summaryrefslogtreecommitdiff
path: root/meta/lib/oeqa/sdk
AgeCommit message (Collapse)AuthorFiles
2017-04-11oeqa/sdk/cases/buildcpio: enable use of cached cpio from DL_DIRJoshua Lock1
All build project test cases will try to copy the requested source artefacts from DL_DIR before fetching. This testcase is referencing bzipped tarball whereas the recipe fetches a gzipped tarball. Switch to fetching the gzipped tarball in the test case so that we're able to use a cached tarball from DL_DIR Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-03-21meta/lib/oeqa: change sdk test from cvs to cpiobrian avery1
We currently fetch,configure,build, and install cvs as our test for the sdk. cvs unfortunately, requires a default editor in order to run. The change in 94790a8254d6 that checks to see if you have something like vi installed is fragile since you may have a different default editor. This patch switches from using cvs as a test to using cpio. cpio also uses autotools so the functionality tested is equivalent. Signed-off-by: brian avery <brian.avery@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-03-01oeqs/sdk*/case: Use universal_newlines for subprocess callsRichard Purdie1
This removes the need for some of the ugly decode calls with hardcoded locales. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-02-05oeqa/buildproject: Run gnu-configize by defaultRichard Purdie1
The runtime oeqa tests were failing in the on-target case, only for aarch64. This was because an old config.sub was being used. Similar to the SDK testing, call gnu-configize in the on-target case too to resolve the failing tests. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-31oeqa/sdk: Updates sanity tests for minimal eSDKFrancisco Pedraza2
Updates sanity tests to cope with minimal eSDK installer 1. Skips the validation of sanity if packagegroup-cross-canadian is in host package. 2. Skips if SDK does not include toolchain at cases/devtool.py This should fix [YOCTO #10794] Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2017-01-23classes/oeqa: Replace subprocess.check_call() with check_output()Richard Purdie1
If you use subprocess.check_output() the traceback will contain the output when the command fails which is very useful for debugging. There is no good reason not to use this everywhere. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2017-01-23oeqa/sdkext/cases: Migrate test case to new OEQA frameworkAníbal Limón2
Summary, - Changes base case class to OESDKExtTest. - Changes decorator classes to new ones. - Chnages variable names sdktestdir -> sdk_dir. - Added missing license to MIT. Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23classes/testsdk: Remove the need of TEST_LOG_DIR variableAníbal Limón3
The TEST_LOG_DIR was used for store sdk_target_log this log contains the output of the run of build commands now that information could be found also on log.do_testsdk under WORKDIR. The log will continue to store into SDK_DIR instead of TEST_LOG_DIR. Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/sdk/cases: Migrate tests to the new OEQA frameworkAníbal Limón7
Summary of the changes: - Remove auto extend_path using pkgutil at __init__, is not needed. - Change base class to OESDKTestCase. - Add td_vars attr to set dependencies of certain variables in test data. - Change skips from module level to class level because Test context (tc) now isn't at module level. - Variable names changes to be consistent (i.e. sdktestdir -> sdk_dir). [YOCTO #10599] - Don't use bb.utils functions use instead remove_safe and shutil for copy files. - SDKBuildProject pass test data variables instead of call getVar inside. [YOCTO #10231] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/utils: {Target,SDK,}BuildProject remove dependency of bbAníbal Limón1
Don't use bitbake references inside utils modules, in order todo that changes getVar calls for arguments in the __init__ method like dl_dir for all the classes and testlogdir, builddatetime in SDKBUildProject. Also don't export proxies inside _download_archive method, a good practice is to setup the proxies at init of the process instead of do it in this helper module. [YOCTO #10231] [YOCTO #10599] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
2017-01-23oeqa/utils: Move targetbuild to buildproject moduleAníbal Limón2
The new buildproject module will contain only BuildProject class a helper class for build source code. The remaining classes TargetBuildProject and SDKBuildProject was move to runtime and sdk respectively. [YOCTO #10599] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/sdk: Add case and context modules for the SDK componentAníbal Limón3
Adds case and context modules for SDK based on oetest.py old code. Enables SDK Test component usage with oe-test, the SDK Test component adds command line options for specify sdk installed dir, sdk environment and target/hosts maniftest. [YOCTO #10599] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/{runtime,sdk}/files: Move testsdkmakefile from runtime to sdk moduleAníbal Limón1
It doesn't make sense to have files related to sdk module into runtime module. [YOCTO #10599] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2017-01-23oeqa/sdk: Move test cases inside cases directoryAníbal Limón7
For match with the new structure of the OEQA framework. In the new framework Test component base directory in this case sdk module will contain case and context implementations. [YOCTO #10599] Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com> Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
2016-12-16meta: remove True option to getVar callsJoshua Lock1
getVar() now defaults to expanding by default, thus remove the True option from getVar() calls with a regex search and replace. Search made with the following regex: getVar ?\(( ?[^,()]*), True\) Signed-off-by: Joshua Lock <joshua.g.lock@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-09-28lib/oeqa: Regenerate galculator configureJussi Kukkonen1
galculator configure seems to be so old it does not recognise --with-libtool-sysroot: regenerate configure. Fixes [YOCTO #10191]. Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-08-23oeqa/buildiptables: Switch from netfilter.org to yoctoproject.org mirrorRichard Purdie1
We've had some upstream mirror instability so use our own mirror for the iptables sources to ensure this doesn't affect the test results. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-07-20oeqa/sdk: remove buildsudoku testRoss Burton1
This application needs GTK+ 2 which we're trying to move away from for Sato images. Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-07-01lib/oeqa: add Galculator to SDK and runtime testsRoss Burton1
This is a GTK+3 application, so we don't need to ship GTK+ 2 in Sato just for the SDK test suite. [ YOCTO #9780 ] Signed-off-by: Ross Burton <ross.burton@intel.com>
2016-06-23oeqa: fix hasPackage, add hasPackageMatchRoss Burton1
hasPackage() was looking for the string provided as an RE substring in the manifest, which resulted in a large number of false positives (i.e. libgtkfoo would match "gtk+"). Rewrite the manifest loader to parse the files into a proper data structure, change hasPackage to do full string matches, and add hasPackageMatch which does RE substring matches. Signed-off-by: Ross Burton <ross.burton@intel.com>
2015-09-28oeqa/sdk/gcc: Fix makefile testRichard Purdie1
The makefile test was hardcoding a test for gcc. In the SDK context, we need to use $(CC) to use the cross compiler. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2015-04-29lib/oeqa: Add sdk tests for gcc/perl/pythonRichard Purdie3
Enhance testing of the generated SDK tarballs by adding tests for gcc/perl/python based on the existing runtime tests. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-27oeqa/sdk/buildsudoku.py: add setUpModule method to run only when gtk+ in ↵Corneliu Stoicescu1
installed. Adding setUpModule in order to skip the module when gtk+ is not installed in the toolchain. Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2014-08-18oeqa/sdk/: add sdk tests for sudoku, iptables and cvsCorneliu Stoicescu4
Add test modules for sdk tests. NOTE: Original patch made by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-19 23:48:18 +0000