linux-yocto/3.8: qemumips graphical boot

Updating the meta SRCREV to fix and illegal instruction that is seen
when launching X with USB pointing devices.

    meta/qemumips: build USB_UHCI_HCD into the kernel

    When booting qemumips and USB_UHCI_HCD built as a module, the following
    trace is seen, and then prevents X from starting:

       qemumips user.warn kernel: Call Trace:
       qemumips user.warn kernel: [<c0028000>] uhci_check_bandwidth+0x0/0x160 [uhci_hcd]
       qemumips user.warn kernel: [<c002e08c>] uhci_urb_enqueue+0xba4/0xc48 [uhci_hcd]
       qemumips user.warn kernel: [<8058092c>] usb_hcd_submit_urb+0xdc/0x848
       qemumips user.warn kernel: [<805b8fbc>] wacom_open+0x44/0x8c
       qemumips user.warn kernel: [<805a1990>] input_open_device+0xac/0xec
       qemumips user.warn kernel: [<805a8cec>] evdev_open+0x188/0x1bc
       qemumips user.warn kernel: [<802331d8>] chrdev_open+0xc8/0x1c4
       qemumips user.warn kernel: [<8022b338>] do_dentry_open+0x248/0x2e4
       qemumips user.warn kernel: [<8022b418>] finish_open+0x44/0x68
       qemumips user.warn kernel: [<8023e51c>] do_last.isra.29+0x2c0/0xcbc
       qemumips user.warn kernel: [<8023efd8>] path_openat+0xc0/0x52c
       qemumips user.warn kernel: [<8023f840>] do_filp_open+0x4c/0xbc
       qemumips user.warn kernel: [<8022cc3c>] do_sys_open+0x128/0x20c
       qemumips user.warn kernel: [<8010c07c>] stack_done+0x20/0x44
       qemumips user.warn kernel: Code: (Bad address in epc)
       qemumips user.warn kernel: ---[ end trace 8a48c6046870f8c2 ]---

    Building the module into the kernel fixes the problem, but the root
    cause is still under investigation. The pipelines around jumps to
    module addresses seem to be triggering invalid instructions.

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

0 files changed, 0 insertions, 0 deletions