path: root/packages/webkit/webkit-gtk/acinclude.m4

dnl dolt, a replacement for libtool
dnl Copyright © 2007-2008 Josh Triplett <josh@freedesktop.org>
dnl Copying and distribution of this file, with or without modification,
dnl are permitted in any medium without royalty provided the copyright
dnl notice and this notice are preserved.
dnl
dnl To use dolt, invoke the DOLT macro immediately after the libtool macros.
dnl Optionally, copy this file into acinclude.m4, to avoid the need to have it
dnl installed when running autoconf on your project.

AC_DEFUN([DOLT], [
AC_REQUIRE([AC_CANONICAL_HOST])
# dolt, a replacement for libtool
# Josh Triplett <josh@freedesktop.org>
AC_PATH_PROG(DOLT_BASH, bash)
AC_MSG_CHECKING([if dolt supports this host])
dolt_supported=yes
if test x$DOLT_BASH = x; then
    dolt_supported=no
fi
if test x$GCC != xyes; then
    dolt_supported=no
fi
case $host in
i?86-*-linux*|x86_64-*-linux*|powerpc-*-linux* \
|amd64-*-freebsd*|i?86-*-freebsd*|ia64-*-freebsd*)
    pic_options='-fPIC'
    ;;
i?86-apple-darwin*)
    pic_options='-fno-common'
    ;;
*)
    dolt_supported=no
    ;;
esac
if test x$dolt_supported = xno ; then
    AC_MSG_RESULT([no, falling back to libtool])
    LTCOMPILE='$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(COMPILE)'
    LTCXXCOMPILE='$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXXCOMPILE)'
else
    AC_MSG_RESULT([yes, replacing libtool])

dnl Start writing out doltcompile.
    cat <<__DOLTCOMPILE__EOF__ >doltcompile
#!$DOLT_BASH
__DOLTCOMPILE__EOF__
    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
args=("$[]@")
for ((arg=0; arg<${#args@<:@@@:>@}; arg++)) ; do
    if test x"${args@<:@$arg@:>@}" = x-o ; then
        objarg=$((arg+1))
        break
    fi
done
if test x$objarg = x ; then
    echo 'Error: no -o on compiler command line' 1>&2
    exit 1
fi
lo="${args@<:@$objarg@:>@}"
obj="${lo%.lo}"
if test x"$lo" = x"$obj" ; then
    echo "Error: libtool object file name \"$lo\" does not end in .lo" 1>&2
    exit 1
fi
objbase="${obj##*/}"
__DOLTCOMPILE__EOF__

dnl Write out shared compilation code.
    if test x$enable_shared = xyes; then
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
libobjdir="${obj%$objbase}.libs"
if test ! -d "$libobjdir" ; then
    mkdir_out="$(mkdir "$libobjdir" 2>&1)"
    mkdir_ret=$?
    if test "$mkdir_ret" -ne 0 && test ! -d "$libobjdir" ; then
	echo "$mkdir_out" 1>&2
        exit $mkdir_ret
    fi
fi
pic_object="$libobjdir/$objbase.o"
args@<:@$objarg@:>@="$pic_object"
__DOLTCOMPILE__EOF__
    cat <<__DOLTCOMPILE__EOF__ >>doltcompile
"\${args@<:@@@:>@}" $pic_options -DPIC || exit \$?
__DOLTCOMPILE__EOF__
    fi

dnl Write out static compilation code.
dnl Avoid duplicate compiler output if also building shared objects.
    if test x$enable_static = xyes; then
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
non_pic_object="$obj.o"
args@<:@$objarg@:>@="$non_pic_object"
__DOLTCOMPILE__EOF__
        if test x$enable_shared = xyes; then
            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" >/dev/null 2>&1 || exit $?
__DOLTCOMPILE__EOF__
        else
            cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
"${args@<:@@@:>@}" || exit $?
__DOLTCOMPILE__EOF__
        fi
    fi

dnl Write out the code to write the .lo file.
dnl The second line of the .lo file must match "^# Generated by .*libtool"
    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
{
echo "# $lo - a libtool object file"
echo "# Generated by doltcompile, not libtool"
__DOLTCOMPILE__EOF__

    if test x$enable_shared = xyes; then
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "pic_object='.libs/${objbase}.o'"
__DOLTCOMPILE__EOF__
    else
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo pic_object=none
__DOLTCOMPILE__EOF__
    fi

    if test x$enable_static = xyes; then
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo "non_pic_object='${objbase}.o'"
__DOLTCOMPILE__EOF__
    else
        cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
echo non_pic_object=none
__DOLTCOMPILE__EOF__
    fi

    cat <<'__DOLTCOMPILE__EOF__' >>doltcompile
} > "$lo"
__DOLTCOMPILE__EOF__

dnl Done writing out doltcompile; substitute it for libtool compilation.
    chmod +x doltcompile
    LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)'
    LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)'

dnl automake ignores LTCOMPILE and LTCXXCOMPILE when it has separate CFLAGS for
dnl a target, so write out a libtool wrapper to handle that case.
dnl Note that doltlibtool does not handle inferred tags or option arguments
dnl without '=', because automake does not use them.
    cat <<__DOLTLIBTOOL__EOF__ > doltlibtool
#!$DOLT_BASH
__DOLTLIBTOOL__EOF__
    cat <<'__DOLTLIBTOOL__EOF__' >>doltlibtool
top_builddir_slash="${0%%doltlibtool}"
: ${top_builddir_slash:=./}
args=()
modeok=false
tagok=false
for arg in "$[]@"; do
    case "$arg" in
        --mode=compile) modeok=true ;;
        --tag=CC|--tag=CXX) tagok=true ;;
        *) args+=("$arg")
    esac
done
if $modeok && $tagok ; then
    . ${top_builddir_slash}doltcompile "${args@<:@@@:>@}"
else
    exec ${top_builddir_slash}libtool "$[]@"
fi
__DOLTLIBTOOL__EOF__

dnl Done writing out doltlibtool; substitute it for libtool.
    chmod +x doltlibtool
    LIBTOOL='$(top_builddir)/doltlibtool'
fi
AC_SUBST(LTCOMPILE)
AC_SUBST(LTCXXCOMPILE)
# end dolt
])

# ===========================================================================
#           http://autoconf-archive.cryp.to/ax_compare_version.html
# ===========================================================================
#
# SYNOPSIS
#
#   AX_COMPARE_VERSION(VERSION_A, OP, VERSION_B, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
#
# DESCRIPTION
#
#   This macro compares two version strings. Due to the various number of
#   minor-version numbers that can exist, and the fact that string
#   comparisons are not compatible with numeric comparisons, this is not
#   necessarily trivial to do in a autoconf script. This macro makes doing
#   these comparisons easy.
#
#   The six basic comparisons are available, as well as checking equality
#   limited to a certain number of minor-version levels.
#
#   The operator OP determines what type of comparison to do, and can be one
#   of:
#
#    eq  - equal (test A == B)
#    ne  - not equal (test A != B)
#    le  - less than or equal (test A <= B)
#    ge  - greater than or equal (test A >= B)
#    lt  - less than (test A < B)
#    gt  - greater than (test A > B)
#
#   Additionally, the eq and ne operator can have a number after it to limit
#   the test to that number of minor versions.
#
#    eq0 - equal up to the length of the shorter version
#    ne0 - not equal up to the length of the shorter version
#    eqN - equal up to N sub-version levels
#    neN - not equal up to N sub-version levels
#
#   When the condition is true, shell commands ACTION-IF-TRUE are run,
#   otherwise shell commands ACTION-IF-FALSE are run. The environment
#   variable 'ax_compare_version' is always set to either 'true' or 'false'
#   as well.
#
#   Examples:
#
#     AX_COMPARE_VERSION([3.15.7],[lt],[3.15.8])
#     AX_COMPARE_VERSION([3.15],[lt],[3.15.8])
#
#   would both be true.
#
#     AX_COMPARE_VERSION([3.15.7],[eq],[3.15.8])
#     AX_COMPARE_VERSION([3.15],[gt],[3.15.8])
#
#   would both be false.
#
#     AX_COMPARE_VERSION([3.15.7],[eq2],[3.15.8])
#
#   would be true because it is only comparing two minor versions.
#
#     AX_COMPARE_VERSION([3.15.7],[eq0],[3.15])
#
#   would be true because it is only comparing the lesser number of minor
#   versions of the two values.
#
#   Note: The characters that separate the version numbers do not matter. An
#   empty string is the same as version 0. OP is evaluated by autoconf, not
#   configure, so must be a string, not a variable.
#
#   The author would like to acknowledge Guido Draheim whose advice about
#   the m4_case and m4_ifvaln functions make this macro only include the
#   portions necessary to perform the specific comparison specified by the
#   OP argument in the final configure script.
#
# LAST MODIFICATION
#
#   2008-04-12
#
# COPYLEFT
#
#   Copyright (c) 2008 Tim Toolan <toolan@ele.uri.edu>
#
#   Copying and distribution of this file, with or without modification, are
#   permitted in any medium without royalty provided the copyright notice
#   and this notice are preserved.

dnl #########################################################################
AC_DEFUN([AX_COMPARE_VERSION], [
  AC_PROG_AWK

  # Used to indicate true or false condition
  ax_compare_version=false

  # Convert the two version strings to be compared into a format that
  # allows a simple string comparison.  The end result is that a version
  # string of the form 1.12.5-r617 will be converted to the form
  # 0001001200050617.  In other words, each number is zero padded to four
  # digits, and non digits are removed.
  AS_VAR_PUSHDEF([A],[ax_compare_version_A])
  A=`echo "$1" | sed -e 's/\([[0-9]]*\)/Z\1Z/g' \
                     -e 's/Z\([[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/Z\([[0-9]][[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/Z\([[0-9]][[0-9]][[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/[[^0-9]]//g'`

  AS_VAR_PUSHDEF([B],[ax_compare_version_B])
  B=`echo "$3" | sed -e 's/\([[0-9]]*\)/Z\1Z/g' \
                     -e 's/Z\([[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/Z\([[0-9]][[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/Z\([[0-9]][[0-9]][[0-9]]\)Z/Z0\1Z/g' \
                     -e 's/[[^0-9]]//g'`

  dnl # In the case of le, ge, lt, and gt, the strings are sorted as necessary
  dnl # then the first line is used to determine if the condition is true.
  dnl # The sed right after the echo is to remove any indented white space.
  m4_case(m4_tolower($2),
  [lt],[
    ax_compare_version=`echo "x$A
x$B" | sed 's/^ *//' | sort -r | sed "s/x${A}/false/;s/x${B}/true/;1q"`
  ],
  [gt],[
    ax_compare_version=`echo "x$A
x$B" | sed 's/^ *//' | sort | sed "s/x${A}/false/;s/x${B}/true/;1q"`
  ],
  [le],[
    ax_compare_version=`echo "x$A
x$B" | sed 's/^ *//' | sort | sed "s/x${A}/true/;s/x${B}/false/;1q"`
  ],
  [ge],[
    ax_compare_version=`echo "x$A
x$B" | sed 's/^ *//' | sort -r | sed "s/x${A}/true/;s/x${B}/false/;1q"`
  ],[
    dnl Split the operator from the subversion count if present.
    m4_bmatch(m4_substr($2,2),
    [0],[
      # A count of zero means use the length of the shorter version.
      # Determine the number of characters in A and B.
      ax_compare_version_len_A=`echo "$A" | $AWK '{print(length)}'`
      ax_compare_version_len_B=`echo "$B" | $AWK '{print(length)}'`

      # Set A to no more than B's length and B to no more than A's length.
      A=`echo "$A" | sed "s/\(.\{$ax_compare_version_len_B\}\).*/\1/"`
      B=`echo "$B" | sed "s/\(.\{$ax_compare_version_len_A\}\).*/\1/"`
    ],
    [[0-9]+],[
      # A count greater than zero means use only that many subversions
      A=`echo "$A" | sed "s/\(\([[0-9]]\{4\}\)\{m4_substr($2,2)\}\).*/\1/"`
      B=`echo "$B" | sed "s/\(\([[0-9]]\{4\}\)\{m4_substr($2,2)\}\).*/\1/"`
    ],
    [.+],[
      AC_WARNING(
        [illegal OP numeric parameter: $2])
    ],[])

    # Pad zeros at end of numbers to make same length.
    ax_compare_version_tmp_A="$A`echo $B | sed 's/./0/g'`"
    B="$B`echo $A | sed 's/./0/g'`"
    A="$ax_compare_version_tmp_A"

    # Check for equality or inequality as necessary.
    m4_case(m4_tolower(m4_substr($2,0,2)),
    [eq],[
      test "x$A" = "x$B" && ax_compare_version=true
    ],
    [ne],[
      test "x$A" != "x$B" && ax_compare_version=true
    ],[
      AC_WARNING([illegal OP parameter: $2])
    ])
  ])

  AS_VAR_POPDEF([A])dnl
  AS_VAR_POPDEF([B])dnl

  dnl # Execute ACTION-IF-TRUE / ACTION-IF-FALSE.
  if test "$ax_compare_version" = "true" ; then
    m4_ifvaln([$4],[$4],[:])dnl
    m4_ifvaln([$5],[else $5])dnl
  fi
]) dnl AX_COMPARE_VERSION