1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
|
#!/bin/sh
# This script runs very early in order to ensure that the USB network comes
# up at first system boot. It gathers or creates the necessary host and device
# mac addresses for the g_ether module at first boot, and writes them to the
# /etc/modprobe.conf/g_ether.conf file.
#
# Due to some oddness with udev, it also modprobes g_ether, only on first boot.
# If the g_ether module options file exists, nothing to do.
if [ ! -e /etc/modprobe.d/g_ether.conf ] ; then
# Gather up all g_ether parameters passed in on the kernel command line, and
# make sure to pass them to the module; this will ensure similar behavior
# between the module and built-in.
# Begin by searching the command line for the host and dev addrs
da=`sed -n -e 's|.*g_ether\.dev_addr\=\(..:..:..:..:..:..\).*|\1|p' /proc/cmdline`
ha=`sed -n -e 's|.*g_ether\.host_addr\=\(..:..:..:..:..:..\).*|\1|p' /proc/cmdline`
# If the device address is missing, try to find it some other way
if [ -z "$da" ] ; then
if grep -q '^Hardware.*GTA02$' /proc/cpuinfo ; then
# Use the "identity" or "factory" partition on the GTA02.
# Ok, this is ugly. We run before udev, so we need to rummage about in
# /sys to see if we have an identity partition, and create the device
# node if it doesn't already exist.
if [ ! -e /dev/mtd5ro -a -e /sys/class/mtd/mtd5ro/dev ] ; then
majmin=`sed -e 's|:| |' /sys/class/mtd/mtd5ro/dev`
mknod /dev/mtd5ro c $majmin
fi
# We should have the device node now.
if [ -e /dev/mtd5ro ] ; then
# The partition is an ext2 filesystem; we probably should mount the
# thing using a loopback mount and then read the correct file from it,
# but we're running way early in the boot; not only will that be slow,
# there's a good chance it may not even work (udev hasn't run yet).
da=`strings /dev/mtd5ro | grep ^U: | sed -n -e 's|U:\(..:..:..:..:..:..\).*|\1|p'`
fi
fi
# TODO: add code to compute a static random address for the GTA01.
# For now, GTA01 owners should probably set the addresses in their
# u-boot environment and pass in on the command line. A reasonable
# solution would be to the random prefix range with the last part of
# the mac copied from the bluetooth device.
fi
# If have a device address, now we need to sort out the host address. If it
# is unspecified, or if it is the same as the device address (Qi does this),
# compute a new address by just incrementing the device address.
if [ -n "$da" ] ; then
if [ -z "$ha" -o "$da" = "$ha" ] ; then
# We need to compute a new address - split the device address into two
# part, and increment the second part.
pfx=`echo "$da" | sed -n -e 's|\(..:..:..:\)..:..:..|\1|p'`
i=`echo "$da" | sed -n -e 's|..:..:..:\(..\):\(..\):\(..\)|0x\1\2\3|p'`
# Now increment the mac addr
i=$(printf %06x $(($i+1)))
# And glue the parts back together again.
i=`echo "$i" | sed -n -e 's|\(..\)\(..\)\(..\)|\1:\2:\3|p'`
# Assign the computed host address, if this all worked out.
[ -n "$i" -a -n "$pfx" ] && ha=$pfx$i
fi
fi
# Compute the command-line options themselves
[ -n "$da" ] && daddr="dev_addr=$da"
[ -n "$ha" ] && haddr="host_addr=$ha"
# Write the module options file out even if we have no addresses to write,
# so that we do not need to run again at next boot.
[ -d /etc/modprobe.d ] || mkdir /etc/modprobe.d
echo "options g_ether $daddr $haddr" >/etc/modprobe.d/g_ether.conf
# And now, since this is first boot, we need to probe the module
modprobe g_ether 2>/dev/null || true
fi
|
