1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
Index: linux-2.6.29/arch/powerpc/platforms/83xx/mpc831x_rdb.c
===================================================================
--- linux-2.6.29.orig/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2009-03-24 00:12:14.000000000 +0100
+++ linux-2.6.29/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2009-04-01 17:37:53.000000000 +0200
@@ -15,17 +15,87 @@
#include <linux/pci.h>
#include <linux/of_platform.h>
+#include <linux/spi/spi.h>
#include <asm/time.h>
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <linux/interrupt.h>
#include "mpc83xx.h"
/*
* Setup the architecture
*/
+struct gpio {
+ __be32 gpdir;
+ __be32 gpodr;
+ __be32 gpdat;
+ __be32 gpier;
+ __be32 gpimr;
+ __be32 gpicr;
+} __attribute__ ((packed));
+static struct gpio *gpio_regs;
+
+static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
+{
+ //printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
+ if (polarity)
+ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+ else
+ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+}
+
+static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
+{
+//printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
+ if (polarity)
+ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+ else
+ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+
+}
+
+//static struct mmc_spi_platform_data mpc8313_mmc_pdata = {
+// .ocr_mask = MMC_VDD_33_34,
+//};
+
+static struct spi_board_info mpc8313_spi_boardinfo = {
+ .bus_num = 0x7000,
+ .chip_select = 0,
+ .max_speed_hz = 50000000,
+ .modalias = "spidev",
+// .platform_data = &mpc8313_mmc_pdata,
+};
+
+static int __init mpc8313_spi_init(void)
+{
+ __be32 __iomem *psicrl;
+
+ /* System I/O Configuration Register Low */
+ psicrl = ioremap(get_immrbase() + MPC83XX_SICRL_OFFS, 0x4);
+ gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
+ if (!psicrl || !gpio_regs)
+ return -ENOMEM;
+
+ clrbits32(psicrl, 0x03F00000);
+ setbits32(psicrl, 0x30000000);
+ iounmap(psicrl);
+
+ /* set GPIO13 as output */
+ setbits32(&gpio_regs->gpdir, 1 << (31 - 14));
+ clrbits32(&gpio_regs->gpodr, 1 << (31 - 14));
+ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
+
+ return fsl_spi_init(&mpc8313_spi_boardinfo, 1,
+ mpc83xx_spi_activate_cs,
+ mpc83xx_spi_deactivate_cs);
+}
+
+device_initcall(mpc8313_spi_init);
+
static void __init mpc831x_rdb_setup_arch(void)
{
#ifdef CONFIG_PCI
@@ -40,6 +110,8 @@
mpc83xx_add_bridge(np);
#endif
mpc831x_usb_cfg();
+
+ mpc8313_spi_init();
}
static void __init mpc831x_rdb_init_IRQ(void)
Index: linux-2.6.29/drivers/spi/spi_mpc83xx.c
===================================================================
--- linux-2.6.29.orig/drivers/spi/spi_mpc83xx.c 2009-03-24 00:12:14.000000000 +0100
+++ linux-2.6.29/drivers/spi/spi_mpc83xx.c 2009-04-01 17:37:53.000000000 +0200
@@ -280,7 +280,9 @@
if (pm)
pm--;
- cs->hw_mode |= SPMODE_PM(pm);
+ cs->hw_mode = 0x0F700000;
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+
regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
if (cs->hw_mode != regval) {
unsigned long flags;
@@ -448,7 +450,7 @@
cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
/* mask out bits we are going to set */
cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
- | SPMODE_REV | SPMODE_LOOP);
+ | SPMODE_REV );
if (spi->mode & SPI_CPHA)
cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
@@ -456,8 +458,10 @@
cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
if (!(spi->mode & SPI_LSB_FIRST))
cs->hw_mode |= SPMODE_REV;
- if (spi->mode & SPI_LOOP)
- cs->hw_mode |= SPMODE_LOOP;
+
+ cs->hw_mode = 0x0F700000;
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
retval = mpc83xx_spi_setup_transfer(spi, NULL);
if (retval < 0) {
@@ -637,7 +641,7 @@
INIT_LIST_HEAD(&mpc83xx_spi->queue);
mpc83xx_spi->workqueue = create_singlethread_workqueue(
- master->dev.parent->bus_id);
+ dev->dev.bus_id);
if (mpc83xx_spi->workqueue == NULL) {
ret = -EBUSY;
goto free_irq;
|
