linux-rp: Sync with OE

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2654 311d38ba-8fff-0310-9ca6-ca027cbcb966

7 files changed, 602 insertions, 41 deletions

diff --git a/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch b/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch
index 9ece71331a..bf20f46a05 100644
--- a/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch
+++ b/meta/packages/linux/linux-rp-2.6.20/pxa-serial-hack.patch
@@ -5,28 +5,38 @@
  include/linux/serial_core.h  |    1 +
  4 files changed, 16 insertions(+), 3 deletions(-)
 
-Index: git/drivers/serial/8250.c
+Index: linux-2.6.20/drivers/serial/8250.c
 ===================================================================
---- git.orig/drivers/serial/8250.c	2006-10-31 16:29:50.000000000 +0000
-+++ git/drivers/serial/8250.c	2006-10-31 16:29:53.000000000 +0000
-@@ -2429,7 +2429,12 @@ static struct uart_driver serial8250_reg
+--- linux-2.6.20.orig/drivers/serial/8250.c	2007-04-27 13:37:26.000000000 +0100
++++ linux-2.6.20/drivers/serial/8250.c	2007-04-27 13:38:16.000000000 +0100
+@@ -2429,7 +2429,12 @@
  	.driver_name		= "serial",
  	.dev_name		= "ttyS",
  	.major			= TTY_MAJOR,
 +#ifdef CONFIG_SERIAL_PXA
-+	.minor			= 64 + 3,
-+	.name_base		= 3,
++	.minor			= 64 + 4,
++	.name_base		= 4,
 +#else
  	.minor			= 64,
 +#endif
  	.nr			= UART_NR,
  	.cons			= SERIAL8250_CONSOLE,
  };
-Index: git/drivers/serial/serial_core.c
+Index: linux-2.6.20/drivers/serial/serial_core.c
 ===================================================================
---- git.orig/drivers/serial/serial_core.c	2006-10-31 16:09:17.000000000 +0000
-+++ git/drivers/serial/serial_core.c	2006-10-31 16:29:53.000000000 +0000
-@@ -2183,6 +2183,7 @@ int uart_register_driver(struct uart_dri
+--- linux-2.6.20.orig/drivers/serial/serial_core.c	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/drivers/serial/serial_core.c	2007-04-27 13:39:39.000000000 +0100
+@@ -2068,7 +2068,8 @@
+ 	printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
+ 	       port->dev ? port->dev->bus_id : "",
+ 	       port->dev ? ": " : "",
+-	       drv->dev_name, port->line, address, port->irq, uart_type(port));
++	       drv->dev_name, port->line + drv->name_base, address, port->irq,
++	       uart_type(port));
+ }
+ 
+ static void
+@@ -2183,6 +2184,7 @@
  	normal->owner		= drv->owner;
  	normal->driver_name	= drv->driver_name;
  	normal->name		= drv->dev_name;
@@ -34,11 +44,11 @@ Index: git/drivers/serial/serial_core.c
  	normal->major		= drv->major;
  	normal->minor_start	= drv->minor;
  	normal->type		= TTY_DRIVER_TYPE_SERIAL;
-Index: git/include/linux/serial_core.h
+Index: linux-2.6.20/include/linux/serial_core.h
 ===================================================================
---- git.orig/include/linux/serial_core.h	2006-10-31 16:09:45.000000000 +0000
-+++ git/include/linux/serial_core.h	2006-10-31 16:30:36.000000000 +0000
-@@ -339,6 +339,7 @@ struct uart_driver {
+--- linux-2.6.20.orig/include/linux/serial_core.h	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/include/linux/serial_core.h	2007-04-27 13:37:27.000000000 +0100
+@@ -341,6 +341,7 @@
  	struct module		*owner;
  	const char		*driver_name;
  	const char		*dev_name;
@@ -46,11 +56,11 @@ Index: git/include/linux/serial_core.h
  	int			 major;
  	int			 minor;
  	int			 nr;
-Index: git/drivers/serial/serial_cs.c
+Index: linux-2.6.20/drivers/serial/serial_cs.c
 ===================================================================
---- git.orig/drivers/serial/serial_cs.c	2006-10-31 16:09:17.000000000 +0000
-+++ git/drivers/serial/serial_cs.c	2006-10-31 16:29:53.000000000 +0000
-@@ -390,7 +390,7 @@ static int setup_serial(struct pcmcia_de
+--- linux-2.6.20.orig/drivers/serial/serial_cs.c	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/drivers/serial/serial_cs.c	2007-04-27 13:40:34.000000000 +0100
+@@ -390,7 +390,7 @@
  			kio_addr_t iobase, int irq)
  {
  	struct uart_port port;
@@ -59,12 +69,12 @@ Index: git/drivers/serial/serial_cs.c
  
  	memset(&port, 0, sizeof (struct uart_port));
  	port.iobase = iobase;
-@@ -411,10 +411,16 @@ static int setup_serial(struct pcmcia_de
+@@ -411,10 +411,16 @@
  		return -EINVAL;
  	}
  
 +#if CONFIG_SERIAL_PXA
-+	linestart = 3;
++	linestart = 4;
 +#else
 +	linestart = 0;
 +#endif
diff --git a/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch b/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch
index 8230d53392..da83fdf5eb 100644
--- a/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch
+++ b/meta/packages/linux/linux-rp-2.6.20/sharpsl-rc-r1.patch
@@ -298,7 +298,7 @@ Index: linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c
 +	pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN);
 +	ret = request_irq(REMOTE_IRQ_INT,
 +					  sharpsl_rc_interrupt,
-+					  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SHARED,
++					  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
 +					  "sharpsl_rc",
 +					  sharpsl_rc);
 +	if (ret < 0) {
diff --git a/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch b/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch
new file mode 100644
index 0000000000..b5439c62e7
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.21/connectplus-prevent-oops-HACK.patch
@@ -0,0 +1,17 @@
+Index: linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c
+===================================================================
+--- linux-2.6.21.orig/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:45:39.000000000 +0100
++++ linux-2.6.21/drivers/net/wireless/hostap/hostap_hw.c	2007-07-07 12:47:30.000000000 +0100
+@@ -2666,6 +2666,12 @@
+ 	iface = netdev_priv(dev);
+ 	local = iface->local;
+ 
++	if(dev->base_addr == 0)
++	{
++		printk(KERN_DEBUG "%s: IRQ before base_addr set\n", dev->name);
++		return IRQ_HANDLED;
++	}
++
+ 	prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
+ 
+ 	if (local->func->card_present && !local->func->card_present(local)) {
diff --git a/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz b/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz
index 3dd84eac46..ce9b90066b 100644
--- a/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz
+++ b/meta/packages/linux/linux-rp-2.6.21/defconfig-spitz
@@ -1778,3 +1778,4 @@ CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_SHARPSL_RC=m
\ No newline at end of file
diff --git a/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch b/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch
new file mode 100644
index 0000000000..da83fdf5eb
--- /dev/null
+++ b/meta/packages/linux/linux-rp-2.6.21/sharpsl-rc-r1.patch
@@ -0,0 +1,519 @@
+Index: linux-2.6.20/arch/arm/mach-pxa/spitz.c
+===================================================================
+--- linux-2.6.20.orig/arch/arm/mach-pxa/spitz.c
++++ linux-2.6.20/arch/arm/mach-pxa/spitz.c
+@@ -244,6 +244,13 @@ static struct platform_device spitzkbd_d
+ 	.id		= -1,
+ };
+ 
++/*
++ * Spitz Remote Control Device
++ */
++static struct platform_device sharpsl_rc_device = {
++	.name		= "sharpsl-remote-control",
++	.id		= -1,
++};
+ 
+ /*
+  * Spitz LEDs
+@@ -476,6 +483,7 @@ static struct platform_device *devices[]
+ 	&spitzscoop_device,
+ 	&spitzssp_device,
+ 	&spitzkbd_device,
++	&sharpsl_rc_device,
+ 	&spitzts_device,
+ 	&spitzbl_device,
+ 	&spitzled_device,
+Index: linux-2.6.20/drivers/input/keyboard/Kconfig
+===================================================================
+--- linux-2.6.20.orig/drivers/input/keyboard/Kconfig
++++ linux-2.6.20/drivers/input/keyboard/Kconfig
+@@ -154,6 +154,17 @@ config KEYBOARD_SPITZ
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called spitzkbd.
+ 
++config SHARPSL_RC
++	tristate "Sharp SL-Cxx00 Remote Control"
++	depends on PXA_SHARPSL
++	default y
++	help
++	  Say Y here to enable the remote on the Sharp Zaurus SL-Cxx00,
++	  SL-C1000, SL-C3000 and Sl-C3100 series of PDAs.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called sharpsl_rc.
++
+ config KEYBOARD_AMIGA
+ 	tristate "Amiga keyboard"
+ 	depends on AMIGA
+Index: linux-2.6.20/drivers/input/keyboard/Makefile
+===================================================================
+--- linux-2.6.20.orig/drivers/input/keyboard/Makefile
++++ linux-2.6.20/drivers/input/keyboard/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_NEWTON)		+= newton
+ obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
+ obj-$(CONFIG_KEYBOARD_CORGI)		+= corgikbd.o
+ obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
++obj-$(CONFIG_SHARPSL_RC)			+= sharpsl_rc.o
+ obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
+ obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+ obj-$(CONFIG_KEYBOARD_OMAP)             += omap-keypad.o
+Index: linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c
+===================================================================
+--- /dev/null
++++ linux-2.6.20/drivers/input/keyboard/sharpsl_rc.c
+@@ -0,0 +1,291 @@
++/*
++ *  Keyboard driver for Sharp Clamshell Models (SL-Cxx00)
++ *
++ *  Copyright (c) 2004-2005 Richard Purdie
++ *
++ *  Based on corgikbd.c and Sharp's RC driver
++ *
++ *  This program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License version 2 as
++ *  published by the Free Software Foundation.
++ *
++ */
++
++#define DEBUG 1
++#include <linux/delay.h>
++#include <linux/platform_device.h>
++#include <linux/init.h>
++#include <linux/input.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/module.h>
++#include <linux/slab.h>
++
++#ifdef CONFIG_MACH_SPITZ
++#include <asm/arch/spitz.h>
++#endif
++#ifdef CONFIG_MACH_CORGI
++#include <asm/arch/corgi.h>
++#endif
++
++#include <asm/arch/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/hardware/scoop.h>
++#include <asm/arch/sharpsl.h>
++#include <asm/hardware/sharpsl_pm.h>
++
++#define DPRINTK(fmt, args...) dev_dbg(data->dev, fmt "\n", ##args)
++
++struct remote_control_key {
++	unsigned char min;
++	unsigned char max;
++	unsigned char key;
++};
++
++#ifdef CONFIG_MACH_SPITZ
++#define REMOTE_AKIN_PULLUP SPITZ_SCP2_AKIN_PULLUP
++#define REMOTE_SCOOP_DEVICE spitzscoop2_device
++#define REMOTE_GPIO_INT SPITZ_GPIO_AK_INT
++#define REMOTE_IRQ_INT SPITZ_IRQ_GPIO_AK_INT
++static struct remote_control_key remote_keys[] = {
++	{ 25, 35, KEY_STOPCD},
++	{ 55, 65, KEY_PLAYPAUSE},
++	{ 85, 95, KEY_NEXTSONG},
++	{ 115, 125, KEY_VOLUMEUP},
++	{ 145, 155, KEY_PREVIOUSSONG},
++	{ 180, 190, KEY_MUTE},
++	{ 215, 225, KEY_VOLUMEDOWN},
++};
++#endif
++#ifdef CONFIG_MACH_CORGI
++#define REMOTE_AKIN_PULLUP CORGI_SCP_AKIN_PULLUP
++#define REMOTE_SCOOP_DEVICE corgiscoop_device
++#define REMOTE_GPIO_INT CORGI_GPIO_AK_INT
++#define REMOTE_IRQ_INT CORGI_IRQ_GPIO_AK_INT
++static struct remote_control_key remote_keys[] = {
++    //These need to be fixed for the CE-RH1's values
++	{ 25, 35, KEY_STOPCD},
++	{ 55, 65, KEY_PLAYPAUSE},
++	{ 85, 95, KEY_NEXTSONG},
++	{ 115, 125, KEY_VOLUMEUP},
++	{ 145, 155, KEY_PREVIOUSSONG},
++	{ 180, 190, KEY_MUTE},
++	{ 215, 225, KEY_VOLUMEDOWN},
++};
++#endif
++
++#define RELEASE_HI      230
++#define MAX_EARPHONE    6
++#define RC_POLL_MS      10
++#define RC_FINISH_MS    500
++#define WAIT_STATE      3
++#define NOISE_THRESHOLD 100
++
++struct sharpsl_rc {
++	struct input_dev *input;
++	struct device *dev;
++
++	spinlock_t lock;
++	struct timer_list rctimer;
++	struct timer_list rctimer_finish;
++
++	unsigned int handling_press;
++	unsigned int noise;
++	unsigned int state;
++	unsigned int last_key;
++};
++
++static int get_remocon_raw(void)
++{
++	int i, val;
++
++	val = sharpsl_pm_pxa_read_max1111(MAX1111_REMCOM);
++	for (i = 0; i < ARRAY_SIZE(remote_keys); ++i) {
++		if (val >= remote_keys[i].min
++			&& val <= remote_keys[i].max) {
++			printk("get_remocon_raw: VAL=%i, KEY=%i\n", val, remote_keys[i].key);
++			return remote_keys[i].key;
++		}
++	}
++	return 0;
++}
++
++static irqreturn_t sharpsl_rc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++	struct sharpsl_rc *data = dev_id;
++	DPRINTK("sharpsl_rc_interrupt %d\n", irq);
++	if (!data->handling_press) {
++		DPRINTK("handling interrupt");
++		data->handling_press = 1;
++		data->noise = 0;
++		data->state = 0;
++		data->last_key = 0;
++
++		reset_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
++
++		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
++	}
++	return IRQ_HANDLED;
++}
++
++static void sharpsl_rc_timer_callback(unsigned long dataPtr)
++{
++	struct sharpsl_rc *data = (struct sharpsl_rc *) dataPtr;
++	int timer = 1;
++	int key = get_remocon_raw();
++	DPRINTK("timer callback, key: %d", key);
++
++	//wait for value to stabilize
++	if (data->state < WAIT_STATE) {
++		if (data->last_key != key) {
++			++data->noise;
++			if (data->noise > NOISE_THRESHOLD) {
++				DPRINTK("too much noise, bailing");
++				timer = 0;
++			}
++			data->state = 0;
++		} else {
++			++data->state;
++		}
++		data->last_key = key;
++
++	//stable value, send event
++	} else if (data->state == WAIT_STATE) {
++		data->noise = 0;
++		//non-key returned, skip the rest of the states and bail now
++		if (data->last_key == 0) {
++			DPRINTK("non-key detected %d, noise: %d", data->last_key, data->noise);
++			timer = 0;
++		//send button press
++		} else {
++			DPRINTK("key press detected %d, noise %d", data->last_key, data->noise);
++			input_report_key(data->input, data->last_key, 1);
++		}
++		++data->state;
++
++	//wait until key is released
++	} else if (data->state < WAIT_STATE * 2) {
++		if (key == data->last_key
++			&& data->noise < NOISE_THRESHOLD) {
++			data->state = WAIT_STATE + 1;
++			++data->noise;
++		} else {
++			++data->state;
++		}
++	//key is released, send event
++	} else {
++		//send button release
++		DPRINTK("release key %d", data->last_key);
++		input_report_key(data->input, data->last_key, 0);
++		timer = 0;
++	}
++	if (timer) {
++		mod_timer(&data->rctimer, jiffies + msecs_to_jiffies(RC_POLL_MS));
++	} else {
++		set_scoop_gpio(&REMOTE_SCOOP_DEVICE.dev, REMOTE_AKIN_PULLUP);
++		data->handling_press = 0;
++	}
++}
++
++static int __init sharpsl_rc_probe(struct platform_device *pdev)
++{
++	struct sharpsl_rc *sharpsl_rc;
++	struct input_dev *input_dev;
++	int i, ret;
++
++	dev_dbg(&pdev->dev, "sharpsl_rc_probe\n");
++
++	sharpsl_rc = kzalloc(sizeof(struct sharpsl_rc), GFP_KERNEL);
++	input_dev = input_allocate_device();
++	if (!sharpsl_rc || !input_dev) {
++		kfree(sharpsl_rc);
++		input_free_device(input_dev);
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(pdev, sharpsl_rc);
++
++	sharpsl_rc->dev = &pdev->dev;
++	sharpsl_rc->input = input_dev;
++	spin_lock_init(&sharpsl_rc->lock);
++
++	/* Init Remote Control Timer */
++	init_timer(&sharpsl_rc->rctimer);
++	sharpsl_rc->rctimer.function = sharpsl_rc_timer_callback;
++	sharpsl_rc->rctimer.data = (unsigned long) sharpsl_rc;
++
++	input_dev->name = "Sharp Remote Control CE-RHX";
++	input_dev->phys = "sharpsl_rc/input0";
++	input_dev->id.bustype = BUS_HOST;
++	input_dev->id.vendor = 0x0001;
++	input_dev->id.product = 0x0001;
++	input_dev->id.version = 0x0100;
++	input_dev->cdev.dev = &pdev->dev;
++	input_dev->private = sharpsl_rc;
++
++	input_dev->evbit[0] = BIT(EV_KEY);
++
++	for (i = 0; i <= ARRAY_SIZE(remote_keys); i++)
++	  set_bit(remote_keys[i].key, input_dev->keybit);
++
++	input_register_device(sharpsl_rc->input);
++
++	pxa_gpio_mode(REMOTE_GPIO_INT | GPIO_IN);
++	ret = request_irq(REMOTE_IRQ_INT,
++					  sharpsl_rc_interrupt,
++					  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
++					  "sharpsl_rc",
++					  sharpsl_rc);
++	if (ret < 0) {
++		dev_dbg(&pdev->dev, "Can't get IRQ: %d!\n", i);
++		kfree(sharpsl_rc);
++		input_free_device(input_dev);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int sharpsl_rc_remove(struct platform_device *pdev)
++{
++	struct sharpsl_rc *sharpsl_rc = platform_get_drvdata(pdev);
++
++	dev_dbg(&pdev->dev, "sharpsl_rc_remove\n");
++
++	free_irq(REMOTE_IRQ_INT, sharpsl_rc);
++	del_timer_sync(&sharpsl_rc->rctimer);
++	input_unregister_device(sharpsl_rc->input);
++	kfree(sharpsl_rc);
++
++	return 0;
++}
++
++static struct platform_driver sharpsl_rc_driver = {
++	.probe		= sharpsl_rc_probe,
++	.remove		= sharpsl_rc_remove,
++	.suspend	= NULL,
++	.resume		= NULL,
++	.driver		= {
++		.name	= "sharpsl-remote-control",
++	},
++};
++
++static int __devinit sharpsl_rc_init(void)
++{
++	printk("sharpsl_rc_init\n");
++	return platform_driver_register(&sharpsl_rc_driver);
++}
++
++static void __exit sharpsl_rc_exit(void)
++{
++	printk("sharpsl_rc_exit\n");
++	platform_driver_unregister(&sharpsl_rc_driver);
++}
++
++module_init(sharpsl_rc_init);
++module_exit(sharpsl_rc_exit);
++
++MODULE_AUTHOR("Justin Patrin <papercrane@reversefold.com>");
++MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
++MODULE_DESCRIPTION("SharpSL Remote Control Driver");
++MODULE_LICENSE("GPL");
+Index: linux-2.6.20/drivers/input/keyboard/spitzkbd.c
+===================================================================
+--- linux-2.6.20.orig/drivers/input/keyboard/spitzkbd.c
++++ linux-2.6.20/drivers/input/keyboard/spitzkbd.c
+@@ -19,6 +19,7 @@
+ #include <linux/jiffies.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
++#include <linux/kmod.h>
+ 
+ #include <asm/arch/spitz.h>
+ #include <asm/arch/hardware.h>
+@@ -279,13 +280,21 @@ static irqreturn_t spitzkbd_hinge_isr(in
+ static int sharpsl_hinge_state;
+ static int hinge_count;
+ 
++void spitzkbd_handle_sharpsl_rc(void *arg) {
++	request_module("sharpsl_rc");
++}
++
++DECLARE_WORK(spitzkbd_work, spitzkbd_handle_sharpsl_rc);
++
+ static void spitzkbd_hinge_timer(unsigned long data)
+ {
+ 	struct spitzkbd *spitzkbd_data = (struct spitzkbd *) data;
+ 	unsigned long state;
+ 	unsigned long flags;
++	unsigned int headphone, remote;
+ 
+ 	state = GPLR(SPITZ_GPIO_SWA) & (GPIO_bit(SPITZ_GPIO_SWA)|GPIO_bit(SPITZ_GPIO_SWB));
++	state |= (GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN));
+ 	state |= (GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT));
+ 	if (state != sharpsl_hinge_state) {
+ 		hinge_count = 0;
+@@ -299,9 +308,18 @@ static void spitzkbd_hinge_timer(unsigne
+ 
+ 		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+ 		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+-		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
++
++		headphone = ((GPLR(SPITZ_GPIO_HP_IN) & GPIO_bit(SPITZ_GPIO_HP_IN)) != 0);
++		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, headphone);
++
++		remote = headphone && ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) == 0);
++		input_report_switch(spitzkbd_data->input, SW_REMOTE_INSERT, remote);
+ 		input_sync(spitzkbd_data->input);
+ 
++		if (remote) {
++			schedule_work(&spitzkbd_work);
++		}
++
+ 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
+ 	} else {
+ 		mod_timer(&spitzkbd_data->htimer, jiffies + msecs_to_jiffies(HINGE_SCAN_INTERVAL));
+@@ -394,6 +412,7 @@ static int __init spitzkbd_probe(struct 
+ 	set_bit(SW_LID, input_dev->swbit);
+ 	set_bit(SW_TABLET_MODE, input_dev->swbit);
+ 	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
++	set_bit(SW_REMOTE_INSERT, input_dev->swbit);
+ 
+ 	err = input_register_device(input_dev);
+ 	if (err)
+@@ -431,9 +450,12 @@ static int __init spitzkbd_probe(struct 
+ 	request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
+ 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ 		    "Spitzkbd SWB", spitzkbd);
+-	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
++	request_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd_hinge_isr,
+ 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ 		    "Spitzkbd HP", spitzkbd);
++  	request_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd_hinge_isr,
++ 		    IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_SHARED,
++            "Spitzkbd HP Type", spitzkbd);
+ 
+ 	return 0;
+ 
+@@ -454,6 +476,7 @@ static int spitzkbd_remove(struct platfo
+ 	free_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd);
+ 	free_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd);
+ 	free_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd);
++	free_irq(SPITZ_IRQ_GPIO_HP_IN, spitzkbd);
+ 	free_irq(SPITZ_IRQ_GPIO_AK_INT, spitzkbd);
+ 
+ 	del_timer_sync(&spitzkbd->htimer);
+Index: linux-2.6.20/arch/arm/mach-pxa/sharpsl.h
+===================================================================
+--- linux-2.6.20.orig/arch/arm/mach-pxa/sharpsl.h
++++ linux-2.6.20/arch/arm/mach-pxa/sharpsl.h
+@@ -50,15 +50,10 @@ void spitz_wait_hsync(void);
+ 
+ #define READ_GPIO_BIT(x)    (GPLR(x) & GPIO_bit(x))
+ 
+-/* MAX1111 Channel Definitions */
+-#define MAX1111_BATT_VOLT   4u
+-#define MAX1111_BATT_TEMP   2u
+-#define MAX1111_ACIN_VOLT   6u
+-
+ extern struct battery_thresh spitz_battery_levels_acin[];
+ extern struct battery_thresh spitz_battery_levels_noac[];
+ void sharpsl_pm_pxa_init(void);
+ void sharpsl_pm_pxa_remove(void);
+-int sharpsl_pm_pxa_read_max1111(int channel);
++
+ 
+ 
+Index: linux-2.6.20/arch/arm/mach-pxa/sharpsl_pm.c
+===================================================================
+--- linux-2.6.20.orig/arch/arm/mach-pxa/sharpsl_pm.c
++++ linux-2.6.20/arch/arm/mach-pxa/sharpsl_pm.c
+@@ -135,6 +135,8 @@ int sharpsl_pm_pxa_read_max1111(int chan
+ 			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+ }
+ 
++EXPORT_SYMBOL(sharpsl_pm_pxa_read_max1111);
++
+ void sharpsl_pm_pxa_init(void)
+ {
+ 	pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
+Index: linux-2.6.20/include/asm-arm/hardware/sharpsl_pm.h
+===================================================================
+--- linux-2.6.20.orig/include/asm-arm/hardware/sharpsl_pm.h
++++ linux-2.6.20/include/asm-arm/hardware/sharpsl_pm.h
+@@ -104,3 +104,10 @@ irqreturn_t sharpsl_ac_isr(int irq, void
+ irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
+ irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
+ 
++/* MAX1111 Channel Definitions */
++#define MAX1111_REMCOM      0u
++#define MAX1111_BATT_VOLT   4u
++#define MAX1111_BATT_TEMP   2u
++#define MAX1111_ACIN_VOLT   6u
++
++int sharpsl_pm_pxa_read_max1111(int channel);
+Index: linux-2.6.20/include/linux/input.h
+===================================================================
+--- linux-2.6.20.orig/include/linux/input.h
++++ linux-2.6.20/include/linux/input.h
+@@ -602,6 +602,7 @@ struct input_absinfo {
+ #define SW_LID			0x00  /* set = lid shut */
+ #define SW_TABLET_MODE		0x01  /* set = tablet mode */
+ #define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
++#define SW_REMOTE_INSERT    0x04  /* set = remote */
+ #define SW_MAX			0x0f
+ 
+ /*
+Index: linux-2.6.20/arch/arm/mach-pxa/spitz_pm.c
+===================================================================
+--- linux-2.6.20.orig/arch/arm/mach-pxa/spitz_pm.c
++++ linux-2.6.20/arch/arm/mach-pxa/spitz_pm.c
+@@ -161,6 +161,13 @@ static int spitz_should_wakeup(unsigned 
+ 	if (resume_on_alarm && (PEDR & PWER_RTC))
+ 		is_resume |= PWER_RTC;
+ 
++	printk("wakeup: PEDR: %x, PKSR: %x, HP_IN: %x, AK_INT: %x\n", PEDR, PKSR, GPIO_bit(SPITZ_GPIO_HP_IN), GPIO_bit(SPITZ_GPIO_AK_INT));
++
++	//remote/headphone interrupt, wakeup
++	if (PEDR == 0 && (PKSR & 0xc0d01) != 0) {
++		is_resume |= PWER_RTC;
++	}
++
+ 	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+ 	return is_resume;
+ }
diff --git a/meta/packages/linux/linux-rp.inc b/meta/packages/linux/linux-rp.inc
index 10a4847455..aa40ee3041 100644
--- a/meta/packages/linux/linux-rp.inc
+++ b/meta/packages/linux/linux-rp.inc
@@ -17,10 +17,16 @@ EXTRA_OEMAKE = "OPENZAURUS_RELEASE=-${DISTRO_VERSION}"
 COMPATIBLE_HOST = "(arm|i.86).*-linux"
 COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal)'
 
+KERNEL_CUSTOM_NAME ?= ""
+KERNEL_DEPLOY_NAME ?= "${KERNEL_IMAGETYPE}-${PV}-${KERNEL_CUSTOM_NAME}${MACHINE}-${DATETIME}.bin"
+KERNEL_SYMLINK_NAME ?=  "${KERNEL_IMAGETYPE}-${KERNEL_CUSTOM_NAME}${MACHINE}.bin"
+KERNEL_DEFCONFIG ?= "defconfig-${MACHINE}"
+
 CMDLINE_CON = "console=ttyS0,115200n8 console=tty1 noinitrd"
+CMDLINE_CON_collie = "console=ttySA0,115200n8 console=tty1 noinitrd"
 CMDLINE_CON_qemuarm = "console=ttyAMA0,115200n8 console=tty1 noinitrd"
-CMDLINE_ROOT = "root=/dev/mtdblock2 rootfstype=jffs2"
-CMDLINE_ROOT_spitz = "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw"
+CMDLINE_ROOT ?= "root=/dev/mtdblock2 rootfstype=jffs2"
+CMDLINE_ROOT_spitz ?= "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw"
 #CMDLINE_ROOT_spitz = "root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 rw"
 CMDLINE_OTHER = "dyntick=enable"
 CMDLINE_DEBUG = '${@base_contains("IMAGE_FEATURES", "debug-tweaks", "debug", "quiet", d)}'
@@ -53,6 +59,8 @@ module_autoload_snd-soc-corgi_c7x0 = "snd-soc-corgi"
 module_autoload_snd-soc-spitz_akita = "snd-soc-spitz"
 module_autoload_snd-soc-spitz_spitz = "snd-soc-spitz"
 module_autoload_snd-soc-poodle_poodle = "snd-soc-poodle"
+module_autoload_locomo-spi_collie = "locomo-spi"
+module_autoload_mmc_block_collie = "mmc_block"
 
 do_configure() {
 	rm -f ${S}/.config
@@ -64,7 +72,7 @@ do_configure() {
 		fi
 	fi
 
-	if [ ! -e ${WORKDIR}/defconfig-${MACHINE} ]; then
+	if [ ! -e ${WORKDIR}/${KERNEL_DEFCONFIG} ]; then
 		die "No default configuration for ${MACHINE} available."
 	fi
 
@@ -105,7 +113,7 @@ do_configure() {
 		echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
 	fi
 
-	if [ "${DISTRO}" = "openzaurus" ]; then
+	if [ "${DISTRO}" = "openzaurus" -a "${MACHINE}" != "collie" ]; then
 		case ${MACHINE} in
 			c7x0 | akita | spitz )
 				echo "CONFIG_LOGO_OZ640_CLUT224=y"            >> ${S}/.config
@@ -126,7 +134,7 @@ do_configure() {
 		echo "CONFIG_LOGO=y"                          >> ${S}/.config
 		echo "# CONFIG_LOGO_LINUX_CLUT224 is not set" >> ${S}/.config
 		echo "# CONFIG_LOGO_OHAND_CLUT224 is not set" >> ${S}/.config
-	elif [ "${DISTRO}" = "poky" ]; then
+	elif [ "${DISTRO}" = "poky" -a "${MACHINE}" != "collie" ]; then
 		echo "CONFIG_LOGO=y"                          >> ${S}/.config
 		echo "CONFIG_LOGO_OHAND_CLUT224=y"            >> ${S}/.config
 		echo "# CONFIG_LOGO_OZ240_CLUT224 is not set" >> ${S}/.config
@@ -155,7 +163,7 @@ do_configure() {
 	    -e '/CONFIG_LOGO_OZ240_CLUT224=/d' \
 	    -e '/CONFIG_LOGO_OZ480_CLUT224=/d' \
 	    -e '/CONFIG_LOGO_OZ640_CLUT224=/d' \
-	    '${WORKDIR}/defconfig-${MACHINE}' >>'${S}/.config'
+	    '${WORKDIR}/${KERNEL_DEFCONFIG}' >>'${S}/.config'
 
 	yes '' | oe_runmake oldconfig
 }
@@ -186,11 +194,11 @@ do_compile_append() {
 
 do_deploy() {
 	install -d ${DEPLOY_DIR_IMAGE}
-	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin
-	rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin
+	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_DEPLOY_NAME}
 	cd ${DEPLOY_DIR_IMAGE}
-	ln -s ${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin ${KERNEL_IMAGETYPE}-${MACHINE}.bin
-	tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib	
+	rm -f ${KERNEL_SYMLINK_NAME}
+	ln -s ${KERNEL_DEPLOY_NAME} ${KERNEL_SYMLINK_NAME}
+	tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_VERSION}-${MACHINE}.tgz -C ${D} lib	
 }
 
 do_deploy[dirs] = "${S}"
diff --git a/meta/packages/linux/linux-rp_2.6.21.bb b/meta/packages/linux/linux-rp_2.6.21.bb
index 682ab308e5..3f155942e9 100644
--- a/meta/packages/linux/linux-rp_2.6.21.bb
+++ b/meta/packages/linux/linux-rp_2.6.21.bb
@@ -1,6 +1,6 @@
 require linux-rp.inc
 
-PR = "r7"
+PR = "r10"
 
 # Handy URLs
 # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046
@@ -49,8 +49,10 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \
            ${RPSRC}/pxa_cf_initorder_hack-r1.patch;patch=1;status=hack \
            file://pxa-serial-hack.patch;patch=1;status=hack \
            file://connectplus-remove-ide-HACK.patch;patch=1;status=hack \
+	   file://connectplus-prevent-oops-HACK.patch;patch=1;status=hack \
            file://squashfs3.0-2.6.15.patch;patch=1;status=external \
            file://vesafb-tng-1.0-rc2-2.6.20-rc2.patch;patch=1;status=external \
+           file://sharpsl-rc-r1.patch;patch=1 \
            file://defconfig-c7x0 \
            file://defconfig-hx2000 \
            file://defconfig-collie \
@@ -72,16 +74,20 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.21.tar.bz2 \
 # (Pavel Machek's git tree has updated versions of this?)
 #  ${JLSRC}/zaurus-lcd-2.6.11.diff.gz;patch=1
 
-# These patches are extracted from Pavel Machek's git tree
-# (diff against vanilla kernel)
 SRC_URI_append_collie = "\
-           ${DOSRC}/collie/mtd-sharp-flash-hack-r0.patch;patch=1 \
-           ${DOSRC}/collie/collie-r0.patch;patch=1 \
-           ${DOSRC}/collie/locomolcd-backlight-r0.patch;patch=1 \
-           ${DOSRC}/collie/ucb1x00-touch-audio-r0.patch;patch=1 \
-           file://collie-mcp-r1.patch;patch=1 \
-           ${DOSRC}/collie/sa1100-udc-r0.patch;patch=1 \
-#          ${DOSRC}/collie/collie-pm-r1.patch;patch=1 \
+ 	   ${TKSRC}/mtd-sharp-flash-hack-r2.patch;patch=1 \
+           ${TKSRC}/ucb1x00-touch-audio-r1.patch;patch=1 \
+ 	   ${TKSRC}/mcp-sa11x0-r0.patch;patch=1 \
+ 	   ${TKSRC}/sa1100-udc-r2.patch;patch=1 \
+ 	   ${TKSRC}/mmc_spi-r4.patch;patch=1 \
+ 	   ${TKSRC}/locomo-r0.patch;patch=1 \
+ 	   ${TKSRC}/collie-kexec.patch;patch=1 \
+ 	   ${TKSRC}/locomo_spi-r4.patch;patch=1 \
+ 	   ${TKSRC}/sharpsl_pm-r2.patch;patch=1 \
+ 	   ${TKSRC}/collie_pm-r2.patch;patch=1 \
+ 	   ${TKSRC}/locomokeyb_suspendkey-2.patch;patch=1 \
+ 	   ${TKSRC}/pcmcia_suspend.patch;patch=1 \
+ 	   ${TKSRC}/ucb1x00_suspend.patch;patch=1 \
 "
 
 SRC_URI_append_tosa = "\