linux-2.6.35: mtcdp: add spidev devices

2 files changed, 31 insertions, 16 deletions

diff --git a/multitech/recipes/linux/linux-2.6.35/mtcdp/defconfig b/multitech/recipes/linux/linux-2.6.35/mtcdp/defconfig
index 68eaf6d..1664307 100644
--- a/multitech/recipes/linux/linux-2.6.35/mtcdp/defconfig
+++ b/multitech/recipes/linux/linux-2.6.35/mtcdp/defconfig
@@ -1131,7 +1131,7 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPI_SPIDEV=m
 # CONFIG_SPI_TLE62X0 is not set
 
 #
diff --git a/multitech/recipes/linux/linux-2.6.35/mtcdp/linux-2.6.35.14-mach-at91.patch b/multitech/recipes/linux/linux-2.6.35/mtcdp/linux-2.6.35.14-mach-at91.patch
index 30b4712..696b04d 100644
--- a/multitech/recipes/linux/linux-2.6.35/mtcdp/linux-2.6.35.14-mach-at91.patch
+++ b/multitech/recipes/linux/linux-2.6.35/mtcdp/linux-2.6.35.14-mach-at91.patch
@@ -1,7 +1,7 @@
 Index: linux-2.6.35/arch/arm/mach-at91/at91sam9260_devices.c
 ===================================================================
---- linux-2.6.35.orig/arch/arm/mach-at91/at91sam9260_devices.c	2011-08-12 14:37:24.056904132 -0500
-+++ linux-2.6.35/arch/arm/mach-at91/at91sam9260_devices.c	2011-08-12 14:39:25.459149746 -0500
+--- linux-2.6.35.orig/arch/arm/mach-at91/at91sam9260_devices.c	2010-08-01 17:11:14.000000000 -0500
++++ linux-2.6.35/arch/arm/mach-at91/at91sam9260_devices.c	2013-11-12 13:28:25.629356536 -0600
 @@ -183,9 +183,9 @@
  		at91_set_B_periph(AT91_PIN_PA25, 0);	/* ERX2 */
  		at91_set_B_periph(AT91_PIN_PA26, 0);	/* ERX3 */
@@ -34,8 +34,8 @@ Index: linux-2.6.35/arch/arm/mach-at91/at91sam9260_devices.c
  {
 Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
 ===================================================================
---- linux-2.6.35.orig/arch/arm/mach-at91/board-sam9g20ek.c	2011-08-12 14:37:05.596941320 -0500
-+++ linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c	2011-08-12 14:48:20.617283739 -0500
+--- linux-2.6.35.orig/arch/arm/mach-at91/board-sam9g20ek.c	2010-08-01 17:11:14.000000000 -0500
++++ linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c	2013-12-17 15:05:27.464450574 -0600
 @@ -27,6 +27,11 @@
  #include <linux/gpio_keys.h>
  #include <linux/input.h>
@@ -135,9 +135,9 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
 +	.name		= "at25040b",
 +	.page_size	= 8,
 +	.flags		= EE_ADDR1,
-+};
+ };
 +#endif
-+
+ 
 +#define MTS_EXT_STT25_TEST		0
 +#if MTS_EXT_STT25_TEST
 +static struct mtd_partition m25_partitions[] = {
@@ -146,8 +146,8 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
 +		.offset	= 0x00000000,
 +		.size	= MTDPART_SIZ_FULL,
 +	},
- };
- 
++};
++
 +static struct flash_platform_data m25_spi_flash_data = {
 +	.type		= "sst25vf080b",
 +	.nr_parts	= ARRAY_SIZE(m25_partitions),
@@ -157,7 +157,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  
  /*
   * SPI devices.
-@@ -107,6 +185,54 @@
+@@ -107,6 +185,69 @@
  	},
  #endif
  #endif
@@ -181,6 +181,21 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
 +		.chip_select	= 4,
 +		.bus_num	= 1,
 +	},
++	/* max_speed_hz = 0 means as slow as possible
++	 * for OCG, this means approx 520kHz
++	 */
++	{ /* SPI1_NCS5 to external connector */
++		.modalias	= "spidev",
++		.chip_select	= 5,
++		.bus_num	= 1,
++		.max_speed_hz	= 0,
++	},
++	{ /* SPI1_NCS6 to external connector */
++		.modalias	= "spidev",
++		.chip_select	= 6,
++		.bus_num	= 1,
++		.max_speed_hz	= 0,
++	},
 +#if MTS_EXT_AT25_TEST
 +	{
 +		.modalias	= "at25",
@@ -212,7 +227,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  };
  
  
-@@ -115,7 +241,7 @@
+@@ -115,7 +256,7 @@
   */
  static struct at91_eth_data __initdata ek_macb_data = {
  	.phy_irq_pin	= AT91_PIN_PA7,
@@ -221,7 +236,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  };
  
  
-@@ -124,18 +250,48 @@
+@@ -124,18 +265,48 @@
   */
  static struct mtd_partition __initdata ek_nand_partition[] = {
  	{
@@ -278,7 +293,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  		.size	= MTDPART_SIZ_FULL,
  	},
  };
-@@ -195,11 +351,13 @@
+@@ -195,11 +366,13 @@
  
  /*
   * MCI (SD/MMC)
@@ -293,7 +308,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  };
  
  
-@@ -207,15 +365,10 @@
+@@ -207,15 +380,10 @@
   * LEDs
   */
  static struct gpio_led ek_leds[] = {
@@ -312,7 +327,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  		.default_trigger	= "heartbeat",
  	}
  };
-@@ -269,14 +422,36 @@
+@@ -269,14 +437,36 @@
  static void __init ek_add_device_buttons(void) {}
  #endif
  
@@ -355,7 +370,7 @@ Index: linux-2.6.35/arch/arm/mach-at91/board-sam9g20ek.c
  };
  
  
-@@ -305,7 +480,7 @@
+@@ -305,7 +495,7 @@
  	/* PCK0 provides MCLK to the WM8731 */
  	at91_set_B_periph(AT91_PIN_PC1, 0);
  	/* SSC (for WM8731) */