1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
SECTION = "kernel"
DESCRIPTION = "handhelds.org Linux kernel 2.6 for PocketPCs and other consumer handheld devices."
LICENSE = "GPL"
COMPATIBLE_HOST = "arm.*-linux"
COMPATIBLE_MACHINE ?= '(asus620|asus730|aximx50|aximx50v|h1910|h2200|h3600|h3800|h3900|h4000|h5000|htcalpine|htcapache|htcblueangel|htchermes|htchimalaya|htcsable|htcuniversal|htcwallaby|hx4700|looxc550|jornada56x|magician|rx1950|rx3000)'
# SRC_URI *must* be overriden in includer, but this is a good reference
SRC_URI ?= "${HANDHELDS_CVS};module=linux/kernel26;tag=${@'K' + bb.data.getVar('PV',d,1).replace('.', '-')} \
file://24-hostap_cs_id.diff;patch=1 \
file://hrw-pcmcia-ids-r2.patch;patch=1 \
file://defconfig"
S = "${WORKDIR}/kernel26"
inherit kernel
K_MAJOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[0]}"
K_MINOR ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[1]}"
K_MICRO ?= "${@bb.data.getVar('PV',d,1).split('-')[0].split('.')[2]}"
HHV ?= "${@bb.data.getVar('PV',d,1).split('-')[1].split('hh')[-1]}"
KERNEL_PRIORITY = "${@'%d' % (int(bb.data.getVar('K_MAJOR',d,1)) * 100000000 + int(bb.data.getVar('K_MINOR',d,1)) * 1000000 + int(bb.data.getVar('K_MICRO',d,1)) * 10000 + float(bb.data.getVar('HHV',d,1)))}"
do_configure() {
if [ `grep EXTRAVERSION Makefile | grep hh | awk '{print $3}' | sed s/-hh//` != ${HHV} ]; then
die "-hh version mismatch"
fi
rm -f ${S}/.config
if [ ! -e ${WORKDIR}/defconfig ]; then
die "No default configuration for ${MACHINE} available."
fi
if [ "${TARGET_OS}" == "linux-gnueabi" -o "${TARGET_OS}" == "linux-uclibcgnueabi" ]; then
echo "CONFIG_AEABI=y" >> ${S}/.config
echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config
else
echo "# CONFIG_AEABI is not set" >> ${S}/.config
echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config
fi
sed -e '/CONFIG_AEABI/d' \
-e '/CONFIG_OABI_COMPAT=/d' \
'${WORKDIR}/defconfig' >>'${S}/.config'
yes '' | oe_runmake oldconfig
}
do_deploy() {
install -d ${DEPLOY_DIR_IMAGE}
install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}
#reflash.ctl is required to reflash using bootldr
# format:
# name file md5sumfile destination
echo "${MACHINE}-kernel-${DATETIME} ${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} - kernel" >> ${DEPLOY_DIR_IMAGE}/reflash.ctl
gen_haret_startup
}
do_deploy[dirs] = "${S}"
addtask deploy before do_package after do_install
gen_haret_startup() {
cat >${DEPLOY_DIR_IMAGE}/startup.txt <<EOF
# This is startup file for HaRET, Linux bootloader for WinCE
# http://handhelds.org/wiki/HaRET
set kernel "${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}"
# Boot choices. Uncomment 'set' statements in exactly one section
## Choice 1 - Boot from SD/MMC card
# Have 2 partition on a card:
# 1st - FAT with HaRET executable, this file and zImage above
# 2nd - EXT2 with rootfs tarball extracted
set cmdline "root=/dev/mmcblk0p2 rootdelay=10 console=ttyS0,115200n8 console=tty0"
## Choice 2 - Boot from CD card, setup like above
#set cmdline "root=/dev/hda2 rootdelay=10 console=ttyS0,115200n8 console=tty0"
## Choice 3 - Boot rootfs image as initramfs (works only for smaller images)
# have a cpio.gz file below together with zImage, no EXT2 partition required
#set initrd "<image>.rootfs.cpio.gz"
#set cmdline "rdinit=/sbin/init console=ttyS0,115200n8 console=tty0"
## Choice 4 - Boot via NFS over USB networking (must be kernel-builtin)
# 192.168.x.x - Server address (the other side)
# 192.168.x.x - Handheld's address
#set cmdline "root=/dev/nfs nfsroot=192.168.x.x:<nfs_path> ip=192.168.y.y:192.168.x.x:192.168.x.x:255.255.255.0:pda:usb0 console=ttyS0,115200n8 console=tty0"
bootlinux
EOF
}
|
