Updates against mainline OE

git-svn-id: https://svn.o-hand.com/repos/poky@26 311d38ba-8fff-0310-9ca6-ca027cbcb966

9 files changed, 39 insertions, 22 deletions

diff --git a/openembedded/conf/bitbake.conf b/openembedded/conf/bitbake.conf
index 04603d393d..7008ce9940 100644
--- a/openembedded/conf/bitbake.conf
+++ b/openembedded/conf/bitbake.conf
@@ -126,6 +126,7 @@ TMPDIR = "${TOPDIR}/tmp"
 CACHE = "${TMPDIR}/cache"
 DL_DIR = "${TMPDIR}/downloads"
 CVSDIR = "${DL_DIR}/cvs"
+GITDIR = "${DL_DIR}/git"
 
 STAMP = "${TMPDIR}/stamps/${PF}"
 WORKDIR = "${TMPDIR}/work/${PF}"
@@ -170,6 +171,8 @@ IMAGE_CMD_ext2 = "genext2fs -b ${IMAGE_ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_
 IMAGE_CMD_ext2.gz = "mkdir ${DEPLOY_DIR_IMAGE}/tmp.gz; genext2fs -b ${IMAGE_ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz; rmdir ${DEPLOY_DIR_IMAGE}/tmp.gz"
 IMAGE_CMD_squashfs = "mksquashfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs ${EXTRA_IMAGECMD} -noappend"
 IMAGE_CMD_tar = "cd ${IMAGE_ROOTFS} && tar -jcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.bz2 ."
+IMAGE_CMD_tar.gz = "cd ${IMAGE_ROOTFS} && tar -zcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.gz ."
+IMAGE_CMD_tar.bz2 = "cd ${IMAGE_ROOTFS} && tar -jcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.bz2 ."
 EXTRA_IMAGECMD = ""
 EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x40000"
 EXTRA_IMAGECMD_squashfs = "-le -b 16384"
diff --git a/openembedded/conf/distro/familiar-0.8.3.conf b/openembedded/conf/distro/familiar-0.8.3.conf
index 475117ceba..4b3d33dd9a 100644
--- a/openembedded/conf/distro/familiar-0.8.3.conf
+++ b/openembedded/conf/distro/familiar-0.8.3.conf
@@ -21,7 +21,7 @@ PREFERRED_PROVIDER_virtual/libiconv=glibc
 PREFERRED_PROVIDER_virtual/libintl=glibc
 PREFERRED_PROVIDER_x11=diet-x11
 
-PREFERRED_VERSION_hostap-modules ?= "0.3.9
+PREFERRED_VERSION_hostap-modules ?= "0.3.9"
 
 # The CSL compiler is unusable because
 # 1) certain programs stop to compile
@@ -37,7 +37,7 @@ PREFERRED_VERSION_gcc-cross-initial ?= "3.4.4"
 PREFERRED_PROVIDERS += " virtual/libqpe:libqpe-opie"
 PREFERRED_VERSION_qte = "2.3.10"
 
-#OPIE_VERSION = "1.2.0"
+OPIE_VERSION = "1.2.1"
 include conf/distro/preferred-opie-versions.inc
 
 #
diff --git a/openembedded/conf/distro/openzaurus-3.5.4.conf b/openembedded/conf/distro/openzaurus-3.5.4.conf
index 61458c0b03..fbc1970864 100644
--- a/openembedded/conf/distro/openzaurus-3.5.4.conf
+++ b/openembedded/conf/distro/openzaurus-3.5.4.conf
@@ -1,4 +1,4 @@
-include conf/distro/openzaurus.conf
+include conf/distro/openzaurus.inc
 DISTRO = "openzaurus"
 DISTRO_NAME = "OpenZaurus"
 DISTRO_VERSION = "3.5.3-snapshot-${DATE}"
@@ -27,6 +27,16 @@ KERNEL_CONSOLE = "ttyS0"
 #DEBUG_BUILD = "1"
 #INHIBIT_PACKAGE_STRIP = "1"
 
+PREFERRED_VERSION_gcc-cross ?= "3.4.4"
+PREFERRED_VERSION_gcc-cross-initial ?= "3.4.4"
+
+PREFERRED_VERSION_hostap-modules ?= "0.3.9"
+
+#fix some iconv issues, needs to be adjusted when doing uclibc builds
+PREFERRED_PROVIDER_virtual/libiconv=glibc
+PREFERRED_PROVIDER_virtual/libintl=glibc
+
+
 #
 # Base
 #
@@ -48,12 +58,11 @@ include conf/distro/preferred-opie-versions.inc
 #
 PREFERRED_PROVIDERS += "virtual/xserver:xserver-kdrive"
 PREFERRED_PROVIDER_x11 = "diet-x11"
-#PREFERRED_PROVIDER_x11 = "x11"
 include conf/distro/preferred-gpe-versions-2.7.inc
 
 #
 # E
 #
-include conf/distro/preferred-e-versions.inc
+#include conf/distro/preferred-e-versions.inc
 
 include conf/distro/poky-additions.inc
\ No newline at end of file
diff --git a/openembedded/conf/distro/openzaurus.conf b/openembedded/conf/distro/openzaurus.inc
index 9208aeda09..9208aeda09 100644
--- a/openembedded/conf/distro/openzaurus.conf
+++ b/openembedded/conf/distro/openzaurus.inc
diff --git a/openembedded/conf/distro/preferred-gpe-versions-2.7.inc b/openembedded/conf/distro/preferred-gpe-versions-2.7.inc
index 5919f351fb..4a3078240a 100644
--- a/openembedded/conf/distro/preferred-gpe-versions-2.7.inc
+++ b/openembedded/conf/distro/preferred-gpe-versions-2.7.inc
@@ -7,13 +7,14 @@
 
 #set some preferred providers:
 PREFERRED_PROVIDER_gconf=gconf-dbus
+PREFERRED_PROVIDER_gnome-vfs=gnome-vfs-dbus
 
 #specify versions, as the header says :)
 PREFERRED_VERSION_libmatchbox ?= "1.7"
 PREFERRED_VERSION_matchbox ?= "0.9.1"
 PREFERRED_VERSION_matchbox-common ?= "0.9.1"
 PREFERRED_VERSION_matchbox-desktop ?= "0.9.1"
-PREFERRED_VERSION_matchbox-wm ?= "0.9.5"
+PREFERRED_VERSION_matchbox-wm ?= "0.9.5+cvs-${CVSDATE}"
 PREFERRED_VERSION_matchbox-panel ?= "0.9.2"
 PREFERRED_VERSION_matchbox-applet-inputmanager ?= "0.6"
 PREFERRED_VERSION_atk ?= "1.9.0"
@@ -49,7 +50,7 @@ PREFERRED_VERSION_gpe-today ?= "0.09"
 PREFERRED_VERSION_matchbox-panel-manager ?= "0.1"
 PREFERRED_VERSION_dbus ?= "0.23.4"
 PREFERRED_VERSION_gpe-beam ?= "0.2.8" 
-PREFERRED_VERSION_gpe-bluetooth ?= "0.44"
+PREFERRED_VERSION_gpe-bluetooth ?= "0.45"
 PREFERRED_VERSION_gpe-su ?= "0.18"
 PREFERRED_VERSION_gpe-conf ?= "0.1.25"
 PREFERRED_VERSION_gpe-clock ?= "0.21"
@@ -86,7 +87,7 @@ PREFERRED_VERSION_minimo ?= "0.0cvs${CVSDATE_minimo}"
 PREFERRED_VERSION_linphone-hh ?= "0.12.2.hh1"
 PREFERRED_VERSION_linphone ?= "0.12.2"
 PREFERRED_VERSION_firefox ?= "1.0"
-PREFERRED_VERSION_gaim ?= "2.0.0-cvs-mco1"
+PREFERRED_VERSION_gaim ?= "2.0.0-cvs-mco1-20050904"
 PREFERRED_VERSION_poppler ?= "0.3.3"
 PREFERRED_VERSION_evince ?= "0.3.2"
 PREFERRED_VERSION_gpe_mini_browser ?= "0.15"
diff --git a/openembedded/conf/local.conf.sample b/openembedded/conf/local.conf.sample
index 52a0d5f120..49b66b2e50 100644
--- a/openembedded/conf/local.conf.sample
+++ b/openembedded/conf/local.conf.sample
@@ -3,6 +3,7 @@
 # This file is not used, see build/conf/local.conf instead
 #
 # XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
+
 #
 # OpenEmbedded local configuration file (sample)
 #
@@ -25,12 +26,11 @@
 # expansion.  Stuff like starting with ${HOME} or ${TOPDIR} is ok).
 
 # Use this to specify where BitBake should place the downloaded sources into
-DL_DIR = "POKYROOT/sources"
+DL_DIR = "${HOME}/sources"
 
 # Delete the line below. Then specify which .bb files to consider for
 # your build. Typically this will be something like BBFILES = "/path/to/openembedded/packages/*/*.bb"
-#BBFILES := "${@bb.fatal('Edit your conf/local.conf: BBFILES')}"
-BBFILES := "POKYROOT/openembedded/packages/*/*.bb"
+BBFILES := "${@bb.fatal('Edit your conf/local.conf: BBFILES')}"
 
 # Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files
 # This is a regulary expression, so be sure to get your parenthesis balanced.
@@ -77,7 +77,8 @@ PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
 
 # Uncomment this to select a distribution policy. See the conf directory
 # for distributions currently known to OpenEmbedded.
-# DISTRO = "familiar"
+# Stay away from unversioned distros unless you really know what you are doing
+# DISTRO = "familiar-0.8.3"
 
 # Uncomment this to select a particular kernel version if supported by 
 # your MACHINE setting. Currently only supported on Zaurus Clamshells.
@@ -88,7 +89,7 @@ PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
 # INHERIT = "package_ipk"
 # INHERIT = "package_tar"
 
-# Add the required image file system types below. Valid are jffs2, tar, cramfs
+# Add the required image file system types below. Valid are jffs2, tar, cramfs and ext2
 IMAGE_FSTYPES = "jffs2 tar"
 
 # Uncomment this to disable the parse cache (not recommended).
@@ -97,7 +98,8 @@ IMAGE_FSTYPES = "jffs2 tar"
 # Uncomment this if you want BitBake to emit debugging output
 # BBDEBUG = "yes"
 
-# Uncomment these two if you want BitBake to build images useful for debugging.
+# Uncomment these two if you want BitBake to build images useful for debugging. 
+# Note that INHIBIT_PACKAGE_STRIP needs a package format to be defined
 # DEBUG_BUILD = "1"
 # INHIBIT_PACKAGE_STRIP = "1"
 
@@ -125,4 +127,4 @@ BBINCLUDELOGS = "yes"
 CVS_TARBALL_STASH = "http://www.oesources.org/source/current/"
 
 # EDIT THIS FILE and then remove the line below before using!
-#REMOVE_THIS_LINE:="${@oe.fatal('Read the comments in your conf/local.conf')}"
+REMOVE_THIS_LINE:="${@oe.fatal('Read the comments in your conf/local.conf')}"
diff --git a/openembedded/conf/machine/ipaq-pxa270.conf b/openembedded/conf/machine/ipaq-pxa270.conf
index 0565b897b7..ec2b1beb02 100644
--- a/openembedded/conf/machine/ipaq-pxa270.conf
+++ b/openembedded/conf/machine/ipaq-pxa270.conf
@@ -5,6 +5,7 @@
 TARGET_ARCH = "arm"
 IPKG_ARCHS = "all arm armv4 armv5te ipaqpxa hx4700"
 PREFERRED_PROVIDER_virtual/kernel = "handhelds-pxa-2.6"
+PREFERRED_VERSIONS_handhelds-pxa-2.6 = "2.6.12-hh3"
 
 PREFERRED_VERSION_orinoco-modules = "0.15rc1"
 
@@ -24,14 +25,14 @@ include conf/machine/ipaq-common.conf
 include conf/machine/handheld-common.conf
 
 GUI_MACHINE_CLASS = "bigscreen"
-GPE_EXTRA_DEPENDS += "gaim sylpheed gpe-filemanager gpe-nmf evince"
-GPE_EXTRA_INSTALL += "gaim sylpheed gpe-filemanager gpe-nmf evince"
+GPE_EXTRA_DEPENDS += "gaim sylpheed" 
+GPE_EXTRA_INSTALL += "gaim sylpheed"
 
 # Use tune-xscale per default. Machine independent feeds should be built with tune-strongarm.
 include conf/machine/tune-xscale.conf
 
 BOOTSTRAP_EXTRA_RDEPENDS += "${@linux_module_packages('${HX4700_MODULES}', d)}"
-HX4700_MODULES = "asic3_mmc hx4700_bt hx4700_leds hx4700_navpt hx4700_pcmcia \
+HX4700_MODULES = "i2c-pxa asic3_mmc hx4700_bt hx4700_leds hx4700_navpt hx4700_pcmcia \
                   hx4700_ts hx4700_wlan snd_pxa_i2sound_hx4700 hx4700_power"
 
 module_autoload_hx4700_power = "hx4700_power"
diff --git a/openembedded/conf/machine/spitz.conf b/openembedded/conf/machine/spitz.conf
index 6e6ea7f605..79ce0c4193 100644
--- a/openembedded/conf/machine/spitz.conf
+++ b/openembedded/conf/machine/spitz.conf
@@ -15,6 +15,6 @@ PIVOTBOOT_EXTRA_RRECOMMENDS += ""
 BOOTSTRAP_EXTRA_DEPENDS  += "hdparm e2fsprogs"
 BOOTSTRAP_EXTRA_RDEPENDS += "hdparm e2fsprogs e2fsprogs-e2fsck e2fsprogs-mke2fs"
 
-IMAGE_FSTYPES = "jffs2 tar"
+IMAGE_FSTYPES = "jffs2 tar.gz"
 
 ROOT_FLASH_SIZE = "100"
diff --git a/openembedded/conf/machine/zaurus-clamshell-2.6.conf b/openembedded/conf/machine/zaurus-clamshell-2.6.conf
index 516b07ee15..a26ae7754f 100644
--- a/openembedded/conf/machine/zaurus-clamshell-2.6.conf
+++ b/openembedded/conf/machine/zaurus-clamshell-2.6.conf
@@ -2,13 +2,12 @@
 # Don't forget to include zaurus-clamshell.conf as well
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus"
-PREFERRED_VERSION_orinoco-modules = "0.15rc1"
 
-BOOTSTRAP_EXTRA_DEPENDS  += "virtual/kernel udev sysfsutils hostap-modules orinoco-modules \
+BOOTSTRAP_EXTRA_DEPENDS  += "virtual/kernel udev sysfsutils hostap-modules spectrum-fw \
 pcmcia-cs apmd wireless-tools console-tools irda-utils lrzsz hostap-utils prism3-firmware prism3-support \
 ppp ppp-dialin openswan wpa-supplicant-nossl"
 
-BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils hostap-modules-cs orinoco-modules-cs \
+BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils hostap-modules-cs spectrum-fw \
 pcmcia-cs apm  wireless-tools irda-utils udev-utils console-tools hostap-utils prism3-firmware prism3-support \
 ppp ppp-dialin openswan wpa-supplicant-nossl"
 
@@ -34,3 +33,5 @@ BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pxaficp-ir kernel-module-irda kernel-
 BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-gadgetfs kernel-module-g-file-storage \
                              kernel-module-g-serial kernel-module-g-ether"
 
+# Wireless Modules
+BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-orinoco-cs kernel-module-spectrum-cs"