path: root/packages/u-boot/u-boot-1.1.2/command-names.patch

#
# Patch managed by http://www.holgerschurig.de/patcher.html
#

--- u-boot-1.1.2/common/cmd_mem.c~command-names
+++ u-boot-1.1.2/common/cmd_mem.c
@@ -1188,56 +1188,56 @@
 /**************************************************/
 #if (CONFIG_COMMANDS & CFG_CMD_MEMORY)
 U_BOOT_CMD(
-	md,     3,     1,      do_mem_md,
-	"md      - memory display\n",
+	memdump,     3,     1,      do_mem_md,
+	"memdump - memory display\n",
 	"[.b, .w, .l] address [# of objects]\n    - memory display\n"
 );
 
 
 U_BOOT_CMD(
-	mm,     2,      1,       do_mem_mm,
-	"mm      - memory modify (auto-incrementing)\n",
+	memmod,     2,      1,       do_mem_mm,
+	"memmod  - memory modify (auto-incrementing)\n",
 	"[.b, .w, .l] address\n" "    - memory modify, auto increment address\n"
 );
 
 
 U_BOOT_CMD(
-	nm,     2,	    1,     	do_mem_nm,
-	"nm      - memory modify (constant address)\n",
+	memchg,     2,	    1,     	do_mem_nm,
+	"memchg  - memory modify (constant address)\n",
 	"[.b, .w, .l] address\n    - memory modify, read and keep address\n"
 );
 
 U_BOOT_CMD(
-	mw,    4,    1,     do_mem_mw,
-	"mw      - memory write (fill)\n",
+	memfill,    4,    1,     do_mem_mw,
+	"memfill - fill write\n",
 	"[.b, .w, .l] address value [count]\n    - write memory\n"
 );
 
 U_BOOT_CMD(
-	cp,    4,    1,    do_mem_cp,
-	"cp      - memory copy\n",
+	memcp,    4,    1,    do_mem_cp,
+	"memcp   - copy memory\n",
 	"[.b, .w, .l] source target count\n    - copy memory\n"
 );
 
 U_BOOT_CMD(
-	cmp,    4,     1,     do_mem_cmp,
-	"cmp     - memory compare\n",
+	memcmp,    4,     1,     do_mem_cmp,
+	"memcmp  - compary memory\n",
 	"[.b, .w, .l] addr1 addr2 count\n    - compare memory\n"
 );
 
 #ifndef CONFIG_CRC32_VERIFY
 
 U_BOOT_CMD(
-	crc32,    4,    1,     do_mem_crc,
-	"crc32   - checksum calculation\n",
+	memcrc,    4,    1,     do_mem_crc,
+	"memcrc  - checksum memory\n",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 );
 
 #else	/* CONFIG_CRC32_VERIFY */
 
 U_BOOT_CMD(
-	crc32,    5,    1,     do_mem_crc,
-	"crc32   - checksum calculation\n",
+	memcrc,    5,    1,     do_mem_crc,
+	"memcrc  - checksum memory\n",
 	"address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 	"-v address count crc\n    - verify crc of memory area\n"
 );
@@ -1245,31 +1245,31 @@
 #endif	/* CONFIG_CRC32_VERIFY */
 
 U_BOOT_CMD(
-	base,    2,    1,     do_mem_base,
-	"base    - print or set address offset\n",
+	membase,    2,    1,     do_mem_base,
+	"membase - print/set memory offset\n",
 	"\n    - print address offset for memory commands\n"
-	"base off\n    - set address offset for memory commands to 'off'\n"
+	"[offset]\n    - set address offset for memory commands to 'offset'\n"
 );
 
 U_BOOT_CMD(
-	loop,    3,    1,    do_mem_loop,
-	"loop    - infinite loop on address range\n",
+	memloop,    3,    1,    do_mem_loop,
+	"memloop - infinite loop on address range\n",
 	"[.b, .w, .l] address number_of_objects\n"
 	"    - loop on a set of addresses\n"
 );
 
 #ifdef CONFIG_LOOPW
 U_BOOT_CMD(
-	loopw,    4,    1,    do_mem_loopw,
-	"loopw   - infinite write loop on address range\n",
+	memloopw,    4,    1,    do_mem_loopw,
+	"memloopw- infinite write loop on address range\n",
 	"[.b, .w, .l] address number_of_objects data_to_write\n"
 	"    - loop on a set of addresses\n"
 );
 #endif /* CONFIG_LOOPW */
 
 U_BOOT_CMD(
-	mtest,    4,    1,     do_mem_mtest,
-	"mtest   - simple RAM test\n",
+	memtest,    4,    1,     do_mem_mtest,
+	"memtest - simple RAM test\n",
 	"[start [end [pattern]]]\n"
 	"    - simple RAM read/write test\n"
 );
--- u-boot-1.1.2/common/cmd_flash.c~command-names
+++ u-boot-1.1.2/common/cmd_flash.c
@@ -507,30 +507,30 @@
 );
 
 U_BOOT_CMD(
-	erase,   3,   1,  do_flerase,
-	"erase   - erase FLASH memory\n",
+	flerase,   3,   1,  do_flerase,
+	"flerase - erase FLASH memory\n",
 	"start end\n"
 	"    - erase FLASH from addr 'start' to addr 'end'\n"
-	"erase N:SF[-SL]\n    - erase sectors SF-SL in FLASH bank # N\n"
-	"erase bank N\n    - erase FLASH bank # N\n"
-	"erase all\n    - erase all FLASH banks\n"
+	"flerase N:SF[-SL]\n    - erase sectors SF-SL in FLASH bank # N\n"
+	"flerase bank N\n    - erase FLASH bank # N\n"
+	"flerase all\n    - erase all FLASH banks\n"
 );
 
 U_BOOT_CMD(
-	protect,  4,  1,   do_protect,
-	"protect - enable or disable FLASH write protection\n",
+	flprot,  4,  1,   do_protect,
+	"flprot  - enable or disable FLASH write protection\n",
 	"on  start end\n"
 	"    - protect FLASH from addr 'start' to addr 'end'\n"
-	"protect on  N:SF[-SL]\n"
+	"flprot on  N:SF[-SL]\n"
 	"    - protect sectors SF-SL in FLASH bank # N\n"
-	"protect on  bank N\n    - protect FLASH bank # N\n"
-	"protect on  all\n    - protect all FLASH banks\n"
-	"protect off start end\n"
+	"flprot on  bank N\n    - protect FLASH bank # N\n"
+	"flprot on  all\n    - protect all FLASH banks\n"
+	"flprot off start end\n"
 	"    - make FLASH from addr 'start' to addr 'end' writable\n"
-	"protect off N:SF[-SL]\n"
+	"flprot off N:SF[-SL]\n"
 	"    - make sectors SF-SL writable in FLASH bank # N\n"
-	"protect off bank N\n    - make FLASH bank # N writable\n"
-	"protect off all\n    - make all FLASH banks writable\n"
+	"flprot off bank N\n    - make FLASH bank # N writable\n"
+	"flprot off all\n    - make all FLASH banks writable\n"
 );
 
 #endif	/* CFG_CMD_FLASH */
--- u-boot-1.1.2/common/cmd_bootm.c~command-names
+++ u-boot-1.1.2/common/cmd_bootm.c
@@ -446,8 +446,8 @@
 }
 
 U_BOOT_CMD(
- 	bootm,	CFG_MAXARGS,	1,	do_bootm,
- 	"bootm   - boot application image from memory\n",
+ 	imgboot, CFG_MAXARGS,	1,	do_bootm,
+ 	"imgboot - boot application image from memory\n",
  	"[addr [arg ...]]\n    - boot application image stored in memory\n"
  	"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
  	"\t'arg' can be the address of an initrd image\n"
@@ -1056,8 +1056,8 @@
 }
 
 U_BOOT_CMD(
-	iminfo,	CFG_MAXARGS,	1,	do_iminfo,
-	"iminfo  - print header information for application image\n",
+	imginfo, CFG_MAXARGS,	1,	do_iminfo,
+	"imginfo  - print header information for application image\n",
 	"addr [addr ...]\n"
 	"    - print header information for application image starting at\n"
 	"      address 'addr' in memory; this includes verification of the\n"
@@ -1116,8 +1116,8 @@
 }
 
 U_BOOT_CMD(
-	imls,	1,		1,	do_imls,
-	"imls    - list all images found in flash\n",
+	imgls,	1,		1,	do_imls,
+	"imgls    - list all images found in flash\n",
 	"\n"
 	"    - Prints information about all images found at sector\n"
 	"      boundaries in flash.\n"
--- u-boot-1.1.2/common/cmd_jffs2.c~command-names
+++ u-boot-1.1.2/common/cmd_jffs2.c
@@ -259,8 +259,8 @@
 }
 
 U_BOOT_CMD(
-	chpart,	2,	0,	do_jffs2_chpart,
-	"chpart\t- change active partition\n",
+	jffspart,	2,	0,	do_jffs2_chpart,
+	"jffspart\t- change active partition\n",
 	"    - change active partition\n"
 );
 #endif	/* CFG_JFFS_SINGLE_PART */
@@ -268,22 +268,22 @@
 /***************************************************/
 
 U_BOOT_CMD(
-	fsload,	3,	0,	do_jffs2_fsload,
-	"fsload\t- load binary file from a filesystem image\n",
+	jffsload,	3,	0,	do_jffs2_fsload,
+	"jffsload- load binary file from a filesystem image\n",
 	"[ off ] [ filename ]\n"
 	"    - load binary file from flash bank\n"
 	"      with offset 'off'\n"
 );
 
 U_BOOT_CMD(
-	fsinfo,	1,	1,	do_jffs2_fsinfo,
-	"fsinfo\t- print information about filesystems\n",
+	jffsinfo,	1,	1,	do_jffs2_fsinfo,
+	"jffsinfo- print information about filesystems\n",
 	"    - print information about filesystems\n"
 );
 
 U_BOOT_CMD(
-	ls,	2,	1,	do_jffs2_ls,
-	"ls\t- list files in a directory (default /)\n",
+	jffsls,	2,	1,	do_jffs2_ls,
+	"jffsls\t- list files in a directory (default /)\n",
 	"[ directory ]\n"
 	"    - list files in a directory.\n"
 );
--- u-boot-1.1.2/common/cmd_nvedit.c~command-names
+++ u-boot-1.1.2/common/cmd_nvedit.c
@@ -570,19 +570,19 @@
 /**************************************************/
 
 U_BOOT_CMD(
-	printenv, CFG_MAXARGS, 1,	do_printenv,
-	"printenv- print environment variables\n",
+	env, CFG_MAXARGS, 1,	do_printenv,
+	"env     - print environment variables\n",
 	"\n    - print values of all environment variables\n"
-	"printenv name ...\n"
+	"env name ...\n"
 	"    - print value of environment variable 'name'\n"
 );
 
 U_BOOT_CMD(
-	setenv, CFG_MAXARGS, 0,	do_setenv,
-	"setenv  - set environment variables\n",
+	envset, CFG_MAXARGS, 0,	do_setenv,
+	"envset  - set environment variables\n",
 	"name value ...\n"
 	"    - set environment variable 'name' to 'value ...'\n"
-	"setenv name\n"
+	"envset name\n"
 	"    - delete environment variable 'name'\n"
 );
 
@@ -590,8 +590,8 @@
     ((CONFIG_COMMANDS & (CFG_CMD_ENV|CFG_CMD_FLASH)) == \
       (CFG_CMD_ENV|CFG_CMD_FLASH))
 U_BOOT_CMD(
-	saveenv, 1, 0,	do_saveenv,
-	"saveenv - save environment variables to persistent storage\n",
+	envsave, 1, 0,	do_saveenv,
+	"envsave - save environment variables to persistent storage\n",
 	NULL
 );
 
@@ -600,16 +600,16 @@
 #if (CONFIG_COMMANDS & CFG_CMD_ASKENV)
 
 U_BOOT_CMD(
-	askenv,	CFG_MAXARGS,	1,	do_askenv,
-	"askenv  - get environment variables from stdin\n",
+	envask,	CFG_MAXARGS,	1,	do_askenv,
+	"envask  - get environment variables from stdin\n",
 	"name [message] [size]\n"
 	"    - get environment variable 'name' from stdin (max 'size' chars)\n"
-	"askenv name\n"
+	"envask name\n"
 	"    - get environment variable 'name' from stdin\n"
-	"askenv name size\n"
+	"envask name size\n"
 	"    - get environment variable 'name' from stdin (max 'size' chars)\n"
-	"askenv name [message] size\n"
-	"    - display 'message' string and get environment variable 'name'"
+	"envask name [message] size\n"
+	"    - display 'message' string and get environment variable 'name' "
 	"from stdin (max 'size' chars)\n"
 );
 #endif	/* CFG_CMD_ASKENV */
@@ -617,8 +617,8 @@
 #if (CONFIG_COMMANDS & CFG_CMD_RUN)
 int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 U_BOOT_CMD(
-	run,	CFG_MAXARGS,	1,	do_run,
-	"run     - run commands in an environment variable\n",
+	envrun,	CFG_MAXARGS,	1,	do_run,
+	"envrun  - run commands in an environment variable\n",
 	"var [...]\n"
 	"    - run the commands in the environment variable(s) 'var'\n"
 );
--- u-boot-1.1.2/common/cmd_cache.c~command-names
+++ u-boot-1.1.2/common/cmd_cache.c
@@ -96,15 +96,15 @@
 
 
 U_BOOT_CMD(
-	icache,   2,   1,     do_icache,
-	"icache  - enable or disable instruction cache\n",
+	cachei,   2,   1,     do_icache,
+	"cachei  - enable or disable instruction cache\n",
 	"[on, off]\n"
 	"    - enable or disable instruction cache\n"
 );
 
 U_BOOT_CMD(
-	dcache,   2,   1,     do_dcache,
-	"dcache  - enable or disable data cache\n",
+	cached,   2,   1,     do_dcache,
+	"cached  - enable or disable data cache\n",
 	"[on, off]\n"
 	"    - enable or disable data (writethrough) cache\n"
 );