| Age | Commit message (Collapse) | Author | Files |
|---|
|
If you specify a local directory which happens to be a git repository
with an origin remote (and it is in fact remote), we can use that for
SRC_URI rather than leaving it blank in the recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
source
Sometimes you don't want to build an entire project, just a subdirectory
of it; add a --src-subdir option to make that easier. (We still look for
a single subdirectory in what gets unpacked, e.g. what you might find
within a tarball, so whatever you specify with this option is added onto
the end of that.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Quoting is optional in CMakeLists.txt and is occasionally used, so strip
out quotes if they are present.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add the ability to install additional pre-built items (from shared
state) into the extensible SDK. This can already be done implicitly by
adding something to DEPENDS within a recipe you're working on and then
running "devtool build", but it's useful to be able to explicitly
install things particularly if you're using the extensible SDK as a
traditional toolchain.
Note that for this command to be useful you need to have SSTATE_MIRRORS
set in your SDK configuration, and that mirror needs to be populated
with sstate artifacts for recipes you wish to be able to install.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make the following improvements to the SDK update process:
* Use a manifest file with sha256sums to track files other than sstate
and metadata that we need to update - e.g. conf files. This allows us
to handle where files such as auto.conf may or may not be present,
as well as the configuration changing without affecting task signatures
- we still want the config files copied in that case rather than it
saying nothing needs to be done.
* Write the SSTATE_MIRRORS_append to site.conf rather than local.conf
so that local.conf remains static (since we don't want to trigger an
update every time). Also, If there is an SSTATE_MIRRORS value already
set in the configuration we can skip this and assume it contains the
needed packages.
* Allow the update process to be run in any directory, don't assume
we're already at the base of the SDK
* Where practical, fetch remote files into a temporary location and
then move them to the desired location at the end, to avoid a
failed update leaving the SDK in a broken state.
* Update all installed do_populate_sysroot / do_packagedata tasks
instead of using the SDK targets. This ensures any item installed
through dependencies after installation (e.g. when running
"devtool build") won't go stale.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* Use tempfile.mkdtemp() instead of hardcoding temp dir
* Set a variable early for the temp locked sigs file and use that
everywhere
* Delete the temp dir at the end
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When you run devtool build, you need to have the pkgdata written out at
the end, so that if what you're adding is a library and the next thing
you add is something that depends on that library, the necessary
information to map the dependency back to the recipe is present. In
practical terms all this means is we need do_packagedata to run in
addition to do_populate_sysroot.
This does mean that do_package needs to run which wasn't running before,
and that means that the few package QA tests that run within do_package
such as installed-vs-shipped will now be run. This may be a bit
bothersome, and prompted a fix for one of our oe-selftest tests as a
result, but I don't see an easy way around it. Ultimately if you care
about using the recipe in an image you'll need to fix any such errors
anyway.
Fixes [YOCTO #8887].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a variable SDK_INCLUDE_PKGDATA which you can set to "1" to include
pkgdata for all recipes in the world target. There are a couple of uses
for this:
1) If you use "devtool add" to add a recipe that builds something which
depends on anything in world, the dependency can then be correctly
mapped to the recipe providing it and that recipe can be added to
DEPENDS, since we have the pkg-config and shared library dependency
data within pkgdata.
2) You'll be able to search for these recipes and any files they
package for the target with "devtool search" since that also uses
pkgdata
This of course assumes you've tailored world through EXCLUDE_FROM_WORLD
to only include recipes you'd want built in your distro, but I think
that's a reasonable assumption; failing that there is a
WORLD_PKGDATA_EXCLUDE variable that you can set to exclude any recipes
you don't want.
Note that this patch relies on functionality implemented in a recent
BitBake patch and will not work without it.
Implements [YOCTO #8600].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added missing docstrings, fixed wrong indentation and long lines.
Final pylint score is 9.89/10
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Added description of 'include' parser command to the
'wic help kickstart' output.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In order to give and example of 'include' feature of ks parser
and for testing purposes common parts of 3 canned wks files were
moved into common.wks.inc
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used custom argument type to implement search of include
.wks files in canned wks paths. Include files can be
specified either by full path or by name.
[YOCTO #8848]
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This function is going to be used by ks parser to find include .wks
files. get_boot_config name is a bit confusing as function is quite
generic. It looks if file is present in the canned wks directories.
Renamed get_boot_config -> get_canned.
Renamed parameter file_boot -> file_name.
Updated description.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Extended parser to support inclusion of .ks files:
recursively called self._parse to parse included .ks
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Interesting bug was found during implementation of 'include'
parser command.
Build directory was removed in do_configure_partition method of
bootimg- source plugins. This can cause removal of previously
prepared partition images if /boot partition is mentioned after
other partitions in .ks file.
Moved work directory removal to direct.py before processing
partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation for 'include' support.
Used unique counter instead of line number for partitions
in .ks file. Line numbers can be equal for different .ks files,
which can cause problems if one .ks file is included into
another.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This is a preparation for implementation of include statement.
Parser will be called recursively to parse included .wks files,
so it should be available as a method.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
I found these when I was looking at libftdi and they seem to be
generic enough to show up in at least a couple of other packages so I
figure I'll add them.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add support for extracting dependencies from CMakeLists.txt. There's
still a bunch of things missing that are outside the scope of OE-Core
and we still lack a proper extension mechanism, but this is a good
start.
This also adds an oe-selftest test to exercise the new code a bit.
Implements [YOCTO #7635].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We want to specify dependencies on virtual/* rather than whatever
library is selected in the current configuration.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Some refactoring to allow access to the library/header/pkg-config
mappings and the DEPENDS / unmapped dependency output code from other
classes than AutotoolsRecipeHandler.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The regex for detecting git URLs was unanchored, leading to it matching
where it shouldn't have. An example of where this went wrong was
http://taglib.github.io/releases/taglib-1.9.1.tar.gz.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Support a number of macros from autoconf-archive when reading
configure.ac to extract dependencies.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are a few different macros that can be used to pick up these
tools, add support for them all.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The presence of BOOST_REQUIRE or AX_BOOST.* indicates that boost is a
dependency.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
* The regexes for PKG_CHECK_MODULES / AC_CHECK_LIB were a bit too strict
and thus we were skipping some macros.
* Add support for PKG_CHECK_EXISTS
* Avoid duplicates in warning on missing pkg-config dependencies
* Ignore dependency on musl (since this may come up if it's the selected
C library)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
kickstarter.py was not the best name for this module as previously
there was a directory with the same name in scripts/lib/wic/.
All files were removed from it, but .pyc files could still stay there
causing imports from wic.kickstart to fail with
ImportError: cannot import name KickStart.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Overriden error method to throw exception instead of
printing usage error message. Exception is caught by
KickStart code to add .ks file name and line number.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed imports of wic.kickstart from plugins as they're
not used in the code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Caught argparse.ArgumentError
Included .ks file name and line number into the error messages.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Catch parsing errors and output them using msger.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This exception will be raised by kickstart parser
on parsing errors and processed in the code which
calls parser to produce meaningful error output.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Without one of the --ondrive, --ondisk or --use-uuid options for a
partition with a mountpoint specified the automatically generated
fstab entry will be invalid.
[YOCTO #8844]
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used partitions and configfile bootloader attributes instead of
using getters get_bootloader_file and get_partitions.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used size and source_file attributes instead of using
setters. It's more pythonic, clear an consistent.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Got rid of get_rootfs and set_rootfs java-like getter and
setter. Renamed rootfs to rootfs_dir to be consistent with
the name of kickstart parameter --rootfs-dir.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used bootloader.timeout instead of kickstart.get_timeout getter.
Accessing attributes instead of getting them with getters is
more pythonic, shorter and readable. It also more consistent as
most of partition and bootloader attributes are used this way.
This change also takes care of appendLine bootloader attribute:
it's renamed to bootloader.append attribute provided by new parser.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
New data structure is less nested than old one.
Adjusted bootloader and partitions fields:
self.ks.handler.bootloader -> self.ks.bootoader
self.ks.handler.partitions -> self.ks.partitions
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed pykickstart-related code as it's replaced by
new kickstart parser.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Used KickStart parser class instead of pykickstart API.
This commit breaks wic as data structures and field names
provided by new API are a bit different from old ones.
This issue will be addressed in the following commits.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This module will replace existing pykickstart machinery
it contains only option used by wic, it's simple and
clear. And It will allow to remove a lot of old complex
code from 3rdparty/pykickstart/ and kickstart/custom_commands.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Copied partition-related API from kickstart/custom_commands/partition.py
to separate module in preparation for removal of all
pykickstart related code.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
workarounds
Rather than horrible workarounds, use the new --setscene-only option
of bitbake to pre-populate the SDK structures.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It's logical that you would want to build BBCLASSEXTENDed items
separately through devtool build, so simply allow that - we're just
passing the name verbatim to bitbake, so all it means is adjusting the
validation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe file itself was created in the workspace, and it uses
BBCLASSEXTEND (e.g. through devtool add --also-native), then we need to
clean the other variants as well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We're doing this in a couple of places, let's just find the recipe file
if it exists within the workspace (which it will if it's been added
through "devtool add") when we read in the workspace.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sometimes you need to build a variant of a recipe for the build
host as well as for the target (i.e. BBCLASSEXTEND = "native"); add a
--also-native command line option to "recipetool create" that enables
this and plumb it through from an identical option for "devtool add".
(We could conceivably do the same for nativesdk, but I felt it might be
confusing within the context of the extensible SDK, where nativesdk
isn't really relevant to the user.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We need to run the clean for all recipes that are being reset before we
start deleting things from the workspace; if we don't, recipes providing
dependencies may be missing when we come to clean a recipe later (since
we don't and couldn't practically reset them in dependency order). This
also improves performance since we have the startup startup time for the
clean just once rather than for every recipe.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If the recipe name ends with -native then we should inherit native;
likewise if it starts with nativesdk- then inherit nativesdk.
(Note that the recipe name must actually be specified by the user in
order to trigger this - we won't do it based on any name auto-detected
from e.g. the tarball name.)
Since we're doing this based on the name, "devtool add" will also gain
this functionality automatically.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
As a matter of general convention we expect recipe names to be lower
case; in fact some of the packaging backends insist upon it. Since in
this part of the code we're auto-determining the name, we should convert
the name to lowercase if it's not already so that we're following
convention and avoiding any validation issues later on.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
