BerkleyDB: Uprev db from 4.2 to 5.1.19

The latest version of Berkley DB (5.1.19) is required by RPM.  This version
is backwards compatible with the 4.2 version that was enabled previously.

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>

5 files changed, 63 insertions, 168 deletions

diff --git a/meta/recipes-support/db/db/arm-thumb-mutex.patch b/meta/recipes-support/db/db/arm-thumb-mutex.patch
deleted file mode 100644
index acd446fcd8..0000000000
--- a/meta/recipes-support/db/db/arm-thumb-mutex.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- db-4.3.29-dist/../dbinc/mutex.h	2005-11-15 07:33:27.761042518 -0800
-+++ db-4.3.29-dist/../dbinc/mutex.h	2005-11-15 07:55:24.823920060 -0800
-@@ -470,6 +470,25 @@
- #ifdef LOAD_ACTUAL_MUTEX_CODE
- #define	MUTEX_SET_TEST	1		/* gcc/arm: 0 is clear, 1 is set. */
- 
-+#if defined __thumb__
-+#define	MUTEX_SET(tsl) ({						\
-+	int __r, __p;							\
-+	asm volatile(							\
-+		".align	2\n\t"						\
-+		"bx	pc\n\t"						\
-+		"nop\n\t"						\
-+		".arm\n\t"						\
-+		"swpb	%0, %2, [%3]\n\t"				\
-+		"eor	%0, %0, #1\n\t"					\
-+		"orr	%1, pc, #1\n\t"					\
-+		"bx	%1\n\t"						\
-+		".force_thumb"						\
-+	    : "=&r" (__r), "=r" (__p)					\
-+	    : "r" (1), "r" (tsl)					\
-+	    );								\
-+	__r & 1;							\
-+})
-+#else
- #define	MUTEX_SET(tsl) ({						\
- 	int __r;							\
- 	asm volatile(							\
-@@ -480,6 +499,7 @@
- 	    );								\
- 	__r & 1;							\
- })
-+#endif
- 
- #define	MUTEX_UNSET(tsl)	(*(volatile tsl_t *)(tsl) = 0)
- #define	MUTEX_INIT(tsl)		MUTEX_UNSET(tsl)
diff --git a/meta/recipes-support/db/db/arm-thumb-mutex_db5.patch b/meta/recipes-support/db/db/arm-thumb-mutex_db5.patch
new file mode 100644
index 0000000000..37d0d93abd
--- /dev/null
+++ b/meta/recipes-support/db/db/arm-thumb-mutex_db5.patch
@@ -0,0 +1,36 @@
+--- db-5.1.19/../src/dbinc/mutex_int.h.orig	2011-01-05 19:21:42.181805366 -0600
++++ db-5.1.19/../src/dbinc/mutex_int.h	2011-01-05 19:24:53.141853117 -0600
+@@ -474,6 +474,25 @@
+ 
+ #ifdef LOAD_ACTUAL_MUTEX_CODE
+ /* gcc/arm: 0 is clear, 1 is set. */
++#if defined __thumb__
++#define	MUTEX_SET(tsl) ({						\
++	int __r, __p;							\
++	__asm__ volatile(						\
++		".align 2\n\t"                                          \
++		"bx     pc\n\t"                                         \
++		"nop\n\t"                                               \
++		".arm\n\t"                                              \
++		"swpb   %0, %2, [%3]\n\t"                               \
++		"eor    %0, %0, #1\n\t"                                 \
++		"orr    %1, pc, #1\n\t"                                 \
++		"bx     %1\n\t"                                         \
++		".force_thumb"                                          \
++	    : "=&r" (__r), "=r" (__p)                                   \
++	    : "r" (1), "r" (tsl)                                        \
++	    );                                                          \
++	__r & 1;							\
++})
++#else
+ #define	MUTEX_SET(tsl) ({						\
+ 	int __r;							\
+ 	__asm__ volatile(						\
+@@ -484,6 +503,7 @@
+ 	    );								\
+ 	__r & 1;							\
+ })
++#endif
+ 
+ #define	MUTEX_UNSET(tsl)	(*(volatile tsl_t *)(tsl) = 0)
+ #define	MUTEX_INIT(tsl)         (MUTEX_UNSET(tsl), 0)
diff --git a/meta/recipes-support/db/db/configure_fixes.patch b/meta/recipes-support/db/db/configure_fixes.patch
deleted file mode 100644
index 80aa0e7c1c..0000000000
--- a/meta/recipes-support/db/db/configure_fixes.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-If LD is a binary name + parameters db will fail to work out its GNU ld
-and disable shared libraries. We don't want this.
-
-RP - 22/11/2007
-
-Index: dist/configure
-===================================================================
---- dist.orig/configure	2007-11-23 00:47:27.000000000 +0000
-+++ dist/configure	2007-11-23 00:53:22.000000000 +0000
-@@ -5658,7 +5661,7 @@ if test "${lt_cv_prog_gnu_ld+set}" = set
-   echo $ECHO_N "(cached) $ECHO_C" >&6
- else
-   # I'd rather use --version here, but apparently some GNU ld's only accept -v.
--case `"$LD" -v 2>&1 </dev/null` in
-+case `$LD -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
-   lt_cv_prog_gnu_ld=yes
-   ;;
diff --git a/meta/recipes-support/db/db_4.2.52.bb b/meta/recipes-support/db/db_4.2.52.bb
deleted file mode 100644
index 1181bb05f9..0000000000
--- a/meta/recipes-support/db/db_4.2.52.bb
+++ /dev/null
@@ -1,102 +0,0 @@
-# Version 4 of the Berkeley DB from Sleepycat
-#
-# At present this package only installs the DB code
-# itself (shared libraries, .a in the dev package),
-# documentation and headers.
-#
-# The headers have the same names as those as v3
-# of the DB, only one version can be used *for dev*
-# at once - DB3 and DB4 can both be installed on the
-# same system at the same time if really necessary.
-SECTION = "libs"
-DESCRIPTION = "Berkeley DB v4."
-HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
-LICENSE = "BSD Sleepycat"
-VIRTUAL_NAME = "virtual/db"
-VIRTUAL_NAME_virtclass-native = "virtual/db-native"
-
-LIC_FILES_CHKSUM = "file://../LICENSE;md5=6b31228067ad1236eceaaaf187ad6d1e"
-
-CONFLICTS = "db3"
-CONFLICTS_virtclass-native = "db3-native"
-PR = "r8"
-
-SRC_URI = "http://download.oracle.com/berkeley-db/db-${PV}.tar.gz \
-           file://configure_fixes.patch;patch=1 "
-
-SRC_URI[md5sum] = "8b5cff6eb83972afdd8e0b821703c33c"
-SRC_URI[sha256sum] = "f4bddd8d1b4cde0daf5e13e3493ed62a25b736b0bf258e1d929e47bc6a82a28c"
-#SRC_URI_MD5 = "http://downloads.sleepycat.com/db-${PV}.tar.gz.md5"
-#TODO SRC_URI += "file://arm-thumb-mutex.patch;patch=1"
-
-inherit autotools
-
-# Put virtual/db in any appropriate provider of a
-# relational database, use it as a dependency in
-# place of a specific db and use:
-#
-# PREFERRED_PROVIDER_virtual/db
-#
-# to select the correct db in the build (distro) .conf
-PROVIDES += "${VIRTUAL_NAME}"
-
-# bitbake isn't quite clever enough to deal with sleepycat,
-# the distribution sits in the expected directory, but all
-# the builds must occur from a sub-directory.  The following
-# persuades bitbake to go to the right place
-S = "${WORKDIR}/db-${PV}/dist"
-B = "${WORKDIR}/db-${PV}/build_unix"
-
-# The executables go in a separate package - typically there
-# is no need to install these unless doing real database
-# management on the system.
-PACKAGES += " ${PN}-bin"
-
-# Package contents
-FILES_${PN} = "${libdir}/libdb-4*so*"
-FILES_${PN}-bin = "${bindir}/*"
-# The dev package has the .so link (as in db3) and the .a's -
-# it is therefore incompatible (cannot be installed at the
-# same time) as the db3 package
-FILES_${PN}-dev = "${includedir} ${libdir}/*"
-
-#configuration - set in local.conf to override
-DB4_CONFIG ?= " --disable-cryptography --disable-queue --disable-replication --disable-verify --enable-hash"
-EXTRA_OECONF = "${DB4_CONFIG}"
-
-# Override the MUTEX setting here, the POSIX library is
-# the default - "POSIX/pthreads/library".
-# Don't ignore the nice SWP instruction on the ARM:
-# These enable the ARM assembler mutex code, this won't
-# work with thumb compilation...
-ARM_MUTEX = "--with-mutex=ARM/gcc-assembly"
-MUTEX = ""
-MUTEX_arm = "${ARM_MUTEX}"
-MUTEX_armeb = "${ARM_MUTEX}"
-EXTRA_OECONF += "${MUTEX}"
-
-ARM_INSTRUCTION_SET = "arm"
-
-# Cancel the site stuff - it's set for db3 and destroys the
-# configure.
-CONFIG_SITE = ""
-do_configure() {
-	rm -f ${S}/config.sub
-	cp ${STAGING_DATADIR_NATIVE}/gnu-config/config.sub ${S}/config.sub 
-	oe_runconf
-}
-
-do_install_append() {
-	# The docs end up in /usr/docs - not right.
-	if test -d "${D}/${prefix}/docs"
-	then
-		mkdir -p "${D}/${datadir}"
-		test ! -d "${D}/${docdir}" || rm -rf "${D}/${docdir}"
-		mv "${D}/${prefix}/docs" "${D}/${docdir}"
-	fi
-}
-
-# The db package contains symlinks that trip up insane
-INSANE_SKIP_db = "1"
-
-BBCLASSEXTEND = "native nativesdk"
diff --git a/meta/recipes-support/db/db_4.3.29.bb b/meta/recipes-support/db/db_5.1.19.bb
index 04a6680f07..919e532be1 100644
--- a/meta/recipes-support/db/db_4.3.29.bb
+++ b/meta/recipes-support/db/db_5.1.19.bb
@@ -1,7 +1,4 @@
-# Has issues with eds
-DEFAULT_PREFERENCE = "-1"
-
-# Version 4 of the Berkeley DB from Sleepycat
+# Version 5 of the Berkeley DB from Sleepycat
 #
 # At present this package only installs the DB code
 # itself (shared libraries, .a in the dev package),
@@ -9,19 +6,24 @@ DEFAULT_PREFERENCE = "-1"
 #
 # The headers have the same names as those as v3
 # of the DB, only one version can be used *for dev*
-# at once - DB3 and DB4 can both be installed on the
+# at once - DB3 and DB5 can both be installed on the
 # same system at the same time if really necessary.
 SECTION = "libs"
-DESCRIPTION = "Berkeley DB v4."
+DESCRIPTION = "Berkeley DB v5."
 HOMEPAGE = "http://www.oracle.com/technology/products/berkeley-db/db/index.html"
 LICENSE = "BSD Sleepycat"
 VIRTUAL_NAME ?= "virtual/db"
 CONFLICTS = "db3"
-PR = "r8"
+PR = "r1"
 
 SRC_URI = "http://download.oracle.com/berkeley-db/db-${PV}.tar.gz"
 #SRC_URI_MD5 = "http://downloads.sleepycat.com/db-${PV}.tar.gz.md5"
-SRC_URI += "file://arm-thumb-mutex.patch;patch=1"
+SRC_URI += "file://arm-thumb-mutex_db5.patch;patch=1"
+
+SRC_URI[md5sum] = "76fcbfeebfcd09ba0b4d96bfdf8d884d"
+SRC_URI[sha256sum] = "0194d4ca9266ba1a1c0bfbc233b18bfd05f63163453c81ebcdfdc7112d5ac850"
+
+LIC_FILES_CHKSUM = "file://../LICENSE;md5=86f9294f39f38ef9e89690bcd2320e7a"
 
 inherit autotools
 
@@ -47,7 +49,7 @@ B = "${WORKDIR}/db-${PV}/build_unix"
 PACKAGES += " ${PN}-bin"
 
 # Package contents
-FILES_${PN} = "${libdir}/libdb-4*so*"
+FILES_${PN} = "${libdir}/libdb-5*so*"
 FILES_${PN}-bin = "${bindir}/*"
 # The dev package has the .so link (as in db3) and the .a's -
 # it is therefore incompatible (cannot be installed at the
@@ -56,9 +58,9 @@ FILES_${PN}-dev = "${includedir} ${libdir}/*"
 
 #configuration - set in local.conf to override
 # All the --disable-* options replace --enable-smallbuild, which breaks a bunch of stuff (eg. postfix)
-DB4_CONFIG ?= "--enable-o_direct --disable-cryptography --disable-queue --disable-replication --disable-statistics --disable-verify --enable-compat185"
+DB5_CONFIG ?= "--enable-o_direct --disable-cryptography --disable-queue --disable-replication --disable-statistics --disable-verify --disable-compat185 --disable-sql"
 
-EXTRA_OECONF = "${DB4_CONFIG}"
+EXTRA_OECONF = "${DB5_CONFIG}"
 
 # Override the MUTEX setting here, the POSIX library is
 # the default - "POSIX/pthreads/library".
@@ -79,11 +81,24 @@ do_configure() {
 }
 
 do_install_append() {
+	mkdir -p ${D}/${includedir}/db51
+	#mv ${D}/${includedir}/db_185.h ${D}/${includedir}/db51/.
+	mv ${D}/${includedir}/db.h ${D}/${includedir}/db51/.
+	mv ${D}/${includedir}/db_cxx.h ${D}/${includedir}/db51/.
+	#mv ${D}/${includedir}/dbsql.h ${D}/${includedir}/db51/.
+	#ln -s db51/db_185.h ${D}/${includedir}/db_185.h
+	ln -s db51/db.h ${D}/${includedir}/db.h
+	ln -s db51/db_cxx.h ${D}/${includedir}/db_cxx.h
+	#ln -s db51/dbsql.h ${D}/${includedir}/dbsql.h
+
 	# The docs end up in /usr/docs - not right.
 	if test -d "${D}/${prefix}/docs"
 	then
 		mkdir -p "${D}/${datadir}"
-		test ! -d "${D}/${docdir}" || rmdir "${D}/${docdir}"
+		test ! -d "${D}/${docdir}" || rm -rf "${D}/${docdir}"
 		mv "${D}/${prefix}/docs" "${D}/${docdir}"
 	fi
 }
+
+BBCLASSEXTEND = "native nativesdk"
+