path: root/packages/u-boot/u-boot-1.3.2/boc01/007-090217-CAPSENSE.patch

Index: u-boot-1.3.2/common/cmd_capsense.c
===================================================================
--- /dev/null
+++ u-boot-1.3.2/common/cmd_capsense.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2008
+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CapSense Express touch-sensing buttons
+ */
+
+#include <common.h>
+#include <config.h>
+#include <command.h>
+
+#include <capsense.h>
+#include <i2c.h>
+
+#define ARG_SENSOR_NUMBER	1
+
+#define ARG_CMD		1
+#define ARG_OLD_ADDRESS	2
+
+
+int do_capsense (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	unsigned char sensors[] = CONFIG_CAPSENSE_SENSORS;
+	int old_bus, old_address;
+	char port[2];
+	/* switch to correct I2C bus */
+	old_bus = I2C_GET_BUS();
+	I2C_SET_BUS(CFG_CAPSENSE_BUS_NUM);
+
+	/*
+	 * Loop through sensors, read
+	 * state, and output it.
+	 */
+	if(argc==1)
+	{
+		port[0]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,0);
+		port[1]=capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1);
+		capsense_get_state(CONFIG_CAPSENSE_I2C_ADDRESS,1);
+		printf ("P0 0x%02x 0x%02x\n",port[0],port[1]);
+		for (i = 0; i < 8; i++)
+		{
+			if(sensors[0]&(1<<i))
+			{
+				printf ("GP0[%d]: %i\n",i,port[0]&(1<<i)?1:0);
+			}
+			if(sensors[1]&(1<<i))
+			{
+				printf ("GP1[%d]: %i\n",i,port[1]&(1<<i)?1:0);
+			}
+
+		}
+	}
+	else
+	{
+		if ( strncmp(argv[ARG_CMD], "config", 3) == 0 ) {
+			if ( argc == 3 ) {
+				old_address=simple_strtoul (argv[ARG_OLD_ADDRESS], NULL, 10);
+				if ( capsense_change_i2c_address(old_address, CONFIG_CAPSENSE_I2C_ADDRESS) != 0 )
+					printf("failed to change i2c address\n");
+				else
+					printf("i2c address changed to 0x%02X\n", CONFIG_CAPSENSE_I2C_ADDRESS);
+			}
+
+			capsense_config(CONFIG_CAPSENSE_I2C_ADDRESS);
+			capsense_store_nvm(CONFIG_CAPSENSE_I2C_ADDRESS);
+		}
+		else {
+			printf ("Usage:\n%s\n", cmdtp->help);
+		}
+	}
+
+	/* switch back to original I2C bus */
+	I2C_SET_BUS(old_bus);
+
+	return 0;
+}	/* do_capsense() */
+
+
+/***************************************************/
+
+U_BOOT_CMD(
+	  capsense,	4,	1,	do_capsense,
+	  "capsense - CapSense Express touch-sensing buttons\n",
+	  "capsense\n  Read state of the CapSense Express touch-sensing buttons.\n"
+	  "capsense config [<old i2c address>]\n  Setup default capsense configuration.\n"
+	  );
Index: u-boot-1.3.2/common/Makefile
===================================================================
--- u-boot-1.3.2.orig/common/Makefile
+++ u-boot-1.3.2/common/Makefile
@@ -50,6 +50,7 @@ endif
 COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o
 COBJS-$(CONFIG_CMD_DOC) += cmd_doc.o
 COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o
+COBJS-$(CONFIG_CMD_CAPSENSE) += cmd_capsense.o
 COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
 COBJS-y += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
Index: u-boot-1.3.2/drivers/i2c/CY8C201xx.c
===================================================================
--- /dev/null
+++ u-boot-1.3.2/drivers/i2c/CY8C201xx.c
@@ -0,0 +1,289 @@
+/*
+ * (C) Copyright 2008
+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CapSense Express touch-sensing buttons
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_CAPSENSE_CY8C201XX
+
+#include <i2c.h>
+#include <capsense.h>
+
+int capsense_read(int address, int reg)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Validate 'reg' param
+	 */
+	if ( (reg < 0) || (reg > 0xA1) )
+		return -1;
+
+	/*
+	 * Prepare to handle 1 byte result.
+	 */
+	dlen = 1;
+
+	/*
+	 * Now try to read the register.
+	 */
+	if (i2c_read(address, reg, 1, data, dlen) != 0)
+		return -1;
+
+	return (int)data[0];
+}
+
+
+int capsense_write(int address, int reg, int val)
+{
+	int dlen;
+	uchar data[2];
+
+	/*
+	 * Validate 'reg' param
+	 */
+	if((reg < 0) || (reg > 0xA1))
+		return -1;
+
+	/*
+	 * Handle 1 byte values.
+	 */
+ 	dlen = 1;
+	data[0] = (char)(val & 0xff);
+
+	/*
+	 * Write value to register.
+	 */
+	if (i2c_write(address, reg, 1, data, dlen) != 0)
+		return 1;
+
+	return 0;
+}
+
+
+int capsense_write_N(int address, int reg,  char *data, int dlen)
+{
+	/*
+	 * Validate 'reg' param
+	 */
+	if ( (reg < 0) || (reg > 0xA1) )
+		return -1;
+
+	/*
+	 * Write value to register.
+	 */
+	if ( i2c_write(address, reg, 1, data, dlen) != 0 )
+		return 1;
+
+	return 0;
+}
+
+
+int capsense_get_state(int address,char port)
+{
+	return capsense_read(address,CAPSENSE_REG_READ_STATUS+port);
+}
+
+
+int capsense_change_i2c_address(char old_address,char new_address)
+{
+	unsigned char data[4];
+	int read_address;
+	printf("capsense change i2c address\n");
+	//checking if the I2C address is in the limits ( I2C address can have a value from 0 to 127 )
+	if((old_address>0x7F)||(new_address>0x7F))
+	{
+		printf("I2C address is not in the limits\n");
+		return 1;
+	}
+
+	//reading old capsence address
+	read_address=capsense_read(old_address, CAPSENSE_REG_I2C_ADDR_DM);
+	if(read_address==0xFFFFFFFF)
+	{
+		printf("error reading old capsence address\n");
+		return 1;	//capsense do not respond at new address
+	}
+
+	if((read_address&0x7F)!=old_address)
+	{
+		printf("reading old capsence address failed\n");
+		return 1;	//Capsense not respond correctly
+	}
+
+	//writing command for unlocking the I2C device address lock
+	data[0]=0x3C;
+	data[1]=0xA5;
+	data[2]=0x69;
+	if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0)
+	{
+		printf("writing command for unlocking the I2C device address lock failed\n");
+		return 1;
+	}
+
+	//writing the new I2C address to the device I2C address register
+	if(capsense_write(old_address, CAPSENSE_REG_I2C_ADDR_DM,new_address|0x80)!=0)
+	{
+		printf("writing the new I2C address to the device I2C address register failed\n");
+		return 1;
+	}
+
+	//writing command for locking the I2C device address lock
+	data[0]=0x96;
+	data[1]=0x5A;
+	data[2]=0xC3;
+	if(capsense_write_N(old_address, CAPSENSE_REG_I2C_DEV_LOCK, data , 3)!=0)
+	{
+		printf("writing command for locking the I2C device failed\n");
+		return 1;
+	}
+
+	//reading new capsence address
+	read_address=capsense_read(new_address, CAPSENSE_REG_I2C_ADDR_DM);
+	if(read_address==0xFFFFFFFF)
+	{
+		printf("capsense do not respond at new address\n");
+		return 1;	//capsense do not respond at new address
+	}
+
+	return 0;
+}
+
+
+static char data_GPIO_ENABLE[] = {
+	0x00, 0x00   // GPIO_ENABLE
+};
+
+static char data_CS_ENABLE[] = {
+	0x1D, 0x10,  // CS_ENABLE
+	0x02, 0x0F,  // GPIO_ENABLE
+	0x00, 0x00,  // INVERSION_MASK
+	0x00, 0x00,  // INT_MASK
+	0x1F, 0x1F,  // STATUS_HOLD_MSK
+	0x00, 0x02, 0x00, 0x00,  // DM_PULL_UP0, DM_STRONG0, DM_HIGHZ0, DM_OD_LOW0
+	0x00, 0x0F, 0x00, 0x00,  // DM_PULL_UP1, DM_STRONG1, DM_HIGHZ1, DM_OD_LOW1
+};
+
+static char data_OUTPUT_PORT[] = {
+	0x00, 0x00   // OUTPUT_PORT
+};
+
+static char data_OP_SEL[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_00
+	0x80, 0x01, 0x00, 0x00, 0x00,   // OP_SEL_01
+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_02
+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_03
+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_04
+	0x80, 0x10, 0x00, 0x00, 0x00,   // OP_SEL_10
+	0x80, 0x08, 0x00, 0x00, 0x00,   // OP_SEL_11
+	0x80, 0x04, 0x00, 0x00, 0x00,   // OP_SEL_12
+	0x80, 0x00, 0x10, 0x00, 0x00,   // OP_SEL_13
+	0x00, 0x00, 0x00, 0x00, 0x00,   // OP_SEL_14
+};
+
+static char data_CS_NOISE_TH[] = {
+	0x28,   // CS_NOISE_TH
+	0x64,   // CS_BL_UPD_TH
+	0xA0,   // CS_SETL_TIME
+	0x22,   // CS_OTH_SET
+	0x0A,   // CS_HYSTERESIS
+	0x03,   // CS_DEBOUNCE
+	0x14,   // CS_NEG_NOISE_TH
+	0x14,   // CS_LOW_BL_RST
+	0x00,   // CS_FILTERING
+};
+
+static char data_CS_SCAN_POS[] = {
+	0x00, 0x00, 0x00, 0x00, 0x00,   // CS_SCAN_POS_0x
+	0x00, 0x00, 0x00, 0x00, 0x00,   // CS_SCAN_POS_1x
+	0x32, 0x00, 0x32, 0x32, 0x32,   // CS_FINGER_TH_0x
+	0x00, 0x00, 0x00, 0x00, 0x32,   // CS_FINGER_TH_1x
+	0x14, 0x00, 0x0C, 0x0A, 0x14,   // CS_IDAC_0x
+	0x00, 0x00, 0x00, 0x00, 0x0D    // CS_IDAC_1x
+};
+
+static char data_SLEEP[] = {
+	0x00,   // SLEEP_PIN
+	0x20,   // SLEEP_CTRL
+	0x00,   // SLEEP_SA_CTR
+};
+
+int capsense_config(char address)
+{
+	printf("Setting default capsense configuration at i2c address 0x%02X...\n", address);
+
+	//entering setup operation mode
+	if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_SETUP_OPERATION_MODE) != 0 ) {
+		printf("CAPSENSE_COMMAND_REG SETUP_OPERATION_MODE\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_GPIO_ENABLE, data_GPIO_ENABLE, sizeof(data_GPIO_ENABLE)) != 0 ) {
+		printf("CAPSENSE_REG_GPIO_ENABLE\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_CS_ENABLE, data_CS_ENABLE, sizeof(data_CS_ENABLE)) != 0 ) {
+		printf("CAPSENSE_REG_CS_ENABLE\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_OUTPUT_PORT, data_OUTPUT_PORT, sizeof(data_OUTPUT_PORT)) != 0 ) {
+		printf("CAPSENSE_REG_OUTPUT_PORT\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_OP_SEL_0, data_OP_SEL, sizeof(data_OP_SEL)) != 0 ) {
+		printf("CAPSENSE_REG_OP_SEL_0\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_CS_NOISE_TH, data_CS_NOISE_TH, sizeof(data_CS_NOISE_TH)) != 0 ) {
+		printf("CAPSENSE_REG_CS_NOISE_TH\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_CS_SCAN_POS, data_CS_SCAN_POS, sizeof(data_CS_SCAN_POS)) != 0 ) {
+		printf("CAPSENSE_REG_CS_SCAN_POS\n");
+		return 1;
+   	}
+	if ( capsense_write_N(address, CAPSENSE_REG_SLEEP_PIN, data_SLEEP, sizeof(data_SLEEP)) != 0 ) {
+		printf("CAPSENSE_REG_SLEEP_PIN\n");
+		return 1;
+   	}
+	if ( capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_NORMAL_OPERATION_MODE) != 0 ) {
+		printf("CAPSENSE_COMMAND_REG NORMAL_OPERATION_MODE\n");
+		return 1;
+   	}
+
+	printf("...done.\n");
+
+	return 0;
+}
+
+void capsense_store_nvm(char address)
+{
+	//storing the new current configuration to NVM
+	printf("Storing capsense configuration to NVM\n");
+	capsense_write(address, CAPSENSE_COMMAND_REG, CAPSENSE_CMD_STORE_TO_NVM);
+}
+
+#endif /* CONFIG_CAPSENSE_CY8C201XX */
Index: u-boot-1.3.2/drivers/i2c/Makefile
===================================================================
--- u-boot-1.3.2.orig/drivers/i2c/Makefile
+++ u-boot-1.3.2/drivers/i2c/Makefile
@@ -29,6 +29,7 @@ COBJS-y += fsl_i2c.o
 COBJS-y += omap1510_i2c.o
 COBJS-y += omap24xx_i2c.o
 COBJS-y += tsi108_i2c.o
+COBJS-y += CY8C201xx.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
Index: u-boot-1.3.2/include/capsense.h
===================================================================
--- /dev/null
+++ u-boot-1.3.2/include/capsense.h
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2008
+ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USCY8C201xx.c:234:A
+ */
+
+/*
+ * CapSense Express touch-sensing buttons.
+ */
+#ifndef _CAPSENSE_H_
+#define _CAPSENSE_H_
+
+#if defined(CONFIG_CAPSENSE_CY8C201XX)
+
+#define CONFIG_CAPSENSE				/* We have a Capsense */
+
+#ifndef CONFIG_CAPSENSE_SENSORS
+/*config for CY3218-CAPEXP1*/
+#define CONFIG_CAPSENSE_LED				{0x05,0x02} // port 0-{0,3} port 1-{2}
+#define CONFIG_CAPSENSE_SENSOR			{0x02,0x0C} // port 0-{2} port 1-{3,4}
+#endif
+#endif /* CONFIG_CAPSENSE_SENSORS */
+
+extern int capsense_read(int address, int reg);
+extern int capsense_write(int address, int reg, int val);
+extern int capsense_get_state(int address,char port);
+extern int capsense_change_i2c_address(char old_address,char new_address);
+extern int capsense_config(char address);
+extern void capsense_store_nvm(char address);
+#endif
+
+#if !defined(CFG_CAPSENSE_BUS_NUM)
+#define CFG_CAPSENSE_BUS_NUM		1
+
+//-----------------------------------------------
+// Register Map and corresponding constants
+//-----------------------------------------------
+
+
+#define CAPSENSE_REG_STATUS_PORT                          0x02
+#define CAPSENSE_REG_OUTPUT_PORT                          0x04
+#define CAPSENSE_REG_CS_ENABLE                            0x06
+#define CAPSENSE_REG_GPIO_ENABLE                          0x08
+#define CAPSENSE_REG_INVERSION_MASK                       0x0A
+#define CAPSENSE_REG_INT_MASK                             0x0C
+#define CAPSENSE_REG_STATUS_HOLD_MSK                      0x0E
+#define CAPSENSE_REG_DRIVE_MODE                           0x10
+#define CAPSENSE_REG_OP_SEL_0                             0x1C
+#define CAPSENSE_REG_OP_SEL_1                             0x35
+#define CAPSENSE_REG_CS_NOISE_TH                          0x4E
+#define CAPSENSE_REG_CS_SETL_TIME                         0x50
+#define CAPSENSE_REG_CS_OTH_SET                           0x51
+#define CAPSENSE_REG_CS_HYSTERESIS                        0x52
+#define CAPSENSE_REG_CS_DEBOUNCE                          0x53
+#define CAPSENSE_REG_CS_NEG_NOISE_TH                      0x54
+#define CAPSENSE_REG_CS_SCAN_POS			  0x57
+#define CAPSENSE_REG_CS_FINGER_TH                         0x61
+#define CAPSENSE_REG_CS_IDAC                              0x6B
+#define CAPSENSE_REG_CS_SLID_CONFIG                       0x75
+#define CAPSENSE_REG_CS_SLID_MUL                          0x77
+#define CAPSENSE_REG_I2C_DEV_LOCK			  0x79
+#define CAPSENSE_REG_DEVICE_ID                            0x7A
+#define CAPSENSE_REG_I2C_ADDR_DM		          0x7C
+#define CAPSENSE_REG_SLEEP_PIN                            0x7E
+#define CAPSENSE_REG_SLEEP_CTRL                           0x7F
+#define CAPSENSE_REG_SLEEP_SA_CTR                         0x80
+#define CAPSENSE_REG_CS_READ_BUTTON                       0x81
+#define CAPSENSE_REG_CS_READ_BL                           0x82
+#define CAPSENSE_REG_READ_STATUS                          0x88
+#define CAPSENSE_REG_READ_CEN_POS                         0x8A
+
+#define CAPSENSE_COMMAND_REG                              0xA0
+
+#define CAPSENSE_CMD_STORE_TO_NVM                          0x01
+#define CAPSENSE_CMD_NORMAL_OPERATION_MODE                 0x07
+#define CAPSENSE_CMD_SETUP_OPERATION_MODE                  0x08
+
+#endif /* _CAPSENSE_H_ */
Index: u-boot-1.3.2/include/configs/MPC8313ERDB.h
===================================================================
--- u-boot-1.3.2.orig/include/configs/MPC8313ERDB.h
+++ u-boot-1.3.2/include/configs/MPC8313ERDB.h
@@ -407,6 +407,13 @@
 #define CFG_DTT_MAX_TEMP        70
 #define CFG_DTT_MIN_TEMP        -30
 
+/*Capsense touch sensing buttons (Cpe board)*/
+#define CONFIG_CMD_CAPSENSE
+#define CONFIG_CAPSENSE_CY8C201XX		1
+#define CONFIG_CAPSENSE_I2C_ADDRESS		0x25
+#define CONFIG_CAPSENSE_LEDS			{0x02,0x0F} // port 0-{1} port 1-{0,1,2,3}
+#define CONFIG_CAPSENSE_SENSORS			{0x1D,0x10} // port 0-{0,2,3,4} port 1-{4}
+
 /*
  * Miscellaneous configurable options
  */