path: root/recipes/at91bootstrap/files/0004-AFEB9260-133-board-support.patch

From ef96ec1464569eb42788076d27c9aa9376a3c396 Mon Sep 17 00:00:00 2001
From: Sergey Lapin <slapin@slind.org>
Date: Sat, 27 Sep 2008 01:34:49 +0400
Subject: [PATCH] AFEB9260-133 board support


Signed-off-by: Sergey Lapin <slapin@ossfans.org>
---
 board/afeb9260-133/afeb9260-133.c           |  403 +++++++++++++++++++++++++++
 board/afeb9260-133/afeb9260-133.mk          |    8 +
 board/afeb9260-133/dataflash/afeb9260-133.h |  127 +++++++++
 board/afeb9260-133/nandflash/afeb9260-133.h |  151 ++++++++++
 board/afeb9260-133/pll.h                    |   35 +++
 5 files changed, 724 insertions(+), 0 deletions(-)
 create mode 100644 board/afeb9260-133/afeb9260-133.c
 create mode 100644 board/afeb9260-133/afeb9260-133.mk
 create mode 100644 board/afeb9260-133/dataflash/afeb9260-133.h
 create mode 100644 board/afeb9260-133/nandflash/afeb9260-133.h
 create mode 100644 board/afeb9260-133/pll.h

diff --git a/board/afeb9260-133/afeb9260-133.c b/board/afeb9260-133/afeb9260-133.c
new file mode 100644
index 0000000..f54f7a7
--- /dev/null
+++ b/board/afeb9260-133/afeb9260-133.c
@@ -0,0 +1,403 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2006, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : at91sam9260ek.c
+ * Object              :
+ * Creation            : NLe Jul 13th 2006
+ * ODi Nov 9th         : dstp #3507 "Bad PIO descriptors in at91samxxxek.c"
+ *-----------------------------------------------------------------------------
+ */
+#include "../../include/part.h"
+#include "../../include/gpio.h"
+#include "../../include/pmc.h"
+#include "../../include/debug.h"
+#include "../../include/sdramc.h"
+#include "../../include/main.h"
+#ifdef CFG_NANDFLASH
+#include "../../include/nandflash.h"
+#endif
+#ifdef CFG_DATAFLASH
+#include "../../include/dataflash.h"
+#endif
+#ifdef CFG_FLASH
+#include "../../include/flash.h"
+#endif
+static inline unsigned int get_cp15(void)
+{
+	unsigned int value;
+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
+	return value;
+}
+
+static inline void set_cp15(unsigned int value)
+{
+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
+}
+
+#ifdef CFG_HW_INIT
+/*----------------------------------------------------------------------------*/
+/* \fn    hw_init							      */
+/* \brief This function performs very low level HW initialization	      */
+/* This function is invoked as soon as possible during the c_startup	      */
+/* The bss segment must be initialized					      */
+/*----------------------------------------------------------------------------*/
+void hw_init(void)
+{
+	unsigned int cp15;
+	
+	/* Disable watchdog */
+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
+
+	/* At this stage the main oscillator is supposed to be enabled
+	 * PCK = MCK = MOSC */
+
+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
+
+	/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
+
+	/* Configure PLLB */
+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
+
+	/* Configure CP15 */
+	/* Using procedure from u-boot for arm926ejs */
+	cp15 = get_cp15();
+	cp15 &= ~I_CACHE;
+	set_cp15(cp15);
+
+	/* Configure the PIO controller */
+	writel(3 << 14, AT91C_BASE_PIOB + PIO_ASR(0));
+	writel(3 << 14, AT91C_BASE_PIOB + PIO_PDR(0));
+
+#ifdef CFG_DEBUG
+	/* Enable Debug messages on the DBGU */
+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
+	/* Configure CP15 */
+	/* Using procedure from u-boot for arm926ejs */
+#if 0
+	cp15 = get_cp15();
+	cp15 |= 0xC0000000;
+	set_cp15(cp15);
+#endif
+
+	dbg_print("AT91 bootstrap loading from @< 0x8400\n\r");
+#endif /* CFG_DEBUG */
+
+#ifdef CFG_SDRAM
+	/* Initialize the matrix */
+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
+
+	/* Configure SDRAM Controller */
+
+#define HYNIX
+
+//#define MICRON
+#ifdef MICRON
+#define MICRON_REFRESH 1420 /* 15.625 us / 11 ns @ 180 Mhz*/
+	sdram_init(	AT91C_SDRAMC_NC_9  |
+				AT91C_SDRAMC_NR_12 |
+				AT91C_SDRAMC_CAS_2 |
+				AT91C_SDRAMC_NB_4_BANKS |
+				AT91C_SDRAMC_DBW_32_BITS |
+				AT91C_SDRAMC_TWR_2 | // 1 CLK+7ns
+				AT91C_SDRAMC_TRC_7 | // 60 ns
+				AT91C_SDRAMC_TRP_3 | // 15 ns
+				AT91C_SDRAMC_TRCD_3 | // 15 ns
+				AT91C_SDRAMC_TRAS_7 | // 37-120 ns
+				AT91C_SDRAMC_TXSR_7, /* 67ns */ /* Control Register */
+				/* 600 700 735 */ MICRON_REFRESH /* 740 1536*/ );	/* Refresh Timer Register */
+
+#endif
+/* 
+HY57V561620BT-H
+     *CAS lat		*tRCD		*tRAS		*tRC		*tRP		tAC	tOH
+133	2		2		6		8		2		5.4ns	2.7ns
+125	3		3		6		9		3		6ns	3ns
+100	2		2		5		7		2		6ns	3ns
+
+*/
+#ifdef HYNIX
+#if defined(PLLA_180MHz)
+/* CLK= 11ns */
+/* TWR = tDPL = 2 2CLK always */
+/* TRC = tRC = 65ns = 6 clk */
+/* TRP = tRP = 20ns = 2 clk */
+/* TRCD = tRCD = 20ns = 2 clk */
+/* TRAS = tRAS = 45ns = 5 clk */
+/* TXSR = tRRC = 65ns = 6 clk */
+
+	sdram_init(	AT91C_SDRAMC_NC_9  |
+				AT91C_SDRAMC_NR_13 |
+				AT91C_SDRAMC_CAS_2 |
+				AT91C_SDRAMC_NB_4_BANKS |
+				AT91C_SDRAMC_DBW_32_BITS |
+				AT91C_SDRAMC_TWR_2 |
+				AT91C_SDRAMC_TRC_6 | /* *7 */
+				AT91C_SDRAMC_TRP_2 |
+				AT91C_SDRAMC_TRCD_2 |
+				AT91C_SDRAMC_TRAS_5 | /* *5 */
+				AT91C_SDRAMC_TXSR_6, /* *8 */	/* Control Register */
+				710);	/* Refresh Timer Register */
+
+#elif defined(PLLA_120MHz)
+/* CLK= 16ns, MCLK=60MHz */
+/* TWR = tDPL = 2 2CLK always */
+/* TRC = tRC = 65ns = 4 clk */
+/* TRP = tRP = 20ns = 2 clk */
+/* TRCD = tRCD = 20ns = 2 clk */
+/* TRAS = tRAS = 45ns = 3 clk */
+/* TXSR = tRRC = 65ns = 4 clk */
+
+	sdram_init(	AT91C_SDRAMC_NC_9  |
+				AT91C_SDRAMC_NR_13 |
+				AT91C_SDRAMC_CAS_2 |
+				AT91C_SDRAMC_NB_4_BANKS |
+				AT91C_SDRAMC_DBW_32_BITS |
+				AT91C_SDRAMC_TWR_2 |
+				AT91C_SDRAMC_TRC_4 |
+				AT91C_SDRAMC_TRP_2 |
+				AT91C_SDRAMC_TRCD_2 |
+				AT91C_SDRAMC_TRAS_3 | /* *5 */
+				AT91C_SDRAMC_TXSR_4, /* *8 */	/* Control Register */
+				1032);	/* Refresh Timer Register */
+#else
+#error define PLLA180MHz
+#endif
+#endif /* HYNIX */
+#endif /* CFG_SDRAM */
+
+#ifdef	CFG_FLASH
+	flash_hw_init();
+#endif
+	nandflash_hw_init();
+	dbg_print("CP15=\r\n");
+	dbg_print_hex(get_cp15);
+}
+#endif /* CFG_HW_INIT */
+
+#ifdef CFG_SDRAM
+/*------------------------------------------------------------------------------*/
+/* \fn    sdramc_hw_init							*/
+/* \brief This function performs SDRAMC HW initialization			*/
+/*------------------------------------------------------------------------------*/
+void sdramc_hw_init(void)
+{
+	/* Configure PIOs */
+/*	const struct pio_desc sdramc_pio[] = {
+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+*/
+	/* Configure the SDRAMC PIO controller to output PCK0 */
+/*	pio_setup(sdramc_pio); */
+
+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
+
+}
+#endif /* CFG_SDRAM */
+
+#ifdef CFG_DATAFLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn    df_recovery								*/
+/* \brief This function erases DataFlash Page 0 if BP4 is pressed 		*/
+/*        during boot sequence							*/
+/*------------------------------------------------------------------------------*/
+void df_recovery(AT91PS_DF pDf)
+{
+#if 0
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
+	/* Configure PIOs */
+	const struct pio_desc bp4_pio[] = {
+		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+
+	/* Configure the PIO controller */
+	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
+	pio_setup(bp4_pio);
+	
+	/* If BP4 is pressed during Boot sequence */
+	/* Erase NandFlash block 0*/
+	if ( !pio_get_value(AT91C_PIN_PA(31)) )
+		df_page_erase(pDf, 0);
+#endif
+#endif
+}
+
+/*------------------------------------------------------------------------------*/
+/* \fn    df_hw_init								*/
+/* \brief This function performs DataFlash HW initialization			*/
+/*------------------------------------------------------------------------------*/
+void df_hw_init(void)
+{
+#if 0
+	/* Configure PIOs */
+	const struct pio_desc df_pio[] = {
+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
+#endif
+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
+		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
+#endif
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+
+	/* Configure the PIO controller */
+	pio_setup(df_pio);
+#else
+	writel(0xf, 0xfffff444);
+	writel(0xf, 0xfffff460);
+	writel(0xf, 0xfffff470);
+	writel(0xf, 0xfffff404);
+	writel(1 << 11, AT91C_BASE_PIOC + PIO_BSR(0));
+	writel(1 << 11, AT91C_BASE_PIOC + PIO_PDR(0));
+#endif
+}
+#endif /* CFG_DATAFLASH */
+
+#ifdef CFG_FLASH
+
+/*------------------------------------------------------------------------------*/
+/* \fn    flash_hw_init								*/
+/* \brief This function performs Flash HW initialization			*/
+/*------------------------------------------------------------------------------*/
+void flash_hw_init(void)
+{
+	/* Configure PIOs */
+	const struct pio_desc flash_pio[] = {
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+
+	/* Configure the PIO controller */
+	pio_setup(flash_pio);
+}
+
+#endif /* CFG_FLASH */
+
+#ifdef CFG_NANDFLASH
+/*------------------------------------------------------------------------------*/
+/* \fn    nand_recovery						*/
+/* \brief This function erases NandFlash Block 0 if BP4 is pressed 		*/
+/*        during boot sequence							*/
+/*------------------------------------------------------------------------------*/
+static void nand_recovery(void)
+{
+	/* Configure PIOs */
+	const struct pio_desc bp4_pio[] = {
+		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
+	};
+
+	/* Configure the PIO controller */
+	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
+	pio_setup(bp4_pio);
+	
+	/* If BP4 is pressed during Boot sequence */
+	/* Erase NandFlash block 0*/
+	if (!pio_get_value(AT91C_PIN_PA(31)) )
+		AT91F_NandEraseBlock0();
+}
+#endif
+/*------------------------------------------------------------------------------*/
+/* \fn    nandflash_hw_init							*/
+/* \brief NandFlash HW init							*/
+/*------------------------------------------------------------------------------*/
+void nandflash_hw_init(void)
+{
+#if 0
+	/* Configure PIOs */
+	const struct pio_desc nand_pio[] = {
+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
+	};
+#endif
+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
+		    
+	/* Configure SMC CS3 */
+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
+  		AT91C_SMC_DBW_WIDTH_EIGTH_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
+
+	/* Configure the PIO controller */
+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
+
+	writel(1 << 13, AT91C_BASE_PIOC + PIO_IFDR(0));
+	writel(1 << 13, AT91C_BASE_PIOC + PIO_PPUER(0));
+	writel(1 << 13, AT91C_BASE_PIOC + PIO_ODR(0));
+	writel(1 << 14, AT91C_BASE_PIOC + PIO_CODR(0));
+	writel(1 << 14, AT91C_BASE_PIOC + PIO_MDDR(0));
+	writel(1 << 14, AT91C_BASE_PIOC + PIO_PPUDR(0));
+	writel(1 << 14, AT91C_BASE_PIOC + PIO_OER(0));
+	writel(3 << 13, AT91C_BASE_PIOC + PIO_IDR(0));
+	writel(3 << 13, AT91C_BASE_PIOC + PIO_PER(0));
+
+#if 0	
+	nand_recovery();
+#endif
+}
+
+
+#if 0
+/*------------------------------------------------------------------------------*/
+/* \fn    nandflash_cfg_16bits_dbw_init						*/
+/* \brief Configure SMC in 16 bits mode						*/
+/*------------------------------------------------------------------------------*/
+void nandflash_cfg_16bits_dbw_init(void)
+{
+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
+}
+
+#endif /* #ifdef CFG_NANDFLASH */
diff --git a/board/afeb9260-133/afeb9260-133.mk b/board/afeb9260-133/afeb9260-133.mk
new file mode 100644
index 0000000..84e45d3
--- /dev/null
+++ b/board/afeb9260-133/afeb9260-133.mk
@@ -0,0 +1,8 @@
+# Target name (case sensitive!!!)
+TARGET=AFEB9260_133
+# Board name (case sensitive!!!)
+BOARD=afeb9260-133
+# Link Address and Top_of_Memory
+LINK_ADDR=0x200000
+TOP_OF_MEMORY=0x301000
+
diff --git a/board/afeb9260-133/dataflash/afeb9260-133.h b/board/afeb9260-133/dataflash/afeb9260-133.h
new file mode 100644
index 0000000..2ebb020
--- /dev/null
+++ b/board/afeb9260-133/dataflash/afeb9260-133.h
@@ -0,0 +1,127 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2006, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaiimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : at91sam9260ek.h
+ * Object              :
+ * Creation            : NLe Jul 13th 2006
+ *-----------------------------------------------------------------------------
+ */
+#ifndef _AFEB9260_133_H
+#define _AFEB9260_133_H
+#include	"spi.h"
+#include	"pll.h"
+
+/* ******************************************************************* */
+/* DataFlash Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define AT91C_BASE_SPI	AT91C_BASE_SPI0
+#define AT91C_ID_SPI	AT91C_ID_SPI0
+
+/* SPI CLOCK */
+#define AT91C_SPI_CLK 		 5000000
+/* AC characteristics */
+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
+#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
+
+#define DF_CS_SETTINGS 		((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
+
+
+/* ******************************************************************* */
+/* BootStrap Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+
+#define IMG_ADDRESS 		0x8400		/* Image Address in DataFlash */
+
+#if	defined(IMG_SIZE)
+#warning			"IMG_SIZE redefined"
+#else
+#define	IMG_SIZE		0x39000	/* Image Size in DataFlash    */
+#endif
+
+#if	defined(JUMP_ADDR)
+#warning			"JUMP_ADDR redefined"
+#else
+#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+#endif
+
+/* ******************************************************************* */
+/* NandFlash Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define AT91C_SMARTMEDIA_BASE	0x40000000
+
+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
+
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
+
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
+
+
+/* ******************************************************************** */
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
+/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000.			*/
+/* Please refer to SMC section in AT91SAM9261 datasheet to learn how 	*/
+/* to generate these values. 						*/
+/* ******************************************************************** */
+
+#define AT91C_SM_NWE_SETUP	(2 << 0)
+#define AT91C_SM_NCS_WR_SETUP	(2 << 8)
+#define AT91C_SM_NRD_SETUP	(2 << 16)
+#define AT91C_SM_NCS_RD_SETUP	(2 << 24)
+  
+#define AT91C_SM_NWE_PULSE 	(4 << 0)
+#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
+#define AT91C_SM_NRD_PULSE	(4 << 16)
+#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
+  
+#define AT91C_SM_NWE_CYCLE 	(8 << 0)
+#define AT91C_SM_NRD_CYCLE	(8 << 16)
+
+#define AT91C_SM_TDF	        (2 << 16)
+
+
+
+/* ******************************************************************* */
+/* Application Settings                                                */
+/* ******************************************************************* */
+#define CFG_DEBUG
+#define CFG_DATAFLASH
+#define	CFG_SDRAM
+#define	CFG_HW_INIT
+
+
+#endif	/* _AT91SAM9260EK_H */
diff --git a/board/afeb9260-133/nandflash/afeb9260-133.h b/board/afeb9260-133/nandflash/afeb9260-133.h
new file mode 100644
index 0000000..414d30c
--- /dev/null
+++ b/board/afeb9260-133/nandflash/afeb9260-133.h
@@ -0,0 +1,151 @@
+/* ----------------------------------------------------------------------------
+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2006, Atmel Corporation
+
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * - Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the disclaimer below in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ * File Name           : at91sam9260ek.h
+ * Object              :
+ * Creation            : NLe Sep 28th 2006
+ *-----------------------------------------------------------------------------
+ */
+#ifndef _AFEB9260_133_H
+#define _AFEB9260_133_H
+#include	"spi.h"
+#include	"pll.h"
+
+/* ******************************************************************* */
+/* DataFlash Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define AT91C_BASE_SPI	AT91C_BASE_SPI0
+#define AT91C_ID_SPI	AT91C_ID_SPI0
+
+/* SPI CLOCK */
+#define AT91C_SPI_CLK 		 5000000
+/* AC characteristics */
+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
+#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
+
+#define DF_CS_SETTINGS 		((SPI_MODE) | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
+
+
+/* ******************************************************************* */
+/* NandFlash Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define AT91C_SMARTMEDIA_BASE	0x40000000
+
+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
+
+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
+
+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
+
+
+/* ******************************************************************** */
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
+/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000.			*/
+/* Please refer to SMC section in AT91SAM9261 datasheet to learn how 	*/
+/* to generate these values. 						*/
+/* ******************************************************************** */
+
+#define AT91C_SM_NWE_SETUP	(2 << 0)
+#define AT91C_SM_NCS_WR_SETUP	(2 << 8)
+#define AT91C_SM_NRD_SETUP	(2 << 16)
+#define AT91C_SM_NCS_RD_SETUP	(2 << 24)
+  
+#define AT91C_SM_NWE_PULSE 	(4 << 0)
+#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
+#define AT91C_SM_NRD_PULSE	(4 << 16)
+#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
+  
+#define AT91C_SM_NWE_CYCLE 	(8 << 0)
+#define AT91C_SM_NRD_CYCLE	(8 << 16)
+
+#define AT91C_SM_TDF	        (2 << 16)
+
+
+/* ******************************************************************** */
+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
+/* Micron 16bits 256Mb for MASTER_CLOCK = 100000000.			*/
+/* Please refer to SMC section in AT91SAM9261 datasheet to learn how 	*/
+/* to generate these values. 						*/
+/* ******************************************************************** */
+/*#define AT91C_SM_NWE_SETUP	(0 << 0)
+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
+#define AT91C_SM_NRD_SETUP	(0 << 16)
+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
+  
+#define AT91C_SM_NWE_PULSE 	(2 << 0)
+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
+#define AT91C_SM_NRD_PULSE	(2 << 16)
+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
+  
+#define AT91C_SM_NWE_CYCLE 	(3 << 0)
+#define AT91C_SM_NRD_CYCLE	(3 << 16)
+
+#define AT91C_SM_TDF	        (1 << 16)
+*/
+
+/* ******************************************************************* */
+/* BootStrap Settings                                                  */
+/*                                                                     */
+/* ******************************************************************* */
+#define MACH_TYPE      		0x44B       	/* AT91SAM9260-EK */
+
+#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
+
+#if	defined(IMG_SIZE)
+#warning			"IMG_SIZE redefined"
+#else
+#define	IMG_SIZE		0x30000		/* Image Size in NandFlash    */
+#endif
+
+#if	defined(JUMP_ADDR)
+#warning			"JUMP_ADDR redefined"
+#else
+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
+#endif
+
+/* ******************************************************************* */
+/* Application Settings                                                */
+/* ******************************************************************* */
+#define CFG_DEBUG
+#undef CFG_DATAFLASH
+
+#define CFG_NANDFLASH
+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
+
+#define CFG_HW_INIT
+#define CFG_SDRAM
+
+#endif	/* _AT91SAM9260EK_H */
diff --git a/board/afeb9260-133/pll.h b/board/afeb9260-133/pll.h
new file mode 100644
index 0000000..907aaa0
--- /dev/null
+++ b/board/afeb9260-133/pll.h
@@ -0,0 +1,35 @@
+/* ******************************************************************* */
+/* PMC Settings                                                        */
+/*                                                                     */
+/* The main oscillator is enabled as soon as possible in the c_startup */
+/* and MCK is switched on the main oscillator.                         */
+/* PLL initialization is done later in the hw_init() function          */
+/* ******************************************************************* */
+#define PLL_LOCK_TIMEOUT	1000000
+
+#define PLLA_120MHz
+
+#ifdef PLLA_200MHz
+#define PLLA_SETTINGS	0x2060BF09
+#define MASTER_CLOCK		(198656000/2)
+#endif
+
+#ifdef PLLA_180MHz
+#define PLLA_SETTINGS	0x2125BF1E /* 180MHz */
+#define MASTER_CLOCK		(179999198/2) /* 180MHz MCK=90MHz */
+#endif
+
+#ifdef PLLA_120MHz
+//#define PLLA_SETTINGS	0x2125BF2d /* 120MHz */
+//#define MASTER_CLOCK		(119999322) /* 120MHz MCK=60MHz*/
+#define PLLA_SETTINGS	0x2125BF2d /* 120MHz */
+#define MASTER_CLOCK		(119999465/2) /* 120MHz MCK=60MHz*/
+#endif
+
+#if !defined(PLLA_180MHz) && !defined(PLLA_120MHz)
+#error Define PLLA frequency
+#endif
+#define PLLB_SETTINGS	0x10483F0E
+
+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
+#define MCKR_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-- 
1.5.6.5