path: root/packages/linux/linux-rp-2.6.23/tosa-power-r18.patch

Index: linux-2.6.17/arch/arm/mach-pxa/Makefile
===================================================================
--- linux-2.6.17.orig/arch/arm/mach-pxa/Makefile	2006-09-19 20:51:33.984424500 +0200
+++ linux-2.6.17/arch/arm/mach-pxa/Makefile	2006-09-19 21:08:04.922354250 +0200
@@ -16,7 +16,7 @@ obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o 
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o sharpsl_pm.o poodle_pm.o
-obj-$(CONFIG_MACH_TOSA)         += tosa.o
+obj-$(CONFIG_MACH_TOSA)         += tosa.o sharpsl_pm.o tosa_pm.o
 obj-$(CONFIG_MACH_EM_X270) += em-x270.o
 obj-$(CONFIG_MACH_HX2750)	+= hx2750.o hx2750_test.o
 
Index: linux-2.6.17/arch/arm/mach-pxa/tosa_pm.c
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ linux-2.6.17/arch/arm/mach-pxa/tosa_pm.c	2006-09-19 21:08:34.476201250 +0200
@@ -0,0 +1,661 @@
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/stat.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/wm97xx.h>
+
+#include <asm/apm.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/hardware/scoop.h>
+#include <asm/hardware/tmio.h>
+
+#include <asm/arch/sharpsl.h>
+#include <asm/arch/tosa.h>
+#include <asm/arch/pxa-regs.h>
+#include <sound/soc.h>
+#include <sound/ac97_codec.h>
+#include "sharpsl.h"
+
+extern int tosa_bl_intensity(void);
+volatile static int ad_polling;
+static int tosa_pm_driver_probe(struct device *dev);
+static int tosa_pm_driver_remove(struct device *dev);
+static struct wm97xx *wm9712;
+
+/************************************************************
+ * AC97 functions
+ ************************************************************/
+#define AC97_TIMEOUT_VAL	0x1000000
+
+#define AC97_MISC_MODEM_STAT	0x0056
+#define AC97_GPIO_CONFIG	0x004C
+
+static u16 tosa_ac97_read(unsigned short reg)
+{
+	volatile u32 *reg_addr;
+	volatile int timeout;
+	unsigned short data;
+
+	if (CAR & CAR_CAIP) {
+		printk(KERN_CRIT ": CAR_CAIP already set\n");
+		return 0;	
+	}
+
+	if (reg == AC97_GPIO_STATUS)
+		reg_addr = &PMC_REG_BASE;
+	else
+		reg_addr = &PAC_REG_BASE;
+
+	reg_addr += (reg >> 1);
+
+	data=0;
+	GSR = GSR_CDONE | GSR_SDONE;
+
+	data = *reg_addr;
+	timeout = 0;
+
+	while(((GSR & GSR_SDONE)) == 0 && (timeout++ < AC97_TIMEOUT_VAL));
+
+	if ((timeout >= AC97_TIMEOUT_VAL)) {
+		GSR = GSR;
+		printk(KERN_CRIT ": AC97 is busy1.\n");
+		return data;
+	}
+
+	// actual read
+	GSR = GSR_CDONE | GSR_SDONE;
+	data = *reg_addr;
+
+	timeout = 0;
+	while(((GSR & GSR_SDONE) == 0) && (timeout++<AC97_TIMEOUT_VAL));
+	if ((timeout >= AC97_TIMEOUT_VAL)) {
+		GSR = GSR;
+		printk(KERN_CRIT ": AC97 is busy2.\n");
+		return data;
+	}
+
+	return data;
+}
+
+static void tosa_ac97_write(unsigned short reg, unsigned short val)
+{
+	volatile u32 *reg_addr;
+	volatile int timeout=0;
+
+	if (CAR & CAR_CAIP) {
+		printk(KERN_CRIT ": CAR_CAIP already set\n");
+		return;	
+	}
+
+	GSR = GSR_CDONE | GSR_SDONE;
+	if (reg == AC97_GPIO_STATUS)
+		reg_addr = &PMC_REG_BASE;
+	else
+		reg_addr = &PAC_REG_BASE;
+
+	reg_addr += (reg >> 1);
+
+	*reg_addr = val;
+	while(((GSR & GSR_CDONE) == 0) && (timeout++ < AC97_TIMEOUT_VAL));
+	if (timeout >= AC97_TIMEOUT_VAL) {
+		printk(KERN_CRIT ": AC97 is busy.\n");
+	}
+}
+
+static void tosa_ac97_bit_clear(u8 reg, u16 val)
+{
+	unsigned short dat = tosa_ac97_read(reg);
+	dat &= ~val;
+	tosa_ac97_write(reg, dat);
+}
+
+static void tosa_ac97_bit_set(u8 reg, u16 val)
+{
+	unsigned short dat = tosa_ac97_read(reg);
+	dat |= val;
+	tosa_ac97_write(reg, dat);
+}
+
+
+static int tosa_ac97_init(void)
+{
+	int timeo;
+	
+	pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
+	pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
+	pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
+	pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
+	pxa_gpio_mode(GPIO20_DREQ0_MD);
+	
+	pxa_set_cken(CKEN2_AC97, 1);
+	/* AC97 power on sequense */
+	while ( 1 ) {
+		GCR = 0;
+		udelay(100);
+		GCR |= GCR_COLD_RST;
+		udelay(5);
+		GCR |= GCR_WARM_RST;
+		udelay(5);
+		for ( timeo = 0x10000; timeo > 0; timeo-- ) {
+			if ( GSR & GSR_PCR ) break;
+			mdelay(5);
+		}
+		if( timeo > 0 ) break;
+		printk(KERN_WARNING "AC97 power on retry!!\n");
+	}
+
+	tosa_ac97_write(AC97_EXTENDED_STATUS, 1);
+	/*
+	* Setting AC97 GPIO
+	*	i/o     function
+	*	GPIO1:   input   EAR_IN signal
+	*	GPIO2:   output  IRQ signal
+	*	GPIO3:   output  PENDOWN signal
+	*	GPIO4:   input   MASK signal
+	*	GPIO5:   input   DETECT MIC signal
+	*/			
+	//     AC97_GPIO_FUNC AC97_MISC_MODEM_STAT
+
+	tosa_ac97_bit_clear(AC97_MISC_MODEM_STAT,
+			((1<<2)|(1<<3)|(1<<4)|(1<<5)));
+	tosa_ac97_bit_clear(AC97_GPIO_CONFIG,(1<<2)|(1<<3));
+	tosa_ac97_bit_set(AC97_GPIO_CONFIG, (1<<1)|(1<<4)|(1<<5));
+
+	tosa_ac97_write(AC97_WM97XX_DIGITISER2, 0xc009);
+	tosa_ac97_write(AC97_WM97XX_DIGITISER1, 0x0030 | WM97XX_DELAY(4));
+
+	pxa_gpio_mode(GPIO32_SDATA_IN1_AC97_MD);
+	ad_polling = 1;
+	printk("tosa_ac97_init\n");
+}
+
+void tosa_ac97_exit(void)
+{
+	if (!(CKEN & CKEN2_AC97))
+		return;
+	
+	// power down the whole chip
+	tosa_ac97_write(AC97_POWERDOWN, 0x7fff);
+
+//       GCR &= ~(GCR_CDONE_IE | GCR_SDONE_IE | GCR_SECRDY_IEN | GCR_PRIRDY_IEN | GCR_SECRES_IEN | GCR_PRIRES_IEN);
+//        GSR = GSR;
+//	GCR = GCR_ACLINK_OFF;
+	pxa_set_cken(CKEN2_AC97, 0);
+	/* switch back to irq driver */
+	ad_polling = 0;
+	printk("tosa_ac97_exit\n");
+}
+
+int ac97_ad_input(u16 adcsel)
+{
+	unsigned short val = 0;
+	unsigned long timeout;
+
+	// prepare
+	tosa_ac97_read(AC97_WM97XX_DIGITISER_RD);
+	
+	if (adcsel & 0x8000)
+		adcsel = ((adcsel & 0x7fff) + 3) << 12;
+		
+	/* Conversion start */
+	tosa_ac97_write(AC97_WM97XX_DIGITISER1, (adcsel | WM97XX_POLL |  WM97XX_DELAY(4)));
+	timeout = 0x1000;
+	/* wait for POLL to go low */
+	while ((tosa_ac97_read(AC97_WM97XX_DIGITISER1) & WM97XX_POLL) && timeout) {
+		udelay(100);
+		timeout--;
+	}
+
+	val = tosa_ac97_read(AC97_WM97XX_DIGITISER_RD);
+	
+	val &= 0xFFF ;
+  
+	return val;
+}
+
+
+int tosa_read_aux_adc(u16 adcsel)  
+{
+	if (ad_polling)
+		return (ac97_ad_input(adcsel));
+	else
+		return (wm97xx_read_aux_adc(wm9712, adcsel));
+}
+
+static struct device_driver tosa_pm_driver = {
+    .name = "wm97xx-battery",
+    .bus = &wm97xx_bus_type,
+    .owner = THIS_MODULE,
+    .probe = tosa_pm_driver_probe,
+    .remove = tosa_pm_driver_remove,
+};
+
+#if 0
+#define TOSA_TEMP_READ_WAIT_TIME		(5)    // 5msec [Fix]
+int tosa_read_battery(struct wm97xx* wm, int channel)
+{
+	//return sprintf(buf, "%d\n", wm97xx_read_aux_adc(wm, input));
+
+	int wm_aux,i;
+	int value = 0;
+	int clear_mux;
+
+	switch(channel) {
+
+		case 0:	// Main
+
+			set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_V_ON);
+			reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT1_V_ON | TOSA_TC6393_BAT_SW_ON);
+			wm_aux = WM97XX_AUX_ID3;
+			break;
+
+		case 1: // Jacket
+
+			set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT1_V_ON);
+			reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_V_ON | TOSA_TC6393_BAT_SW_ON);
+			wm_aux = WM97XX_AUX_ID3;
+			break;
+
+		case 2:  // BU
+			set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BU_CHRG_ON);
+			wm_aux = WM97XX_AUX_ID4;
+			break;
+
+		case 3:  // Main Temp
+			set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT1_TH_ON);
+			reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_TH_ON);
+			wm_aux = WM97XX_AUX_ID2;
+			break;
+
+		case 4:  // Jacket Temp
+			set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_TH_ON);
+			reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT1_TH_ON);
+			wm_aux = WM97XX_AUX_ID2;
+			break;
+
+		default:
+			return -1;
+	}
+	
+	mdelay(TOSA_TEMP_READ_WAIT_TIME);
+	for(i=0;i<4;i++)
+	{
+		if (wm9712)
+			value += wm97xx_read_aux_adc(wm, wm_aux);
+		else
+			value += ac97_ad_input(wm, wm_aux);
+	}
+
+	value>>=2;
+	// reset the multiplexer
+	clear_mux = TOSA_TC6393_BAT0_V_ON  | TOSA_TC6393_BAT1_V_ON | TOSA_TC6393_BAT_SW_ON | TOSA_TC6393_BAT0_TH_ON | TOSA_TC6393_BAT1_TH_ON | TOSA_TC6393_BU_CHRG_ON;
+
+	return value;
+
+}
+#endif
+
+/* BL 5-3 */
+struct battery_thresh tosa_battery_levels_bl[] = {
+	{ 1663, 100 },
+	{ 1605,  75 },
+	{ 1564,  50 },
+	{ 1510,  25 },
+	{ 1435,   5 },
+	{   0,    0 },
+};
+
+/* BL 2-0 */
+struct battery_thresh tosa_battery_levels[] = {
+	{ 1679, 100 },
+	{ 1617,  75 },
+	{ 1576,  50 },
+	{ 1530,  25 },
+	{ 1448,   5 },
+	{   0,    0 },
+};
+
+struct pm_devices {
+	const char * name;
+	struct bus_type *bus;
+	struct device_driver *driver;
+	struct device * dev;
+	int (*resume)(struct device *dev, void * data);	//	int (*resume)(struct device *dev);
+	int (*suspend)(struct device *dev, void * data);//	int (*suspend)(struct device *dev, pm_message_t state);
+};
+
+/* Ugly
+   We need the following devices to measure the battery and control the charger:
+   Also we need access to these before we sleep and immediatly after we resume so we can't
+   control their pm via the kernel device manager. To access their pm functions we will backup
+   the suspend and resume handler and clear these pointers.
+   After that we can suspend and resume these devices.
+
+   Don't change the order of this table!!!!!
+*/
+static struct pm_devices dev_table[] = {
+	[0] = {
+		.name	= TMIO_SOC_NAME,
+		.bus	= &platform_bus_type,
+	},
+};
+
+static int tosa_pm_driver_probe(struct device *dev)
+{
+	wm9712 = dev->driver_data;
+	ad_polling = 0;
+	return 0;
+}
+
+static int tosa_pm_driver_remove(struct device *dev)
+{
+    wm9712 = NULL;
+    return 0;
+}
+
+
+static void tosa_charger_init(void)
+{
+    int i;
+
+    /* If this driver doesn't register, bad things will happen, Tosa won't boot,
+       and the world will possibly explode */
+    i = driver_register(&tosa_pm_driver);
+    if (i < 0)
+        panic("Cannot register the tosa_pm driver on the wm97xx bus. Halting.");
+
+	for(i=0;i<ARRAY_SIZE(dev_table);i++)
+	{
+		dev_table[i].driver = driver_find(dev_table[i].name, dev_table[i].bus);
+		if (dev_table[i].driver)
+		{
+			dev_table[i].resume = dev_table[i].driver->resume;
+			dev_table[i].suspend = dev_table[i].driver->suspend;
+			dev_table[i].driver->resume = NULL;
+			dev_table[i].driver->suspend = NULL;
+		}
+	}
+	
+	pxa_gpio_mode(TOSA_GPIO_AC_IN | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_BAT0_CRG | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_BAT1_CRG | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_BAT0_LOW | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_BAT1_LOW | GPIO_IN);
+
+	pxa_gpio_mode(TOSA_GPIO_JACKET_DETECT | GPIO_IN);
+	pxa_gpio_mode(TOSA_GPIO_POWERON | GPIO_IN);
+	sharpsl_pm_pxa_init();
+}
+
+
+static void tosa_measure_temp(int on)
+{
+	reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_TH_ON | TOSA_TC6393_BAT1_TH_ON);
+
+	if (on)
+		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT1_TH_ON);
+
+}
+
+static void tosa_charge(int on)
+{
+	if(on)
+		reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_CHARGE_OFF);
+	else
+		set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_CHARGE_OFF);
+}
+
+static void tosa_discharge1(int on)
+{
+}
+
+static void tosa_discharge(int on)
+{
+}
+
+
+static void tosa_presuspend(void)
+{
+	int i;
+	unsigned long wakeup_mask;
+	
+	// put remaining devices into sleep
+	for(i=0;i<ARRAY_SIZE(dev_table);i++)
+	{
+		if(dev_table[i].suspend)
+			driver_for_each_device(dev_table[i].driver, NULL, 
+			   (void*)&PMSG_SUSPEND, dev_table[i].suspend);
+	}
+	
+	tosa_ac97_exit();
+	
+	wakeup_mask = GPIO_bit(TOSA_GPIO_POWERON) | GPIO_bit(TOSA_GPIO_ON_KEY) | GPIO_bit(TOSA_GPIO_AC_IN);
+
+	wakeup_mask |= GPIO_bit(TOSA_GPIO_BAT0_LOW);
+	PWER = wakeup_mask | PWER_RTC;
+
+	PRER = wakeup_mask;
+	PFER = wakeup_mask;
+
+	for (i = 0; i <=15; i++) {
+		if (PRER & PFER & GPIO_bit(i)) {
+			if (GPLR0 & GPIO_bit(i) )
+				PRER &= ~GPIO_bit(i);
+			else
+				PFER &= ~GPIO_bit(i);
+		}
+	}
+	
+	/* Clear reset status */
+	RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
+
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR = PCFR_OPDE;
+	
+	/* Resume on keyboard power key */
+	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
+	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT); 
+	
+	GPDR0 = 0xC3810940;
+	GPDR1 = 0xFCFFAB82;
+	GPDR2 = 0x000F501f;
+//	write_scoop_reg(&tosascoop_device.dev,SCOOP_GPWR,0);
+// only debug
+reset_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_NOTE_LED);
+}
+
+void tosa_postsuspend(void)
+{
+	int i;
+// only debug
+set_scoop_gpio(&tosascoop_jc_device.dev, TOSA_SCOOP_JC_NOTE_LED);
+
+	for(i=ARRAY_SIZE(dev_table);i;i--)
+	{
+		if(dev_table[i-1].resume)
+			driver_for_each_device(dev_table[i-1].driver, NULL, 
+			   NULL, dev_table[i-1].resume);
+	}
+	tosa_ac97_init();
+	PMCR = 0x01;
+}
+
+void tosa_postresume(void)
+{
+	tosa_ac97_exit();
+}
+
+/*
+ * Check what brought us out of the suspend.
+ * Return: 0 to sleep, otherwise wake
+ */
+static int tosa_should_wakeup(unsigned int resume_on_alarm)
+{
+	int is_resume = 0;
+
+	dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
+
+	if ((PEDR & GPIO_bit(TOSA_GPIO_AC_IN))) {
+		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
+			/* charge on */
+			dev_dbg(sharpsl_pm.dev, "ac insert\n");
+			sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
+		} else {
+			/* charge off */
+			dev_dbg(sharpsl_pm.dev, "ac remove\n");
+			sharpsl_pm_led(SHARPSL_LED_OFF);
+			sharpsl_pm.machinfo->charge(0);
+			sharpsl_pm.charge_mode = CHRG_OFF;
+		}
+	}
+
+	if ((PEDR & GPIO_bit(GPIO_bit(TOSA_GPIO_BAT0_CRG))))
+		dev_dbg(sharpsl_pm.dev, "Charge full interrupt\n");
+
+	if (PEDR & GPIO_bit(TOSA_GPIO_POWERON))
+		is_resume |= GPIO_bit(TOSA_GPIO_POWERON);
+
+	if (PEDR & GPIO_bit(TOSA_GPIO_ON_KEY))
+		is_resume |= GPIO_bit(TOSA_GPIO_ON_KEY);
+
+	if (resume_on_alarm && (PEDR & PWER_RTC))
+		is_resume |= PWER_RTC;
+
+	return is_resume;
+}
+
+static unsigned long tosa_charger_wakeup(void)
+{
+//	return ~GPLR0 & ( GPIO_bit(TOSA_GPIO_AC_IN) | GPIO_bit(TOSA_GPIO_POWERON) | GPIO_bit(TOSA_GPIO_ON_KEY) );
+	return (~GPLR0 & ( GPIO_bit(TOSA_GPIO_POWERON) | GPIO_bit(TOSA_GPIO_ON_KEY) )) | (GPLR0 & GPIO_bit(TOSA_GPIO_AC_IN));
+}
+
+unsigned long tosa_read_bat(void)
+{
+	unsigned long value;
+	reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_V_ON | TOSA_TC6393_BAT1_V_ON | TOSA_TC6393_BAT_SW_ON);
+	mdelay(5);
+	value = tosa_read_aux_adc(WM97XX_AUX_ID3);
+	set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_BAT0_V_ON);
+	return value;
+}
+
+unsigned long tosapm_read_devdata(int type)
+{
+	switch(type) {
+	case SHARPSL_STATUS_ACIN:
+		return ((GPLR(TOSA_GPIO_AC_IN) & GPIO_bit(TOSA_GPIO_AC_IN)) == 0);		
+	case SHARPSL_STATUS_LOCK:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
+	case SHARPSL_STATUS_CHRGFULL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
+	case SHARPSL_STATUS_FATAL:
+		return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
+	case SHARPSL_ACIN_VOLT:
+		return 1000;	// not used on tosa
+	case SHARPSL_BATT_TEMP:
+		return tosa_read_aux_adc(WM97XX_AUX_ID2);
+	case SHARPSL_BATT_VOLT:
+		return tosa_read_bat();
+	default:
+		return tosa_read_bat();
+	}
+}
+
+static struct sharpsl_charger_machinfo tosa_pm_machinfo = {
+	.init            = tosa_charger_init,
+	.exit            = sharpsl_pm_pxa_remove,
+	.gpio_batlock    = TOSA_GPIO_BAT_LOCKED,
+	.gpio_acin       = TOSA_GPIO_AC_IN,
+	.gpio_batfull    = TOSA_GPIO_BAT0_CRG,
+	.batfull_irq	 = 0,
+	.discharge       = tosa_discharge,
+	.discharge1      = tosa_discharge1,
+	.charge          = tosa_charge,
+	.measure_temp    = tosa_measure_temp,
+	.presuspend      = tosa_presuspend,
+	.postsuspend     = tosa_postsuspend,
+	.postresume	 = tosa_postresume,
+	.read_devdata    = tosapm_read_devdata,
+	.charger_wakeup  = tosa_charger_wakeup,
+	.should_wakeup   = tosa_should_wakeup,
+        .backlight_limit = corgibl_limit_intensity,
+	.backlight_get_status= tosa_bl_intensity,
+	.bat_levels      = 6,
+	.bat_levels_noac = tosa_battery_levels,
+	.bat_levels_acin = tosa_battery_levels,
+	.bat_levels_noac_bl = tosa_battery_levels_bl,
+	.bat_levels_acin_bl = tosa_battery_levels_bl,
+	.charge_on_volt	  = 1200,	// 2.9V TOSA_MAIN_BATTERY_ERR_THRESH voltage < 1200 -> error
+	.charge_on_temp	  = 3600,	// --   TOSA_MAIN_BATTERY_EXIST_THRESH temp > 3600 -> error, no battery
+	.charge_acin_high = 1500,	// not used default value
+	.charge_acin_low  = 500,	// not used default value
+	.fatal_acin_volt  = 1572,	// 3.8V
+	.fatal_noacin_volt= 1551,	// 3.75V
+	.status_high_acin = 1564,	// 3.78V
+	.status_low_acin  = 1510,	// 3.65V
+	.status_high_noac = 1564,	// 3.78V
+	.status_low_noac  = 1510,	// 3.65V
+};
+
+static struct platform_device *tosapm_device;
+
+static int __devinit tosapm_init(void)
+{
+	int ret;
+
+	tosapm_device = platform_device_alloc("sharpsl-pm", -1);
+	if (!tosapm_device)
+		return -ENOMEM;
+
+	tosapm_device->dev.platform_data = &tosa_pm_machinfo;
+	ret = platform_device_add(tosapm_device);
+
+	if (ret)
+		platform_device_put(tosapm_device);
+
+	return ret;
+}
+
+static void tosapm_exit(void)
+{
+	int i;
+
+	// restore the resume / suspend handler
+	for(i=0;i<ARRAY_SIZE(dev_table);i++)
+	{
+		if (dev_table[i].driver)
+		{
+			dev_table[i].driver->resume = dev_table[i].resume;
+			dev_table[i].driver->suspend = dev_table[i].suspend;
+			dev_table[i].resume = NULL;
+			dev_table[i].suspend = NULL;
+			put_driver(dev_table[i].driver);
+		}
+	}
+
+	if (wm9712)
+		driver_unregister(&tosa_pm_driver);
+
+	platform_device_unregister(tosapm_device);
+}
+
+module_init(tosapm_init);
+module_exit(tosapm_exit);
Index: linux-2.6.17/arch/arm/mach-pxa/Kconfig
===================================================================
--- linux-2.6.17.orig/arch/arm/mach-pxa/Kconfig	2006-09-19 20:51:40.160810500 +0200
+++ linux-2.6.17/arch/arm/mach-pxa/Kconfig	2006-09-19 21:08:04.926354500 +0200
@@ -110,6 +110,7 @@ config MACH_TOSA
 	bool "Enable Sharp SL-6000x (Tosa) Support"
 	depends PXA_SHARPSL_25x
 	select TOSHIBA_TC6393XB
+	select SHARPSL_PM	
 
 config PXA25x
 	bool