path: root/recipes/linux/linux-rp-2.6.24/tosa/0022-Provide-new-implementation-infrastructure-that-platf.patch

From 3a0251c01446f3a6763e4406ca5495102db63aa4 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 18 Jan 2008 00:35:20 +0300
Subject: [PATCH 22/64] Provide new implementation infrastructure that platforms may choose to use
 when implementing the GPIO programming interface.  Platforms can update their
 GPIO support to use this.  In many cases the incremental cost to access a
 non-inlined GPIO should be less than a dozen instructions, with the memory
 cost being about a page (total) of extra data and code.  The upside is:

  * Providing two features which were "want to have (but OK to defer)" when
    GPIO interfaces were first discussed in November 2006:

    -	A "struct gpio_chip" to plug in GPIOs that aren't directly supported
	by SOC platforms, but come from FPGAs or other multifunction devices
	using conventional device registers (like UCB-1x00 or SM501 GPIOs,
	and southbridges in PCs with more open specs than usual).

    -	Full support for message-based GPIO expanders, where registers are
	accessed through sleeping I/O calls.  Previous support for these
	"cansleep" calls was just stubs.  (One example: the widely used
	pcf8574 I2C chips, with 8 GPIOs each.)

  * Including a non-stub implementation of the gpio_{request,free}() calls,
    making those calls much more useful.  The diagnostic labels are also
    recorded given DEBUG_FS, so /sys/kernel/debug/gpio can show a snapshot
    of all GPIOs known to this infrastructure.

The driver programming interfaces introduced in 2.6.21 do not change at all;
this infrastructure is entirely below those covers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/gpio/Makefile      |    2 +
 drivers/gpio/gpiolib.c     |  567 ++++++++++++++++++++++++++++++++++++++++++++
 include/asm-generic/gpio.h |   98 ++++++++
 3 files changed, 667 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpio/gpiolib.c

diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index cdbba6b..2db28ce 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,3 +1,5 @@
 # gpio support: dedicated expander chips, etc
 
 ccflags-$(CONFIG_DEBUG_GPIO)	+= -DDEBUG
+
+obj-$(CONFIG_HAVE_GPIO_LIB)	+= gpiolib.o
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
new file mode 100644
index 0000000..d8db2f8
--- /dev/null
+++ b/drivers/gpio/gpiolib.c
@@ -0,0 +1,567 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+
+#include <asm/gpio.h>
+
+
+/* Optional implementation infrastructure for GPIO interfaces.
+ *
+ * Platforms may want to use this if they tend to use very many GPIOs
+ * that aren't part of a System-On-Chip core; or across I2C/SPI/etc.
+ *
+ * When kernel footprint or instruction count is an issue, simpler
+ * implementations may be preferred.  The GPIO programming interface
+ * allows for inlining speed-critical get/set operations for common
+ * cases, so that access to SOC-integrated GPIOs can sometimes cost
+ * only an instruction or two per bit.
+ */
+
+
+/* When debugging, extend minimal trust to callers and platform code.
+ * Also emit diagnostic messages that may help initial bringup, when
+ * board setup or driver bugs are most common.
+ *
+ * Otherwise, minimize overhead in what may be bitbanging codepaths.
+ */
+#ifdef	DEBUG
+#define	extra_checks	1
+#else
+#define	extra_checks	0
+#endif
+
+/* gpio_lock prevents conflicts during gpio_desc[] table updates.
+ * While any GPIO is requested, its gpio_chip is not removable;
+ * each GPIO's "requested" flag serves as a lock and refcount.
+ */
+static DEFINE_SPINLOCK(gpio_lock);
+
+struct gpio_desc {
+	struct gpio_chip	*chip;
+	unsigned long		flags;
+/* flag symbols are bit numbers */
+#define FLAG_REQUESTED	0
+#define FLAG_IS_OUT	1
+
+#ifdef CONFIG_DEBUG_FS
+	const char		*label;
+#endif
+};
+static struct gpio_desc gpio_desc[ARCH_NR_GPIOS];
+
+static inline void desc_set_label(struct gpio_desc *d, const char *label)
+{
+#ifdef CONFIG_DEBUG_FS
+	d->label = label;
+#endif
+}
+
+/* Warn when drivers omit gpio_request() calls -- legal but ill-advised
+ * when setting direction, and otherwise illegal.  Until board setup code
+ * and drivers use explicit requests everywhere (which won't happen when
+ * those calls have no teeth) we can't avoid autorequesting.  This nag
+ * message should motivate switching to explicit requests...
+ */
+static void gpio_ensure_requested(struct gpio_desc *desc)
+{
+	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
+		pr_warning("GPIO-%d autorequested\n", (int)(desc - gpio_desc));
+		desc_set_label(desc, "[auto]");
+	}
+}
+
+/* caller holds gpio_lock *OR* gpio is marked as requested */
+static inline struct gpio_chip *gpio_to_chip(unsigned gpio)
+{
+	return gpio_desc[gpio].chip;
+}
+
+/**
+ * gpiochip_add() - register a gpio_chip
+ * @chip: the chip to register, with chip->base initialized
+ * Context: potentially before irqs or kmalloc will work
+ *
+ * Returns a negative errno if the chip can't be registered, such as
+ * because the chip->base is invalid or already associated with a
+ * different chip.  Otherwise it returns zero as a success code.
+ */
+int gpiochip_add(struct gpio_chip *chip)
+{
+	unsigned long	flags;
+	int		status = 0;
+	unsigned	id;
+
+	/* NOTE chip->base negative is reserved to mean a request for
+	 * dynamic allocation.  We don't currently support that.
+	 */
+
+	if (chip->base < 0 || (chip->base  + chip->ngpio) >= ARCH_NR_GPIOS) {
+		status = -EINVAL;
+		goto fail;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	/* these GPIO numbers must not be managed by another gpio_chip */
+	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
+		if (gpio_desc[id].chip != NULL) {
+			status = -EBUSY;
+			break;
+		}
+	}
+	if (status == 0) {
+		for (id = chip->base; id < chip->base + chip->ngpio; id++) {
+			gpio_desc[id].chip = chip;
+			gpio_desc[id].flags = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+fail:
+	/* failures here can mean systems won't boot... */
+	if (status)
+		pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
+			chip->base, chip->base + chip->ngpio,
+			chip->label ? : "generic");
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpiochip_add);
+
+/**
+ * gpiochip_remove() - unregister a gpio_chip
+ * @chip: the chip to unregister
+ *
+ * A gpio_chip with any GPIOs still requested may not be removed.
+ */
+int gpiochip_remove(struct gpio_chip *chip)
+{
+	unsigned long	flags;
+	int		status = 0;
+	unsigned	id;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	for (id = chip->base; id < chip->base + chip->ngpio; id++) {
+		if (test_bit(FLAG_REQUESTED, &gpio_desc[id].flags)) {
+			status = -EBUSY;
+			break;
+		}
+	}
+	if (status == 0) {
+		for (id = chip->base; id < chip->base + chip->ngpio; id++)
+			gpio_desc[id].chip = NULL;
+	}
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpiochip_remove);
+
+
+/* These "optional" allocation calls help prevent drivers from stomping
+ * on each other, and help provide better diagnostics in debugfs.
+ * They're called even less than the "set direction" calls.
+ */
+int gpio_request(unsigned gpio, const char *label)
+{
+	struct gpio_desc	*desc;
+	int			status = -EINVAL;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (gpio >= ARCH_NR_GPIOS)
+		goto done;
+	desc = &gpio_desc[gpio];
+	if (desc->chip == NULL)
+		goto done;
+
+	/* NOTE:  gpio_request() can be called in early boot,
+	 * before IRQs are enabled.
+	 */
+
+	if (test_and_set_bit(FLAG_REQUESTED, &desc->flags) == 0) {
+		desc_set_label(desc, label ? : "?");
+		status = 0;
+	} else
+		status = -EBUSY;
+
+done:
+	if (status)
+		pr_debug("gpio_request: gpio-%d (%s) status %d\n",
+			gpio, label ? : "?", status);
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_request);
+
+void gpio_free(unsigned gpio)
+{
+	unsigned long		flags;
+	struct gpio_desc	*desc;
+
+	if (gpio >= ARCH_NR_GPIOS) {
+		WARN_ON(extra_checks);
+		return;
+	}
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	desc = &gpio_desc[gpio];
+	if (desc->chip && test_and_clear_bit(FLAG_REQUESTED, &desc->flags))
+		desc_set_label(desc, NULL);
+	else
+		WARN_ON(extra_checks);
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL_GPL(gpio_free);
+
+
+/**
+ * gpiochip_is_requested - return string iff signal was requested
+ * @chip: controller managing the signal
+ * @offset: of signal within controller's 0..(ngpio - 1) range
+ *
+ * Returns NULL if the GPIO is not currently requested, else a string.
+ * If debugfs support is enabled, the string returned is the label passed
+ * to gpio_request(); otherwise it is a meaningless constant.
+ *
+ * This function is for use by GPIO controller drivers.  The label can
+ * help with diagnostics, and knowing that the signal is used as a GPIO
+ * can help avoid accidentally multiplexing it to another controller.
+ */
+const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned gpio = chip->base + offset;
+
+	if (gpio >= ARCH_NR_GPIOS || gpio_desc[gpio].chip != chip)
+		return NULL;
+	if (test_bit(FLAG_REQUESTED, &gpio_desc[gpio].flags) == 0)
+		return NULL;
+#ifdef CONFIG_DEBUG_FS
+	return gpio_desc[gpio].label;
+#else
+	return "?";
+#endif
+}
+EXPORT_SYMBOL_GPL(gpiochip_is_requested);
+
+
+/* Drivers MUST set GPIO direction before making get/set calls.  In
+ * some cases this is done in early boot, before IRQs are enabled.
+ *
+ * As a rule these aren't called more than once (except for drivers
+ * using the open-drain emulation idiom) so these are natural places
+ * to accumulate extra debugging checks.  Note that we can't (yet)
+ * rely on gpio_request() having been called beforehand.
+ */
+
+int gpio_direction_input(unsigned gpio)
+{
+	unsigned long		flags;
+	struct gpio_chip	*chip;
+	struct gpio_desc	*desc = &gpio_desc[gpio];
+	int			status = -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (gpio >= ARCH_NR_GPIOS)
+		goto fail;
+	chip = desc->chip;
+	if (!chip || !chip->get || !chip->direction_input)
+		goto fail;
+	gpio -= chip->base;
+	if (gpio >= chip->ngpio)
+		goto fail;
+	gpio_ensure_requested(desc);
+
+	/* now we know the gpio is valid and chip won't vanish */
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	might_sleep_if(extra_checks && chip->can_sleep);
+
+	status = chip->direction_input(chip, gpio);
+	if (status == 0)
+		clear_bit(FLAG_IS_OUT, &desc->flags);
+	return status;
+fail:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	if (status)
+		pr_debug("%s: gpio-%d status %d\n",
+			__FUNCTION__, gpio, status);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+	unsigned long		flags;
+	struct gpio_chip	*chip;
+	struct gpio_desc	*desc = &gpio_desc[gpio];
+	int			status = -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+
+	if (gpio >= ARCH_NR_GPIOS)
+		goto fail;
+	chip = desc->chip;
+	if (!chip || !chip->set || !chip->direction_output)
+		goto fail;
+	gpio -= chip->base;
+	if (gpio >= chip->ngpio)
+		goto fail;
+	gpio_ensure_requested(desc);
+
+	/* now we know the gpio is valid and chip won't vanish */
+
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	might_sleep_if(extra_checks && chip->can_sleep);
+
+	status = chip->direction_output(chip, gpio, value);
+	if (status == 0)
+		set_bit(FLAG_IS_OUT, &desc->flags);
+	return status;
+fail:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	if (status)
+		pr_debug("%s: gpio-%d status %d\n",
+			__FUNCTION__, gpio, status);
+	return status;
+}
+EXPORT_SYMBOL_GPL(gpio_direction_output);
+
+
+/* I/O calls are only valid after configuration completed; the relevant
+ * "is this a valid GPIO" error checks should already have been done.
+ *
+ * "Get" operations are often inlinable as reading a pin value register,
+ * and masking the relevant bit in that register.
+ *
+ * When "set" operations are inlinable, they involve writing that mask to
+ * one register to set a low value, or a different register to set it high.
+ * Otherwise locking is needed, so there may be little value to inlining.
+ *
+ *------------------------------------------------------------------------
+ *
+ * IMPORTANT!!!  The hot paths -- get/set value -- assume that callers
+ * have requested the GPIO.  That can include implicit requesting by
+ * a direction setting call.  Marking a gpio as requested locks its chip
+ * in memory, guaranteeing that these table lookups need no more locking
+ * and that gpiochip_remove() will fail.
+ *
+ * REVISIT when debugging, consider adding some instrumentation to ensure
+ * that the GPIO was actually requested.
+ */
+
+/**
+ * __gpio_get_value() - return a gpio's value
+ * @gpio: gpio whose value will be returned
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_get_value().
+ * It returns the zero or nonzero value provided by the associated
+ * gpio_chip.get() method; or zero if no such method is provided.
+ */
+int __gpio_get_value(unsigned gpio)
+{
+	struct gpio_chip	*chip;
+
+	chip = gpio_to_chip(gpio);
+	WARN_ON(extra_checks && chip->can_sleep);
+	return chip->get ? chip->get(chip, gpio - chip->base) : 0;
+}
+EXPORT_SYMBOL_GPL(__gpio_get_value);
+
+/**
+ * __gpio_set_value() - assign a gpio's value
+ * @gpio: gpio whose value will be assigned
+ * @value: value to assign
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_set_value().
+ * It invokes the associated gpio_chip.set() method.
+ */
+void __gpio_set_value(unsigned gpio, int value)
+{
+	struct gpio_chip	*chip;
+
+	chip = gpio_to_chip(gpio);
+	WARN_ON(extra_checks && chip->can_sleep);
+	chip->set(chip, gpio - chip->base, value);
+}
+EXPORT_SYMBOL_GPL(__gpio_set_value);
+
+/**
+ * __gpio_cansleep() - report whether gpio value access will sleep
+ * @gpio: gpio in question
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_cansleep().  It
+ * returns nonzero if access reading or writing the GPIO value can sleep.
+ */
+int __gpio_cansleep(unsigned gpio)
+{
+	struct gpio_chip	*chip;
+
+	/* only call this on GPIOs that are valid! */
+	chip = gpio_to_chip(gpio);
+
+	return chip->can_sleep;
+}
+EXPORT_SYMBOL_GPL(__gpio_cansleep);
+
+
+
+/* There's no value in making it easy to inline GPIO calls that may sleep.
+ * Common examples include ones connected to I2C or SPI chips.
+ */
+
+int gpio_get_value_cansleep(unsigned gpio)
+{
+	struct gpio_chip	*chip;
+
+	might_sleep_if(extra_checks);
+	chip = gpio_to_chip(gpio);
+	return chip->get(chip, gpio - chip->base);
+}
+EXPORT_SYMBOL_GPL(gpio_get_value_cansleep);
+
+void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+	struct gpio_chip	*chip;
+
+	might_sleep_if(extra_checks);
+	chip = gpio_to_chip(gpio);
+	chip->set(chip, gpio - chip->base, value);
+}
+EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
+
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+
+static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	unsigned		i;
+	unsigned		gpio = chip->base;
+	struct gpio_desc	*gdesc = &gpio_desc[gpio];
+	int			is_out;
+
+	for (i = 0; i < chip->ngpio; i++, gpio++, gdesc++) {
+		if (!test_bit(FLAG_REQUESTED, &gdesc->flags))
+			continue;
+
+		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
+		seq_printf(s, " gpio-%-3d (%-12s) %s %s",
+			gpio, gdesc->label,
+			is_out ? "out" : "in ",
+			chip->get
+				? (chip->get(chip, i) ? "hi" : "lo")
+				: "?  ");
+
+		if (!is_out) {
+			int		irq = gpio_to_irq(gpio);
+			struct irq_desc	*desc = irq_desc + irq;
+
+			/* This races with request_irq(), set_irq_type(),
+			 * and set_irq_wake() ... but those are "rare".
+			 *
+			 * More significantly, trigger type flags aren't
+			 * currently maintained by genirq.
+			 */
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+					irq, trigger,
+					(desc->status & IRQ_WAKEUP)
+						? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
+}
+
+static int gpiolib_show(struct seq_file *s, void *unused)
+{
+	struct gpio_chip	*chip = NULL;
+	unsigned		gpio;
+	int			started = 0;
+
+	/* REVISIT this isn't locked against gpio_chip removal ... */
+
+	for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) {
+		if (chip == gpio_desc[gpio].chip)
+			continue;
+		chip = gpio_desc[gpio].chip;
+		if (!chip)
+			continue;
+
+		seq_printf(s, "%sGPIOs %d-%d, %s%s:\n",
+				started ? "\n" : "",
+				chip->base, chip->base + chip->ngpio - 1,
+				chip->label ? : "generic",
+				chip->can_sleep ? ", can sleep" : "");
+		started = 1;
+		if (chip->dbg_show)
+			chip->dbg_show(s, chip);
+		else
+			gpiolib_dbg_show(s, chip);
+	}
+	return 0;
+}
+
+static int gpiolib_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, gpiolib_show, NULL);
+}
+
+static struct file_operations gpiolib_operations = {
+	.open		= gpiolib_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init gpiolib_debugfs_init(void)
+{
+	/* /sys/kernel/debug/gpio */
+	(void) debugfs_create_file("gpio", S_IFREG | S_IRUGO,
+				NULL, NULL, &gpiolib_operations);
+	return 0;
+}
+subsys_initcall(gpiolib_debugfs_init);
+
+#endif	/* DEBUG_FS */
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 2d0aab1..f29a502 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,6 +1,102 @@
 #ifndef _ASM_GENERIC_GPIO_H
 #define _ASM_GENERIC_GPIO_H
 
+#ifdef CONFIG_HAVE_GPIO_LIB
+
+/* Platforms may implement their GPIO interface with library code,
+ * at a small performance cost for non-inlined operations and some
+ * extra memory (for code and for per-GPIO table entries).
+ *
+ * While the GPIO programming interface defines valid GPIO numbers
+ * to be in the range 0..MAX_INT, this library restricts them to the
+ * smaller range 0..ARCH_NR_GPIOS.
+ */
+
+#ifndef ARCH_NR_GPIOS
+#define ARCH_NR_GPIOS		256
+#endif
+
+struct seq_file;
+
+/**
+ * struct gpio_chip - abstract a GPIO controller
+ * @label: for diagnostics
+ * @direction_input: configures signal "offset" as input, or returns error
+ * @get: returns value for signal "offset"; for output signals this
+ *	returns either the value actually sensed, or zero
+ * @direction_output: configures signal "offset" as output, or returns error
+ * @set: assigns output value for signal "offset"
+ * @dbg_show: optional routine to show contents in debugfs; default code
+ *	will be used when this is omitted, but custom code can show extra
+ *	state (such as pullup/pulldown configuration).
+ * @base: identifies the first GPIO number handled by this chip; or, if
+ *	negative during registration, requests dynamic ID allocation.
+ * @ngpio: the number of GPIOs handled by this controller; the last GPIO
+ *	handled is (base + ngpio - 1).
+ * @can_sleep: flag must be set iff get()/set() methods sleep, as they
+ *	must while accessing GPIO expander chips over I2C or SPI
+ *
+ * A gpio_chip can help platforms abstract various sources of GPIOs so
+ * they can all be accessed through a common programing interface.
+ * Example sources would be SOC controllers, FPGAs, multifunction
+ * chips, dedicated GPIO expanders, and so on.
+ *
+ * Each chip controls a number of signals, identified in method calls
+ * by "offset" values in the range 0..(@ngpio - 1).  When those signals
+ * are referenced through calls like gpio_get_value(gpio), the offset
+ * is calculated by subtracting @base from the gpio number.
+ */
+struct gpio_chip {
+	char			*label;
+
+	int			(*direction_input)(struct gpio_chip *chip,
+						unsigned offset);
+	int			(*get)(struct gpio_chip *chip,
+						unsigned offset);
+	int			(*direction_output)(struct gpio_chip *chip,
+						unsigned offset, int value);
+	void			(*set)(struct gpio_chip *chip,
+						unsigned offset, int value);
+	void			(*dbg_show)(struct seq_file *s,
+						struct gpio_chip *chip);
+	int			base;
+	u16			ngpio;
+	unsigned		can_sleep:1;
+};
+
+extern const char *gpiochip_is_requested(struct gpio_chip *chip,
+			unsigned offset);
+
+/* add/remove chips */
+extern int gpiochip_add(struct gpio_chip *chip);
+extern int __must_check gpiochip_remove(struct gpio_chip *chip);
+
+
+/* Always use the library code for GPIO management calls,
+ * or when sleeping may be involved.
+ */
+extern int gpio_request(unsigned gpio, const char *label);
+extern void gpio_free(unsigned gpio);
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+extern int gpio_get_value_cansleep(unsigned gpio);
+extern void gpio_set_value_cansleep(unsigned gpio, int value);
+
+
+/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
+ * the GPIO is constant and refers to some always-present controller,
+ * giving direct access to chip registers and tight bitbanging loops.
+ */
+extern int __gpio_get_value(unsigned gpio);
+extern void __gpio_set_value(unsigned gpio, int value);
+
+extern int __gpio_cansleep(unsigned gpio);
+
+
+#else
+
 /* platforms that don't directly support access to GPIOs through I2C, SPI,
  * or other blocking infrastructure can use these wrappers.
  */
@@ -22,4 +118,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
 	gpio_set_value(gpio, value);
 }
 
+#endif
+
 #endif /* _ASM_GENERIC_GPIO_H */
-- 
1.5.3.8