path: root/recipes/linux/linux-davinci-2.6.28/davinci-sffsdr/0010-Add-generic-FPGA-bitstream-loader-driver.patch

From 500b0887632165f77f2604b07df746b4a3a16d2c Mon Sep 17 00:00:00 2001
From: Hugo Villeneuve <hugo@hugovil.com>
Date: Fri, 6 Mar 2009 10:23:44 -0500
Subject: [PATCH 10/12] Add generic FPGA bitstream loader driver

This driver is a generic interface for programming a
bitstream into a FPGA. It can work with serial or
parallel programming interfaces and support multiple
devices and partial reconfiguration. Currently Xilinx
XC3S and XC4V FPGAs are implemented, but other
manufacturers like Altera could be easily added.

Signed-off-by: Hugo Villeneuve <hugo@hugovil.com>
---
 drivers/misc/Kconfig      |   31 ++
 drivers/misc/Makefile     |    3 +
 drivers/misc/fpgadl.c     |  806 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/misc/fpgadl_par.c |  258 +++++++++++++++
 drivers/misc/fpgadl_ser.c |  244 ++++++++++++++
 include/linux/fpgadl.h    |   96 ++++++
 6 files changed, 1438 insertions(+), 0 deletions(-)
 create mode 100644 drivers/misc/fpgadl.c
 create mode 100644 drivers/misc/fpgadl_par.c
 create mode 100644 drivers/misc/fpgadl_ser.c
 create mode 100644 include/linux/fpgadl.h

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index a11e2a0..bdc0517 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -510,6 +510,37 @@ config SGI_GRU_DEBUG
 	This option enables addition debugging code for the SGI GRU driver. If
 	you are unsure, say N.
 
+config FPGADL
+	tristate "FPGA bitstream loader support"
+	help
+	  This option enables support for the FPGA bitstream loader.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fpgadl.
+
+	  If unsure, say N.
+
+config FPGADL_SER
+	tristate "FPGA serial programming driver"
+	depends on SPI_MASTER && FPGADL
+	help
+	  Say Y here if your FPGA bitstream is loaded using a serial
+	  interface (SPI).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fpgadl_ser.
+
+config FPGADL_PAR
+	tristate "FPGA parallel programming driver"
+	depends on FPGADL
+	select BITREVERSE
+	help
+	  Say Y here if your FPGA bitstream is loaded using a parallel
+	  interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fpgadl_par.
+
 source "drivers/misc/c2port/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 78be134..4fb6dfc 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -32,5 +32,8 @@ obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
 obj-$(CONFIG_KGDB_TESTS)	+= kgdbts.o
 obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
+obj-$(CONFIG_FPGADL)		+= fpgadl.o
+obj-$(CONFIG_FPGADL_SER)	+= fpgadl_ser.o
+obj-$(CONFIG_FPGADL_PAR)	+= fpgadl_par.o
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_C2PORT)		+= c2port/
diff --git a/drivers/misc/fpgadl.c b/drivers/misc/fpgadl.c
new file mode 100644
index 0000000..2f03d9b
--- /dev/null
+++ b/drivers/misc/fpgadl.c
@@ -0,0 +1,806 @@
+/*
+ * fpgadl core driver
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on code found in book "Linux Device Drivers" by
+ * Alessandro Rubini and Jonathan Corbet, published by O'Reilly & Associates.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/fpgadl.h>
+
+#include <asm/gpio.h>
+#include <asm/uaccess.h>
+
+#define MODULE_NAME "fpgadl"
+
+/* Define this to enable verbose debug messages */
+#define FPGADL_DEBUG 1
+
+static const char fpgadl_driver_version[] = "v1.0";
+
+/* Module parameters */
+static unsigned int fpgadl_debug;
+EXPORT_SYMBOL_GPL(fpgadl_debug);
+module_param_named(debug, fpgadl_debug, int, 0644);
+
+#ifdef FPGADL_DEBUG
+#define INFOMSG(fmt, args...)						\
+	do {								\
+		printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ## args);	\
+	} while (0)
+#define DBGMSG(fmt, args...)						\
+	do {								\
+		if (fpgadl_debug > 0)					\
+			printk(KERN_DEBUG "%s: "fmt"\n", \
+			       MODULE_NAME, ## args);	 \
+	} while (0)
+#define DBGMSG_ENTER()				\
+	DBGMSG("%s() enter", __func__);
+#define DBGMSG_LEAVE()				\
+	DBGMSG("%s() leave", __func__);
+#else
+#define INFOMSG(fmt, args...) do {} while (0)
+#define DBGMSG(fmt, args...) do {} while (0)
+#define DBGMSG_ENTER() do {} while (0)
+#define DBGMSG_LEAVE() do {} while (0)
+#endif
+
+#define FAILMSG(fmt, args...)						\
+	do {								\
+		printk(KERN_ERR "%s: "fmt"\n", MODULE_NAME, ## args);	\
+	} while (0)
+
+#define FPGA_WAIT_TIMEOUT	100000
+#define XFER_SIZE		100	/* Transfer size when writing bytes to
+					 * device. */
+
+#define BITSTREAM_MAX_SIZE_OVERHEAD 10240
+
+#define XC3S_WORD_SIZE	2
+#define XC4V_WORD_SIZE	4
+
+#define BITSTREAM_SYNC_BYTE1		0xAA
+#define BITSTREAM_SYNC_BYTE2		0x99
+#define BITSTREAM_SYNC_BYTE3		0x55
+#define BITSTREAM_SYNC_BYTE4 		0x66
+
+#define BITSTREAM_PACKET_HEADER_TYPE1	1
+#define BITSTREAM_PACKET_HEADER_TYPE2	2
+#define BITSTREAM_TYPE1_OPCODE_WRITE	2
+#define BITSTREAM_TYPE1_REG_ADDR_FDRI	2
+
+/* Structure of a TYPE1 packet. */
+struct t1_pkt_xc4v_t {
+	u32 word_count:11;
+	u32 reserved2:2;
+	u32 address:5;
+	u32 reserved1:9;
+	u32 opcode:2;
+	u32 header:3;
+};
+
+struct t1_pkt_xc3s_t {
+	u16 word_count:5;
+	u16 address:6;
+	u16 opcode:2;
+	u16 header:3; /* type */
+};
+
+/* Structure of a TYPE2 packet. */
+struct t2_pkt_xc4v_t {
+	u32 word_count:27;
+	u32 opcode:2; /* Reserved. */
+	u32 header:3;
+};
+
+struct t2_pkt_xc3s_t {
+	u16 word_count:11;
+	u16 opcode:2; /* Reserved. */
+	u16 header:3;
+};
+
+#define MAX_FPGADL_DEV	4
+
+static int fpgadl_dev_count;
+static struct fpgadl_device *fpgadl_dev_array[MAX_FPGADL_DEV];
+
+int fpgadl_is_bitstream_loaded(const char *name)
+{
+	int k;
+	struct fpgadl_device *fpgadl_dev;
+
+	DBGMSG_ENTER();
+
+	for (k = 0; k < MAX_FPGADL_DEV; k++) {
+		fpgadl_dev = fpgadl_dev_array[k];
+		if (fpgadl_dev)
+			if (strncmp(fpgadl_dev->name, name, strlen(name)) == 0)
+				return fpgadl_dev->bitstream_loaded;
+	}
+
+	FAILMSG("  Device <%s> not found", name);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(fpgadl_is_bitstream_loaded);
+
+/* Respond to hotplug events. */
+static int fpgadl_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	DBGMSG_ENTER();
+
+	if (add_uevent_var(env, "FPGADL_BUS_VERSION=%s", fpgadl_driver_version))
+		return -ENOMEM;
+	return 0;
+};
+
+/*
+ * Toggles the CCLK line on the board-specific interface the number of times
+ * specified by <cycles>.
+ */
+static int bitstr_load_make_clock(struct fpgadl_device *fpgadl_dev,
+				  int cycles)
+{
+	int retval;
+	int k;
+	u8 dummy = 0;
+
+	for (k = 0; k < cycles; k++) {
+		retval = fpgadl_dev->write_byte(fpgadl_dev, &dummy, 1);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+/* Search for bitstream sync word. */
+static int bitstr_search_sync_word(const u8 *buffer, size_t length,
+				   const u8 *sync_word, ssize_t sync_word_size)
+{
+	int k;
+
+	for (k = 0; k < length; k++, buffer++) {
+		if (memcmp(buffer, sync_word, sync_word_size) == 0) {
+			DBGMSG("  Synchronization word found at offset 0x%02X",
+			       k);
+			return k;
+		}
+	}
+
+	return 0;
+}
+
+static int bitstr_get_payload_size(int fpga_family, int sws,
+				   const u8 *buffer, ssize_t length)
+{
+	int index = 0;
+
+	/* Find the payload size. */
+	while (index < length) {
+		switch (fpga_family) {
+		case FPGA_FAMILY_XILINX_XC4V:
+		{
+			u32 tmp = ntohl(*((u32 *) &buffer[index]));
+			struct t1_pkt_xc4v_t *t1 =
+				(struct t1_pkt_xc4v_t *) &tmp;
+
+			/* Search for type 1 packet header. */
+			if ((t1->header == BITSTREAM_PACKET_HEADER_TYPE1) &&
+			    (t1->opcode == BITSTREAM_TYPE1_OPCODE_WRITE) &&
+			    (t1->address == BITSTREAM_TYPE1_REG_ADDR_FDRI)) {
+				if (t1->word_count != 0)
+					return t1->word_count;
+				else {
+					struct t2_pkt_xc4v_t *t2;
+
+					tmp = ntohl(*((u32 *)
+						      &buffer[index + sws]));
+					t2 = (struct t2_pkt_xc4v_t *) &tmp;
+
+					/* Search for type 2 packet header just
+					 * after type1 packet. */
+					if ((t2->header ==
+					     BITSTREAM_PACKET_HEADER_TYPE2))
+						return t2->word_count;
+				}
+			}
+		}
+		break;
+		case FPGA_FAMILY_XILINX_XC3S:
+		{
+			u16 tmp = ntohs(*((u16 *) &buffer[index]));
+			struct t2_pkt_xc3s_t *t2 =
+				(struct t2_pkt_xc3s_t *) &tmp;
+
+			/* Search for type 2 packet header just after
+			 * type1 packet. */
+			if ((t2->header == BITSTREAM_PACKET_HEADER_TYPE2)) {
+				DBGMSG("  Type 2 packet found at offset $%02X",
+				       index);
+				return ntohl(*((u32 *) &buffer[index + sws]));
+			}
+			/* Word-size aligned when sync word has been found. */
+			index += sws;
+		}
+		break;
+		}
+
+		/* Word-size aligned when sync word has been found. */
+		index += sws;
+	}
+
+	return 0; /* Not found */
+}
+
+/*
+ * Return value:
+ *   0: Error
+ *   1: Full bitstream
+ *   2: Partial bitstream
+ */
+static int bitstream_parse_header(const u8 *buffer, size_t length,
+				  int fpga_family, size_t payload_full_size)
+{
+	int index = 0;
+	size_t payload_size = 0;
+	u8 sync_word[] = {
+		BITSTREAM_SYNC_BYTE1,
+		BITSTREAM_SYNC_BYTE2,
+		BITSTREAM_SYNC_BYTE3,
+		BITSTREAM_SYNC_BYTE4,
+	};
+	int sync_word_size; /* Size in bytes */
+
+	switch (fpga_family) {
+	case FPGA_FAMILY_XILINX_XC3S:
+		sync_word_size = XC3S_WORD_SIZE;
+		break;
+	case FPGA_FAMILY_XILINX_XC4V:
+		sync_word_size = XC4V_WORD_SIZE;
+		break;
+	default:
+		FAILMSG("Error, invalid FPGA family number");
+		return BITSTREAM_MODE_UNKNOWN;
+	}
+
+	/* Search for bitstream sync word. */
+	index = bitstr_search_sync_word(buffer, length,
+					sync_word, sync_word_size);
+	if (index == 0) {
+		FAILMSG("Error: Synchronization word not found");
+		return BITSTREAM_MODE_UNKNOWN;
+	}
+
+	/* Get payload size. */
+	payload_size = bitstr_get_payload_size(fpga_family, sync_word_size,
+					       &buffer[index], length - index);
+	payload_size *= sync_word_size; /* Length in bytes. */
+
+	if (payload_size == 0) {
+		/* Warning only, assuming FULL bitstream. */
+		DBGMSG("  Warning: payload size not found");
+		return BITSTREAM_MODE_FULL;
+	} else {
+		DBGMSG("  Payload size: %d kb", payload_size / 1024);
+
+		/* Is it a full or a partial bitstream? */
+		if (payload_size == payload_full_size)
+			return BITSTREAM_MODE_FULL;
+		else
+			return BITSTREAM_MODE_PARTIAL;
+	}
+}
+
+/*
+ * Bitstreams supported: Full or Partial.
+ * Note: Full bitstream that supports partial bitstream must be generated with
+ *       option "Persist = true" in ISE.
+ */
+static int fpgadl_bitstream_load(struct fpgadl_device *fpgadl_dev,
+				 const u8 *data, size_t size)
+{
+	int k;
+	int retval;
+	int timeout_counter;
+
+	fpgadl_dev->bitstream_loaded = 0;
+
+	fpgadl_dev->bitstream_mode =
+		bitstream_parse_header(data, size,
+				       fpgadl_dev->pdata->fpga_family,
+				       fpgadl_dev->pdata->payload_full_size);
+	switch (fpgadl_dev->bitstream_mode) {
+	case BITSTREAM_MODE_FULL:
+		DBGMSG("  Bitstream type: FULL");
+		/* Toggle PROG_B Pin and wait 300nS before proceeding. */
+		gpio_set_value(fpgadl_dev->pdata->program_b, 0);
+		udelay(1);
+
+		/* Confirm that INIT_B is low */
+		if (gpio_get_value(fpgadl_dev->pdata->init_b) != 0) {
+			FAILMSG("Error: INIT_B not LOW when PROG is LOW");
+			return -EIO;
+		}
+
+		break;
+	case BITSTREAM_MODE_PARTIAL:
+		DBGMSG("  Bitstream type: PARTIAL");
+		break;
+	case BITSTREAM_MODE_UNKNOWN:
+	default:
+		FAILMSG("  Bitstream type: UNKNOWN");
+		return -EINVAL;
+		break;
+	}
+
+	/* For partial bitstream, PROGRAM_B is already high. */
+	retval = bitstr_load_make_clock(fpgadl_dev, 3);
+	if (retval < 0)
+		return retval;
+
+	gpio_set_value(fpgadl_dev->pdata->program_b, 1);
+
+	/* Wait for INIT_B pin to go high. */
+	timeout_counter = 0;
+	while ((gpio_get_value(fpgadl_dev->pdata->init_b) == 0) &&
+	       (timeout_counter < FPGA_WAIT_TIMEOUT)) {
+		retval = bitstr_load_make_clock(fpgadl_dev, 3);
+		if (retval < 0)
+			return retval;
+
+		timeout_counter++;
+	}
+
+	if (timeout_counter == FPGA_WAIT_TIMEOUT) {
+		/* Timeout error. */
+		FAILMSG("Error: timeout while waiting for INIT_B to go HIGH");
+		return -EIO;
+	}
+
+	/* Send actual bitstream data to FPGA one byte at a time. */
+	for (k = 0; k < size; k += XFER_SIZE) {
+		retval = fpgadl_dev->write_byte(fpgadl_dev,
+						(u8 *) &data[k], XFER_SIZE);
+		if (retval < 0)
+			return retval;
+
+		if (fpgadl_dev->pdata->check_init_low) {
+			if (gpio_get_value(fpgadl_dev->pdata->init_b) == 0) {
+				/* Error if INIT_B goes low here. */
+				FAILMSG("Error: INIT_B LOW during programming");
+				return -EIO;
+			}
+		}
+	}
+
+	/* Pulse the clock line ten times at the end. */
+	retval = bitstr_load_make_clock(fpgadl_dev, 10);
+	if (retval < 0)
+		return retval;
+
+	/* FPGA DONE pin must go high. */
+	timeout_counter = 0;
+	while ((gpio_get_value(fpgadl_dev->pdata->done) == 0) &&
+	       (timeout_counter < FPGA_WAIT_TIMEOUT))
+		timeout_counter++;
+
+	if (gpio_get_value(fpgadl_dev->pdata->done) == 0) {
+		/* Timeout error. */
+		FAILMSG("Error: timeout while waiting for DONE to go HIGH");
+		return -EIO;
+	}
+
+	INFOMSG("Bitstream loaded");
+	fpgadl_dev->bitstream_loaded = 1;
+
+	return 0;
+}
+
+/* Open method. */
+static int fpgadl_open(struct inode *inode, struct file *filp)
+{
+	int k;
+	int found = 0;
+	struct fpgadl_device *fpgadl_dev;
+
+	DBGMSG_ENTER();
+	DBGMSG("  Opening device minor %d", MINOR(inode->i_rdev));
+
+	for (k = 0; k < fpgadl_dev_count; k++) {
+		fpgadl_dev = fpgadl_dev_array[k];
+		if (fpgadl_dev) {
+			if (fpgadl_dev->miscdev.minor == MINOR(inode->i_rdev)) {
+				found = 1;
+				break;
+			}
+		}
+	}
+
+	if (!found) {
+		FAILMSG("  Invalid minor device");
+		return -ENOMEM;
+	}
+
+	filp->private_data = fpgadl_dev;
+
+	fpgadl_dev->bitstream_length = 0;
+	fpgadl_dev->bitstream_data = kmalloc(fpgadl_dev->bitstream_max_size,
+					     GFP_KERNEL);
+	if (!fpgadl_dev->bitstream_data) {
+		FAILMSG("Failed to allocate memory for bitstream");
+		return -ENOMEM;
+	}
+
+	fpgadl_dev->bitstream_buffer_allocated = 1;
+
+	return 0;
+}
+
+/* Write method. Fill buffer with bitstream data. */
+static ssize_t fpgadl_write(struct file *filp, const char __user *buff,
+			    size_t count, loff_t *offp)
+{
+	struct fpgadl_device *fpgadl_dev = filp->private_data;
+
+	if ((fpgadl_dev->bitstream_length + count) >=
+	    fpgadl_dev->bitstream_max_size) {
+		FAILMSG("Bitstream buffer size exceeded");
+		return -EFBIG;
+	}
+
+	if (copy_from_user(fpgadl_dev->bitstream_data +
+			   fpgadl_dev->bitstream_length,
+			   (void __user *) buff, count))
+		return -EFAULT;
+
+	fpgadl_dev->bitstream_length += count;
+
+	return count;
+}
+
+/* Release method. This will initiate the FPGA programming. */
+static int fpgadl_release(struct inode *inode, struct file *filp)
+{
+	int retval;
+	struct fpgadl_device *fpgadl_dev = filp->private_data;
+
+	if (!fpgadl_dev->bitstream_data)
+		return -EFAULT;
+
+	retval = fpgadl_bitstream_load(fpgadl_dev,
+				       fpgadl_dev->bitstream_data,
+				       fpgadl_dev->bitstream_length);
+	kfree(fpgadl_dev->bitstream_data);
+	fpgadl_dev->bitstream_buffer_allocated = 0;
+
+	return retval;
+}
+
+static struct file_operations fops_fpgadl = {
+	.owner   = THIS_MODULE,
+	.open    = fpgadl_open,
+	.write   = fpgadl_write,
+	.release = fpgadl_release
+};
+
+/* Match fpgadl devices to drivers. Just do a simple name test. */
+static int fpgadl_device_match(struct device *dev,
+			       struct device_driver *drv)
+{
+	DBGMSG_ENTER();
+	return !strncmp(dev->bus_id, drv->name, strlen(drv->name));
+}
+
+static ssize_t show_version(struct device_driver *driver, char *buf)
+{
+	struct fpgadl_driver *fpgadldriver = to_fpgadl_driver(driver);
+
+	sprintf(buf, "%s\n", fpgadldriver->version);
+	return strlen(buf);
+}
+
+int fpgadl_register_driver(struct fpgadl_driver *drv)
+{
+	int res;
+
+	DBGMSG_ENTER();
+
+	/* Initialize common driver fields */
+	drv->driver.bus = &fpgadl_bus_type;
+
+	/* Register with core */
+	res = driver_register(&drv->driver);
+	if (res)
+		FAILMSG("  driver_register() failed");
+
+	drv->version_attr.attr.name = "version";
+	drv->version_attr.attr.owner = drv->module;
+	drv->version_attr.attr.mode = S_IRUGO;
+	drv->version_attr.show = show_version;
+	drv->version_attr.store = NULL;
+	res = driver_create_file(&drv->driver, &drv->version_attr);
+
+	return res;
+}
+EXPORT_SYMBOL(fpgadl_register_driver);
+
+void fpgadl_unregister_driver(struct fpgadl_driver *drv)
+{
+	DBGMSG_ENTER();
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(fpgadl_unregister_driver);
+
+/* The fpgadl bus device. */
+static void fpgadl_bus_release(struct device *dev)
+{
+	DBGMSG_ENTER();
+}
+
+struct device fpgadl_bus = {
+	.bus_id   = "fpgadl0",
+	.release  = fpgadl_bus_release
+};
+
+struct bus_type fpgadl_bus_type = {
+	.name = "fpgadl",
+	.match = fpgadl_device_match,
+	.uevent  = fpgadl_uevent,
+};
+EXPORT_SYMBOL(fpgadl_bus_type);
+
+/* Export a simple sysfs attribute. */
+static ssize_t show_bus_version(struct bus_type *bus, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%s\n", fpgadl_driver_version);
+}
+
+static BUS_ATTR(version, S_IRUGO, show_bus_version, NULL);
+
+/*
+ * fpgadl devices.
+ * For now, no references to fpgadlbus devices go out which are not
+ * tracked via the module reference count, so we use a no-op
+ * release function.
+ */
+static void fpgadl_dev_release(struct device *dev)
+{
+	DBGMSG_ENTER();
+}
+
+/* Release DaVinci GPIO to FPGA control pins. */
+static void fpgadl_release_gpio(struct fpgadl_pdata_t *pdata)
+{
+	gpio_free(pdata->done);
+	gpio_free(pdata->init_b);
+	gpio_free(pdata->program_b);
+}
+
+static int fpgadl_setup_gpio(struct fpgadl_pdata_t *pdata)
+{
+	int retval;
+
+	/* Configure FPGA PROGRAM_B GPIO. */
+	retval = gpio_request(pdata->program_b, "fpga_program_b");
+	if (retval == 0) /* FPGA_PROGRAM_B must be initially HIGH. */
+		retval = gpio_direction_output(pdata->program_b, 1);
+	if (retval != 0)
+		goto gpio_error;
+
+	/* Configure FPGA INIT_B GPIO. */
+	retval = gpio_request(pdata->init_b, "fpga_init_b");
+	if (retval == 0)
+		retval = gpio_direction_input(pdata->init_b);
+	if (retval != 0)
+		goto gpio_error;
+
+	/* Configure FPGA DONE GPIO. */
+	retval = gpio_request(pdata->done, "fpga_done");
+	if (retval == 0)
+		retval = gpio_direction_input(pdata->done);
+	if (retval != 0)
+		goto gpio_error;
+
+	return 0;
+
+gpio_error:
+	fpgadl_release_gpio(pdata);
+	return retval;
+}
+
+static void fpgadl_cleanup(struct fpgadl_device *fpgadl_dev)
+{
+	DBGMSG_ENTER();
+
+	if (!fpgadl_dev)
+		return;
+
+	fpgadl_dev_array[fpgadl_dev->id] = NULL;
+
+	/* Get rid of any allocated buffer, not freed */
+	if (fpgadl_dev->bitstream_buffer_allocated)
+		kfree(fpgadl_dev->bitstream_data);
+
+	switch (fpgadl_dev->state) {
+	case FPGADL_DEV_STATE_CHAR_DEV_REGISTERED:
+		misc_deregister(&fpgadl_dev->miscdev);
+	case FPGADL_DEV_STATE_GPIO_REGISTERED:
+		fpgadl_release_gpio(fpgadl_dev->pdata);
+	case FPGADL_DEV_STATE_DEVICE_REGISTERED:
+		device_unregister(&fpgadl_dev->dev);
+	case FPGADL_DEV_STATE_START:
+		break;
+	}
+}
+
+int fpgadl_register_device(struct fpgadl_device *fpgadl_dev)
+{
+	int res;
+	const struct firmware *fw_entry;
+
+	DBGMSG_ENTER();
+
+	fpgadl_dev->state = FPGADL_DEV_STATE_START;
+
+	/* Sanity checks. */
+	if (!fpgadl_dev->name) {
+		FAILMSG("  Error, missing device name");
+		res = -EFAULT;
+		goto error;
+	}
+
+	if (!fpgadl_dev->write_byte) {
+		FAILMSG("  Error, missing write_byte() callback");
+		res = -ENOMEM;
+		goto error;
+	}
+
+	if (fpgadl_dev_count == MAX_FPGADL_DEV) {
+		FAILMSG("Maximum number of devices reached (%d)",
+			fpgadl_dev_count);
+		res = -ENODEV;
+		goto error;
+	}
+
+	DBGMSG("  device %d", fpgadl_dev_count);
+
+	/* Set some default values. */
+	fpgadl_dev->bitstream_loaded = 0;
+	fpgadl_dev->bitstream_buffer_allocated = 0;
+	fpgadl_dev->bitstream_max_size =
+		fpgadl_dev->pdata->payload_full_size +
+		BITSTREAM_MAX_SIZE_OVERHEAD;
+
+	fpgadl_dev->dev.bus = &fpgadl_bus_type;
+	fpgadl_dev->dev.parent = &fpgadl_bus;
+	fpgadl_dev->dev.release = fpgadl_dev_release;
+	strncpy(fpgadl_dev->dev.bus_id, fpgadl_dev->name, BUS_ID_SIZE);
+	res = device_register(&fpgadl_dev->dev);
+	if (res) {
+		FAILMSG("  device_register() failed");
+		goto error;
+	}
+	fpgadl_dev->state = FPGADL_DEV_STATE_DEVICE_REGISTERED;
+
+	res = fpgadl_setup_gpio(fpgadl_dev->pdata);
+	if (res < 0) {
+		FAILMSG("Error registering GPIOs");
+		goto error;
+	}
+	fpgadl_dev->state = FPGADL_DEV_STATE_GPIO_REGISTERED;
+
+	fpgadl_dev->miscdev.name = fpgadl_dev->name;
+	fpgadl_dev->miscdev.minor = MISC_DYNAMIC_MINOR;
+	fpgadl_dev->miscdev.fops = &fops_fpgadl;
+	res = misc_register(&fpgadl_dev->miscdev);
+	if (res < 0) {
+		FAILMSG("Error registering misc driver");
+		goto error;
+	}
+	DBGMSG("  MINOR = %d", fpgadl_dev->miscdev.minor);
+	fpgadl_dev->state = FPGADL_DEV_STATE_CHAR_DEV_REGISTERED;
+
+	/* Try to load firmware through hotplug if available. */
+	res = request_firmware(&fw_entry, fpgadl_dev->pdata->bitstream_name,
+			       &fpgadl_dev->dev);
+	if (res < 0) {
+		/* Not an error preventing the driver from being loaded. */
+		res = 0;
+		DBGMSG("Info: firmware not available");
+	} else {
+		res = fpgadl_bitstream_load(fpgadl_dev, fw_entry->data,
+					    fw_entry->size);
+		release_firmware(fw_entry);
+	}
+
+	fpgadl_dev->id = fpgadl_dev_count;
+	fpgadl_dev_array[fpgadl_dev_count] = fpgadl_dev;
+	fpgadl_dev_count++;
+
+	return 0;
+
+error:
+	fpgadl_cleanup(fpgadl_dev);
+	return res;
+}
+EXPORT_SYMBOL(fpgadl_register_device);
+
+void fpgadl_unregister_device(struct fpgadl_device *fpgadl_dev)
+{
+	DBGMSG_ENTER();
+	fpgadl_cleanup(fpgadl_dev);
+}
+EXPORT_SYMBOL(fpgadl_unregister_device);
+
+static int __init fpgadl_init(void)
+{
+	int res;
+
+	DBGMSG_ENTER();
+	INFOMSG("FPGA bitstream loader %s", fpgadl_driver_version);
+
+	res = bus_register(&fpgadl_bus_type);
+	if (res) {
+		FAILMSG("  bus_register() failed");
+		goto fail_bus;
+	}
+
+	if (bus_create_file(&fpgadl_bus_type, &bus_attr_version)) {
+		FAILMSG("Unable to create version attribute");
+		goto fail_create_file;
+	}
+
+	res = device_register(&fpgadl_bus);
+	if (res) {
+		FAILMSG("  failed registering %s", fpgadl_bus.bus_id);
+		goto fail_dev_reg;
+	}
+
+	return 0;
+
+fail_dev_reg:
+fail_create_file:
+	bus_unregister(&fpgadl_bus_type);
+fail_bus:
+	return res;
+}
+module_init(fpgadl_init);
+
+static void __exit fpgadl_exit(void)
+{
+	DBGMSG_ENTER();
+	device_unregister(&fpgadl_bus);
+	bus_unregister(&fpgadl_bus_type);
+}
+module_exit(fpgadl_exit);
+
+MODULE_AUTHOR("Hugo Villeneuve <hvilleneuve@lyrtech.com>");
+MODULE_DESCRIPTION("FPGA bitstream loader");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/fpgadl_par.c b/drivers/misc/fpgadl_par.c
new file mode 100644
index 0000000..66f8eba
--- /dev/null
+++ b/drivers/misc/fpgadl_par.c
@@ -0,0 +1,258 @@
+/*
+ * fpgadl_par.c - FPGA parallel programming driver
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/bitrev.h>
+#include <linux/fpgadl.h>
+
+#include <asm/gpio.h> /* For ioremap() */
+
+#define MODULE_NAME "fpgadl_par"
+#define MODULE_VERSION_STR "v1.0"
+
+/* Define this to enable verbose debug messages */
+#define FPGADL_PAR_DEBUG 1
+
+/* Module parameters */
+static unsigned int fpgadl_par_debug;
+EXPORT_SYMBOL_GPL(fpgadl_par_debug);
+module_param_named(debug, fpgadl_par_debug, int, 0644);
+
+#ifdef FPGADL_PAR_DEBUG
+#define INFOMSG(fmt, args...) \
+do { \
+  printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+#define DBGMSG(fmt, args...) \
+do { if (fpgadl_par_debug > 0) \
+  printk(KERN_DEBUG "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+#define DBGMSG_ENTER() \
+  DBGMSG("%s() enter", __func__);
+#define DBGMSG_LEAVE() \
+  DBGMSG("%s() leave", __func__);
+#else
+#define INFOMSG(fmt, args...) do {} while (0)
+#define DBGMSG(fmt, args...) do {} while (0)
+#define DBGMSG_ENTER() do {} while (0)
+#define DBGMSG_LEAVE() do {} while (0)
+#endif
+
+#define FAILMSG(fmt, args...) \
+do { \
+  printk(KERN_ERR "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+
+struct fpgadl_par_dev_t {
+	char devname[32];
+	enum {
+		FPGADL_PAR_DEV_STATE_STRUCT_ALLOCATED,
+		FPGADL_PAR_DEV_STATE_HAVE_IOREMAP,
+		FPGADL_PAR_DEV_STATE_FPGADL_DEV_REGISTERED,
+	} state;
+	u8 *selectmap;
+	struct fpgadl_device fpgadl_dev;
+};
+
+#define MAX_FPGADL_PAR_DEV 5
+
+static int fpgadl_par_dev_count;
+
+/*
+ * Writes a byte of data to the FPGA using the SelectMAP
+ * interface. The FPGA_SELECT_MAP_REG address is within
+ * the FPGA address space (CS3), and when we write a byte
+ * to that address, the CCLK line will be toggled.
+ */
+static int selectmap_write_byte(struct fpgadl_device *fpgadl_dev,
+				u8 *data, int size)
+{
+	int k;
+	struct fpgadl_par_dev_t *fpgadl_par_dev;
+
+	fpgadl_par_dev = (struct fpgadl_par_dev_t *) fpgadl_dev->devdata;
+
+	for (k = 0; k < size; k++)
+		fpgadl_par_dev->selectmap[0] = bitrev8(data[k]);
+
+	return 0;
+}
+
+static void fpgadl_par_cleanup(struct fpgadl_par_dev_t *dev)
+{
+	DBGMSG("fpgadl_par_cleanup");
+
+	if (!dev)
+		return;
+
+	switch (dev->state) {
+	case FPGADL_PAR_DEV_STATE_FPGADL_DEV_REGISTERED:
+		fpgadl_unregister_device(&dev->fpgadl_dev);
+	case FPGADL_PAR_DEV_STATE_HAVE_IOREMAP:
+		iounmap(dev->selectmap);
+	case FPGADL_PAR_DEV_STATE_STRUCT_ALLOCATED:
+		kfree(dev);
+		break;
+	}
+}
+
+static int __devinit fpgadl_par_probe(struct platform_device *pdev)
+{
+	int len;
+	int res;
+	struct fpgadl_par_dev_t *dev = NULL;
+	const struct resource *selectmap_res;
+
+	DBGMSG("fpgadl_par_probe()");
+
+	if (fpgadl_par_dev_count == MAX_FPGADL_PAR_DEV) {
+		FAILMSG("Maximum number of devices reached (%d)",
+			fpgadl_par_dev_count);
+		res = -ENODEV;
+		goto error;
+	}
+
+	DBGMSG("  device %d", fpgadl_par_dev_count);
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		FAILMSG("Failed to allocate device structure");
+		res = -ENOMEM;
+		goto error;
+	}
+	/* Set some default values. */
+	dev->state = FPGADL_PAR_DEV_STATE_STRUCT_ALLOCATED;
+
+	if (!pdev->dev.platform_data) {
+		FAILMSG("Error getting platform data");
+		res = -ENODEV;
+		goto error;
+	}
+	dev->fpgadl_dev.pdata = pdev->dev.platform_data;
+	pdev->dev.driver_data = dev; /* Private driver data */
+
+	/* Assign virtual addresses to SELECTMAP I/O memory regions. */
+	selectmap_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+						     "selectmap");
+	if (!selectmap_res) {
+		FAILMSG("Error getting selectmap ressource");
+		res = -ENODEV;
+		goto error;
+	}
+	len = selectmap_res->end - selectmap_res->start;
+	dev->selectmap = ioremap(selectmap_res->start, len);
+	if (!dev->selectmap) {
+		FAILMSG("Can't remap selectmap register");
+		res = -ENXIO;
+		goto error;
+	}
+	dev->state = FPGADL_PAR_DEV_STATE_HAVE_IOREMAP;
+
+	dev->fpgadl_dev.write_byte = selectmap_write_byte;
+	sprintf(dev->devname, "fpgadl_par%d", fpgadl_par_dev_count);
+	DBGMSG("  NAME = %s", dev->devname);
+	dev->fpgadl_dev.name = dev->devname;
+	dev->fpgadl_dev.devdata = dev; /* For our write_byte() callback */
+	res = fpgadl_register_device(&dev->fpgadl_dev);
+	if (res < 0) {
+		FAILMSG("Error registering fpgadl_par device");
+		goto error;
+	}
+	dev->state = FPGADL_PAR_DEV_STATE_FPGADL_DEV_REGISTERED;
+
+	fpgadl_par_dev_count++;
+
+	return 0;
+
+error:
+	fpgadl_par_cleanup(dev);
+	return res;
+}
+
+static int __devexit fpgadl_par_remove(struct platform_device *pdev)
+{
+	struct fpgadl_par_dev_t *dev = platform_get_drvdata(pdev);
+
+	DBGMSG("fpgadl_par_remove()");
+
+	fpgadl_par_cleanup(dev);
+
+	return 0;
+}
+
+static struct fpgadl_driver fpgadl_par_driver = {
+	.version = MODULE_VERSION_STR,
+	.module  = THIS_MODULE,
+	.driver = {
+		.name = "fpgadl_par",
+	},
+};
+
+static struct platform_driver fpgadl_platform_driver = {
+	.driver         = {
+		.name   = MODULE_NAME,
+		.owner  = THIS_MODULE,
+	},
+	.remove = fpgadl_par_remove,
+};
+
+static int __init fpgadl_par_init(void)
+{
+	int res;
+
+	DBGMSG("fpgadl_par_init()");
+
+	/* Register with the driver core. */
+	res = fpgadl_register_driver(&fpgadl_par_driver);
+	if (res) {
+		FAILMSG("Can't register fpgadl parallel driver");
+		return res;
+	}
+
+	/* The probe function will be called for each platform device declared
+	 * in board setup code. */
+	res = platform_driver_probe(&fpgadl_platform_driver,
+				    fpgadl_par_probe);
+	if (res) {
+		FAILMSG("platform_driver_probe() failed");
+		return res;
+	}
+
+	return 0;
+}
+module_init(fpgadl_par_init);
+
+static void __exit fpgadl_par_exit(void)
+{
+	DBGMSG("fpgadl_par_exit()");
+	platform_driver_unregister(&fpgadl_platform_driver);
+	fpgadl_unregister_driver(&fpgadl_par_driver);
+}
+module_exit(fpgadl_par_exit);
+
+MODULE_AUTHOR("Hugo Villeneuve <hvilleneuve@lyrtech.com>");
+MODULE_DESCRIPTION("FPGA parallel programming driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/fpgadl_ser.c b/drivers/misc/fpgadl_ser.c
new file mode 100644
index 0000000..01ca5e0
--- /dev/null
+++ b/drivers/misc/fpgadl_ser.c
@@ -0,0 +1,244 @@
+/*
+ * fpgadl_ser.c - FPGA serial programming driver
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on SH SCI SPI interface
+ *   Copyright (c) 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fpgadl.h>
+
+#define MODULE_NAME "fpgadl_ser"
+#define MODULE_VERSION_STR "v1.0"
+
+/* Define this to enable verbose debug messages */
+#define FPGADL_SER_DEBUG 1
+
+/* Module parameters */
+static unsigned int fpgadl_ser_debug;
+EXPORT_SYMBOL_GPL(fpgadl_ser_debug);
+module_param_named(debug, fpgadl_ser_debug, int, 0644);
+
+#ifdef FPGADL_SER_DEBUG
+#define INFOMSG(fmt, args...) \
+do { \
+  printk(KERN_INFO "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+#define DBGMSG(fmt, args...) \
+do { if (fpgadl_ser_debug > 0) \
+  printk(KERN_DEBUG "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+#define DBGMSG_ENTER() \
+  DBGMSG("%s() enter", __func__);
+#define DBGMSG_LEAVE() \
+  DBGMSG("%s() leave", __func__);
+#else
+#define INFOMSG(fmt, args...) do {} while (0)
+#define DBGMSG(fmt, args...) do {} while (0)
+#define DBGMSG_ENTER() do {} while (0)
+#define DBGMSG_LEAVE() do {} while (0)
+#endif
+
+#define FAILMSG(fmt, args...) \
+do { \
+  printk(KERN_ERR "%s: "fmt"\n", MODULE_NAME, ## args); } while (0)
+
+struct fpgadl_ser_dev_t {
+	char devname[32];
+	enum {
+		FPGADL_SER_DEV_STATE_STRUCT_ALLOCATED,
+		FPGADL_SER_DEV_STATE_SPI_SETUP,
+		FPGADL_SER_DEV_STATE_FPGADL_DEV_REGISTERED,
+	} state;
+	struct spi_transfer t;
+	struct spi_message m;
+	struct spi_device *spi;
+	struct fpgadl_device fpgadl_dev;
+};
+
+#define MAX_FPGADL_SER_DEV 5
+
+static int fpgadl_ser_dev_count;
+
+static int fpgadl_ser_write_byte(struct fpgadl_device *fpgadl_dev,
+				   u8 *data, int size)
+{
+	int status;
+	struct fpgadl_ser_dev_t *fpgadl_ser_dev;
+
+	fpgadl_ser_dev = (struct fpgadl_ser_dev_t *) fpgadl_dev->devdata;
+
+	if (!data) {
+		FAILMSG("NULL data pointer");
+		return -EFAULT;
+	}
+
+	spi_message_init(&fpgadl_ser_dev->m);
+	fpgadl_ser_dev->t.tx_buf = data;
+	fpgadl_ser_dev->t.len = size;
+	spi_message_add_tail(&fpgadl_ser_dev->t, &fpgadl_ser_dev->m);
+
+	status = spi_sync(fpgadl_ser_dev->spi, &fpgadl_ser_dev->m);
+	if (status < 0)
+		FAILMSG("spi_sync() failed (%d)", status);
+
+	return status;
+}
+
+static void fpgadl_ser_cleanup(struct fpgadl_ser_dev_t *dev)
+{
+	DBGMSG_ENTER();
+
+	if (!dev)
+		return;
+
+	switch (dev->state) {
+	case FPGADL_SER_DEV_STATE_FPGADL_DEV_REGISTERED:
+		fpgadl_unregister_device(&dev->fpgadl_dev);
+	case FPGADL_SER_DEV_STATE_SPI_SETUP:
+	case FPGADL_SER_DEV_STATE_STRUCT_ALLOCATED:
+		kfree(dev);
+		break;
+	}
+}
+
+static int __devinit fpgadl_ser_probe(struct spi_device *spi)
+{
+	int res;
+	struct fpgadl_ser_dev_t *dev = NULL;
+
+	DBGMSG_ENTER();
+
+	if (fpgadl_ser_dev_count == MAX_FPGADL_SER_DEV) {
+		FAILMSG("Maximum number of devices reached (%d)",
+			fpgadl_ser_dev_count);
+		res = -ENODEV;
+		goto error;
+	}
+
+	DBGMSG("  device %d", fpgadl_ser_dev_count);
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev) {
+		FAILMSG("Failed to allocate device structure");
+		res = -ENOMEM;
+		goto error;
+	}
+	/* Set some default values. */
+	dev->state = FPGADL_SER_DEV_STATE_STRUCT_ALLOCATED;
+
+	DBGMSG("  SPI mode = %d", spi->mode);
+
+	if (!spi->dev.platform_data) {
+		FAILMSG("Error getting platform data");
+		res = -ENODEV;
+		goto error;
+	}
+	dev->fpgadl_dev.pdata = spi->dev.platform_data;
+	spi->dev.driver_data = dev; /* Private driver data */
+
+	spi->bits_per_word = 8; /* Size of Tx and Rx transfers. */
+	res = spi_setup(spi);
+	if (res < 0) {
+		FAILMSG("Error setting-up SPI");
+		goto error;
+	}
+	dev->spi = spi;
+	dev->state = FPGADL_SER_DEV_STATE_SPI_SETUP;
+
+	dev->fpgadl_dev.write_byte = fpgadl_ser_write_byte;
+	sprintf(dev->devname, "fpgadl_ser%d", fpgadl_ser_dev_count);
+	DBGMSG("  NAME = %s", dev->devname);
+	dev->fpgadl_dev.name = dev->devname;
+	dev->fpgadl_dev.devdata = dev; /* For our write_byte() callback */
+	res = fpgadl_register_device(&dev->fpgadl_dev);
+	if (res < 0) {
+		FAILMSG("Error registering fpgadl_ser device");
+		goto error;
+	}
+	dev->state = FPGADL_SER_DEV_STATE_FPGADL_DEV_REGISTERED;
+
+	fpgadl_ser_dev_count++;
+
+	return 0;
+
+error:
+	fpgadl_ser_cleanup(dev);
+	return res;
+}
+
+static int __devexit fpgadl_ser_remove(struct spi_device *spi)
+{
+	struct fpgadl_ser_dev_t *dev = spi_get_drvdata(spi);
+
+	DBGMSG_ENTER();
+	fpgadl_ser_cleanup(dev);
+	return 0;
+}
+
+static struct spi_driver fpgadl_ser_spi_driver = {
+	.driver = {
+		.name	= MODULE_NAME,
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= fpgadl_ser_probe,
+	.remove		= fpgadl_ser_remove,
+};
+
+static struct fpgadl_driver fpgadl_ser_driver = {
+	.version = MODULE_VERSION_STR,
+	.module  = THIS_MODULE,
+	.driver = {
+		.name = "fpgadl_ser",
+	},
+};
+
+static int __init fpgadl_ser_init(void)
+{
+	int res;
+
+	DBGMSG_ENTER();
+
+	/* Register with the driver core. */
+	res = fpgadl_register_driver(&fpgadl_ser_driver);
+	if (res) {
+		FAILMSG("Can't register fpgadl serial driver");
+		return res;
+	}
+
+	return spi_register_driver(&fpgadl_ser_spi_driver);
+}
+module_init(fpgadl_ser_init);
+
+static void __exit fpgadl_ser_exit(void)
+{
+	DBGMSG_ENTER();
+	spi_unregister_driver(&fpgadl_ser_spi_driver);
+	fpgadl_unregister_driver(&fpgadl_ser_driver);
+}
+module_exit(fpgadl_ser_exit);
+
+MODULE_DESCRIPTION("FPGA serial programming driver");
+MODULE_AUTHOR("Hugo Villeneuve");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/fpgadl.h b/include/linux/fpgadl.h
new file mode 100644
index 0000000..27d83f1
--- /dev/null
+++ b/include/linux/fpgadl.h
@@ -0,0 +1,96 @@
+/*
+ * FPGA bitstream load header file.
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef FPGADL_H
+#define FPGADL_H 1
+
+#include <linux/miscdevice.h>
+
+/* FPGA device-specific informations and functions. */
+struct fpgadl_pdata_t {
+	enum {
+		FPGA_VENDOR_XILINX,
+		FPGA_VENDOR_ALTERA,
+	} fpga_vendor;
+	enum {
+		FPGA_FAMILY_XILINX_XC3S,
+		FPGA_FAMILY_XILINX_XC4V,
+	} fpga_family;
+	ssize_t payload_full_size;
+	u8 program_b;
+	u8 init_b;
+	u8 done;
+	char *bitstream_name;
+	int check_init_low; /* Set to 1 to check that the INIT pin is low during
+			     * programming. Normally, we should check if INIT_B
+			     * is low during configuration, indicating a
+			     * configuration error. But this may cause problems
+			     * for bitstreams where the INIT_B pin is used as a
+			     * GPIO after configuration. */
+};
+
+struct fpgadl_driver {
+	char *version;
+	struct module *module;
+	struct device_driver driver;
+	struct driver_attribute version_attr;
+};
+
+struct fpgadl_device {
+	int id;
+	char *name;
+	enum {
+		FPGADL_DEV_STATE_START,
+		FPGADL_DEV_STATE_DEVICE_REGISTERED,
+		FPGADL_DEV_STATE_GPIO_REGISTERED,
+		FPGADL_DEV_STATE_CHAR_DEV_REGISTERED,
+	} state;
+	int bitstream_buffer_allocated;
+	u8 *bitstream_data;
+	size_t bitstream_length;
+	size_t bitstream_max_size;
+	int bitstream_mode;
+	int bitstream_loaded;
+	int (*write_byte)(struct fpgadl_device *, u8 *, int);
+	void *devdata; /* Pointer to interface-specific (SPI/PAR) device */
+	struct miscdevice miscdev;
+	struct fpgadl_driver *driver;
+	struct fpgadl_pdata_t *pdata;
+	struct device dev;
+};
+
+/* Bitstream types. */
+#define BITSTREAM_MODE_UNKNOWN	0
+#define BITSTREAM_MODE_FULL	1
+#define BITSTREAM_MODE_PARTIAL	2
+
+extern struct bus_type fpgadl_bus_type;
+
+#define to_fpgadl_driver(drv) container_of(drv, struct fpgadl_driver, driver);
+
+extern int fpgadl_register_driver(struct fpgadl_driver *drv);
+extern void fpgadl_unregister_driver(struct fpgadl_driver *drv);
+
+extern int fpgadl_register_device(struct fpgadl_device *fpgadldev);
+extern void fpgadl_unregister_device(struct fpgadl_device *fpgadldev);
+
+int fpgadl_is_bitstream_loaded(const char *name);
+
+#endif /* FPGADL_H */
-- 
1.5.4.5