summaryrefslogtreecommitdiff
path: root/packages/uboot/u-boot-1.1.2/mnci.patch
blob: d69cf8eb725cf373ebe0bff2ccdf5bbd052f7624 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007

#
# Patch managed by http://www.holgerschurig.de/patcher.html
#

--- u-boot-1.1.2/CREDITS~mnci
+++ u-boot-1.1.2/CREDITS
@@ -360,6 +360,9 @@
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
 
+N: Holger Schurig
+D: Support for MNCI-RX "Ramses"
+
 N: Yasushi Shoji
 E: yashi@atmark-techno.com
 D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
--- u-boot-1.1.2/MAINTAINERS~mnci
+++ u-boot-1.1.2/MAINTAINERS
@@ -396,6 +396,10 @@
 	csb226			xscale
 	innokom			xscale
 
+Holger Schurig
+
+	mnci			xscale
+
 Andrea Scian <andrea.scian@dave-tech.it>
 
 	B2				ARM7TDMI (S3C44B0X)
--- u-boot-1.1.2/Makefile~mnci
+++ u-boot-1.1.2/Makefile
@@ -1388,6 +1388,9 @@
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250
 
+mnci_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa mnci
+
 xaeniax_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa xaeniax
 
--- /dev/null
+++ u-boot-1.1.2/board/mnci/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2005
+# M&N Solutions GmbH, Rosbach, Germany, Holger Schurig
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = lib$(BOARD).a
+
+OBJS   := mnci.o
+SOBJS  := memsetup.o
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS
+
+distclean: clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+	$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+++ u-boot-1.1.2/board/mnci/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xa1fe0000
--- /dev/null
+++ u-boot-1.1.2/board/mnci/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/pxa/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
--- /dev/null
+++ u-boot-1.1.2/board/mnci/mnci.c
@@ -0,0 +1,174 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/mach-types.h>
+
+/**
+ * board_init: - setup some data structures
+ *
+ * @return: 0 in case of success
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+	/* so we do _nothing_ here */
+
+	gd->bd->bi_arch_number = MACH_TYPE_RAMSES;
+	gd->bd->bi_boot_params = 0xa0000100;
+#if 0
+	gd->bd->bi_baudrate = 115200;
+#endif
+
+#if 0
+	CKEN |= CKEN2_AC97;
+	GCR = GCR_COLD_RST;
+#endif
+
+	return 0;
+}
+
+
+int board_late_init(void)
+{
+	setenv("stdout", "serial");
+	setenv("stderr", "serial");
+	return 0;
+}
+
+
+/**
+ * dram_init: - setup dynamic RAM
+ *
+ * @return: 0 in case of success
+ */
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+
+
+#ifdef CFG_JFFS_CUSTOM_PART
+
+#include <jffs2/jffs2.h>
+
+#define FLASH_DEBUG 1
+
+/* Some debug macros */
+#if (FLASH_DEBUG > 2 )
+#define PRINTK3(args...) printf(args)
+#else
+#define PRINTK3(args...)
+#endif
+
+#if FLASH_DEBUG > 1
+#define PRINTK2(args...) printf(args)
+#else
+#define PRINTK2(args...)
+#endif
+
+#ifdef FLASH_DEBUG
+#define PRINTK(args...) printf(args)
+#else
+#define PRINTK(args...)
+#endif
+
+
+#define FLASH_BANK_SIZE 0x02000000	/* 32 MB (during development)       */
+#define MAIN_SECT_SIZE  0x00040000	/* 256k per sector                  */
+
+#ifndef CFG_FLASH_CFI
+flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+#endif
+
+static struct part_info part;
+static int current_part = -1;
+
+struct part_info* jffs2_part_info(int part_num) {
+	void *jffs2_priv_saved = part.jffs2_priv;
+
+	PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
+
+	if (current_part == part_num)
+		return &part;
+
+	/* u-boot partition */
+	if(part_num==0){
+		memset(&part, 0, sizeof(part));
+
+		part.offset=(char*)0x00000000;
+		part.size=0x00040000;
+
+		/* Mark the struct as ready */
+		current_part = part_num;
+
+		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
+	}
+
+	/* primary Kernel partition */
+	if(part_num==1){
+		memset(&part, 0, sizeof(part));
+
+		part.offset=(char*)0x00040000;
+		part.size=0x00040000*4;
+
+		/* Mark the struct as ready */
+		current_part = part_num;
+
+		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
+	}
+
+	/* data partition */
+	if(part_num==3){
+		memset(&part, 0, sizeof(part));
+
+		part.offset=(char*)0x00140000;
+		part.size=FLASH_BANK_SIZE-0x00140000;
+
+		/* Mark the struct as ready */
+		current_part = part_num;
+
+		PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
+		PRINTK("part.size   = 0x%08x\n",(unsigned int)part.size);
+	}
+
+	if (current_part == part_num) {
+		part.usr_priv = &current_part;
+		part.jffs2_priv = jffs2_priv_saved;
+		return &part;
+	}
+
+	PRINTK("jffs2_part_info: end of partition table\n");
+	return 0;
+}
+#endif
--- /dev/null
+++ u-boot-1.1.2/include/configs/mnci.h
@@ -0,0 +1,309 @@
+/*
+ * (C) Copyright 2005
+ * Holger Schurig, M&N Solutions GmbH, Rosbach, Germany
+ *
+ * Configuration for the Auerswald Innokom CPU board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/pxa-regs.h>
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL			/* undef for developing */
+
+/*
+ * define the following to enable debug blinks.  A debug blink function
+ * must be defined in memsetup.S
+ */
+#undef DEBUG_BLINK_ENABLE	
+#undef DEBUG_BLINKC_ENABLE	
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
+
+#undef CONFIG_LCD
+#ifdef CONFIG_LCD
+#define CONFIG_SHARP_LM8V31
+#endif
+
+#define CONFIG_MMC		1
+#define BOARD_LATE_INIT		1
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * MNCI memory map information
+ */
+
+#define MNCI_CS5_ETH_OFFSET	0x03400000
+
+
+/*
+ * Hardware drivers
+ */
+#if 0
+#define CONFIG_DRIVER_SMC91111		
+#define CONFIG_SMC91111_BASE	(PXA_CS5_PHYS + MNCI_CS5_ETH_OFFSET + 0x300)	
+#define CONFIG_SMC_USE_32_BIT	1
+//#define CONFIG_SMC_USE_IOFUNCS
+#endif
+
+/* the following has to be set high -- suspect something is wrong with
+ * with the tftp timeout routines. FIXME!!!
+ */
+#define CONFIG_NET_RETRY_COUNT	100
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART	       1       /* we use FFUART on MNCI */
+
+/* allow to overwrite serial and ethaddr */
+//#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_COMMANDS ( 0			\
+			| CFG_CMD_ENV		\
+			| CFG_CMD_FLASH		\
+			| CFG_CMD_LINUX		\
+			| CFG_CMD_JFFS2		\
+			| CFG_CMD_LOADB		\
+			| CFG_CMD_MEMORY	\
+			| CFG_CMD_MISC		\
+			| CFG_CMD_RUN		\
+			)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	0
+#define CONFIG_BOOTCOMMAND	"linux"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 rootfstype=jffs2 root=/dev/mtdblock2"
+//#define CONFIG_BOOTARGS	"console=ttyS0,115200 root=/dev/nfsroot ip=192.168.233.14:192.168.233.1:192.168.233.1:255.255.255.0:ramses2:eth0:off"
+#define CONFIG_CMDLINE_TAG	1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CFG_CONSOLE_INFO_QUIET  1
+#define CFG_JFFS_SINGLE_PART	1
+
+/* 
+ * Current memory map for MNCI supplied Linux images:
+ * 
+ * Flash: 
+ * 0x00000  - 0x003ffff: bootloader
+ * 0x040000 - 0x013ffff: kernel
+ * 0x140000 - 0x1ffffff: file system
+ * 
+ * RAM:
+ * 0xa0008000 - kernel is loaded
+ * 0xa1fe0000 - Uboot runs (48MB into RAM)
+ *
+ */
+
+#define MY_CONFIG_EXTRA_ENV_SETTINGS					\
+	"prog_boot_mmc="						\
+			"mw.b 0xa0000000 0xff 0x40000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0000000 u-boot.bin; "	\
+			"then "						\
+				"protect off 0x0 0x3ffff; "		\
+				"erase 0x0 0x3ffff; "			\
+				"cp.b 0xa0000000 0x0 0x40000; "		\
+				"reset;"				\
+			"fi\0"						\
+	"prog_uImage_mmc="						\
+			"mw.b 0xa0000000 0xff 0x1C0000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0000000 uImage; "	\
+			"then "						\
+				"protect off 0x40000 0x13ffff; "		\
+				"erase 0x40000 0x13ffff; "		\
+				"cp.b 0xa0000000 0x40000 0x1C0000; "	\
+			"fi\0"						\
+	"prog_jffs_mmc="						\
+			"mw.b 0xa0000000 0xff 0x1e00000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0000000 root.jffs; "	\
+			"then "						\
+				"protect off 0x200000 0x13fffff; "	\
+				"erase 0x200000 0x13fffff; "		\
+				"cp.b 0xa0000000 0x200000 0x1e00000; "	\
+			"fi\0"						\
+	"boot_mmc="							\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa1000000 uImage && "	\
+			"then "						\
+				"bootm 0xa1000000; "			\
+			"fi\0"						\
+	"prog_boot_net="						\
+			"mw.b 0xa0000000 0xff 0x100000; "		\
+			"if	 bootp 0xa0000000 u-boot.bin; "		\
+			"then "						\
+				"protect off 0x0 0x3ffff; "		\
+				"erase 0x0 0x3ffff; "			\
+				"cp.b 0xa0000000 0x0 0x40000; "		\
+				"reset; "				\
+			"fi\0"						\
+	"prog_uImage_net="						\
+			"mw.b 0xa0000000 0xff 0x1C0000; "		\
+			"if	 bootp 0xa0000000 uImage; "		\
+			"then "						\
+				"protect off 0x40000 0x13ffff; "		\
+				"erase 0x40000 0x13ffff; "		\
+				"cp.b 0xa0000000 0x40000 0x1C0000; "	\
+			"fi\0"						\
+	"boot_uImage_net="						\
+			"mw.b 0xa0000000 0xff 0x1C0000; "		\
+			"if	 bootp 0xa0000000 uImage; "		\
+			"then "						\
+				 "bootm 0xa0000000; "			\
+			"fi\0"						\
+	"prog_jffs_net="						\
+			"mw.b 0xa0000000 0xff 0x1e00000; "		\
+			"if	 bootp 0xa0000000 root.jffs; "		\
+			"then "						\
+				"protect off 0x200000 0x13fffff; "	\
+				"erase 0x200000 0x13fffff; "		\
+				"cp.b 0xa0000000 0x200000 0x1e00000; "	\
+			"fi\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"bootargsnfs=console=ttyS0,115200 root=/dev/nfsroot ip=192.168.233.14:192.168.233.1:192.168.233.1:255.255.255.0:ramses2:eth0:off;\0" \
+	"boot_nfs="							\
+			"set bootargs $bootargsnfs; "			\
+			"linux\0"
+			
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+//#define CFG_HUSH_PARSER		1
+//#define CFG_PROMPT_HUSH_PS2	"> "
+
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"mnci> "	/* Monitor Command Prompt */
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_DEVICE_NULLDEV	1
+
+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		0x40000		/* default load address */
+
+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
+
+//#define RTC	1				/* enable 32KHz osc */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_MMC_BASE		0xF0000000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+
+/*
+ * Environment
+ */
+#define CFG_MONITOR_BASE	0
+#define CFG_MONITOR_LEN		0x40000
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		0x20000
+#define CFG_ENV_SIZE		0x4000
+#define	CFG_ENV_SECT_SIZE	0x40000
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x08000000 /* 64 MB */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2		0x02000000 /* Flash Bank #2 */
+#define PHYS_FLASH_SIZE		0x02000000 /* 32 MB */
+//#define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
+//#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */
+
+#define CFG_DRAM_BASE		PHYS_SDRAM_1
+#define CFG_DRAM_SIZE		PHYS_SDRAM_1_SIZE
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+
+/*
+ * JFFS2 Partitions
+ */
+#define CFG_JFFS_CUSTOM_PART	1		/* see board/innokom/flash.c */
+
+
+/*
+ * FLASH organization
+ */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER	1
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */
+
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+
+
+#endif	/* __CONFIG_H */
--- /dev/null
+++ u-boot-1.1.2/board/mnci/memsetup.S
@@ -0,0 +1,359 @@
+/*
+ * Memory & peripheral setup of the XScale PXA250
+ *
+ * Written October 2002 by H.Schurig for M&N Logistik-Lösungen Online GmbH
+ * http://www.mn-logistik.de/unsupported/pxa250/
+ *
+ * Number in Parentheses like (3-29) refer to pages in the
+ *
+ *     Intel PXA250 and PXA210
+ *     Application Processor
+ *     Developer's Manual
+ *     February 2002
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+
+/**********************************************************************
+ *
+ * reginit
+ *
+ * PURPOSE:   initialize stuff using a addr/data pair table
+ * PARAMS:    r0 - address the the table
+ * REGISTERS: r0, r1, r2, r3
+ * CALLS:     Nothing
+ * RETURNS:   Nothing
+ **********************************************************************/
+reginit:
+1:	ldmia	r0!, {r1,r2}			@ load reg/value from regtable
+	cmp	r1, #0				@ at end?
+	strne	r2, [r1]			@ if not, store value into reg
+	ldrne	r3, [r1]			@ if not, read it back (see PXA errata)
+	bne	1b				@ if not, branch back
+	mov	pc, lr
+
+
+/**********************************************************************
+ *
+ * memsetup
+ *
+ * PURPOSE:
+ * PARAMS:
+ * REGISTERS:
+ * CALLS:     
+ * RETURNS:   Nothing
+ **********************************************************************/
+
+.globl memsetup
+memsetup:
+	mov	r11, lr
+
+	adr	r0, SystemUnitTable
+	bl	reginit
+
+	@ Steps 2a..4d
+	adr	r0,MemTable1
+	bl	reginit
+
+	@ Step 4e wait 200 usec
+	ldr	r0, oscr_addr
+	ldr	r1, [r0]
+	add	r1,r1,#0x300			@ Current OSCR+0x300
+1:
+	ldr	r2, [r0]
+	cmp	r1, r2
+	bgt	1b
+	
+	@ TODO: data cache must be off, see Developers Manual, Section 6.12,
+	@ page 6-77, point 6.
+
+	@ Step 4f attempt read access to trigger a number of refresh cycles
+	ldr     r2, =CFG_DRAM_BASE
+.rept 8
+	str	r2, [r2]
+.endr
+
+	@ TODO: re-enable data cache
+
+	@ Steps 4g..4h
+	adr	r0,MemTable2
+	bl	reginit
+	@ Done with memory setup
+
+
+	@ Check if we return from Sleep Mode via RCSR (3-33)
+	ldr	r0, rcsr_addr
+	ldr	r1, [r0]
+	and	r1,r1,#0xf			@ mask RCSR_HWR|RCSR_WDR|RCSR_SMR|RCSR_GPR
+	str	r1, [r0]			@ clear Reset Controll State Register
+	teq	r1, #4				@ RCSR_SMR (Sleep Mode)
+	beq	WakeUp
+
+	@ Issue Frequency Change Sequence
+freqchange:
+	mov	r0, #3
+	mcr	p14, 0, r0, c6, c0, 0
+	mov	pc, r11
+
+WakeUp:
+	@ retrieve the scratchpad value and jump to that address
+	ldr	r0, pspr_addr
+	ldr	pc, [r0]
+
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+	
+SystemUnitTable:
+	@ (4-22) Mask all interrupts
+	.long	ICMR,	0x00000000		@ PM
+	@ (4-22) Interrupts are IRQs, not FIQs
+	.long	ICLR,	0x00000000
+	@ (4-23) Only enabled and unmasked interrupts bring the CPU out of idle mode
+	.long	ICCR,	0x00000001
+	@ (4-41) Clear OS Timer Match bits
+	.long	OSSR,	0x0000000f		@ NO PM
+	@ (3-34) Set clock register (we change CP14,6 at the end of this function)
+	.long	CCCR,	0x00000161		@ NO PM, 121 is slow, 241 is medium, 161 is fast
+	@ (3-38) Enable 32 kHz Oszillator
+	.long	OSCC,	0x00000002
+
+	@ (3-36) Enable needed clocks
+	.long	CKEN,	0x00000043		@ PM: FFUART, PWM0, PWM1
+
+	.long	0x17c00004,8			@ CPLD: PER_PWR_EN
+
+// Bit       GPIO  Level  Function     Direct  Altern Function
+// --------------------------------------------------
+// 00000001  0     1      nc           Input   0 normal GPIO
+// 00000002  1     1      nPFI         Input   0 normal GPIO
+// 00000004  2     1      BAT_DATA     Input   0 normal GPIO
+// 00000008  3     1      IRQ_KEY      Input   0 normal GPIO
+// 00000010  4     0      IRQ_ETH      Input   0 normal GPIO
+// 00000020  5     1      nc           Input   0 normal GPIO
+// 00000040  6     0      MMC_CLK      Output  1 MMC_CLK
+// 00000080  7     1      IRQ_GSM      Input   0 normal GPIO
+// 00000100  8     1      nPCC_S1_CD   Input   0 normal GPIO
+// 00000200  9     1      nMMC_CD      Input   0 normal GPIO
+// 00000400  10    1      IRQ_RTC      Input   0 normal GPIO
+// 00000800  11    0      nc 3M6       Output  1 3.6 MHz
+// 00001000  12    1      nc           Input   0 normal GPIO
+// 00002000  13    1      IRQ_DOCK     Input   0 normal GPIO
+// 00004000  14    1      nc           Input   0 normal GPIO
+// 00008000  15    1      nc nCS1      Output  2 nCS1
+
+// 00010000  16    1      PWM0         Output  2 PWM0
+// 00020000  17    1      PWM1         Output  2 PWM1
+// 00040000  18    1      RDY          Input   1 RDY
+// 00080000  19    1      nPCC_S0_IRQ  Input   0 normal GPIO
+// 00100000  20    1      nc           Input   0 normal GPIO
+// 00200000  21    1      AC97_IRQ     Input   0 normal GPIO
+// 00400000  22    1      nPCC_S1_IRQ  Input   0 normal GPIO
+// 00800000  23    1      nc IRQ_GSM   Input   0 normal GPIO
+// 01000000  24    0      UART_INTB    Input   0 normal GPIO
+// 02000000  25    0      UART_INTC    Input   0 normal GPIO
+// 04000000  26    1      UART_INTD    Input   0 normal GPIO
+// 08000000  27    0      nc cpldfree  Input   0 normal GPIO
+// 10000000  28    1      AUD_BITCLK   Input   1 97_BITCLK
+// 20000000  29    0      AUD_SDIN0    Input   1 97_SDATAIN0
+// 40000000  30    0      AUD_SDOUT    Output  2 97_SDATAOUT
+// 80000000  31    0      AUD_SYNC     Output  2 97_SYNC
+
+	.long	GPSR0,	0x00008000		@ set nCS1
+	.long	GPDR0,	0xd0038840		@ out MMC_CLK, 3M6, nCS1, PWM0, PWM1
+	.long	GAFR0_L,0x80401000		@ MMC_CLK:1, 3M6:1, nCS1:2
+	.long	GAFR0_U,0xA500001a		@ PWM0:2, PWM1:2, RDY:1
+						@ 97_BITCLK:1, 97_SDATAIN0:1, 97_SDATAOUT:2, 97_SYNC:2
+	.long	PGSR0,	0x00028000		@ sleep set: nCS1, PWM1
+	.long	GRER0,	0x00000000		@ rising edge detect: none
+	.long	GFER0,	0x00000000		@ falling edge detect: none
+
+
+// 00000001  32    0      USB_INT      Input   0 normal GPIO
+// 00000002  33    1      nCS5         Output  2 nCS5
+// 00000004  34    1      FF_RXD       Input   1 FF_RXD
+// 00000008  35    1      FF_CTS       Input   1 FF_CTS
+// 00000010  36    1      FF_DCD       Input   1 FF_DCD
+// 00000020  37    1      FF_DSR       Input   1 FF_DSR
+// 00000040  38    1      FF_RI        Input   1 FF_RI
+// 00000080  39    0      FF_TXD       Output  2 FF_TXD
+// 00000100  40    0      FF_DTR       Output  2 FF_DTR
+// 00000200  41    0      FF_RTS       Output  2 FF_RTS
+// 00000400  42    1      BT_RXD       Input   1 BT_RXD
+// 00000800  43    1      BT_TXD       Output  2 BT_TXD
+// 00001000  44    0      BT_CTS       Input   1 BT_CTS
+// 00002000  45    1      BT_RTS       Output  2 BT_RTS
+// 00004000  46    1      IR_RXD       Input   1 ICP_RXD
+// 00008000  47    0      IR_TXD       Output  2 ICP_TXD
+// 00010000  48    1      nPOE         Output  2 nPOE
+// 00020000  49    1      nPWE         Output  2 nPWE
+// 00040000  50    1      nPIOR        Output  2 nPIOR
+// 00080000  51    1      nPIOW        Output  2 nPIOW
+// 00100000  52    1      nPCE1        Output  2 nPCE1
+// 00200000  53    1      nPCE2        Output  2 nPCE2
+// 00400000  54    0      nPKTSEL      Output  2 nPKTSEL
+// 00800000  55    1      nPREG        Output  2 nPREG
+// 01000000  56    1      nPWAIT       Input   1 nPWAIT
+// 02000000  57    1      nIOIS16      Input   1 nIOI16
+// 04000000  58    0      LDD0         Output  2 LDD0
+// 08000000  59    1      LDD1         Output  2 LDD1
+// 10000000  60    0      LDD2         Output  2 LDD2
+// 20000000  61    1      LDD3         Output  2 LDD3
+// 40000000  62    0      LDD4         Output  2 LDD4
+// 80000000  63    0      LDD5         Output  2 LDD5
+
+	.long	GPSR1,	0x00020302		@ set nCS5, FF_RTS, FF_DTR, nPWE
+	.long	GPCR1,	0x00000080		@ clear FF_TXD
+	.long	GPDR1,	0xfcffab82		@ out: nCS5, FF_TXD, FF_DTR, FF_RTS, BT_TXD,
+						@      BT_RTS, IR_TXD, nPOE...nPREG, LDD0..LDD5
+	.long	GAFR1_L,0x999a9558		@
+	.long	GAFR1_U,0xaaa5aaaa		@
+	.long	PGSR1,	0x00020002		@ sleep set: nCS5, nPWE
+	.long	GRER1,	0x00000000		@
+	.long	GFER1,	0x00000000		@
+
+
+
+// 00000001  64    0      LDD6         Output  2 LDD6
+// 00000002  65    1      LDD7         Output  2 LDD7
+// 00000004  66    1      LDD8         Output  2 LDD8
+// 00000008  67    0      LDD9         Output  2 LDD9
+// 00000010  68    1      LDD10        Output  2 LDD10
+// 00000020  69    0      LDD11        Output  2 LDD11
+// 00000040  70    0      LDD12        Output  2 LDD12
+// 00000080  71    1      LDD13        Output  2 LDD13
+// 00000100  72    0      LDD14        Output  2 LDD14
+// 00000200  73    0      LDD15        Output  2 LDD15
+// 00000400  74    1      FCLK         Output  2 FCLK
+// 00000800  75    1      LCLK         Output  2 LCLK
+// 00001000  76    1      PCLK         Output  2 PCLK
+// 00002000  77    0      BIAS         Output  2 ACBIAS
+// 00004000  78    1      nCS2         Output  2 nCS2
+// 00008000  79    1      nCS3         Output  2 nCS3
+// 00010000  80    1      nCS4         Output  2 nCS4
+// 00020000  81    1      nc           Input   0 normal GPIO
+// 00040000  82    1      nc           Input   0 normal GPIO
+// 00080000  83    1      nc           Input   0 normal GPIO
+// 00100000  84    1      nc           Input   0 normal GPIO
+
+	.long	GPSR2,	0x0001c000		@ set nCS2..4
+	.long	GPDR2,	0x0001FFFF		@ out: LDD6..nCS4
+	.long	GAFR2_L,0xaaaaaaaa		@
+	.long	GAFR2_U,0x00000002		@
+	.long	PGSR2,	0x0001c000		@ sleep set: nCS2..4
+	.long	GRER2,	0x00000000		@
+	.long	GFER2,	0x00000000		@
+
+	@ (3-25) Power Wakeup Registers
+	.long	PWER,	0x00000008		@ wake up on IRQ_KEY
+	.long	PRER,	0x00000008		@ detect rising edge on IRQ_KEY
+	.long	PFER,	0x00000000		@ dont detect falling edges
+
+	@ (3-28) Power Manager Edge Detect Status Register
+	.long	PEDR,	0x00000008		@ clear edge detect status for IRQ_KEY
+
+	@ (3-29) Sleep State Register
+	.long	PSSR,	0x00000030		@ clear PH and RDH
+
+	.long	PWM_CTRL0,     0
+	.long	PWM_CTRL0,     0
+	.long	PWM_PERVAL0, 512
+	.long	PWM_PERVAL1, 512
+	.long	PWM_PWDUTY0, 440
+	.long	PWM_PWDUTY1, 450
+
+	@ End
+	.long	0,0
+
+
+
+
+MemTable1:
+	@ Info on this sequence is in the OS Developers Guide, Section 10.0 on page 13
+	@ also see Developers Manual, Section 6.12 on page 6-76
+
+	@ write MSC0, MSC1, MSC2 (6-44)
+	.long	MSC0,	0x7ff0fdc3		@ f4c0
+	.long	MSC1,	0x29842981
+	.long	MSC2,	0x29842984
+
+	@ no synchronous static stuff here
+	.long	SXCNFG,	0x00000000		@ (6-31)
+
+	@ write MECR (6-60), MCMEMx (6-57), MCATTx (6-58), MCIOx (6-58)
+	.long	MECR,	0x00000003
+	.long	MCMEM0,	0x00020418
+	.long	MCMEM1,	0x00020418
+	.long	MCATT0,	0x0002449D
+	.long	MCATT1,	0x0002449D
+	.long	MCIO0,	0x00014290
+	.long	MCIO1,	0x00014290
+
+	@ write FLYCNFG (that register is now undocumented)
+
+	@ OS Developers Manual: write MDREFR (6-15), K0RUN and K0PIN are
+	@ 	set for synchronous static memory. The desired value of
+	@ 	K0DB2 can be programmed. KxFREE can be deasserted. APD must
+	@ 	remain deasserted and SLFRSH must remain asserted.
+	@ Developers Manual: write K0RUN and E0PIN. Configure K0DB2. Retain
+	@	the current values of APD and SLFRSH. DRI must contain a
+	@	valid value. Deassert KxFREE.
+	.long	MDREFR,	0x00400016		@ 2d KxFREE & APD deasserted, SLFRSH asserted
+
+	@ Developers Manual: in systems containing Synchronous Static Memory, write
+	@ to SXCNFG, including the enable bits.
+	@.long	SXCNFG,	0x00000000		@ no Synchronous Static Memory
+
+	@ Assert K1RUN and K2RUN and configure K1DB2 and K2DB2
+	.long	MDREFR,	0x00450016		@ 4a
+	.long	MDREFR,	0x00050016		@ 4b deassert SLFRFH
+	.long	MDREFR,	0x00058016		@ 4c assert E1PIN
+	.long	MDCNFG,	0x0A000AC8		@ 4d without DE0/DE1 (6-10)
+	.long	0,0
+
+oscr_addr:
+	.long	OSCR
+rcsr_addr:
+	.long	RCSR
+pspr_addr:
+	.long	PSPR
+
+
+@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+
+	
+MemTable2:
+	.long	MDCNFG,	0x0A000ACB		@ 4d with DE0/DE1
+	.long	MDMRS,  0x00000000		@ 4h
+	.long	MDREFR, 0x00118016		@ 5 (optional) turn APD on
+	.long	0x17C0002C, 0x00000011		@ MNCI: enable FFUART driver
+	.long	0x17c00034, 0x00000000		@ MNCI: enable flash write
+	.long	0x17c00028, 0x00000000		@ MNCI: turn off CF-Card enable
+	.long	0x17c00014, 0x00000000		@ MNCI: turn off CF-Card power
+ 	.long	0x10000000, 0x0000d803		@ MNCI: disable all LEDs, SCANNER_WAKE & SCANNER_TRIG on
+@ 	.long	0x10000000, 0x0000d80b		@ MNCI: disable all LEDs, SCANNER_WAKE, SCANNER_TRIG & UARTB on
+	.long	0,0