blob: 6d0e22fabfd146214a3214e177ca2b6af7a220ff (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
Configurable monitor program that uses softdog.
This program (softdog-mon) must be running all
the time once it is started, or the
system will reset itself without a shutdown.
The problems detected may prevent shutdown, so a
reset is safer.
The SHUTDOWNTIMEOUT value is the time to allow for
shutdown. Since firmware updates are done during
shutdown, this should be the worst case time for
shutdown.
Variables passed through the environment:
# Monitor program will have 1 second granularity. Fixed.
# All times are in seconds.
# Hardware watchdog is found first, which is watchdog0.
WATCHDOG = /dev/watchdog1
# Nice value -20, is highest priority for a user program, 19 is lowest.
NICE = -20
# Watchdog timeout in seconds
TIMEOUT = 60
# How often to feed in seconds
FEED = 10
# File is synchonously open/read/written/closed every 30 seconds
FILESAMPLERATE = 30
# File to be read/written
# If I/O hangs, the TIMEOUT value is the maximum seconds until we
# reset the device.
MONITORFILE = /media/card/.softdog_monitor
# Minimum available system memory in bytes
MINIMUM_AVAILABLE_MEM = 3000000
# Minimum free high memory
MINIMUM_FREEHIGH = 0
# Rate at which we sample available memory
MEMSAMPLERATE = 3
# last samples saved
MEMSAMPLES = 100
# maximum number of samples failed in last samples saved
MEMFAILEDSAMPLES = 20
# Allow time for flash upgrade during shutdown
# This happens when a SIGTERM signal is received.
# So shutdown has this many seconds to complete.
SHUTDOWNTIMEOUT=600
Their is an additional test program called
hog. This can be used to acquire memory and kernel
resources.
hog 4750000
This will start five processes with 4750000 bytes
of memory. The idea is to trigger the watchdog.
hog 4750000
Creates five processes with the amount of memory
specified.
In a typical test:
Log into the device several times with ssh, and do sudo -s
and acquire a root shell.
As root start the program hog, the amount of memory required
will depend on the size of the programs typically running.
Start top on the several screens logged in. Try to get the
available memory below 3MB. Once 20 samples have failed
the device will reboot.
|
