path: root/packages/obsolete/nslu2/nslu2-kernel/2.6.14/70-nslu2-io.patch

--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:19:43.443489188 -0700
+++ linux-2.6.13/arch/arm/mach-ixp4xx/Makefile	2005-10-26 15:24:08.652177718 -0700
@@ -8,5 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pc
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-pci.o gtwx5715-setup.o
-obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o
+obj-$(CONFIG_MACH_NSLU2)	+= nslu2-pci.o nslu2-setup.o nslu2-power.o nslu2-rtc.o nslu2-io.o
 
--- linux-2.6.13/.pc/70-nslu2-io.patch/arch/arm/mach-ixp4xx/nslu2-io.c	2005-10-26 15:19:43.979522918 -0700
+++ linux-2.6.13/arch/arm/mach-ixp4xx/nslu2-io.c	2005-10-26 15:24:08.652177718 -0700
@@ -0,0 +1,548 @@
+//=============================================================================
+//
+// n2-io.c version 0.1.7
+// Author: Karen Spearel <kas11 at tampabay.rr.com>
+// please report problems/bugs directly to the address above
+//
+// Boilerplate to be added "real soon now"...it is and has always been GPL'ed per
+// MODULE_LICENSE but is offered without warrantee of any sort..use at your own risk
+//
+// NOTE: THIS IS INCOMPLETE.  INCLUDED ONLY TO KEEP FROM BREAKING THE BUILD,
+// IT BEEPS AND SENDS A MESSAGE TO /proc/poweroff.  EVENTUALLY IT
+// WILL TALK TO THE n2_pbd DAEMON.  EVENTUALLY THE LED DRIVER
+// WILL TALK TO SOME USERLAND APP BUT ***NOT*** SET_LEDS.
+// 
+//=============================================================================
+//	GPIO		Function	State
+//	0		Red LED		Status		
+//	1		Green LED	Ready = 1
+//	2		Disk 2 LED	On = 0
+//	3		Disk 1 LED	On = 0
+//	4		Buzzer
+//	5		Power Button	Pressed = 1
+//	8		Power Down	Output = 1 powers down NSLU2
+//	12		Reset		Pressed = 0
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/reboot.h>
+
+#include <asm/uaccess.h>
+#include <asm-arm/irq.h>
+#include <asm-arm/delay.h>
+
+/* Set this to 1 to output lots of debug messages. */
+#define NSLU2_IO_DEBUG 0
+
+#if NSLU2_IO_DEBUG
+#define nslu2_io_debug(args) printk args
+#else
+#define nslu2_io_debug(args) ((void)0)
+#endif
+
+#define VERSION			"0.1.7"
+
+#define	NSLU2BZ_MAJOR		62		//buzzer
+#define NSLU2LM_MAJOR		126
+
+
+#define NSLU2_BEEP_DUR_LONG	2000
+#define NSLU2_BEEP_DUR_MED	400
+#define NSLU2_BEEP_DUR_SHORT	100
+#define NSLU2_BEEP_PITCH_HIGH	250
+#define NSLU2_BEEP_PITCH_MED	500
+#define NSLU2_BEEP_PITCH_LOW	1000
+#define NSLU2_LONG_DELAY	30000
+
+#define NSLU2_BZ_BM		(1L << NSLU2_GPIO_BUZZ)
+
+// ioctls -- 'M" is used for sound cards...we don't got one so it seems safe
+
+#define NSLU2BZ_BEEP_STOP		_IO('M',0)       //stop multi-beep at end of audible
+#define NSLU2BZ_BEEP		_IO('M',1)       //one beep at current defaults
+#define NSLU2BZ_BEEPS		_IOW('M',3,long) //param beeps at current defaults
+#define NSLU2BZ_TONESET		_IOW('M',4,long) //set tone: range is high=250 to low=2000
+#define NSLU2BZ_ONTIME		_IOW('M',5,long) //ontime for multi-beeps in jiffies
+#define	NSLU2BZ_SILENTTIME		_IOW('M',6,long) //offtime for multi-beeps in jiffies
+#define NSLU2BZ_REPEATCNT		_IOW('M',7,long) //number of repeats for multi-beeps 0 = forever
+#define NSLU2BZ_COMBINED		_IOW('M',8,long) //combine all params in a long
+
+#define NSLU2LM_OFF		_IOW('M',32,long)
+#define NSLU2LM_ON			_IOW('M',33,long)
+#define NSLU2LM_BLINK		_IOW('M',34,long)
+#define NSLU2LM_ALT		_IOW('M',35,long)
+#define NSLU2LM_ALL_ON		_IO('M',36)
+#define NSLU2LM_ALL_OFF		_IO('M',37)
+
+#define PHYS_LEDS		4
+#define BLINK_DELAY		25
+
+//  OR Masks to turn these LEDs ON
+
+#define	RS_RED_ON	0x00000001	//0b0000 0000 0000 0010
+#define	RS_GRN_ON	0x00000002	//0b0000 0000 0000 0001
+#define RS_YEL_ON	0x00000003	//0b0000 0000 0000 0011
+
+// AND Masks to turn these LEDs OFF
+
+#define	RS_RED_OFF	0xfffffffe	//0b1111 1111 1111 1101
+#define	RS_GRN_OFF	0xfffffffd	//0b1111 1111 1111 1110
+#define RS_YEL_OFF	0xfffffffc	//0b1111 1111 1111 1100
+
+// AND Masks to turn these LEDs ON
+
+#define DISK1_ON	0xfffffff7	//0b1111 1111 1111 0111
+#define	DISK2_ON	0xfffffffb	//0b1111 1111 1111 1011
+
+// Or Masks to turn these LEDs OFF
+
+#define DISK1_OFF	0x00000008	//0b0000 0000 0000 1000
+#define	DISK2_OFF	0x00000004	//0b0000 0000 0000 0100	
+
+// EOR masks for toggling LEDs on/off
+
+#define RS_RG_ALT	0x00000003	//eor mask to toggle rs rg bits
+#define RS_GRN_TGL	0x00000002
+#define RS_RED_TGL	0x00000001
+#define DISK1_TGL	0x00000008
+#define DISK2_TGL	0x00000004
+
+// The LED names for switches
+
+#define LED_RS_RED	0
+#define LED_RS_GRN	1
+#define	LED_DISK1	2
+#define LED_DISK2	3
+#define LED_ALL		4
+
+static unsigned long ontime = 50;
+static unsigned long offtime = 450;
+static unsigned long bz_repeatcnt = 10;
+static unsigned long tone = 1000;
+
+static struct timer_list n2lm_rsg_timer;	//rs green 
+static struct timer_list n2lm_rsr_timer;	//rs red
+static struct timer_list n2lm_d1_timer;		//drive 1
+static struct timer_list n2lm_d2_timer;		//drive 2
+static struct timer_list n2bz_timer;		//beeper
+
+// sysfs class
+static struct class *n2lm_class;
+
+//==================================================================================================
+//
+// Blinking is handled entirely by the 4 timer handlers.  On timeout, the bit in the
+// GPIO output register is xor'd with a mask corresponding to the selected led which simply
+// flips that bit.  No record of what any of the other leds is doing is needed.
+//
+//==================================================================================================
+// this blinks rs green or green/yellow if rs red is on
+#ifndef CONFIG_LEDS
+static void n2lm_rsg_handler(unsigned long data)
+{
+	*IXP4XX_GPIO_GPOUTR ^= RS_GRN_TGL;			//flip the led
+	n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;		//next timeout
+	add_timer(&n2lm_rsg_timer);				//reinit timer
+	return;
+}
+
+// this blinks or alternates rs red green... inited wit green on/red off
+static void n2lm_rsr_handler(unsigned long data)
+{
+	*IXP4XX_GPIO_GPOUTR ^= n2lm_rsr_timer.data;
+	n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
+	add_timer(&n2lm_rsr_timer);
+	return;	
+}
+// blinks disk 1
+static void n2lm_d1_handler(unsigned long data)
+{
+	*IXP4XX_GPIO_GPOUTR ^= DISK1_TGL;
+	n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
+	add_timer(&n2lm_d1_timer);
+	return;
+}
+// blinks disk 2
+static void n2lm_d2_handler(unsigned long data)
+{
+	*IXP4XX_GPIO_GPOUTR ^= DISK2_TGL;
+	n2lm_d2_timer.expires = jiffies + BLINK_DELAY;
+	add_timer(&n2lm_d2_timer);
+	return;
+}
+
+//==================================================================================================
+
+static void n2lm_timer_start(unsigned long led)
+{
+
+	nslu2_io_debug((KERN_DEBUG "timer: %ld\n",led));
+
+	switch(led) {
+		case LED_RS_RED:
+			n2lm_rsr_timer.expires = jiffies + BLINK_DELAY;
+			add_timer(&n2lm_rsr_timer);
+			break;
+
+		case LED_RS_GRN:
+			n2lm_rsg_timer.expires = jiffies + BLINK_DELAY;
+			add_timer(&n2lm_rsg_timer);
+			break;
+
+		case LED_DISK1:
+			n2lm_d1_timer.expires = jiffies + BLINK_DELAY;
+			add_timer(&n2lm_d1_timer);
+ 			break;
+
+		case LED_DISK2:
+			n2lm_d2_timer.expires = jiffies + BLINK_DELAY; 
+			add_timer(&n2lm_d2_timer);
+			break;
+
+		default:
+			break;
+	}
+	return;
+}
+
+//==================================================================================================
+
+static void n2lm_timer_stop(unsigned long led)
+{
+	switch (led) {
+		case LED_RS_RED:
+			del_timer(&n2lm_rsr_timer);
+			break;
+		case LED_RS_GRN:
+			del_timer(&n2lm_rsg_timer);
+			break;
+		case LED_DISK1:
+			del_timer(&n2lm_d1_timer);
+ 			break;
+		case LED_DISK2: 
+			del_timer(&n2lm_d2_timer);
+			break;
+		default:
+			break;
+	}
+	return;
+}
+
+//--------------------------------------------------------------------------------------------------
+
+static void n2lm_timer_stop_all(void)
+{
+	del_timer(&n2lm_rsg_timer);
+	del_timer(&n2lm_rsr_timer);
+	del_timer(&n2lm_d1_timer); 
+	del_timer(&n2lm_d2_timer);
+	return;
+}
+//--------------------------------------------------------------------------------------------------
+
+static void n2lm_ledon(unsigned long led)
+{
+
+	nslu2_io_debug((KERN_DEBUG "ledon: %ld\n", led));
+
+	switch (led) {
+		case LED_RS_RED:	
+			*IXP4XX_GPIO_GPOUTR |= RS_RED_ON;	//1
+			return;
+		case LED_RS_GRN:
+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;	//2
+			return;
+		case LED_DISK1:
+			*IXP4XX_GPIO_GPOUTR &= DISK1_ON;	//0xfffffff7
+			return;
+		case LED_DISK2:	
+			*IXP4XX_GPIO_GPOUTR &= DISK2_ON;	//0xfffffffb
+			return;
+		case LED_ALL:					//all green
+			*IXP4XX_GPIO_GPOUTR |= RS_GRN_ON;
+			*IXP4XX_GPIO_GPOUTR &= (DISK1_ON & DISK2_ON);
+			return;	
+	}
+}
+
+//--------------------------------------------------------------------------------------------------
+
+static void n2lm_ledoff(unsigned long led)
+{
+
+	switch (led) {
+		case LED_RS_RED:	
+			*IXP4XX_GPIO_GPOUTR &= RS_RED_OFF;	//0xffffffffe
+			return;
+		case LED_RS_GRN:
+			*IXP4XX_GPIO_GPOUTR &= RS_GRN_OFF;	//0xfffffffd
+			return;
+		case LED_DISK1:
+			*IXP4XX_GPIO_GPOUTR |= DISK1_OFF;	//0x00000008
+			return;
+		case LED_DISK2:	
+			*IXP4XX_GPIO_GPOUTR |= DISK2_OFF;	//0x00000004
+			return;
+		case LED_ALL:
+			*IXP4XX_GPIO_GPOUTR &= (RS_GRN_OFF & RS_RED_OFF);
+			*IXP4XX_GPIO_GPOUTR |= (DISK1_OFF | DISK2_OFF);
+	}
+}
+
+//==================================================================================================
+
+static int n2lm_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long led)
+{
+
+	nslu2_io_debug((KERN_DEBUG "cmd=%d, led=%ld\n", cmd, led));
+	
+	if (led < 0 || led >= PHYS_LEDS)
+		return -EINVAL;
+
+	switch (cmd ) {
+		case NSLU2LM_ON:
+			n2lm_timer_stop(led);
+			n2lm_ledon(led);
+			break;
+			
+		case NSLU2LM_OFF:
+			n2lm_timer_stop(led);
+			n2lm_ledoff(led);
+			break;
+			
+		case NSLU2LM_BLINK:
+			n2lm_ledon(led);
+			if (led == LED_RS_RED)
+				n2lm_rsr_timer.data = RS_RED_TGL;
+			n2lm_timer_start(led);
+			break;
+
+		case NSLU2LM_ALT:
+			if (led == LED_RS_RED)
+			{
+				n2lm_ledon(LED_RS_GRN);
+				n2lm_ledoff(LED_RS_RED);
+				n2lm_rsr_timer.data = RS_RG_ALT;
+				n2lm_timer_start(LED_RS_RED);
+				break;
+			} else
+				return -EINVAL;
+		
+		case NSLU2LM_ALL_ON:
+			n2lm_timer_stop_all();
+			n2lm_ledon(LED_ALL);
+			break;
+		
+		case NSLU2LM_ALL_OFF:
+			n2lm_timer_stop_all();
+			n2lm_ledoff(LED_ALL);
+			break;
+		
+		default:
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct file_operations n2lm_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl		= n2lm_ioctl,
+};
+#endif
+//==================================================================================================
+// We can't do anything fancy here since the system tick rate is far below that required to
+// generate a desirable tone.  Therefore we haven't much choice but to use a busy loop until
+// I get up to speed on the timers.  The saving grace is that for the normal uses, nothing 
+// important should be haprepening. 
+//==================================================================================================
+
+static void n2_buzz(int tone_delay, int duration)
+{
+	int i;
+
+	*IXP4XX_GPIO_GPOER &= ~NSLU2_BZ_BM;
+		
+	for (i = 1; i < duration; i++) {
+		*IXP4XX_GPIO_GPOUTR &= ~NSLU2_BZ_BM;
+		udelay(tone_delay);
+		*IXP4XX_GPIO_GPOUTR |= NSLU2_BZ_BM;
+		udelay(tone_delay);
+	}
+	*IXP4XX_GPIO_GPOER |= NSLU2_BZ_BM;
+
+	return;
+}
+//=================================================================================================
+
+// this handles the buzzer duty cycle
+static void n2bz_handler(unsigned long data)
+{
+	if (--bz_repeatcnt > 0) {			//if just one beep left to do
+		n2bz_timer.expires = jiffies + ontime + offtime;	//next timeout
+		add_timer(&n2bz_timer);					//reinit timer
+	}
+	n2_buzz(tone/2, ontime);
+	nslu2_io_debug((KERN_DEBUG "Count = %d\tOntime = %d\n", bz_repeatcnt, ontime));
+	return;
+}
+
+//==================================================================================================
+
+static int n2bz_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long param)
+{
+	switch (cmd) {
+		case NSLU2BZ_BEEP:
+			n2_buzz(tone/2, ontime);
+			break;
+	
+		case NSLU2BZ_BEEP_STOP:
+			del_timer(&n2bz_timer);
+			break;
+
+		case NSLU2BZ_BEEPS:
+			if (param == 0)
+				bz_repeatcnt = 0xffffffff;
+			else
+				bz_repeatcnt = param;
+			n2bz_handler(0);
+			break;
+	
+		case NSLU2BZ_TONESET:
+			if (param >= 250 && param <= 2000)
+				tone = param;
+			break;
+
+		case NSLU2BZ_ONTIME:
+			if (param > 4 && param < 201)
+				ontime = param;
+			break;
+
+		case NSLU2BZ_SILENTTIME:
+			if (param > ontime)			//enforce a reasonable duty cycle
+				offtime = param;
+			else
+				offtime = ontime;
+			break;
+
+		case NSLU2BZ_REPEATCNT:
+			if (param == 0)
+				bz_repeatcnt = 0xffffffff;
+			else
+				bz_repeatcnt = param;
+			break;
+
+		case NSLU2BZ_COMBINED:
+			bz_repeatcnt =  (param & 0xF0000000) >> 28;	//repeat 1 - 16
+			ontime =        (param & 0x0FF00000) >> 20; 	//ontime 1 - 256 jiffies
+			offtime =       (param & 0x000FFF00) >> 8;	//offtime 1 - 4095 jiffies
+			tone =          (param & 0x000000FF) << 4;	//tone (1 - 255) * 16
+			break;
+
+		default:
+			break;
+	}
+	return 0;
+}
+
+static struct file_operations n2bz_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl		= n2bz_ioctl,
+};
+
+static void n2iom_initarch(void)
+{
+#ifndef CONFIG_LEDS
+	init_timer(&n2lm_rsg_timer);
+	init_timer(&n2lm_rsr_timer);
+	init_timer(&n2lm_d1_timer);
+	init_timer(&n2lm_d2_timer);
+
+	n2lm_rsr_timer.function = n2lm_rsr_handler;
+	n2lm_rsg_timer.function = n2lm_rsg_handler;
+	n2lm_d2_timer.function = n2lm_d2_handler;
+	n2lm_d1_timer.function = n2lm_d1_handler;
+#endif
+
+	init_timer(&n2bz_timer);
+	n2bz_timer.function = n2bz_handler;
+
+	n2lm_rsr_timer.data = n2lm_rsg_timer.data = n2lm_d1_timer.data = n2lm_d2_timer.data = n2bz_timer.data = 0;
+
+#ifndef CONFIG_LEDS
+	*IXP4XX_GPIO_GPOER &= 0xfffffff0;	//enable gpio 0-3
+	*IXP4XX_GPIO_GPOUTR |= 0x00000003;	//turn off the leds
+	*IXP4XX_GPIO_GPOUTR &= 0xfffffffc;
+	n2lm_ledon(LED_ALL);
+	n2_buzz(NSLU2_BEEP_PITCH_MED, NSLU2_BEEP_DUR_SHORT);
+	n2lm_ledoff(LED_ALL);
+
+	// Default the Ready/Status to Red during kernel boot, Turn Green at the end of sysvinit
+	n2lm_ledon(LED_RS_RED);
+#endif
+
+	return;
+}
+
+//==================================================================================================
+
+static int __init n2iom_init(void)
+{
+	printk(KERN_INFO "NSLU2: i/o, %s\n", VERSION);
+  	
+	n2iom_initarch();
+
+	n2lm_class = class_create(THIS_MODULE, "nslu2");
+
+#ifndef CONFIG_LEDS
+	if (register_chrdev(NSLU2LM_MAJOR, "n2_ledm", &n2lm_fops) < 0) {
+		printk(KERN_DEBUG "Led Manager Major %d not available\n", NSLU2LM_MAJOR);
+		return -EBUSY;
+	}
+	else {
+		class_device_create(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0), NULL, "leds");
+	}
+#endif
+
+	if (register_chrdev(NSLU2BZ_MAJOR, "n2_bzm", &n2bz_fops) < 0) {
+		printk(KERN_DEBUG "Buzzer Major %d not available\n", NSLU2BZ_MAJOR);
+		return -EBUSY;
+	}
+	else {
+		class_device_create(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0), NULL, "buzzer");
+	}
+
+	return 0;
+}
+
+//==================================================================================================
+
+static void __exit n2iom_exit(void)
+{
+
+#ifndef CONFIG_LEDS
+	del_timer(&n2lm_rsg_timer);
+	del_timer(&n2lm_rsr_timer);
+	del_timer(&n2lm_d1_timer);
+	del_timer(&n2lm_d2_timer);	
+
+	unregister_chrdev(NSLU2LM_MAJOR, "n2lm" );
+	class_device_destroy(n2lm_class, MKDEV(NSLU2LM_MAJOR, 0));
+#endif
+
+	unregister_chrdev(NSLU2BZ_MAJOR, "n2bz");
+	class_device_destroy(n2lm_class, MKDEV(NSLU2BZ_MAJOR, 0));
+
+	class_destroy(n2lm_class);
+}
+
+module_init(n2iom_init);
+module_exit(n2iom_exit);
+
+MODULE_AUTHOR("Karen Spearel <kas11@tampabay.rr.com>");
+MODULE_DESCRIPTION("NSLU2 I/O driver");
+MODULE_LICENSE("GPL");