diff options
Diffstat (limited to 'meta/packages/linux/linux-omap2-git/beagleboard/TWL4030-08.patch')
| -rw-r--r-- | meta/packages/linux/linux-omap2-git/beagleboard/TWL4030-08.patch | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/meta/packages/linux/linux-omap2-git/beagleboard/TWL4030-08.patch b/meta/packages/linux/linux-omap2-git/beagleboard/TWL4030-08.patch deleted file mode 100644 index 9af25a762d..0000000000 --- a/meta/packages/linux/linux-omap2-git/beagleboard/TWL4030-08.patch +++ /dev/null @@ -1,278 +0,0 @@ -TWL4030: use symbolic ISR/IMR register names during twl_init_irq() - -From: Paul Walmsley <paul@pwsan.com> - -twl_init_irq() uses a bunch of magic numbers as register indices; this -has already led to several errors, fixed earlier in this patch series. -Now use descriptive macros instead of magic numbers. This patch should -not change kernel behavior. - -Signed-off-by: Paul Walmsley <paul@pwsan.com> ---- - - drivers/i2c/chips/twl4030-core.c | 188 +++++++++++++++++++------------------- - 1 files changed, 96 insertions(+), 92 deletions(-) - -diff --git a/drivers/i2c/chips/twl4030-core.c b/drivers/i2c/chips/twl4030-core.c -index 99cc143..38c227a 100644 ---- a/drivers/i2c/chips/twl4030-core.c -+++ b/drivers/i2c/chips/twl4030-core.c -@@ -40,6 +40,9 @@ - - #include <linux/i2c.h> - #include <linux/i2c/twl4030.h> -+#include <linux/i2c/twl4030-gpio.h> -+#include <linux/i2c/twl4030-madc.h> -+#include <linux/i2c/twl4030-pwrirq.h> - #include <linux/slab.h> - #include <linux/clk.h> - #include <linux/device.h> -@@ -114,6 +117,23 @@ - #define TWL4030_BASEADD_RTC 0x001C - #define TWL4030_BASEADD_SECURED_REG 0x0000 - -+/* TWL4030 BCI registers */ -+#define TWL4030_INTERRUPTS_BCIIMR1A 0x2 -+#define TWL4030_INTERRUPTS_BCIIMR2A 0x3 -+#define TWL4030_INTERRUPTS_BCIIMR1B 0x6 -+#define TWL4030_INTERRUPTS_BCIIMR2B 0x7 -+#define TWL4030_INTERRUPTS_BCIISR1A 0x0 -+#define TWL4030_INTERRUPTS_BCIISR2A 0x1 -+#define TWL4030_INTERRUPTS_BCIISR1B 0x4 -+#define TWL4030_INTERRUPTS_BCIISR2B 0x5 -+ -+/* TWL4030 keypad registers */ -+#define TWL4030_KEYPAD_KEYP_IMR1 0x12 -+#define TWL4030_KEYPAD_KEYP_IMR2 0x14 -+#define TWL4030_KEYPAD_KEYP_ISR1 0x11 -+#define TWL4030_KEYPAD_KEYP_ISR2 0x13 -+ -+ - /* Triton Core internal information (END) */ - - /* Few power values */ -@@ -133,12 +153,10 @@ - /* on I2C-1 for 2430SDP */ - #define CONFIG_I2C_TWL4030_ID 1 - --/* SIH_CTRL registers */ --#define TWL4030_INT_PWR_SIH_CTRL 0x07 -+/* SIH_CTRL registers that aren't defined elsewhere */ - #define TWL4030_INTERRUPTS_BCISIHCTRL 0x0d - #define TWL4030_MADC_MADC_SIH_CTRL 0x67 - #define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17 --#define TWL4030_GPIO_GPIO_SIH_CTRL 0x2d - - #define TWL4030_SIH_CTRL_COR_MASK (1 << 2) - -@@ -776,135 +794,121 @@ static void twl_init_irq(void) - * handlers present. - */ - -- -- /* PWR_IMR1 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, 0x1) < 0); -- -- /* PWR_IMR2 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, 0x3) < 0); -- -- /* Clear off any other pending interrupts on power */ -+ /* Mask INT (PWR) interrupts at TWL4030 */ -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, -+ TWL4030_INT_PWR_IMR1) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INT, 0xff, -+ TWL4030_INT_PWR_IMR2) < 0); - - /* Are PWR interrupt status bits cleared by reads or writes? */ - cor = twl4030_read_cor_bit(TWL4030_MODULE_INT, - TWL4030_INT_PWR_SIH_CTRL); - WARN_ON(cor < 0); - -- /* PWR_ISR1 */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT, 0x00, cor) < 0); -- -- /* PWR_ISR2 */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT, 0x02, cor) < 0); -+ /* Clear TWL4030 INT (PWR) ISRs */ -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT, -+ TWL4030_INT_PWR_ISR1, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INT, -+ TWL4030_INT_PWR_ISR2, cor) < 0); - - /* Slave address 0x4A */ - -- /* BCIIMR1A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x2) < 0); -- -- /* BCIIMR2A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x3) < 0); -- -- /* BCIIMR2A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x6) < 0); -- -- /* BCIIMR2B */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, 0x7) < 0); -+ /* Mask BCI interrupts at TWL4030 */ -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, -+ TWL4030_INTERRUPTS_BCIIMR1A) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, -+ TWL4030_INTERRUPTS_BCIIMR2A) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, -+ TWL4030_INTERRUPTS_BCIIMR1B) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff, -+ TWL4030_INTERRUPTS_BCIIMR2B) < 0); - - /* Are BCI interrupt status bits cleared by reads or writes? */ - cor = twl4030_read_cor_bit(TWL4030_MODULE_INTERRUPTS, - TWL4030_INTERRUPTS_BCISIHCTRL); - WARN_ON(cor < 0); - -- /* BCIISR1A */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, 0x0, cor) < 0); -- -- /* BCIISR2A */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, 0x1, cor) < 0); -- -- /* BCIISR1B */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, 0x4, cor) < 0); -- -- /* BCIISR2B */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, 0x5, cor) < 0); -+ /* Clear TWL4030 BCI ISRs */ -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, -+ TWL4030_INTERRUPTS_BCIISR1A, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, -+ TWL4030_INTERRUPTS_BCIISR2A, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, -+ TWL4030_INTERRUPTS_BCIISR1B, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_INTERRUPTS, -+ TWL4030_INTERRUPTS_BCIISR2B, cor) < 0); - - /* MAD C */ -- /* MADC_IMR1 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, 0x62) < 0); -- -- /* MADC_IMR2 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, 0x64) < 0); -+ /* Mask MADC interrupts at TWL4030 */ -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, -+ TWL4030_MADC_IMR1) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_MADC, 0xff, -+ TWL4030_MADC_IMR2) < 0); - - /* Are MADC interrupt status bits cleared by reads or writes? */ - cor = twl4030_read_cor_bit(TWL4030_MODULE_MADC, - TWL4030_MADC_MADC_SIH_CTRL); - WARN_ON(cor < 0); - -- /* MADC_ISR1 */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC, 0x61, cor) < 0); -- -- /* MADC_ISR2 */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC, 0x63, cor) < 0); -+ /* Clear TWL4030 MADC ISRs */ -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC, -+ TWL4030_MADC_ISR1, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_MADC, -+ TWL4030_MADC_ISR2, cor) < 0); - - /* key Pad */ -- /* KEYPAD - IMR1 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, 0x12) < 0); -+ /* Mask keypad interrupts at TWL4030 */ -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, -+ TWL4030_KEYPAD_KEYP_IMR1) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, -+ TWL4030_KEYPAD_KEYP_IMR2) < 0); - - /* Are keypad interrupt status bits cleared by reads or writes? */ - cor = twl4030_read_cor_bit(TWL4030_MODULE_KEYPAD, - TWL4030_KEYPAD_KEYP_SIH_CTRL); - WARN_ON(cor < 0); - -- /* KEYPAD - ISR1 */ -+ /* Clear TWL4030 keypad ISRs */ - /* XXX does this still need to be done twice for some reason? */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, 0x11, cor) < 0); -- -- /* KEYPAD - IMR2 */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, 0xff, 0x14) < 0); -- -- /* KEYPAD - ISR2 */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, 0x13, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, -+ TWL4030_KEYPAD_KEYP_ISR1, cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_KEYPAD, -+ TWL4030_KEYPAD_KEYP_ISR2, cor) < 0); - - /* Slave address 0x49 */ -- /* GPIO_IMR1A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1c) < 0); -- -- /* GPIO_IMR2A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1d) < 0); -- -- /* GPIO_IMR3A */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x1e) < 0); -- -- /* GPIO_IMR1B */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x22) < 0); - -- /* GPIO_IMR2B */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x23) < 0); -- -- /* GPIO_IMR3B */ -- WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, 0x24) < 0); -+ /* Mask GPIO interrupts at TWL4030 */ -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR1A) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR2A) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR3A) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR1B) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR2B) < 0); -+ WARN_ON(twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0xff, -+ REG_GPIO_IMR3B) < 0); - - /* Are GPIO interrupt status bits cleared by reads or writes? */ - cor = twl4030_read_cor_bit(TWL4030_MODULE_GPIO, -- TWL4030_GPIO_GPIO_SIH_CTRL); -+ REG_GPIO_SIH_CTRL); - WARN_ON(cor < 0); - -- /* GPIO_ISR1A */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x19, cor) < 0); -- -- /* GPIO_ISR2A */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x1a, cor) < 0); -- -- /* GPIO_ISR3A */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x1b, cor) < 0); -- -- /* GPIO_ISR1B */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x1f, cor) < 0); -- -- /* GPIO_ISR2B */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x20, cor) < 0); -- -- /* GPIO_ISR3B */ -- WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, 0x21, cor) < 0); -+ /* Clear TWL4030 GPIO ISRs */ -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR1A, -+ cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR2A, -+ cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR3A, -+ cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR1B, -+ cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR2B, -+ cor) < 0); -+ WARN_ON(twl4030_i2c_clear_isr(TWL4030_MODULE_GPIO, REG_GPIO_ISR3B, -+ cor) < 0); - - /* install an irq handler for each of the PIH modules */ - for (i = TWL4030_IRQ_BASE; i < TWL4030_IRQ_END; i++) { |