Enable build dir outside of the poky directory

You need to first set up the build directory by sourcing the poky build script,
after that builds can be run in that directory so long as bitbake is in $PATH
removing the need to source the init script for each build.

i.e:
$ . poky-init-build-env ~/my-build
$ bitbake some-image
<<later, in a different shell>>
$ cd ~/my-build
$ export PATH=/path/to/bitbake/bin:$PATH
$ bitbake an-image

This patch also removes use of OEROOT in recipes, etc.

Signed-off-by: Joshua Lock <josh@linux.intel.com>

14 files changed, 106 insertions, 85 deletions

diff --git a/build/conf/bblayers.conf.sample b/build/conf/bblayers.conf.sample
index dff44e49c4..04b7768ffa 100644
--- a/build/conf/bblayers.conf.sample
+++ b/build/conf/bblayers.conf.sample
@@ -4,6 +4,6 @@ LCONF_VERSION = "1"
 
 BBFILES ?= ""
 BBLAYERS = " \
-  ${OEROOT}/meta \
-  ${OEROOT}/meta-moblin \
+  ##POKYBASE##/meta \
+  ##POKYBASE##/meta-moblin \
   "
diff --git a/build/conf/local.conf.sample b/build/conf/local.conf.sample
index 32bd409ecc..78c3bd144e 100644
--- a/build/conf/local.conf.sample
+++ b/build/conf/local.conf.sample
@@ -42,24 +42,6 @@ DISTRO ?= "poky"
 # For bleeding edge / experimental / unstable package versions
 # DISTRO ?= "poky-bleeding"
 
-# Poky has various extra metadata collections (openmoko, extras).
-# To enable these, uncomment all (or some of) the following lines:
-# BBFILES = "\
-#    ${OEROOT}/meta/packages/*/*.bb \
-#    ${OEROOT}/meta-extras/packages/*/*.bb \
-#    ${OEROOT}/meta-openmoko/packages/*/*.bb \
-#    ${OEROOT}/meta-moblin/packages/*/*.bb \
-#    "
-# BBFILE_COLLECTIONS = "normal extras openmoko moblin"
-# BBFILE_PATTERN_normal = "^${OEROOT}/meta/"
-# BBFILE_PATTERN_extras = "^${OEROOT}/meta-extras/"
-# BBFILE_PATTERN_openmoko = "^${OEROOT}/meta-openmoko/"
-# BBFILE_PATTERN_moblin = "^${OEROOT}/meta-moblin/"
-# BBFILE_PRIORITY_normal = "5"
-# BBFILE_PRIORITY_extras = "5"
-# BBFILE_PRIORITY_openmoko = "5"
-# BBFILE_PRIORITY_moblin = "5"
-
 BBMASK = ""
 
 # EXTRA_IMAGE_FEATURES allows extra packages to be added to the generated images 
@@ -109,7 +91,7 @@ PACKAGE_CLASSES ?= "package_ipk"
 # Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
 # disk space, so make sure to free enough space. The default TMPDIR is
 # <build directory>/tmp
-TMPDIR = "${OEROOT}/build/tmp"
+#TMPDIR = "${POKYBASE}/build/tmp"
 
 
 # Uncomment this if you are using the Openedhand provided qemu deb - see README
diff --git a/build/conf/site.conf.sample b/build/conf/site.conf.sample
index 060dca087c..42042042f7 100644
--- a/build/conf/site.conf.sample
+++ b/build/conf/site.conf.sample
@@ -20,7 +20,7 @@ SCONF_VERSION = "1"
 # although this only works for http
 #GIT_PROXY_HOST = "proxy.example.com"
 #GIT_PROXY_PORT = "81"
-#export GIT_PROXY_COMMAND = "${OEROOT}/scripts/poky-git-proxy-command"
+#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-command"
 
 # GIT_PROXY_IGNORE_* lines define hosts which do not require a proxy to access
 #GIT_CORE_CONFIG = "Yes"
@@ -32,7 +32,7 @@ SCONF_VERSION = "1"
 # and then share that binary somewhere in PATH, then use the following settings
 #GIT_PROXY_HOST = "proxy.example.com"
 #GIT_PROXY_PORT = "81"
-#export GIT_PROXY_COMMAND = "${OEROOT}/scripts/poky-git-proxy-socks-command"
+#export GIT_PROXY_COMMAND = "${POKYBASE}/scripts/poky-git-proxy-socks-command"
 
 
 # Uncomment this to use a shared download directory
diff --git a/handbook/extendpoky.xml b/handbook/extendpoky.xml
index d03284d0e3..18edb1ac95 100644
--- a/handbook/extendpoky.xml
+++ b/handbook/extendpoky.xml
@@ -535,7 +535,7 @@ bitbake poky-image-sato
                 supported and non-invasive fashion.
            </para>
 
-          <para>
+           <para>
                The Poky tree includes two additional layers which demonstrate
                this functionality, meta-moblin and meta-extras.
                The meta-extras repostory is not enabled by default but enabling
@@ -547,12 +547,12 @@ bitbake poky-image-sato
 
 BBFILES ?= ""
 BBLAYERS = " \
-  ${OEROOT}/meta \
-  ${OEROOT}/meta-moblin \
-  ${OEROOT}/meta-extras \
+  /path/to/poky/meta \
+  /path/to/poky/meta-moblin \
+  /path/to/poky/meta-extras \
   "
 </literallayout>
-          </para>
+           </para>
 
           <para>
                Bitbake parses the conf/layer.conf of each of the layers in BBLAYERS
@@ -609,7 +609,7 @@ require conf/distro/include/poky-extras-src-revisions.inc
                 git repository of the format meta-prvt-XXXX and have this repository
                 cloned alongside the other meta directories in the Poky tree.
                 This way you can keep your Poky tree and it's configuration entirely
-                inside OEROOT.
+                inside POKYBASE.
             </para>
         </section>
 
diff --git a/meta/classes/imagetest-qemu.bbclass b/meta/classes/imagetest-qemu.bbclass
index 742b759208..feab868476 100644
--- a/meta/classes/imagetest-qemu.bbclass
+++ b/meta/classes/imagetest-qemu.bbclass
@@ -47,6 +47,7 @@ python do_qemuimagetest() {
         os.environ["QEMUARCH"] = machine
         os.environ["QEMUTARGET"] = pname
         os.environ["DISPLAY"] = bb.data.getVar("DISPLAY", d, True)
+        os.environ["POKYBASE"] = bb.data.getVar("POKYBASE", d, True)
 
         """run Test Case"""
         bb.note("Run %s test in scenario %s" % (case, scen))
diff --git a/meta/classes/sanity.bbclass b/meta/classes/sanity.bbclass
index 94e96f8524..31b8dd2b07 100644
--- a/meta/classes/sanity.bbclass
+++ b/meta/classes/sanity.bbclass
@@ -194,11 +194,11 @@ def check_sanity(e):
 		f.write(current_abi)
 	f.close()
 
-	oeroot = data.getVar('OEROOT', e.data)
+	oeroot = data.getVar('POKYBASE', e.data)
 	if oeroot.find ('+') != -1:
-		messages = messages + "Error, you have an invalid character (+) in your OEROOT directory path. Please more Poky to a directory which doesn't include a +."
+		messages = messages + "Error, you have an invalid character (+) in your POKYBASE directory path. Please more Poky to a directory which doesn't include a +."
 	elif oeroot.find (' ') != -1:
-		messages = messages + "Error, you have a space in your OEROOT directory path. Please move Poky to a directory which doesn't include a space."
+		messages = messages + "Error, you have a space in your POKYBASE directory path. Please move Poky to a directory which doesn't include a space."
 
 	if messages != "":
 		raise_sanity_error(messages)
diff --git a/meta/conf/layer.conf b/meta/conf/layer.conf
index d0d74884ec..30068d6aec 100644
--- a/meta/conf/layer.conf
+++ b/meta/conf/layer.conf
@@ -12,9 +12,12 @@ BBFILE_PRIORITY_normal = "5"
 # Add scripts to PATH
 PATH := "${PATH}:${LAYERDIR}/scripts"
 
+# Set a variable to get to the top of the metadata location
+POKYBASE := ${@os.path.normpath("${LAYERDIR}/../")}
+
 # Set path to qemu image tests included in this layer
 
-QEMUIMAGETESTS := "${OEROOT}/scripts/qemuimage-tests"
+QEMUIMAGETESTS := "${POKYBASE}/scripts/qemuimage-tests"
 
 require conf/distro/include/poky-default-revisions.inc
 
diff --git a/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb b/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb
index 5d8e45f123..a4294ef5cf 100644
--- a/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb
+++ b/meta/packages/qemu/qemu-helper-nativesdk_1.0.bb
@@ -5,11 +5,11 @@ PR = "r7"
 
 FILESPATH = "${FILE_DIRNAME}/qemu-helper"
 
-SRC_URI = "file://${OEROOT}/scripts/poky-qemu \
-           file://${OEROOT}/scripts/poky-qemu-internal \
-           file://${OEROOT}/scripts/poky-addptable2image \
-           file://${OEROOT}/scripts/poky-qemu-ifup \
-           file://${OEROOT}/scripts/poky-qemu-ifdown \
+SRC_URI = "file://${POKYBASE}/scripts/poky-qemu \
+           file://${POKYBASE}/scripts/poky-qemu-internal \
+           file://${POKYBASE}/scripts/poky-addptable2image \
+           file://${POKYBASE}/scripts/poky-qemu-ifup \
+           file://${POKYBASE}/scripts/poky-qemu-ifdown \
 	   file://raw2flash.c"
 
 S = "${WORKDIR}"
@@ -23,7 +23,7 @@ do_compile() {
 
 do_install() {
 	install -d ${D}${bindir}
-	install -m 0755 ${WORKDIR}${OEROOT}/scripts/poky-* ${D}${bindir}/
+	install -m 0755 ${WORKDIR}${POKYBASE}/scripts/poky-* ${D}${bindir}/
 	install raw2flash.spitz ${D}${bindir}/
 	install flash2raw.spitz ${D}${bindir}/
 	ln -fs raw2flash.spitz ${D}${bindir}/raw2flash.akita
diff --git a/poky-init-build-env b/poky-init-build-env
index 94bf3f0f7f..0f5e684a52 100755
--- a/poky-init-build-env
+++ b/poky-init-build-env
@@ -21,7 +21,9 @@
 
 if test x"$0" = x"./poky-init-build-env"; then
    echo "Error: Run via '. ./poky-init-build-env'"
+elif test x"$BASH_SOURCE" = x; then
+   echo "Error: you are not running a Bash shell, please use Bash or add support for your shell to the init scripts"
 else
-   . ./scripts/poky-env-internal
+   . `dirname $BASH_SOURCE`/scripts/poky-env-internal
 fi
 
diff --git a/scripts/poky-env-internal b/scripts/poky-env-internal
index 54b6ee8964..862ce7aec2 100755
--- a/scripts/poky-env-internal
+++ b/scripts/poky-env-internal
@@ -19,19 +19,30 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 
-# Change this to the location of this file.
-# Also update the locations at the top of conf/local.conf
+# scripts/ is a sub-directory of OEROOT, we use readlink to get the full path
+SCRIPTPATH=`readlink -f "$BASH_SOURCE"`
+OEROOT="`dirname $SCRIPTPATH`/../"
 
-OEROOT=`pwd`
 if [ "x$BDIR" = "x" ]; then
-	if [ "x$1" = "x" ]; then
-		BDIR="build"
-	else
-		BDIR="$1"
-	fi
+	  if [ "x$1" = "x" ]; then
+        BDIR="build"
+	  else
+		    BDIR=`readlink -f "$1"`
+	  fi
+fi
+if [[ "$BDIR" = /* ]] ; then
+    BUILDDIR="$BDIR"
+else
+    BUILDDIR="`pwd`/$BDIR"
 fi
-BUILDDIR="$OEROOT/$BDIR/"
 unset BDIR
+
+mkdir -p $BUILDDIR/conf
+if ! (test -w "$BUILDDIR"); then
+    echo >&2 "Error: Cannot write to $BUILDDIR, perhaps try sourcing with a writable path? i.e. . poky-init-build-env ~/my-build"
+    return
+fi
+
 BITBAKEDIR="$OEROOT/bitbake$BBEXTRA/"
 PKGDIR="$OEROOT/meta/"
 BBPATH="$BITBAKEDIR $PKGDIR"
@@ -51,9 +62,8 @@ do
         continue
     fi
     if [ -e $OEROOT/$repo/poky-extra-environment ]; then
-	. $OEROOT/$repo/poky-extra-environment
+	      . $OEROOT/$repo/poky-extra-environment
     fi
-    BBPATH=" $BBPATH $OEROOT/$repo"
 done
 
 BBPATH="$BBPATH $HOME/.oe $HOME/.poky $BUILDDIR"
@@ -78,12 +88,13 @@ BUILD_SYS="$BUILD_ARCH-$BUILD_OS"
 
 PATH="$BITBAKEDIR/bin/:$OEROOT/scripts:$PATH"
 
-cd "$BUILDDIR"
-
 # Remove any symlinks from paths
 BITBAKEDIR=`readlink -f "$BITBAKEDIR"`
 PKGDIR=`readlink -f "$PKGDIR"`
 BUILDDIR=`readlink -f "$BUILDDIR"`
+OEROOT=`readlink -f "$OEROOT"`
+
+cd "$BUILDDIR"
 
 if ! (test -d "$BITBAKEDIR" && test -d "$PKGDIR" && test -d "$BUILDDIR"); then
     echo >&2 "Error: Not all directories exist! Did you run this script in poky directory?"
@@ -91,7 +102,7 @@ if ! (test -d "$BITBAKEDIR" && test -d "$PKGDIR" && test -d "$BUILDDIR"); then
 fi
 
 if [ "x" = "x$POKYLOCALCONF" ]; then
-    POKYLOCALCONF="$BUILDDIR/conf/local.conf.sample"
+    POKYLOCALCONF="$OEROOT/build/conf/local.conf.sample"
 fi
 if ! (test -r "$BUILDDIR/conf/local.conf"); then
     echo "You had no conf/local.conf file. Poky has created this configuration file for you"
@@ -105,17 +116,19 @@ if ! (test -r "$BUILDDIR/conf/local.conf"); then
 fi
 
 if [ "x" = "x$POKYLAYERCONF" ]; then
-    POKYLAYERCONF="$BUILDDIR/conf/bblayers.conf.sample"
+    POKYLAYERCONF="$OEROOT/build/conf/bblayers.conf.sample"
 fi
 if ! (test -r "$BUILDDIR/conf/bblayers.conf"); then
-    cp -f $POKYLAYERCONF $BUILDDIR/conf/bblayers.conf
+    # Put the abosolute path to the layers in bblayers.conf so we can run
+    # bitbake without the init script after the first run
+    sed "s|##POKYBASE##|$OEROOT|g" $POKYLAYERCONF > $BUILDDIR/conf/bblayers.conf
 fi
 
 # Prevent disturbing a new GIT clone in same console
 unset POKYLOCALCONF
 unset POKYLAYERCONF
 
-export BBPATH OEROOT BUILD_SYS BUILDDIR
+export BBPATH BUILD_SYS BUILDDIR
 
 # Kill off the TERMINFO variable, as glibc will grab its contents in its 'make
 # install' if set
@@ -141,4 +154,4 @@ echo "Common targets are poky-image-minimal, poky-image-sato, meta-toolchain or
 echo
 echo "You can also run generated qemu images with a command like 'runqemu qemux86'"
 
-export BB_ENV_EXTRAWHITE="MACHINE DISTRO POKYMODE POKYLIBC OEROOT http_proxy ftp_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS"
+export BB_ENV_EXTRAWHITE="MACHINE DISTRO POKYMODE POKYLIBC http_proxy ftp_proxy SSH_AGENT_PID SSH_AUTH_SOCK BB_SRCREV_POLICY SDKMACHINE BB_NUMBER_THREADS"
diff --git a/scripts/pstage-scanner b/scripts/pstage-scanner
index 9234912581..4a27aa5d26 100755
--- a/scripts/pstage-scanner
+++ b/scripts/pstage-scanner
@@ -1,7 +1,7 @@
 #!/usr/bin/env python
 
 ##
-## This script will scan all of the packages in ${OEROOT}/pstage (or argv[1])
+## This script will scan all of the packages in PSTAGE_DIR (or argv[1])
 ## in search of packages which install files outside of their native sysroot
 ##
 
@@ -16,15 +16,24 @@ def main():
     """Generate a list of pstage packages and scan them for badness"""
     package_list = []
 
-    ## First we walk the pstage directory, let's assume we're running from
-    ## a sibling of pstage (i.e. scripts) if no path defined
     try:
         path = sysv.arg[1]
     except:
-        path = os.path.join(os.environ.get("OEROOT"), "pstage")
+        # Assume pstage is a child of tmp, Poky's default
+        tmpdir = None
+        sub.Popen(["bitbake", "-e"], stdout=sub.PIPE,stderr=sub.PIPE)
+        err, out = p.communicate()
+        if (!out):
+            print("bitbake not in your environment, try pstage-scanner /some/path/to/pstage")
+            exit
+        for line in out:
+            if line.find("PSTAGE_DIR=") != -1:
+                tmpdir = line.partition("=")[2].strip("\"")
+                break
 
     if len(path) < 1 or not os.path.exists(path):
-        path = os.path.join(os.environ.get("OEROOT"), "pstage")
+        print ("No path defined and bitbake not in your environment, try pstage-scanner /some/path/to/pstage")
+        exit
     
     global logf
     try:
diff --git a/scripts/qemuimage-tests/sanity/boot b/scripts/qemuimage-tests/sanity/boot
index b4c0094f25..57b204b170 100755
--- a/scripts/qemuimage-tests/sanity/boot
+++ b/scripts/qemuimage-tests/sanity/boot
@@ -9,8 +9,7 @@
 # This file is licensed under the GNU General Public License,
 # Version 2.
 #
-
-. $OEROOT/scripts/qemuimage-testlib
+. $POKYBASE/scripts/qemuimage-testlib
 
 TIMEOUT=120
 QEMU_IPADDR="192.168.7.2"
diff --git a/scripts/qemuimage-tests/sanity/ssh b/scripts/qemuimage-tests/sanity/ssh
index 7dd895951c..3c7638cc2e 100755
--- a/scripts/qemuimage-tests/sanity/ssh
+++ b/scripts/qemuimage-tests/sanity/ssh
@@ -9,7 +9,7 @@
 # Version 2.
 #
 
-. $OEROOT/scripts/qemuimage-testlib
+. $POKYBASE/scripts/qemuimage-testlib
 
 TIMEOUT=360
 QEMU_IPADDR="192.168.7.2"
diff --git a/scripts/runqemu b/scripts/runqemu
index c7c51ec77a..bb26f8b633 100755
--- a/scripts/runqemu
+++ b/scripts/runqemu
@@ -19,11 +19,23 @@
 
 
 if [ "x$BUILDDIR" = "x" ]; then
-    echo "You need to source poky-init-build-env before running this script"
-    exit 1
+    # BUILDDIR unset, try and get TMPDIR from bitbake
+    type -P bitbake &>/dev/null || {
+        echo "You either need bitbake in your PATH or to source poky-init-build-env before running this script" >&2; exit 1; }
+
+    # we have bitbake in PATH, get TMPDIR from the environment
+    TMPDIR=`bitbake -e | grep TMPDIR=\" | cut -d '=' -f2 | cut -d '"' -f2`
+else
+    TMPDIR=$BUILDDIR/tmp
+fi
+
+if ! (test -d "$TMPDIR"); then
+    echo >&2 "Error: no $TMPDIR directory, please re-run the script from the Poky build directory."
+    return
 fi
 
-INTERNAL_SCRIPT=`which poky-qemu-internal`
+SCRIPTSDIR=`dirname "$0"`
+INTERNAL_SCRIPT=SCRIPTSDIR/poky-qemu-internal`
 
 if [ "x$1" = "x" ]; then
     echo
@@ -67,9 +79,9 @@ fi
 
 if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "spitz" -o "$MACHINE" = "borzoi" -o "$MACHINE" = "akita" -o "$MACHINE" = "nokia800" ]; then
     if [ "x$ZIMAGE" = "x" ]; then
-        ZIMAGE=$BUILDDIR/tmp/deploy/images/zImage-$MACHINE.bin
+        ZIMAGE=$TMPDIR/deploy/images/zImage-$MACHINE.bin
     fi
-    CROSSPATH=$BUILDDIR/sysroots/$BUILD_SYS/arm-poky-linux-gnueabi/bin
+    CROSSPATH=$TMPDIR/sysroots/$BUILD_SYS/arm-poky-linux-gnueabi/bin
 fi
 
 function findimage {
@@ -96,7 +108,7 @@ function findimage {
 if [ "$MACHINE" = "qemuarm" ]; then
     if [ "$TYPE" = "ext3" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-            T=$BUILDDIR/tmp/deploy/images
+            T=$TMPDIR/deploy/images
             findimage $T qemuarm ext3 "poky-image-sdk poky-image-sato poky-image-minimal"
         fi
     fi
@@ -104,34 +116,34 @@ fi
 
 if [ "$MACHINE" = "qemumips" ]; then
     if [ "x$ZIMAGE" = "x" ]; then
-        ZIMAGE=$BUILDDIR/tmp/deploy/images/vmlinux-$MACHINE.bin
+        ZIMAGE=$TMPDIR/tmp/deploy/images/vmlinux-$MACHINE.bin
     fi
     if [ "$TYPE" = "ext3" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-            T=$BUILDDIR/tmp/deploy/images
+            T=$TMPDIR/tmp/deploy/images
             findimage $T $MACHINE ext3 "poky-image-sdk poky-image-sato poky-image-minimal"
         fi
     fi
-    CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr
+    CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr
 fi
 
 if [ "$MACHINE" = "qemuppc" ]; then
     if [ "x$ZIMAGE" = "x" ]; then
-        ZIMAGE=$BUILDDIR/tmp/deploy/images/zImage-$MACHINE.bin
+        ZIMAGE=$TMPDIR/tmp/deploy/images/zImage-$MACHINE.bin
     fi
     if [ "$TYPE" = "ext3" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-            T=$BUILDDIR/tmp/deploy/images
+            T=$TMPDIR/tmp/deploy/images
             findimage $T $MACHINE ext3 "poky-image-sdk poky-image-sato poky-image-minimal"
         fi
     fi
-    CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr
+    CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr
 fi
 
 if [ "$MACHINE" = "spitz" ]; then
     if [ "$TYPE" = "ext3" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-           HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-spitz.ext3
+           HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-spitz.ext3
         fi
     fi
 fi
@@ -139,7 +151,7 @@ fi
 if [ "$MACHINE" = "akita" ]; then
     if [ "$TYPE" = "jffs2" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-           HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-akita.jffs2
+           HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-akita.jffs2
         fi
     fi
 fi
@@ -147,7 +159,7 @@ fi
 if [ "$MACHINE" = "nokia800" ]; then
     if [ "$TYPE" = "jffs2" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-           HDIMAGE=$BUILDDIR/tmp/deploy/images/poky-image-sato-nokia800.jffs2
+           HDIMAGE=$TMPDIR/tmp/deploy/images/poky-image-sato-nokia800.jffs2
         fi
     fi
 fi
@@ -155,15 +167,15 @@ fi
 
 if [ "$MACHINE" = "qemux86" ]; then
     if [ "x$ZIMAGE" = "x" ]; then
-        ZIMAGE=$BUILDDIR/tmp/deploy/images/bzImage-$MACHINE.bin
+        ZIMAGE=$TMPDIR/tmp/deploy/images/bzImage-$MACHINE.bin
     fi
     if [ "$TYPE" = "ext3" ]; then
         if [ "x$HDIMAGE" = "x" ]; then
-            T=$BUILDDIR/tmp/deploy/images
+            T=$TMPDIR/tmp/deploy/images
             findimage $T qemux86 ext3 "moblin-image-sdk moblin-image-netbook poky-image-sdk poky-image-sato poky-image-minimal"
         fi
     fi
-    CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr
+    CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr
 fi
 
 if [ "$MACHINE" = "qemuarm" -o "$MACHINE" = "spitz" -o "$MACHINE" = "borzoi" -o "$MACHINE" = "akita" -o "$MACHINE" = "nokia800" ]; then
@@ -182,6 +194,6 @@ if [ ! -e $CROSSPATH/$TARGET_SYS/bin/gcc ]; then
    ln -s $CROSSPATH/bin/$TARGET_SYS-gcc $CROSSPATH/$TARGET_SYS/bin/gcc
 fi
 
-CROSSPATH=$BUILDDIR/tmp/sysroots/$BUILD_SYS/usr/bin:$CROSSPATH:$BUILDDIR/tmp/cross/bin
+CROSSPATH=$TMPDIR/tmp/sysroots/$BUILD_SYS/usr/bin:$CROSSPATH:$TMPDIR/tmp/cross/bin
 
 . $INTERNAL_SCRIPT