dhcp: Move from meta-extras to meta

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3718 311d38ba-8fff-0310-9ca6-ca027cbcb966

9 files changed, 0 insertions, 379 deletions

diff --git a/meta-extras/packages/dhcp/files/default-relay b/meta-extras/packages/dhcp/files/default-relay
deleted file mode 100644
index 59249db283..0000000000
--- a/meta-extras/packages/dhcp/files/default-relay
+++ /dev/null
@@ -1,12 +0,0 @@
-# Defaults for dhcp-relay initscript
-# sourced by /etc/init.d/dhcp-relay
-
-# What servers should the DHCP relay forward requests to?
-# e.g: SERVERS="192.168.0.1"
-SERVERS=""
-
-# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests?
-INTERFACES=""
-
-# Additional options that are passed to the DHCP relay daemon?
-OPTIONS=""
\ No newline at end of file
diff --git a/meta-extras/packages/dhcp/files/default-server b/meta-extras/packages/dhcp/files/default-server
deleted file mode 100644
index 0385d16992..0000000000
--- a/meta-extras/packages/dhcp/files/default-server
+++ /dev/null
@@ -1,7 +0,0 @@
-# Defaults for dhcp initscript
-# sourced by /etc/init.d/dhcp-server
-# installed at /etc/default/dhcp-server by the maintainer scripts
-
-# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
-#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
-INTERFACES=""
diff --git a/meta-extras/packages/dhcp/files/dhclient.conf b/meta-extras/packages/dhcp/files/dhclient.conf
deleted file mode 100644
index 0e6dcf96c2..0000000000
--- a/meta-extras/packages/dhcp/files/dhclient.conf
+++ /dev/null
@@ -1,50 +0,0 @@
-# Configuration file for /sbin/dhclient, which is included in Debian's
-#	dhcp3-client package.
-#
-# This is a sample configuration file for dhclient. See dhclient.conf's
-#	man page for more information about the syntax of this file
-#	and a more comprehensive list of the parameters understood by
-#	dhclient.
-#
-# Normally, if the DHCP server provides reasonable information and does
-#	not leave anything out (like the domain name, for example), then
-#	few changes must be made to this file, if any.
-#
-
-#send host-name "andare.fugue.com";
-#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
-#send dhcp-lease-time 3600;
-#supersede domain-name "fugue.com home.vix.com";
-#prepend domain-name-servers 127.0.0.1;
-request subnet-mask, broadcast-address, time-offset, routers,
-	domain-name, domain-name-servers, host-name,
-	netbios-name-servers, netbios-scope;
-#require subnet-mask, domain-name-servers;
-#timeout 60;
-#retry 60;
-#reboot 10;
-#select-timeout 5;
-#initial-interval 2;
-#script "/etc/dhcp3/dhclient-script";
-#media "-link0 -link1 -link2", "link0 link1";
-#reject 192.33.137.209;
-
-#alias {
-#  interface "eth0";
-#  fixed-address 192.5.5.213;
-#  option subnet-mask 255.255.255.255;
-#}
-
-#lease {
-#  interface "eth0";
-#  fixed-address 192.33.137.200;
-#  medium "link0 link1";
-#  option host-name "andare.swiftmedia.com";
-#  option subnet-mask 255.255.255.0;
-#  option broadcast-address 192.33.137.255;
-#  option routers 192.33.137.250;
-#  option domain-name-servers 127.0.0.1;
-#  renew 2 2000/1/12 00:00:01;
-#  rebind 2 2000/1/12 00:00:01;
-#  expire 2 2000/1/12 00:00:01;
-#}
diff --git a/meta-extras/packages/dhcp/files/dhcp-3.0.3-dhclient-dbus.patch b/meta-extras/packages/dhcp/files/dhcp-3.0.3-dhclient-dbus.patch
deleted file mode 100644
index 579d72f484..0000000000
--- a/meta-extras/packages/dhcp/files/dhcp-3.0.3-dhclient-dbus.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- client/scripts/bsdos
-+++ client/scripts/bsdos
-@@ -47,6 +47,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
---- client/scripts/freebsd
-+++ client/scripts/freebsd
-@@ -57,6 +57,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
---- client/scripts/linux
-+++ client/scripts/linux
-@@ -69,6 +69,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
---- client/scripts/netbsd
-+++ client/scripts/netbsd
-@@ -47,6 +47,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
---- client/scripts/openbsd
-+++ client/scripts/openbsd
-@@ -47,6 +47,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
---- client/scripts/solaris
-+++ client/scripts/solaris
-@@ -47,6 +47,11 @@
-     . /etc/dhcp/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
diff --git a/meta-extras/packages/dhcp/files/dhcpd.conf b/meta-extras/packages/dhcp/files/dhcpd.conf
deleted file mode 100644
index 0001c0f00e..0000000000
--- a/meta-extras/packages/dhcp/files/dhcpd.conf
+++ /dev/null
@@ -1,108 +0,0 @@
-#
-# Sample configuration file for ISC dhcpd for Debian
-#
-# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
-#
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# option definitions common to all supported networks...
-option domain-name "example.org";
-option domain-name-servers ns1.example.org, ns2.example.org;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the 
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-#  range 10.254.239.10 10.254.239.20;
-#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-#  range dynamic-bootp 10.254.239.40 10.254.239.60;
-#  option broadcast-address 10.254.239.31;
-#  option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.fugue.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.fugue.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}
diff --git a/meta-extras/packages/dhcp/files/fixincludes.patch b/meta-extras/packages/dhcp/files/fixincludes.patch
deleted file mode 100644
index 91d99cce22..0000000000
--- a/meta-extras/packages/dhcp/files/fixincludes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- dhcp-3.0.2/common/tr.c~compile	2005-10-13 14:23:37.000000000 +0200
-+++ dhcp-3.0.2/common/tr.c	2005-10-13 14:23:45.000000000 +0200
-@@ -39,6 +39,7 @@
- #include "includes/netinet/udp.h"
- #include "includes/netinet/if_ether.h"
- #include "netinet/if_tr.h"
-+#include <asm/types.h>
- #include <sys/time.h>
- 
- /*
diff --git a/meta-extras/packages/dhcp/files/init-relay b/meta-extras/packages/dhcp/files/init-relay
deleted file mode 100644
index 019a7e84cf..0000000000
--- a/meta-extras/packages/dhcp/files/init-relay
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $
-#
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-relay ]; then
-	echo "/etc/default/dhcp-relay does not exist! - Aborting..."
-	echo "create this file to fix the problem."
-	exit 1
-fi
-
-# Read init script configuration (interfaces the daemon should listen on
-# and the DHCP server we should forward requests to.)
-. /etc/default/dhcp-relay
-
-# Build command line for interfaces (will be passed to dhrelay below.)
-IFCMD=""
-if test "$INTERFACES" != ""; then
-	for I in $INTERFACES; do
-		IFCMD=${IFCMD}"-i "${I}" "
-	done
-fi
-
-DHCRELAYPID=/var/run/dhcrelay.pid
-
-case "$1" in
-	start)
-		start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS
-		;;
-	stop)
-		start-stop-daemon -K -x /usr/sbin/dhcrelay
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0
diff --git a/meta-extras/packages/dhcp/files/init-server b/meta-extras/packages/dhcp/files/init-server
deleted file mode 100644
index 34c20852b9..0000000000
--- a/meta-extras/packages/dhcp/files/init-server
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $
-#
-
-test -f /usr/sbin/dhcpd || exit 0
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-server ]; then
-	echo "/etc/default/dhcp-server does not exist! - Aborting..."
-	exit 0
-fi
-
-# Read init script configuration (so far only interfaces the daemon
-# should listen on.)
-. /etc/default/dhcp-server
-
-case "$1" in
-	start)
-		echo -n "Starting DHCP server: "
-		test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/
-		test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases	
-		start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES
-		echo "."
-		;;
-	stop)
-		echo -n "Stopping DHCP server: dhcpd3"
-		start-stop-daemon -K -x /usr/sbin/dhcpd
-		echo "."
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		if [ "$?" != "0" ]; then
-			exit 1
-		fi
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0
diff --git a/meta-extras/packages/dhcp/files/noattrmode.patch b/meta-extras/packages/dhcp/files/noattrmode.patch
deleted file mode 100644
index 5c766d6c06..0000000000
--- a/meta-extras/packages/dhcp/files/noattrmode.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#
-# Patch managed by http://www.holgerschurig.de/patcher.html
-#
-
---- dhcp-3.0.1/includes/dhcpd.h~compile
-+++ dhcp-3.0.1/includes/dhcpd.h
-@@ -306,9 +306,9 @@
- #	define EPHEMERAL_FLAGS		(MS_NULL_TERMINATION | \
- 					 UNICAST_BROADCAST_HACK)
- 
--	binding_state_t __attribute__ ((mode (__byte__))) binding_state;
--	binding_state_t __attribute__ ((mode (__byte__))) next_binding_state;
--	binding_state_t __attribute__ ((mode (__byte__))) desired_binding_state;
-+	binding_state_t binding_state;
-+	binding_state_t next_binding_state;
-+	binding_state_t desired_binding_state;
- 	
- 	struct lease_state *state;
-