path: root/packages/linux/opensimpad/simpad-proc-sys-board.patch

#
# Patch managed by http://www.holgerschurig.de/patcher.html
#

--- linux-2.4.27/drivers/char/Makefile~simpad-proc-sys-board
+++ linux-2.4.27/drivers/char/Makefile
@@ -134,6 +134,9 @@
   ifeq ($(CONFIG_SA1100_CERF_CPLD),y)
     KEYBD    += cerf_keyb.o
   endif
+  ifeq ($(CONFIG_SA1100_SIMPAD),y)
+    obj-$(CONFIG_SA1100_SIMPAD) += sysctl.o
+  endif
   ifeq ($(CONFIG_ARCH_FORTUNET),y)
     KEYMAP   := defkeymap.o
   endif
--- /dev/null
+++ linux-2.4.27/drivers/char/sysctl.c
@@ -0,0 +1,297 @@
+/*
+ *  /proc/sys/board - Interface to the SIMpad cs3 register
+ *
+ *  (c) 2004 by Till Harbaum, BeeCon GmbH, <harbaum@beecon.de>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sysctl.h>
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include <asm/io.h>
+#include <asm/arch/simpad.h>
+#include <asm/uaccess.h>
+
+extern long get_cs3_shadow(void);
+extern void set_cs3_bit(int value);
+extern void clear_cs3_bit(int value);
+
+/*
+ * This is the number for the "board" entry in /proc/sys:
+ */
+#define SIMPAD_SYSCTL 1312
+
+/*
+ * These are the numbers for the entries in /etc/sys/board
+ */
+enum {
+	CTL_NAME=991,
+	CTL_CS3,          // the complete latch
+	CTL_VCC_5V_EN,    // For 5V PCMCIA 
+        CTL_VCC_3V_EN,    // FOR 3.3V PCMCIA
+        CTL_EN1,          // This is only for EPROM's
+        CTL_EN0,          // Both should be enable for 3.3V or 5V
+        CTL_DISPLAY_ON,
+        CTL_PCMCIA_BUFF_DIS,
+        CTL_MQ_RESET,
+        CTL_PCMCIA_RESET,
+        CTL_DECT_POWER_ON,
+        CTL_IRDA_SD,      // Shutdown for powersave
+        CTL_RS232_ON, 
+        CTL_SD_MEDIAQ,    // Shutdown for powersave
+        CTL_LED2_ON,
+        CTL_IRDA_MODE,    // Fast/Slow IrDA mode
+        CTL_ENABLE_5V,    // Enable 5V circuit
+        CTL_RESET_SIMCARD
+};
+
+static const char simpad_board_name[] = "SIMpad";
+static int  dummy_int;
+static char dummy_str[80];
+
+static int
+simpad_sysctl_handler(ctl_table * ctl, int write, struct file *filp,
+		      void *buffer, size_t * lenp)
+{
+	int *valp = ctl->data;
+	int val;
+	int ret;
+
+	// Update parameters from the real registers
+	switch (ctl->ctl_name) {
+	case CTL_CS3:
+	    sprintf(dummy_str, "0x%04lx", get_cs3_shadow());
+	    return proc_dostring(ctl,write,filp,buffer,lenp);
+	    break;
+
+        // the 16 control bits of the cs3 register
+        case CTL_VCC_5V_EN:
+	case CTL_VCC_3V_EN:
+	case CTL_EN1:
+	case CTL_EN0:
+	case CTL_DISPLAY_ON:
+	case CTL_PCMCIA_BUFF_DIS:
+	case CTL_MQ_RESET:
+	case CTL_PCMCIA_RESET:
+	case CTL_DECT_POWER_ON:
+	case CTL_IRDA_SD:
+	case CTL_RS232_ON:
+	case CTL_SD_MEDIAQ:
+	case CTL_LED2_ON:
+	case CTL_IRDA_MODE:
+	case CTL_ENABLE_5V:
+	case CTL_RESET_SIMCARD:
+	        *valp = (get_cs3_shadow() & 
+		        (1u << (ctl->ctl_name-CTL_VCC_5V_EN)))?1:0;
+                break;
+
+	default:
+		// Just ignore unsupported parameters
+		break;
+	}
+
+	// the strings are all handled now and ran onto a return;
+
+	// Save old state
+	val = *valp;
+
+	// Perform the generic integer operation        
+	if ((ret = proc_dointvec(ctl, write, filp, buffer, lenp)) != 0)
+		return (ret);
+
+	// Write changes out to the registers
+	if (write && *valp != val) {
+
+		val = *valp;
+		switch (ctl->ctl_name) {
+
+                // the 16 control bits of the cs3 register
+	        case CTL_DISPLAY_ON:
+	        case CTL_DECT_POWER_ON:
+  	        case CTL_IRDA_SD:
+	        case CTL_SD_MEDIAQ:
+	        case CTL_LED2_ON:
+	        case CTL_IRDA_MODE:
+	        case CTL_RESET_SIMCARD:
+		        if (val) 
+		                set_cs3_bit(1u << (ctl->ctl_name-CTL_VCC_5V_EN));
+		        else     
+		                clear_cs3_bit(1u << (ctl->ctl_name-CTL_VCC_5V_EN));
+                break;
+
+		default:
+			// Just ignore unsupported parameters
+			break;
+		}
+	}
+
+	return ret;
+}
+
+#define PROC_RDONLY 0444
+#define PROC_RDWR   0664
+
+static ctl_table simpad_table[] = {
+        {
+	 procname:	"sys_name",
+	 ctl_name:	CTL_NAME, 
+	 data:		&simpad_board_name,
+	 maxlen:	sizeof(simpad_board_name),
+         proc_handler:	&proc_dostring,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"cs3",
+	 ctl_name:	CTL_CS3, 
+	 data:		&dummy_str,
+	 maxlen:	sizeof(dummy_str),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"vcc_5v_en",
+	 ctl_name:	CTL_VCC_5V_EN,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"vcc_3v_en",
+	 ctl_name:	CTL_VCC_3V_EN,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"en1",
+	 ctl_name:	CTL_EN1,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"en0",
+	 ctl_name:	CTL_EN0,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"display_on",
+	 ctl_name:	CTL_DISPLAY_ON,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"pcmcia_buff_dis",
+	 ctl_name:	CTL_PCMCIA_BUFF_DIS,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"mq_reset",
+	 ctl_name:	CTL_MQ_RESET,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"pcmcia_reset",
+	 ctl_name:	CTL_PCMCIA_RESET,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"dect_power_on",
+	 ctl_name:	CTL_DECT_POWER_ON,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"irda_sd",
+	 ctl_name:	CTL_IRDA_SD,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"rs232_on",
+	 ctl_name:	CTL_RS232_ON,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"sd_mediaq",
+	 ctl_name:	CTL_SD_MEDIAQ,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"led2_on",
+	 ctl_name:	CTL_LED2_ON,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"irda_mode",
+	 ctl_name:	CTL_IRDA_MODE,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	}, {
+	 procname:	"enable_5v",
+	 ctl_name:	CTL_ENABLE_5V,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDONLY,
+	}, {
+	 procname:	"reset_simcard",
+	 ctl_name:	CTL_RESET_SIMCARD,
+	 data:		&dummy_int,
+	 maxlen:	sizeof(int),
+         proc_handler:	&simpad_sysctl_handler,
+	 mode:		PROC_RDWR,
+	},
+        {0}
+        };
+
+static ctl_table simpad_root_table[] = {
+        {SIMPAD_SYSCTL, "board", NULL, 0, 0555, simpad_table},
+        {0}
+        };
+
+
+static struct ctl_table_header *simpad_table_header;
+
+
+static int __init simpad_sysctl_init(void) 
+{
+        simpad_table_header = register_sysctl_table(simpad_root_table, 0);
+        if (!simpad_table_header)
+                return -ENOMEM;
+        return 0;
+}
+
+static void __exit simpad_sysctl_exit(void)
+{
+        unregister_sysctl_table(simpad_table_header);
+}
+
+
+module_init(simpad_sysctl_init);
+module_exit(simpad_sysctl_exit);
+
+MODULE_AUTHOR("Till Harbaum <harbaum@beecon.de>");
+MODULE_DESCRIPTION("Implements /proc/sys/board");
+MODULE_LICENSE("GPL");