summaryrefslogtreecommitdiff
path: root/meta/site
AgeCommit message (Collapse)AuthorFiles
2016-10-07siteinfo.bbclass: Add mipsisa{32, 64}r6{el, } supportZubair Lutfullah Kakakhel4
Add support for MIPS Release 6 ISA Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-30mips64-linux: set ac_cv_sizeof_ssize_t for mips64elZubair Lutfullah Kakakhel1
The fix for [YOCTO #5935] was applied for mips64 but not for mips64el Patch it for mips64el For description of issue, check OE-Core 7a5b6b96 Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-20site: Move rsync_cv_HAVE_C99_VSNPRINTF to common-linuxKhem Raj5
If we do not cache is then configure in distcc will try to compute it using AC_TRY_RUN which will give some result on x86-64 host when target is x86-64 but it generally is wrong for cross compilation. We therefore cache it for all linux targets. This issue is highlighted by clang when compiling distcc where it figures that its cross compiling and therefore triggers it to include its own implementation of snprintf() which does not go well with clang, gcc compiles it fine thats why we never saw the problem thus far. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-04-11meta/site: remove sizeof_off_tRoss Burton6
The size of off_t depends on whether large file support is enabled through preprocessor flags, so we can't cache this. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-26site: Cache config vars for ccacheKhem Raj1
ccache's configure tries to do a runtime test to determine hw_cv_func_snprintf_c99 and hw_cv_func_vsnprintf_c99 which wont work in OE. c99 versions of these functions are provided on all supported libc implementations in OE-Core Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-03-20siteinfo: Move apr configure cache to common-linuxKhem Raj7
There are variables which are used in all target specific sitefiles. Move it to common-linux, so it can be effective for all targets. Usually they will vary based upon libc e.g. musl does not have process shared mutexes so apr_cv_process_shared_works should be no for it. For glibc though it should be yes but existing behaviour is to use 'no' so its left as it is. Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-12-12site/common-linux: Add some macros to avoid sleeps during configureRichard Purdie1
If you profile gettext do_configure you notice it has some "sleep 1" type events occurring. This patch ensures we cache the right values to avoid those pointless delays there and in any other configure scripts using the same macros. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-09-21siteinfo: Add nios2-linuxMarek Vasut1
Add nios2-linux info, pulled from OE-Classic [1] as of commit fabd8e6d07d3cd0cc93c2a0fc804f8c8f316c649 . [1] https://github.com/openembedded/openembedded.git Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-07-22common-glibc: define bash_cv_getcwd_mallocJoe Slater1
We do not want bash to use internal code for getcwd() because it can fail in certain filesystem types. Trust that the function in glibc is not "broken". Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-12-21siteinfo: account for 32 and 64 bit armJoe Slater3
Pull wordsize related items from arm-common and put in arm-32. Leave them as they were. Copy arm-32 to arm-64 and comment out all variables. Re-define to correct values leaving items which do not appear to be used undefined. Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-18site/common-darwin: Really fix common-darwin typoRichard Purdie1
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-15site: Add common-darwinRichard Purdie1
We need this to ensure there are some correct values when building with meta-darwin. This matches the addition of a common-mingw site file in the core. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-07-19common-mingw: force ac_cv_func_mmap_fixed_mapped=noRichard Tollerton1
The expat mingw build breaks because ix86-common defines ac_cv_func_mmap_fixed_mapped=yes, causing the build to think that mmap(), mman.h actually exist. Fix this by always forcing the variable to "no", which configure would have concluded without such interference. Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-05-30siteinfo, insane: Recognize musl specific tripletsKhem Raj1
We will use '-musl' to identify musl based systems this patch lays the foundation for recognising those and map them to internal variable representations Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-03-17mips64-linux: set ac_cv_sizeof_ssize_tValentin Popa1
Set ac_cv_sizeof_ssize_t for mips64; mips-common will not overwrite it. "ssize_t is a posix define which is architecture specific whose value is signed size_t, glibc/uclibc for mips64/n64 linux platform defines it to be equivalent of 'long' and long here is 8bytes because mips64/n64 follows LP64 model. In OpenEmbedded our default ABI for mips64 platforms is N64, having said that autoconf decides to poke at the platform for finding these kind of sizes which fails when you are doing cross compiling hence we have to cache it." - Khem Raj [YOCTO #5935] Signed-off-by: Valentin Popa <valentin.popa@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-01-28unfs3, unfs-server: Replace all instances of unfs-server with unfs3Jason Wessel2
Other recipes dependencies and even some comments need to be updated for the removal of unfs-server and the replacement with unfs3. The unfs3 is a complete drop in replacement providing all the prior functionality of NFSv2 but also adding NFSv3. [YOCTO #5639] Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-12-14site: add xorg_cv_malloc0_returns_nullRoss Burton2
util-macros 1.18 will look in the autoconf cache for this value so instead of using overrides in xorg-lib-common, use the per-libc site cache. Alert readers may notice that the site file claims that glibc returns NULL from malloc(), when the previous change (e628c8aba0189de30de2833882b9999ff3b6547a) claimed that it didn't. The previous change was incorrect, whilst malloc(0) returns a valid pointer, realloc(p,0) does in fact return NULL, so the Xlib wrapper functions are needed. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-09-30native: Use a native site file and ensure the correct sed is usedRichard Purdie1
native recipes were not using the site files. There are some things we need to correct such as not using the path to sed-native. This allows us to deploy settings globally for all recipes rather than hacking around then in individual recipes as libtool-native used to for sed. This fixes a regression introduced by http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=32edeb391f2107bb66b361cdcd4b8d4447731c33 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-09-26gcc/libtool/perl: Fix various path to sed-native problemsRichard Purdie1
If sed-native is built before these programs, hardcoded paths to sed-native can end up in scripts and other parts of the system which may cause issues if they are later used from sstate and sed-native is not installed. To avoid this, this patch changes the global site configuration to specify that plain "sed" is fine to be used. We need to spell this out for gcc since it doesn't see the site files since we don't autoreconf it. We can remove the values from libtool. We tell perl to use "/bin/sed" since it requires a path and the system sed should be just fine for it. [YOCTO #4971] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-07-05apr_cv_mutex_recursive=yes added to apr_1.4.6.bb to make rosnodes workvictor1
Working with the meta-ros project we detected that the ROS nodes didn't launch properly the reason was that by default apr_cv_mutex_recursive in apr is set to no and this leads to the APRENOTIMPL return value of apr_thread_mutex_create in thread_mutex.c when APR_THREAD_MUTEX_NESTED is requested via flags. Added CACHED_CONFIGUREVARS += "apr_cv_mutex_recursive=yes" to sources/openembedded-core/meta/recipes-support/apr/apr_1.4.6.bb to fix this issue. It has also been removed the mention of this variable in meta/site/powerpc32-linux. Signed-off-by: Víctor Mayoral Vilches <v.mayoralv@gmail.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-06-13site: add more alignment values for at-spi2-coreRoss Burton5
x86 and x86_64 values were added in 8c46ec. The x86-64 values were missing an entry, add MIPS and PowerPC values from myself in qemu, and ARM values from Martin Jansa. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Saul Wold <sgw@linux.intel.com>
2013-05-30powerpc64-linux: Update cached autoconf value for apr on powerpc64Zhenhua Luo1
Fix below apr configure issue of powerpc64 targets. | configure:27173: checking whether TCP_NODELAY and TCP_CORK can both be | enabled | configure:27179: error: in `/home/yocto/workspace/sdk-devel/build_p5020ds-64b_release/tmp/work/ppc64e5500-fsl-linux/apr/1.4.6-r2/apr-1.4.6': | configure:27181: error: cannot run test program while cross compiling Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-05site/common-uclibc: add predefined configure vars for coreutilsHenning Heinold1
* this sets some configure vars which will be guessed false in cross-compile case for uclibc Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-04-04site: add endianness information for libmemcachedMarcin Juszkiewicz2
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-02-13site/x32-linux: Specify double alignmentRichard Purdie1
Double alignment is 8 bytes on x32 but it is defaulting to 4 currently. This leads to various issues and fontconfig fails to build due to the mismatch triggering assert failures. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-21site: add x86-32/64 alignment values for at-spi2-coreRoss Burton2
This package isn't yet in oe-core, but GTK+ 3.6 depends on it so will be here at some point. Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2013-01-09site/common: deactivate a runtime check for ipv6-support in python >=2.7.1 ↵Lukas Bulwahn1
that fails when cross-compiling In configure there is a runtime check to determine buggy getaddrinfo and as we are cross-compiling this check goes wrong. If ipv6 is enabled in python, the failed test is reported as fatal error with the message Fatal: You must get working getaddrinfo() function. Setting ac_cv_buggy_getaddrinfo=no deactivates the runtime check and allows to compile python with ipv6 enabled. This commit was derived from the commit 700b75e7661062aa93cf81205b78c8bf7609922d in the Classic OpenEmbedded Development Tree. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-12-03site/common-linux: move ac_cv_o_nonblock_inherited to site/common-linuxRoy.Li2
When compiling apr for no-powerpc arch, the flag ac_cv_o_nonblock_inherited is always set to yes in cross compiling environment. This flag is intended to think the socket, returned from accept(), inherit file status flags such as O_NONBLOCK from the listening socket, but socket never inherits file status from the listening socket on Linux (more information to man accept). This is Linux-wide behaviour, so move it from meta/site/powerpc32-linux to site/common-linux. If ac_cv_o_nonblock_inherited is set to yes on Linux, clients can not access the same ip address(URL) with Apache web server via http(port 80) and https(port443) without redirection Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-07-02site/common-linux: fix incorrect size of pid_t for aprPaul Eggleton1
If cross-compiling, apr's configure script assumes that pid_t is 64-bit which is wrong - it appears that 32-bit is a safe assumption for Linux no matter what the architecture, so use that instead by default. This fixes Apache writing garbage to its pid file when built using apr produced from this recipe. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-06-15site/x86_64-linux-uclibc: Cache definitions of guint32/guint64Khem Raj1
Without this glib 2.32.x wont build. Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-20site/sh-common: Add missing caches variables to build glib-2.32Khem Raj1
This is on the same tone as done for other architectures Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-20site: Add mips64 eglibc and uclibc site filesKhem Raj4
Signed-off-by: Khem Raj <raj.khem@gmail.com>
2012-05-06site/arm-common: alignment values for guin32, guin64 and unsigned longTomas Frydrych1
These are required to build recent versions of glib-2.0
2012-05-06site/powerpc-common: alignment values for guin32, guin64 and unsigned longSaul Wold1
These are required to build recent versions of glib-2.0 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-05-06site/mips-common: alignment values for guin32, guin64 and unsigned longSaul Wold1
These are required to build recent versions of glib-2.0 Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-05-03site/ix86-common, site/x86_64-linux: alignment values for guin32, guin64 and ↵Martin Jansa2
unsigned long These are required to build recent versions of glib-2.0 Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2012-04-26evolation-data-server: Rename from eds-dbusSaul Wold5
[YOCTO #2316] Signed-off-by: Saul Wold <sgw@linux.intel.com>
2012-02-10powerpc64-linux: Update cached autoconf values for libpcap on powerpc64Matthew McClintock1
Without this fix, libpcap will fail to build on powerpc64 Signed-off-by: Matthew McClintock <msm@freescale.com>
2012-01-19site/ix86-common: fix an errorNitin A Kamble1
Fixed this line ac_cv_sizeof_unsigned_char=${ac_cv_sizeof_unsigned_int=1} as this line ac_cv_sizeof_unsigned_char=${ac_cv_sizeof_unsigned_char=1} This issue was causing guile recipe to compile-fail for x86 target. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
2012-01-10Revert "site/common-uclibc: Cache gl_cv_func_wcwidth_works"Richard Purdie1
This reverts commit a471d342424502de48f28c4f8297d490f2cd1443.
2012-01-09site/common-uclibc: Cache gl_cv_func_wcwidth_worksKhem Raj1
Its not computed properly during configure and we configure uclibc with widechar support anyway so its fine to cache it. It fixes the errors like | In file included from ./stdio.h:31:0, | from fpurge.h:20, | from fpurge.c:20: | /home/kraj/work/angstrom/sources/openembedded-core/build/tmp-uclibc/sysroots/qemux86/usr/include/stdio.h:662:40: error: expected declaration specifiers or '...' before '(' token | make[4]: *** [fpurge.o] Error 1 Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-12-12siteinfo: create a new siteinfo for x32-linuxH.J. Lu1
X32 has different sizes for many types: 1. off_t and ino_t are 8 byte, instead of 4 byte. 2. pthread_mutex_t is 32byte, instead of 24 byte. Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
2011-11-24site/x86_64-linux: add cvs config variablesNitin A Kamble1
configure of cvs packages was failing on the meta-toolchain for a x86_64 target. Configure error reported: checking whether printf supports %p... configure: error: cannot run test program while cross compiling This fixes [YOCTO #1781] Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-11-18glib-2.0: fix qsort_t testing for uclibcHenning Heinold2
* instead of disabling the configure test and set it always true use the site files to set it true for glibc/eglibc and false for uclibc * remove the patch ' tested only for uclibc * bump PR Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-10-31python, python-native: upgrade from 2.6.6 to 2.7.2Nitin A Kamble1
Rebased these patches to the newer code modified: python-native/nohostlibs.patch modified: python/01-use-proper-tools-for-cross-build.patch modified: python/06-avoid_usr_lib_termcap_path_in_linking.patch modified: python/06-ctypes-libffi-fix-configure.patch modified: python/multilib.patch Deleted these patches are the are now upstream deleted: python/02-remove-test-for-cross.patch deleted: python/security_issue_2254_fix.patch Added this patch to python-native new file: python-native/multilib.patch Updated site config file for python modified: ../../site/common-linux : add ac_cv_have_long_long_format for python avoid this error in python: Include/pyport.h:243:13: error: #error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG" Updated default python version modified: ../../conf/distro/include/default-versions.inc Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
2011-10-27Give coreutils a chance to build the df utilityJulian Pidancet2
The coreutils configure script is unable determine how to get free space from the Operating System when cross-compiling. This changes caches the result of the "statfs2_bsize" test for the coreutils configure script. Both glibc and uclibc defines statfs as a two-argument function and uses a struct statfs containing a f_bsize field. That's why the fu_cv_sys_stat_statfs2_bsize variable has to be defined for both libcs. Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-10-24coreutils: Upgrade recipe 8.12 -> 8.14Khem Raj1
Change in site files is needed since in cross build envrionment the test to check for gl_cv_func_fstatat_zero_flag is a runtime test Signed-off-by: Khem Raj <raj.khem@gmail.com>
2011-09-29Add autoconf cache for screen on powerpc64Matthew McClintock1
Screen can not run tests for the target and depends on the aotuconf cache for information about the target system Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2011-09-07site/x86_64: Add entries to fix conf error on x86_64Zhai Edwin1
Add entries for ashldi3, bswapsi2... to fix autoconf error of grub on x86_64 [YOCTO #1434] got fixed. Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
2011-08-04Various siteinfo: Drop rp-pppoe variablesTom Rini7
These variables were wrong on big-endian machines and this recipe is now handled in meta-oe (along with the siteinfo files). Signed-off-by: Tom Rini <tom_rini@mentor.com>