIG_FEATURE_WGET_LONG_OPTIONS=y +# CONFIG_ZCIP is not set +# CONFIG_TCPSVD is not set +# CONFIG_UDPSVD is not set + +# +# Print Utilities +# +# CONFIG_LPD is not set +# CONFIG_LPR is not set +# CONFIG_LPQ is not set + +# +# Mail Utilities +# +# CONFIG_MAKEMIME is not set +CONFIG_FEATURE_MIME_CHARSET="us-ascii" +# CONFIG_POPMAILDIR is not set +# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set +# CONFIG_REFORMIME is not set +# CONFIG_FEATURE_REFORMIME_COMPAT is not set +CONFIG_SENDMAIL=y +CONFIG_FEATURE_SENDMAIL_MAILX=y +# CONFIG_FEATURE_SENDMAIL_MAILXX is not set + +# +# Process Utilities +# +CONFIG_FREE=y +CONFIG_FUSER=y +CONFIG_KILL=y +CONFIG_KILLALL=y +# CONFIG_KILLALL5 is not set +# CONFIG_NMETER is not set +# CONFIG_PGREP is not set +CONFIG_PIDOF=y +CONFIG_FEATURE_PIDOF_SINGLE=y +CONFIG_FEATURE_PIDOF_OMIT=y +# CONFIG_PKILL is not set +CONFIG_PS=y +CONFIG_FEATURE_PS_WIDE=y +# CONFIG_FEATURE_PS_TIME is not set +# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set +CONFIG_RENICE=y +CONFIG_BB_SYSCTL=y +CONFIG_TOP=y +CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y +CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y +# CONFIG_FEATURE_TOP_SMP_CPU is not set +# CONFIG_FEATURE_TOP_DECIMALS is not set +# CONFIG_FEATURE_TOP_SMP_PROCESS is not set +# CONFIG_FEATURE_TOPMEM is not set +CONFIG_UPTIME=y +CONFIG_WATCH=y + +# +# Runit Utilities +# +# CONFIG_RUNSV is not set +# CONFIG_RUNSVDIR is not set +# CONFIG_FEATURE_RUNSVDIR_LOG is not set +# CONFIG_SV is not set +CONFIG_SV_DEFAULT_SERVICE_DIR="" +# CONFIG_SVLOGD is not set +# CONFIG_CHPST is not set +# CONFIG_SETUIDGID is not set +# CONFIG_ENVUIDGID is not set +# CONFIG_ENVDIR is not set +# CONFIG_SOFTLIMIT is not set +# CONFIG_CHCON is not set +# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set +# CONFIG_GETENFORCE is not set +# CONFIG_GETSEBOOL is not set +# CONFIG_LOAD_POLICY is not set +# CONFIG_MATCHPATHCON is not set +# CONFIG_RESTORECON is not set +# CONFIG_RUNCON is not set +# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set +# CONFIG_SELINUXENABLED is not set +# CONFIG_SETENFORCE is not set +# CONFIG_SETFILES is not set +# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set +# CONFIG_SETSEBOOL is not set +# CONFIG_SESTATUS is not set + +# +# Shells +# +CONFIG_FEATURE_SH_IS_ASH=y +# CONFIG_FEATURE_SH_IS_HUSH is not set +# CONFIG_FEATURE_SH_IS_MSH is not set +# CONFIG_FEATURE_SH_IS_NONE is not set +CONFIG_ASH=y + +# +# Ash Shell Options +# +CONFIG_ASH_BASH_COMPAT=y +CONFIG_ASH_JOB_CONTROL=y +CONFIG_ASH_READ_NCHARS=y +CONFIG_ASH_READ_TIMEOUT=y +CONFIG_ASH_ALIAS=y +CONFIG_ASH_MATH_SUPPORT=y +# CONFIG_ASH_MATH_SUPPORT_64 is not set +CONFIG_ASH_GETOPTS=y +CONFIG_ASH_BUILTIN_ECHO=y +CONFIG_ASH_BUILTIN_PRINTF=y +CONFIG_ASH_BUILTIN_TEST=y +# CONFIG_ASH_CMDCMD is not set +# CONFIG_ASH_MAIL is not set +# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set +# CONFIG_ASH_RANDOM_SUPPORT is not set +CONFIG_ASH_EXPAND_PRMT=y +# CONFIG_HUSH is not set +# CONFIG_HUSH_HELP is not set +# CONFIG_HUSH_INTERACTIVE is not set +# CONFIG_HUSH_JOB is not set +# CONFIG_HUSH_TICK is not set +# CONFIG_HUSH_IF is not set +# CONFIG_HUSH_LOOPS is not set +# CONFIG_HUSH_CASE is not set +# CONFIG_LASH is not set +# CONFIG_MSH is not set + +# +# Bourne Shell Options +# +CONFIG_FEATURE_SH_EXTRA_QUIET=y +# CONFIG_FEATURE_SH_STANDALONE is not set +# CONFIG_FEATURE_SH_NOFORK is not set +# CONFIG_CTTYHACK is not set + +# +# System Logging Utilities +# +CONFIG_SYSLOGD=y +CONFIG_FEATURE_ROTATE_LOGFILE=y +CONFIG_FEATURE_REMOTE_LOG=y +CONFIG_FEATURE_SYSLOGD_DUP=y +CONFIG_FEATURE_IPC_SYSLOG=y +CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16 +CONFIG_LOGREAD=y +CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y +CONFIG_KLOGD=y +CONFIG_LOGGER=y diff --git a/multitech/recipes/busybox/busybox-1.18.3/corecdp/syslog.conf b/multitech/recipes/busybox/busybox-1.18.3/corecdp/syslog.conf new file mode 100644 index 0000000..047e824 --- /dev/null +++ b/multitech/recipes/busybox/busybox-1.18.3/corecdp/syslog.conf @@ -0,0 +1,9 @@ +DESTINATION="file" # log destinations (buffer file remote) +MARKINT=20 # interval between --mark-- entries [min] +REDUCE=no # reduced-size logging +BUFFERSIZE=64 # buffer: size of circular buffer [kByte] +LOGFILE=/var/log/messages # file: where to log +ROTATESIZE=32 # file: rotate log if grown beyond X [kByte] (busybox 1.2+) +ROTATEGENS=1 # file: keep X generations of rotated logs (busybox 1.2+) +REMOTE=loghost:514 # remote: where to log +FOREGROUND=no # run in foreground (don't use!) diff --git a/multitech/recipes/busybox/busybox_1.13.2.bbappend b/multitech/recipes/busybox/busybox_1.13.2.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/busybox/busybox_1.13.2.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/busybox/busybox_1.18.3.bbappend b/multitech/recipes/busybox/busybox_1.18.3.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/busybox/busybox_1.18.3.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/cron/cron-3.0pl1/corecdp/disable_logfile.patch b/multitech/recipes/cron/cron-3.0pl1/corecdp/disable_logfile.patch new file mode 100644 index 0000000..1cd50f2 --- /dev/null +++ b/multitech/recipes/cron/cron-3.0pl1/corecdp/disable_logfile.patch @@ -0,0 +1,12 @@ +--- cron.orig/pathnames.h 2010-04-16 14:49:22.129854821 -0500 ++++ cron/pathnames.h 2010-04-16 14:51:02.870389134 -0500 +@@ -49,7 +49,8 @@ + */ + #define ALLOW_FILE "allow" /*-*/ + #define DENY_FILE "deny" /*-*/ +-#define LOG_FILE "log" /*-*/ ++/* Disable logging to a separate file in CRONDIR */ ++/*#define LOG_FILE "log"*/ /*-*/ + + /* where should the daemon stick its PID? + */ diff --git a/multitech/recipes/cron/cron_3.0pl1.bbappend b/multitech/recipes/cron/cron_3.0pl1.bbappend new file mode 100644 index 0000000..ef62f02 --- /dev/null +++ b/multitech/recipes/cron/cron_3.0pl1.bbappend @@ -0,0 +1,3 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" + +SRC_URI_append_corecdp = "file://disable_logfile.patch;patch=1" diff --git a/multitech/recipes/images/corecdp-base-image.bb b/multitech/recipes/images/corecdp-base-image.bb new file mode 100644 index 0000000..d0c4880 --- /dev/null +++ b/multitech/recipes/images/corecdp-base-image.bb @@ -0,0 +1,70 @@ +inherit image + +DISTRO_SSH_DAEMON ?= "dropbear" + +# remove kernel package from rootfs to save space +# uImage is flashed to a different partition, so it isn't needed +PACKAGE_REMOVE = "kernel-image-*" +ROOTFS_POSTPROCESS_COMMAND += "opkg-cl ${IPKG_ARGS} -force-depends \ + remove ${PACKAGE_REMOVE};" + +CORE_FEATURES = "u-boot sysfsutils module-init-tools kernel-modules \ + mtd-utils \ + usbutils usb-gadget-mode \ + bash \ + " + +FILESYSTEM_FEATURES = "e2fsprogs e2fsprogs-mke2fs e2fsprogs-fsck \ + dosfstools \ + cifs \ + " + +NETWORKING_FEATURES = "ppp \ + iptables iptables-utils \ + atftp netkit-ftp lftp curl \ + openssl \ + " + +TIME_FEATURES = "tzdata \ + cron \ + ntpdate \ + " + +# mts-io: IO Controller for Multi-Tech hardware. +# (LEDs, temp sensor, serial lines, and more) +# +# config: Handles default config files stored in /var/config. +# /var/config is mounted on separate flash partition so that config +# files survive flashing of rootfs. See recipe for details. +# +# u-boot-linux-utils: U-Boot environment access from Linux +MULTITECH_FEATURES = "mts-io \ + mts-id-eeprom \ + config \ + u-boot-linux-utils \ + " + +# Tools to flash kernel and rootfs on reboot +UPGRADE_FEATURES = "upgrade-reboot mtd-utils-static" + +MISC_FEATURES = "minicom lrzsz nano" + +# All the packages to be installed +IMAGE_INSTALL = "task-boot \ + util-linux-ng-mount util-linux-ng-umount \ + ${DISTRO_SSH_DAEMON} \ + ${CORE_FEATURES} \ + ${FILESYSTEM_FEATURES} \ + ${NETWORKING_FEATURES} \ + ${TIME_FEATURES} \ + ${MULTITECH_FEATURES} \ + ${UPGRADE_FEATURES} \ + ${MISC_FEATURES} \ + " + +IMAGE_PREPROCESS_COMMAND = "create_etc_timestamp" + +export IMAGE_BASENAME = "corecdp-base-image" +IMAGE_LINGUAS = "" + +require corecdp-tftpboot.inc diff --git a/multitech/recipes/images/corecdp-full-image.bb b/multitech/recipes/images/corecdp-full-image.bb new file mode 100644 index 0000000..ab2f249 --- /dev/null +++ b/multitech/recipes/images/corecdp-full-image.bb @@ -0,0 +1,40 @@ +require corecdp-base-image.bb + +LIGHTTPD = "lighttpd \ + lighttpd-module-cgi lighttpd-module-indexfile \ + lighttpd-module-redirect lighttpd-module-auth \ + lighttpd-module-access lighttpd-module-accesslog \ + lighttpd-module-rewrite lighttpd-module-proxy lighttpd-module-fastcgi \ + lighttpd-module-scgi lighttpd-module-alias \ + lighttpd-module-dirlisting lighttpd-module-staticfile \ + " + +IMAGE_INSTALL += "${LIGHTTPD}" + +IMAGE_INSTALL += "sqlite3" + +IMAGE_INSTALL += "perl" +IMAGE_INSTALL += "perl-module-io" +IMAGE_INSTALL += "libdevice-serialport-perl" +IMAGE_INSTALL += "libexpect-perl" + +IMAGE_INSTALL += "python" +IMAGE_INSTALL += "python-pyserial" +IMAGE_INSTALL += "python-simplejson" +IMAGE_INSTALL += "python-unixadmin" +IMAGE_INSTALL += "python-textutils" +IMAGE_INSTALL += "python-html" +IMAGE_INSTALL += "python-sqlite3" + +IMAGE_INSTALL += "ruby" + +# Java VM +IMAGE_INSTALL += "jamvm" + +IMAGE_INSTALL += "php php-cli php-cgi" + +# Multi-Tech SMS Utility (see http://git.multitech.net) +IMAGE_INSTALL += "sms-utils" + +export IMAGE_BASENAME = "corecdp-full-image" + diff --git a/multitech/recipes/images/corecdp-java-image.bb b/multitech/recipes/images/corecdp-java-image.bb new file mode 100644 index 0000000..8cdffb5 --- /dev/null +++ b/multitech/recipes/images/corecdp-java-image.bb @@ -0,0 +1,7 @@ +require corecdp-base-image.bb + +# Java VM +IMAGE_INSTALL += "jamvm" + +export IMAGE_BASENAME = "corecdp-java-image" + diff --git a/multitech/recipes/images/corecdp-minimal-image.bb b/multitech/recipes/images/corecdp-minimal-image.bb new file mode 100644 index 0000000..21bbbb8 --- /dev/null +++ b/multitech/recipes/images/corecdp-minimal-image.bb @@ -0,0 +1,42 @@ +inherit image + +DISTRO_SSH_DAEMON ?= "dropbear" + +# remove kernel package from rootfs to save space +# uImage is flashed to a different partition, so it isn't needed +PACKAGE_REMOVE = "kernel-image-*" +ROOTFS_POSTPROCESS_COMMAND += "opkg-cl ${IPKG_ARGS} -force-depends \ + remove ${PACKAGE_REMOVE};" + +CORE_FEATURES = "mtd-utils u-boot usbutils usb-gadget-mode \ + sysfsutils module-init-tools kernel-modules \ + bash \ + " + +NETWORKING_FEATURES = "ppp \ + atftp netkit-ftp lftp curl \ + iptables iptables-utils \ + " + +MULTITECH_FEATURES = "mts-io \ + config \ + " + +UPGRADE_FEATURES = "upgrade-reboot mtd-utils-static" + +IMAGE_PREPROCESS_COMMAND = "create_etc_timestamp" + +IMAGE_INSTALL = "task-boot \ + util-linux-ng-mount util-linux-ng-umount \ + ${DISTRO_SSH_DAEMON} \ + ${CORE_FEATURES} \ + ${NETWORKING_FEATURES} \ + ${MULTITECH_FEATURES} \ + ${UPGRADE_FEATURES} \ + " + +export IMAGE_BASENAME = "corecdp-minimal-image" +IMAGE_LINGUAS = "" + +require corecdp-tftpboot.inc + diff --git a/multitech/recipes/images/corecdp-perl-image.bb b/multitech/recipes/images/corecdp-perl-image.bb new file mode 100644 index 0000000..0a7c0aa --- /dev/null +++ b/multitech/recipes/images/corecdp-perl-image.bb @@ -0,0 +1,15 @@ +require corecdp-base-image.bb + +IMAGE_INSTALL += "perl" + +# add IO module +IMAGE_INSTALL += "perl-module-io" + +# all perl modules (large) +#IMAGE_INSTALL += "perl-modules" + +IMAGE_INSTALL += "libdevice-serialport-perl" +IMAGE_INSTALL += "libexpect-perl" + +export IMAGE_BASENAME = "corecdp-perl-image" + diff --git a/multitech/recipes/images/corecdp-python-image.bb b/multitech/recipes/images/corecdp-python-image.bb new file mode 100644 index 0000000..73aa8a7 --- /dev/null +++ b/multitech/recipes/images/corecdp-python-image.bb @@ -0,0 +1,14 @@ +require corecdp-base-image.bb + +IMAGE_INSTALL += "python" +IMAGE_INSTALL += "python-pyserial" +IMAGE_INSTALL += "python-simplejson" +IMAGE_INSTALL += "python-unixadmin" +IMAGE_INSTALL += "python-textutils" +IMAGE_INSTALL += "python-html" + +IMAGE_INSTALL += "sqlite3" +IMAGE_INSTALL += "python-sqlite3" + +export IMAGE_BASENAME = "corecdp-python-image" + diff --git a/multitech/recipes/images/corecdp-ruby-image.bb b/multitech/recipes/images/corecdp-ruby-image.bb new file mode 100644 index 0000000..d9e9758 --- /dev/null +++ b/multitech/recipes/images/corecdp-ruby-image.bb @@ -0,0 +1,6 @@ +require corecdp-base-image.bb + +IMAGE_INSTALL += "ruby" + +export IMAGE_BASENAME = "corecdp-ruby-image" + diff --git a/multitech/recipes/images/corecdp-tftpboot.inc b/multitech/recipes/images/corecdp-tftpboot.inc new file mode 100644 index 0000000..3650773 --- /dev/null +++ b/multitech/recipes/images/corecdp-tftpboot.inc @@ -0,0 +1,13 @@ + +# make links to images in TFTPBOOT_DIR for ease of development +do_build_append () { + if [ -n "${TFTPBOOT_DIR}" ]; then + install -d ${DEPLOY_DIR_IMAGE} + ln -nfs ${DEPLOY_DIR_IMAGE}/at91bootstrap.bin ${TFTPBOOT_DIR}/oe_bootstrap.bin + ln -nfs ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.bin ${TFTPBOOT_DIR}/oe_u-boot.bin + ln -nfs ${DEPLOY_DIR_IMAGE}/uImage-${MACHINE}.bin ${TFTPBOOT_DIR}/oe_uImage.bin + ln -nfs ${DEPLOY_DIR_IMAGE}/${IMAGE_BASENAME}-${MACHINE}.jffs2 ${TFTPBOOT_DIR}/oe_rootfs.jffs2 + ln -nfs ${DEPLOY_DIR_IMAGE} ${TFTPBOOT_DIR}/oe_images + fi +} + diff --git a/multitech/recipes/images/corecdp-webserver-image.bb b/multitech/recipes/images/corecdp-webserver-image.bb new file mode 100644 index 0000000..8b27023 --- /dev/null +++ b/multitech/recipes/images/corecdp-webserver-image.bb @@ -0,0 +1,17 @@ +require corecdp-base-image.bb + +LIGHTTPD = "lighttpd \ + lighttpd-module-cgi lighttpd-module-indexfile \ + lighttpd-module-redirect lighttpd-module-auth \ + lighttpd-module-access lighttpd-module-accesslog \ + lighttpd-module-rewrite lighttpd-module-proxy lighttpd-module-fastcgi \ + lighttpd-module-scgi lighttpd-module-alias \ + lighttpd-module-dirlisting lighttpd-module-staticfile \ + " + +IMAGE_INSTALL += "${LIGHTTPD}" + +IMAGE_INSTALL += "php php-cli php-cgi" + +export IMAGE_BASENAME = "corecdp-webserver-image" + diff --git a/multitech/recipes/initscripts/initscripts-1.0/corecdp/umountfs b/multitech/recipes/initscripts/initscripts-1.0/corecdp/umountfs new file mode 100644 index 0000000..ab3d709 --- /dev/null +++ b/multitech/recipes/initscripts/initscripts-1.0/corecdp/umountfs @@ -0,0 +1,120 @@ +#! /bin/sh +# +# umountfs Turn off swap and unmount all local filesystems. +# + +PATH=/sbin:/bin:/usr/sbin:/usr/bin + +umount_all() { + echo "Deactivating swap..." + swapoff -a + + # We leave /proc mounted. + echo "Unmounting local filesystems..." + mount -o remount,ro /mnt/ram + umount -f -a -r + + mount -o remount,ro / +} + +flash_upgrade() { + if [ $# -ne 1 ]; then + echo "need to specify flash-root" + return + fi + # flash_root must be a mountpoint that is not the rootfs and be mounted rw + local flash_root=${1} + + local flash_dir=${flash_root}/flash-upgrade + local uImage_file=${flash_dir}/uImage.bin + local rootfs_file=${flash_dir}/rootfs.jffs2 + + local reboot_cmd=/usr/sbin/upgrade-reboot + local nandwrite_cmd=/usr/bin/nandwrite.static + local mode= + local uImage_mtd= + local rootfs_mtd= + + if [ ! -d "${flash_dir}" ]; then + echo "${flash_dir} not present, skipping" + return + fi + + if ! mountpoint -q "${flash_root}"; then + echo "${flash_root} is not a mountpoint" + return + fi + + mode=$(grep "${flash_root}" /proc/mounts | cut -d ' ' -f 4 | cut -d ',' -f 1) + if [ "${mode}" != "rw" ]; then + echo "${flash_root} is not mounted rw" + return + fi + + if [ ! -x "${reboot_cmd}" ]; then + echo "${reboot_cmd} is not installed" + return + fi + + if [ ! -x "${nandwrite_cmd}" ]; then + echo "${nandwrite_cmd} is not installed" + return + fi + + uImage_mtd="/dev/$(cat /proc/mtd | grep uImage | cut -d : -f 1)" + if [ ! -c "${uImage_mtd}" ]; then + echo "No valid MTD partition is labeled uImage" + return + fi + + rootfs_mtd="/dev/$(cat /proc/mtd | grep Rootfs | cut -d : -f 1)" + if [ ! -c "${rootfs_mtd}" ]; then + echo "No valid MTD partition is labeled Rootfs" + return + fi + + if [ -f ${uImage_file} ]; then + echo "Flashing ${uImage_mtd} (uImage) with ${uImage_file}..." + + flash_eraseall ${uImage_mtd} + nandwrite -p ${uImage_mtd} ${uImage_file} + + echo "Remember to clean-up ${uImage_file} after reboot" + fi + + if [ -f ${rootfs_file} ]; then + echo "Flashing ${rootfs_mtd} (rootfs) with ${rootfs_file}..." + + cp ${reboot_cmd} ${flash_dir}/upgrade-reboot + cp ${nandwrite_cmd} ${flash_dir}/nandwrite.static + + sync + sleep 2 + mount -o remount,ro ${flash_root} + + # flash_root is not going to be umounted + sed -i -e "\\|${flash_root}| d" /etc/mtab + + umount_all + + flash_eraseall -j ${rootfs_mtd} + ${flash_dir}/nandwrite.static ${rootfs_mtd} ${rootfs_file} + + echo "Remember to clean-up ${flash_dir} after reboot" + echo "" + echo "Rebooting..." + + ${flash_dir}/upgrade-reboot + + # Should not get here normally + echo "upgrade-reboot failed" + exit 1 + fi +} + +flash_upgrade /var/volatile +flash_upgrade /media/card + +umount_all + +: exit 0 diff --git a/multitech/recipes/initscripts/initscripts_1.0.bbappend b/multitech/recipes/initscripts/initscripts_1.0.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/initscripts/initscripts_1.0.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/libpcap/libpcap-nobluetooth_1.0.0.bb b/multitech/recipes/libpcap/libpcap-nobluetooth_1.0.0.bb new file mode 100644 index 0000000..f7dc73f --- /dev/null +++ b/multitech/recipes/libpcap/libpcap-nobluetooth_1.0.0.bb @@ -0,0 +1,8 @@ +# libpcap without bluetooth support -- has MANY less dependencies +require recipes/libpcap/libpcap_${PV}.bb + +DEPENDS = "flex-native bison-native" +PROVIDES = "libpcap" +FILESPATHPKG =. "libpcap-${PV}:" +S = "${WORKDIR}/libpcap-${PV}" + diff --git a/multitech/recipes/libpcap/libpcap-nobluetooth_1.1.1.bb b/multitech/recipes/libpcap/libpcap-nobluetooth_1.1.1.bb new file mode 100644 index 0000000..f7dc73f --- /dev/null +++ b/multitech/recipes/libpcap/libpcap-nobluetooth_1.1.1.bb @@ -0,0 +1,8 @@ +# libpcap without bluetooth support -- has MANY less dependencies +require recipes/libpcap/libpcap_${PV}.bb + +DEPENDS = "flex-native bison-native" +PROVIDES = "libpcap" +FILESPATHPKG =. "libpcap-${PV}:" +S = "${WORKDIR}/libpcap-${PV}" + diff --git a/multitech/recipes/lighttpd/lighttpd/corecdp/lighttpd.conf b/multitech/recipes/lighttpd/lighttpd/corecdp/lighttpd.conf new file mode 100644 index 0000000..3ea4d41 --- /dev/null +++ b/multitech/recipes/lighttpd/lighttpd/corecdp/lighttpd.conf @@ -0,0 +1,328 @@ +# lighttpd configuration file +# +# use it as a base for lighttpd 1.0.0 and above +# +# $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ + +############ Options you really have to take care of #################### + +## modules to load +# at least mod_access and mod_accesslog should be loaded +# all other module should only be loaded if really neccesary +# - saves some time +# - saves memory +server.modules = ( +# "mod_rewrite", +# "mod_redirect", +# "mod_alias", + "mod_access", +# "mod_cml", +# "mod_trigger_b4_dl", +# "mod_auth", +# "mod_status", +# "mod_setenv", +# "mod_fastcgi", +# "mod_proxy", +# "mod_simple_vhost", +# "mod_evhost", +# "mod_userdir", +# "mod_cgi", +# "mod_compress", +# "mod_ssi", +# "mod_usertrack", +# "mod_expire", +# "mod_secdownload", +# "mod_rrdtool", +# "mod_webdav", + "mod_accesslog" ) + +## a static document-root, for virtual-hosting take look at the +## server.virtual-* options +server.document-root = "/www/pages/" + +## where to send error-messages to +server.errorlog = "/var/log/lighttpd.error.log" + +# files to check for if .../ is requested +index-file.names = ( "index.php", "index.html", + "index.htm", "default.htm" ) + +## set the event-handler (read the performance section in the manual) +# server.event-handler = "freebsd-kqueue" # needed on OS X + +# mimetype mapping +mimetype.assign = ( + ".pdf" => "application/pdf", + ".sig" => "application/pgp-signature", + ".spl" => "application/futuresplash", + ".class" => "application/octet-stream", + ".ps" => "application/postscript", + ".torrent" => "application/x-bittorrent", + ".dvi" => "application/x-dvi", + ".gz" => "application/x-gzip", + ".pac" => "application/x-ns-proxy-autoconfig", + ".swf" => "application/x-shockwave-flash", + ".tar.gz" => "application/x-tgz", + ".tgz" => "application/x-tgz", + ".tar" => "application/x-tar", + ".zip" => "application/zip", + ".mp3" => "audio/mpeg", + ".m3u" => "audio/x-mpegurl", + ".wma" => "audio/x-ms-wma", + ".wax" => "audio/x-ms-wax", + ".ogg" => "application/ogg", + ".wav" => "audio/x-wav", + ".gif" => "image/gif", + ".jpg" => "image/jpeg", + ".jpeg" => "image/jpeg", + ".png" => "image/png", + ".xbm" => "image/x-xbitmap", + ".xpm" => "image/x-xpixmap", + ".xwd" => "image/x-xwindowdump", + ".css" => "text/css", + ".html" => "text/html", + ".htm" => "text/html", + ".js" => "text/javascript", + ".asc" => "text/plain", + ".c" => "text/plain", + ".cpp" => "text/plain", + ".log" => "text/plain", + ".conf" => "text/plain", + ".text" => "text/plain", + ".txt" => "text/plain", + ".dtd" => "text/xml", + ".xml" => "text/xml", + ".mpeg" => "video/mpeg", + ".mpg" => "video/mpeg", + ".mov" => "video/quicktime", + ".qt" => "video/quicktime", + ".avi" => "video/x-msvideo", + ".asf" => "video/x-ms-asf", + ".asx" => "video/x-ms-asf", + ".wmv" => "video/x-ms-wmv", + ".bz2" => "application/x-bzip", + ".tbz" => "application/x-bzip-compressed-tar", + ".tar.bz2" => "application/x-bzip-compressed-tar" + ) + +# Use the "Content-Type" extended attribute to obtain mime type if possible +#mimetype.use-xattr = "enable" + + +## send a different Server: header +## be nice and keep it at lighttpd +# server.tag = "lighttpd" + +#### accesslog module +#accesslog.filename = "/var/log/lighttpd.access.log" +#debug.log-request-handling = "enable" + + + + +## deny access the file-extensions +# +# ~ is for backupfiles from vi, emacs, joe, ... +# .inc is often used for code includes which should in general not be part +# of the document-root +url.access-deny = ( "~", ".inc" ) + +$HTTP["url"] =~ "\.pdf$" { + server.range-requests = "disable" +} + +## +# which extensions should not be handle via static-file transfer +# +# .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi +static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) + +######### Options that are good to be but not neccesary to be changed ####### + +## bind to port (default: 80) +#server.port = 81 + +## bind to localhost (default: all interfaces) +#server.bind = "grisu.home.kneschke.de" + +## error-handler for status 404 +#server.error-handler-404 = "/error-handler.html" +#server.error-handler-404 = "/error-handler.php" + +## to help the rc.scripts +#server.pid-file = "/var/run/lighttpd.pid" + + +###### virtual hosts +## +## If you want name-based virtual hosting add the next three settings and load +## mod_simple_vhost +## +## document-root = +## virtual-server-root + virtual-server-default-host + virtual-server-docroot +## or +## virtual-server-root + http-host + virtual-server-docroot +## +#simple-vhost.server-root = "/home/weigon/wwwroot/servers/" +#simple-vhost.default-host = "grisu.home.kneschke.de" +#simple-vhost.document-root = "/pages/" + + +## +## Format: <errorfile-prefix><status-code>.html +## -> ..../status-404.html for 'File not found' +#server.errorfile-prefix = "/home/weigon/projects/lighttpd/doc/status-" + +## virtual directory listings +#dir-listing.activate = "enable" + +## enable debugging +#debug.log-request-header = "enable" +#debug.log-response-header = "enable" +#debug.log-request-handling = "enable" +#debug.log-file-not-found = "enable" + +### only root can use these options +# +# chroot() to directory (default: no chroot() ) +#server.chroot = "/" + +## change uid to <uid> (default: don't care) +#server.username = "wwwrun" + +## change uid to <uid> (default: don't care) +#server.groupname = "wwwrun" + +#### compress module +#compress.cache-dir = "/tmp/lighttpd/cache/compress/" +#compress.filetype = ("text/plain", "text/html") + +#### proxy module +## read proxy.txt for more info +#proxy.server = ( ".php" => +# ( "localhost" => +# ( +# "host" => "192.168.0.101", +# "port" => 80 +# ) +# ) +# ) + +#### fastcgi module +## read fastcgi.txt for more info +## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini +#fastcgi.server = ( ".php" => +# ( "localhost" => +# ( +# "socket" => "/tmp/php-fastcgi.socket", +# "bin-path" => "/usr/local/bin/php" +# ) +# ) +# ) + +#### CGI module +#cgi.assign = ( ".pl" => "/usr/bin/perl", +# ".cgi" => "/usr/bin/perl" ) +# + +#### SSL engine +#ssl.engine = "enable" +#ssl.pemfile = "server.pem" + +#### status module +#status.status-url = "/server-status" +#status.config-url = "/server-config" + +#### auth module +## read authentication.txt for more info +#auth.backend = "plain" +#auth.backend.plain.userfile = "lighttpd.user" +#auth.backend.plain.groupfile = "lighttpd.group" + +#auth.backend.ldap.hostname = "localhost" +#auth.backend.ldap.base-dn = "dc=my-domain,dc=com" +#auth.backend.ldap.filter = "(uid=$)" + +#auth.require = ( "/server-status" => +# ( +# "method" => "digest", +# "realm" => "download archiv", +# "require" => "user=jan" +# ), +# "/server-config" => +# ( +# "method" => "digest", +# "realm" => "download archiv", +# "require" => "valid-user" +# ) +# ) + +#### url handling modules (rewrite, redirect, access) +#url.rewrite = ( "^/$" => "/server-status" ) +#url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) + +#### both rewrite/redirect support back reference to regex conditional using %n +#$HTTP["host"] =~ "^www\.(.*)" { +# url.redirect = ( "^/(.*)" => "http://%1/$1" ) +#} + +# +# define a pattern for the host url finding +# %% => % sign +# %0 => domain name + tld +# %1 => tld +# %2 => domain name without tld +# %3 => subdomain 1 name +# %4 => subdomain 2 name +# +#evhost.path-pattern = "/home/storage/dev/www/%3/htdocs/" + +#### expire module +#expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") + +#### ssi +#ssi.extension = ( ".shtml" ) + +#### rrdtool +#rrdtool.binary = "/usr/bin/rrdtool" +#rrdtool.db-name = "/var/www/lighttpd.rrd" + +#### setenv +#setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) +#setenv.add-response-header = ( "X-Secret-Message" => "42" ) + +## for mod_trigger_b4_dl +# trigger-before-download.gdbm-filename = "/home/weigon/testbase/trigger.db" +# trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) +# trigger-before-download.trigger-url = "^/trigger/" +# trigger-before-download.download-url = "^/download/" +# trigger-before-download.deny-url = "http://127.0.0.1/index.html" +# trigger-before-download.trigger-timeout = 10 + +## for mod_cml +## don't forget to add index.cml to server.indexfiles +# cml.extension = ".cml" +# cml.memcache-hosts = ( "127.0.0.1:11211" ) + +#### variable usage: +## variable name without "." is auto prefixed by "var." and becomes "var.bar" +#bar = 1 +#var.mystring = "foo" + +## integer add +#bar += 1 +## string concat, with integer cast as string, result: "www.foo1.com" +#server.name = "www." + mystring + var.bar + ".com" +## array merge +#index-file.names = (foo + ".php") + index-file.names +#index-file.names += (foo + ".php") + +#### include +#include /etc/lighttpd/lighttpd-inc.conf +## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" +#include "lighttpd-inc.conf" + +#### include_shell +#include_shell "echo var.a=1" +## the above is same as: +#var.a=1 diff --git a/multitech/recipes/lighttpd/lighttpd_1.4.28.bbappend b/multitech/recipes/lighttpd/lighttpd_1.4.28.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/lighttpd/lighttpd_1.4.28.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig new file mode 100644 index 0000000..926d006 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/defconfig @@ -0,0 +1,1644 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32.3 +# Tue Oct 12 09:57:09 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9G10 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91SAM9G20=y +# CONFIG_ARCH_AT91SAM9G45 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9G20 Board Type +# +CONFIG_MACH_AT91SAM9G20EK=y +# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set +# CONFIG_MACH_CPU9G20 is not set + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" quiet " +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_H323=y +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=y +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_HL=y +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_ADDRTYPE=y +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=y +CONFIG_IP_NF_MATCH_TTL=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_NETMAP=y +CONFIG_IP_NF_TARGET_REDIRECT=y +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=y +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +CONFIG_NF_NAT_H323=y +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=y +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=m +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=m +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch new file mode 100644 index 0000000..3aa9096 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at25.patch @@ -0,0 +1,37 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c linux-2.6.32.3/drivers/misc/eeprom/at25.c +--- linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/misc/eeprom/at25.c 2010-10-27 11:05:36.000000000 -0500 +@@ -147,6 +147,7 @@ at25_ee_write(struct at25_data *at25, co + unsigned written = 0; + unsigned buf_size; + u8 *bounce; ++ int a8; + + if (unlikely(off >= at25->bin.size)) + return -EFBIG; +@@ -163,6 +164,11 @@ at25_ee_write(struct at25_data *at25, co + if (!bounce) + return -ENOMEM; + ++ if (!strcmp(at25->chip.name, "at25040b")) ++ a8 = 1; ++ else ++ a8 = 0; ++ + /* For write, rollover is within the page ... so we write at + * most one page, then manually roll over to the next page. + */ +@@ -183,6 +189,13 @@ at25_ee_write(struct at25_data *at25, co + break; + } + ++ if (a8) { ++ if (offset & BIT(8)) ++ bounce[0] |= BIT(3); ++ else ++ bounce[0] &= ~BIT(3); ++ } ++ + /* 8/16/24-bit address is written MSB first */ + switch (at25->addrlen) { + default: /* case 3 */ diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch new file mode 100644 index 0000000..820ce7f --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-at91_mci.patch @@ -0,0 +1,39 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c linux-2.6.32.3/drivers/mmc/host/at91_mci.c +--- linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mmc/host/at91_mci.c 2010-10-11 10:16:06.000000000 -0500 +@@ -201,7 +201,7 @@ static inline void at91_mci_sg_to_dma(st + len = data->sg_len; + + /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + +@@ -461,7 +461,7 @@ static void at91_mci_enable(struct at91m + at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); + mr = AT91_MCI_PDCMODE | 0x34a; + +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; + + at91_mci_write(host, AT91_MCI_MR, mr); +@@ -617,7 +617,7 @@ static void at91_mci_send_command(struct + * AT91SAM926[0/3] Data Write Operation and + * number of bytes erratum + */ +- if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260 () || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length < 12) + host->total_length = 12; + +@@ -1017,7 +1017,7 @@ static int __init at91_mci_probe(struct + host->bus_mode = 0; + host->board = pdev->dev.platform_data; + if (host->board->wire4) { +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mmc->caps |= MMC_CAP_4_BIT_DATA; + else + dev_warn(&pdev->dev, "4 wire bus mode not supported" diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch new file mode 100644 index 0000000..bd620af --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_serial_disable_hwhs.patch @@ -0,0 +1,32 @@ +Revert commit 8e706c4d0dab214c625a2df84a0ca69a76bae65d in linux-2.6: + avr32: add hardware handshake support to atmel_serial + +Reverting commit since it breaks hardware flow control for at91sam9g20 + +diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c +index 9d948bc..b659f2c 100644 +--- a/drivers/serial/atmel_serial.c ++++ b/drivers/serial/atmel_serial.c +@@ -1020,8 +1020,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL +- | ATMEL_US_NBSTOP | ATMEL_US_PAR +- | ATMEL_US_USMODE); ++ | ATMEL_US_NBSTOP | ATMEL_US_PAR); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud); +@@ -1066,12 +1065,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + } else + mode |= ATMEL_US_PAR_NONE; + +- /* hardware handshake (RTS/CTS) */ +- if (termios->c_cflag & CRTSCTS) +- mode |= ATMEL_US_USMODE_HWHS; +- else +- mode |= ATMEL_US_USMODE_NORMAL; +- + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch new file mode 100644 index 0000000..a7b87b3 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-atmel_spi.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c linux-2.6.32.3/drivers/spi/atmel_spi.c +--- linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/spi/atmel_spi.c 2010-09-08 13:38:52.000000000 -0500 +@@ -768,7 +768,7 @@ static int __init atmel_spi_probe(struct + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; +- master->num_chipselect = 4; ++ master->num_chipselect = 7; + master->setup = atmel_spi_setup; + master->transfer = atmel_spi_transfer; + master->cleanup = atmel_spi_cleanup; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch new file mode 100644 index 0000000..71d3a92 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-m25p80.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c linux-2.6.32.3/drivers/mtd/devices/m25p80.c +--- linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mtd/devices/m25p80.c 2010-10-14 11:36:06.000000000 -0500 +@@ -780,7 +780,7 @@ static int __devinit m25p_probe(struct s + * with the software protection bits set + */ + +- if (info->jedec_id >> 16 == 0x1f) { ++ if (info->jedec_id >> 16 == 0x1f || info->jedec_id == 0xbf258e) { + write_enable(flash); + write_sr(flash, 0); + } diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch new file mode 100644 index 0000000..315fe05 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-mach-at91-mtcdp-embedded.patch @@ -0,0 +1,363 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c 2010-10-11 10:15:08.000000000 -0500 +@@ -183,9 +183,9 @@ void __init at91_add_device_eth(struct a + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ +- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ +- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ +- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++ /*at91_set_B_periph(AT91_PIN_PA22, 0);*/ /* ETXER */ + } + + eth_data = *data; +@@ -571,7 +571,15 @@ static struct platform_device at91sam926 + .num_resources = ARRAY_SIZE(spi1_resources), + }; + +-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++static const unsigned spi1_standard_cs[7] = { ++ AT91_PIN_PB21, //cdp-embedded mapped to this one instead of AT91_PIN_PB3, ++ AT91_PIN_PC5, ++ AT91_PIN_PC4, ++ AT91_PIN_PC6, ++ AT91_PIN_PB12, ++ AT91_PIN_PB13, ++ AT91_PIN_PB16 ++}; + + void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) + { +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c 2010-10-14 16:16:52.000000000 -0500 +@@ -27,6 +27,11 @@ + #include <linux/gpio_keys.h> + #include <linux/input.h> + #include <linux/clk.h> ++#include <linux/i2c/at24.h> ++#include <linux/spi/eeprom.h> ++#include <linux/spi/flash.h> ++#include <linux/delay.h> ++#include <mach/at91_rtt.h> + + #include <mach/hardware.h> + #include <asm/setup.h> +@@ -44,9 +49,12 @@ + #include "sam9_smc.h" + #include "generic.h" + ++static int i2c_present; + + static void __init ek_map_io(void) + { ++ int tmp; ++ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + +@@ -61,12 +69,55 @@ static void __init ek_map_io(void) + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + ++ /* ++ * Reset any initiated i2c data transfers? ++ */ ++ at91_set_gpio_input(AT91_PIN_PA23, 0); ++ at91_set_gpio_output(AT91_PIN_PA24, 0); ++ for (tmp = 0; tmp < 11; tmp++) { ++ at91_set_gpio_value(AT91_PIN_PA24, 0); ++ udelay(20); ++ at91_set_gpio_value(AT91_PIN_PA24, 1); ++ udelay(20); ++ } ++ at91_set_gpio_input(AT91_PIN_PA24, 0); ++ ++ /* ++ * PA24 and PA23 are used as ID pins on MTCBA/MTCDP-0.0 and I2C pins on MTCDP-1.0. ++ * ++ * MTCBA Rev. B: 0x01, C: 0x02, D: 0x03 ++ * MTCDP Rev. A reads as 0x00 with TWCK and TWD pulled high ++ * ++ */ ++ tmp = !at91_get_gpio_value(AT91_PIN_PA24) << 1 | !at91_get_gpio_value(AT91_PIN_PA23); ++ ++ i2c_present = !tmp; ++ ++ /* ++ * The GPS receiver is either at US2 on MTCBA/MTCDP-0.0 and US3 on MTCDP-1.0. ++ */ ++ if (i2c_present) { ++ at91_register_uart(AT91SAM9260_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); ++ printk(KERN_INFO "sam9g20: i2c available\n"); ++ } else { ++ at91_register_uart(AT91SAM9260_ID_US2, 3, 0); ++ printk(KERN_INFO "sam9g20: i2c not available\n"); ++ } ++ + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); + } + + static void __init ek_init_irq(void) + { ++ /* ++ * Ensure RTT interrupts are disabled ++ */ ++ u32 mr; ++ mr = __raw_readl(AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ __raw_writel(mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN), ++ AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ + at91sam9260_init_interrupts(NULL); + } + +@@ -82,11 +133,38 @@ static struct at91_usbh_data __initdata + * USB Device port + */ + static struct at91_udc_data __initdata ek_udc_data = { +- .vbus_pin = AT91_PIN_PC5, +- .pullup_pin = 0, /* pull-up driven by UDC */ ++ .vbus_pin = AT91_PIN_PC12, ++ .pullup_pin = 0, /* pull-up driven by UDC */ + }; + + ++#define MTS_EXT_AT25_TEST 0 ++#if MTS_EXT_AT25_TEST ++static struct spi_eeprom at25040b = { ++ .byte_len = SZ_4K / 8, ++ .name = "at25040b", ++ .page_size = 8, ++ .flags = EE_ADDR1, ++}; ++#endif ++ ++#define MTS_EXT_STT25_TEST 0 ++#if MTS_EXT_STT25_TEST ++static struct mtd_partition m25_partitions[] = { ++ { ++ .name = "flash", ++ .offset = 0x00000000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct flash_platform_data m25_spi_flash_data = { ++ .type = "sst25vf080b", ++ .nr_parts = ARRAY_SIZE(m25_partitions), ++ .parts = m25_partitions, ++}; ++#endif ++ + /* + * SPI devices. + */ +@@ -107,6 +185,54 @@ static struct spi_board_info ek_spi_devi + }, + #endif + #endif ++ { ++ .modalias = "mts-io-sout", ++ .chip_select = 0, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-board-temp", ++ .chip_select = 2, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-dout", ++ .chip_select = 1, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-din", ++ .chip_select = 4, ++ .bus_num = 1, ++ }, ++#if MTS_EXT_AT25_TEST ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ .mode = SPI_MODE_0, ++ }, ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 6, ++ .mode = SPI_MODE_0, ++ }, ++#endif ++#if MTS_EXT_STT25_TEST ++ { ++ .modalias = "m25p80", ++ .platform_data = &m25_spi_flash_data, ++ .irq = NO_IRQ, ++ .max_speed_hz = 33 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ }, ++#endif + }; + + +@@ -115,7 +241,7 @@ static struct spi_board_info ek_spi_devi + */ + static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, +- .is_rmii = 1, ++ .is_rmii = 0, + }; + + +@@ -124,18 +250,48 @@ static struct at91_eth_data __initdata e + */ + static struct mtd_partition __initdata ek_nand_partition[] = { + { +- .name = "Bootstrap", +- .offset = 0, +- .size = 4 * SZ_1M, ++ .name = "MTNCG-NANDFlash", ++ .offset = 0, ++ .size = 256*1024*1024, ++ }, ++ { ++ .name = "AT91Bootstrap", ++ .offset = 0, ++ .size = 128*1024, + }, + { +- .name = "Partition 1", +- .offset = MTDPART_OFS_NXTBLK, +- .size = 60 * SZ_1M, ++ .name = "UBoot", ++ .offset = 128*1024, ++ .size = 256*1024, + }, + { +- .name = "Partition 2", +- .offset = MTDPART_OFS_NXTBLK, ++ .name = "UBoot Config", ++ .offset = 384*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "UBoot Redundant Config", ++ .offset = 512*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "uImage", ++ .offset = 640*1024, ++ .size = 59*128*1024, ++ }, ++ { ++ .name = "Config", ++ .offset = 64*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Oem Config", ++ .offset = 128*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Rootfs", ++ .offset = 192*128*1024, + .size = MTDPART_SIZ_FULL, + }, + }; +@@ -195,11 +351,13 @@ static void __init ek_add_device_nand(vo + + /* + * MCI (SD/MMC) +- * det_pin, wp_pin and vcc_pin are not connected ++ * det_pin, wp_pin and vcc_pin are not connected for embedded cdp REV0 + */ + static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, ++// .det_pin = AT91_PIN_PA6, ++// .wp_pin = AT91_PIN_PA9, + }; + + +@@ -207,15 +365,10 @@ static struct at91_mmc_data __initdata e + * LEDs + */ + static struct gpio_led ek_leds[] = { +- { /* "bottom" led, green, userled1 to be defined */ +- .name = "ds5", +- .gpio = AT91_PIN_PA6, ++ { /* "status" led, green */ ++ .name = "status", ++ .gpio = AT91_PIN_PA30, + .active_low = 1, +- .default_trigger = "none", +- }, +- { /* "power" led, yellow */ +- .name = "ds1", +- .gpio = AT91_PIN_PA9, + .default_trigger = "heartbeat", + } + }; +@@ -269,15 +422,37 @@ static void __init ek_add_device_buttons + static void __init ek_add_device_buttons(void) {} + #endif + ++uint8_t mts_id_eeprom[512]; ++ ++EXPORT_SYMBOL(mts_id_eeprom); ++ ++static void mts_id_eeprom_load(struct memory_accessor *macc, void *context) ++{ ++ int tmp; ++ ++ memset(mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ ++ tmp = macc->read(macc, mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ if (tmp != sizeof(mts_id_eeprom)) { ++ printk(KERN_ERR "sam9g20: id eeprom read failed: %d\n", tmp); ++ } else { ++ printk(KERN_INFO "sam9g20: read %d bytes from id eeprom\n", tmp); ++ } ++} ++ ++static struct at24_platform_data at24c04_data = { ++ .byte_len = SZ_4K / 8, ++ .page_size = 16, ++ .setup = mts_id_eeprom_load, ++}; + + static struct i2c_board_info __initdata ek_i2c_devices[] = { + { +- I2C_BOARD_INFO("24c512", 0x50), +- I2C_BOARD_INFO("wm8731", 0x1b), ++ I2C_BOARD_INFO("24c04", 0x56), ++ .platform_data = &at24c04_data, + }, + }; + +- + static void __init ek_board_init(void) + { + /* Serial */ +@@ -303,7 +478,7 @@ static void __init ek_board_init(void) + /* PCK0 provides MCLK to the WM8731 */ + at91_set_B_periph(AT91_PIN_PC1, 0); + /* SSC (for WM8731) */ +- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); ++ /* at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); */ + } + + MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch new file mode 100644 index 0000000..c778e53 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-option.patch @@ -0,0 +1,71 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/option.c linux-2.6.32.3/drivers/usb/serial/option.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/option.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/option.c 2010-09-02 13:24:59.000000000 -0500 +@@ -913,33 +913,46 @@ static void option_indat_callback(struct + dbg("%s: %p", __func__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; ++ port = urb->context; + +- if (status) { ++ switch (status) { ++ case 0: ++ /* success */ ++ break; ++ case -ECONNRESET: ++ case -ENOENT: ++ case -ESHUTDOWN: ++ /* this urb is terminated, clean up */ ++ dbg("%s: urb shutting down with status: %d on endpoint %02x.", ++ __func__, status, endpoint); ++ return; ++ default: + dbg("%s: nonzero status: %d on endpoint %02x.", +- __func__, status, endpoint); +- } else { ++ __func__, status, endpoint); ++ goto exit; ++ } ++ ++ usb_serial_debug_data(debug, &port->dev, __func__, ++ urb->actual_length, data); ++ ++ if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- if (urb->actual_length) { +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- } else +- dbg("%s: empty read urb received", __func__); +- tty_kref_put(tty); + +- /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN) { +- err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) +- printk(KERN_ERR "%s: resubmit read urb failed. " +- "(%d)", __func__, err); +- else +- usb_mark_last_busy(port->serial->dev); +- } ++ tty_buffer_request_room(tty, urb->actual_length); ++ tty_insert_flip_string(tty, data, urb->actual_length); ++ tty_flip_buffer_push(tty); + ++ tty_kref_put(tty); + } +- return; ++ ++exit: ++ /* Resubmit urb so we continue receiving */ ++ err = usb_submit_urb(urb, GFP_ATOMIC); ++ if (err && err != -EPERM) ++ printk(KERN_ERR "%s: resubmit read urb failed. " ++ "(%d)", __func__, err); ++ else ++ usb_mark_last_busy(port->serial->dev); + } + + static void option_outdat_callback(struct urb *urb) diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch new file mode 100644 index 0000000..2b90930 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp-embedded/linux-2.6.32.3-sierra.patch @@ -0,0 +1,1109 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c linux-2.6.32.3/drivers/usb/serial/sierra.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/sierra.c 2010-09-02 11:29:36.000000000 -0500 +@@ -16,8 +16,13 @@ + Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> + Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> + */ ++/* Uncomment to log function calls */ ++/* #define DEBUG */ ++/* Uncomment to force power level set to auto when attaching a device */ ++/* #define POWER_LEVEL_AUTO */ + +-#define DRIVER_VERSION "v.1.3.8" ++/* Sierra driver - kernel 2.6.32 */ ++#define DRIVER_VERSION "v.1.7.30" + #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" + #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" + +@@ -29,12 +34,18 @@ + #include <linux/module.h> + #include <linux/usb.h> + #include <linux/usb/serial.h> ++#include <asm/unaligned.h> + + #define SWIMS_USB_REQUEST_SetPower 0x00 ++#define SWIMS_USB_REQUEST_GetFwAttr 0x06 + #define SWIMS_USB_REQUEST_SetNmea 0x07 ++#define USB_REQUEST_TYPE_CLASS 0xA1 ++#define USB_REQUEST_IFACE 0x20 + +-#define N_IN_URB 8 +-#define N_OUT_URB 64 ++#define N_IN_URB_HM 8 ++#define N_OUT_URB_HM 64 ++#define N_IN_URB 4 ++#define N_OUT_URB 4 + #define IN_BUFLEN 4096 + + #define MAX_TRANSFER (PAGE_SIZE - 512) +@@ -42,19 +53,47 @@ + allocations > PAGE_SIZE and the number of packets in a page + is an integer 512 is the largest possible packet on EHCI */ + ++#define SWI_FW_ATTR_PM_MASK 0x02 ++/* PORTION_LEN defines the length of device attribute buffer */ ++#define PORTION_LEN 4096 ++ + static int debug; + static int nmea; + ++/* sysfs attributes */ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port); ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port); ++ + /* Used in interface blacklisting */ + struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ + }; + ++/* per interface statistics */ ++struct sierra_intf_stats { ++ atomic_t rx_bytes; /* received bytes */ ++ atomic_t indat_cb_cnt; /* indat callback count */ ++ atomic_t indat_cb_fail; /* indat cb with error */ ++ ++ atomic_t tx_bytes; /* transmitted bytes */ ++ atomic_t write_cnt; /* no. of writes */ ++ atomic_t write_err; /* no. of failed writes */ ++ ++ atomic_t delayed_writes; /* no. of delayed writes */ ++ atomic_t delayed_write_err; /* no. of delayed write errs */ ++ ++ atomic_t outdat_cb_cnt; /* outdat callback count */ ++ atomic_t outdat_cb_fail; /* outdat cb with error */ ++ ++}; ++ + struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; ++ ++ struct sierra_intf_stats stats; + }; + + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) +@@ -87,6 +126,38 @@ static int sierra_vsc_set_nmea(struct us + return result; + } + ++static int sierra_get_fw_attr(struct usb_device *udev, u16 *data) ++{ ++ int result; ++ u16 *attrdata; ++ ++ dev_dbg(&udev->dev, "%s\n", __func__); ++ ++ attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL); ++ if (!attrdata) ++ return -ENOMEM; ++ ++ result = usb_control_msg(udev, ++ usb_rcvctrlpipe(udev, 0), ++ SWIMS_USB_REQUEST_GetFwAttr, /* __u8 request*/ ++ USB_TYPE_VENDOR | USB_DIR_IN, /* request type*/ ++ 0x0000, /* __u16 value */ ++ 0x0000, /* __u16 index */ ++ attrdata, /* void *data */ ++ sizeof(*attrdata), /* _u16 size */ ++ USB_CTRL_SET_TIMEOUT); /* in timeout */ ++ ++ if (result < 0) { ++ kfree(attrdata); ++ return -EIO; ++ } ++ ++ *data = *attrdata; ++ ++ kfree(attrdata); ++ return result; ++} ++ + static int sierra_calc_num_ports(struct usb_serial *serial) + { + int num_ports = 0; +@@ -124,12 +195,28 @@ static int is_blacklisted(const u8 ifnum + return 0; + } + ++static int is_himemory(const u8 ifnum, ++ const struct sierra_iface_info *himemorylist) ++{ ++ const u8 *info; ++ int i; ++ ++ if (himemorylist) { ++ info = himemorylist->ifaceinfo; ++ ++ for (i=0; i < himemorylist->infolen; i++) { ++ if (info[i] == ifnum) ++ return 1; ++ } ++ } ++ return 0; ++} ++ + static int sierra_calc_interface(struct usb_serial *serial) + { + int interface; + struct usb_interface *p_interface; + struct usb_host_interface *p_host_interface; +- dev_dbg(&serial->dev->dev, "%s\n", __func__); + + /* Get the interface structure pointer from the serial struct */ + p_interface = serial->interface; +@@ -138,8 +225,7 @@ static int sierra_calc_interface(struct + p_host_interface = p_interface->cur_altsetting; + + /* read the interface descriptor for this active altsetting +- * to find out the interface number we are on +- */ ++ * to find out the interface number we are on */ + interface = p_host_interface->desc.bInterfaceNumber; + + return interface; +@@ -150,13 +236,15 @@ static int sierra_probe(struct usb_seria + { + int result = 0; + struct usb_device *udev; +- struct sierra_intf_private *data; ++ struct sierra_intf_private *intfdata; ++ int alternate; + u8 ifnum; + + udev = serial->dev; + dev_dbg(&udev->dev, "%s\n", __func__); + + ifnum = sierra_calc_interface(serial); ++ alternate = 0; /* go with the first */ + /* + * If this interface supports more than 1 alternate + * select the 2nd one +@@ -164,9 +252,12 @@ static int sierra_probe(struct usb_seria + if (serial->interface->num_altsetting == 2) { + dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n", + ifnum); +- /* We know the alternate setting is 1 for the MC8785 */ +- usb_set_interface(udev, ifnum, 1); ++ /* We know the alternate setting is for composite USB interface ++ * modems ++ */ ++ alternate = 1; + } ++ usb_set_interface(udev, ifnum, alternate); + + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); +@@ -178,17 +269,32 @@ static int sierra_probe(struct usb_seria + return -ENODEV; + } + +- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); +- if (!data) ++ intfdata = serial->private = kzalloc(sizeof(struct sierra_intf_private), ++ GFP_KERNEL); ++ if (!intfdata) + return -ENOMEM; +- spin_lock_init(&data->susp_lock); ++ spin_lock_init(&intfdata->susp_lock); + + return result; + } + ++/* interfaces with higher memory requirements */ ++static const u8 hi_memory_typeA_ifaces[] = { 0, 2 }; ++static const struct sierra_iface_info typeA_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeA_ifaces), ++ .ifaceinfo = hi_memory_typeA_ifaces, ++}; ++ ++static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 }; ++static const struct sierra_iface_info typeB_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeB_ifaces), ++ .ifaceinfo = hi_memory_typeB_ifaces, ++}; ++ ++/* 'blacklist' of interfaces not served by this driver */ + static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; + static const struct sierra_iface_info direct_ip_interface_blacklist = { +- .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), ++ .infolen = ARRAY_SIZE( direct_ip_non_serial_ifaces ), + .ifaceinfo = direct_ip_non_serial_ifaces, + }; + +@@ -240,7 +346,7 @@ static struct usb_device_id id_table [] + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ + { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ +- { USB_DEVICE(0x1199, 0x683C) }, ++ { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, +@@ -261,33 +367,27 @@ static struct usb_device_id id_table [] + /* Sierra Wireless HSPA Non-Composite Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, + { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ +- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ +- .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist ++ /* Sierra Wireless Direct IP modems */ ++ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF), ++ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + + { } + }; + MODULE_DEVICE_TABLE(usb, id_table); + +-static struct usb_driver sierra_driver = { +- .name = "sierra", +- .probe = usb_serial_probe, +- .disconnect = usb_serial_disconnect, +- .suspend = usb_serial_suspend, +- .resume = usb_serial_resume, +- .id_table = id_table, +- .no_dynamic_id = 1, +- .supports_autosuspend = 1, +-}; +- ++/* per port private data */ + struct sierra_port_private { + spinlock_t lock; /* lock the structure */ + int outstanding_urbs; /* number of out urbs in flight */ ++ + struct usb_anchor active; + struct usb_anchor delayed; + ++ int num_out_urbs; ++ int num_in_urbs; + /* Input endpoints and buffers for this port */ +- struct urb *in_urbs[N_IN_URB]; ++ struct urb *in_urbs[N_IN_URB_HM]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ +@@ -302,7 +402,7 @@ struct sierra_port_private { + static int sierra_send_setup(struct usb_serial_port *port) + { + struct usb_serial *serial = port->serial; +- struct sierra_port_private *portdata; ++ struct sierra_port_private *portdata = usb_get_serial_port_data(port); + __u16 interface = 0; + int val = 0; + int do_send = 0; +@@ -310,8 +410,6 @@ static int sierra_send_setup(struct usb_ + + dev_dbg(&port->dev, "%s\n", __func__); + +- portdata = usb_get_serial_port_data(port); +- + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) +@@ -404,11 +502,77 @@ static void sierra_release_urb(struct ur + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); +- kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + } + ++/* Sysfs Attributes */ ++ ++static ssize_t show_suspend_status(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata; ++ unsigned long flags; ++ unsigned int flag_suspended = 0; ++ ++ port = to_usb_serial_port(dev); ++ portdata = usb_get_serial_port_data(port); ++ intfdata = port->serial->private; ++ ++ spin_lock_irqsave(&intfdata->susp_lock, flags); ++ flag_suspended = intfdata->suspended; ++ spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ ++ return snprintf(buf, PORTION_LEN, "%i\n", flag_suspended); ++} ++ ++static ssize_t show_stats(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_intf_private *intfdata; ++ ++ port = to_usb_serial_port(dev); ++ intfdata = port->serial->private; ++ ++ return snprintf(buf, PORTION_LEN, ++ "rx: %i B\tindat: %i\tindat err: %i\n" ++ "tx: %i B\toutdat: %i\toutdat err: %i\n" ++ "writes: %i\t\twrite err: %i\n" ++ "delayed writes: %i\tdelayed write err: %i\n", ++ atomic_read(&intfdata->stats.rx_bytes), atomic_read(&intfdata->stats.indat_cb_cnt), atomic_read(&intfdata->stats.indat_cb_fail), ++ atomic_read(&intfdata->stats.tx_bytes), atomic_read(&intfdata->stats.outdat_cb_cnt), atomic_read(&intfdata->stats.outdat_cb_fail), ++ atomic_read(&intfdata->stats.write_cnt), atomic_read(&intfdata->stats.write_err), ++ atomic_read(&intfdata->stats.delayed_writes), atomic_read(&intfdata->stats.delayed_write_err) ++ ); ++} ++ ++/* Read only suspend status */ ++static DEVICE_ATTR(suspend_status, S_IWUSR | S_IRUGO, show_suspend_status, ++ NULL); ++ ++/* Read only statistics */ ++static DEVICE_ATTR(stats, S_IWUSR | S_IRUGO, show_stats, NULL); ++ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port) ++{ ++ int result = 0; ++ ++ result = device_create_file(&port->dev, &dev_attr_stats); ++ if (unlikely (result < 0)) ++ return result; ++ return device_create_file(&port->dev, &dev_attr_suspend_status); ++} ++ ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port) ++{ ++ device_remove_file(&port->dev, &dev_attr_stats); ++ device_remove_file(&port->dev, &dev_attr_suspend_status); ++ return 0; ++} ++ + static void sierra_outdat_callback(struct urb *urb) + { + struct usb_serial_port *port = urb->context; +@@ -419,16 +583,20 @@ static void sierra_outdat_callback(struc + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + intfdata = port->serial->private; + +- /* free up the transfer buffer, as usb_free_urb() does not do this */ +- kfree(urb->transfer_buffer); + usb_autopm_put_interface_async(port->serial->interface); +- if (status) ++ ++ atomic_inc(&intfdata->stats.outdat_cb_cnt); ++ ++ if (status) { + dev_dbg(&port->dev, "%s - nonzero write bulk status " + "received: %d\n", __func__, status); ++ atomic_inc(&intfdata->stats.outdat_cb_fail); ++ } + + spin_lock(&portdata->lock); + --portdata->outstanding_urbs; + spin_unlock(&portdata->lock); ++ + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); +@@ -437,8 +605,9 @@ static void sierra_outdat_callback(struc + } + + /* Write */ +-static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, +- const unsigned char *buf, int count) ++static int sierra_write(struct tty_struct *tty, ++ struct usb_serial_port *port, ++ const unsigned char *buf, int count) + { + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; +@@ -453,46 +622,49 @@ static int sierra_write(struct tty_struc + if (count == 0) + return 0; + +- portdata = usb_get_serial_port_data(port); ++ dev_dbg(&port->dev, "%s: write (%zu bytes)\n", __func__, writesize); ++ + intfdata = serial->private; + +- dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); + spin_lock_irqsave(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- if (portdata->outstanding_urbs > N_OUT_URB) { ++ if (portdata->outstanding_urbs > portdata->num_out_urbs) { + spin_unlock_irqrestore(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + portdata->outstanding_urbs++; +- dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); + spin_unlock_irqrestore(&portdata->lock, flags); + + retval = usb_autopm_get_interface_async(serial->interface); +- if (retval < 0) { ++ if (unlikely(retval < 0)) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); +- goto error_simple; ++ return retval; + } + + buffer = kmalloc(writesize, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); +- retval = -ENOMEM; +- goto error_no_buffer; ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); +- retval = -ENOMEM; +- goto error_no_urb; ++ kfree(buffer); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + +- memcpy(buffer, buf, writesize); ++ memcpy(buffer, buf, writesize); + + usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer); + +@@ -501,80 +673,91 @@ static int sierra_write(struct tty_struc + port->bulk_out_endpointAddress), + buffer, writesize, sierra_outdat_callback, port); + +- /* Handle the need to send a zero length packet */ +- urb->transfer_flags |= URB_ZERO_PACKET; ++ /* Handle the need to send a zero length packet and release the ++ * transfer buffer ++ */ ++ urb->transfer_flags |= (URB_ZERO_PACKET | URB_FREE_BUFFER); + + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); +- goto skip_power; +- } else { +- usb_anchor_urb(urb, &portdata->active); ++ /* release our reference to this urb, the USB core will ++ * eventually free it entirely */ ++ usb_free_urb(urb); ++ return writesize; + } ++ usb_anchor_urb(urb, &portdata->active); ++ + /* send it down the pipe */ + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, retval); +- goto error; ++ usb_free_urb(urb); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ atomic_inc(&intfdata->stats.write_err); ++ return retval; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ atomic_inc(&intfdata->stats.write_cnt); ++ atomic_add(writesize, &intfdata->stats.tx_bytes); + } +- +-skip_power: +- /* we are done with this urb, so let the host driver +- * really free it when it is finished with it */ +- usb_free_urb(urb); ++ /* release our reference to this urb, the USB core will eventually ++ * free it entirely */ ++ usb_free_urb(urb); + + return writesize; +-error: +- usb_free_urb(urb); +-error_no_urb: +- kfree(buffer); +-error_no_buffer: +- spin_lock_irqsave(&portdata->lock, flags); +- --portdata->outstanding_urbs; +- dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- spin_unlock_irqrestore(&portdata->lock, flags); +- usb_autopm_put_interface_async(serial->interface); +-error_simple: +- return retval; + } + + static void sierra_indat_callback(struct urb *urb) + { + int err; + int endpoint; +- struct usb_serial_port *port; ++ struct usb_serial_port *port = urb->context; + struct tty_struct *tty; ++ struct sierra_intf_private *intfdata; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; + + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + ++ intfdata = port->serial->private; ++ ++ atomic_inc(&intfdata->stats.indat_cb_cnt); /* indat calls */ ++ + if (status) { + dev_dbg(&port->dev, "%s: nonzero status: %d on" + " endpoint %02x\n", __func__, status, endpoint); ++ atomic_inc(&intfdata->stats.indat_cb_fail); /* indat fails */ + } else { + if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- +- tty_kref_put(tty); +- usb_serial_debug_data(debug, &port->dev, __func__, +- urb->actual_length, data); ++ if (tty) { ++ tty_buffer_request_room(tty, ++ urb->actual_length); ++ tty_insert_flip_string(tty, data, ++ urb->actual_length); ++ tty_flip_buffer_push(tty); ++ ++ tty_kref_put(tty); ++ /* tty invalid after this point */ ++ /* rx'd bytes */ ++ atomic_add(urb->actual_length, ++ &intfdata->stats.rx_bytes); ++ usb_serial_debug_data(debug, &port->dev, ++ __func__, urb->actual_length, data); ++ } + } else { + dev_dbg(&port->dev, "%s: empty read urb" + " received\n", __func__); +@@ -582,10 +765,11 @@ static void sierra_indat_callback(struct + } + + /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(port->serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "resubmit read urb failed." + "(%d)\n", err); + } +@@ -601,31 +785,29 @@ static void sierra_instat_callback(struc + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + +- dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__, +- urb, port, portdata); ++ dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + + if (status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + +- if (!req_pkt) { +- dev_dbg(&port->dev, "%s: NULL req_pkt\n", +- __func__); +- return; +- } +- if ((req_pkt->bRequestType == 0xA1) && +- (req_pkt->bRequest == 0x20)) { ++ const u16 *sigp = (u16 *)(req_pkt + 1); ++ /* usb_ctrlrequest we parsed is followed by two bytes of data ++ * make sure we received that many bytes ++ */ ++ if (urb->actual_length >= sizeof(*req_pkt) + sizeof(*sigp) && ++ req_pkt->bRequestType == USB_REQUEST_TYPE_CLASS && ++ req_pkt->bRequest == USB_REQUEST_IFACE) { + int old_dcd_state; +- unsigned char signals = *((unsigned char *) +- urb->transfer_buffer + +- sizeof(struct usb_ctrlrequest)); ++ const u16 signals = get_unaligned_le16(sigp); + struct tty_struct *tty; + +- dev_dbg(&port->dev, "%s: signal x%x\n", __func__, ++ dev_dbg(&port->dev, "%s: signal 0x%x\n", __func__, + signals); + + old_dcd_state = portdata->dcd_state; +- portdata->cts_state = 1; ++ /* Note: CTS from modem is in reverse logic! */ ++ portdata->cts_state = ((signals & 0x100) ? 0 : 1); + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); +@@ -636,19 +818,20 @@ static void sierra_instat_callback(struc + tty_hangup(tty); + tty_kref_put(tty); + } else { +- dev_dbg(&port->dev, "%s: type %x req %x\n", +- __func__, req_pkt->bRequestType, +- req_pkt->bRequest); ++ /* dump the data we don't understand to log */ ++ usb_serial_debug_data(1, &port->dev, __func__, ++ urb->actual_length, urb->transfer_buffer); + } + } else + dev_dbg(&port->dev, "%s: error %d\n", __func__, status); + + /* Resubmit urb so we continue receiving IRQ data */ +- if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(serial->dev); + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "%s: resubmit intr urb " + "failed. (%d)\n", __func__, err); + } +@@ -659,20 +842,21 @@ static int sierra_write_room(struct tty_ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; ++ int retval; + + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + + /* try to give a good number back based on if we have any free urbs at + * this point in time */ ++ retval = MAX_TRANSFER; ++ + spin_lock_irqsave(&portdata->lock, flags); +- if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) { +- spin_unlock_irqrestore(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - write limit hit\n", __func__); +- return 0; ++ if (portdata->outstanding_urbs >= portdata->num_out_urbs) { ++ retval = 0; + } + spin_unlock_irqrestore(&portdata->lock, flags); + +- return 2048; ++ return retval; + } + + static void sierra_stop_rx_urbs(struct usb_serial_port *port) +@@ -680,7 +864,7 @@ static void sierra_stop_rx_urbs(struct u + int i; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) ++ for (i = 0; i < portdata->num_in_urbs; i++) + usb_kill_urb(portdata->in_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); +@@ -695,10 +879,11 @@ static int sierra_submit_rx_urbs(struct + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + + ok_cnt = 0; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = portdata->in_urbs[i]; + if (!urb) + continue; ++ urb->transfer_flags |= URB_FREE_BUFFER; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", +@@ -760,41 +945,46 @@ static struct urb *sierra_setup_urb(stru + + return urb; + } +- + static void sierra_close(struct usb_serial_port *port) + { + int i; ++ struct urb *urb; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = port->serial->private; + +- + dev_dbg(&port->dev, "%s\n", __func__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + ++ usb_autopm_get_interface(serial->interface); ++ + if (serial->dev) { + mutex_lock(&serial->disc_mutex); +- if (!serial->disconnected) { +- serial->interface->needs_remote_wakeup = 0; +- usb_autopm_get_interface(serial->interface); ++ if (!serial->disconnected) + sierra_send_setup(port); +- } + mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + +- + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ +- for (i = 0; i < N_IN_URB; i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } ++ while((urb = usb_get_from_anchor(&portdata->delayed))) { ++ sierra_release_urb(urb); ++ usb_autopm_put_interface(serial->interface); ++ } ++ /* wait for active to finish */ ++ usb_wait_anchor_empty_timeout(&portdata->active, 500); ++ usb_kill_anchored_urbs(&portdata->active); ++ + } + } + +@@ -818,7 +1008,7 @@ static int sierra_open(struct tty_struct + + + endpoint = port->bulk_in_endpointAddress; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); +@@ -828,6 +1018,11 @@ static int sierra_open(struct tty_struct + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + ++ /* reset outstanding out urbs counter */ ++ spin_lock_irq(&portdata->lock); ++ portdata->outstanding_urbs = 0; ++ spin_unlock_irq(&portdata->lock); ++ + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ +@@ -838,7 +1033,6 @@ static int sierra_open(struct tty_struct + } + sierra_send_setup(port); + +- serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); +@@ -847,7 +1041,6 @@ static int sierra_open(struct tty_struct + return 0; + } + +- + static void sierra_dtr_rts(struct usb_serial_port *port, int on) + { + struct usb_serial *serial = port->serial; +@@ -867,9 +1060,13 @@ static void sierra_dtr_rts(struct usb_se + + static int sierra_startup(struct usb_serial *serial) + { +- struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct usb_serial_port *port = NULL; ++ struct sierra_port_private *portdata = NULL; ++ struct sierra_iface_info *himemoryp = NULL; + int i; ++ u8 ifnum; ++ u16 fw_attr; ++ int result; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + +@@ -880,22 +1077,80 @@ static int sierra_startup(struct usb_ser + if (nmea) + sierra_vsc_set_nmea(serial->dev, 1); + +- /* Now setup per port private data */ +- for (i = 0; i < serial->num_ports; i++) { +- port = serial->port[i]; +- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); ++ if (serial->num_ports) { ++ /* Note: One big piece of memory is allocated for all ports ++ * private data in one shot. This memory is split into equal ++ * pieces for each port. ++ */ ++ portdata = (struct sierra_port_private *)kzalloc ++ (sizeof(*portdata) * serial->num_ports, GFP_KERNEL); + if (!portdata) { +- dev_dbg(&port->dev, "%s: kmalloc for " +- "sierra_port_private (%d) failed!.\n", +- __func__, i); ++ dev_dbg(&serial->dev->dev, "%s: No memory!\n", __func__); + return -ENOMEM; + } ++ } ++ ++ /* Now setup per port private data */ ++ for (i = 0; i < serial->num_ports; i++, portdata++) { ++ port = serial->port[i]; ++ /* Initialize selected members of private data because these ++ * may be referred to right away */ + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); ++ ++ portdata->cts_state = 1; ++ ++ ifnum = i; ++ /* Assume low memory requirements */ ++ portdata->num_out_urbs = N_OUT_URB; ++ portdata->num_in_urbs = N_IN_URB; ++ ++ /* Determine actual memory requirements */ ++ if (serial->num_ports == 1) { ++ /* Get interface number for composite device */ ++ ifnum = sierra_calc_interface(serial); ++ himemoryp = ++ (struct sierra_iface_info *)&typeB_interface_list; ++ if (is_himemory(ifnum, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ else { ++ himemoryp = ++ (struct sierra_iface_info *)&typeA_interface_list; ++ if (is_himemory(i, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ dev_dbg(&serial->dev->dev, ++ "Memory usage (urbs) interface #%d, in=%d, out=%d\n", ++ ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); + /* Set the port private data pointer */ + usb_set_serial_port_data(port, portdata); + } ++ serial->interface->needs_remote_wakeup = 1; ++ usb_autopm_disable(serial->interface); ++ ++ result = sierra_get_fw_attr(serial->dev, &fw_attr); ++ if (result == sizeof(fw_attr) && (fw_attr & SWI_FW_ATTR_PM_MASK) ) { ++ dev_info(&serial->dev->dev, ++ "APM supported, enabling autosuspend.\n"); ++ usb_autopm_enable(serial->interface); ++/******************************************************************************* ++ * If you want the default /sys/bus/usb/devices/.../.../power/level to be forced ++ * to auto, the following needs to be compiled in. ++ * Other combinations may be used for other default values (see ++ * drivers/usb/core/sysfs.c function set_level. ++ */ ++#ifdef POWER_LEVEL_AUTO ++ /* make power level default be 'auto' */ ++ serial->dev->autoresume_disabled = 0; ++ serial->dev->autosuspend_disabled = 0; ++#endif ++ } + + return 0; + } +@@ -904,19 +1159,29 @@ static void sierra_release(struct usb_se + { + int i; + struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata = serial->private; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + ++ if (serial->num_ports > 0) { ++ port = serial->port[0]; ++ if (port) ++ /* Note: The entire piece of memory that was allocated ++ * in the startup routine can be released by passing ++ * a pointer to the beginning of the piece. ++ * This address corresponds to the address of the chunk ++ * that was given to port 0. ++ */ ++ kfree(usb_get_serial_port_data(port)); ++ } ++ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (!port) + continue; +- portdata = usb_get_serial_port_data(port); +- if (!portdata) +- continue; +- kfree(portdata); ++ usb_set_serial_port_data(port, NULL); + } ++ kfree(intfdata); + } + + #ifdef CONFIG_PM +@@ -938,21 +1203,21 @@ static void stop_read_write_urbs(struct + static int sierra_suspend(struct usb_serial *serial, pm_message_t message) + { + struct sierra_intf_private *intfdata; +- int b; + +- if (serial->dev->auto_pm) { +- intfdata = serial->private; +- spin_lock_irq(&intfdata->susp_lock); +- b = intfdata->in_flight; ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ ++ intfdata = serial->private; ++ spin_lock_irq(&intfdata->susp_lock); + +- if (b) { ++ if (serial->dev->auto_pm) { ++ if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; +- } else { +- intfdata->suspended = 1; +- spin_unlock_irq(&intfdata->susp_lock); + } + } ++ intfdata->suspended = 1; ++ spin_unlock_irq(&intfdata->susp_lock); ++ + stop_read_write_urbs(serial); + + return 0; +@@ -966,22 +1231,35 @@ static int sierra_resume(struct usb_seri + struct urb *urb; + int ec = 0; + int i, err; ++ int len; ++ int failed_submits; + ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); +- ++ failed_submits = 0; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; ++ len = urb->transfer_buffer_length; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + intfdata->in_flight--; + usb_unanchor_urb(urb); +- usb_scuttle_anchored_urbs(&portdata->delayed); +- break; ++ failed_submits++; ++ atomic_inc(&intfdata->stats.delayed_write_err); ++ /* fix pm_usage_cnt */ ++ usb_autopm_put_interface_async( ++ port->serial->interface); ++ } else { ++ atomic_inc(&intfdata->stats.delayed_writes); ++ atomic_add(len, &intfdata->stats.tx_bytes); + } ++ /* release urb - usb_get_from_anchor increased kref */ ++ usb_free_urb(urb); + } + + if (portdata->opened) { +@@ -989,6 +1267,14 @@ static int sierra_resume(struct usb_seri + if (err) + ec++; + } ++ if (failed_submits) { ++ /* fix outstanding_urbs counter */ ++ spin_lock(&portdata->lock); /* assuming irq disabled */ ++ portdata->outstanding_urbs -= failed_submits; ++ spin_unlock(&portdata->lock); ++ /* unblock a writer */ ++ usb_serial_port_softint(port); ++ } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); +@@ -1000,6 +1286,27 @@ static int sierra_resume(struct usb_seri + #define sierra_resume NULL + #endif + ++static int sierra_reset_resume(struct usb_interface *intf) ++{ ++ struct usb_serial *serial = usb_get_intfdata(intf); ++ dev_err(&serial->dev->dev, "%s\n", __func__); ++ return usb_serial_resume(intf); ++} ++ ++static struct usb_driver sierra_driver = { ++ .name = "sierra", ++ .probe = usb_serial_probe, ++ .disconnect = usb_serial_disconnect, ++ .suspend = usb_serial_suspend, ++ .resume = usb_serial_resume, ++ .reset_resume = sierra_reset_resume, ++ .id_table = id_table, ++ ++ .no_dynamic_id = 1, ++ .supports_autosuspend = 1, ++}; ++ ++ + static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, +@@ -1020,9 +1327,12 @@ static struct usb_serial_driver sierra_d + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .release = sierra_release, +- .suspend = sierra_suspend, +- .resume = sierra_resume, ++ .port_probe = sierra_create_sysfs_attrs, ++ .port_remove = sierra_remove_sysfs_attrs, ++ .suspend = sierra_suspend, ++ .resume = sierra_resume, + .read_int_callback = sierra_instat_callback, ++ + }; + + /* Functions used by new usb-serial code. */ +@@ -1033,7 +1343,6 @@ static int __init sierra_init(void) + if (retval) + goto failed_device_register; + +- + retval = usb_register(&sierra_driver); + if (retval) + goto failed_driver_register; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/defconfig b/multitech/recipes/linux/linux-2.6.32/mtcdp/defconfig new file mode 100644 index 0000000..926d006 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/defconfig @@ -0,0 +1,1644 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32.3 +# Tue Oct 12 09:57:09 2010 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_AT91SAM9G10 is not set +# CONFIG_ARCH_AT91SAM9263 is not set +# CONFIG_ARCH_AT91SAM9RL is not set +CONFIG_ARCH_AT91SAM9G20=y +# CONFIG_ARCH_AT91SAM9G45 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y + +# +# AT91SAM9G20 Board Type +# +CONFIG_MACH_AT91SAM9G20EK=y +# CONFIG_MACH_AT91SAM9G20EK_2MMC is not set +# CONFIG_MACH_CPU9G20 is not set + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_SLOW_CLOCK=y +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" quiet " +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_H323=y +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=y +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_CONNMARK=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_HL=y +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=y +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=y +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_ADDRTYPE=y +# CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=y +CONFIG_IP_NF_MATCH_TTL=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_NETMAP=y +CONFIG_IP_NF_TARGET_REDIRECT=y +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_FTP=y +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +CONFIG_NF_NAT_H323=y +# CONFIG_NF_NAT_SIP is not set +CONFIG_IP_NF_MANGLE=y +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=m +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=y +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=m +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at25.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at25.patch new file mode 100644 index 0000000..3aa9096 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at25.patch @@ -0,0 +1,37 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c linux-2.6.32.3/drivers/misc/eeprom/at25.c +--- linux-2.6.32.3-vanilla/drivers/misc/eeprom/at25.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/misc/eeprom/at25.c 2010-10-27 11:05:36.000000000 -0500 +@@ -147,6 +147,7 @@ at25_ee_write(struct at25_data *at25, co + unsigned written = 0; + unsigned buf_size; + u8 *bounce; ++ int a8; + + if (unlikely(off >= at25->bin.size)) + return -EFBIG; +@@ -163,6 +164,11 @@ at25_ee_write(struct at25_data *at25, co + if (!bounce) + return -ENOMEM; + ++ if (!strcmp(at25->chip.name, "at25040b")) ++ a8 = 1; ++ else ++ a8 = 0; ++ + /* For write, rollover is within the page ... so we write at + * most one page, then manually roll over to the next page. + */ +@@ -183,6 +189,13 @@ at25_ee_write(struct at25_data *at25, co + break; + } + ++ if (a8) { ++ if (offset & BIT(8)) ++ bounce[0] |= BIT(3); ++ else ++ bounce[0] &= ~BIT(3); ++ } ++ + /* 8/16/24-bit address is written MSB first */ + switch (at25->addrlen) { + default: /* case 3 */ diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at91_mci.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at91_mci.patch new file mode 100644 index 0000000..820ce7f --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-at91_mci.patch @@ -0,0 +1,39 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c linux-2.6.32.3/drivers/mmc/host/at91_mci.c +--- linux-2.6.32.3-vanilla/drivers/mmc/host/at91_mci.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mmc/host/at91_mci.c 2010-10-11 10:16:06.000000000 -0500 +@@ -201,7 +201,7 @@ static inline void at91_mci_sg_to_dma(st + len = data->sg_len; + + /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + +@@ -461,7 +461,7 @@ static void at91_mci_enable(struct at91m + at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); + mr = AT91_MCI_PDCMODE | 0x34a; + +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; + + at91_mci_write(host, AT91_MCI_MR, mr); +@@ -617,7 +617,7 @@ static void at91_mci_send_command(struct + * AT91SAM926[0/3] Data Write Operation and + * number of bytes erratum + */ +- if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260 () || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + if (host->total_length < 12) + host->total_length = 12; + +@@ -1017,7 +1017,7 @@ static int __init at91_mci_probe(struct + host->bus_mode = 0; + host->board = pdev->dev.platform_data; + if (host->board->wire4) { +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) ++ if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) + mmc->caps |= MMC_CAP_4_BIT_DATA; + else + dev_warn(&pdev->dev, "4 wire bus mode not supported" diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_serial_disable_hwhs.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_serial_disable_hwhs.patch new file mode 100644 index 0000000..bd620af --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_serial_disable_hwhs.patch @@ -0,0 +1,32 @@ +Revert commit 8e706c4d0dab214c625a2df84a0ca69a76bae65d in linux-2.6: + avr32: add hardware handshake support to atmel_serial + +Reverting commit since it breaks hardware flow control for at91sam9g20 + +diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c +index 9d948bc..b659f2c 100644 +--- a/drivers/serial/atmel_serial.c ++++ b/drivers/serial/atmel_serial.c +@@ -1020,8 +1020,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + + /* Get current mode register */ + mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL +- | ATMEL_US_NBSTOP | ATMEL_US_PAR +- | ATMEL_US_USMODE); ++ | ATMEL_US_NBSTOP | ATMEL_US_PAR); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + quot = uart_get_divisor(port, baud); +@@ -1066,12 +1065,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, + } else + mode |= ATMEL_US_PAR_NONE; + +- /* hardware handshake (RTS/CTS) */ +- if (termios->c_cflag & CRTSCTS) +- mode |= ATMEL_US_USMODE_HWHS; +- else +- mode |= ATMEL_US_USMODE_NORMAL; +- + spin_lock_irqsave(&port->lock, flags); + + port->read_status_mask = ATMEL_US_OVRE; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_spi.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_spi.patch new file mode 100644 index 0000000..a7b87b3 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-atmel_spi.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c linux-2.6.32.3/drivers/spi/atmel_spi.c +--- linux-2.6.32.3-vanilla/drivers/spi/atmel_spi.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/spi/atmel_spi.c 2010-09-08 13:38:52.000000000 -0500 +@@ -768,7 +768,7 @@ static int __init atmel_spi_probe(struct + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + + master->bus_num = pdev->id; +- master->num_chipselect = 4; ++ master->num_chipselect = 7; + master->setup = atmel_spi_setup; + master->transfer = atmel_spi_transfer; + master->cleanup = atmel_spi_cleanup; diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-m25p80.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-m25p80.patch new file mode 100644 index 0000000..71d3a92 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-m25p80.patch @@ -0,0 +1,12 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c linux-2.6.32.3/drivers/mtd/devices/m25p80.c +--- linux-2.6.32.3-vanilla/drivers/mtd/devices/m25p80.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/mtd/devices/m25p80.c 2010-10-14 11:36:06.000000000 -0500 +@@ -780,7 +780,7 @@ static int __devinit m25p_probe(struct s + * with the software protection bits set + */ + +- if (info->jedec_id >> 16 == 0x1f) { ++ if (info->jedec_id >> 16 == 0x1f || info->jedec_id == 0xbf258e) { + write_enable(flash); + write_sr(flash, 0); + } diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-mach-at91.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-mach-at91.patch new file mode 100644 index 0000000..a4bcac8 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-mach-at91.patch @@ -0,0 +1,363 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/at91sam9260_devices.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/at91sam9260_devices.c 2010-10-11 10:15:08.000000000 -0500 +@@ -183,9 +183,9 @@ void __init at91_add_device_eth(struct a + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ +- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ +- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ +- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++ /*at91_set_B_periph(AT91_PIN_PA22, 0);*/ /* ETXER */ + } + + eth_data = *data; +@@ -571,7 +571,15 @@ static struct platform_device at91sam926 + .num_resources = ARRAY_SIZE(spi1_resources), + }; + +-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++static const unsigned spi1_standard_cs[7] = { ++ AT91_PIN_PB3, ++ AT91_PIN_PC5, ++ AT91_PIN_PC4, ++ AT91_PIN_PC6, ++ AT91_PIN_PB12, ++ AT91_PIN_PB13, ++ AT91_PIN_PB16 ++}; + + void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) + { +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c +--- linux-2.6.32.3-vanilla/arch/arm/mach-at91/board-sam9g20ek.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/arch/arm/mach-at91/board-sam9g20ek.c 2010-10-14 16:16:52.000000000 -0500 +@@ -27,6 +27,11 @@ + #include <linux/gpio_keys.h> + #include <linux/input.h> + #include <linux/clk.h> ++#include <linux/i2c/at24.h> ++#include <linux/spi/eeprom.h> ++#include <linux/spi/flash.h> ++#include <linux/delay.h> ++#include <mach/at91_rtt.h> + + #include <mach/hardware.h> + #include <asm/setup.h> +@@ -44,9 +49,12 @@ + #include "sam9_smc.h" + #include "generic.h" + ++static int i2c_present; + + static void __init ek_map_io(void) + { ++ int tmp; ++ + /* Initialize processor: 18.432 MHz crystal */ + at91sam9260_initialize(18432000); + +@@ -61,12 +69,55 @@ static void __init ek_map_io(void) + /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */ + at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS); + ++ /* ++ * Reset any initiated i2c data transfers? ++ */ ++ at91_set_gpio_input(AT91_PIN_PA23, 0); ++ at91_set_gpio_output(AT91_PIN_PA24, 0); ++ for (tmp = 0; tmp < 11; tmp++) { ++ at91_set_gpio_value(AT91_PIN_PA24, 0); ++ udelay(20); ++ at91_set_gpio_value(AT91_PIN_PA24, 1); ++ udelay(20); ++ } ++ at91_set_gpio_input(AT91_PIN_PA24, 0); ++ ++ /* ++ * PA24 and PA23 are used as ID pins on MTCBA/MTCDP-0.0 and I2C pins on MTCDP-1.0. ++ * ++ * MTCBA Rev. B: 0x01, C: 0x02, D: 0x03 ++ * MTCDP Rev. A reads as 0x00 with TWCK and TWD pulled high ++ * ++ */ ++ tmp = !at91_get_gpio_value(AT91_PIN_PA24) << 1 | !at91_get_gpio_value(AT91_PIN_PA23); ++ ++ i2c_present = !tmp; ++ ++ /* ++ * The GPS receiver is either at US2 on MTCBA/MTCDP-0.0 and US3 on MTCDP-1.0. ++ */ ++ if (i2c_present) { ++ at91_register_uart(AT91SAM9260_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS); ++ printk(KERN_INFO "sam9g20: i2c available\n"); ++ } else { ++ at91_register_uart(AT91SAM9260_ID_US2, 3, 0); ++ printk(KERN_INFO "sam9g20: i2c not available\n"); ++ } ++ + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); + } + + static void __init ek_init_irq(void) + { ++ /* ++ * Ensure RTT interrupts are disabled ++ */ ++ u32 mr; ++ mr = __raw_readl(AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ __raw_writel(mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN), ++ AT91_VA_BASE_SYS + AT91_RTT + AT91_RTT_MR); ++ + at91sam9260_init_interrupts(NULL); + } + +@@ -82,11 +133,38 @@ static struct at91_usbh_data __initdata + * USB Device port + */ + static struct at91_udc_data __initdata ek_udc_data = { +- .vbus_pin = AT91_PIN_PC5, +- .pullup_pin = 0, /* pull-up driven by UDC */ ++ .vbus_pin = AT91_PIN_PC12, ++ .pullup_pin = 0, /* pull-up driven by UDC */ + }; + + ++#define MTS_EXT_AT25_TEST 0 ++#if MTS_EXT_AT25_TEST ++static struct spi_eeprom at25040b = { ++ .byte_len = SZ_4K / 8, ++ .name = "at25040b", ++ .page_size = 8, ++ .flags = EE_ADDR1, ++}; ++#endif ++ ++#define MTS_EXT_STT25_TEST 0 ++#if MTS_EXT_STT25_TEST ++static struct mtd_partition m25_partitions[] = { ++ { ++ .name = "flash", ++ .offset = 0x00000000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct flash_platform_data m25_spi_flash_data = { ++ .type = "sst25vf080b", ++ .nr_parts = ARRAY_SIZE(m25_partitions), ++ .parts = m25_partitions, ++}; ++#endif ++ + /* + * SPI devices. + */ +@@ -107,6 +185,54 @@ static struct spi_board_info ek_spi_devi + }, + #endif + #endif ++ { ++ .modalias = "mts-io-sout", ++ .chip_select = 0, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-board-temp", ++ .chip_select = 2, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-dout", ++ .chip_select = 1, ++ .bus_num = 1, ++ }, ++ { ++ .modalias = "mts-io-din", ++ .chip_select = 4, ++ .bus_num = 1, ++ }, ++#if MTS_EXT_AT25_TEST ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ .mode = SPI_MODE_0, ++ }, ++ { ++ .modalias = "at25", ++ .platform_data = &at25040b, ++ .max_speed_hz = 20 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 6, ++ .mode = SPI_MODE_0, ++ }, ++#endif ++#if MTS_EXT_STT25_TEST ++ { ++ .modalias = "m25p80", ++ .platform_data = &m25_spi_flash_data, ++ .irq = NO_IRQ, ++ .max_speed_hz = 33 * 1000 * 1000, ++ .bus_num = 1, ++ .chip_select = 5, ++ }, ++#endif + }; + + +@@ -115,7 +241,7 @@ static struct spi_board_info ek_spi_devi + */ + static struct at91_eth_data __initdata ek_macb_data = { + .phy_irq_pin = AT91_PIN_PA7, +- .is_rmii = 1, ++ .is_rmii = 0, + }; + + +@@ -124,18 +250,48 @@ static struct at91_eth_data __initdata e + */ + static struct mtd_partition __initdata ek_nand_partition[] = { + { +- .name = "Bootstrap", +- .offset = 0, +- .size = 4 * SZ_1M, ++ .name = "MTNCG-NANDFlash", ++ .offset = 0, ++ .size = 256*1024*1024, ++ }, ++ { ++ .name = "AT91Bootstrap", ++ .offset = 0, ++ .size = 128*1024, + }, + { +- .name = "Partition 1", +- .offset = MTDPART_OFS_NXTBLK, +- .size = 60 * SZ_1M, ++ .name = "UBoot", ++ .offset = 128*1024, ++ .size = 256*1024, + }, + { +- .name = "Partition 2", +- .offset = MTDPART_OFS_NXTBLK, ++ .name = "UBoot Config", ++ .offset = 384*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "UBoot Redundant Config", ++ .offset = 512*1024, ++ .size = 128*1024, ++ }, ++ { ++ .name = "uImage", ++ .offset = 640*1024, ++ .size = 59*128*1024, ++ }, ++ { ++ .name = "Config", ++ .offset = 64*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Oem Config", ++ .offset = 128*128*1024, ++ .size = 64*128*1024, ++ }, ++ { ++ .name = "Rootfs", ++ .offset = 192*128*1024, + .size = MTDPART_SIZ_FULL, + }, + }; +@@ -195,11 +351,13 @@ static void __init ek_add_device_nand(vo + + /* + * MCI (SD/MMC) +- * det_pin, wp_pin and vcc_pin are not connected ++ * vcc_pin is not connected + */ + static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, + .wire4 = 1, ++ .det_pin = AT91_PIN_PA6, ++ .wp_pin = AT91_PIN_PA9, + }; + + +@@ -207,15 +365,10 @@ static struct at91_mmc_data __initdata e + * LEDs + */ + static struct gpio_led ek_leds[] = { +- { /* "bottom" led, green, userled1 to be defined */ +- .name = "ds5", +- .gpio = AT91_PIN_PA6, ++ { /* "status" led, green */ ++ .name = "status", ++ .gpio = AT91_PIN_PA30, + .active_low = 1, +- .default_trigger = "none", +- }, +- { /* "power" led, yellow */ +- .name = "ds1", +- .gpio = AT91_PIN_PA9, + .default_trigger = "heartbeat", + } + }; +@@ -269,15 +422,37 @@ static void __init ek_add_device_buttons + static void __init ek_add_device_buttons(void) {} + #endif + ++uint8_t mts_id_eeprom[512]; ++ ++EXPORT_SYMBOL(mts_id_eeprom); ++ ++static void mts_id_eeprom_load(struct memory_accessor *macc, void *context) ++{ ++ int tmp; ++ ++ memset(mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ ++ tmp = macc->read(macc, mts_id_eeprom, 0, sizeof(mts_id_eeprom)); ++ if (tmp != sizeof(mts_id_eeprom)) { ++ printk(KERN_ERR "sam9g20: id eeprom read failed: %d\n", tmp); ++ } else { ++ printk(KERN_INFO "sam9g20: read %d bytes from id eeprom\n", tmp); ++ } ++} ++ ++static struct at24_platform_data at24c04_data = { ++ .byte_len = SZ_4K / 8, ++ .page_size = 16, ++ .setup = mts_id_eeprom_load, ++}; + + static struct i2c_board_info __initdata ek_i2c_devices[] = { + { +- I2C_BOARD_INFO("24c512", 0x50), +- I2C_BOARD_INFO("wm8731", 0x1b), ++ I2C_BOARD_INFO("24c04", 0x56), ++ .platform_data = &at24c04_data, + }, + }; + +- + static void __init ek_board_init(void) + { + /* Serial */ +@@ -303,7 +478,7 @@ static void __init ek_board_init(void) + /* PCK0 provides MCLK to the WM8731 */ + at91_set_B_periph(AT91_PIN_PC1, 0); + /* SSC (for WM8731) */ +- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); ++ /* at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX); */ + } + + MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-option.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-option.patch new file mode 100644 index 0000000..c778e53 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-option.patch @@ -0,0 +1,71 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/option.c linux-2.6.32.3/drivers/usb/serial/option.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/option.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/option.c 2010-09-02 13:24:59.000000000 -0500 +@@ -913,33 +913,46 @@ static void option_indat_callback(struct + dbg("%s: %p", __func__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; ++ port = urb->context; + +- if (status) { ++ switch (status) { ++ case 0: ++ /* success */ ++ break; ++ case -ECONNRESET: ++ case -ENOENT: ++ case -ESHUTDOWN: ++ /* this urb is terminated, clean up */ ++ dbg("%s: urb shutting down with status: %d on endpoint %02x.", ++ __func__, status, endpoint); ++ return; ++ default: + dbg("%s: nonzero status: %d on endpoint %02x.", +- __func__, status, endpoint); +- } else { ++ __func__, status, endpoint); ++ goto exit; ++ } ++ ++ usb_serial_debug_data(debug, &port->dev, __func__, ++ urb->actual_length, data); ++ ++ if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- if (urb->actual_length) { +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- } else +- dbg("%s: empty read urb received", __func__); +- tty_kref_put(tty); + +- /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN) { +- err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) +- printk(KERN_ERR "%s: resubmit read urb failed. " +- "(%d)", __func__, err); +- else +- usb_mark_last_busy(port->serial->dev); +- } ++ tty_buffer_request_room(tty, urb->actual_length); ++ tty_insert_flip_string(tty, data, urb->actual_length); ++ tty_flip_buffer_push(tty); + ++ tty_kref_put(tty); + } +- return; ++ ++exit: ++ /* Resubmit urb so we continue receiving */ ++ err = usb_submit_urb(urb, GFP_ATOMIC); ++ if (err && err != -EPERM) ++ printk(KERN_ERR "%s: resubmit read urb failed. " ++ "(%d)", __func__, err); ++ else ++ usb_mark_last_busy(port->serial->dev); + } + + static void option_outdat_callback(struct urb *urb) diff --git a/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-sierra.patch b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-sierra.patch new file mode 100644 index 0000000..2b90930 --- /dev/null +++ b/multitech/recipes/linux/linux-2.6.32/mtcdp/linux-2.6.32.3-sierra.patch @@ -0,0 +1,1109 @@ +diff -uprN -X linux-2.6.32.3/Documentation/dontdiff linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c linux-2.6.32.3/drivers/usb/serial/sierra.c +--- linux-2.6.32.3-vanilla/drivers/usb/serial/sierra.c 2010-01-06 17:07:45.000000000 -0600 ++++ linux-2.6.32.3/drivers/usb/serial/sierra.c 2010-09-02 11:29:36.000000000 -0500 +@@ -16,8 +16,13 @@ + Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> + Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> + */ ++/* Uncomment to log function calls */ ++/* #define DEBUG */ ++/* Uncomment to force power level set to auto when attaching a device */ ++/* #define POWER_LEVEL_AUTO */ + +-#define DRIVER_VERSION "v.1.3.8" ++/* Sierra driver - kernel 2.6.32 */ ++#define DRIVER_VERSION "v.1.7.30" + #define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" + #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" + +@@ -29,12 +34,18 @@ + #include <linux/module.h> + #include <linux/usb.h> + #include <linux/usb/serial.h> ++#include <asm/unaligned.h> + + #define SWIMS_USB_REQUEST_SetPower 0x00 ++#define SWIMS_USB_REQUEST_GetFwAttr 0x06 + #define SWIMS_USB_REQUEST_SetNmea 0x07 ++#define USB_REQUEST_TYPE_CLASS 0xA1 ++#define USB_REQUEST_IFACE 0x20 + +-#define N_IN_URB 8 +-#define N_OUT_URB 64 ++#define N_IN_URB_HM 8 ++#define N_OUT_URB_HM 64 ++#define N_IN_URB 4 ++#define N_OUT_URB 4 + #define IN_BUFLEN 4096 + + #define MAX_TRANSFER (PAGE_SIZE - 512) +@@ -42,19 +53,47 @@ + allocations > PAGE_SIZE and the number of packets in a page + is an integer 512 is the largest possible packet on EHCI */ + ++#define SWI_FW_ATTR_PM_MASK 0x02 ++/* PORTION_LEN defines the length of device attribute buffer */ ++#define PORTION_LEN 4096 ++ + static int debug; + static int nmea; + ++/* sysfs attributes */ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port); ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port); ++ + /* Used in interface blacklisting */ + struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ + }; + ++/* per interface statistics */ ++struct sierra_intf_stats { ++ atomic_t rx_bytes; /* received bytes */ ++ atomic_t indat_cb_cnt; /* indat callback count */ ++ atomic_t indat_cb_fail; /* indat cb with error */ ++ ++ atomic_t tx_bytes; /* transmitted bytes */ ++ atomic_t write_cnt; /* no. of writes */ ++ atomic_t write_err; /* no. of failed writes */ ++ ++ atomic_t delayed_writes; /* no. of delayed writes */ ++ atomic_t delayed_write_err; /* no. of delayed write errs */ ++ ++ atomic_t outdat_cb_cnt; /* outdat callback count */ ++ atomic_t outdat_cb_fail; /* outdat cb with error */ ++ ++}; ++ + struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; ++ ++ struct sierra_intf_stats stats; + }; + + static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) +@@ -87,6 +126,38 @@ static int sierra_vsc_set_nmea(struct us + return result; + } + ++static int sierra_get_fw_attr(struct usb_device *udev, u16 *data) ++{ ++ int result; ++ u16 *attrdata; ++ ++ dev_dbg(&udev->dev, "%s\n", __func__); ++ ++ attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL); ++ if (!attrdata) ++ return -ENOMEM; ++ ++ result = usb_control_msg(udev, ++ usb_rcvctrlpipe(udev, 0), ++ SWIMS_USB_REQUEST_GetFwAttr, /* __u8 request*/ ++ USB_TYPE_VENDOR | USB_DIR_IN, /* request type*/ ++ 0x0000, /* __u16 value */ ++ 0x0000, /* __u16 index */ ++ attrdata, /* void *data */ ++ sizeof(*attrdata), /* _u16 size */ ++ USB_CTRL_SET_TIMEOUT); /* in timeout */ ++ ++ if (result < 0) { ++ kfree(attrdata); ++ return -EIO; ++ } ++ ++ *data = *attrdata; ++ ++ kfree(attrdata); ++ return result; ++} ++ + static int sierra_calc_num_ports(struct usb_serial *serial) + { + int num_ports = 0; +@@ -124,12 +195,28 @@ static int is_blacklisted(const u8 ifnum + return 0; + } + ++static int is_himemory(const u8 ifnum, ++ const struct sierra_iface_info *himemorylist) ++{ ++ const u8 *info; ++ int i; ++ ++ if (himemorylist) { ++ info = himemorylist->ifaceinfo; ++ ++ for (i=0; i < himemorylist->infolen; i++) { ++ if (info[i] == ifnum) ++ return 1; ++ } ++ } ++ return 0; ++} ++ + static int sierra_calc_interface(struct usb_serial *serial) + { + int interface; + struct usb_interface *p_interface; + struct usb_host_interface *p_host_interface; +- dev_dbg(&serial->dev->dev, "%s\n", __func__); + + /* Get the interface structure pointer from the serial struct */ + p_interface = serial->interface; +@@ -138,8 +225,7 @@ static int sierra_calc_interface(struct + p_host_interface = p_interface->cur_altsetting; + + /* read the interface descriptor for this active altsetting +- * to find out the interface number we are on +- */ ++ * to find out the interface number we are on */ + interface = p_host_interface->desc.bInterfaceNumber; + + return interface; +@@ -150,13 +236,15 @@ static int sierra_probe(struct usb_seria + { + int result = 0; + struct usb_device *udev; +- struct sierra_intf_private *data; ++ struct sierra_intf_private *intfdata; ++ int alternate; + u8 ifnum; + + udev = serial->dev; + dev_dbg(&udev->dev, "%s\n", __func__); + + ifnum = sierra_calc_interface(serial); ++ alternate = 0; /* go with the first */ + /* + * If this interface supports more than 1 alternate + * select the 2nd one +@@ -164,9 +252,12 @@ static int sierra_probe(struct usb_seria + if (serial->interface->num_altsetting == 2) { + dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n", + ifnum); +- /* We know the alternate setting is 1 for the MC8785 */ +- usb_set_interface(udev, ifnum, 1); ++ /* We know the alternate setting is for composite USB interface ++ * modems ++ */ ++ alternate = 1; + } ++ usb_set_interface(udev, ifnum, alternate); + + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); +@@ -178,17 +269,32 @@ static int sierra_probe(struct usb_seria + return -ENODEV; + } + +- data = serial->private = kzalloc(sizeof(struct sierra_intf_private), GFP_KERNEL); +- if (!data) ++ intfdata = serial->private = kzalloc(sizeof(struct sierra_intf_private), ++ GFP_KERNEL); ++ if (!intfdata) + return -ENOMEM; +- spin_lock_init(&data->susp_lock); ++ spin_lock_init(&intfdata->susp_lock); + + return result; + } + ++/* interfaces with higher memory requirements */ ++static const u8 hi_memory_typeA_ifaces[] = { 0, 2 }; ++static const struct sierra_iface_info typeA_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeA_ifaces), ++ .ifaceinfo = hi_memory_typeA_ifaces, ++}; ++ ++static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 }; ++static const struct sierra_iface_info typeB_interface_list = { ++ .infolen = ARRAY_SIZE(hi_memory_typeB_ifaces), ++ .ifaceinfo = hi_memory_typeB_ifaces, ++}; ++ ++/* 'blacklist' of interfaces not served by this driver */ + static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11 }; + static const struct sierra_iface_info direct_ip_interface_blacklist = { +- .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), ++ .infolen = ARRAY_SIZE( direct_ip_non_serial_ifaces ), + .ifaceinfo = direct_ip_non_serial_ifaces, + }; + +@@ -240,7 +346,7 @@ static struct usb_device_id id_table [] + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ + { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ +- { USB_DEVICE(0x1199, 0x683C) }, ++ { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, +@@ -261,33 +367,27 @@ static struct usb_device_id id_table [] + /* Sierra Wireless HSPA Non-Composite Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, + { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ +- { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ +- .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist ++ /* Sierra Wireless Direct IP modems */ ++ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF), ++ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + + { } + }; + MODULE_DEVICE_TABLE(usb, id_table); + +-static struct usb_driver sierra_driver = { +- .name = "sierra", +- .probe = usb_serial_probe, +- .disconnect = usb_serial_disconnect, +- .suspend = usb_serial_suspend, +- .resume = usb_serial_resume, +- .id_table = id_table, +- .no_dynamic_id = 1, +- .supports_autosuspend = 1, +-}; +- ++/* per port private data */ + struct sierra_port_private { + spinlock_t lock; /* lock the structure */ + int outstanding_urbs; /* number of out urbs in flight */ ++ + struct usb_anchor active; + struct usb_anchor delayed; + ++ int num_out_urbs; ++ int num_in_urbs; + /* Input endpoints and buffers for this port */ +- struct urb *in_urbs[N_IN_URB]; ++ struct urb *in_urbs[N_IN_URB_HM]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ +@@ -302,7 +402,7 @@ struct sierra_port_private { + static int sierra_send_setup(struct usb_serial_port *port) + { + struct usb_serial *serial = port->serial; +- struct sierra_port_private *portdata; ++ struct sierra_port_private *portdata = usb_get_serial_port_data(port); + __u16 interface = 0; + int val = 0; + int do_send = 0; +@@ -310,8 +410,6 @@ static int sierra_send_setup(struct usb_ + + dev_dbg(&port->dev, "%s\n", __func__); + +- portdata = usb_get_serial_port_data(port); +- + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) +@@ -404,11 +502,77 @@ static void sierra_release_urb(struct ur + if (urb) { + port = urb->context; + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); +- kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + } + ++/* Sysfs Attributes */ ++ ++static ssize_t show_suspend_status(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata; ++ unsigned long flags; ++ unsigned int flag_suspended = 0; ++ ++ port = to_usb_serial_port(dev); ++ portdata = usb_get_serial_port_data(port); ++ intfdata = port->serial->private; ++ ++ spin_lock_irqsave(&intfdata->susp_lock, flags); ++ flag_suspended = intfdata->suspended; ++ spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ ++ return snprintf(buf, PORTION_LEN, "%i\n", flag_suspended); ++} ++ ++static ssize_t show_stats(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct usb_serial_port *port; ++ struct sierra_intf_private *intfdata; ++ ++ port = to_usb_serial_port(dev); ++ intfdata = port->serial->private; ++ ++ return snprintf(buf, PORTION_LEN, ++ "rx: %i B\tindat: %i\tindat err: %i\n" ++ "tx: %i B\toutdat: %i\toutdat err: %i\n" ++ "writes: %i\t\twrite err: %i\n" ++ "delayed writes: %i\tdelayed write err: %i\n", ++ atomic_read(&intfdata->stats.rx_bytes), atomic_read(&intfdata->stats.indat_cb_cnt), atomic_read(&intfdata->stats.indat_cb_fail), ++ atomic_read(&intfdata->stats.tx_bytes), atomic_read(&intfdata->stats.outdat_cb_cnt), atomic_read(&intfdata->stats.outdat_cb_fail), ++ atomic_read(&intfdata->stats.write_cnt), atomic_read(&intfdata->stats.write_err), ++ atomic_read(&intfdata->stats.delayed_writes), atomic_read(&intfdata->stats.delayed_write_err) ++ ); ++} ++ ++/* Read only suspend status */ ++static DEVICE_ATTR(suspend_status, S_IWUSR | S_IRUGO, show_suspend_status, ++ NULL); ++ ++/* Read only statistics */ ++static DEVICE_ATTR(stats, S_IWUSR | S_IRUGO, show_stats, NULL); ++ ++static int sierra_create_sysfs_attrs(struct usb_serial_port *port) ++{ ++ int result = 0; ++ ++ result = device_create_file(&port->dev, &dev_attr_stats); ++ if (unlikely (result < 0)) ++ return result; ++ return device_create_file(&port->dev, &dev_attr_suspend_status); ++} ++ ++static int sierra_remove_sysfs_attrs(struct usb_serial_port *port) ++{ ++ device_remove_file(&port->dev, &dev_attr_stats); ++ device_remove_file(&port->dev, &dev_attr_suspend_status); ++ return 0; ++} ++ + static void sierra_outdat_callback(struct urb *urb) + { + struct usb_serial_port *port = urb->context; +@@ -419,16 +583,20 @@ static void sierra_outdat_callback(struc + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + intfdata = port->serial->private; + +- /* free up the transfer buffer, as usb_free_urb() does not do this */ +- kfree(urb->transfer_buffer); + usb_autopm_put_interface_async(port->serial->interface); +- if (status) ++ ++ atomic_inc(&intfdata->stats.outdat_cb_cnt); ++ ++ if (status) { + dev_dbg(&port->dev, "%s - nonzero write bulk status " + "received: %d\n", __func__, status); ++ atomic_inc(&intfdata->stats.outdat_cb_fail); ++ } + + spin_lock(&portdata->lock); + --portdata->outstanding_urbs; + spin_unlock(&portdata->lock); ++ + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); +@@ -437,8 +605,9 @@ static void sierra_outdat_callback(struc + } + + /* Write */ +-static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, +- const unsigned char *buf, int count) ++static int sierra_write(struct tty_struct *tty, ++ struct usb_serial_port *port, ++ const unsigned char *buf, int count) + { + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; +@@ -453,46 +622,49 @@ static int sierra_write(struct tty_struc + if (count == 0) + return 0; + +- portdata = usb_get_serial_port_data(port); ++ dev_dbg(&port->dev, "%s: write (%zu bytes)\n", __func__, writesize); ++ + intfdata = serial->private; + +- dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); + spin_lock_irqsave(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- if (portdata->outstanding_urbs > N_OUT_URB) { ++ if (portdata->outstanding_urbs > portdata->num_out_urbs) { + spin_unlock_irqrestore(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + portdata->outstanding_urbs++; +- dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); + spin_unlock_irqrestore(&portdata->lock, flags); + + retval = usb_autopm_get_interface_async(serial->interface); +- if (retval < 0) { ++ if (unlikely(retval < 0)) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); +- goto error_simple; ++ return retval; + } + + buffer = kmalloc(writesize, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); +- retval = -ENOMEM; +- goto error_no_buffer; ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); +- retval = -ENOMEM; +- goto error_no_urb; ++ kfree(buffer); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ return -ENOMEM; + } + +- memcpy(buffer, buf, writesize); ++ memcpy(buffer, buf, writesize); + + usb_serial_debug_data(debug, &port->dev, __func__, writesize, buffer); + +@@ -501,80 +673,91 @@ static int sierra_write(struct tty_struc + port->bulk_out_endpointAddress), + buffer, writesize, sierra_outdat_callback, port); + +- /* Handle the need to send a zero length packet */ +- urb->transfer_flags |= URB_ZERO_PACKET; ++ /* Handle the need to send a zero length packet and release the ++ * transfer buffer ++ */ ++ urb->transfer_flags |= (URB_ZERO_PACKET | URB_FREE_BUFFER); + + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); +- goto skip_power; +- } else { +- usb_anchor_urb(urb, &portdata->active); ++ /* release our reference to this urb, the USB core will ++ * eventually free it entirely */ ++ usb_free_urb(urb); ++ return writesize; + } ++ usb_anchor_urb(urb, &portdata->active); ++ + /* send it down the pipe */ + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, retval); +- goto error; ++ usb_free_urb(urb); ++ spin_lock_irqsave(&portdata->lock, flags); ++ --portdata->outstanding_urbs; ++ spin_unlock_irqrestore(&portdata->lock, flags); ++ usb_autopm_put_interface_async(serial->interface); ++ atomic_inc(&intfdata->stats.write_err); ++ return retval; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); ++ atomic_inc(&intfdata->stats.write_cnt); ++ atomic_add(writesize, &intfdata->stats.tx_bytes); + } +- +-skip_power: +- /* we are done with this urb, so let the host driver +- * really free it when it is finished with it */ +- usb_free_urb(urb); ++ /* release our reference to this urb, the USB core will eventually ++ * free it entirely */ ++ usb_free_urb(urb); + + return writesize; +-error: +- usb_free_urb(urb); +-error_no_urb: +- kfree(buffer); +-error_no_buffer: +- spin_lock_irqsave(&portdata->lock, flags); +- --portdata->outstanding_urbs; +- dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, +- portdata->outstanding_urbs); +- spin_unlock_irqrestore(&portdata->lock, flags); +- usb_autopm_put_interface_async(serial->interface); +-error_simple: +- return retval; + } + + static void sierra_indat_callback(struct urb *urb) + { + int err; + int endpoint; +- struct usb_serial_port *port; ++ struct usb_serial_port *port = urb->context; + struct tty_struct *tty; ++ struct sierra_intf_private *intfdata; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); +- port = urb->context; + + dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + ++ intfdata = port->serial->private; ++ ++ atomic_inc(&intfdata->stats.indat_cb_cnt); /* indat calls */ ++ + if (status) { + dev_dbg(&port->dev, "%s: nonzero status: %d on" + " endpoint %02x\n", __func__, status, endpoint); ++ atomic_inc(&intfdata->stats.indat_cb_fail); /* indat fails */ + } else { + if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); +- +- tty_buffer_request_room(tty, urb->actual_length); +- tty_insert_flip_string(tty, data, urb->actual_length); +- tty_flip_buffer_push(tty); +- +- tty_kref_put(tty); +- usb_serial_debug_data(debug, &port->dev, __func__, +- urb->actual_length, data); ++ if (tty) { ++ tty_buffer_request_room(tty, ++ urb->actual_length); ++ tty_insert_flip_string(tty, data, ++ urb->actual_length); ++ tty_flip_buffer_push(tty); ++ ++ tty_kref_put(tty); ++ /* tty invalid after this point */ ++ /* rx'd bytes */ ++ atomic_add(urb->actual_length, ++ &intfdata->stats.rx_bytes); ++ usb_serial_debug_data(debug, &port->dev, ++ __func__, urb->actual_length, data); ++ } + } else { + dev_dbg(&port->dev, "%s: empty read urb" + " received\n", __func__); +@@ -582,10 +765,11 @@ static void sierra_indat_callback(struct + } + + /* Resubmit urb so we continue receiving */ +- if (port->port.count && status != -ESHUTDOWN && status != -EPERM) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(port->serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "resubmit read urb failed." + "(%d)\n", err); + } +@@ -601,31 +785,29 @@ static void sierra_instat_callback(struc + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + +- dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__, +- urb, port, portdata); ++ dev_dbg(&port->dev, "%s: %p\n", __func__, urb); + + if (status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + +- if (!req_pkt) { +- dev_dbg(&port->dev, "%s: NULL req_pkt\n", +- __func__); +- return; +- } +- if ((req_pkt->bRequestType == 0xA1) && +- (req_pkt->bRequest == 0x20)) { ++ const u16 *sigp = (u16 *)(req_pkt + 1); ++ /* usb_ctrlrequest we parsed is followed by two bytes of data ++ * make sure we received that many bytes ++ */ ++ if (urb->actual_length >= sizeof(*req_pkt) + sizeof(*sigp) && ++ req_pkt->bRequestType == USB_REQUEST_TYPE_CLASS && ++ req_pkt->bRequest == USB_REQUEST_IFACE) { + int old_dcd_state; +- unsigned char signals = *((unsigned char *) +- urb->transfer_buffer + +- sizeof(struct usb_ctrlrequest)); ++ const u16 signals = get_unaligned_le16(sigp); + struct tty_struct *tty; + +- dev_dbg(&port->dev, "%s: signal x%x\n", __func__, ++ dev_dbg(&port->dev, "%s: signal 0x%x\n", __func__, + signals); + + old_dcd_state = portdata->dcd_state; +- portdata->cts_state = 1; ++ /* Note: CTS from modem is in reverse logic! */ ++ portdata->cts_state = ((signals & 0x100) ? 0 : 1); + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); +@@ -636,19 +818,20 @@ static void sierra_instat_callback(struc + tty_hangup(tty); + tty_kref_put(tty); + } else { +- dev_dbg(&port->dev, "%s: type %x req %x\n", +- __func__, req_pkt->bRequestType, +- req_pkt->bRequest); ++ /* dump the data we don't understand to log */ ++ usb_serial_debug_data(1, &port->dev, __func__, ++ urb->actual_length, urb->transfer_buffer); + } + } else + dev_dbg(&port->dev, "%s: error %d\n", __func__, status); + + /* Resubmit urb so we continue receiving IRQ data */ +- if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) { ++ if (port->port.count && ++ status != -ESHUTDOWN && status != -ENOENT && status != -ENODEV) { + usb_mark_last_busy(serial->dev); + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); +- if (err) ++ if (err && err != -ENODEV) + dev_err(&port->dev, "%s: resubmit intr urb " + "failed. (%d)\n", __func__, err); + } +@@ -659,20 +842,21 @@ static int sierra_write_room(struct tty_ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; ++ int retval; + + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); + + /* try to give a good number back based on if we have any free urbs at + * this point in time */ ++ retval = MAX_TRANSFER; ++ + spin_lock_irqsave(&portdata->lock, flags); +- if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) { +- spin_unlock_irqrestore(&portdata->lock, flags); +- dev_dbg(&port->dev, "%s - write limit hit\n", __func__); +- return 0; ++ if (portdata->outstanding_urbs >= portdata->num_out_urbs) { ++ retval = 0; + } + spin_unlock_irqrestore(&portdata->lock, flags); + +- return 2048; ++ return retval; + } + + static void sierra_stop_rx_urbs(struct usb_serial_port *port) +@@ -680,7 +864,7 @@ static void sierra_stop_rx_urbs(struct u + int i; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) ++ for (i = 0; i < portdata->num_in_urbs; i++) + usb_kill_urb(portdata->in_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); +@@ -695,10 +879,11 @@ static int sierra_submit_rx_urbs(struct + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + + ok_cnt = 0; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = portdata->in_urbs[i]; + if (!urb) + continue; ++ urb->transfer_flags |= URB_FREE_BUFFER; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", +@@ -760,41 +945,46 @@ static struct urb *sierra_setup_urb(stru + + return urb; + } +- + static void sierra_close(struct usb_serial_port *port) + { + int i; ++ struct urb *urb; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = port->serial->private; + +- + dev_dbg(&port->dev, "%s\n", __func__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + ++ usb_autopm_get_interface(serial->interface); ++ + if (serial->dev) { + mutex_lock(&serial->disc_mutex); +- if (!serial->disconnected) { +- serial->interface->needs_remote_wakeup = 0; +- usb_autopm_get_interface(serial->interface); ++ if (!serial->disconnected) + sierra_send_setup(port); +- } + mutex_unlock(&serial->disc_mutex); + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 0; + spin_unlock_irq(&intfdata->susp_lock); + +- + /* Stop reading urbs */ + sierra_stop_rx_urbs(port); + /* .. and release them */ +- for (i = 0; i < N_IN_URB; i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } ++ while((urb = usb_get_from_anchor(&portdata->delayed))) { ++ sierra_release_urb(urb); ++ usb_autopm_put_interface(serial->interface); ++ } ++ /* wait for active to finish */ ++ usb_wait_anchor_empty_timeout(&portdata->active, 500); ++ usb_kill_anchored_urbs(&portdata->active); ++ + } + } + +@@ -818,7 +1008,7 @@ static int sierra_open(struct tty_struct + + + endpoint = port->bulk_in_endpointAddress; +- for (i = 0; i < ARRAY_SIZE(portdata->in_urbs); i++) { ++ for (i = 0; i < portdata->num_in_urbs; i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); +@@ -828,6 +1018,11 @@ static int sierra_open(struct tty_struct + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + ++ /* reset outstanding out urbs counter */ ++ spin_lock_irq(&portdata->lock); ++ portdata->outstanding_urbs = 0; ++ spin_unlock_irq(&portdata->lock); ++ + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) { + /* get rid of everything as in close */ +@@ -838,7 +1033,6 @@ static int sierra_open(struct tty_struct + } + sierra_send_setup(port); + +- serial->interface->needs_remote_wakeup = 1; + spin_lock_irq(&intfdata->susp_lock); + portdata->opened = 1; + spin_unlock_irq(&intfdata->susp_lock); +@@ -847,7 +1041,6 @@ static int sierra_open(struct tty_struct + return 0; + } + +- + static void sierra_dtr_rts(struct usb_serial_port *port, int on) + { + struct usb_serial *serial = port->serial; +@@ -867,9 +1060,13 @@ static void sierra_dtr_rts(struct usb_se + + static int sierra_startup(struct usb_serial *serial) + { +- struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct usb_serial_port *port = NULL; ++ struct sierra_port_private *portdata = NULL; ++ struct sierra_iface_info *himemoryp = NULL; + int i; ++ u8 ifnum; ++ u16 fw_attr; ++ int result; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + +@@ -880,22 +1077,80 @@ static int sierra_startup(struct usb_ser + if (nmea) + sierra_vsc_set_nmea(serial->dev, 1); + +- /* Now setup per port private data */ +- for (i = 0; i < serial->num_ports; i++) { +- port = serial->port[i]; +- portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); ++ if (serial->num_ports) { ++ /* Note: One big piece of memory is allocated for all ports ++ * private data in one shot. This memory is split into equal ++ * pieces for each port. ++ */ ++ portdata = (struct sierra_port_private *)kzalloc ++ (sizeof(*portdata) * serial->num_ports, GFP_KERNEL); + if (!portdata) { +- dev_dbg(&port->dev, "%s: kmalloc for " +- "sierra_port_private (%d) failed!.\n", +- __func__, i); ++ dev_dbg(&serial->dev->dev, "%s: No memory!\n", __func__); + return -ENOMEM; + } ++ } ++ ++ /* Now setup per port private data */ ++ for (i = 0; i < serial->num_ports; i++, portdata++) { ++ port = serial->port[i]; ++ /* Initialize selected members of private data because these ++ * may be referred to right away */ + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); ++ ++ portdata->cts_state = 1; ++ ++ ifnum = i; ++ /* Assume low memory requirements */ ++ portdata->num_out_urbs = N_OUT_URB; ++ portdata->num_in_urbs = N_IN_URB; ++ ++ /* Determine actual memory requirements */ ++ if (serial->num_ports == 1) { ++ /* Get interface number for composite device */ ++ ifnum = sierra_calc_interface(serial); ++ himemoryp = ++ (struct sierra_iface_info *)&typeB_interface_list; ++ if (is_himemory(ifnum, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ else { ++ himemoryp = ++ (struct sierra_iface_info *)&typeA_interface_list; ++ if (is_himemory(i, himemoryp)) { ++ portdata->num_out_urbs = N_OUT_URB_HM; ++ portdata->num_in_urbs = N_IN_URB_HM; ++ } ++ } ++ dev_dbg(&serial->dev->dev, ++ "Memory usage (urbs) interface #%d, in=%d, out=%d\n", ++ ifnum,portdata->num_in_urbs, portdata->num_out_urbs ); + /* Set the port private data pointer */ + usb_set_serial_port_data(port, portdata); + } ++ serial->interface->needs_remote_wakeup = 1; ++ usb_autopm_disable(serial->interface); ++ ++ result = sierra_get_fw_attr(serial->dev, &fw_attr); ++ if (result == sizeof(fw_attr) && (fw_attr & SWI_FW_ATTR_PM_MASK) ) { ++ dev_info(&serial->dev->dev, ++ "APM supported, enabling autosuspend.\n"); ++ usb_autopm_enable(serial->interface); ++/******************************************************************************* ++ * If you want the default /sys/bus/usb/devices/.../.../power/level to be forced ++ * to auto, the following needs to be compiled in. ++ * Other combinations may be used for other default values (see ++ * drivers/usb/core/sysfs.c function set_level. ++ */ ++#ifdef POWER_LEVEL_AUTO ++ /* make power level default be 'auto' */ ++ serial->dev->autoresume_disabled = 0; ++ serial->dev->autosuspend_disabled = 0; ++#endif ++ } + + return 0; + } +@@ -904,19 +1159,29 @@ static void sierra_release(struct usb_se + { + int i; + struct usb_serial_port *port; +- struct sierra_port_private *portdata; ++ struct sierra_intf_private *intfdata = serial->private; + + dev_dbg(&serial->dev->dev, "%s\n", __func__); + ++ if (serial->num_ports > 0) { ++ port = serial->port[0]; ++ if (port) ++ /* Note: The entire piece of memory that was allocated ++ * in the startup routine can be released by passing ++ * a pointer to the beginning of the piece. ++ * This address corresponds to the address of the chunk ++ * that was given to port 0. ++ */ ++ kfree(usb_get_serial_port_data(port)); ++ } ++ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (!port) + continue; +- portdata = usb_get_serial_port_data(port); +- if (!portdata) +- continue; +- kfree(portdata); ++ usb_set_serial_port_data(port, NULL); + } ++ kfree(intfdata); + } + + #ifdef CONFIG_PM +@@ -938,21 +1203,21 @@ static void stop_read_write_urbs(struct + static int sierra_suspend(struct usb_serial *serial, pm_message_t message) + { + struct sierra_intf_private *intfdata; +- int b; + +- if (serial->dev->auto_pm) { +- intfdata = serial->private; +- spin_lock_irq(&intfdata->susp_lock); +- b = intfdata->in_flight; ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ ++ intfdata = serial->private; ++ spin_lock_irq(&intfdata->susp_lock); + +- if (b) { ++ if (serial->dev->auto_pm) { ++ if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; +- } else { +- intfdata->suspended = 1; +- spin_unlock_irq(&intfdata->susp_lock); + } + } ++ intfdata->suspended = 1; ++ spin_unlock_irq(&intfdata->susp_lock); ++ + stop_read_write_urbs(serial); + + return 0; +@@ -966,22 +1231,35 @@ static int sierra_resume(struct usb_seri + struct urb *urb; + int ec = 0; + int i, err; ++ int len; ++ int failed_submits; + ++ dev_dbg(&serial->dev->dev, "%s\n", __func__); ++ + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); +- ++ failed_submits = 0; + while ((urb = usb_get_from_anchor(&portdata->delayed))) { + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; ++ len = urb->transfer_buffer_length; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + intfdata->in_flight--; + usb_unanchor_urb(urb); +- usb_scuttle_anchored_urbs(&portdata->delayed); +- break; ++ failed_submits++; ++ atomic_inc(&intfdata->stats.delayed_write_err); ++ /* fix pm_usage_cnt */ ++ usb_autopm_put_interface_async( ++ port->serial->interface); ++ } else { ++ atomic_inc(&intfdata->stats.delayed_writes); ++ atomic_add(len, &intfdata->stats.tx_bytes); + } ++ /* release urb - usb_get_from_anchor increased kref */ ++ usb_free_urb(urb); + } + + if (portdata->opened) { +@@ -989,6 +1267,14 @@ static int sierra_resume(struct usb_seri + if (err) + ec++; + } ++ if (failed_submits) { ++ /* fix outstanding_urbs counter */ ++ spin_lock(&portdata->lock); /* assuming irq disabled */ ++ portdata->outstanding_urbs -= failed_submits; ++ spin_unlock(&portdata->lock); ++ /* unblock a writer */ ++ usb_serial_port_softint(port); ++ } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); +@@ -1000,6 +1286,27 @@ static int sierra_resume(struct usb_seri + #define sierra_resume NULL + #endif + ++static int sierra_reset_resume(struct usb_interface *intf) ++{ ++ struct usb_serial *serial = usb_get_intfdata(intf); ++ dev_err(&serial->dev->dev, "%s\n", __func__); ++ return usb_serial_resume(intf); ++} ++ ++static struct usb_driver sierra_driver = { ++ .name = "sierra", ++ .probe = usb_serial_probe, ++ .disconnect = usb_serial_disconnect, ++ .suspend = usb_serial_suspend, ++ .resume = usb_serial_resume, ++ .reset_resume = sierra_reset_resume, ++ .id_table = id_table, ++ ++ .no_dynamic_id = 1, ++ .supports_autosuspend = 1, ++}; ++ ++ + static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, +@@ -1020,9 +1327,12 @@ static struct usb_serial_driver sierra_d + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .release = sierra_release, +- .suspend = sierra_suspend, +- .resume = sierra_resume, ++ .port_probe = sierra_create_sysfs_attrs, ++ .port_remove = sierra_remove_sysfs_attrs, ++ .suspend = sierra_suspend, ++ .resume = sierra_resume, + .read_int_callback = sierra_instat_callback, ++ + }; + + /* Functions used by new usb-serial code. */ +@@ -1033,7 +1343,6 @@ static int __init sierra_init(void) + if (retval) + goto failed_device_register; + +- + retval = usb_register(&sierra_driver); + if (retval) + goto failed_driver_register; diff --git a/multitech/recipes/linux/linux_2.6.32.bbappend b/multitech/recipes/linux/linux_2.6.32.bbappend new file mode 100644 index 0000000..d70fa6a --- /dev/null +++ b/multitech/recipes/linux/linux_2.6.32.bbappend @@ -0,0 +1,30 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" + +SRC_URI_mtcdp = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ + ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.3.bz2;apply=yes;name=build \ + file://defconfig \ + file://linux-2.6.32.3-mach-at91.patch \ + file://linux-2.6.32.3-option.patch \ + file://linux-2.6.32.3-sierra.patch \ + file://linux-2.6.32.3-atmel_spi.patch \ + file://linux-2.6.32.3-at91_mci.patch \ + file://linux-2.6.32.3-m25p80.patch \ + file://linux-2.6.32.3-at25.patch \ + file://linux-2.6.32.3-atmel_serial_disable_hwhs.patch \ + " + +SRC_URI_mtcdp-embedded = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \ + ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.3.bz2;apply=yes;name=build \ + file://defconfig \ + file://linux-2.6.32.3-mach-at91-mtcdp-embedded.patch \ + file://linux-2.6.32.3-option.patch \ + file://linux-2.6.32.3-sierra.patch \ + file://linux-2.6.32.3-atmel_spi.patch \ + file://linux-2.6.32.3-at91_mci.patch \ + file://linux-2.6.32.3-m25p80.patch \ + file://linux-2.6.32.3-at25.patch \ + file://linux-2.6.32.3-atmel_serial_disable_hwhs.patch \ + " + +SRC_URI[build.md5sum] = "6bd3c5fea1e88bb4d0948ec3688bd8f6" +SRC_URI[build.sha256sum] = "e7526a7ae7210bc7c4f4837e9d8a666f9b126d59bee16015c41c5850d29c841f" diff --git a/multitech/recipes/mtd/mtd-utils-static_1.2.0+git.bb b/multitech/recipes/mtd/mtd-utils-static_1.2.0+git.bb new file mode 100644 index 0000000..024750c --- /dev/null +++ b/multitech/recipes/mtd/mtd-utils-static_1.2.0+git.bb @@ -0,0 +1,14 @@ +require recipes/mtd/mtd-utils_1.2.0+git.bb + +FILESPATHPKG =. "mtd-utils:" + +PR = "r1" + +EXTRA_OEMAKE = "'CC=${CC}' 'CFLAGS=${CFLAGS} -I${S}/include -DWITHOUT_XATTR -static'" + +do_install () { + install -d ${D}${bindir} + install -d ${D}${includedir}/mtd + install -m 0755 ${S}/nandwrite ${D}${bindir}/nandwrite.static +} + diff --git a/multitech/recipes/mtd/mtd-utils-static_1.4.1.bb b/multitech/recipes/mtd/mtd-utils-static_1.4.1.bb new file mode 100644 index 0000000..5ea7d8d --- /dev/null +++ b/multitech/recipes/mtd/mtd-utils-static_1.4.1.bb @@ -0,0 +1,14 @@ +require recipes/mtd/mtd-utils_${PV}.bb + +FILESPATHPKG =. "mtd-utils:" + +PR = "r1" + +EXTRA_OEMAKE = "'CC=${CC}' 'CFLAGS=${CFLAGS} -I${S}/include -DWITHOUT_XATTR -static'" + +do_install () { + install -d ${D}${bindir} + install -d ${D}${includedir}/mtd + install -m 0755 ${S}/nandwrite ${D}${bindir}/nandwrite.static +} + diff --git a/multitech/recipes/multitech/config/config.init b/multitech/recipes/multitech/config/config.init new file mode 100644 index 0000000..770be18 --- /dev/null +++ b/multitech/recipes/multitech/config/config.init @@ -0,0 +1,59 @@ +#!/bin/sh + +CONFIG_MTDC=/dev/mtd6 +CONFIG_DIR=/var/config + +FILES="network/interfaces \ +ppp/options \ +ppp/pap-secrets \ +ppp/chap-secrets \ +ppp/peers \ +passwd \ +group" + +case $1 in + start) + echo "Mounting ${CONFIG_DIR}" + mkdir -p ${CONFIG_DIR} + mount ${CONFIG_DIR} + + # Prepare flash for JFFS2 if mount fails + if [ $? -ne 0 ]; then + echo "Creating ${CONFIG_DIR}" + flash_eraseall -j ${CONFIG_MTDC} + mount ${CONFIG_DIR} + fi + + # Default all config files if requested + cd ${CONFIG_DIR} + if [ -f force_defaults ]; then + echo "Extracting default config files" + tar -xvf /etc/defaults.tar.gz + rm -f force_defaults + fi + + # Extract any missing files + TARFILES=`tar -tf /etc/defaults.tar.gz` + for file in $TARFILES; do + if [ ! -e $file ]; then + tar -xvf /etc/defaults.tar.gz $file + fi + done + + # Create links in /etc + for file in $FILES; do + if [ ! -L /etc/$file ]; then + echo "Creating link to ${CONFIG_DIR}/$file" + rm -rf /etc/$file + ln -sf ${CONFIG_DIR}/$file /etc/$file + fi + done + + ;; + + *) + echo "Usage: $0 {start}" + exit 2 + ;; + +esac diff --git a/multitech/recipes/multitech/config/group b/multitech/recipes/multitech/config/group new file mode 100644 index 0000000..ee59d5c --- /dev/null +++ b/multitech/recipes/multitech/config/group @@ -0,0 +1,40 @@ +root:*:0: +daemon:*:1: +bin:*:2: +sys:*:3: +adm:*:4: +tty:*:5: +disk:*:6: +lp:*:7: +mail:*:8: +news:*:9: +uucp:*:10: +man:*:12: +proxy:*:13: +kmem:*:15: +dialout:*:20: +fax:*:21: +voice:*:22: +cdrom:*:24: +floppy:*:25: +tape:*:26: +sudo:*:27: +audio:*:29: +dip:*:30: +www-data:*:33: +backup:*:34: +operator:*:37: +list:*:38: +irc:*:39: +src:*:40: +gnats:*:41: +shadow:*:42: +utmp:*:43: +video:*:44: +sasl:*:45: +plugdev:*:46: +staff:*:50: +games:*:60: +users:*:100: +mysql:*:64001: +nogroup:*:65534: diff --git a/multitech/recipes/multitech/config/network/interfaces b/multitech/recipes/multitech/config/network/interfaces new file mode 100644 index 0000000..b5f625a --- /dev/null +++ b/multitech/recipes/multitech/config/network/interfaces @@ -0,0 +1,12 @@ +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8) + +# The loopback interface +auto lo +iface lo inet loopback + +# Wired interface +auto eth0 +iface eth0 inet static +address 192.168.2.1 +netmask 255.255.255.0 + diff --git a/multitech/recipes/multitech/config/passwd b/multitech/recipes/multitech/config/passwd new file mode 100644 index 0000000..2dea53f --- /dev/null +++ b/multitech/recipes/multitech/config/passwd @@ -0,0 +1,18 @@ +root:zFiVnQRfb1qvQ:0:0:root:/home/root:/bin/bash +daemon:*:1:1:daemon:/usr/sbin:/bin/sh +bin:*:2:2:bin:/bin:/bin/sh +sys:*:3:3:sys:/dev:/bin/sh +sync:*:4:65534:sync:/bin:/bin/sync +games:*:5:60:games:/usr/games:/bin/sh +man:*:6:12:man:/var/cache/man:/bin/sh +lp:*:7:7:lp:/var/spool/lpd:/bin/sh +mail:*:8:8:mail:/var/mail:/bin/sh +news:*:9:9:news:/var/spool/news:/bin/sh +uucp:*:10:10:uucp:/var/spool/uucp:/bin/sh +proxy:*:13:13:proxy:/bin:/bin/sh +www-data:*:33:33:www-data:/var/www:/bin/sh +backup:*:34:34:backup:/var/backups:/bin/sh +list:*:38:38:Mailing List Manager:/var/list:/bin/sh +irc:*:39:39:ircd:/var/run/ircd:/bin/sh +gnats:*:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh +nobody:*:65534:65534:nobody:/nonexistent:/bin/sh diff --git a/multitech/recipes/multitech/config/ppp/chap-secrets b/multitech/recipes/multitech/config/ppp/chap-secrets new file mode 100644 index 0000000..60efe8f --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/chap-secrets @@ -0,0 +1,3 @@ +# Secrets for authentication using CHAP +# client server secret IP addresses +* * "" * diff --git a/multitech/recipes/multitech/config/ppp/options b/multitech/recipes/multitech/config/ppp/options new file mode 100644 index 0000000..24fed19 --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/options @@ -0,0 +1,17 @@ +# Select tty device +# +# MTCDP-E1, MTCDP-G2 +/dev/ttyS1 +# MTCDP-H4 +#/dev/ttyUSB3 +# MTCDP-EV2 +#/dev/ttyUSB0 + +# Uncomment below to run in foreground +#nodetach + +# Uncomment below to emit debug +#debug + +lock + diff --git a/multitech/recipes/multitech/config/ppp/pap-secrets b/multitech/recipes/multitech/config/ppp/pap-secrets new file mode 100644 index 0000000..f782b4a --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/pap-secrets @@ -0,0 +1,3 @@ +# Secrets for authentication using PAP +# client server secret IP addresses +* * "" * diff --git a/multitech/recipes/multitech/config/ppp/peers/cdma b/multitech/recipes/multitech/config/ppp/peers/cdma new file mode 100644 index 0000000..3fc231f --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/peers/cdma @@ -0,0 +1,9 @@ +linkname ppp0 +230400 +defaultroute +replacedefaultroute +usepeerdns +noauth +crtscts +novj +connect '/usr/sbin/chat -v -t 90 -f /etc/ppp/peers/cdma_chat' diff --git a/multitech/recipes/multitech/config/ppp/peers/cdma_chat b/multitech/recipes/multitech/config/ppp/peers/cdma_chat new file mode 100644 index 0000000..6ff750e --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/peers/cdma_chat @@ -0,0 +1,18 @@ +SAY "CDMA chat\n" +ECHO OFF +ABORT 'NO DIAL TONE' +ABORT 'NO DIALTONE' +ABORT 'NO ANSWER' +ABORT 'NO CARRIER' +ABORT 'DELAYED' +ABORT 'VOICE' +ABORT 'BUSY' +'' 'AT' +OK 'ATZ' +OK 'AT+CSQ' +SAY "Dialing...\n" +OK 'ATD#777' +SAY "Waiting for CONNECT...\n" +TIMEOUT 120 +CONNECT '' +SAY "Connected\n" diff --git a/multitech/recipes/multitech/config/ppp/peers/gsm b/multitech/recipes/multitech/config/ppp/peers/gsm new file mode 100644 index 0000000..f17fcff --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/peers/gsm @@ -0,0 +1,11 @@ +linkname ppp0 +230400 +defaultroute +replacedefaultroute +usepeerdns +ipcp-max-failure 4 +ipcp-restart 10 +noauth +crtscts +novj +connect '/usr/sbin/chat -v -t 90 -f /etc/ppp/peers/gsm_chat' diff --git a/multitech/recipes/multitech/config/ppp/peers/gsm_chat b/multitech/recipes/multitech/config/ppp/peers/gsm_chat new file mode 100644 index 0000000..8887777 --- /dev/null +++ b/multitech/recipes/multitech/config/ppp/peers/gsm_chat @@ -0,0 +1,23 @@ +SAY "GSM chat\n" +ECHO OFF +ABORT 'NO DIAL TONE' +ABORT 'NO DIALTONE' +ABORT 'NO ANSWER' +ABORT 'NO CARRIER' +ABORT 'DELAYED' +ABORT 'VOICE' +ABORT 'BUSY' +'' 'AT' +OK 'ATZ' +OK 'AT+CSQ' +#OK 'AT+CGDCONT=1,"IP","proxy"' +#OK 'AT+CGDCONT=1,"IP","ISP.CINGULAR"' +#OK 'AT+CGDCONT=1,"IP","internet2.voicestream.com"' +OK 'AT+CGDCONT=1,"IP","internet"' +SAY "Dialing...\n" +#OK 'ATD*99#' +OK 'ATD*99***1#' +SAY "Waiting for CONNECT...\n" +TIMEOUT 120 +CONNECT '' +SAY "Connected\n" diff --git a/multitech/recipes/multitech/config_1.0.bb b/multitech/recipes/multitech/config_1.0.bb new file mode 100644 index 0000000..76bba50 --- /dev/null +++ b/multitech/recipes/multitech/config_1.0.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "Provides default system config files and /var/config fs" +SECTION = "base" +LICENSE = "GPL" +PR = "r13" + +inherit update-rc.d + +INITSCRIPT_NAME = "config" +INITSCRIPT_PARAMS = "start 31 S ." + +SRC_URI = "\ + file://network \ + file://ppp \ + file://passwd \ + file://group \ + file://config.init \ +" + +CONFIGFILES = "network ppp passwd group" + +fakeroot do_install () { + cd ${WORKDIR} + + # default config files + rm -f defaults.tar.gz + tar czf defaults.tar.gz ${CONFIGFILES} + install -d ${D}${sysconfdir} + install -m 0644 ${WORKDIR}/defaults.tar.gz ${D}${sysconfdir}/defaults.tar.gz + + # init script + install -d ${D}${sysconfdir}/init.d + install -m 0755 ${WORKDIR}/config.init ${D}${sysconfdir}/init.d/config +} + +FILES_${PN} = "${sysconfdir}/defaults.tar.gz" +FILES_${PN} += "${sysconfdir}/init.d/config" diff --git a/multitech/recipes/multitech/corecdp-version.bb b/multitech/recipes/multitech/corecdp-version.bb new file mode 100644 index 0000000..6b4bd37 --- /dev/null +++ b/multitech/recipes/multitech/corecdp-version.bb @@ -0,0 +1,18 @@ +LICENSE = "MIT" + +PV = "${DISTRO_VERSION}" +PR = "r1" +PE = "1" + +PACKAGES = "${PN}" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +export METADATA_REVISION +export METADATA_BRANCH + +do_install() { + mkdir -p ${D}${sysconfdir} + echo "CoreCDP ${DISTRO_VERSION}" > ${D}${sysconfdir}/corecdp-version + echo "Built from branch: ${METADATA_BRANCH}" >> ${D}${sysconfdir}/corecdp-version + echo "Revision: ${METADATA_REVISION}" >> ${D}${sysconfdir}/corecdp-version +} diff --git a/multitech/recipes/multitech/helloworld-autotools_1.0.0.bb b/multitech/recipes/multitech/helloworld-autotools_1.0.0.bb new file mode 100644 index 0000000..e7b8f77 --- /dev/null +++ b/multitech/recipes/multitech/helloworld-autotools_1.0.0.bb @@ -0,0 +1,13 @@ +DESCRIPTION = "Hello World Recipe using autotools" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/utils" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "git://git.multitech.net/helloworld-autotools.git;protocol=git;tag=1.0.0" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/multitech/mts-id-eeprom_0.0.1.bb b/multitech/recipes/multitech/mts-id-eeprom_0.0.1.bb new file mode 100644 index 0000000..8a3a310 --- /dev/null +++ b/multitech/recipes/multitech/mts-id-eeprom_0.0.1.bb @@ -0,0 +1,14 @@ +DESCRIPTION = "ID EEPROM tool for MTCDP" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/utils" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" +DEPENDS = "mts-io" + +SRC_URI = "git://git.multitech.net/mts-id-eeprom.git;protocol=git;tag=${PV}" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/multitech/mts-io.inc b/multitech/recipes/multitech/mts-io.inc new file mode 100644 index 0000000..3c8fb29 --- /dev/null +++ b/multitech/recipes/multitech/mts-io.inc @@ -0,0 +1,59 @@ +DESCRIPTION = "mts-io controller and sysfs wrapper" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "base" +PRIORITY = "optional" +LICENSE = "GPL" +DEPENDS = "virtual/kernel" +RDEPENDS = "kernel (${KERNEL_VERSION})" +INC_PR = "r1" + +SRC_URI = " \ + file://mts-io.init \ + git://git.multitech.net/cdp-io-controller.git;protocol=git;tag=v${PV} \ +" +S = "${WORKDIR}/git/io-module" + +inherit module-base +inherit update-rc.d + +EXTRA_OEMAKE = " -C ${STAGING_KERNEL_DIR} \ + M=${S} \ + modules \ + " + +do_configure () { + echo "Nothing to configure for mts-io" +} + +do_compile () { + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + oe_runmake +} + +PACKAGES = "${PN}" + +FILES_${PN} = "${base_libdir}/modules/${KERNEL_VERSION}/extra/mts_io.ko" +FILES_${PN} += "${sysconfdir}/init.d/mts-io" +FILES_${PN} += "${libdir}/mts-io-sysfs*" +FILES_${PN} += "${sbindir}/mts-io-sysfs" + +INITSCRIPT_NAME = "mts-io" +INITSCRIPT_PARAMS = "start 90 S ." + +PARALLEL_MAKE = "" + +fakeroot do_install () { + install -m 0755 -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/extra + # use cp instead of install so the driver doesn't get stripped + cp ${S}/mts_io.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/extra + cp ${S}/mts_io.h ${STAGING_KERNEL_DIR}/include/linux/ + cp ${S}/mts_io.h ${STAGING_INCDIR}/linux/ + + install -d ${D}${sysconfdir}/init.d + install -m 0755 ${WORKDIR}/mts-io.init ${D}${sysconfdir}/init.d/mts-io + + install -m 0755 -d ${D}${sbindir} + install -d ${D}${libdir}/mts-io-sysfs + install -m 0755 ${WORKDIR}/git/io-tool/mts-io-sysfs-inc.sh ${D}${libdir}/mts-io-sysfs + install -m 0755 ${WORKDIR}/git/io-tool/mts-io-sysfs ${D}${sbindir}/mts-io-sysfs +} diff --git a/multitech/recipes/multitech/mts-io/mts-io.init b/multitech/recipes/multitech/mts-io/mts-io.init new file mode 100644 index 0000000..77dd0e2 --- /dev/null +++ b/multitech/recipes/multitech/mts-io/mts-io.init @@ -0,0 +1,20 @@ +#!/bin/sh + +case $1 in + start) + echo "Loading mts-io module" + modprobe mts_io + ;; + + stop) + echo "Unloading mts-io module" + modprobe -r mts_io + ;; + + *) + echo "Usage: $0 {start|stop}" + exit 2 + ;; +esac + + diff --git a/multitech/recipes/multitech/mts-io_0.3.0.bb b/multitech/recipes/multitech/mts-io_0.3.0.bb new file mode 100644 index 0000000..f903020 --- /dev/null +++ b/multitech/recipes/multitech/mts-io_0.3.0.bb @@ -0,0 +1,3 @@ +require mts-io.inc + +PR = "${INC_PR}.0" diff --git a/multitech/recipes/multitech/mts-io_0.4.1.bb b/multitech/recipes/multitech/mts-io_0.4.1.bb new file mode 100644 index 0000000..f903020 --- /dev/null +++ b/multitech/recipes/multitech/mts-io_0.4.1.bb @@ -0,0 +1,3 @@ +require mts-io.inc + +PR = "${INC_PR}.0" diff --git a/multitech/recipes/multitech/sms-utils.inc b/multitech/recipes/multitech/sms-utils.inc new file mode 100644 index 0000000..b0b15a3 --- /dev/null +++ b/multitech/recipes/multitech/sms-utils.inc @@ -0,0 +1,13 @@ +DESCRIPTION = "SMS Utilities" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/utils" +PRIORITY = "optional" +LICENSE = "GPL" +DEPENDS = "libesmtp libyaml" + +SRC_URI = "git://git.multitech.net/sms-utils.git;protocol=git;tag=${PV}" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/multitech/sms-utils_0.0.3.bb b/multitech/recipes/multitech/sms-utils_0.0.3.bb new file mode 100644 index 0000000..f796b24 --- /dev/null +++ b/multitech/recipes/multitech/sms-utils_0.0.3.bb @@ -0,0 +1,3 @@ +require sms-utils.inc + +PR = "r0" diff --git a/multitech/recipes/multitech/sms-utils_0.0.4.bb b/multitech/recipes/multitech/sms-utils_0.0.4.bb new file mode 100644 index 0000000..f796b24 --- /dev/null +++ b/multitech/recipes/multitech/sms-utils_0.0.4.bb @@ -0,0 +1,3 @@ +require sms-utils.inc + +PR = "r0" diff --git a/multitech/recipes/multitech/u-boot-linux-utils_0.0.1.bb b/multitech/recipes/multitech/u-boot-linux-utils_0.0.1.bb new file mode 100644 index 0000000..b31f10a --- /dev/null +++ b/multitech/recipes/multitech/u-boot-linux-utils_0.0.1.bb @@ -0,0 +1,15 @@ +DESCRIPTION = "U-Boot Linux Utilities" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/utils" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" + +DEPENDS = "mtd-utils" + +SRC_URI = "git://git.multitech.net/u-boot-linux-utils.git;protocol=git;tag=0.0.1" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/multitech/upgrade-reboot_1.0.0.bb b/multitech/recipes/multitech/upgrade-reboot_1.0.0.bb new file mode 100644 index 0000000..e171cd1 --- /dev/null +++ b/multitech/recipes/multitech/upgrade-reboot_1.0.0.bb @@ -0,0 +1,13 @@ +DESCRIPTION = "Reboot command to run after firmware upgrade" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/utils" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "git://git.multitech.net/upgrade-reboot.git;protocol=git;tag=1.0.0" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/multitech/venus-gps_0.0.2.bb b/multitech/recipes/multitech/venus-gps_0.0.2.bb new file mode 100644 index 0000000..5aa9d67 --- /dev/null +++ b/multitech/recipes/multitech/venus-gps_0.0.2.bb @@ -0,0 +1,13 @@ +DESCRIPTION = "SkyTraq Venus GPS Example" +HOMEPAGE = "http://www.multitech.net/" +SECTION = "console/network" +PRIORITY = "optional" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "git://git.multitech.net/venus-gps.git;protocol=git;tag=0.0.2" +S = "${WORKDIR}/git" + +inherit autotools + +PARALLEL_MAKE = "" diff --git a/multitech/recipes/protobuf/protobuf-native_2.3.0.bb b/multitech/recipes/protobuf/protobuf-native_2.3.0.bb new file mode 100644 index 0000000..c2b79de --- /dev/null +++ b/multitech/recipes/protobuf/protobuf-native_2.3.0.bb @@ -0,0 +1,7 @@ +require protobuf.inc + +PR = "r0" + +SRC_URI[tarball.md5sum] = f2964f636b3c67d1e9d8b90819fa8ddb + +inherit native diff --git a/multitech/recipes/protobuf/protobuf.inc b/multitech/recipes/protobuf/protobuf.inc new file mode 100644 index 0000000..0869a14 --- /dev/null +++ b/multitech/recipes/protobuf/protobuf.inc @@ -0,0 +1,8 @@ +DESCRIPTION = "Google Protocol Buffers" +HOMEPAGE = "http://www.google.com/" +PRIORITY = "optional" +LICENSE = "BSD" + +SRC_URI = "http://protobuf.googlecode.com/files/protobuf-${PV}.tar.bz2;name=tarball" + +inherit autotools diff --git a/multitech/recipes/protobuf/protobuf_2.3.0.bb b/multitech/recipes/protobuf/protobuf_2.3.0.bb new file mode 100644 index 0000000..6efb8f7 --- /dev/null +++ b/multitech/recipes/protobuf/protobuf_2.3.0.bb @@ -0,0 +1,11 @@ +require protobuf.inc + +PR = "r0" + +DEPENDS = "protobuf-native" + +SRC_URI[tarball.md5sum] = f2964f636b3c67d1e9d8b90819fa8ddb + +# use native protoc for running unit tests +EXTRA_OECONF += "--with-protoc=${STAGING_BINDIR_NATIVE}/protoc" + diff --git a/multitech/recipes/sysvinit/sysvinit/corecdp/inittab b/multitech/recipes/sysvinit/sysvinit/corecdp/inittab new file mode 100644 index 0000000..7b0dae8 --- /dev/null +++ b/multitech/recipes/sysvinit/sysvinit/corecdp/inittab @@ -0,0 +1,33 @@ +# /etc/inittab: init(8) configuration. +# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ + +# The default runlevel. +id:5:initdefault: + +# Boot-time system configuration/initialization script. +# This is run first except when booting in emergency (-b) mode. +si::sysinit:/etc/init.d/rcS + +# What to do in single-user mode. +~~:S:wait:/sbin/sulogin + +# /etc/init.d executes the S and K scripts upon change +# of runlevel. +# +# Runlevel 0 is halt. +# Runlevel 1 is single-user. +# Runlevels 2-5 are multi-user. +# Runlevel 6 is reboot. + +l0:0:wait:/etc/init.d/rc 0 +l1:1:wait:/etc/init.d/rc 1 +l2:2:wait:/etc/init.d/rc 2 +l3:3:wait:/etc/init.d/rc 3 +l4:4:wait:/etc/init.d/rc 4 +l5:5:wait:/etc/init.d/rc 5 +l6:6:wait:/etc/init.d/rc 6 +# Normally not reached, but fallthrough in case of emergency. +z6:6:respawn:/sbin/sulogin + +# USB serial terminal +GS0:2345:respawn:/sbin/getty 115200 ttyGS0 diff --git a/multitech/recipes/sysvinit/sysvinit/corecdp/rcS-default b/multitech/recipes/sysvinit/sysvinit/corecdp/rcS-default new file mode 100644 index 0000000..5bb57ef --- /dev/null +++ b/multitech/recipes/sysvinit/sysvinit/corecdp/rcS-default @@ -0,0 +1,25 @@ +# +# Defaults for the boot scripts in /etc/rcS.d +# + +# Time files in /tmp are kept in days. +TMPTIME=0 +# Set to yes if you want sulogin to be spawned on bootup +SULOGIN=no +# Set to no if you want to be able to login over telnet/rlogin +# before system startup is complete (as soon as inetd is started) +DELAYLOGIN=no +# Set UTC=yes if your system clock is set to UTC (GMT), and UTC=no if not. +UTC=yes +# Set VERBOSE to "no" if you would like a more quiet bootup. +VERBOSE=no +# Set EDITMOTD to "no" if you don't want /etc/motd to be editted automatically +EDITMOTD=no +# Whether to fsck root on boot +ENABLE_ROOTFS_FSCK=no +# Set FSCKFIX to "yes" if you want to add "-y" to the fsck at startup. +FSCKFIX=yes +# Set TICKADJ to the correct tick value for this specific machine +#TICKADJ=10000 +# Enable caching in populate-volatile.sh +VOLATILE_ENABLE_CACHE=yes diff --git a/multitech/recipes/sysvinit/sysvinit_2.86.bbappend b/multitech/recipes/sysvinit/sysvinit_2.86.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/sysvinit/sysvinit_2.86.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/fw_env.config b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/fw_env.config new file mode 100644 index 0000000..41b9605 --- /dev/null +++ b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/fw_env.config @@ -0,0 +1,7 @@ +# Configuration file for fw_{printenv,setenv} utility. +# Up to two entries are valid, in this case the redundant +# environment sector is assumed present. + +# MTD device name Device offset Env. size Flash sector size +/dev/mtd3 0x0000 0x20000 0x20000 +/dev/mtd4 0x0000 0x20000 0x20000 diff --git a/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/u-boot-1.3.4-mts.patch b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/u-boot-1.3.4-mts.patch new file mode 100644 index 0000000..4d05ba3 --- /dev/null +++ b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp-embedded/u-boot-1.3.4-mts.patch @@ -0,0 +1,3298 @@ +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9260ek/at91sam9260ek.c u-boot-1.3.4/board/atmel/at91sam9260ek/at91sam9260ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9260ek/at91sam9260ek.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/board/atmel/at91sam9260ek/at91sam9260ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -125,6 +125,8 @@ static void at91sam9260ek_spi_hw_init(vo + #ifdef CONFIG_MACB + static void at91sam9260ek_macb_hw_init(void) + { ++ unsigned long rstc; ++ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + +@@ -147,6 +149,8 @@ static void at91sam9260ek_macb_hw_init(v + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | +@@ -159,9 +163,8 @@ static void at91sam9260ek_macb_hw_init(v + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | +- (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ (rstc) | + AT91_RSTC_URSTEN); +- + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9263ek/at91sam9263ek.c u-boot-1.3.4/board/atmel/at91sam9263ek/at91sam9263ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9263ek/at91sam9263ek.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/board/atmel/at91sam9263ek/at91sam9263ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -128,6 +128,8 @@ static void at91sam9263ek_spi_hw_init(vo + #ifdef CONFIG_MACB + static void at91sam9263ek_macb_hw_init(void) + { ++ unsigned long rstc; ++ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + +@@ -145,6 +147,8 @@ static void at91sam9263ek_macb_hw_init(v + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | +@@ -157,7 +161,7 @@ static void at91sam9263ek_macb_hw_init(v + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | +- (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ (rstc) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/at91sam9g10ek.c u-boot-1.3.4/board/atmel/at91sam9g10ek/at91sam9g10ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/at91sam9g10ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/at91sam9g10ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,281 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/at91sam9261_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#include <lcd.h> ++#include <atmel_lcdc.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g10ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g10ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ /* ++ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); ++ */ ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ /* ++ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); ++ */ ++ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ /* ++ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); ++ */ ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(2)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC15, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++ ++ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g10ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_DRIVER_DM9000 ++static void at91sam9g10ek_dm9000_hw_init(void) ++{ ++ /* Configure SMC CS2 for DM9000 */ ++ /* ++ at91_sys_write(AT91_SMC_SETUP(2), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(2), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); ++ at91_sys_write(AT91_SMC_CYCLE(2), ++ AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); ++ */ ++ at91_sys_write(AT91_SMC_SETUP(2), ++ AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(2), ++ AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) | ++ AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8)); ++ at91_sys_write(AT91_SMC_CYCLE(2), ++ AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20)); ++ at91_sys_write(AT91_SMC_MODE(2), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | ++ AT91_SMC_TDF_(1)); ++ ++ /* Configure Reset signal as output */ ++ at91_set_gpio_output(AT91_PIN_PC10, 0); ++ ++ /* Configure Interrupt pin as input, no pull-up */ ++ at91_set_gpio_input(AT91_PIN_PC11, 0); ++} ++#endif ++ ++#ifdef CONFIG_LCD ++vidinfo_t panel_info = { ++ vl_col: 240, ++ vl_row: 320, ++ vl_clk: 4965000, ++ vl_sync: ATMEL_LCDC_INVLINE_INVERTED | ++ ATMEL_LCDC_INVFRAME_INVERTED, ++ vl_bpix: 3, ++ vl_tft: 1, ++ vl_hsync_len: 5, ++ vl_left_margin: 1, ++ vl_right_margin:33, ++ vl_vsync_len: 1, ++ vl_upper_margin:1, ++ vl_lower_margin:0, ++ mmio: AT91SAM9261_LCDC_BASE, ++}; ++ ++void lcd_enable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ ++} ++ ++void lcd_disable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ ++} ++ ++static void at91sam9g10ek_lcd_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ ++ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ ++ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ ++ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ ++ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ ++ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ ++ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ ++ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ ++ ++ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); ++ ++ /* gd->fb_base = AT91SAM9261_SRAM_BASE; */ ++ gd->fb_base = 0x23E00000; ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G10EK-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g10ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g10ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g10ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_DRIVER_DM9000 ++ at91sam9g10ek_dm9000_hw_init(); ++#endif ++#ifdef CONFIG_LCD ++ at91sam9g10ek_lcd_hw_init(); ++#endif ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_DRIVER_DM9000 ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/config.mk u-boot-1.3.4/board/atmel/at91sam9g10ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/led.c u-boot-1.3.4/board/atmel/at91sam9g10ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/led.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,78 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#define RED_LED AT91_PIN_PA23 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ ++#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void yellow_LED_on(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, 0); ++} ++ ++void yellow_LED_off(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, 1); ++} ++ ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ at91_set_gpio_output(YELLOW_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++ at91_set_gpio_value(YELLOW_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/Makefile u-boot-1.3.4/board/atmel/at91sam9g10ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g10ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/nand.c u-boot-1.3.4/board/atmel/at91sam9g10ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 22) /* our ALE is AD22 */ ++#define MASK_CLE (1 << 21) /* our CLE is AD21 */ ++ ++static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91sam9261ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC15); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91sam9261ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9261ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/partition.c u-boot-1.3.4/board/atmel/at91sam9g10ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-1.3.4/board/atmel/at91sam9g20ek/at91sam9g20ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/at91sam9g20ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,258 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91sam9260_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g20ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g20ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC13, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g20ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91sam9g20ek_macb_hw_init(void) ++{ ++ unsigned long rstc; ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA17) => PHY normal mode (not Test mode) ++ * ERX0 (PA14) => PHY ADDR0 ++ * ERX1 (PA15) => PHY ADDR1 ++ * ERX2 (PA25) => PHY ADDR2 ++ * ERX3 (PA26) => PHY ADDR3 ++ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (rstc) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ ++#if defined(CONFIG_AT91SAM9G20EK) || defined(CONFIG_AT91SAM9G20EK_2MMC) ++ /* ++ * use PA10, PA11 for ETX2, ETX3. ++ * PA23 and PA24 are for TWI EEPROM ++ */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++#else ++ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ ++#endif ++ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G20EK-Board */ ++#ifdef CONFIG_AT91SAM9G20EK_2MMC ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; ++#else ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; ++#endif ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g20ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g20ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g20ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91sam9g20ek_macb_hw_init(); ++#endif ++ ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/config.mk u-boot-1.3.4/board/atmel/at91sam9g20ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/led.c u-boot-1.3.4/board/atmel/at91sam9g20ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/led.c 2010-03-25 18:48:37.000000000 -0500 +@@ -0,0 +1,69 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#ifdef CONFIG_AT91SAM9G20EK_2MMC ++#define RED_LED AT91_PIN_PB31 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PB30 /* this is the user led */ ++#else ++#define RED_LED AT91_PIN_PA31 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA30 /* this is the user led */ ++#endif ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/Makefile u-boot-1.3.4/board/atmel/at91sam9g20ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g20ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/nand.c u-boot-1.3.4/board/atmel/at91sam9g20ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91sam9g20ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC13); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91sam9g20ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9g20ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/partition.c u-boot-1.3.4/board/atmel/at91sam9g20ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,324 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/sizes.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/at91sam9g45_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#include <lcd.h> ++#include <atmel_lcdc.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91samm10g45ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PD6, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PD7, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91samm10g45ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC8, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91samm10g45ek_spi_hw_init(void) ++{ ++ at91_set_B_periph(AT91_PIN_PB3, 0); /* SPI0_NPCS0 */ ++ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ ++ at91_set_B_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91samm10g45ek_macb_hw_init(void) ++{ ++ unsigned long rstc; ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA15) => PHY normal mode (not Test mode) ++ * ERX0 (PA12) => PHY ADDR0 ++ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA12) | ++ pin_to_mask(AT91_PIN_PA13), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (rstc) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA12) | ++ pin_to_mask(AT91_PIN_PA13), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */ ++ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++#ifdef CONFIG_LCD ++vidinfo_t panel_info = { ++ vl_col: 480, ++ vl_row: 272, ++ vl_clk: 125000, ++ vl_sync: ATMEL_LCDC_INVLINE_NORMAL | ++ ATMEL_LCDC_INVFRAME_NORMAL, ++ vl_bpix: 3, ++ vl_tft: 1, ++ vl_hsync_len: 41, ++ vl_left_margin: 2, ++ vl_right_margin:2, ++ vl_vsync_len: 1, ++ vl_upper_margin:2, ++ vl_lower_margin:2, ++ mmio: AT91SAM9G45_LCDC_BASE, ++}; ++ ++void lcd_enable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PE6, 1); /* power up */ ++} ++ ++void lcd_disable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PE6, 0); /* power down */ ++} ++ ++static void at91samm10g45ek_lcd_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ ++ ++ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ ++ ++ at91_set_gpio_input(AT91_PIN_PE6, 0); /* LCDDEN */ ++ ++ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ ++ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ ++ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ ++ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ ++ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ ++ at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ ++ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ ++ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ ++ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ ++ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ ++ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ ++ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ ++ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC); ++ ++ gd->fb_base = AT91SAM9G45_SRAM_BASE; ++} ++#endif ++ ++#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) ++extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); ++ ++int board_eth_init(bd_t *bis) ++{ ++ macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00); ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9M10G45EK-Board */ ++#ifdef CONFIG_AT91SAM9M10G45EK ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; ++#elif defined CONFIG_AT91SAM9G45EKES ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES; ++#elif defined CONFIG_AT91SAM9M10EKES ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10EKES; ++#endif ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91samm10g45ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91samm10g45ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91samm10g45ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91samm10g45ek_macb_hw_init(); ++#endif ++ ++#ifdef CONFIG_LCD ++ at91samm10g45ek_lcd_hw_init(); ++#endif ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/config.mk u-boot-1.3.4/board/atmel/at91sam9m10g45ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x73f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/led.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/led.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,64 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#define RED_LED AT91_PIN_PD31 /* this is the user1 led */ ++#define GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/Makefile u-boot-1.3.4/board/atmel/at91sam9m10g45ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9m10g45ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/nand.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91samm10g45ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91samm10g45ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC8); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91samm10g45ek_nand_hwcontrol; ++ nand->dev_ready = at91samm10g45ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/partition.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,39 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/cpu/arm926ejs/at91sam9/usb.c u-boot-1.3.4/cpu/arm926ejs/at91sam9/usb.c +--- u-boot-1.3.4-vanilla/cpu/arm926ejs/at91sam9/usb.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/cpu/arm926ejs/at91sam9/usb.c 2010-03-25 16:45:59.000000000 -0500 +@@ -33,7 +33,7 @@ int usb_cpu_init(void) + { + /* Enable USB host clock. */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); +-#ifdef CONFIG_AT91SAM9261 ++#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0); + #else + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); +@@ -46,7 +46,7 @@ int usb_cpu_stop(void) + { + /* Disable USB host clock. */ + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); +-#ifdef CONFIG_AT91SAM9261 ++#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0); + #else + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); +diff -uprN u-boot-1.3.4-vanilla/doc/README.at91 u-boot-1.3.4/doc/README.at91 +--- u-boot-1.3.4-vanilla/doc/README.at91 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/doc/README.at91 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,88 @@ ++Atmel AT91 Evaluation kits ++ ++http://atmel.com/dyn/products/tools.asp?family_id=605#1443 ++ ++------------------------------------------------------------------------------ ++AT91SAM9260EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) ++ 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 1 (default) ++ - Dataflash on SPI chip select 0 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9260ek_config - use data flash (spi cs1) (default) ++ make at91sam9260ek_nandflash_config - use nand flash ++ make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) ++ make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9261EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash ++ 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 (default) ++ - Dataflash on SPI chip select 3 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9261ek_config - use data flash (spi cs0) (default) ++ make at91sam9261ek_nandflash_config - use nand flash ++ make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) ++ make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9263EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9263ek_config - use data flash (spi cs0) (default) ++ make at91sam9263ek_nandflash_config - use nand flash ++ make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9RLEK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9263ek_config - use data flash (spi cs0) (default) ++ make at91sam9263ek_nandflash_config - use nand flash ++ make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) +diff -uprN u-boot-1.3.4-vanilla/drivers/net/macb.c u-boot-1.3.4/drivers/net/macb.c +--- u-boot-1.3.4-vanilla/drivers/net/macb.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/drivers/net/macb.c 2010-05-04 14:32:15.000000000 -0500 +@@ -55,7 +55,7 @@ + #define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128) + #define CFG_MACB_TX_RING_SIZE 16 + #define CFG_MACB_TX_TIMEOUT 1000 +-#define CFG_MACB_AUTONEG_TIMEOUT 5000000 ++#define CFG_MACB_AUTONEG_TIMEOUT 3000000 + + struct macb_dma_desc { + u32 addr; +@@ -290,11 +290,12 @@ static int macb_recv(struct eth_device * + return 0; + } + +-static void macb_phy_reset(struct macb_device *macb) ++static u16 macb_phy_reset(struct macb_device *macb) + { + struct eth_device *netdev = &macb->netdev; + int i; +- u16 status, adv; ++ u16 status = 0; ++ u16 adv; + + adv = ADVERTISE_CSMA | ADVERTISE_ALL; + macb_mdio_write(macb, MII_ADVERTISE, adv); +@@ -314,6 +315,8 @@ static void macb_phy_reset(struct macb_d + else + printf("%s: Autonegotiation timed out (status=0x%04x)\n", + netdev->name, status); ++ ++ return status; + } + + static int macb_phy_init(struct macb_device *macb) +@@ -334,14 +337,7 @@ static int macb_phy_init(struct macb_dev + status = macb_mdio_read(macb, MII_BMSR); + if (!(status & BMSR_LSTATUS)) { + /* Try to re-negotiate if we don't have link already. */ +- macb_phy_reset(macb); +- +- for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { +- status = macb_mdio_read(macb, MII_BMSR); +- if (status & BMSR_LSTATUS) +- break; +- udelay(100); +- } ++ status = macb_phy_reset(macb); + } + + if (!(status & BMSR_LSTATUS)) { +@@ -414,18 +410,16 @@ static int macb_init(struct eth_device * + + /* choose RMII or MII mode. This depends on the board */ + #ifdef CONFIG_RMII +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); +-#else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, 0); +-#endif + #else +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(CLKEN)); ++ macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); ++#endif + #else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, MACB_BIT(MII)); ++#else ++ macb_writel(macb, USRIO, MACB_BIT(CLKEN)); + #endif + #endif /* CONFIG_RMII */ + +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,135 @@ ++/* ++ * Chip-specific header file for the AT91SAM9M1x family ++ * ++ * Copyright (C) 2008 Atmel Corporation. ++ * ++ * Common definitions. ++ * Based on AT91SAM9G45 preliminary datasheet. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91SAM9G45_H ++#define AT91SAM9G45_H ++ ++/* ++ * Peripheral identifiers/interrupts. ++ */ ++#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ ++#define AT91_ID_SYS 1 /* System Controller Interrupt */ ++#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ ++#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ ++#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ ++#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ ++#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ ++#define AT91SAM9G45_ID_US0 7 /* USART 0 */ ++#define AT91SAM9G45_ID_US1 8 /* USART 1 */ ++#define AT91SAM9G45_ID_US2 9 /* USART 2 */ ++#define AT91SAM9G45_ID_US3 10 /* USART 3 */ ++#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ ++#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ ++#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ ++#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ ++#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ ++#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ ++#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ ++#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ ++#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ ++#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ ++#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ ++#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ ++#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ ++#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ ++#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ ++#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ ++#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ ++#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ ++#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ ++#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ ++#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ ++ ++/* ++ * User Peripheral physical base addresses. ++ */ ++#define AT91SAM9G45_BASE_UDPHS 0xfff78000 ++#define AT91SAM9G45_BASE_TC0 0xfff7c000 ++#define AT91SAM9G45_BASE_TC1 0xfff7c040 ++#define AT91SAM9G45_BASE_TC2 0xfff7c080 ++#define AT91SAM9G45_BASE_MCI0 0xfff80000 ++#define AT91SAM9G45_BASE_TWI0 0xfff84000 ++#define AT91SAM9G45_BASE_TWI1 0xfff88000 ++#define AT91SAM9G45_BASE_US0 0xfff8c000 ++#define AT91SAM9G45_BASE_US1 0xfff90000 ++#define AT91SAM9G45_BASE_US2 0xfff94000 ++#define AT91SAM9G45_BASE_US3 0xfff98000 ++#define AT91SAM9G45_BASE_SSC0 0xfff9c000 ++#define AT91SAM9G45_BASE_SSC1 0xfffa0000 ++#define AT91SAM9G45_BASE_SPI0 0xfffa4000 ++#define AT91SAM9G45_BASE_SPI1 0xfffa8000 ++#define AT91SAM9G45_BASE_AC97C 0xfffac000 ++#define AT91SAM9G45_BASE_TSC 0xfffb0000 ++#define AT91SAM9G45_BASE_ISI 0xfffb4000 ++#define AT91SAM9G45_BASE_PWMC 0xfffb8000 ++#define AT91SAM9G45_BASE_EMAC 0xfffbc000 ++#define AT91SAM9G45_BASE_AES 0xfffc0000 ++#define AT91SAM9G45_BASE_TDES 0xfffc4000 ++#define AT91SAM9G45_BASE_SHA 0xfffc8000 ++#define AT91SAM9G45_BASE_TRNG 0xfffcc000 ++#define AT91SAM9G45_BASE_MCI1 0xfffd0000 ++#define AT91SAM9G45_BASE_TC3 0xfffd4000 ++#define AT91SAM9G45_BASE_TC4 0xfffd4040 ++#define AT91SAM9G45_BASE_TC5 0xfffd4080 ++#define AT91_BASE_SYS 0xffffe200 ++ ++/* ++ * System Peripherals (offset from AT91_BASE_SYS) ++ */ ++#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) ++#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) ++#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) ++#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) ++#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) ++#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) ++#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) ++#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) ++#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) ++#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) ++#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) ++#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) ++#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) ++#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) ++#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) ++#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) ++#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) ++#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) ++#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) ++#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) ++#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) ++ ++#define AT91_USART0 AT91SAM9G45_BASE_US0 ++#define AT91_USART1 AT91SAM9G45_BASE_US1 ++#define AT91_USART2 AT91SAM9G45_BASE_US2 ++#define AT91_USART3 AT91SAM9G45_BASE_US3 ++ ++/* ++ * Internal Memory. ++ */ ++#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ ++#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ ++ ++#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ ++#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ ++ ++#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ ++#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ ++#define AT91SAM9G45_HCI_BASE 0x00700000 /* USB Host controller (OHCI) */ ++#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ ++#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ ++ ++#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 ++ ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,153 @@ ++/* ++ * Matrix-centric header file for the AT91SAM9M1x family ++ * ++ * Copyright (C) 2008 Atmel Corporation. ++ * ++ * Memory Controllers (MATRIX, EBI) - System peripherals registers. ++ * Based on AT91SAM9G45 preliminary datasheet. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91SAM9G45_MATRIX_H ++#define AT91SAM9G45_MATRIX_H ++ ++#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ ++#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ ++#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ ++#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ ++#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ ++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ ++#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ ++#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ ++#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ ++#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ ++#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ ++#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ ++#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ ++#define AT91_MATRIX_ULBT_INFINITE (0 << 0) ++#define AT91_MATRIX_ULBT_SINGLE (1 << 0) ++#define AT91_MATRIX_ULBT_FOUR (2 << 0) ++#define AT91_MATRIX_ULBT_EIGHT (3 << 0) ++#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) ++#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) ++#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) ++#define AT91_MATRIX_ULBT_128 (7 << 0) ++ ++#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ ++#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ ++#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ ++#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ ++#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ ++#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ ++#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ ++#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ ++#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ ++#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ ++#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) ++#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ ++ ++#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ ++#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ ++#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ ++#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ ++#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ ++#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ ++#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ ++#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ ++#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ ++#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ ++#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ ++#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ ++#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ ++#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ ++#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ ++#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ ++#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ ++#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ ++#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ ++#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ ++#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ ++#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ ++#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ ++#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ ++#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ ++#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ ++#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ ++#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ ++ ++#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ ++#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ ++#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ ++#define AT91_MATRIX_RCB2 (1 << 2) ++#define AT91_MATRIX_RCB3 (1 << 3) ++#define AT91_MATRIX_RCB4 (1 << 4) ++#define AT91_MATRIX_RCB5 (1 << 5) ++#define AT91_MATRIX_RCB6 (1 << 6) ++#define AT91_MATRIX_RCB7 (1 << 7) ++#define AT91_MATRIX_RCB8 (1 << 8) ++#define AT91_MATRIX_RCB9 (1 << 9) ++#define AT91_MATRIX_RCB10 (1 << 10) ++#define AT91_MATRIX_RCB11 (1 << 11) ++ ++#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ ++#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ ++#define AT91_MATRIX_ITCM_0 (0 << 0) ++#define AT91_MATRIX_ITCM_32 (6 << 0) ++#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ ++#define AT91_MATRIX_DTCM_0 (0 << 4) ++#define AT91_MATRIX_DTCM_32 (6 << 4) ++#define AT91_MATRIX_DTCM_64 (7 << 4) ++#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ ++#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) ++#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) ++ ++#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ ++#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ ++#define AT91C_VDEC_SEL_OFF (0 << 0) ++#define AT91C_VDEC_SEL_ON (1 << 0) ++ ++#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ ++#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ ++#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) ++#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) ++#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ ++#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) ++#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) ++#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ ++#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) ++#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) ++#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ ++#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) ++#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) ++#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ ++#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) ++#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) ++#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ ++#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) ++#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) ++#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ ++#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) ++#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) ++#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ ++#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) ++#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) ++ ++#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ ++#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ ++#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) ++#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) ++#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ ++ ++#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ ++#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ ++#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) ++#define AT91_MATRIX_WPSR_WPV (1 << 0) ++#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/hardware.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/hardware.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/hardware.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/hardware.h 2010-03-25 16:45:59.000000000 -0500 +@@ -18,13 +18,13 @@ + + #if defined(CONFIG_AT91RM9200) + #include <asm/arch/at91rm9200.h> +-#elif defined(CONFIG_AT91SAM9260) ++#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) + #include <asm/arch/at91sam9260.h> + #define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC + #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 + #define AT91_ID_UHP AT91SAM9260_ID_UHP + #define AT91_PMC_UHP AT91SAM926x_PMC_UHP +-#elif defined(CONFIG_AT91SAM9261) ++#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + #include <asm/arch/at91sam9261.h> + #define AT91_BASE_SPI AT91SAM9261_BASE_SPI0 + #define AT91_ID_UHP AT91SAM9261_ID_UHP +@@ -39,6 +39,12 @@ + #include <asm/arch/at91sam9rl.h> + #define AT91_BASE_SPI AT91SAM9RL_BASE_SPI + #define AT91_ID_UHP AT91SAM9RL_ID_UHP ++#elif defined(CONFIG_AT91SAM9G45) ++#include <asm/arch/at91sam9g45.h> ++#define AT91_BASE_EMAC AT91SAM9G45_BASE_EMAC ++#define AT91_BASE_SPI AT91SAM9G45_BASE_SPI0 ++#define AT91_ID_UHP AT91SAM9G45_ID_UHPHS ++#define AT91_PMC_UHP AT91SAM926x_PMC_UHP + #elif defined(CONFIG_AT91CAP9) + #include <asm/arch/at91cap9.h> + #define AT91_BASE_EMAC AT91CAP9_BASE_EMAC +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/mach-types.h u-boot-1.3.4/include/asm-arm/mach-types.h +--- u-boot-1.3.4-vanilla/include/asm-arm/mach-types.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/asm-arm/mach-types.h 2010-03-25 16:45:59.000000000 -0500 +@@ -1595,7 +1595,13 @@ extern unsigned int __machine_arch_type; + #define MACH_TYPE_P300 1602 + #define MACH_TYPE_XDACOMET 1603 + #define MACH_TYPE_DEXFLEX2 1604 ++#define MACH_TYPE_AT91SAM9G20EK 1624 + #define MACH_TYPE_SFFSDR 1657 ++#define MACH_TYPE_AT91SAM9M10G45EK 1830 ++#define MACH_TYPE_AT91SAM9G10EK 2159 ++#define MACH_TYPE_AT91SAM9G45EKES 2212 ++#define MACH_TYPE_AT91SAM9G20EK_2MMC 2288 ++#define MACH_TYPE_AT91SAM9M10EKES 2509 + + #ifdef CONFIG_ARCH_EBSA110 + # ifdef machine_arch_type +@@ -11701,6 +11707,18 @@ extern unsigned int __machine_arch_type; + # define machine_is_at91sam9261ek() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G10EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G10EK ++# endif ++# define machine_is_at91sam9g10ek() (machine_arch_type == MACH_TYPE_AT91SAM9G10EK) ++#else ++# define machine_is_at91sam9g10ek() (0) ++#endif ++ + #ifdef CONFIG_MACH_LOFT + # ifdef machine_arch_type + # undef machine_arch_type +@@ -20605,6 +20623,69 @@ extern unsigned int __machine_arch_type; + # define machine_is_dexflex2() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G20EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK ++# endif ++# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK) ++#else ++# define machine_is_at91sam9g20ek() (0) ++#endif ++ ++ ++#ifdef CONFIG_MACH_AT91SAM9M10G45EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9M10G45EK ++# endif ++# define machine_is_at91sam9m10g45ek() (machine_arch_type == MACH_TYPE_AT91SAM9M10G45EK) ++#else ++# define machine_is_at91sam9m10g45ek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9G45EKES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G45EKES ++# endif ++# define machine_is_at91sam9g45ekes() (machine_arch_type == MACH_TYPE_AT91SAM9G45EKES) ++#else ++# define machine_is_at91sam9g45ekes() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9G20EK_2MMC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK_2MMC ++# endif ++# define machine_is_at91sam9g20ek_2mmc() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK_2MMC) ++#else ++# define machine_is_at91sam9g20ek_2mmc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9M10EKES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9M10EKES ++# endif ++# define machine_is_at91sam9m10ekes() (machine_arch_type == MACH_TYPE_AT91SAM9M10EKES) ++#else ++# define machine_is_at91sam9m10ekes() (0) ++#endif ++ ++ ++ + /* + * These have not yet been registered + */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9260ek.h u-boot-1.3.4/include/configs/at91sam9260ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9260ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9260ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -127,10 +127,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#undef CFG_USE_DATAFLASH_CS0 +-#define CFG_USE_DATAFLASH_CS1 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH_CS0 + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9261ek.h u-boot-1.3.4/include/configs/at91sam9261ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9261ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9261ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -142,9 +142,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH_CS0 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH_CS0 + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +@@ -159,6 +156,20 @@ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + ++#elif CFG_USE_DATAFLASH_CS3 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS3 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS3 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ + #else /* CFG_USE_NANDFLASH */ + + /* bootstrap + u-boot + env + linux in nandflash */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9263ek.h u-boot-1.3.4/include/configs/at91sam9263ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9263ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9263ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -148,9 +148,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9g10ek.h u-boot-1.3.4/include/configs/at91sam9g10ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9g10ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9g10ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,213 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9G10EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_CPU_NAME "AT91SAM9G10" ++#define AT91_MAIN_CLOCK 266000000 /* from 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 133000000 /* peripheral = main / 2 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/ ++#define CONFIG_AT91SAM9G10EK 1 /* on an AT91SAM9G10EK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++/* LCD */ ++#define CONFIG_LCD 1 ++#define LCD_BPP LCD_COLOR8 ++#define CONFIG_LCD_LOGO 1 ++#undef LCD_TEST_PATTERN ++#define CONFIG_LCD_INFO 1 ++#define CONFIG_LCD_INFO_BELOW_LOGO 1 ++#define CFG_WHITE_ON_BLACK 1 ++#define CONFIG_ATMEL_LCD 1 ++/* #define CONFIG_ATMEL_LCD_BGR555 1 */ ++#define CFG_CONSOLE_IS_IN_ENV 1 ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x1a << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CFG_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_DRIVER_DM9000 1 ++#define CONFIG_DM9000_BASE 0x30000000 ++#define DM9000_IO CONFIG_DM9000_BASE ++#define DM9000_DATA (CONFIG_DM9000_BASE + 4) ++#define CONFIG_DM9000_USE_16BIT 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G10_UHP_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g10" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CFG_USE_DATAFLASH_CS3 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS3 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS3 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro," \ ++ "256k(uboot)ro,128k(env1)ro," \ ++ "128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9g20ek.h u-boot-1.3.4/include/configs/at91sam9g20ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9g20ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9g20ek.h 2010-05-04 13:55:32.000000000 -0500 +@@ -0,0 +1,212 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9G20EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 132096000 /* PLLA = main * 43 / 6 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++#define CONFIG_BOOTDELAY 1 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x22 << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CFG_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_NET 1 ++#define CONFIG_MACB 1 ++#define CONFIG_MII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g20" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CFG_USE_DATAFLASH_CS1 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS1 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}" ++#define CONFIG_BOOTARGS "mem=64M " \ ++ "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock8 " \ ++ "ro rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#define CONFIG_AUTO_COMPLETE 1 ++ ++#define CONFIG_ENV_OVERWRITE 1 ++#define CONFIG_ETHADDR 00:08:00:87:00:02 ++#define CONFIG_IPADDR 192.168.2.1 ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_SERVERIP 192.168.2.2 ++#define CONFIG_HOSTNAME AT91SAM9G20 ++#define CONFIG_LOADADDR 0x21400000 ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "kernel_addr=0x000A0000\0" \ ++ "" ++ ++#define CONFIG_ZERO_BOOTDELAY_CHECK 1 ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9m10g45ek.h u-boot-1.3.4/include/configs/at91sam9m10g45ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9m10g45ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9m10g45ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,217 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_CPU_NAME "AT91SAM9G45" ++#define AT91_MAIN_CLOCK 400000000 /* from 12 MHz crystal */ ++#define AT91_MASTER_CLOCK 133000000 /* peripheral = main / 3 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ ++ ++#ifdef CFG_USE_AT91SAM9M10G45EK ++#define CONFIG_AT91SAM9M10G45EK 1 /* on an AT91SAM9M10G45EK Board */ ++#endif ++ ++#ifdef CFG_USE_AT91SAM9G45EKES ++#define CONFIG_AT91SAM9G45EKES 1 /* on an AT91SAM9G45EKES Board */ ++#endif ++ ++#ifdef CFG_USE_AT91SAM9M10EKES ++#define CONFIG_AT91SAM9M10EKES 1 /* on an AT91SAM9M10EKES Board */ ++#endif ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++/* LCD */ ++//#define CONFIG_LCD 1 ++#undef CONFIG_LCD ++#define LCD_BPP LCD_COLOR8 ++#define CONFIG_LCD_LOGO 1 ++#undef LCD_TEST_PATTERN ++#define CONFIG_LCD_INFO 1 ++#define CONFIG_LCD_INFO_BELOW_LOGO 1 ++#define CFG_WHITE_ON_BLACK 1 ++#define CONFIG_ATMEL_LCD 1 ++#define CONFIG_ATMEL_LCD_BGR555 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x70000000 ++#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 1 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x1a << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NOR flash, if populated */ ++#if 1 ++#define CFG_NO_FLASH 1 ++#else ++#define CFG_FLASH_CFI 1 ++#define CONFIG_FLASH_CFI_DRIVER 1 ++#define PHYS_FLASH_1 0x10000000 ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++#define CFG_MAX_FLASH_SECT 256 ++#define CFG_MAX_FLASH_BANKS 1 ++#endif ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* Ethernet */ ++#define CONFIG_MACB 1 ++/* #define CONFIG_MII 1 */ ++#define CONFIG_RMII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g45" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) "\ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9rlek.h u-boot-1.3.4/include/configs/at91sam9rlek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9rlek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9rlek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -117,9 +117,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/Makefile u-boot-1.3.4/Makefile +--- u-boot-1.3.4-vanilla/Makefile 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/Makefile 2010-05-13 14:00:22.000000000 -0500 +@@ -2353,15 +2353,6 @@ shannon_config : unconfig + at91rm9200dk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + +-at91sam9261ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9 +- +-at91sam9263ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9 +- +-at91sam9rlek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9 +- + cmc_pu2_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + +@@ -2384,8 +2375,175 @@ mp2usb_config : unconfig + at91cap9adk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9 + ++at91sam9260ek_nandflash_config \ ++at91sam9260ek_dataflash_cs0_config \ ++at91sam9260ek_dataflash_cs1_config \ + at91sam9260ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9 ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 ++ ++at91sam9xeek_nandflash_config \ ++at91sam9xeek_dataflash_cs0_config \ ++at91sam9xeek_dataflash_cs1_config \ ++at91sam9xeek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 ++ ++at91sam9g20ek_nandflash_config \ ++at91sam9g20ek_dataflash_cs0_config \ ++at91sam9g20ek_dataflash_cs1_config \ ++at91sam9g20ek_2mmc_nandflash_config \ ++at91sam9g20ek_2mmc_dataflash_cs0_config \ ++at91sam9g20ek_2mmc_dataflash_cs1_config \ ++at91sam9g20ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @if [ "$(findstring _2mmc_,$@)" ] ; then \ ++ echo "#define CONFIG_AT91SAM9G20EK_2MMC 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... AT91SAM9G20EK board with two SD/MMC slots" ; \ ++ else \ ++ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... AT91SAM9G20EK Board" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91sam9 ++ ++at91sam9261ek_nandflash_config \ ++at91sam9261ek_dataflash_cs0_config \ ++at91sam9261ek_dataflash_cs3_config \ ++at91sam9261ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91sam9 ++ ++at91sam9g10ek_nandflash_config \ ++at91sam9g10ek_dataflash_cs0_config \ ++at91sam9g10ek_dataflash_cs3_config \ ++at91sam9g10ek_config : unconfig ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g10ek arm arm926ejs at91sam9g10ek atmel at91sam9 ++ ++at91sam9263ek_nandflash_config \ ++at91sam9263ek_dataflash_config \ ++at91sam9263ek_dataflash_cs0_config \ ++at91sam9263ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91sam9 ++ ++at91sam9rlek_nandflash_config \ ++at91sam9rlek_dataflash_config \ ++at91sam9rlek_dataflash_cs0_config \ ++at91sam9rlek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91sam9 ++ ++at91sam9m10g45ek_nandflash_config \ ++at91sam9m10g45ek_dataflash_config \ ++at91sam9m10g45ek_dataflash_cs0_config \ ++at91sam9m10g45ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 ++ ++at91sam9g45ekes_nandflash_config \ ++at91sam9g45ekes_dataflash_config \ ++at91sam9g45ekes_dataflash_cs0_config \ ++at91sam9g45ekes_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 ++ ++at91sam9m10ekes_nandflash_config \ ++at91sam9m10ekes_dataflash_config \ ++at91sam9m10ekes_dataflash_cs0_config \ ++at91sam9m10ekes_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9M10EKES 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9M10EKES 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 + + ######################################################################## + ## ARM Integrator boards - see doc/README-integrator for more info. +diff -uprN u-boot-1.3.4-vanilla/net/eth.c u-boot-1.3.4/net/eth.c +--- u-boot-1.3.4-vanilla/net/eth.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/net/eth.c 2010-03-25 16:45:59.000000000 -0500 +@@ -287,7 +287,7 @@ int eth_initialize(bd_t *bis) + mcdmafec_initialize(bis); + #endif + #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) ++ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) + at91sam9_eth_initialize(bis); + #endif + diff --git a/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/fw_env.config b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/fw_env.config new file mode 100644 index 0000000..41b9605 --- /dev/null +++ b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/fw_env.config @@ -0,0 +1,7 @@ +# Configuration file for fw_{printenv,setenv} utility. +# Up to two entries are valid, in this case the redundant +# environment sector is assumed present. + +# MTD device name Device offset Env. size Flash sector size +/dev/mtd3 0x0000 0x20000 0x20000 +/dev/mtd4 0x0000 0x20000 0x20000 diff --git a/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/u-boot-1.3.4-mts.patch b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/u-boot-1.3.4-mts.patch new file mode 100644 index 0000000..4d05ba3 --- /dev/null +++ b/multitech/recipes/u-boot/u-boot-1.3.4/mtcdp/u-boot-1.3.4-mts.patch @@ -0,0 +1,3298 @@ +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9260ek/at91sam9260ek.c u-boot-1.3.4/board/atmel/at91sam9260ek/at91sam9260ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9260ek/at91sam9260ek.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/board/atmel/at91sam9260ek/at91sam9260ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -125,6 +125,8 @@ static void at91sam9260ek_spi_hw_init(vo + #ifdef CONFIG_MACB + static void at91sam9260ek_macb_hw_init(void) + { ++ unsigned long rstc; ++ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + +@@ -147,6 +149,8 @@ static void at91sam9260ek_macb_hw_init(v + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | +@@ -159,9 +163,8 @@ static void at91sam9260ek_macb_hw_init(v + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | +- (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ (rstc) | + AT91_RSTC_URSTEN); +- + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9263ek/at91sam9263ek.c u-boot-1.3.4/board/atmel/at91sam9263ek/at91sam9263ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9263ek/at91sam9263ek.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/board/atmel/at91sam9263ek/at91sam9263ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -128,6 +128,8 @@ static void at91sam9263ek_spi_hw_init(vo + #ifdef CONFIG_MACB + static void at91sam9263ek_macb_hw_init(void) + { ++ unsigned long rstc; ++ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + +@@ -145,6 +147,8 @@ static void at91sam9263ek_macb_hw_init(v + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0D << 8)) | +@@ -157,7 +161,7 @@ static void at91sam9263ek_macb_hw_init(v + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | +- (AT91_RSTC_ERSTL & (0x0 << 8)) | ++ (rstc) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/at91sam9g10ek.c u-boot-1.3.4/board/atmel/at91sam9g10ek/at91sam9g10ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/at91sam9g10ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/at91sam9g10ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,281 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/at91sam9261_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#include <lcd.h> ++#include <atmel_lcdc.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g10ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g10ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ /* ++ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); ++ */ ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ /* ++ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); ++ */ ++ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ /* ++ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); ++ */ ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(2)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC15, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++ ++ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g10ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_DRIVER_DM9000 ++static void at91sam9g10ek_dm9000_hw_init(void) ++{ ++ /* Configure SMC CS2 for DM9000 */ ++ /* ++ at91_sys_write(AT91_SMC_SETUP(2), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(2), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); ++ at91_sys_write(AT91_SMC_CYCLE(2), ++ AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); ++ */ ++ at91_sys_write(AT91_SMC_SETUP(2), ++ AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(2), ++ AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) | ++ AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8)); ++ at91_sys_write(AT91_SMC_CYCLE(2), ++ AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20)); ++ at91_sys_write(AT91_SMC_MODE(2), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++ AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | ++ AT91_SMC_TDF_(1)); ++ ++ /* Configure Reset signal as output */ ++ at91_set_gpio_output(AT91_PIN_PC10, 0); ++ ++ /* Configure Interrupt pin as input, no pull-up */ ++ at91_set_gpio_input(AT91_PIN_PC11, 0); ++} ++#endif ++ ++#ifdef CONFIG_LCD ++vidinfo_t panel_info = { ++ vl_col: 240, ++ vl_row: 320, ++ vl_clk: 4965000, ++ vl_sync: ATMEL_LCDC_INVLINE_INVERTED | ++ ATMEL_LCDC_INVFRAME_INVERTED, ++ vl_bpix: 3, ++ vl_tft: 1, ++ vl_hsync_len: 5, ++ vl_left_margin: 1, ++ vl_right_margin:33, ++ vl_vsync_len: 1, ++ vl_upper_margin:1, ++ vl_lower_margin:0, ++ mmio: AT91SAM9261_LCDC_BASE, ++}; ++ ++void lcd_enable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ ++} ++ ++void lcd_disable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ ++} ++ ++static void at91sam9g10ek_lcd_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ ++ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ ++ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ ++ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ ++ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ ++ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ ++ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ ++ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ ++ ++ at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); ++ ++ /* gd->fb_base = AT91SAM9261_SRAM_BASE; */ ++ gd->fb_base = 0x23E00000; ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G10EK-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g10ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g10ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g10ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_DRIVER_DM9000 ++ at91sam9g10ek_dm9000_hw_init(); ++#endif ++#ifdef CONFIG_LCD ++ at91sam9g10ek_lcd_hw_init(); ++#endif ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_DRIVER_DM9000 ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/config.mk u-boot-1.3.4/board/atmel/at91sam9g10ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/led.c u-boot-1.3.4/board/atmel/at91sam9g10ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/led.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,78 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#define RED_LED AT91_PIN_PA23 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ ++#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void yellow_LED_on(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, 0); ++} ++ ++void yellow_LED_off(void) ++{ ++ at91_set_gpio_value(YELLOW_LED, 1); ++} ++ ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ at91_set_gpio_output(YELLOW_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++ at91_set_gpio_value(YELLOW_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/Makefile u-boot-1.3.4/board/atmel/at91sam9g10ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g10ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/nand.c u-boot-1.3.4/board/atmel/at91sam9g10ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9261.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 22) /* our ALE is AD22 */ ++#define MASK_CLE (1 << 21) /* our CLE is AD21 */ ++ ++static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91sam9261ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC15); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91sam9261ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9261ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/partition.c u-boot-1.3.4/board/atmel/at91sam9g10ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g10ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g10ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/at91sam9g20ek.c u-boot-1.3.4/board/atmel/at91sam9g20ek/at91sam9g20ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/at91sam9g20ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/at91sam9g20ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,258 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91sam9260_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91sam9g20ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91sam9g20ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(3)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC13, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91sam9g20ek_spi_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ ++ at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91sam9g20ek_macb_hw_init(void) ++{ ++ unsigned long rstc; ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA17) => PHY normal mode (not Test mode) ++ * ERX0 (PA14) => PHY ADDR0 ++ * ERX1 (PA15) => PHY ADDR1 ++ * ERX2 (PA25) => PHY ADDR2 ++ * ERX3 (PA26) => PHY ADDR3 ++ * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (rstc) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA14) | ++ pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA17) | ++ pin_to_mask(AT91_PIN_PA25) | ++ pin_to_mask(AT91_PIN_PA26) | ++ pin_to_mask(AT91_PIN_PA28), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ ++#if defined(CONFIG_AT91SAM9G20EK) || defined(CONFIG_AT91SAM9G20EK_2MMC) ++ /* ++ * use PA10, PA11 for ETX2, ETX3. ++ * PA23 and PA24 are for TWI EEPROM ++ */ ++ at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ ++#else ++ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ ++#endif ++ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9G20EK-Board */ ++#ifdef CONFIG_AT91SAM9G20EK_2MMC ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; ++#else ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; ++#endif ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91sam9g20ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91sam9g20ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91sam9g20ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91sam9g20ek_macb_hw_init(); ++#endif ++ ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/config.mk u-boot-1.3.4/board/atmel/at91sam9g20ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x23f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/led.c u-boot-1.3.4/board/atmel/at91sam9g20ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/led.c 2010-03-25 18:48:37.000000000 -0500 +@@ -0,0 +1,69 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#ifdef CONFIG_AT91SAM9G20EK_2MMC ++#define RED_LED AT91_PIN_PB31 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PB30 /* this is the user led */ ++#else ++#define RED_LED AT91_PIN_PA31 /* this is the power led */ ++#define GREEN_LED AT91_PIN_PA30 /* this is the user led */ ++#endif ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/Makefile u-boot-1.3.4/board/atmel/at91sam9g20ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9g20ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/nand.c u-boot-1.3.4/board/atmel/at91sam9g20ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9260.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91sam9g20ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91sam9g20ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC13); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91sam9g20ek_nand_hwcontrol; ++ nand->dev_ready = at91sam9g20ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/partition.c u-boot-1.3.4/board/atmel/at91sam9g20ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9g20ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9g20ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,40 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,324 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/sizes.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/at91sam9g45_matrix.h> ++#include <asm/arch/at91sam9_smc.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/at91_rstc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++#include <lcd.h> ++#include <atmel_lcdc.h> ++#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) ++#include <net.h> ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* ------------------------------------------------------------------------- */ ++/* ++ * Miscelaneous platform dependent initialisations ++ */ ++ ++static void at91samm10g45ek_serial_hw_init(void) ++{ ++#ifdef CONFIG_USART0 ++ at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0); ++#endif ++ ++#ifdef CONFIG_USART1 ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1); ++#endif ++ ++#ifdef CONFIG_USART2 ++ at91_set_A_periph(AT91_PIN_PD6, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PD7, 0); /* RXD2 */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2); ++#endif ++ ++#ifdef CONFIG_USART3 /* DBGU */ ++ at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); ++#endif ++} ++ ++#ifdef CONFIG_CMD_NAND ++static void at91samm10g45ek_nand_hw_init(void) ++{ ++ unsigned long csa; ++ ++ /* Enable CS3 */ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, ++ csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA); ++ ++ /* Configure SMC CS3 for NAND/SmartMedia */ ++ at91_sys_write(AT91_SMC_SETUP(3), ++ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | ++ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); ++ at91_sys_write(AT91_SMC_PULSE(3), ++ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) | ++ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2)); ++ at91_sys_write(AT91_SMC_CYCLE(3), ++ AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4)); ++ at91_sys_write(AT91_SMC_MODE(3), ++ AT91_SMC_READMODE | AT91_SMC_WRITEMODE | ++ AT91_SMC_EXNWMODE_DISABLE | ++#ifdef CFG_NAND_DBW_16 ++ AT91_SMC_DBW_16 | ++#else /* CFG_NAND_DBW_8 */ ++ AT91_SMC_DBW_8 | ++#endif ++ AT91_SMC_TDF_(3)); ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC); ++ ++ /* Configure RDY/BSY */ ++ at91_set_gpio_input(AT91_PIN_PC8, 1); ++ ++ /* Enable NandFlash */ ++ at91_set_gpio_output(AT91_PIN_PC14, 1); ++} ++#endif ++ ++#ifdef CONFIG_HAS_DATAFLASH ++static void at91samm10g45ek_spi_hw_init(void) ++{ ++ at91_set_B_periph(AT91_PIN_PB3, 0); /* SPI0_NPCS0 */ ++ ++ at91_set_B_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */ ++ at91_set_B_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ ++ at91_set_B_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0); ++} ++#endif ++ ++#ifdef CONFIG_MACB ++static void at91samm10g45ek_macb_hw_init(void) ++{ ++ unsigned long rstc; ++ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC); ++ ++ /* ++ * Disable pull-up on: ++ * RXDV (PA15) => PHY normal mode (not Test mode) ++ * ERX0 (PA12) => PHY ADDR0 ++ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0 ++ * ++ * PHY has internal pull-down ++ */ ++ writel(pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA12) | ++ pin_to_mask(AT91_PIN_PA13), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); ++ ++ rstc = at91_sys_read(AT91_RSTC_MR); ++ ++ /* Need to reset PHY -> 500ms reset */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (AT91_RSTC_ERSTL & (0x0D << 8)) | ++ AT91_RSTC_URSTEN); ++ ++ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); ++ ++ /* Wait for end hardware reset */ ++ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); ++ ++ /* Restore NRST value */ ++ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | ++ (rstc) | ++ AT91_RSTC_URSTEN); ++ ++ /* Re-enable pull-up */ ++ writel(pin_to_mask(AT91_PIN_PA15) | ++ pin_to_mask(AT91_PIN_PA12) | ++ pin_to_mask(AT91_PIN_PA13), ++ pin_to_controller(AT91_PIN_PA0) + PIO_PUER); ++ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */ ++ ++#ifndef CONFIG_RMII ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */ ++ at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */ ++#endif ++ ++} ++#endif ++ ++#ifdef CONFIG_LCD ++vidinfo_t panel_info = { ++ vl_col: 480, ++ vl_row: 272, ++ vl_clk: 125000, ++ vl_sync: ATMEL_LCDC_INVLINE_NORMAL | ++ ATMEL_LCDC_INVFRAME_NORMAL, ++ vl_bpix: 3, ++ vl_tft: 1, ++ vl_hsync_len: 41, ++ vl_left_margin: 2, ++ vl_right_margin:2, ++ vl_vsync_len: 1, ++ vl_upper_margin:2, ++ vl_lower_margin:2, ++ mmio: AT91SAM9G45_LCDC_BASE, ++}; ++ ++void lcd_enable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PE6, 1); /* power up */ ++} ++ ++void lcd_disable(void) ++{ ++ at91_set_gpio_value(AT91_PIN_PE6, 0); /* power down */ ++} ++ ++static void at91samm10g45ek_lcd_hw_init(void) ++{ ++ at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */ ++ ++ at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */ ++ ++ at91_set_gpio_input(AT91_PIN_PE6, 0); /* LCDDEN */ ++ ++ at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */ ++ at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */ ++ at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */ ++ at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */ ++ at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */ ++ at91_set_B_periph(AT91_PIN_PE20, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */ ++ at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */ ++ at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */ ++ at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */ ++ at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */ ++ at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PE28, 0); /* LCDD21 */ ++ at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */ ++ at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */ ++ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC); ++ ++ gd->fb_base = AT91SAM9G45_SRAM_BASE; ++} ++#endif ++ ++#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) ++extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); ++ ++int board_eth_init(bd_t *bis) ++{ ++ macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00); ++} ++#endif ++ ++int board_init(void) ++{ ++ /* Enable Ctrlc */ ++ console_init_f(); ++ ++ /* arch number of AT91SAM9M10G45EK-Board */ ++#ifdef CONFIG_AT91SAM9M10G45EK ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK; ++#elif defined CONFIG_AT91SAM9G45EKES ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES; ++#elif defined CONFIG_AT91SAM9M10EKES ++ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10EKES; ++#endif ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ at91samm10g45ek_serial_hw_init(); ++#ifdef CONFIG_CMD_NAND ++ at91samm10g45ek_nand_hw_init(); ++#endif ++#ifdef CONFIG_HAS_DATAFLASH ++ at91samm10g45ek_spi_hw_init(); ++#endif ++#ifdef CONFIG_MACB ++ at91samm10g45ek_macb_hw_init(); ++#endif ++ ++#ifdef CONFIG_LCD ++ at91samm10g45ek_lcd_hw_init(); ++#endif ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; ++ return 0; ++} ++ ++#ifdef CONFIG_RESET_PHY_R ++void reset_phy(void) ++{ ++#ifdef CONFIG_MACB ++ /* ++ * Initialize ethernet HW addr prior to starting Linux, ++ * needed for nfsroot ++ */ ++ eth_init(gd->bd); ++#endif ++} ++#endif +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/config.mk u-boot-1.3.4/board/atmel/at91sam9m10g45ek/config.mk +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/config.mk 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/config.mk 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1 @@ ++TEXT_BASE = 0x73f00000 +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/led.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/led.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/led.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/led.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,64 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/at91_pmc.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/io.h> ++ ++#define RED_LED AT91_PIN_PD31 /* this is the user1 led */ ++#define GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ ++ ++void red_LED_on(void) ++{ ++ at91_set_gpio_value(RED_LED, 1); ++} ++ ++void red_LED_off(void) ++{ ++ at91_set_gpio_value(RED_LED, 0); ++} ++ ++void green_LED_on(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 0); ++} ++ ++void green_LED_off(void) ++{ ++ at91_set_gpio_value(GREEN_LED, 1); ++} ++ ++void coloured_LED_init(void) ++{ ++ /* Enable clock */ ++ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE); ++ ++ at91_set_gpio_output(RED_LED, 1); ++ at91_set_gpio_output(GREEN_LED, 1); ++ ++ at91_set_gpio_value(RED_LED, 0); ++ at91_set_gpio_value(GREEN_LED, 1); ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/Makefile u-boot-1.3.4/board/atmel/at91sam9m10g45ek/Makefile +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/Makefile 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/Makefile 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,57 @@ ++# ++# (C) Copyright 2003-2008 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# (C) Copyright 2008 ++# Stelian Pop <stelian.pop@leadtechdesign.com> ++# Lead Tech Design <www.leadtechdesign.com> ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS-y += at91sam9m10g45ek.o ++COBJS-y += led.o ++COBJS-y += partition.o ++COBJS-$(CONFIG_CMD_NAND) += nand.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS-y)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak $(obj).depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/nand.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/nand.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/nand.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/nand.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,79 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <asm/arch/at91sam9g45.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/at91_pio.h> ++ ++#include <nand.h> ++ ++/* ++ * hardware specific access to control-lines ++ */ ++#define MASK_ALE (1 << 21) /* our ALE is AD21 */ ++#define MASK_CLE (1 << 22) /* our CLE is AD22 */ ++ ++static void at91samm10g45ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; ++ ++ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); ++ switch (cmd) { ++ case NAND_CTL_SETCLE: ++ IO_ADDR_W |= MASK_CLE; ++ break; ++ case NAND_CTL_SETALE: ++ IO_ADDR_W |= MASK_ALE; ++ break; ++ case NAND_CTL_CLRNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 1); ++ break; ++ case NAND_CTL_SETNCE: ++ at91_set_gpio_value(AT91_PIN_PC14, 0); ++ break; ++ } ++ this->IO_ADDR_W = (void *) IO_ADDR_W; ++} ++ ++static int at91samm10g45ek_nand_ready(struct mtd_info *mtd) ++{ ++ return at91_get_gpio_value(AT91_PIN_PC8); ++} ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->eccmode = NAND_ECC_SOFT; ++#ifdef CFG_NAND_DBW_16 ++ nand->options = NAND_BUSWIDTH_16; ++#endif ++ nand->hwcontrol = at91samm10g45ek_nand_hwcontrol; ++ nand->dev_ready = at91samm10g45ek_nand_ready; ++ nand->chip_delay = 20; ++ ++ return 0; ++} +diff -uprN u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/partition.c u-boot-1.3.4/board/atmel/at91sam9m10g45ek/partition.c +--- u-boot-1.3.4-vanilla/board/atmel/at91sam9m10g45ek/partition.c 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/board/atmel/at91sam9m10g45ek/partition.c 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,39 @@ ++/* ++ * (C) Copyright 2008 ++ * Ulf Samuelsson <ulf@atmel.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <config.h> ++#include <asm/hardware.h> ++#include <dataflash.h> ++ ++AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; ++ ++struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { ++ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ ++}; ++ ++/*define the area offsets*/ ++dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { ++ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, ++ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, ++ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, ++ {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, ++ {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, ++}; +diff -uprN u-boot-1.3.4-vanilla/cpu/arm926ejs/at91sam9/usb.c u-boot-1.3.4/cpu/arm926ejs/at91sam9/usb.c +--- u-boot-1.3.4-vanilla/cpu/arm926ejs/at91sam9/usb.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/cpu/arm926ejs/at91sam9/usb.c 2010-03-25 16:45:59.000000000 -0500 +@@ -33,7 +33,7 @@ int usb_cpu_init(void) + { + /* Enable USB host clock. */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); +-#ifdef CONFIG_AT91SAM9261 ++#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0); + #else + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); +@@ -46,7 +46,7 @@ int usb_cpu_stop(void) + { + /* Disable USB host clock. */ + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); +-#ifdef CONFIG_AT91SAM9261 ++#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0); + #else + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); +diff -uprN u-boot-1.3.4-vanilla/doc/README.at91 u-boot-1.3.4/doc/README.at91 +--- u-boot-1.3.4-vanilla/doc/README.at91 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/doc/README.at91 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,88 @@ ++Atmel AT91 Evaluation kits ++ ++http://atmel.com/dyn/products/tools.asp?family_id=605#1443 ++ ++------------------------------------------------------------------------------ ++AT91SAM9260EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) ++ 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 1 (default) ++ - Dataflash on SPI chip select 0 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9260ek_config - use data flash (spi cs1) (default) ++ make at91sam9260ek_nandflash_config - use nand flash ++ make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) ++ make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9261EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash ++ 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 (default) ++ - Dataflash on SPI chip select 3 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9261ek_config - use data flash (spi cs0) (default) ++ make at91sam9261ek_nandflash_config - use nand flash ++ make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) ++ make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9263EK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9) ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 (dataflash card) ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9263ek_config - use data flash (spi cs0) (default) ++ make at91sam9263ek_nandflash_config - use nand flash ++ make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) ++ ++ ++------------------------------------------------------------------------------ ++AT91SAM9RLEK ++------------------------------------------------------------------------------ ++ ++Memory map ++ 0x20000000 - 23FFFFFF SDRAM (64 MB) ++ 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash ++ ++Environment variables ++ ++ U-Boot environment variables can be stored at different places: ++ - Dataflash on SPI chip select 0 ++ - Nand flash. ++ ++ You can choose your storage location at config step (here for at91sam9260ek) : ++ make at91sam9263ek_config - use data flash (spi cs0) (default) ++ make at91sam9263ek_nandflash_config - use nand flash ++ make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) +diff -uprN u-boot-1.3.4-vanilla/drivers/net/macb.c u-boot-1.3.4/drivers/net/macb.c +--- u-boot-1.3.4-vanilla/drivers/net/macb.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/drivers/net/macb.c 2010-05-04 14:32:15.000000000 -0500 +@@ -55,7 +55,7 @@ + #define CFG_MACB_RX_RING_SIZE (CFG_MACB_RX_BUFFER_SIZE / 128) + #define CFG_MACB_TX_RING_SIZE 16 + #define CFG_MACB_TX_TIMEOUT 1000 +-#define CFG_MACB_AUTONEG_TIMEOUT 5000000 ++#define CFG_MACB_AUTONEG_TIMEOUT 3000000 + + struct macb_dma_desc { + u32 addr; +@@ -290,11 +290,12 @@ static int macb_recv(struct eth_device * + return 0; + } + +-static void macb_phy_reset(struct macb_device *macb) ++static u16 macb_phy_reset(struct macb_device *macb) + { + struct eth_device *netdev = &macb->netdev; + int i; +- u16 status, adv; ++ u16 status = 0; ++ u16 adv; + + adv = ADVERTISE_CSMA | ADVERTISE_ALL; + macb_mdio_write(macb, MII_ADVERTISE, adv); +@@ -314,6 +315,8 @@ static void macb_phy_reset(struct macb_d + else + printf("%s: Autonegotiation timed out (status=0x%04x)\n", + netdev->name, status); ++ ++ return status; + } + + static int macb_phy_init(struct macb_device *macb) +@@ -334,14 +337,7 @@ static int macb_phy_init(struct macb_dev + status = macb_mdio_read(macb, MII_BMSR); + if (!(status & BMSR_LSTATUS)) { + /* Try to re-negotiate if we don't have link already. */ +- macb_phy_reset(macb); +- +- for (i = 0; i < CFG_MACB_AUTONEG_TIMEOUT / 100; i++) { +- status = macb_mdio_read(macb, MII_BMSR); +- if (status & BMSR_LSTATUS) +- break; +- udelay(100); +- } ++ status = macb_phy_reset(macb); + } + + if (!(status & BMSR_LSTATUS)) { +@@ -414,18 +410,16 @@ static int macb_init(struct eth_device * + + /* choose RMII or MII mode. This depends on the board */ + #ifdef CONFIG_RMII +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); +-#else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, 0); +-#endif + #else +-#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) +- macb_writel(macb, USRIO, MACB_BIT(CLKEN)); ++ macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); ++#endif + #else ++#if defined(CONFIG_AVR32) + macb_writel(macb, USRIO, MACB_BIT(MII)); ++#else ++ macb_writel(macb, USRIO, MACB_BIT(CLKEN)); + #endif + #endif /* CONFIG_RMII */ + +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,135 @@ ++/* ++ * Chip-specific header file for the AT91SAM9M1x family ++ * ++ * Copyright (C) 2008 Atmel Corporation. ++ * ++ * Common definitions. ++ * Based on AT91SAM9G45 preliminary datasheet. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91SAM9G45_H ++#define AT91SAM9G45_H ++ ++/* ++ * Peripheral identifiers/interrupts. ++ */ ++#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ ++#define AT91_ID_SYS 1 /* System Controller Interrupt */ ++#define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ ++#define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ ++#define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ ++#define AT91SAM9G45_ID_PIODE 5 /* Parallel I/O Controller D and E */ ++#define AT91SAM9G45_ID_TRNG 6 /* True Random Number Generator */ ++#define AT91SAM9G45_ID_US0 7 /* USART 0 */ ++#define AT91SAM9G45_ID_US1 8 /* USART 1 */ ++#define AT91SAM9G45_ID_US2 9 /* USART 2 */ ++#define AT91SAM9G45_ID_US3 10 /* USART 3 */ ++#define AT91SAM9G45_ID_MCI0 11 /* High Speed Multimedia Card Interface 0 */ ++#define AT91SAM9G45_ID_TWI0 12 /* Two-Wire Interface 0 */ ++#define AT91SAM9G45_ID_TWI1 13 /* Two-Wire Interface 1 */ ++#define AT91SAM9G45_ID_SPI0 14 /* Serial Peripheral Interface 0 */ ++#define AT91SAM9G45_ID_SPI1 15 /* Serial Peripheral Interface 1 */ ++#define AT91SAM9G45_ID_SSC0 16 /* Synchronous Serial Controller 0 */ ++#define AT91SAM9G45_ID_SSC1 17 /* Synchronous Serial Controller 1 */ ++#define AT91SAM9G45_ID_TCB 18 /* Timer Counter 0, 1, 2, 3, 4 and 5 */ ++#define AT91SAM9G45_ID_PWMC 19 /* Pulse Width Modulation Controller */ ++#define AT91SAM9G45_ID_TSC 20 /* Touch Screen ADC Controller */ ++#define AT91SAM9G45_ID_DMA 21 /* DMA Controller */ ++#define AT91SAM9G45_ID_UHPHS 22 /* USB Host High Speed */ ++#define AT91SAM9G45_ID_LCDC 23 /* LCD Controller */ ++#define AT91SAM9G45_ID_AC97C 24 /* AC97 Controller */ ++#define AT91SAM9G45_ID_EMAC 25 /* Ethernet MAC */ ++#define AT91SAM9G45_ID_ISI 26 /* Image Sensor Interface */ ++#define AT91SAM9G45_ID_UDPHS 27 /* USB Device High Speed */ ++#define AT91SAM9G45_ID_AESTDESSHA 28 /* AES + T-DES + SHA */ ++#define AT91SAM9G45_ID_MCI1 29 /* High Speed Multimedia Card Interface 1 */ ++#define AT91SAM9G45_ID_VDEC 30 /* Video Decoder */ ++#define AT91SAM9G45_ID_IRQ0 31 /* Advanced Interrupt Controller */ ++ ++/* ++ * User Peripheral physical base addresses. ++ */ ++#define AT91SAM9G45_BASE_UDPHS 0xfff78000 ++#define AT91SAM9G45_BASE_TC0 0xfff7c000 ++#define AT91SAM9G45_BASE_TC1 0xfff7c040 ++#define AT91SAM9G45_BASE_TC2 0xfff7c080 ++#define AT91SAM9G45_BASE_MCI0 0xfff80000 ++#define AT91SAM9G45_BASE_TWI0 0xfff84000 ++#define AT91SAM9G45_BASE_TWI1 0xfff88000 ++#define AT91SAM9G45_BASE_US0 0xfff8c000 ++#define AT91SAM9G45_BASE_US1 0xfff90000 ++#define AT91SAM9G45_BASE_US2 0xfff94000 ++#define AT91SAM9G45_BASE_US3 0xfff98000 ++#define AT91SAM9G45_BASE_SSC0 0xfff9c000 ++#define AT91SAM9G45_BASE_SSC1 0xfffa0000 ++#define AT91SAM9G45_BASE_SPI0 0xfffa4000 ++#define AT91SAM9G45_BASE_SPI1 0xfffa8000 ++#define AT91SAM9G45_BASE_AC97C 0xfffac000 ++#define AT91SAM9G45_BASE_TSC 0xfffb0000 ++#define AT91SAM9G45_BASE_ISI 0xfffb4000 ++#define AT91SAM9G45_BASE_PWMC 0xfffb8000 ++#define AT91SAM9G45_BASE_EMAC 0xfffbc000 ++#define AT91SAM9G45_BASE_AES 0xfffc0000 ++#define AT91SAM9G45_BASE_TDES 0xfffc4000 ++#define AT91SAM9G45_BASE_SHA 0xfffc8000 ++#define AT91SAM9G45_BASE_TRNG 0xfffcc000 ++#define AT91SAM9G45_BASE_MCI1 0xfffd0000 ++#define AT91SAM9G45_BASE_TC3 0xfffd4000 ++#define AT91SAM9G45_BASE_TC4 0xfffd4040 ++#define AT91SAM9G45_BASE_TC5 0xfffd4080 ++#define AT91_BASE_SYS 0xffffe200 ++ ++/* ++ * System Peripherals (offset from AT91_BASE_SYS) ++ */ ++#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) ++#define AT91_DDRSDRC1 (0xffffe400 - AT91_BASE_SYS) ++#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) ++#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) ++#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) ++#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) ++#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) ++#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) ++#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) ++#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) ++#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) ++#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) ++#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS) ++#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) ++#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) ++#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) ++#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) ++#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) ++#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) ++#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) ++#define AT91_RTC (0xfffffdb0 - AT91_BASE_SYS) ++ ++#define AT91_USART0 AT91SAM9G45_BASE_US0 ++#define AT91_USART1 AT91SAM9G45_BASE_US1 ++#define AT91_USART2 AT91SAM9G45_BASE_US2 ++#define AT91_USART3 AT91SAM9G45_BASE_US3 ++ ++/* ++ * Internal Memory. ++ */ ++#define AT91SAM9G45_SRAM_BASE 0x00300000 /* Internal SRAM base address */ ++#define AT91SAM9G45_SRAM_SIZE SZ_64K /* Internal SRAM size (64Kb) */ ++ ++#define AT91SAM9G45_ROM_BASE 0x00400000 /* Internal ROM base address */ ++#define AT91SAM9G45_ROM_SIZE SZ_64K /* Internal ROM size (64Kb) */ ++ ++#define AT91SAM9G45_LCDC_BASE 0x00500000 /* LCD Controller */ ++#define AT91SAM9G45_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ ++#define AT91SAM9G45_HCI_BASE 0x00700000 /* USB Host controller (OHCI) */ ++#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ ++#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ ++ ++#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 ++ ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/at91sam9g45_matrix.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,153 @@ ++/* ++ * Matrix-centric header file for the AT91SAM9M1x family ++ * ++ * Copyright (C) 2008 Atmel Corporation. ++ * ++ * Memory Controllers (MATRIX, EBI) - System peripherals registers. ++ * Based on AT91SAM9G45 preliminary datasheet. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef AT91SAM9G45_MATRIX_H ++#define AT91SAM9G45_MATRIX_H ++ ++#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ ++#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ ++#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ ++#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ ++#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ ++#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ ++#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ ++#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ ++#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ ++#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ ++#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ ++#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ ++#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ ++#define AT91_MATRIX_ULBT_INFINITE (0 << 0) ++#define AT91_MATRIX_ULBT_SINGLE (1 << 0) ++#define AT91_MATRIX_ULBT_FOUR (2 << 0) ++#define AT91_MATRIX_ULBT_EIGHT (3 << 0) ++#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) ++#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0) ++#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0) ++#define AT91_MATRIX_ULBT_128 (7 << 0) ++ ++#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ ++#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ ++#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ ++#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ ++#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ ++#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ ++#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ ++#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ ++#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */ ++#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ ++#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) ++#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) ++#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ ++ ++#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ ++#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ ++#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ ++#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ ++#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ ++#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ ++#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ ++#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ ++#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ ++#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ ++#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ ++#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ ++#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ ++#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ ++#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ ++#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ ++#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ ++#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ ++#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ ++#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ ++#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ ++#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ ++#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ ++#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ ++#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ ++#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ ++#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ ++#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ ++ ++#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ ++#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ ++#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ ++#define AT91_MATRIX_RCB2 (1 << 2) ++#define AT91_MATRIX_RCB3 (1 << 3) ++#define AT91_MATRIX_RCB4 (1 << 4) ++#define AT91_MATRIX_RCB5 (1 << 5) ++#define AT91_MATRIX_RCB6 (1 << 6) ++#define AT91_MATRIX_RCB7 (1 << 7) ++#define AT91_MATRIX_RCB8 (1 << 8) ++#define AT91_MATRIX_RCB9 (1 << 9) ++#define AT91_MATRIX_RCB10 (1 << 10) ++#define AT91_MATRIX_RCB11 (1 << 11) ++ ++#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */ ++#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ ++#define AT91_MATRIX_ITCM_0 (0 << 0) ++#define AT91_MATRIX_ITCM_32 (6 << 0) ++#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ ++#define AT91_MATRIX_DTCM_0 (0 << 4) ++#define AT91_MATRIX_DTCM_32 (6 << 4) ++#define AT91_MATRIX_DTCM_64 (7 << 4) ++#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */ ++#define AT91_MATRIX_TCM_NO_WS (0x0 << 11) ++#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11) ++ ++#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */ ++#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */ ++#define AT91C_VDEC_SEL_OFF (0 << 0) ++#define AT91C_VDEC_SEL_ON (1 << 0) ++ ++#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */ ++#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ ++#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) ++#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1) ++#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ ++#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) ++#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) ++#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ ++#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) ++#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4) ++#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ ++#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) ++#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5) ++#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ ++#define AT91_MATRIX_EBI_DBPU_ON (0 << 8) ++#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8) ++#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ ++#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) ++#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) ++#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */ ++#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17) ++#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17) ++#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */ ++#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18) ++#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18) ++ ++#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */ ++#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */ ++#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0) ++#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0) ++#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */ ++ ++#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */ ++#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */ ++#define AT91_MATRIX_WPSR_NO_WPV (0 << 0) ++#define AT91_MATRIX_WPSR_WPV (1 << 0) ++#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */ ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/hardware.h u-boot-1.3.4/include/asm-arm/arch-at91sam9/hardware.h +--- u-boot-1.3.4-vanilla/include/asm-arm/arch-at91sam9/hardware.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/asm-arm/arch-at91sam9/hardware.h 2010-03-25 16:45:59.000000000 -0500 +@@ -18,13 +18,13 @@ + + #if defined(CONFIG_AT91RM9200) + #include <asm/arch/at91rm9200.h> +-#elif defined(CONFIG_AT91SAM9260) ++#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20) + #include <asm/arch/at91sam9260.h> + #define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC + #define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 + #define AT91_ID_UHP AT91SAM9260_ID_UHP + #define AT91_PMC_UHP AT91SAM926x_PMC_UHP +-#elif defined(CONFIG_AT91SAM9261) ++#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) + #include <asm/arch/at91sam9261.h> + #define AT91_BASE_SPI AT91SAM9261_BASE_SPI0 + #define AT91_ID_UHP AT91SAM9261_ID_UHP +@@ -39,6 +39,12 @@ + #include <asm/arch/at91sam9rl.h> + #define AT91_BASE_SPI AT91SAM9RL_BASE_SPI + #define AT91_ID_UHP AT91SAM9RL_ID_UHP ++#elif defined(CONFIG_AT91SAM9G45) ++#include <asm/arch/at91sam9g45.h> ++#define AT91_BASE_EMAC AT91SAM9G45_BASE_EMAC ++#define AT91_BASE_SPI AT91SAM9G45_BASE_SPI0 ++#define AT91_ID_UHP AT91SAM9G45_ID_UHPHS ++#define AT91_PMC_UHP AT91SAM926x_PMC_UHP + #elif defined(CONFIG_AT91CAP9) + #include <asm/arch/at91cap9.h> + #define AT91_BASE_EMAC AT91CAP9_BASE_EMAC +diff -uprN u-boot-1.3.4-vanilla/include/asm-arm/mach-types.h u-boot-1.3.4/include/asm-arm/mach-types.h +--- u-boot-1.3.4-vanilla/include/asm-arm/mach-types.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/asm-arm/mach-types.h 2010-03-25 16:45:59.000000000 -0500 +@@ -1595,7 +1595,13 @@ extern unsigned int __machine_arch_type; + #define MACH_TYPE_P300 1602 + #define MACH_TYPE_XDACOMET 1603 + #define MACH_TYPE_DEXFLEX2 1604 ++#define MACH_TYPE_AT91SAM9G20EK 1624 + #define MACH_TYPE_SFFSDR 1657 ++#define MACH_TYPE_AT91SAM9M10G45EK 1830 ++#define MACH_TYPE_AT91SAM9G10EK 2159 ++#define MACH_TYPE_AT91SAM9G45EKES 2212 ++#define MACH_TYPE_AT91SAM9G20EK_2MMC 2288 ++#define MACH_TYPE_AT91SAM9M10EKES 2509 + + #ifdef CONFIG_ARCH_EBSA110 + # ifdef machine_arch_type +@@ -11701,6 +11707,18 @@ extern unsigned int __machine_arch_type; + # define machine_is_at91sam9261ek() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G10EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G10EK ++# endif ++# define machine_is_at91sam9g10ek() (machine_arch_type == MACH_TYPE_AT91SAM9G10EK) ++#else ++# define machine_is_at91sam9g10ek() (0) ++#endif ++ + #ifdef CONFIG_MACH_LOFT + # ifdef machine_arch_type + # undef machine_arch_type +@@ -20605,6 +20623,69 @@ extern unsigned int __machine_arch_type; + # define machine_is_dexflex2() (0) + #endif + ++#ifdef CONFIG_MACH_AT91SAM9G20EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK ++# endif ++# define machine_is_at91sam9g20ek() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK) ++#else ++# define machine_is_at91sam9g20ek() (0) ++#endif ++ ++ ++#ifdef CONFIG_MACH_AT91SAM9M10G45EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9M10G45EK ++# endif ++# define machine_is_at91sam9m10g45ek() (machine_arch_type == MACH_TYPE_AT91SAM9M10G45EK) ++#else ++# define machine_is_at91sam9m10g45ek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9G45EKES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G45EKES ++# endif ++# define machine_is_at91sam9g45ekes() (machine_arch_type == MACH_TYPE_AT91SAM9G45EKES) ++#else ++# define machine_is_at91sam9g45ekes() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9G20EK_2MMC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9G20EK_2MMC ++# endif ++# define machine_is_at91sam9g20ek_2mmc() (machine_arch_type == MACH_TYPE_AT91SAM9G20EK_2MMC) ++#else ++# define machine_is_at91sam9g20ek_2mmc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9M10EKES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9M10EKES ++# endif ++# define machine_is_at91sam9m10ekes() (machine_arch_type == MACH_TYPE_AT91SAM9M10EKES) ++#else ++# define machine_is_at91sam9m10ekes() (0) ++#endif ++ ++ ++ + /* + * These have not yet been registered + */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9260ek.h u-boot-1.3.4/include/configs/at91sam9260ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9260ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9260ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -127,10 +127,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#undef CFG_USE_DATAFLASH_CS0 +-#define CFG_USE_DATAFLASH_CS1 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH_CS0 + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9261ek.h u-boot-1.3.4/include/configs/at91sam9261ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9261ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9261ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -142,9 +142,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH_CS0 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH_CS0 + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +@@ -159,6 +156,20 @@ + "mtdparts=at91_nand:-(root) " \ + "rw rootfstype=jffs2" + ++#elif CFG_USE_DATAFLASH_CS3 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS3 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS3 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ + #else /* CFG_USE_NANDFLASH */ + + /* bootstrap + u-boot + env + linux in nandflash */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9263ek.h u-boot-1.3.4/include/configs/at91sam9263ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9263ek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9263ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -148,9 +148,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9g10ek.h u-boot-1.3.4/include/configs/at91sam9g10ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9g10ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9g10ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,213 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9G10EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_CPU_NAME "AT91SAM9G10" ++#define AT91_MAIN_CLOCK 266000000 /* from 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 133000000 /* peripheral = main / 2 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G10 1 /* It's an Atmel AT91SAM9G10 SoC*/ ++#define CONFIG_AT91SAM9G10EK 1 /* on an AT91SAM9G10EK Board */ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++/* LCD */ ++#define CONFIG_LCD 1 ++#define LCD_BPP LCD_COLOR8 ++#define CONFIG_LCD_LOGO 1 ++#undef LCD_TEST_PATTERN ++#define CONFIG_LCD_INFO 1 ++#define CONFIG_LCD_INFO_BELOW_LOGO 1 ++#define CFG_WHITE_ON_BLACK 1 ++#define CONFIG_ATMEL_LCD 1 ++/* #define CONFIG_ATMEL_LCD_BGR555 1 */ ++#define CFG_CONSOLE_IS_IN_ENV 1 ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* CS3 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x1a << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CFG_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_DRIVER_DM9000 1 ++#define CONFIG_DM9000_BASE 0x30000000 ++#define DM9000_IO CONFIG_DM9000_BASE ++#define DM9000_DATA (CONFIG_DM9000_BASE + 4) ++#define CONFIG_DM9000_USE_16BIT 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G10_UHP_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g10" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CFG_USE_DATAFLASH_CS3 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS3 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS3 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro," \ ++ "256k(uboot)ro,128k(env1)ro," \ ++ "128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9g20ek.h u-boot-1.3.4/include/configs/at91sam9g20ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9g20ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9g20ek.h 2010-05-04 13:55:32.000000000 -0500 +@@ -0,0 +1,212 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9G20EK board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ ++#define AT91_MASTER_CLOCK 132096000 /* PLLA = main * 43 / 6 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G20 1 /* It's an Atmel AT91SAM9G20 SoC*/ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++#define CONFIG_BOOTDELAY 1 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x20000000 ++#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 2 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x22 << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* NOR flash - no real flash on this board */ ++#define CFG_NO_FLASH 1 ++ ++/* Ethernet */ ++#define CONFIG_NET 1 ++#define CONFIG_MACB 1 ++#define CONFIG_MII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9G20_UHP_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g20" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH_CS0 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#elif CFG_USE_DATAFLASH_CS1 ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS1 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xD0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nboot.jffs2 ${loadaddr} 0 ${kernel_addr}; bootm ${loadaddr}" ++#define CONFIG_BOOTARGS "mem=64M " \ ++ "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock8 " \ ++ "ro rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#define CONFIG_AUTO_COMPLETE 1 ++ ++#define CONFIG_ENV_OVERWRITE 1 ++#define CONFIG_ETHADDR 00:08:00:87:00:02 ++#define CONFIG_IPADDR 192.168.2.1 ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_SERVERIP 192.168.2.2 ++#define CONFIG_HOSTNAME AT91SAM9G20 ++#define CONFIG_LOADADDR 0x21400000 ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "kernel_addr=0x000A0000\0" \ ++ "" ++ ++#define CONFIG_ZERO_BOOTDELAY_CHECK 1 ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9m10g45ek.h u-boot-1.3.4/include/configs/at91sam9m10g45ek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9m10g45ek.h 1969-12-31 17:00:00.000000000 -0700 ++++ u-boot-1.3.4/include/configs/at91sam9m10g45ek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -0,0 +1,217 @@ ++/* ++ * (C) Copyright 2007-2008 ++ * Stelian Pop <stelian.pop@leadtechdesign.com> ++ * Lead Tech Design <www.leadtechdesign.com> ++ * ++ * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES). ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* ARM asynchronous clock */ ++#define AT91_CPU_NAME "AT91SAM9G45" ++#define AT91_MAIN_CLOCK 400000000 /* from 12 MHz crystal */ ++#define AT91_MASTER_CLOCK 133000000 /* peripheral = main / 3 */ ++#define CFG_HZ 1000000 /* 1us resolution */ ++ ++#define AT91_SLOW_CLOCK 32768 /* slow clock */ ++ ++#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ ++#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/ ++ ++#ifdef CFG_USE_AT91SAM9M10G45EK ++#define CONFIG_AT91SAM9M10G45EK 1 /* on an AT91SAM9M10G45EK Board */ ++#endif ++ ++#ifdef CFG_USE_AT91SAM9G45EKES ++#define CONFIG_AT91SAM9G45EKES 1 /* on an AT91SAM9G45EKES Board */ ++#endif ++ ++#ifdef CFG_USE_AT91SAM9M10EKES ++#define CONFIG_AT91SAM9M10EKES 1 /* on an AT91SAM9M10EKES Board */ ++#endif ++ ++#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_INITRD_TAG 1 ++ ++#define CONFIG_SKIP_LOWLEVEL_INIT ++#define CONFIG_SKIP_RELOCATE_UBOOT ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_ATMEL_USART 1 ++#undef CONFIG_USART0 ++#undef CONFIG_USART1 ++#undef CONFIG_USART2 ++#define CONFIG_USART3 1 /* USART 3 is DBGU */ ++ ++/* LCD */ ++//#define CONFIG_LCD 1 ++#undef CONFIG_LCD ++#define LCD_BPP LCD_COLOR8 ++#define CONFIG_LCD_LOGO 1 ++#undef LCD_TEST_PATTERN ++#define CONFIG_LCD_INFO 1 ++#define CONFIG_LCD_INFO_BELOW_LOGO 1 ++#define CFG_WHITE_ON_BLACK 1 ++#define CONFIG_ATMEL_LCD 1 ++#define CONFIG_ATMEL_LCD_BGR555 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++ ++#define CONFIG_BOOTDELAY 3 ++ ++/* ++ * BOOTP options ++ */ ++#define CONFIG_BOOTP_BOOTFILESIZE 1 ++#define CONFIG_BOOTP_BOOTPATH 1 ++#define CONFIG_BOOTP_GATEWAY 1 ++#define CONFIG_BOOTP_HOSTNAME 1 ++ ++/* ++ * Command line configuration. ++ */ ++#include <config_cmd_default.h> ++#undef CONFIG_CMD_BDI ++#undef CONFIG_CMD_IMI ++#undef CONFIG_CMD_AUTOSCRIPT ++#undef CONFIG_CMD_FPGA ++#undef CONFIG_CMD_LOADS ++#undef CONFIG_CMD_IMLS ++ ++#define CONFIG_CMD_PING 1 ++#define CONFIG_CMD_DHCP 1 ++#define CONFIG_CMD_NAND 1 ++#define CONFIG_CMD_USB 1 ++ ++/* SDRAM */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM 0x70000000 ++#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ ++ ++/* DataFlash */ ++#define CONFIG_HAS_DATAFLASH 1 ++#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) ++#define CFG_MAX_DATAFLASH_BANKS 1 ++#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ ++#define AT91_SPI_CLK 15000000 ++#define DATAFLASH_TCSS (0x1a << 16) ++#define DATAFLASH_TCHS (0x1 << 24) ++ ++/* NOR flash, if populated */ ++#if 1 ++#define CFG_NO_FLASH 1 ++#else ++#define CFG_FLASH_CFI 1 ++#define CONFIG_FLASH_CFI_DRIVER 1 ++#define PHYS_FLASH_1 0x10000000 ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++#define CFG_MAX_FLASH_SECT 256 ++#define CFG_MAX_FLASH_BANKS 1 ++#endif ++ ++/* NAND flash */ ++#define NAND_MAX_CHIPS 1 ++#define CFG_MAX_NAND_DEVICE 1 ++#define CFG_NAND_BASE 0x40000000 ++#define CFG_NAND_DBW_8 1 ++ ++/* Ethernet */ ++#define CONFIG_MACB 1 ++/* #define CONFIG_MII 1 */ ++#define CONFIG_RMII 1 ++#define CONFIG_NET_MULTI 1 ++#define CONFIG_NET_RETRY_COUNT 20 ++#define CONFIG_RESET_PHY_R 1 ++ ++/* USB */ ++#define CONFIG_USB_OHCI_NEW 1 ++#define LITTLEENDIAN 1 ++#define CONFIG_DOS_PARTITION 1 ++#define CFG_USB_OHCI_CPU_INIT 1 ++#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */ ++#define CFG_USB_OHCI_SLOT_NAME "at91sam9g45" ++#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 ++#define CONFIG_USB_STORAGE 1 ++ ++#define CFG_LOAD_ADDR 0x22000000 /* load address */ ++ ++#define CFG_MEMTEST_START PHYS_SDRAM ++#define CFG_MEMTEST_END 0x23e00000 ++ ++#ifdef CFG_USE_DATAFLASH ++ ++/* bootstrap + u-boot + env + linux in dataflash on CS0 */ ++#define CFG_ENV_IS_IN_DATAFLASH 1 ++#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) ++#define CFG_ENV_OFFSET 0x4200 ++#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) ++#define CFG_ENV_SIZE 0x4200 ++#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock0 " \ ++ "mtdparts=at91_nand:-(root) "\ ++ "rw rootfstype=jffs2" ++ ++#else /* CFG_USE_NANDFLASH */ ++ ++/* bootstrap + u-boot + env + linux in nandflash */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET 0x60000 ++#define CFG_ENV_OFFSET_REDUND 0x80000 ++#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ ++#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" ++#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ ++ "root=/dev/mtdblock5 " \ ++ "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ ++ "rw rootfstype=jffs2" ++ ++#endif ++ ++#define CONFIG_BAUDRATE 115200 ++#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } ++ ++#define CFG_PROMPT "U-Boot> " ++#define CFG_CBSIZE 256 ++#define CFG_MAXARGS 16 ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_LONGHELP 1 ++#define CONFIG_CMDLINE_EDITING 1 ++ ++#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) ++#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ ++ ++#define CONFIG_STACKSIZE (32*1024) /* regular stack */ ++ ++#ifdef CONFIG_USE_IRQ ++#error CONFIG_USE_IRQ not supported ++#endif ++ ++#endif +diff -uprN u-boot-1.3.4-vanilla/include/configs/at91sam9rlek.h u-boot-1.3.4/include/configs/at91sam9rlek.h +--- u-boot-1.3.4-vanilla/include/configs/at91sam9rlek.h 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/include/configs/at91sam9rlek.h 2010-03-25 16:45:59.000000000 -0500 +@@ -117,9 +117,6 @@ + #define CFG_MEMTEST_START PHYS_SDRAM + #define CFG_MEMTEST_END 0x23e00000 + +-#define CFG_USE_DATAFLASH 1 +-#undef CFG_USE_NANDFLASH +- + #ifdef CFG_USE_DATAFLASH + + /* bootstrap + u-boot + env + linux in dataflash on CS0 */ +diff -uprN u-boot-1.3.4-vanilla/Makefile u-boot-1.3.4/Makefile +--- u-boot-1.3.4-vanilla/Makefile 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/Makefile 2010-05-13 14:00:22.000000000 -0500 +@@ -2353,15 +2353,6 @@ shannon_config : unconfig + at91rm9200dk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 + +-at91sam9261ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9261ek atmel at91sam9 +- +-at91sam9263ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9263ek atmel at91sam9 +- +-at91sam9rlek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9rlek atmel at91sam9 +- + cmc_pu2_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 + +@@ -2384,8 +2375,175 @@ mp2usb_config : unconfig + at91cap9adk_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9 + ++at91sam9260ek_nandflash_config \ ++at91sam9260ek_dataflash_cs0_config \ ++at91sam9260ek_dataflash_cs1_config \ + at91sam9260ek_config : unconfig +- @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9 ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 ++ ++at91sam9xeek_nandflash_config \ ++at91sam9xeek_dataflash_cs0_config \ ++at91sam9xeek_dataflash_cs1_config \ ++at91sam9xeek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @$(MKCONFIG) -n at91sam9xeek -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91sam9 ++ ++at91sam9g20ek_nandflash_config \ ++at91sam9g20ek_dataflash_cs0_config \ ++at91sam9g20ek_dataflash_cs1_config \ ++at91sam9g20ek_2mmc_nandflash_config \ ++at91sam9g20ek_2mmc_dataflash_cs0_config \ ++at91sam9g20ek_2mmc_dataflash_cs1_config \ ++at91sam9g20ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS1" ; \ ++ fi; ++ @if [ "$(findstring _2mmc_,$@)" ] ; then \ ++ echo "#define CONFIG_AT91SAM9G20EK_2MMC 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... AT91SAM9G20EK board with two SD/MMC slots" ; \ ++ else \ ++ echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... AT91SAM9G20EK Board" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g20ek arm arm926ejs at91sam9g20ek atmel at91sam9 ++ ++at91sam9261ek_nandflash_config \ ++at91sam9261ek_dataflash_cs0_config \ ++at91sam9261ek_dataflash_cs3_config \ ++at91sam9261ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91sam9 ++ ++at91sam9g10ek_nandflash_config \ ++at91sam9g10ek_dataflash_cs0_config \ ++at91sam9g10ek_dataflash_cs3_config \ ++at91sam9g10ek_config : unconfig ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ ++ echo "#define CFG_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9g10ek arm arm926ejs at91sam9g10ek atmel at91sam9 ++ ++at91sam9263ek_nandflash_config \ ++at91sam9263ek_dataflash_config \ ++at91sam9263ek_dataflash_cs0_config \ ++at91sam9263ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91sam9 ++ ++at91sam9rlek_nandflash_config \ ++at91sam9rlek_dataflash_config \ ++at91sam9rlek_dataflash_cs0_config \ ++at91sam9rlek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91sam9 ++ ++at91sam9m10g45ek_nandflash_config \ ++at91sam9m10g45ek_dataflash_config \ ++at91sam9m10g45ek_dataflash_cs0_config \ ++at91sam9m10g45ek_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 ++ ++at91sam9g45ekes_nandflash_config \ ++at91sam9g45ekes_dataflash_config \ ++at91sam9g45ekes_dataflash_cs0_config \ ++at91sam9g45ekes_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 ++ ++at91sam9m10ekes_nandflash_config \ ++at91sam9m10ekes_dataflash_config \ ++at91sam9m10ekes_dataflash_cs0_config \ ++at91sam9m10ekes_config : unconfig ++ @mkdir -p $(obj)include ++ @if [ "$(findstring _nandflash,$@)" ] ; then \ ++ echo "#define CFG_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in NAND FLASH" ; \ ++ echo "#define CFG_USE_AT91SAM9M10EKES 1" >>$(obj)include/config.h ; \ ++ else \ ++ echo "#define CFG_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ ++ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ ++ echo "#define CFG_USE_AT91SAM9M10EKES 1" >>$(obj)include/config.h ; \ ++ fi; ++ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91sam9 + + ######################################################################## + ## ARM Integrator boards - see doc/README-integrator for more info. +diff -uprN u-boot-1.3.4-vanilla/net/eth.c u-boot-1.3.4/net/eth.c +--- u-boot-1.3.4-vanilla/net/eth.c 2008-08-12 09:08:38.000000000 -0500 ++++ u-boot-1.3.4/net/eth.c 2010-03-25 16:45:59.000000000 -0500 +@@ -287,7 +287,7 @@ int eth_initialize(bd_t *bis) + mcdmafec_initialize(bis); + #endif + #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ +- defined(CONFIG_AT91SAM9263) ++ defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) + at91sam9_eth_initialize(bis); + #endif + diff --git a/multitech/recipes/u-boot/u-boot_1.3.4.bb b/multitech/recipes/u-boot/u-boot_1.3.4.bb new file mode 100644 index 0000000..0bb0b45 --- /dev/null +++ b/multitech/recipes/u-boot/u-boot_1.3.4.bb @@ -0,0 +1,34 @@ +require recipes/u-boot/u-boot.inc + +PR = "r7" +ALLOW_EMPTY = 1 + +SRC_URI = "ftp://ftp.denx.de/pub/u-boot/u-boot-${PV}.tar.bz2" + +SRC_URI_append_mtcdp = "\ + file://u-boot-${PV}-mts.patch \ + file://fw_env.config \ +" + +SRC_URI_append_mtcdp-embedded = "\ + file://u-boot-${PV}-mts.patch \ + file://fw_env.config \ +" + +TARGET_LDFLAGS = "" + +inherit base + +FILES_${PN} = " \ + ${base_sbindir}/fw_setenv \ + ${base_sbindir}/fw_printenv \ +" + +FILES_${PN}_append_mtcdp = "${sysconfdir}/fw_env.config" +FILES_${PN}_append_mtcdp-embedded = "${sysconfdir}/fw_env.config" + +# Don't override install if you want to install any of the U-Boot tools +do_install () { + echo "nothing to install" +} + diff --git a/multitech/recipes/udev/udev-141/corecdp/default b/multitech/recipes/udev/udev-141/corecdp/default new file mode 100644 index 0000000..d0050b8 --- /dev/null +++ b/multitech/recipes/udev/udev-141/corecdp/default @@ -0,0 +1,4 @@ +# Default for /etc/init.d/udev + +# Comment this out to disable device cache +#DEVCACHE="/etc/dev.tar" diff --git a/multitech/recipes/udev/udev-165/corecdp/default b/multitech/recipes/udev/udev-165/corecdp/default new file mode 100644 index 0000000..d0050b8 --- /dev/null +++ b/multitech/recipes/udev/udev-165/corecdp/default @@ -0,0 +1,4 @@ +# Default for /etc/init.d/udev + +# Comment this out to disable device cache +#DEVCACHE="/etc/dev.tar" diff --git a/multitech/recipes/udev/udev_165.bbappend b/multitech/recipes/udev/udev_165.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/udev/udev_165.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" diff --git a/multitech/recipes/usb-gadget-mode/usb-gadget-mode/corecdp/usb-gadget.conf b/multitech/recipes/usb-gadget-mode/usb-gadget-mode/corecdp/usb-gadget.conf new file mode 100644 index 0000000..ecf0844 --- /dev/null +++ b/multitech/recipes/usb-gadget-mode/usb-gadget-mode/corecdp/usb-gadget.conf @@ -0,0 +1,3 @@ +USB_MODE="serial" +MODULE_OPTIONS="" + diff --git a/multitech/recipes/usb-gadget-mode/usb-gadget-mode_0.0.2.bbappend b/multitech/recipes/usb-gadget-mode/usb-gadget-mode_0.0.2.bbappend new file mode 100644 index 0000000..70a2072 --- /dev/null +++ b/multitech/recipes/usb-gadget-mode/usb-gadget-mode_0.0.2.bbappend @@ -0,0 +1 @@ +FILESPATHBASE := "${FILESPATHBASE}:${FILE_DIRNAME}" |