| Age | Commit message (Collapse) | Author | Files |
|---|
|
eMMC devices may report block devices like "mmcblk0rpmb" and
"mmcblk0boot0". These are not actually block devices and any
read/write operation on them will fail. To prevent spamming error
messages attempting to mount them, just ignore these devices.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
The kernel does not automatically mount devtmpfs when using initramfs
based booting (even when using CONFIG_DEVTMPFS_MOUNT). If the rootfs
is built with USE_DEVFS=1 (which is the default), the system ends up
with a completely empty /dev to begin with.
Busybox uses the first entry in inittab slightly different than
other init systems:
<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is.
Since /dev/null is not there yet, Busybox throws errors instead of
executing the commands, and hence never mounts devtmpfs:
init started: BusyBox v1.24.1 (2016-09-04 11:53:14 PDT)
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
can't open /dev/null: No such file or directory
Avoid this circular dependency by not specifing <id>. With that
Busybox ends up using the stdio of the init process and executes
the inittab just fine.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Busybox syslog uses a shmmem circular buffer [1][2] when launch with -C option
when systemd (is enabled) takes the control of syslog messages and then forward
the messages to busybox syslog daemon, systemd journald don't usage of shmmem
circular buffer.
If -C is specified busybox-syslog never be able to read the forwarded
messages from systemd journald and don't wrote it to /var/log/messages.
This file is only installed when systemd is enabled [3].
[1] https://git.busybox.net/busybox/tree/sysklogd/syslogd.c?h=1_24_stable#n464
[2] https://git.busybox.net/busybox/tree/sysklogd/logread.c?h=1_24_stable#n82
[3] http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-core/busybox/busybox.inc#n295
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
echo would fail if /sys is not mounted and boot would abort
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Mark O'Donovan <modonovan@biotector.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Also make the rcS and rcK comments match the code.
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
in config metadata we can configure busybox based init and device
initializer ( mdev ) using e.g.
VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
VIRTUAL-RUNTIME_login_manager = "busybox"
VIRTUAL-RUNTIME_init_manager = "busybox"
VIRTUAL-RUNTIME_initscripts = "initscripts"
VIRTUAL-RUNTIME_keymaps = "keymaps"
DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
busybox can be used to provide init system
combined with mdev it makes it a complete init
system for really tiny systems.
This patch uses above defines to configure features in busybox to enable
the init system and mdev in a configurable manner
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The directory ${MDEV_AUTOMOUNT_ROOT}/ which is '/run/media' may not
exist yet when the device is found, so lets use -p switch to mkdir cmd
so it create preceding parent dirs if needed.
Remove some bash specific constructs
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using iproute2 to remove the route all default rules
will be removed. Scope the removal by interface like it is
done with ifconfig.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Linux allows to install multiple default routes with
different metrics. Start with a metric above 0 to
allow other parts of the system to install routes
with a lower metric.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Upon inserting a USB stick or similar device, mdev will run
an automounter script that mounts valid partitions on
/media/<device>. The script first checks /etc/fstab entries
so that mounting on UUID or LABEL or using custom mount options
is still possible. If /etc/fstab does not contain particular
mount options, the script will create (and remove) the mountpoint
automatically.
The script also supports full disk partitions (devices without
partition table).
The following environments can be set in /etc/default/mdev:
MDEV_AUTOMOUNT=n (Disables automounting completely)
MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location)
Automatic mounting for a particular device can be disabled by
creating a file "/dev/<device>.nomount". This is helpful in
scripts that create partitions for example, and want to perform
specific actions which require the device to remain unmounted.
A more complex variation (using LABEL based mounts) on this script
has been in use in OpenPLi for many years now, and I've used this
one on many projects already, so it's about time to push this to
mainline.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Add a line to mdev.conf that tells mdev to load kernel modules when
required.
For example, if you built wifi support as an external module, inserting
a wifi stick into a USB port will now automatically load that module
into the kernel and the wlan device will be ready for configuration.
Without this patch, you have to load required modules manually or force
them to load at system startup.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
Simplify the grep expression, use the more common "grep" command instead
of "egrep", avoid forking extra processes, join multiple invokations into
a single combined expression.
Change the touchscreen regex so that it also recognizes various USB
touchscreen controllers and the ad7879 i2c device.
Based on code used in OpenPLi and meta-topic.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
When using udhcpc along with ip command(/sbin/ip), broadcast address is not
assigned. Broadcast address is successfully assigned when using udhcpc without
ip command existence.
with ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:0.0.0.0 Mask:255.255.254.0
$
without ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:128.224.163.255 Mask:255.255.254.0
$
/etc/udhcp.d/50default[simple.script] is called to set ip address by dhcp
client, In case of ifconfig, it doesn't care of it's existence because it
will automatically calculate broadcast address then assign it if there is
no broadcast option. However in case of ip command, it requires broadcast
address statically.
Signed-off-by: Hu <yadi.hu@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
|
|
This fix allows the correct appending of -L to syslogd arguments when both file and remote logging are selected.
Signed-off-by: Michael Gloff <mgloff@emacinc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
During boot, there is a brief window during which /dev/initctl is
missing, which breaks initscripts that would need to access it. This
occurs because /etc/init.d/mountall.sh (rcS.d/S02...) attempts to ensure
/dev/initctl is present, but /etc/init.d/mdev (rcS.d/S06...) mounts over
/dev and clobbers the work done by mountall, and then does not wait
synchronously until initctl is ready before continuing.
To close this window, in /etc/init.d/mdev, we check whether /dev/initctl
is present, and if not, we remove it and recreate it. This is the same
thing that is done by /etc/init.d/mountall.sh, and we have verified that
any writers of /dev/initctl will wait synchronously until sysvinit
notices the change in fd and does the read, so no race exists.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
/dev/mdev.seq exists to synchronize concurrently running instances of
mdev and to ensure that they execute in the proper order. Without this
synchronization, it is possible to have inconsistent mount points, to
leak device nodes, or to have a node erroneously removed in rapid
hotplug scenarios.
Enable the use of mdev.seq by creating an empty /dev/mdev.seq at boot.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Otherwise, users cannot use named semaphores or shared memory.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add more comments to the systemd configuration file for busybox's
syslogd utility. The purpose is to easy the life of system administrators.
These comments are mostly derived from the comments in syslogd.c in
busybox.
[YOCTO #5722]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The default command-line options for launching busybox's syslogd are
"-C" if using sysvinit; but because we use /etc/default/busybox-syslog
when using systemd which the sysvinit initscript doesn't use, and no
/etc/default/busybox-syslog is installed by default in OE-Core, the
default arguments with systemd were no arguments at all with OE-Core
alone. Effectively merge in the bbappend from meta-oe that adds a
default file in order to set the default options to "-C" for systemd as
well.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
The ip is being installed into /sbin as of the latest busybox.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Install busybox test suite and run it as ptest.
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Add back inetd and inetd.conf files which are needed if
CONFIG_INETD is enabled in the defconfig. Grabbed these
files from oe-classic
This patch is based on the previous patch for denzil:
http://patches.openembedded.org/patch/33235/
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
|
|
/etc/default/rcS might be missing if the init manager is not sysvinit.
So we have to check for the existence of this file before sourcing it.
[YOCTO #3697]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
Make UTC variable in /etc/default/rcS has effect on hwclock.sh.
This variable declares whether the Hardware Clock is kept in UTC
or local time. Default its value to "yes" and change the comment.
[YOCTO #3341]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
udhcpc is invoked from the networking service, so it shouldn't exist
standalone. If /etc/init.d/busybox-udhcpc is present, it will cause
udhcpc to be started two times.
And since the script doesn't support the stop action, it will cause
udhcpc to be started even when system is being shutdown.
Remove /etc/init.d/busybox-udhcpc to resolve the issues.
[YOCTO #2840]
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
[YOCTO #2788]
The system will be hung when udhcpc starts, if nfs is mounted
at "/" directory and default route is different after starting
udhcpc.
The cause is that root_is_nfs() does not work after kernel-2.6.37,
since the device name has been changed from /dev/root to
${IPADDR}:${NFSDIR} on /proc/mounts. which leads to remove
the default routes to nfs server,
Now we use a loose match to check if rootfs is nfs.
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
|
|
* Support resolvconf
* Avoid bashism $((metric++))
* Use 'domain' instead of 'search' for domain parameter
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Busybox syslog includes functionality to drop duplicated syslog entries,
enable this feature in the defconfig yet disable it by default.
Expose configuration of the feature through the syslog-startup.conf file
and the syslog init script.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
This changes the default in syslog-startup.conf to log messages
to a file (/var/log/messages) because:
a) we already mount /var/log as a volatile mount by default
b) users are accustomed to looking at /var/log/messages as
most distributions don't ship with logread
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
It's possible to configure busybox syslog to only log messages above a
certain level, expose this functionality through the syslog-startup.conf
and syslog init script.
Valid values are 1-8 inclusive.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Setting rotation size and generations is supported with busybox syslogd
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
This option has been disabled in busybox since 2007 as it was deemed too
buggy. See:
http://git.busybox.net/busybox/commit/?id=4998c818919477d90674a3f220e7407c26da17f9
Signed-off-by: Joshua Lock <josh@linux.intel.com>
|
|
Busybox 1.19 introduced basic support for an rsyslog inspired syslog.conf
whereas we've been shipping syslog.conf as a file to be sourced by the
syslog init script in order to configure which options busybox's syslog is
started with.
Busybox 1.19 in syslog mode chokes on our syslog.conf and doesn't start.
This patch renames the syslog.conf we ship to syslog-startup.conf in order
to prevent busybox trying to parse the file as an rsyslog style syslog.conf
Fixes [YOCTO #1848]
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This changes the packaging only if the configuration used has mdev
support enabled.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
When the kernel is started using ip=dhcp, we want a way to be able to run
the udhcp client within busybox and not reset the interface.
When using the '-D' option to udhcpc, the defconfig script will be skipped
allowing the refresh without changing the network settings.
Also provide an initscript that can be used to detect ip=dhcp on the
kernel command line, if detected it will refresh the lease and set the
proper resolve.conf and related files, but not reset the interface.
Original code in Wind River Linux by Greg Moffatt <greg.moffat@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
