path: root/packages/linux/linux-h6300-omap1-2.6.16.16/linux-h6300-omap2-2.6.16.16.patch

diff -Naur linux-2.6.16.16/arch/arm/Kconfig h6300_dev/arch/arm/Kconfig
--- linux-2.6.16.16/arch/arm/Kconfig	2006-05-17 21:41:27.000000000 +0300
+++ h6300_dev/arch/arm/Kconfig	2006-04-02 00:23:01.000000000 +0300
@@ -811,6 +811,8 @@
 
 source "drivers/video/Kconfig"
 
+source "drivers/telephony/Kconfig"
+
 source "sound/Kconfig"
 
 source "drivers/usb/Kconfig"
diff -Naur linux-2.6.16.16/arch/arm/mach-omap1/board-h6300.c h6300_dev/arch/arm/mach-omap1/board-h6300.c
--- linux-2.6.16.16/arch/arm/mach-omap1/board-h6300.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/arch/arm/mach-omap1/board-h6300.c	2006-04-24 20:53:29.000000000 +0300
@@ -0,0 +1,424 @@
+/*
+ * Modified from board-h6300.c
+ *
+ * Code for generic OMAP board. Should work on many OMAP systems where
+ * the device drivers take care of all the necessary hardware initialization.
+ * Do not put any board specific code to this file; create a new machine
+ * type if you need custom low-level initializations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
+#include <asm/arch/h6300_uart_info.h>
+
+#define _h6300_KEY_CALENDAR	67 	// xmodmap 75 aka F9
+#define _H6300_KEY_TELEPHONE	68 	// xmodmap 76 aka F10
+#define _H6300_KEY_HOMEPAGE	87 	// xmodmap 87 aka Num_Lock
+#define _H6300_KEY_MAIL		88 	// xmodmap 88 aka Scroll_Lock
+
+/*
+ * Following 5 keypad events are not really sent to userspace. 
+ * Instead if the good combination of them is sent, then that is send.
+ * (up, right, down, left, enter)
+ */
+#define	_H6300_JOYPAD_UP_RIGHT		1	// 00001
+#define _H6300_JOYPAD_DOWN_RIGHT	2	// 00010
+#define _h6300_JOYPAD_DOWN_LEFT		4	// 00100
+#define _h6300_JOYPAD_UP_LEFT		8	// 01000
+#define _H6300_JOYPAD_KEY_OK		16	// 10000
+
+static int h6300_keymap[] = {
+	KEY(2, 0, _h6300_KEY_CALENDAR),		// address button in the bottom left	
+	KEY(2, 3, _H6300_KEY_TELEPHONE),	// start call button in the bottom
+	KEY(3, 1, _H6300_KEY_HOMEPAGE),		// stop call button in the bottom
+	KEY(3, 4, _H6300_KEY_MAIL),		// messaging button in the bottom right
+
+	KEY(0, 0, KEY_VOLUMEUP),	// volume up button in the right side
+	KEY(0, 1, KEY_VOLUMEDOWN),	// volume down button in the right side
+	KEY(3, 2, KEY_RECORD),		// record button in the left side
+	
+	KEY(1, 0, _h6300_JOYPAD_UP_LEFT),	
+	KEY(1, 1, _h6300_JOYPAD_DOWN_LEFT),	
+	KEY(1, 2, _H6300_JOYPAD_KEY_OK),		
+	KEY(1, 3, _H6300_JOYPAD_DOWN_RIGHT),
+	KEY(1, 4, _H6300_JOYPAD_UP_RIGHT),	
+	
+	KEY(4, 0, KEY_RIGHT),
+	KEY(4, 1, KEY_DOWN),
+	KEY(4, 2, KEY_LEFT),		
+	KEY(4, 3, KEY_UP),
+	KEY(4, 4, KEY_ENTER),
+
+	0
+};
+
+/*
+ * Bluetooth - Relies on h6300_bt module,
+ * so make the calls indirectly through pointers. Requires that the
+ * h6300_bt bluetooth module be loaded before any attempt to use
+ * bluetooth (obviously).
+ */
+
+static struct h6300_uart_funcs bt_funcs;
+static struct h6300_uart_funcs gsm_funcs;
+
+static void h6300_bt_configure(struct uart_omap_port *up, int enable)
+{
+	printk(KERN_NOTICE "board-h6300.c, h6300_bt_configure() started\n");
+	if (bt_funcs.configure != NULL)
+		bt_funcs.configure(up, enable);
+	printk(KERN_NOTICE "board-h6300.c, h6300_bt_configure() done\n");
+}
+
+static void h6300_bt_set_txrx(struct uart_omap_port *up, int txrx)
+{
+	printk(KERN_NOTICE "board-h6300.c, h6300_bt_set_txrx() started\n");
+	if (bt_funcs.set_txrx != NULL)
+	{
+		printk(KERN_NOTICE "board-h6300.c, h6300_bt_set_txrx(), bt_funcs.set_txrx != NULL\n");
+		bt_funcs.set_txrx(up, txrx);
+	}
+	printk(KERN_NOTICE "board-h6300.c, h6300_bt_set_txrx() done\n");
+}
+
+static int h6300_bt_get_txrx(struct uart_omap_port *up)
+{
+	int	retVal;
+	
+	printk(KERN_NOTICE "board-h6300.c, h6300_bt_get_txrx() started\n");
+	if (bt_funcs.get_txrx != NULL)
+	{
+		retVal	= bt_funcs.get_txrx(up);
+		printk(KERN_NOTICE "board-h6300.c, h6300_bt_get_txrx(), bt_funcs.get_trx != null, done, retVal %d\n", retVal);
+		return retVal;
+	}
+	else
+	{
+		printk(KERN_NOTICE "board-h6300.c, h6300_bt_get_txrx() done, returning 0\n");
+		return 0;
+	}
+}
+
+static struct platform_omap_serial_funcs h6300_omap_bt_funcs = {
+	.configure	= h6300_bt_configure,
+	.set_txrx	= h6300_bt_set_txrx,
+	.get_txrx	= h6300_bt_get_txrx,
+};
+
+struct platform_device btuart_device = {
+	.name	= "h6300_bt",
+	.id	= 1,
+};
+EXPORT_SYMBOL(btuart_device);
+
+static void h6300_gsm_configure(struct uart_omap_port *up, int enable)
+{
+	printk(KERN_NOTICE "board-h6300.c, h6300_gsm_configure() started\n");
+	if (gsm_funcs.configure != NULL)
+		gsm_funcs.configure(up, enable);
+	printk(KERN_NOTICE "board-h6300.c, h6300_gsm_configure() done\n");
+}
+
+static void h6300_gsm_set_txrx(struct uart_omap_port *up, int txrx)
+{
+	printk(KERN_NOTICE "board-h6300.c, h6300_gsm_set_txrx() started\n");
+	if (bt_funcs.set_txrx != NULL)
+	{
+		printk(KERN_NOTICE "board-h6300.c, h6300_gsm_set_txrx(), bt_funcs.set_txrx != NULL\n");
+		gsm_funcs.set_txrx(up, txrx);
+	}
+	printk(KERN_NOTICE "board-h6300.c, h6300_gsm_set_txrx() done\n");
+}
+
+static int h6300_gsm_get_txrx(struct uart_omap_port *up)
+{
+	int	retVal;
+	
+	printk(KERN_NOTICE "board-h6300.c, h6300_gsm_get_txrx() started\n");
+	if (bt_funcs.get_txrx != NULL)
+	{
+		retVal	= gsm_funcs.get_txrx(up);
+		printk(KERN_NOTICE "board-h6300.c, h6300_gsm_get_txrx(), bt_funcs.get_trx != null, done, retVal %d\n", retVal);
+		return retVal;
+	}
+	else
+	{
+		printk(KERN_NOTICE "board-h6300.c, h6300_gsm_get_txrx() done, returning 0\n");
+		return 0;
+	}
+}
+
+static struct platform_omap_serial_funcs h6300_omap_gsm_funcs = {
+	.configure	= h6300_gsm_configure,
+	.set_txrx	= h6300_gsm_set_txrx,
+	.get_txrx	= h6300_gsm_get_txrx,
+};
+
+struct platform_device gsmuart_device = {
+	.name	= "h6300_gsm",
+	.id	= 1,
+};
+EXPORT_SYMBOL(gsmuart_device);
+
+#if 0
+static struct mtd_partition h6300_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash1 is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
+	      .mask_flags	= 0
+	},
+	/* file system */
+	{
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct flash_platform_data h6300_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= h6300_partitions,
+	.nr_parts	= ARRAY_SIZE(h6300_partitions),
+};
+
+static struct resource h6300_flash_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device h6300_flash_device = {
+	.name	= "omapflash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &h6300_flash_data,
+	},
+static struct platform_device h6300_flash_device = {
+	.name	= "omapflash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &h6300_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &h6300_flash_resource,
+};
+#endif
+
+static struct resource h6300_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data h6300_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = h6300_keymap,
+	.rep	= 1,	// turns repeat bit on
+};
+
+static struct platform_device h6300_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &h6300_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(h6300_kp_resources),
+	.resource	= h6300_kp_resources,
+};
+
+static struct resource h6300_wlan_resource[] = {
+        [0] = {
+                .start          = OMAP_CS1_PHYS,
+                .end            = OMAP_CS1_PHYS + SZ_32M -1,
+                .flags          = IORESOURCE_MEM,
+        },
+
+        [1] = {
+                .start  = OMAP_GPIO_IRQ(11),
+                .end    = OMAP_GPIO_IRQ(11),
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device h6300_wlan_device = {
+        .name           = "tnetw1100b",
+        .id             = 0,
+        .num_resources  = 2,
+        .resource       = h6300_wlan_resource,
+};
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = { 
+	.spcr2	= 0x0000,
+	.spcr1	= 0x0000,
+	.rcr2	= 0x8041,
+	.rcr1	= 0x0040,
+	.xcr2	= 0x00a1,
+	.xcr1	= 0x00a0,
+	.srgr2	= 0xb000,
+	.srgr1	= 0x0000,
+	.pcr0	= 0x0081,
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name                   = "iPAQ h6300 TSC2101",
+	.mcbsp_regs_alsa        = &mcbsp_regs,
+	.codec_configure_dev    = NULL, //tsc2101_configure,
+	.codec_set_samplerate   = NULL, //tsc2101_set_samplerate,
+	.codec_clock_setup      = NULL, //tsc2101_clock_setup,
+	.codec_clock_on         = NULL, //tsc2101_clock_on,
+	.codec_clock_off        = NULL, //tsc2101_clock_off,
+	.get_default_samplerate = NULL, //tsc2101_get_default_samplerate,
+};
+
+static struct platform_device h6300_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+	.id	= 1,
+	.dev = {
+		.platform_data	= &alsa_config,
+	},
+};
+
+static struct platform_device h6300_lcd_device = {
+	.name	= "lcd_h6300",
+	.id	= -1,
+};
+
+static struct platform_device *h6300_devices[] __initdata = {
+	&h6300_lcd_device,
+	&btuart_device,
+	&gsmuart_device,
+	&h6300_kp_device,
+	&h6300_mcbsp1_device,
+	&h6300_wlan_device,
+	//&h6300_flash_device,
+};
+
+static void __init h6300_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+
+	/* this is now done in the drivers/input/touschreen/omap/ts_hx.c*/
+	//omap_request_gpio(2);
+	//omap_set_gpio_direction(2, 0);
+	//omap_set_gpio_dataout(2, 1);
+}
+
+/* assume no Mini-AB port */
+
+static struct omap_usb_config h6300_usb_config __initdata = {
+	.hmc_mode	= 0,
+	.register_dev	= 1,
+	.pins[0]	= 0,
+};
+
+static struct omap_lcd_config h6300_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_mmc_config h6300_mmc_config __initdata = {
+	.mmc [0] = {
+		.enabled 	= 1,
+		.wire4		= 1,
+		.wp_pin		= OMAP_GPIO_IRQ(13),
+		.power_pin	= -1, // tps65010 ?
+		.switch_pin	= -1, // OMAP_MPUIO(1),	// = -1, // ARMIO2?
+	},
+};
+
+static struct omap_uart_config h6300_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel h6300_config[] = {
+	{ OMAP_TAG_USB, 	&h6300_usb_config },
+	{ OMAP_TAG_MMC,		&h6300_mmc_config },
+	{ OMAP_TAG_UART,	&h6300_uart_config },
+	{ OMAP_TAG_LCD,		&h6300_lcd_config },
+};
+
+static void __init h6300_init(void)
+{
+	int ret;
+	
+	ret = platform_add_devices(h6300_devices, ARRAY_SIZE(h6300_devices));
+	if (ret) 
+	{
+		printk(KERN_WARNING "Unable to add h6300 platform devices like bluetooth");
+	}
+	omap_board_config	= h6300_config;
+	omap_board_config_size	= ARRAY_SIZE(h6300_config);
+	omap_serial_init();
+}
+
+static void __init h6300_map_io(void)
+{
+	omap1_map_common_io();
+	
+	btuart_device.dev.platform_data		= &h6300_omap_bt_funcs;
+	gsmuart_device.dev.platform_data	= &h6300_omap_gsm_funcs;
+}
+
+MACHINE_START(OMAP_H6300, "HP iPAQ h6300")
+	/* MAINTAINER("Everett Coleman II <gcc80x86@fuzzyneural.net>") */
+	.phys_io		= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io			= h6300_map_io,
+	.init_irq		= h6300_init_irq,
+	.init_machine	= h6300_init,
+	.timer			= &omap_timer,
+MACHINE_END
diff -Naur linux-2.6.16.16/arch/arm/mach-omap1/Kconfig h6300_dev/arch/arm/mach-omap1/Kconfig
--- linux-2.6.16.16/arch/arm/mach-omap1/Kconfig	2006-05-17 21:41:27.000000000 +0300
+++ h6300_dev/arch/arm/mach-omap1/Kconfig	2006-04-02 20:47:24.000000000 +0300
@@ -26,6 +26,15 @@
           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
           have such a board.
 
+config MACH_OMAP_H6300
+	bool "HP iPAQ h6300 series"
+	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select I2C
+	select PCA9535
+	help
+          HP iPAQ h6315, h6340 and h6365 devices that are based 
+          on the OMAP 1510. Say Y here if you have such a device.
+
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff -Naur linux-2.6.16.16/arch/arm/mach-omap1/Makefile h6300_dev/arch/arm/mach-omap1/Makefile
--- linux-2.6.16.16/arch/arm/mach-omap1/Makefile	2006-05-17 21:41:28.000000000 +0300
+++ h6300_dev/arch/arm/mach-omap1/Makefile	2006-04-02 00:23:01.000000000 +0300
@@ -23,6 +23,7 @@
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
+obj-$(CONFIG_MACH_OMAP_H6300)		+= board-h6300.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
@@ -36,4 +37,3 @@
 led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
 obj-$(CONFIG_LEDS)			+= $(led-y)
-
diff -Naur linux-2.6.16.16/arch/arm/mach-omap1/mux.c h6300_dev/arch/arm/mach-omap1/mux.c
--- linux-2.6.16.16/arch/arm/mach-omap1/mux.c	2006-05-17 21:41:28.000000000 +0300
+++ h6300_dev/arch/arm/mach-omap1/mux.c	2006-02-21 23:54:33.000000000 +0200
@@ -200,6 +200,13 @@
 MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
 MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
 
+/* OMAP-1510 uWire */
+MUX_CFG("P15_1510_UWIRE_CS3",  8,   12,    1,	 NA,   0,   0,  NA,  0,  1)
+MUX_CFG("N14_1510_UWIRE_CS0",  8,    9,    1,	 NA,   0,   0,  NA,  0,  1)
+MUX_CFG("V19_1510_UWIRE_SCLK", 8,    6,    0,	 NA,   0,   0,  NA,  0,  1)
+MUX_CFG("W21_1510_UWIRE_SDO",  8,    3,    0,	 NA,   0,   0,  NA,  0,  1)
+MUX_CFG("U18_1510_UWIRE_SDI",  8,    0,    0,	  1,  18,   0,  NA,  0,  1)
+
 /* OMAP-1610 Flash */
 MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
 MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
@@ -262,6 +269,7 @@
 MUX_CFG("T20_1610_LOW_PWR",	 7,   12,    1,	  NA,   0,   0,   NA,	 0,  0)
 
 /* MCLK Settings */
+MUX_CFG("R10_1510_MCLK_ON",	 B,   18,    0,	  2,   22,   1,   NA,	 1,  1)
 MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
 MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
 MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
diff -Naur linux-2.6.16.16/arch/arm/plat-omap/devices.c h6300_dev/arch/arm/plat-omap/devices.c
--- linux-2.6.16.16/arch/arm/plat-omap/devices.c	2006-05-17 21:41:28.000000000 +0300
+++ h6300_dev/arch/arm/plat-omap/devices.c	2006-05-18 00:59:02.000000000 +0300
@@ -92,7 +92,7 @@
 
 static void omap_init_kp(void)
 {
-	if (machine_is_omap_h2() || machine_is_omap_h3()) {
+	if (machine_is_omap_h2() || machine_is_omap_h3() || machine_is_omap_h6300()) {
 		omap_cfg_reg(F18_1610_KBC0);
 		omap_cfg_reg(D20_1610_KBC1);
 		omap_cfg_reg(D19_1610_KBC2);
diff -Naur linux-2.6.16.16/arch/arm/plat-omap/dma.c h6300_dev/arch/arm/plat-omap/dma.c
--- linux-2.6.16.16/arch/arm/plat-omap/dma.c	2006-05-17 21:41:28.000000000 +0300
+++ h6300_dev/arch/arm/plat-omap/dma.c	2006-02-06 15:36:21.000000000 +0200
@@ -30,6 +30,7 @@
 #include <asm/hardware.h>
 #include <asm/dma.h>
 #include <asm/io.h>
+#include <asm/mach-types.h>
 
 #include <asm/arch/tc.h>
 
@@ -1086,6 +1087,10 @@
 	}
 
 	if (omap_dma_in_1510_mode()) {
+		u16 l = omap_readw(OMAP1510_DMA_LCD_CTRL);
+		l &= ~(1 << 6);
+		omap_writew (l, OMAP1510_DMA_LCD_CTRL);
+
 		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
 		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
 		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
diff -Naur linux-2.6.16.16/arch/arm/tools/mach-types h6300_dev/arch/arm/tools/mach-types
--- linux-2.6.16.16/arch/arm/tools/mach-types	2006-05-11 04:56:24.000000000 +0300
+++ h6300_dev/arch/arm/tools/mach-types	2006-04-24 20:53:29.000000000 +0300
@@ -576,7 +576,7 @@
 s3c2460			MACH_S3C2460		S3C2460			560
 pdm			MACH_PDM		PDM			561
 h4700			MACH_H4700		H4700			562
-h6300			MACH_H6300		H6300			563
+omap_h6300		MACH_OMAP_H6300		OMAP_H6300		563
 rz1700			MACH_RZ1700		RZ1700			564
 a716			MACH_A716		A716			565
 estk2440a		MACH_ESTK2440A		ESTK2440A		566
diff -Naur linux-2.6.16.16/drivers/bluetooth/Kconfig h6300_dev/drivers/bluetooth/Kconfig
--- linux-2.6.16.16/drivers/bluetooth/Kconfig	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/bluetooth/Kconfig	2006-02-21 23:54:33.000000000 +0200
@@ -166,6 +166,16 @@
 
 	  Say Y here to compile support for virtual HCI devices into the
 	  kernel or say M to compile it as module (hci_vhci).
+	  
+config BT_H6300
+	tristate "H6300 BRF6100 BT DRIVER"
+	help
+	  Bluetooth H6300 BRF6100 driver.
+	  This driver provides the firmware loading mechanism for the BRF6100
+	  bt hardware in iPAQ h6300.
+
+	  Say Y here to compile support for BRF6100 BT devices into the
+	  kernel or say M to compile it as module (h6300_BT).	  
 
 endmenu
 
diff -Naur linux-2.6.16.16/drivers/bluetooth/Makefile h6300_dev/drivers/bluetooth/Makefile
--- linux-2.6.16.16/drivers/bluetooth/Makefile	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/bluetooth/Makefile	2006-02-21 23:54:33.000000000 +0200
@@ -13,6 +13,7 @@
 obj-$(CONFIG_BT_HCIBLUECARD)	+= bluecard_cs.o
 obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
 obj-$(CONFIG_BT_HCIBRF6150)	+= brf6150.o
+obj-$(CONFIG_BT_H6300)		+= omap/
 
 hci_uart-y				:= hci_ldisc.o
 hci_uart-$(CONFIG_BT_HCIUART_H4)	+= hci_h4.o
diff -Naur linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_brf6100.c h6300_dev/drivers/bluetooth/omap/h6300_bt_brf6100.c
--- linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_brf6100.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/bluetooth/omap/h6300_bt_brf6100.c	2006-01-23 00:09:23.000000000 +0200
@@ -0,0 +1,154 @@
+/* 
+ * Bluetooth interface driver for TI BRF6100 on h6300
+ * 
+ * Copyright (C) 2005 Mika Laitio <lamikr@cc.jyu.fi>
+ * Ideas taken from the brf6150 bt driver made by Todd Blumer for the pxa hx4700.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/arch/h6300_uart_info.h>
+#include "h6300_bt_led.h"
+
+static void
+h6300_bt_configure(struct uart_omap_port *up, int enable)
+{
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_configure() started, enable = %d\n", enable);
+	
+	// printk( KERN_NOTICE "h6300 configure bluetooth: %d\n", enable );
+	if (enable == 0) {
+		omap_set_gpio_dataout(GPIO_N_BT_RST, 1);	// turn off gpio, note 1 == off for negative gpios
+		mdelay(5);
+		h6300_clear_led(INDEX_BT_LED);
+	}
+	else if (enable == 1) {
+		omap_set_gpio_dataout(GPIO_N_BT_RST, 1);	// turn on gpio, note 0 == on for negative gpios
+		mdelay(5);				
+	}
+	else if (enable == 2) {
+		/*
+		 * BRF6150's RTS goes low when firmware is ready
+		 * so check for CTS=1 (nCTS=0 -> CTS=1). Typical 150ms
+		 */
+/*		
+		int tries = 0; 
+		do 
+		{
+			mdelay(10);
+		} 
+		while ((BTMSR & MSR_CTS) == 0 && tries++ < 50);
+*/				
+		h6300_set_led(INDEX_BT_LED, 16, 16);
+	}
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_configure() done\n");
+}
+
+static void
+h6300_bt_set_txrx(struct uart_omap_port *up, int txrx)
+{
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_set_txrx(), txrx = %d done\n", txrx);
+	/* do nothing */
+}
+
+static int
+h6300_bt_get_txrx(struct uart_omap_port *up)
+{
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_get_txrx() done\n");
+	/* do nothing */
+	return 0;
+}
+
+static int
+h6300_bt_probe(struct platform_device *pdev)
+{
+	struct h6300_uart_funcs *funcs = (struct h6300_uart_funcs *)pdev->dev.platform_data;
+
+	omap_request_gpio(GPIO_BT_PWR_EN);		// ask bt_power_en gpio, remember to release in remove_function
+	omap_set_gpio_direction(GPIO_BT_PWR_EN, 1);	// set gpio direction to be output
+	omap_set_gpio_dataout(GPIO_BT_PWR_EN, 1);	// turn on gpio
+
+	mdelay(200);
+
+	omap_request_gpio(GPIO_N_BT_RST);		// ask bt_reset gpio, remember to release in remove_function
+	omap_set_gpio_direction(GPIO_N_BT_RST, 1);	// set gpio direction to be output
+	omap_set_gpio_dataout(GPIO_N_BT_RST, 0);	// turn on gpio, note 0 == on for negative gpios
+	
+	/* configure bluetooth UART */
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_RXD_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_TXD_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_UART_CTS_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_UART_RTS_MD);
+
+	funcs->configure	= h6300_bt_configure;
+	funcs->set_txrx		= h6300_bt_set_txrx;
+	funcs->get_txrx		= h6300_bt_get_txrx;
+
+	/* Make sure the LED is off */
+	h6300_clear_led(INDEX_BT_LED);
+	
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_probe() done\n");	
+
+	return 0;
+}
+
+static int
+h6300_bt_remove(struct platform_device *pdev)
+{
+	struct h6300_uart_funcs *funcs = (struct h6300_uart_funcs *)pdev->dev.platform_data;
+	
+	printk(KERN_NOTICE "h6300_bt_brf6100.c h6300_bt_remove() started\n");	
+	
+	omap_free_gpio(GPIO_BT_PWR_EN);
+	omap_free_gpio(GPIO_N_BT_RST);
+
+	funcs->configure	= NULL;
+	funcs->set_txrx		= NULL;
+	funcs->get_txrx		= NULL;
+
+	/* Make sure the LED is off */
+	h6300_clear_led(INDEX_BT_LED);
+	
+	printk(KERN_NOTICE "h6300_bt_brf6100.c, h6300_bt_remove() done\n");
+
+	return 0;
+}
+
+static struct platform_driver bt_driver = {
+	.probe    = h6300_bt_probe,
+	.remove   = h6300_bt_remove,
+	.driver = {
+		.name =	"h6300_bt",
+	},
+};
+
+static int __init
+h6300_bt_init(void)
+{
+	printk(KERN_NOTICE "h6300 Bluetooth Driver init()\n");
+	return platform_driver_register(&bt_driver);
+}
+
+static void __exit
+h6300_bt_exit(void)
+{
+	printk(KERN_NOTICE "h6300 Bluetooth Driver exit()\n");
+	platform_driver_unregister(&bt_driver);
+}
+
+module_init(h6300_bt_init);
+module_exit(h6300_bt_exit);
+
+MODULE_AUTHOR("Mika Laitio, <lamikr@cc.jyu.fi>");
+MODULE_DESCRIPTION("iPAQ h6300 BRF6100 Bluetooth driver.");
+MODULE_LICENSE("GPL");
+
diff -Naur linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_led.c h6300_dev/drivers/bluetooth/omap/h6300_bt_led.c
--- linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_led.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/bluetooth/omap/h6300_bt_led.c	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,41 @@
+/* 
+ * Bluetooth interface driver helper for controlling bluetooth leds available in iPAQ h6300.
+ * 
+ * Copyright (C) 2005 Mika Laitio  <lamikr@cc.jyu.fi>
+ * Ideas from the brf6150 bt driver made by Todd Blumer for the pxa hx4700.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+
+/* 
+ * Low level access for disabling h6300 bt led.
+ *
+ * TODO: implement for h6300 
+ */
+void h6300_clear_led(int led_num)
+{
+	printk(KERN_NOTICE "h6300_bt_led.c h6300_clear_led() done\n");
+	//hx4700_set_led(led_num, 0, 16);
+}
+EXPORT_SYMBOL(h6300_clear_led);
+
+/* 
+ * Low level access for setting up the bt led.
+ *
+ * TODO: implement for h6300 
+ */
+void h6300_set_led(int led_num, int duty_time, int cycle_time)
+{
+	printk(KERN_NOTICE "h6300_bt_led.c h6300_set_led() done\n");
+}
+EXPORT_SYMBOL(h6300_set_led);
diff -Naur linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_led.h h6300_dev/drivers/bluetooth/omap/h6300_bt_led.h
--- linux-2.6.16.16/drivers/bluetooth/omap/h6300_bt_led.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/bluetooth/omap/h6300_bt_led.h	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,9 @@
+#ifndef H6300_BT_LED_H_
+#define H6300_BT_LED_H_
+
+#define INDEX_BT_LED	2
+
+void h6300_clear_led(int led_num);
+void h6300_set_led(int led_num, int duty_time, int cycle_time);
+
+#endif /*H6300_BT_LED_H_*/
diff -Naur linux-2.6.16.16/drivers/bluetooth/omap/Makefile h6300_dev/drivers/bluetooth/omap/Makefile
--- linux-2.6.16.16/drivers/bluetooth/omap/Makefile	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/bluetooth/omap/Makefile	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux iPAQ H6300 BRF6100 Bluetooth device drivers.
+#
+
+h6300_bt-objs				:= h6300_bt_led.o h6300_bt_brf6100.o
+obj-$(CONFIG_BT_H6300)		+= h6300_bt.o
diff -Naur linux-2.6.16.16/drivers/i2c/busses/i2c-omap.c h6300_dev/drivers/i2c/busses/i2c-omap.c
--- linux-2.6.16.16/drivers/i2c/busses/i2c-omap.c	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/i2c/busses/i2c-omap.c	2006-04-02 00:23:01.000000000 +0300
@@ -163,17 +163,22 @@
 
 static int omap_i2c_get_clocks(struct omap_i2c_dev *dev)
 {
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap24xx()) {
 		dev->iclk = clk_get(dev->dev, "i2c_ick");
-		if (IS_ERR(dev->iclk))
+		if (IS_ERR(dev->iclk)) {
 			return -ENODEV;
+		}
+		dev->fclk = clk_get(dev->dev, "i2c_fck");
+		if (IS_ERR(dev->fclk)) {
+			clk_put(dev->fclk);
+			return -ENODEV;
+		}
 	}
 
-	dev->fclk = clk_get(dev->dev, "i2c_fck");
-	if (IS_ERR(dev->fclk)) {
-		if (dev->iclk != NULL)
-			clk_put(dev->iclk);
-		return -ENODEV;
+	if (cpu_class_is_omap1()) {
+		dev->fclk = clk_get(dev->dev, "i2c_fck");
+		if (IS_ERR(dev->fclk))
+			return -ENODEV;
 	}
 
 	return 0;
diff -Naur linux-2.6.16.16/drivers/i2c/chips/Kconfig h6300_dev/drivers/i2c/chips/Kconfig
--- linux-2.6.16.16/drivers/i2c/chips/Kconfig	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/i2c/chips/Kconfig	2006-04-24 20:53:29.000000000 +0300
@@ -46,6 +46,16 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called pcf8574.
 
+config PCA9535
+        tristate "Philips PCA9535 16-bit I/O port"
+        depends on I2C 
+        help
+          If you say yes here you get support for the Philips PCA9535
+          16-bit I/O port.
+	
+          This driver can also be built as a module.  If so, the module
+          will be called pca9535.
+
 config SENSORS_PCA9539
 	tristate "Philips PCA9539 16-bit I/O port"
 	depends on I2C && EXPERIMENTAL
diff -Naur linux-2.6.16.16/drivers/i2c/chips/Makefile h6300_dev/drivers/i2c/chips/Makefile
--- linux-2.6.16.16/drivers/i2c/chips/Makefile	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/i2c/chips/Makefile	2006-04-24 20:53:29.000000000 +0300
@@ -7,6 +7,7 @@
 obj-$(CONFIG_SENSORS_EEPROM)	+= eeprom.o
 obj-$(CONFIG_SENSORS_MAX6875)	+= max6875.o
 obj-$(CONFIG_SENSORS_M41T00)	+= m41t00.o
+obj-$(CONFIG_PCA9535)   		+= pca9535.o
 obj-$(CONFIG_SENSORS_PCA9539)	+= pca9539.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
diff -Naur linux-2.6.16.16/drivers/i2c/chips/pca9535.c h6300_dev/drivers/i2c/chips/pca9535.c
--- linux-2.6.16.16/drivers/i2c/chips/pca9535.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/i2c/chips/pca9535.c	2006-04-24 20:53:29.000000000 +0300
@@ -0,0 +1,412 @@
+/*
+    Driver for Philips PCA9535 16-bit low power I/O port with interrupt
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+    
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+    
+    Copyright (C) 2005 Husam Senussi
+    Framework based on Pawel Kolodziejski's pca9535 driver in 
+    handheld.org's 2.6.13 kernel. Driver updated by Mika Laitio.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+
+#include <asm/arch/pca9535.h>
+#include <linux/delay.h>
+
+#include <linux/interrupt.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware.h>
+
+EXPORT_SYMBOL(pca9535_gpio_read);
+EXPORT_SYMBOL(pca9535_gpio_write);
+EXPORT_SYMBOL(pca9535_gpio_direction);
+
+static int pca9535_attach_adapter(struct i2c_adapter *adapter);
+static int pca9535_detach_client(struct i2c_client *client);
+static int pca9535_attach(struct i2c_adapter *adapter, int address, int zero_or_minus_one);
+static u32 pca9535_read_reg(struct i2c_client *client, u8 regaddr);
+static void pca9535_write_reg(struct i2c_client *client, u8 regaddr, u16 param);
+
+enum pca9535_cmd
+{
+        PCA9535_INPUT_0         = 0,
+        PCA9535_INPUT_1         = 1,
+        PCA9535_OUTPUT_0        = 2,
+        PCA9535_OUTPUT_1        = 3,
+        PCA9535_INVERT_0        = 4,
+        PCA9535_INVERT_1        = 5,
+        PCA9535_DIRECTION_0     = 6,
+        PCA9535_DIRECTION_1     = 7,
+};
+
+struct pca9535_data {
+	struct semaphore  lock;
+        struct i2c_client client;
+};
+
+static struct i2c_driver pca9535_driver = {
+        .driver = {
+                .name   = "pca9535",
+        },
+	.attach_adapter		= pca9535_attach_adapter,
+	.detach_client		= pca9535_detach_client,
+};
+
+static struct i2c_client   *pca9535_i2c_client = NULL;
+static struct pca9535_data pca9535_inited;
+
+static unsigned short normal_i2c[] = { 0x20, I2C_CLIENT_END };
+
+#define DRIVER_VERSION  "20 OCT 2005"
+#define DRIVER_NAME     "PCA9535"
+
+/* 
+ * sysfs callback function.
+ */ 
+static ssize_t pca9535_show(struct device *dev, struct device_attribute *attr,
+                            char *buf)
+{
+        struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        return sprintf(buf, "%02X\n", (pca9535_read_reg(client, psa->index) >> 8));
+}
+
+/* 
+ * sysfs callback function.
+ */ 
+static ssize_t pca9535_store(struct device *dev, struct device_attribute *attr,
+                             const char *buf, size_t count)
+{
+        struct sensor_device_attribute *psa = to_sensor_dev_attr(attr);
+        struct i2c_client *client = to_i2c_client(dev);
+        unsigned long val = simple_strtoul(buf, NULL, 0);
+	unsigned long old = pca9535_read_reg(client, psa->index);
+
+        if (val > 0xff)
+                return -EINVAL;
+	
+	val = (old & 0xff) | (val << 8);
+        pca9535_write_reg(client, psa->index, val);
+        return count;
+}
+
+#define PCA9535_ENTRY_RO(name, cmd_idx) \
+        static SENSOR_DEVICE_ATTR(name, S_IRUGO, pca9535_show, NULL, cmd_idx)
+
+#define PCA9535_ENTRY_RW(name, cmd_idx) \
+        static SENSOR_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, pca9535_show, \
+                                  pca9535_store, cmd_idx)
+
+PCA9535_ENTRY_RO(input0, PCA9535_INPUT_0);
+PCA9535_ENTRY_RO(input1, PCA9535_INPUT_1);
+PCA9535_ENTRY_RW(output0, PCA9535_OUTPUT_0);
+PCA9535_ENTRY_RW(output1, PCA9535_OUTPUT_1);
+PCA9535_ENTRY_RW(invert0, PCA9535_INVERT_0);
+PCA9535_ENTRY_RW(invert1, PCA9535_INVERT_1);
+PCA9535_ENTRY_RW(direction0, PCA9535_DIRECTION_0);
+PCA9535_ENTRY_RW(direction1, PCA9535_DIRECTION_1);
+
+static struct attribute *pca9535_attributes[] = {
+        &sensor_dev_attr_input0.dev_attr.attr,
+        &sensor_dev_attr_input1.dev_attr.attr,
+        &sensor_dev_attr_output0.dev_attr.attr,
+        &sensor_dev_attr_output1.dev_attr.attr,
+        &sensor_dev_attr_invert0.dev_attr.attr,
+        &sensor_dev_attr_invert1.dev_attr.attr,
+        &sensor_dev_attr_direction0.dev_attr.attr,
+        &sensor_dev_attr_direction1.dev_attr.attr,
+        NULL
+};
+
+static struct attribute_group pca9535_defattr_group = {
+        .attrs = pca9535_attributes,
+};
+//End of sysfs management code. 
+
+I2C_CLIENT_INSMOD;
+
+u32 pca9535_read_input(void)
+{
+	return pca9535_read_reg(pca9535_i2c_client, 0);
+}
+EXPORT_SYMBOL(pca9535_read_input);
+
+void pca9535_write_output(u16 param)
+{
+	pca9535_write_reg(pca9535_i2c_client, 2, param);
+}
+EXPORT_SYMBOL(pca9535_write_output);
+
+void pca9535_set_dir(u16 param)
+{
+	pca9535_write_reg(pca9535_i2c_client, 6, param);
+}
+EXPORT_SYMBOL(pca9535_set_dir);
+
+static int pca9535_attach_adapter(struct i2c_adapter *adapter)
+{
+	return i2c_probe(adapter, &addr_data, pca9535_attach);
+}
+
+static int pca9535_attach(struct i2c_adapter *adapter, int address, int zero_or_minus_one)
+{
+	struct i2c_client *new_client;
+	int err = 0;
+
+	new_client = &(pca9535_inited.client);
+	i2c_set_clientdata(new_client, 0);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &pca9535_driver;
+	strcpy(new_client->name, DRIVER_NAME);
+
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	pca9535_i2c_client = new_client;
+	
+	init_MUTEX(&pca9535_inited.lock);
+	i2c_set_clientdata(pca9535_i2c_client, &pca9535_inited);
+	
+	sysfs_create_group(&pca9535_i2c_client->dev.kobj, &pca9535_defattr_group);
+	
+	printk("pca9535_attach() ok, address = %d, zero_or_minus_one = %d\n", address, zero_or_minus_one);
+	return 0;
+
+exit_free:
+	printk("pca9535_attach() failed, error code = %d\n", err);
+	return err;
+}
+
+static int pca9535_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
+		return err;
+	}
+	pca9535_i2c_client = NULL;
+
+	return 0;
+}
+
+static int __init pca9535_init(void)
+{
+	return i2c_add_driver(&pca9535_driver);
+}
+
+static void __exit pca9535_exit(void)
+{
+        i2c_del_driver(&pca9535_driver);
+}
+
+/* 
+ * Reads the value of GPIO available via I2C.
+ */
+int pca9535_gpio_read(int gpio){
+	unsigned char reg = 0;
+	unsigned long val = 0;
+
+	printk("9535_gpio_read() called\n");
+	if(!pca9535_i2c_client)
+		return -ENODEV;
+
+	if(gpio < GPIO0 || gpio > GPIO17)
+		return -EINVAL;
+
+	if(gpio >= GPIO0 && gpio <= GPIO7){
+		reg   	 = PCA9535_INPUT_0;
+		gpio	-= GPIO0;
+	}else if(gpio >= GPIO8 && gpio <= GPIO17){
+		reg    	 = PCA9535_INPUT_1;
+                gpio    -= GPIO8;
+	}
+
+	down(&pca9535_inited.lock);
+
+	// Read the existing values first
+	val = pca9535_read_reg(pca9535_i2c_client, reg) >> 8;
+	val = (val >> gpio) & 0x01;
+
+	up(&pca9535_inited.lock);
+
+	return val;
+}
+
+/* 
+ * Set the value of I2C GPIO.
+ */
+int pca9535_gpio_write(int gpio, unsigned char value){
+	unsigned char in_reg  = 0;
+        unsigned char out_reg = 0;
+        unsigned long val = 0;
+	unsigned long old = 0;
+	int	      ret = 0;
+
+        if(!pca9535_i2c_client)
+                return -ENODEV;
+
+        if(gpio < GPIO0 || gpio > GPIO17)
+                return -EINVAL;
+
+        if(gpio >= GPIO0 && gpio <= GPIO7){
+                in_reg   = PCA9535_INPUT_0;
+                out_reg  = PCA9535_OUTPUT_0;
+                gpio    -= GPIO0;
+        }else if(gpio >= GPIO8 && gpio <= GPIO17){
+                in_reg   = PCA9535_INPUT_1;
+                out_reg  = PCA9535_OUTPUT_1;
+                gpio    -= GPIO8;
+        }
+
+	down(&pca9535_inited.lock);
+
+        // Read the existing values first
+        val = pca9535_read_reg(pca9535_i2c_client, in_reg);
+	old = val >> 8;
+
+	switch(value){
+	case LOW:
+		old |= (1 << gpio);
+		break;
+	case HI:
+		old &= ~(1 << gpio);
+		break;
+	default:
+		ret = -EINVAL;
+		goto error;
+	}
+
+	val = (val & 0xff) | (old << 8);	
+
+	// write the values back to the register
+	pca9535_write_reg(pca9535_i2c_client, out_reg, val);
+error:
+
+	up(&pca9535_inited.lock);
+	return ret;
+}
+
+/*
+ * Set the direction of I2C GPIO.
+ */ 
+int pca9535_gpio_direction(int gpio, unsigned char direction){
+        unsigned char reg = 0;
+        unsigned long val = 0;
+	unsigned long old = 0;
+        int           ret = 0;
+
+        if(!pca9535_i2c_client)
+                return -ENODEV;
+
+        if(gpio < GPIO0 || gpio > GPIO17)
+                return -EINVAL;
+
+        if(gpio >= GPIO0 && gpio <= GPIO7){
+                reg   	 = PCA9535_DIRECTION_0;
+                gpio    -= GPIO0;
+        }else if(gpio >= GPIO8 && gpio <= GPIO17){
+                reg   	 = PCA9535_DIRECTION_1;
+                gpio    -= GPIO8;
+        }
+
+        down(&pca9535_inited.lock);
+
+        // Read the existing values first
+        old = pca9535_read_reg(pca9535_i2c_client, reg);
+	val = old >> 8;
+
+        switch(direction){
+        case GPIO_INPUT: 
+                val |= (1 << gpio);
+                break;
+        case GPIO_OUTPUT: 
+                val &= ~(1 << gpio);
+                break;
+        default:
+                ret = -EINVAL;
+                goto error;
+        }
+
+	val = (old & 0xff) | (val << 8);
+
+        // write the values back to the register
+        pca9535_write_reg(pca9535_i2c_client, reg, val);
+error:
+
+        up(&pca9535_inited.lock);
+        return ret;
+}
+
+static u32 pca9535_read_reg(struct i2c_client *client, u8 regaddr)
+{
+	char buffer[3];
+	int r;
+	u32 data;
+
+	buffer[0] = regaddr;
+	buffer[1] = 0;
+	buffer[2] = 0;
+
+	r = i2c_master_send(client, buffer, 1);
+	if (r != 1) {
+		printk(KERN_ERR "pca9535: read failed, status %d\n", r);
+		return 0xffffffff;
+	}
+
+	r = i2c_master_recv(client, buffer, 3);
+	if (r != 3) {
+		printk(KERN_ERR "pca9535: read failed, status %d\n", r);
+		return 0xffffffff;
+	}
+
+	data = buffer[1];
+	data |= buffer[2] << 8;
+	//printk(KERN_ERR "%s: reading %x in %x\n", __FUNCTION__, data, regaddr);
+
+	return data;
+}
+
+static void pca9535_write_reg(struct i2c_client *client, u8 regaddr, u16 data)
+{
+	char buffer[3];
+	int r;
+
+	//printk(KERN_ERR "%s: writing %x in %x\n", __FUNCTION__, data, regaddr);
+	buffer[0] = regaddr;
+	buffer[1] = data >> 8;
+	buffer[2] = data & 0xff;
+
+	r = i2c_master_send(client, buffer, 3);
+	if (r != 3) {
+		printk(KERN_ERR "pca9535: write failed, status %d\n", r);
+	}
+}
+
+MODULE_AUTHOR("Husam Senussi <husamsenussi@gmail.com>");
+MODULE_DESCRIPTION("PCA9535 driver");
+MODULE_LICENSE("GPL");
+
+module_init(pca9535_init);
+module_exit(pca9535_exit);
diff -Naur linux-2.6.16.16/drivers/input/keyboard/omap-keypad.c h6300_dev/drivers/input/keyboard/omap-keypad.c
--- linux-2.6.16.16/drivers/input/keyboard/omap-keypad.c	2006-05-17 21:41:29.000000000 +0300
+++ h6300_dev/drivers/input/keyboard/omap-keypad.c	2006-04-24 20:53:29.000000000 +0300
@@ -4,11 +4,12 @@
  * OMAP Keypad Driver
  *
  * Copyright (C) 2003 Nokia Corporation
- * Written by Timo Teräs <ext-timo.teras@nokia.com>
+ * Written by Timo Ter�s <ext-timo.teras@nokia.com>
+ * iPAQ h6300 key and joypad support added by Mika Laitio. (2005)
  *
  * Added support for H2 & H3 Keypad
  * Copyright (C) 2004 Texas Instruments
- *
+ * 
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -44,6 +45,19 @@
 #include <asm/arch/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
+//#define NEW_BOARD_LEARNING_MODE 1
+
+/*
+ * Following 5 keypad events are not really sent to userspace. 
+ * Instead if the good combination of them is sent, then that is send.
+ * (up, right, down, left, enter)
+ */
+#define	_H6300_JOYPAD_UP_RIGHT		1	// 00001
+#define _H6300_JOYPAD_DOWN_RIGHT	2	// 00010
+#define _h6300_JOYPAD_DOWN_LEFT		4	// 00100
+#define _h6300_JOYPAD_UP_LEFT		8	// 01000
+#define _H6300_JOYPAD_KEY_OK		16	// 10000
+#define _H6300_JOYPAD_REPORT_COLUMN	4
 
 static void omap_kp_tasklet(unsigned long);
 static void omap_kp_timer(unsigned long);
@@ -53,6 +67,8 @@
 static int kp_enable = 1;
 static int kp_cur_group = -1;
 
+static int prevJoypadKeycodePressEmulated;
+
 struct omap_kp {
 	struct input_dev *input;
 	struct timer_list timer;
@@ -139,7 +155,7 @@
 		for (col = 0; col < omap_kp->cols; col++) {
 			omap_writew(~(1 << col) & 0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC);
 
-			if (machine_is_omap_osk() || machine_is_omap_h2() || machine_is_omap_h3()) {
+			if (machine_is_omap_osk() || machine_is_omap_h2() || machine_is_omap_h3() || machine_is_omap_h6300()) {
 				udelay(9);
 			} else {
 				udelay(4);
@@ -169,17 +185,26 @@
 	return -1;
 }
 
+int is_key_down(unsigned char new_state[],
+		int col,
+		int row)
+{
+	return (new_state[col] & (1 << row)) ? 1 : 0;
+}
+
 static void omap_kp_tasklet(unsigned long data)
 {
 	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
 	unsigned char new_state[8], changed, key_down = 0;
 	int col, row;
 	int spurious = 0;
+	int report_key, report_col, report_row, joypad_checked;	// h6300-joypad specific variables
 
 	/* check for any changes */
 	omap_kp_scan_keypad(omap_kp_data, new_state);
 
 	/* check for changes and print those */
+	joypad_checked	= 0;
 	for (col = 0; col < omap_kp_data->cols; col++) {
 		changed = new_state[col] ^ keypad_state[col];
 		key_down |= new_state[col];
@@ -201,14 +226,177 @@
 				spurious = 1;
 				continue;
 			}
-
-			if (!(kp_cur_group == (key & GROUP_MASK) ||
-			      kp_cur_group == -1))
-				continue;
-
-			kp_cur_group = key & GROUP_MASK;
-			input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
-					 !!(new_state[col] & (1 << row)));
+ 			if (machine_is_omap_h6300() && 
+ 			   ((col == 1) || (col == _H6300_JOYPAD_REPORT_COLUMN)))
+ 			{
+ 				if (col == _H6300_JOYPAD_REPORT_COLUMN)
+ 				{
+ 					continue;
+ 				}
+ 				if ((joypad_checked == 0) &&
+ 				    ((key == _H6300_JOYPAD_KEY_OK) ||
+ 				     (key == _h6300_JOYPAD_UP_LEFT) ||
+ 	    			     (key == _H6300_JOYPAD_UP_RIGHT) ||
+ 				     (key == _H6300_JOYPAD_DOWN_RIGHT) ||
+ 				     (key == _h6300_JOYPAD_DOWN_LEFT)))
+ 				{
+ 					if (is_key_down(new_state, col, row))
+ 					{
+ 						/*
+ 						 * only enter pressed
+ 						 * 1 0 0 _H6300_JOYPAD_KEY_OK 0 0
+ 						 * --> 100100 == 36
+ 						 */
+ 						 if (new_state[1] == 36)
+ 						 {
+ 						 	joypad_checked	= 1;
+ 							prevJoypadKeycodePressEmulated	= KEY_ENTER;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 48;	//110000
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							report_row	= 4;
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 						 }						
+ 						/*
+ 						 * enter, up_left and up_right sensors pressed.
+ 						 * 1 _H6300_JOYPAD_UP_RIGHT 0 _H6300_JOYPAD_KEY_OK 0 _h6300_JOYPAD_UP_LEFT
+ 						 * --> 110101 == 53
+ 						 * OR
+ 						 * 1 KEY_UP_RIGHT 0 0 0 _h6300_JOYPAD_UP_LEFT
+ 						 * --> 110001 == 42
+ 						 * --> move to up
+ 						 */
+ 						else if ((new_state[1] == 53) ||
+ 						         (new_state[1] == 49))
+ 						{
+ 							joypad_checked	= 1;
+ 							prevJoypadKeycodePressEmulated	= KEY_UP;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 40;	//101000
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							report_row	= 3;
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 						}
+ 						/*
+ 						 * enter, down_left and down_right sensors pressed
+ 						 * --> 101110 == 46
+ 						 * OR
+ 						 * down_left and down_right
+ 						 * -->101010 == 42
+ 						 * --> move to down
+ 						 */
+ 						else if ((new_state[1] == 46) ||
+ 							 (new_state[1] == 42))
+ 						{
+ 							joypad_checked	= 1;
+ 							prevJoypadKeycodePressEmulated	= KEY_DOWN;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 34;	//100010
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							report_row	= 1;
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 						}												
+ 						/*
+ 						 * enter, up_right and down_right sensors pressed
+ 						 * --> 111100 == 60
+ 						 * or
+ 						 * down_right and up_right
+ 						 * --> 111000 == 56
+ 						 * --> move to right
+ 						 */
+ 						else if ((new_state[1] == 60) ||
+ 							 (new_state[1] == 56))
+ 						{
+ 							joypad_checked	= 1;
+ 							prevJoypadKeycodePressEmulated	= KEY_RIGHT;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 33;	//100001
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							report_row	= 0;
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 						}
+ 						/*
+ 						 * enter, up_left and down_left sensors pressed
+ 						 * --> 100111 == 39
+ 						 * or up_left and down_left
+ 						 * --> 100011 == 35
+ 						 * --> move to left
+ 						 */
+ 						else if ((new_state[1] == 39) ||
+ 							 (new_state[1] == 35))
+ 						{
+ 							joypad_checked	= 1;
+ 							prevJoypadKeycodePressEmulated	= KEY_LEFT;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 36;	//100100
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							report_row	= 2;
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 						}
+ 						else
+ 						{
+ 							//printk("missed new_state = %d\n", new_state[1]);
+ 						}
+ 					}
+ 					else
+ 					{
+ 						if (prevJoypadKeycodePressEmulated != 0)
+ 						{
+ 							// report key up event
+ 							joypad_checked	= 1;
+ 							new_state[_H6300_JOYPAD_REPORT_COLUMN]	= 32;	//100000
+ 							report_key	= prevJoypadKeycodePressEmulated;
+ 							report_col	= _H6300_JOYPAD_REPORT_COLUMN;
+ 							switch(prevJoypadKeycodePressEmulated)
+ 							{
+ 								case KEY_RIGHT:
+									report_row	= 0;
+ 									break;
+ 								case KEY_DOWN:
+ 									report_row	= 1;
+ 									break;
+ 								case KEY_LEFT:
+ 									report_row	= 2;
+ 									break;
+ 								case KEY_UP:
+ 									report_row	= 3;
+ 									break;
+ 								case KEY_ENTER:
+ 									report_row	= 4;
+ 									break;
+ 								default:
+ 									printk(KERN_WARNING "Unknown iPAQ h6300 column 1 key = %d released. This should newer happen!\n",
+ 										key);
+ 									report_row	= 0;
+ 							}
+ 							input_report_key(omap_kp_data->input,
+ 									report_key,
+ 							 		new_state[report_col] & (1 << report_row));
+ 							prevJoypadKeycodePressEmulated	= 0;
+ 						}
+ 					}
+ 				}
+ 			}
+ 			else
+ 			{
+				if (!(kp_cur_group == (key & GROUP_MASK) ||
+				      kp_cur_group == -1))
+					continue;
+
+				kp_cur_group = key & GROUP_MASK;
+				input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
+						 !!(new_state[col] & (1 << row)));
+ 			}
 #endif
 		}
 	}
@@ -348,10 +536,11 @@
 			omap_set_gpio_direction(row_gpios[i], 1);
 		}
 	}
+	prevJoypadKeycodePressEmulated		= 0;
 
 	init_timer(&omap_kp->timer);
 	omap_kp->timer.function = omap_kp_timer;
-	omap_kp->timer.data = (unsigned long) omap_kp;
+	omap_kp->timer.data = (unsigned long)omap_kp;
 
 	/* get the irq and init timer*/
 	tasklet_enable(&kp_tasklet);
@@ -376,7 +565,7 @@
 	input_register_device(omap_kp->input);
 
 	if (machine_is_omap_h2() || machine_is_omap_h3() ||
-	    machine_is_omap_perseus2()) {
+	    machine_is_omap_perseus2() || machine_is_omap_h6300()) {
 		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING);
 	}
 	/* scan current status and enable interrupt */
@@ -447,6 +636,6 @@
 module_init(omap_kp_init);
 module_exit(omap_kp_exit);
 
-MODULE_AUTHOR("Timo Teräs");
+MODULE_AUTHOR("Timo Ter�s");
 MODULE_DESCRIPTION("OMAP Keypad Driver");
 MODULE_LICENSE("GPL");
diff -Naur linux-2.6.16.16/drivers/input/touchscreen/omap/Makefile h6300_dev/drivers/input/touchscreen/omap/Makefile
--- linux-2.6.16.16/drivers/input/touchscreen/omap/Makefile	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/input/touchscreen/omap/Makefile	2005-10-22 03:52:45.000000000 +0300
@@ -8,5 +8,6 @@
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_H3) += ts_hx.o
 objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += ts_inn1510.o
 objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_OSK) += ts_osk.o
+objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_H6300) += ts_hx.o
 
 omapts-objs := omap_ts.o $(objs-yy)
diff -Naur linux-2.6.16.16/drivers/input/touchscreen/omap/omap_ts.c h6300_dev/drivers/input/touchscreen/omap/omap_ts.c
--- linux-2.6.16.16/drivers/input/touchscreen/omap/omap_ts.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/input/touchscreen/omap/omap_ts.c	2006-02-21 23:54:33.000000000 +0200
@@ -46,7 +46,7 @@
 #define OMAP_TS_NAME	"omap_ts"
 
 static struct ts_device *__initdata ts_devs[] = {
-#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) || defined(CONFIG_MACH_OMAP_H6300)
 	&hx_ts,
 #endif
 #ifdef CONFIG_MACH_OMAP_OSK
diff -Naur linux-2.6.16.16/drivers/input/touchscreen/omap/ts_hx.c h6300_dev/drivers/input/touchscreen/omap/ts_hx.c
--- linux-2.6.16.16/drivers/input/touchscreen/omap/ts_hx.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/input/touchscreen/omap/ts_hx.c	2006-04-24 20:53:29.000000000 +0300
@@ -39,6 +39,7 @@
 
 #define	H2_GPIO_NUM		4
 #define	H3_GPIO_NUM		48
+#define H6300_GPIO_NUM	2
 
 #define OMAP_TSC2101_XRES		       500
 #define TOUCHSCREEN_DATA_REGISTERS_PAGE	 0x0
@@ -88,6 +89,9 @@
 	} else if (machine_is_omap_h3()) {
 		gpio = H3_GPIO_NUM;
 		omap_cfg_reg(W19_1610_GPIO48);
+	} else if (machine_is_omap_h6300 ()) {
+		gpio = H6300_GPIO_NUM;
+		omap_cfg_reg(M14_1510_GPIO2);	
 	} else
 		return -ENODEV;
 
@@ -180,5 +184,7 @@
 		omap_free_gpio(H2_GPIO_NUM);
 	else if (machine_is_omap_h3())
 		omap_free_gpio(H3_GPIO_NUM);
+	else if (machine_is_omap_h6300())
+		omap_free_gpio(H6300_GPIO_NUM);
 }
 #endif
diff -Naur linux-2.6.16.16/drivers/mmc/mmc.c h6300_dev/drivers/mmc/mmc.c
--- linux-2.6.16.16/drivers/mmc/mmc.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/mmc/mmc.c	2006-03-28 10:34:39.000000000 +0300
@@ -964,7 +964,7 @@
 		mmc_decode_scr(card);
 	}
 
-	mmc_deselect_cards(host);
+	//mmc_deselect_cards(host);
 }
 
 static unsigned int mmc_calculate_clock(struct mmc_host *host)
diff -Naur linux-2.6.16.16/drivers/ssi/omap-tsc2101.c h6300_dev/drivers/ssi/omap-tsc2101.c
--- linux-2.6.16.16/drivers/ssi/omap-tsc2101.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/ssi/omap-tsc2101.c	2006-04-24 20:53:29.000000000 +0300
@@ -36,10 +36,11 @@
 #include <asm/arch/hardware.h>
 #include <asm/hardware/tsc2101.h>
 #include <asm/arch/gpioexpander.h>
+#include <asm/arch/gpio.h>
 
 #include "omap-tsc2101.h"
 
-#if CONFIG_ARCH_OMAP16XX
+#if CONFIG_ARCH_OMAP1
 #include <../drivers/ssi/omap-uwire.h>
 #else
 #error "Unsupported configuration"
@@ -66,27 +67,28 @@
 	if (count++ == 0) {
 		int ret = 0;
 		/* set the Mux to provide MCLK to TSC2101 */
-		if (machine_is_omap_h3()) {
+		if (machine_is_omap_h3())
 			ret = omap_cfg_reg(V5_1710_MCLK_ON);
-		} else {
-			if (machine_is_omap_h2()) {
-				ret = omap_cfg_reg(R10_1610_MCLK_ON);
+		else if (machine_is_omap_h2())
+			ret = omap_cfg_reg(R10_1610_MCLK_ON);
+		else if (machine_is_omap_h6300())
+			ret = omap_cfg_reg(R10_1510_MCLK_ON);
+
+		if (!cpu_is_omap1510 ()) {
+			/* Get the MCLK */
+			tsc2101_mclk_ck = clk_get(NULL, "mclk");
+			if (NULL == tsc2101_mclk_ck) {
+				printk(KERN_ERR "Unable to get the clock MCLK!!!\n");;
+				ret = -EPERM;
+				goto done;
 			}
-		}
-
-		/* Get the MCLK */
-		tsc2101_mclk_ck = clk_get(NULL, "mclk");
-		if (NULL == tsc2101_mclk_ck) {
-			printk(KERN_ERR "Unable to get the clock MCLK!!!\n");;
-			ret = -EPERM;
-			goto done;
-		}
-		if (clk_set_rate(tsc2101_mclk_ck, 12000000)) {
-			printk(KERN_ERR "Unable to set rate to the MCLK!!!\n");;
-			ret = -EPERM;
-			goto done;
-		}
-		clk_enable(tsc2101_mclk_ck);
+			if (clk_set_rate(tsc2101_mclk_ck, 12000000)) {
+				printk(KERN_ERR "Unable to set rate to the MCLK!!!\n");;
+				ret = -EPERM;
+				goto done;
+			}
+			clk_enable(tsc2101_mclk_ck);
+		} /* if (!cpu_is_omap1510 ()) */
 
 		ret = omap_tsc2101_configure();
 
@@ -116,10 +118,16 @@
 			}
 		}
 
-		/* Release the MCLK */
-		clk_disable(tsc2101_mclk_ck);
-		clk_put(tsc2101_mclk_ck);
-		tsc2101_mclk_ck = NULL;
+		if (!cpu_is_omap1510 ()) {
+			/* Release the MCLK */
+			clk_disable(tsc2101_mclk_ck);
+			clk_put(tsc2101_mclk_ck);
+			tsc2101_mclk_ck = NULL;
+		}
+
+#if defined(CONFIG_MACH_OMAP_H6300)
+		omap_free_gpio(8);
+#endif
 
 		module_put(THIS_MODULE);
 	}
@@ -150,7 +158,10 @@
 			return;
 		}
 	}
-	if (machine_is_omap_h3()) {
+	if (machine_is_omap_h3() || machine_is_omap_h6300()) {
+
+		if (machine_is_omap_h6300())
+			omap_set_gpio_dataout (8, 0);
 
 		ret =
 		    omap_uwire_data_transfer(0, ((page << 11) | (address << 5)),
@@ -159,6 +170,8 @@
 			printk(KERN_ERR
 			       "uwire-write returned error for address %x\n",
 			       address);
+		if (machine_is_omap_h6300())
+			omap_set_gpio_dataout (8, 1);
 			return;
 		}
 		ret = omap_uwire_data_transfer(0, data, 16, 0, NULL, 0);
@@ -166,10 +179,14 @@
 			printk(KERN_ERR
 			       "uwire-write returned error for address %x\n",
 			       address);
+			if (machine_is_omap_h6300())
+				omap_set_gpio_dataout (8, 1);
 			return;
 		}
-	}
 
+		if (machine_is_omap_h6300())
+			omap_set_gpio_dataout (8, 1);
+	}
 }
 
 void omap_tsc2101_reads(int page, u8 startaddress, u16 * data, int numregs)
@@ -178,9 +195,13 @@
 	if (machine_is_omap_h2()) {
 		cs = 1;
 	}
-	if (machine_is_omap_h3()) {
+	if (machine_is_omap_h3() || machine_is_omap_h6300()) {
 		cs = 0;
 	}
+
+	if (machine_is_omap_h6300())
+		omap_set_gpio_dataout(8, 0);
+
 	(void)omap_uwire_data_transfer(cs, (0x8000 | (page << 11)
 					    | (startaddress << 5)),
 				       16, 0, NULL, 1);
@@ -188,6 +209,9 @@
 		omap_uwire_data_transfer(cs, 0, 0, 16, data, 1);
 	}
 	omap_uwire_data_transfer(cs, 0, 0, 16, data, 0);
+
+	if (machine_is_omap_h6300())
+		omap_set_gpio_dataout(8, 1);
 }
 
 u16 omap_tsc2101_read(int page, u8 address)
@@ -228,9 +252,24 @@
 		omap_cfg_reg(N14_1610_UWIRE_CS0);
 		omap_uwire_configure_mode(0, uwire_flags);
 	}
+	if (machine_is_omap_h6300()) {
+		uwire_flags = UWIRE_READ_RISING_EDGE | UWIRE_WRITE_RISING_EDGE;
+		omap_cfg_reg(N14_1510_UWIRE_CS0);
+		omap_uwire_configure_mode(0, uwire_flags);
+
+		omap_request_gpio(8);
+		omap_set_gpio_dataout(8, 0);
+		omap_set_gpio_direction (8, 0);
+	}
 
 	/* Configure MCLK enable */
-	omap_writel(omap_readl(PU_PD_SEL_2) | (1 << 22), PU_PD_SEL_2);	
+	if (cpu_is_omap16xx() || cpu_is_omap1710())
+		omap_writel(omap_readl(PU_PD_SEL_2) | (1 << 22), PU_PD_SEL_2);	
+	if (machine_is_omap_h6300()) {
+		omap_cfg_reg(V19_1510_UWIRE_SCLK);
+		omap_cfg_reg(W21_1510_UWIRE_SDO);
+		omap_cfg_reg(U18_1510_UWIRE_SDI);
+	}
 
 	return 0;
 }
@@ -243,5 +282,5 @@
 
 MODULE_AUTHOR("Texas Instruments");
 MODULE_DESCRIPTION
-    ("Glue audio driver for the TI OMAP1610/OMAP1710 TSC2101 codec.");
+    ("Glue audio driver for the TI OMAP1510/1610/OMAP1710 TSC2101 codec.");
 MODULE_LICENSE("GPL");
diff -Naur linux-2.6.16.16/drivers/ssi/omap-uwire.c h6300_dev/drivers/ssi/omap-uwire.c
--- linux-2.6.16.16/drivers/ssi/omap-uwire.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/ssi/omap-uwire.c	2006-04-24 20:53:29.000000000 +0300
@@ -10,7 +10,7 @@
  * Ported to 2.6 uwire interface.
  * Copyright (C) 2004 Texas Instruments.
  *
- * Generalization patches by Juha Yrjölä <juha.yrjola@nokia.com>
+ * Generalization patches by Juha Yrj�l� <juha.yrjola@nokia.com>
  *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
@@ -212,6 +212,10 @@
 		omap_cfg_reg(N14_1610_UWIRE_CS0);
 		omap_cfg_reg(P15_1610_UWIRE_CS3);
 	}
+	if (machine_is_omap_h6300()) {
+		omap_cfg_reg(N14_1510_UWIRE_CS0);
+		omap_cfg_reg(P15_1510_UWIRE_CS3);
+	}
 	if (machine_is_omap_perseus2()) {
 		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
 		int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000;
diff -Naur linux-2.6.16.16/drivers/telephony/Kconfig h6300_dev/drivers/telephony/Kconfig
--- linux-2.6.16.16/drivers/telephony/Kconfig	2006-05-11 04:56:24.000000000 +0300
+++ h6300_dev/drivers/telephony/Kconfig	2005-10-06 02:34:39.000000000 +0300
@@ -41,7 +41,18 @@
 	help
 	  Say Y here to configure in PCMCIA service support for the Quicknet
 	  cards manufactured by Quicknet Technologies, Inc.  This changes the
-	  card initialization code to work with the card manager daemon.
+	  card initialization code to work with the card manager daemon.	  
+
+config GSM_H6300
+	tristate "H6300 P5186 GSM/GPRS DRIVER"
+	depends on PHONE && I2C && PCA9535
+	help
+	  Bluetooth H6300 P5186 gsm/gprs driver.
+	  This driver provides the firmware loading mechanism for the P5185
+	  gsm/gprs hardware in iPAQ h6300.
+
+	  Say Y here to compile support for P5186 gsm/gprs devices into the
+	  kernel or say M to compile it as module (h6300_gsm).
 
 endmenu
 
diff -Naur linux-2.6.16.16/drivers/telephony/Makefile h6300_dev/drivers/telephony/Makefile
--- linux-2.6.16.16/drivers/telephony/Makefile	2006-05-11 04:56:24.000000000 +0300
+++ h6300_dev/drivers/telephony/Makefile	2005-10-06 02:34:39.000000000 +0300
@@ -2,6 +2,7 @@
 # Makefile for drivers/telephony
 #
 
-obj-$(CONFIG_PHONE) += phonedev.o
-obj-$(CONFIG_PHONE_IXJ) += ixj.o
-obj-$(CONFIG_PHONE_IXJ_PCMCIA) += ixj_pcmcia.o
+obj-$(CONFIG_PHONE)				+= phonedev.o
+obj-$(CONFIG_PHONE_IXJ)			+= ixj.o
+obj-$(CONFIG_PHONE_IXJ_PCMCIA)	+= ixj_pcmcia.o
+obj-$(CONFIG_GSM_H6300)			+= omap/
diff -Naur linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_led.c h6300_dev/drivers/telephony/omap/h6300_gsm_led.c
--- linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_led.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/telephony/omap/h6300_gsm_led.c	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,40 @@
+/* 
+ * GSM interface driver helper for controlling bluetooth leds available in iPAQ h6300.
+ * 
+ * Copyright (C) 2005 Mika Laitio  <lamikr@cc.jyu.fi>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+
+/* 
+ * Low level access for disabling h6300 gsm led.
+ *
+ * TODO: implement for h6300 
+ */
+void h6300_clear_gsm_led(int led_num)
+{
+	printk(KERN_NOTICE "h6300_gsm_led.c h6300_clear_gsm_led() done\n");
+	//hx4700_set_led(led_num, 0, 16);
+}
+EXPORT_SYMBOL(h6300_clear_gsm_led);
+
+/* 
+ * Low level access for setting up the gsm led.
+ *
+ * TODO: implement for h6300 
+ */
+void h6300_set_gsm_led(int led_num, int duty_time, int cycle_time)
+{
+	printk(KERN_NOTICE "h6300_gsm_led.c h6300_set_gsm_led() done\n");
+}
+EXPORT_SYMBOL(h6300_set_gsm_led);
diff -Naur linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_led.h h6300_dev/drivers/telephony/omap/h6300_gsm_led.h
--- linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_led.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/telephony/omap/h6300_gsm_led.h	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,10 @@
+#ifndef H6300_GSM_LED_H_
+#define H6300_GSM_LED_H_
+
+#define INDEX_GSM_LED	1
+
+void h6300_clear_gsm_led(int led_num);
+void h6300_set_gsm_led(int led_num, int duty_time, int cycle_time);
+
+
+#endif /*H6300_GSM_LED_H_*/
diff -Naur linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_p5186.c h6300_dev/drivers/telephony/omap/h6300_gsm_p5186.c
--- linux-2.6.16.16/drivers/telephony/omap/h6300_gsm_p5186.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/telephony/omap/h6300_gsm_p5186.c	2006-01-23 00:09:23.000000000 +0200
@@ -0,0 +1,172 @@
+/* 
+ * Wavecom P5186 GPRS and GSM module driver for iPAQ h6300.
+ * 
+ * Copyright (C) 2005 Mika Laitio <lamikr@cc.jyu.fi>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/gpio.h>
+
+#include <asm/arch/pca9535.h>
+#include <asm/arch/h6300_uart_info.h>
+#include "h6300_gsm_led.h"
+
+static void
+h6300_gsm_configure(struct uart_omap_port *up, int enable)
+{
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_configure() started, enable = %d\n", enable);
+	
+	// printk( KERN_NOTICE "h6300 configure bluetooth: %d\n", enable );
+	if (enable == 0) {
+		pca9535_gpio_write(GPIO_I2C_GPRS_RESET, GPIO_VALUE_OFF);	// turn off gpio
+		mdelay(5);
+		h6300_clear_gsm_led(INDEX_GSM_LED);
+	}
+	else if (enable == 1) {
+		pca9535_gpio_write(GPIO_I2C_GPRS_RESET, GPIO_VALUE_ON);	// turn on gpio
+		mdelay(5);				
+	}
+	else if (enable == 2) {
+		h6300_set_gsm_led(INDEX_GSM_LED, 16, 16);
+	}
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_configure() done\n");
+}
+
+static void
+h6300_gsm_set_txrx(struct uart_omap_port *up, int txrx)
+{
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_set_txrx(), txrx = %d done\n", txrx);
+	/* do nothing */
+}
+
+static int
+h6300_gsm_get_txrx(struct uart_omap_port *up)
+{
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_get_txrx() done\n");
+	/* do nothing */
+	return 0;
+}
+
+static int
+h6300_gsm_probe(struct platform_device *pdev)
+{
+	int	ii;
+	int	curVal;
+	
+	struct h6300_uart_funcs *funcs = (struct h6300_uart_funcs *)pdev->dev.platform_data;
+/*
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_probe() started\n");	
+	for (ii = 0; ii < 8; ii++)
+	{
+		curVal	= pca9535_gpio_read(ii);
+		printk(KERN_NOTICE "I2C[%d] = %d ", ii, curVal);
+	}
+	for (ii = 10; ii < 18; ii++)
+	{
+		curVal	= pca9535_gpio_read(ii);
+		printk(KERN_NOTICE "I2C[%d] = %d ", ii, curVal);
+	}
+	printk(KERN_NOTICE "\nfirst check done\n");
+*/
+	pca9535_gpio_direction(GPIO_I2C_GPRS_RESET, GPIO_DIR_OUTPUT);	// set gpio direction to be output
+	pca9535_gpio_write(GPIO_I2C_GPRS_RESET, GPIO_VALUE_ON);	// turn on gpio
+	mdelay(200);
+	
+	pca9535_gpio_direction(GPIO_I2C_MIC_OP_EN, GPIO_DIR_OUTPUT);	// set gpio direction to be output
+	pca9535_gpio_write(GPIO_I2C_MIC_OP_EN, GPIO_VALUE_ON);	// turn on gpio
+	mdelay(200);
+
+	pca9535_gpio_direction(GPIO_I2C_SPK_OP_PD, GPIO_DIR_OUTPUT);	// set gpio direction to be output
+	pca9535_gpio_write(GPIO_I2C_SPK_OP_PD, GPIO_VALUE_ON);	// pd = pulldown?, normal off = on
+
+	mdelay(200);
+	
+	//pca9535_gpio_direction(
+	/* configure bluetooth UART */
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_RXD_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_TXD_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_UART_CTS_MD);
+	//h6300_gpio_mode(GPIO_NR_H6300_BT_UART_RTS_MD);
+
+	funcs->configure	= h6300_gsm_configure;
+	funcs->set_txrx		= h6300_gsm_set_txrx;
+	funcs->get_txrx		= h6300_gsm_get_txrx;
+
+	/* Make sure the LED is off */
+	h6300_clear_gsm_led(INDEX_GSM_LED);	
+/*	
+	for (ii = 0; ii < 8; ii++)
+	{
+		curVal	= pca9535_gpio_read(ii);
+		printk(KERN_NOTICE "I2C[%d] = %d ", ii, curVal);
+	}
+	for (ii = 10; ii < 18; ii++)
+	{
+		curVal	= pca9535_gpio_read(ii);
+		printk(KERN_NOTICE "I2C[%d] = %d ", ii, curVal);
+	}
+*/	
+	printk(KERN_NOTICE "\nh6300_gsm_p5186.c h6300_gsm_probe() done\n");
+		
+	return 0;
+}
+
+static int
+h6300_gsm_remove(struct platform_device *pdev)
+{
+	struct h6300_uart_funcs *funcs = (struct h6300_uart_funcs *)pdev->dev.platform_data;
+	
+	printk(KERN_NOTICE "h6300_gsm_p5186.c h6300_gsm_remove() started\n");	
+
+	pca9535_gpio_write(GPIO_I2C_GPRS_RESET, 0);	// turn off gpio
+	
+	funcs->configure	= NULL;
+	funcs->set_txrx		= NULL;
+	funcs->get_txrx		= NULL;
+
+	/* Make sure the LED is off */
+	h6300_clear_gsm_led(INDEX_GSM_LED);
+	
+	printk(KERN_NOTICE "h6300_gsm_p5186.c, h6300_gsm_remove() done\n");
+
+	return 0;
+}
+
+static struct platform_driver gsm_driver = {
+	.probe    = h6300_gsm_probe,
+	.remove   = h6300_gsm_remove,
+	.driver = {
+		.name	= "h6300_gsm",
+	},
+};
+
+static int __init
+h6300_gsm_init(void)
+{
+	printk(KERN_NOTICE "h6300 GSM Driver init()\n");
+	return platform_driver_register(&gsm_driver);
+}
+
+static void __exit
+h6300_gsm_exit(void)
+{
+	printk(KERN_NOTICE "h6300 GSM Driver exit()\n");
+	platform_driver_unregister(&gsm_driver);
+}
+
+module_init(h6300_gsm_init);
+module_exit(h6300_gsm_exit);
+
+MODULE_AUTHOR("Mika Laitio, <lamikr@cc.jyu.fi>");
+MODULE_DESCRIPTION("iPAQ h6300 Wavecom P5186 GPRS and GSM module driver.");
+MODULE_LICENSE("GPL");
+
diff -Naur linux-2.6.16.16/drivers/telephony/omap/Makefile h6300_dev/drivers/telephony/omap/Makefile
--- linux-2.6.16.16/drivers/telephony/omap/Makefile	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/telephony/omap/Makefile	2005-10-06 02:34:39.000000000 +0300
@@ -0,0 +1,6 @@
+#
+# Makefile for the Linux iPAQ H6300 BRF6100 Bluetooth device drivers.
+#
+
+h6300_gsm-objs			:= h6300_gsm_led.o h6300_gsm_p5186.o
+obj-$(CONFIG_GSM_H6300)	+= h6300_gsm.o
diff -Naur linux-2.6.16.16/drivers/usb/gadget/omap_udc.c h6300_dev/drivers/usb/gadget/omap_udc.c
--- linux-2.6.16.16/drivers/usb/gadget/omap_udc.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/usb/gadget/omap_udc.c	2006-04-24 20:53:29.000000000 +0300
@@ -60,7 +60,8 @@
 #undef	USB_TRACE
 
 /* bulk DMA seems to be behaving for both IN and OUT */
-#define	USE_DMA
+//#define	USE_DMA
+#undef USE_DMA
 
 /* ISO too */
 #define	USE_ISO
@@ -2147,7 +2148,7 @@
 	/* boards that don't have VBUS sensing can't autogate 48MHz;
 	 * can't enter deep sleep while a gadget driver is active.
 	 */
-	if (machine_is_omap_innovator() || machine_is_omap_osk())
+	if (machine_is_omap_innovator() || machine_is_omap_osk() || machine_is_omap_h6300())
 		omap_vbus_session(&udc->gadget, 1);
 
 done:
@@ -2170,7 +2171,7 @@
 	if (udc->dc_clk != NULL)
 		omap_udc_enable_clock(1);
 
-	if (machine_is_omap_innovator() || machine_is_omap_osk())
+	if (machine_is_omap_innovator() || machine_is_omap_osk() || machine_is_omap_h6300())
 		omap_vbus_session(&udc->gadget, 0);
 
 	if (udc->transceiver)
@@ -2791,7 +2792,7 @@
 		hmc = HMC_1510;
 		type = "(unknown)";
 
-		if (machine_is_omap_innovator()) {
+		if (machine_is_omap_innovator() || machine_is_omap_h6300()) {
 			/* just set up software VBUS detect, and then
 			 * later rig it so we always report VBUS.
 			 * FIXME without really sensing VBUS, we can't
diff -Naur linux-2.6.16.16/drivers/usb/host/ohci-omap.c h6300_dev/drivers/usb/host/ohci-omap.c
--- linux-2.6.16.16/drivers/usb/host/ohci-omap.c	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/usb/host/ohci-omap.c	2006-02-06 15:36:21.000000000 +0200
@@ -353,11 +353,7 @@
 	if (IS_ERR(usb_host_ck))
 		return PTR_ERR(usb_host_ck);
 
-	if (!cpu_is_omap1510())
-		usb_dc_ck = clk_get(0, "usb_dc_ck");
-	else
-		usb_dc_ck = clk_get(0, "lb_ck");
-
+	usb_dc_ck = clk_get(0, "usb_dc_ck");
 	if (IS_ERR(usb_dc_ck)) {
 		clk_put(usb_host_ck);
 		return PTR_ERR(usb_dc_ck);
diff -Naur linux-2.6.16.16/drivers/video/omap/lcd_h6300.c h6300_dev/drivers/video/omap/lcd_h6300.c
--- linux-2.6.16.16/drivers/video/omap/lcd_h6300.c	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/drivers/video/omap/lcd_h6300.c	2006-04-24 20:53:29.000000000 +0300
@@ -0,0 +1,159 @@
+/*
+ * File: drivers/video/omap_new/lcd-h6300.c
+ *
+ * LCD panel support for the TI OMAP1510 Innovator board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+
+#include <asm/arch/pca9535.h>
+#include <asm/arch/omapfb.h>
+
+/* #define OMAPFB_DBG 1 */
+
+#include "debug.h"
+
+//static struct clk *h6300_lcd_ck;
+
+static int h6300_panel_init(struct omapfb_device *fbdev)
+{
+	DBGENTER(1);
+/*
+	if ((h6300_lcd_ck = clk_get (NULL, "lcd_ck")) == NULL) {
+		printk(KERN_ERR "Unable to get the clock LCD_CK!!!\n");
+		return -EPERM;
+	} clk_enable(h6300_lcd_ck);
+*/
+	DBGLEAVE(1);
+	printk(KERN_INFO "lcd_h6300.c: h6300_panel_init() done\n");
+	return 0;
+}
+
+static void h6300_panel_cleanup(void)
+{
+	DBGENTER(1);
+/*
+	if (h6300_lcd_ck) {
+		clk_disable(h6300_lcd_ck);
+		clk_put(h6300_lcd_ck);
+		h6300_lcd_ck = NULL;
+	}
+*/
+	DBGLEAVE(1);
+	printk(KERN_INFO "lcd_h6300.c: h6300_panel_cleanup() done\n");
+}
+
+static int h6300_panel_enable(void)
+{
+	DBGENTER(1);
+	DBGLEAVE(1);
+	printk(KERN_INFO "lcd_h6300.c: h6300_panel_enable() done\n");
+	return 0;
+}
+
+static void h6300_panel_disable(void)
+{
+	DBGENTER(1);
+	DBGLEAVE(1);
+	printk(KERN_INFO "lcd_h6300.c: h6300_panel_disable() done\n");	
+}
+
+static unsigned long h6300_panel_get_caps(void)
+{
+	printk(KERN_INFO "lcd_h6300.c: h6300_panel_get_caps() called\n");	
+	return 0;
+}
+
+struct lcd_panel h6300_panel = {
+	.name		= "h6300",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 21000,
+	.hsw		= 12,
+	.hfp		= 10,
+	.hbp		= 10,
+	.vsw		= 3,
+	.vfp		= 10,
+	.vbp		= 3,
+	.pcd		= 0,
+
+	.init		= h6300_panel_init,
+	.cleanup	= h6300_panel_cleanup,
+	.enable		= h6300_panel_enable,
+	.disable	= h6300_panel_disable,
+	.get_caps	= h6300_panel_get_caps,
+};
+
+static int h6300_panel_probe(struct platform_device *pdev)
+{
+	DBGENTER(1);
+	omapfb_register_panel(&h6300_panel);
+	return 0;
+}
+
+static int h6300_panel_remove(struct platform_device *pdev)
+{
+	DBGENTER(1);
+	return 0;
+}
+
+static int h6300_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	DBGENTER(1);
+	pca9535_gpio_write(GPIO3, HI);
+	return 0;
+}
+
+static int h6300_panel_resume(struct platform_device *pdev)
+{
+	DBGENTER(1);
+	pca9535_gpio_write(GPIO3, LOW);
+	return 0;
+}
+
+struct platform_driver h6300_panel_driver = {
+	.probe		= h6300_panel_probe,
+	.remove		= h6300_panel_remove,
+	.suspend	= h6300_panel_suspend,
+	.resume		= h6300_panel_resume,
+	.driver		= {
+		.name	= "lcd_h6300",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int h6300_panel_drv_init(void)
+{
+	return platform_driver_register(&h6300_panel_driver);
+}
+
+static void h6300_panel_drv_cleanup(void)
+{
+	platform_driver_unregister(&h6300_panel_driver);
+}
+
+module_init(h6300_panel_drv_init);
+module_exit(h6300_panel_drv_cleanup);
diff -Naur linux-2.6.16.16/drivers/video/omap/Makefile h6300_dev/drivers/video/omap/Makefile
--- linux-2.6.16.16/drivers/video/omap/Makefile	2006-05-17 21:41:30.000000000 +0300
+++ h6300_dev/drivers/video/omap/Makefile	2006-02-21 23:54:33.000000000 +0200
@@ -23,6 +23,7 @@
 objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
 objs-y$(CONFIG_MACH_OMAP_PERSEUS2) += lcd_p2.o
 objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
+objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_H6300) += lcd_h6300.o
 
 objs-y$(CONFIG_FB_OMAP_LCD_LPH8923) += lcd_lph8923.o
 
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/board-h6300.h h6300_dev/include/asm-arm/arch-omap/board-h6300.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/board-h6300.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/include/asm-arm/arch-omap/board-h6300.h	2006-04-24 20:53:29.000000000 +0300
@@ -0,0 +1,40 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H6300_H
+#define __ASM_ARCH_OMAP_H6300_H
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE				D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
+
+#define NR_FPGA_IRQS					24
+#define NR_IRQS                 		IH_BOARD_BASE + NR_FPGA_IRQS
+
+#endif /* __ASM_ARCH_OMAP_H6300_H */
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/h6300_uart_info.h h6300_dev/include/asm-arm/arch-omap/h6300_uart_info.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/h6300_uart_info.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/include/asm-arm/arch-omap/h6300_uart_info.h	2005-10-14 18:55:31.000000000 +0300
@@ -0,0 +1,33 @@
+/*
+ * Support file for calling h6300 uart configuration functions.
+ * Used at least by h6300_bt driver.
+ * 
+ * Copyright (c) 2005 SDG Systems, LLC
+ * 2005-03-29   Todd Blumer     Converted  basic structure to support hx4700
+ * 2005-10-03   Mika Laitio (lamikr@cc.jyu.fi)	Reorganized for the iPAQ h6300 bt driver.
+ */
+
+#ifndef _H6300_UART_INFO_H
+#define _H6300_UART_INFO_H
+
+#include "omap_serial.h"
+
+#define GPIO_BT_PWR_EN 3
+#define GPIO_N_BT_RST 9
+
+#define GPIO_I2C_GPRS_RESET 16
+#define GPIO_I2C_MIC_OP_EN 10
+#define GPIO_I2C_SPK_OP_PD 11
+
+#define GPIO_VALUE_OFF	0
+#define GPIO_VALUE_ON	1
+
+#define GPIO_DIR_OUTPUT 1
+
+struct h6300_uart_funcs {
+	void (*configure)( struct uart_omap_port *up, int state);
+	void (*set_txrx)( struct uart_omap_port *up, int txrx);
+	int (*get_txrx)( struct uart_omap_port *up);
+};
+
+#endif
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/hardware.h h6300_dev/include/asm-arm/arch-omap/hardware.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/hardware.h	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/include/asm-arm/arch-omap/hardware.h	2006-02-06 15:36:21.000000000 +0200
@@ -290,6 +290,10 @@
 #include "board-innovator.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP_H6300
+#include "board-h6300.h"
+#endif
+
 #ifdef CONFIG_MACH_OMAP_H2
 #include "board-h2.h"
 #endif
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/mux.h h6300_dev/include/asm-arm/arch-omap/mux.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/mux.h	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/include/asm-arm/arch-omap/mux.h	2006-05-18 00:38:24.000000000 +0300
@@ -320,6 +320,13 @@
 	P15_1610_UWIRE_CS3,
 	N15_1610_UWIRE_CS1,
 
+	/* OMAP-1510 uWire */
+	P15_1510_UWIRE_CS3,
+	N14_1510_UWIRE_CS0,
+	V19_1510_UWIRE_SCLK,
+	W21_1510_UWIRE_SDO,
+	U18_1510_UWIRE_SDI,
+
 	/* OMAP-1610 Flash */
 	L3_1610_FLASH_CS2B_OE,
 	M8_1610_FLASH_CS2B_WE,
@@ -384,6 +391,7 @@
 	T20_1610_LOW_PWR,
 
 	/* MCLK Settings */
+	R10_1510_MCLK_ON,
 	V5_1710_MCLK_ON,
 	V5_1710_MCLK_OFF,
 	R10_1610_MCLK_ON,
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/omap-alsa.h h6300_dev/include/asm-arm/arch-omap/omap-alsa.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/omap-alsa.h	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/include/asm-arm/arch-omap/omap-alsa.h	2006-03-08 13:28:16.000000000 +0200
@@ -1,6 +1,6 @@
 /*
  * linux/include/asm-arm/arch-omap/omap-alsa.h
- *
+ * 
  * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
  *
  * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/omap_serial.h h6300_dev/include/asm-arm/arch-omap/omap_serial.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/omap_serial.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/include/asm-arm/arch-omap/omap_serial.h	2005-10-04 00:58:34.000000000 +0300
@@ -0,0 +1,62 @@
+/*
+ * Omap/h6300 serial driver private interface. 
+ * Code originates from the pxa-serial.h available in the handheld org drivers
+ * for iPAQ PXA4700.
+ *
+ * Copyright (c) 2005 SDG Systems, LLC
+ * 2005-03-29   Todd Blumer     Converted  basic structure to support hx4700
+ * 2005-10-03   Mika Laitio (lamikr@cc.jyu.fi)	Reorganized for the iPAQ h6300 bt driver.
+ */
+ 
+#ifndef _OMAP_SERIAL_H
+#define _OMAP_SERIAL_H
+
+#define OMAP_SERIAL_TX 1
+#define OMAP_SERIAL_RX 2
+
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+
+struct platform_omap_serial_funcs;
+
+struct uart_omap_port {
+	struct uart_port			port;
+	unsigned char				ier;
+	unsigned char				lcr;
+	unsigned char				mcr;
+	unsigned int    			lsr_break_flag;
+	unsigned int				cken;
+	char					*name;
+	struct platform_omap_serial_funcs	*pf;
+};
+
+/* A pointer to such a structure can be contained in the platform_data
+ * field of every PXA UART platform_device. If the field is NULL, the
+ * serial port works as usual.
+ *
+ * For the sake of simplicity/performance no one of the function pointers
+ * in the structure below can be NULL.
+ */
+struct platform_omap_serial_funcs {
+	/* Platform-specific function to initialize whatever is connected
+         to this serial port... enable=1 -> enable transceiver,
+         0 -> disable transceiver. */
+	void (*configure) (struct uart_omap_port *up, int enable);
+        /* Platform-specific function to enable or disable the individual
+           transmitter/receiver submodules. On transceivers without echo
+           cancellation (e.g. SIR) transmitter always has priority, e.g.
+           if both bits are set, only the transmitter is enabled. */
+        void (*set_txrx) (struct uart_omap_port *up, int txrx);
+	/* Get the current state of tx/rx (see bitflags above) */
+	int (*get_txrx) (struct uart_omap_port *up);
+};
+
+/*
+ * The variables below are located in arch/arm/mach-omap/board_h6300.c
+ * Machine-specific code may want to put a pointer to a static
+ * platform_pxa_serial_funcs structure in the dev.platform_data
+ * field of the respective port device.
+ */
+extern struct platform_device btuart_device;
+
+#endif
diff -Naur linux-2.6.16.16/include/asm-arm/arch-omap/pca9535.h h6300_dev/include/asm-arm/arch-omap/pca9535.h
--- linux-2.6.16.16/include/asm-arm/arch-omap/pca9535.h	1970-01-01 02:00:00.000000000 +0200
+++ h6300_dev/include/asm-arm/arch-omap/pca9535.h	2005-10-25 03:24:45.000000000 +0300
@@ -0,0 +1,39 @@
+#ifndef _PCA9535_H
+#define _PCA9535_H
+
+enum  pca9535_gpios {
+	GPIO0 = 0,
+	GPIO1 = 1,
+	GPIO2 = 2,
+	GPIO3 = 3,
+	GPIO4 = 4,
+	GPIO5 = 5,
+	GPIO6 = 6,
+	GPIO7 = 7,
+	GPIO8 = 8,
+	GPIO9 = 9,
+	GPIO10 = 10,
+	GPIO11 = 11,
+	GPIO12 = 12,
+	GPIO13 = 13,
+	GPIO14 = 14,
+	GPIO15 = 15,
+	GPIO16 = 16,
+	GPIO17 = 17
+};
+
+enum gpio_values {
+	HI	= 0,
+	LOW	= 1
+};
+
+enum gpio_direction {
+	GPIO_INPUT	= 0,
+	GPIO_OUTPUT	= 1
+};
+
+extern int pca9535_gpio_read(int gpio);
+extern int pca9535_gpio_write(int gpio, unsigned char val);	
+extern int pca9535_gpio_direction(int gpio, unsigned char direction);
+
+#endif
diff -Naur linux-2.6.16.16/Makefile h6300_dev/Makefile
--- linux-2.6.16.16/Makefile	2006-05-17 21:41:27.000000000 +0300
+++ h6300_dev/Makefile	2006-05-18 01:45:17.000000000 +0300
@@ -11,7 +11,7 @@
 # expect to learn how to build the kernel reading this file.
 
 # Add custom flags here to avoid conflict with updates
-EXTRAVERSION := $(EXTRAVERSION)-omap2
+EXTRAVERSION := $(EXTRAVERSION)-omap1-h6300
 
 # Do not print "Entering directory ..."
 MAKEFLAGS += --no-print-directory
diff -Naur linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101.c h6300_dev/sound/arm/omap/omap-alsa-tsc2101.c
--- linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101.c	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/sound/arm/omap/omap-alsa-tsc2101.c	2006-03-30 23:15:31.000000000 +0300
@@ -96,7 +96,11 @@
 static snd_pcm_hardware_t tsc2101_snd_omap_alsa_playback = {
 	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),	
-	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
+#ifdef CONFIG_MACH_OMAP_H6300
+	.formats = (SNDRV_PCM_FMTBIT_S8),
+#else
+ 	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
+#endif
 	.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |
 		  SNDRV_PCM_RATE_16000 |
 		  SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
@@ -136,7 +140,7 @@
 };
 
 /* 
- * Simplified write for tsc Audio
+ * Simplified write for tsc2101 audio registers.
  */
 inline void tsc2101_audio_write(u8 address, u16 data)
 {
@@ -144,7 +148,7 @@
 }
 
 /* 
- * Simplified read for tsc  Audio
+ * Simplified read for tsc2101 audio registers.
  */
 inline u16 tsc2101_audio_read(u8 address)
 {
@@ -246,14 +250,17 @@
 #endif				/* #ifdef TSC_MASTER */
 	tsc2101_audio_write(TSC2101_AUDIO_CTRL_3, data);
 
-	/* program the PLLs */
+	/* Program the PLLs. This code assumes that the 12 Mhz MCLK is in use.
+         * If MCLK rate is something else, these values must be changed.
+	 * See the tsc2101 specification for the details.
+	 */
 	if (rate_reg_info[count].fs_44kHz) {
-		/* 44.1 khz - 12 MHz Mclk */
+		/* samplerate = (44.1kHZ / x), where x is int. */
 		tsc2101_audio_write(TSC2101_PLL_PROG_1, PLL1_PLLSEL |
 				PLL1_PVAL(1) | PLL1_I_VAL(7));	/* PVAL 1; I_VAL 7 */
 		tsc2101_audio_write(TSC2101_PLL_PROG_2, PLL2_D_VAL(0x1490));	/* D_VAL 5264 */
 	} else {
-		/* 48 khz - 12 Mhz Mclk */
+		/* samplerate = (48.kHZ / x), where x is int. */
 		tsc2101_audio_write(TSC2101_PLL_PROG_1, PLL1_PLLSEL |
 			       PLL1_PVAL(1) | PLL1_I_VAL(8));	/* PVAL 1; I_VAL 8 */
 		tsc2101_audio_write(TSC2101_PLL_PROG_2, PLL2_D_VAL(0x780));	/* D_VAL 1920 */
@@ -317,21 +324,14 @@
 		       CODEC_CLOCK);
 	}
 	curRate	= (uint)clk_get_rate(tsc2101_mclk);
-	DPRINTK("old clock rate = %d\n", curRate);
 	if (curRate != CODEC_CLOCK) {
 		err	= clk_set_rate(tsc2101_mclk, CODEC_CLOCK);
 		if (err) {
 			printk(KERN_WARNING
 			       "Cannot set MCLK clock rate for TSC2101 CODEC, error code = %d\n", err);
-			//return -ECANCELED;
+			return -ECANCELED;
 		}
 	}
-	else
-	{
-		printk(KERN_INFO
-		       "omap_alsa_tsc2101_clock_on(), no need to change rate, no need to change clock rate, rate already %d Hz.\n",
-		       CODEC_CLOCK);
-	}
 	err		= clk_enable(tsc2101_mclk);
 	curRate		= (uint)clk_get_rate(tsc2101_mclk);
 	curUseCount	= clk_get_usecount(tsc2101_mclk);
@@ -349,8 +349,7 @@
 }
 
 /*
- * Do some sanity check, turn clock off and then turn
- *  codec audio off
+ * Do some sanity check, turn clock off and then turn codec audio off
  */
 int tsc2101_clock_off(void) 
 {
@@ -374,10 +373,6 @@
 	tsc2101_audio_write(TSC2101_CODEC_POWER_CTRL,
 			    ~(CPC_SP1PWDN | CPC_SP2PWDN | CPC_BASSBC));
 	DPRINTK("audio codec off\n");
-#ifdef DUMP_TSC2101_AUDIO_REGISTERS
-	printk("tsc2101_clock_off()\n");
-	dump_tsc2101_audio_reg();
-#endif	
 	return 0;	
 }
 
@@ -420,18 +415,22 @@
 };
 
 static int __init omap_alsa_tsc2101_init(void)
-{
-	int err;
-	
+{	
 	ADEBUG();
-	err = platform_driver_register(&omap_alsa_driver);
-
-	return err;
+#ifdef DUMP_TSC2101_AUDIO_REGISTERS
+	printk("omap_alsa_tsc2101_init()\n");
+	dump_tsc2101_audio_reg();
+#endif
+	return platform_driver_register(&omap_alsa_driver);
 }
 
 static void __exit omap_alsa_tsc2101_exit(void)
 {
 	ADEBUG();
+#ifdef DUMP_TSC2101_AUDIO_REGISTERS
+	printk("omap_alsa_tsc2101_exit()\n");
+	dump_tsc2101_audio_reg();
+#endif
 	platform_driver_unregister(&omap_alsa_driver);
 }
 
diff -Naur linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101-mixer.c h6300_dev/sound/arm/omap/omap-alsa-tsc2101-mixer.c
--- linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101-mixer.c	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/sound/arm/omap/omap-alsa-tsc2101-mixer.c	2006-05-10 02:42:13.000000000 +0300
@@ -50,47 +50,53 @@
 //#define M_DPRINTK(ARGS...)  printk(KERN_INFO "<%s>: ",__FUNCTION__);printk(ARGS)
 #define M_DPRINTK(ARGS...)  		/* nop */
 
+#define CHECK_BIT(INDX, ARG) (((ARG) & TSC2101_BIT(INDX)) >> INDX)
+#define IS_UNMUTED(INDX, ARG) (((CHECK_BIT(INDX, ARG)) == 0))
+
 #define DGC_DALVL_EXTRACT(ARG) ((ARG & 0x7f00) >> 8)
 #define DGC_DARVL_EXTRACT(ARG) ((ARG & 0x007f))
-#define GET_DGC_DALMU_BIT_VALUE(ARG)  (((ARG) & TSC2101_BIT(15)) >> 15)
-#define GET_DGC_DARMU_BIT_VALUE(ARG)  (((ARG) & TSC2101_BIT(7)) >> 7)
-#define IS_DGC_DALMU_UNMUTED(ARG)  (((GET_DGC_DALMU_BIT_VALUE(ARG)) == 0))
-#define IS_DGC_DARMU_UNMUTED(ARG) (((GET_DGC_DARMU_BIT_VALUE(ARG)) == 0))
 
 #define HGC_ADPGA_HED_EXTRACT(ARG) ((ARG & 0x7f00) >> 8)
-#define GET_DGC_HGCMU_BIT_VALUE(ARG) (((ARG) & TSC2101_BIT(15)) >> 15)
-#define IS_DGC_HGCMU_UNMUTED(ARG) (((GET_DGC_HGCMU_BIT_VALUE(ARG)) == 0))
-
 #define HNGC_ADPGA_HND_EXTRACT(ARG) ((ARG & 0x7f00) >> 8)
-#define GET_DGC_HNGCMU_BIT_VALUE(ARG) (((ARG) & TSC2101_BIT(15)) >> 15)
-#define IS_DGC_HNGCMU_UNMUTED(ARG) (((GET_DGC_HNGCMU_BIT_VALUE(ARG)) == 0))
+#define BGC_ADPGA_BGC_EXTRACT(ARG) ((ARG & 0x7f00) >> 8)
 
 static int current_playback_target	= PLAYBACK_TARGET_LOUDSPEAKER;
 static int current_rec_src 		= REC_SRC_SINGLE_ENDED_MICIN_HED;
 
+/* 
+ * Simplified write for the tsc2101 audio registers.
+ */
+inline void omap_tsc2101_audio_write(u8 address, u16 data)
+{
+	omap_tsc2101_write(PAGE2_AUDIO_CODEC_REGISTERS, address, data);
+}
+
+/* 
+ * Simplified read for the tsc2101 audio registers.
+ */
+inline u16 omap_tsc2101_audio_read(u8 address)
+{
+	return (omap_tsc2101_read(PAGE2_AUDIO_CODEC_REGISTERS, address));
+}
+
 /*
- * Used for switching between TSC2101 recourd sources.
- * Logic is adjusted from the TSC2101 OSS code.
+ * For selecting tsc2101 recourd source.
  */
-static int set_record_source(int val)
+static void set_record_source(int val)
 {
 	u16	data;
-	int	maskedVal;
 	
-	FN_IN;
-	maskedVal	= 0xe0 & val;	
-
-	data	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_MIXER_PGA_CTRL);
+	/* Mute Analog Sidetone
+	 * Analog sidetone gain db?
+	 * Input selected by MICSEL connected to ADC
+	 */
+	data	= MPC_ASTMU | MPC_ASTG(0x45);
 	data	&= ~MPC_MICSEL(7); /* clear all MICSEL bits */
-	data	|= maskedVal;
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-				TSC2101_MIXER_PGA_CTRL,
-				data);
+	data	|= MPC_MICSEL(val);
+	data	|= MPC_MICADC;
+	omap_tsc2101_audio_write(TSC2101_MIXER_PGA_CTRL, data);
+	
 	current_rec_src	= val;
-
-	FN_OUT(0);
-	return 0;
 }
 
 /*
@@ -147,32 +153,34 @@
 	volL	= get_mixer_volume_as_dac_gain_control_volume(mixerVolL);
 	volR	= get_mixer_volume_as_dac_gain_control_volume(mixerVolR);
 	
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_DAC_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_DAC_GAIN_CTRL);
 	/* keep the old mute bit settings */
 	val	&= ~(DGC_DALVL(OUTPUT_VOLUME_MIN) | DGC_DARVL(OUTPUT_VOLUME_MIN));
 	val	|= DGC_DALVL(volL) | DGC_DARVL(volR);
 	retVal	= 2;
 	if (retVal) {
-		omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_DAC_GAIN_CTRL, 
-				val);
+		omap_tsc2101_audio_write(TSC2101_DAC_GAIN_CTRL, val);
 	}
 	M_DPRINTK("to registry: left = %d, right = %d, total = %d\n", DGC_DALVL_EXTRACT(val), DGC_DARVL_EXTRACT(val), val);
 	return retVal;
 }
 
-int dac_gain_control_unmute_control(int muteLeft, int muteRight)
+/**
+ * If unmuteLeft/unmuteRight == 0  --> mute
+ * If unmuteLeft/unmuteRight == 1 --> unmute
+ */
+int dac_gain_control_unmute(int unmuteLeft, int unmuteRight)
 {
 	u16 val;
 	int count;
 
 	count	= 0;
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_DAC_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_DAC_GAIN_CTRL);
 	/* in alsa mixer 1 --> on, 0 == off. In tsc2101 registry 1 --> off, 0 --> on
 	 * so if values are same, it's time to change the registry value.
 	 */
-	if (muteLeft == GET_DGC_DALMU_BIT_VALUE(val)) {
-		if (muteLeft == 0) {
+	if (unmuteLeft != IS_UNMUTED(15, val)) {
+		if (unmuteLeft == 0) {
 			/* mute --> turn bit on */
 			val	= val | DGC_DALMU;
 		}
@@ -182,8 +190,8 @@
 		}
 		count++;
 	} /* L */
-	if (muteRight == GET_DGC_DARMU_BIT_VALUE(val)) {
-		if (muteRight == 0) {
+	if (unmuteRight != IS_UNMUTED(7, val)) {
+		if (unmuteRight == 0) {
 			/* mute --> turn bit on */
 			val	= val | DGC_DARMU;
 		}
@@ -194,14 +202,47 @@
 		count++;
 	} /* R */
 	if (count) {
-		omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_DAC_GAIN_CTRL, val);
+		omap_tsc2101_audio_write(TSC2101_DAC_GAIN_CTRL, val);
 		M_DPRINTK("changed value, is_unmuted left = %d, right = %d\n", 
-			IS_DGC_DALMU_UNMUTED(val),
-			IS_DGC_DARMU_UNMUTED(val));
+			IS_UNMUTED(15, val),
+			IS_UNMUTED(7, val));
 	}
 	return count;	
 }
 
+/**
+ * unmute: 0 --> mute, 1 --> unmute
+ * page2RegIndx: Registry index in tsc2101 page2.
+ * muteBitIndx: Index number for the bit in registry that indicates whether muted or unmuted.
+ */
+int adc_pga_unmute_control(int unmute, int page2regIndx, int muteBitIndx)
+{
+	int count;
+	u16 val;
+	
+	count	= 0;
+	val 	= omap_tsc2101_audio_read(page2regIndx);
+	/* in alsa mixer 1 --> on, 0 == off. In tsc2101 registry 1 --> off, 0 --> on
+	 * so if the values are same, it's time to change the registry value...
+	 */
+	if (unmute != IS_UNMUTED(muteBitIndx, val)) {
+		if (unmute == 0) {
+			/* mute --> turn bit on */
+			val	= val | TSC2101_BIT(muteBitIndx);
+		}
+		else {
+			/* unmute --> turn bit off */
+			val	= val & ~TSC2101_BIT(muteBitIndx);
+		}
+		M_DPRINTK("changed value, is_unmuted = %d\n", IS_UNMUTED(muteBitIndx, val));
+		count++;
+	}
+	if (count) {
+		omap_tsc2101_audio_write(page2regIndx, val);
+	}
+	return count;
+}
+
 /*
  * Converts the DGC registry value read from the TSC2101 registry to 
  * Alsa mixer volume format (0 - 100).
@@ -271,14 +312,11 @@
 	/* Convert 0 -> 100 volume to 0x0(min) -> 0x7D(max) volume range */
 	/* NOTE: 0 is minimum volume and not mute */
 	volume	= get_mixer_volume_as_headset_gain_control_volume(mixerVol);	
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HEADSET_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_HEADSET_GAIN_CTRL);
 	/* preserve the old mute settings */
 	val	&= ~(HGC_ADPGA_HED(INPUT_VOLUME_MAX));
 	val	|= HGC_ADPGA_HED(volume);
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-			TSC2101_HEADSET_GAIN_CTRL,
-			val);	
+	omap_tsc2101_audio_write(TSC2101_HEADSET_GAIN_CTRL, val);	
 	retVal	= 1;
 	
 	M_DPRINTK("to registry = %d\n", val);	
@@ -305,71 +343,37 @@
 	 * NOTE: 0 is minimum volume and not mute 
 	 */
 	volume	= get_mixer_volume_as_headset_gain_control_volume(mixerVol);
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_HANDSET_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_HANDSET_GAIN_CTRL);
 	/* preserve the old mute settigns */
 	val	&= ~(HNGC_ADPGA_HND(INPUT_VOLUME_MAX));
 	val	|= HNGC_ADPGA_HND(volume);
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-			TSC2101_HANDSET_GAIN_CTRL,
-			val);
+	omap_tsc2101_audio_write(TSC2101_HANDSET_GAIN_CTRL, val);
 	retVal	= 1;
 	
 	M_DPRINTK("to registry = %d\n", val);	
 	return retVal;
 }
 
-void init_record_sources(void)
-{
-	/* Mute Analog Sidetone
-	 * analog sidetone gain db?
-	 * Cell Phone In not connected to ADC
-	 * Input selected by MICSEL connected to ADC
-	 */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-			  TSC2101_MIXER_PGA_CTRL,
-			  MPC_ASTMU | MPC_ASTG(0x40) | ~MPC_CPADC | MPC_MICADC);
-	/* Set record source, Select MIC_INHED input for headset */
-	set_record_source(REC_SRC_SINGLE_ENDED_MICIN_HED);	
-}
-
 void set_loudspeaker_to_playback_target(void)
 {
-	u16	val;
-
-	/* power down sp1, sp2 and loudspeaker */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_CODEC_POWER_CTRL,
+	/* power down SPK1, SPK2 and loudspeaker */
+	omap_tsc2101_audio_write(TSC2101_CODEC_POWER_CTRL,
 			CPC_SP1PWDN | CPC_SP2PWDN | CPC_LDAPWDF);	
 	/* ADC, DAC, Analog Sidetone, cellphone, buzzer softstepping enabled
 	 * 1dB AGC hysteresis
 	 * MICes bias 2V
 	 */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-			TSC2101_AUDIO_CTRL_4, 
-			AC4_MB_HED(0));
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_4, AC4_MB_HED(0));
 
 	/* DAC left and right routed to SPK1/SPK2
 	 * SPK1/SPK2 unmuted
-	 * keyclicks routed to SPK1/SPK2
-	 */
-	val	= AC5_DIFFIN |
+	 * Keyclicks routed to SPK1/SPK2 */
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_5, 
+			AC5_DIFFIN |
 			AC5_DAC2SPK1(3) | AC5_AST2SPK1 | AC5_KCL2SPK1 |
-			AC5_DAC2SPK2(3) | AC5_AST2SPK2 | AC5_KCL2SPK2 |
-			AC5_HDSCPTC;
-	val	= val & ~AC5_HDSCPTC;
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_AUDIO_CTRL_5,
-			val);
-	
-	/* powerdown spk1/out32n and spk2 */
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-				TSC2101_POWERDOWN_STS);
-	val	= val & ~(~PS_SPK1FL | ~PS_HNDFL | PS_LSPKFL);
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_POWERDOWN_STS,
-			val);
-
-	/* routing selected to SPK1 goes to OUT8P/OUT84 alsa. (loudspeaker)
+			AC5_DAC2SPK2(3) | AC5_AST2SPK2 | AC5_KCL2SPK2);
+	
+	/* routing selected to SPK1 goes also to OUT8P/OUT8N. (loudspeaker)
 	 * analog sidetone routed to loudspeaker
 	 * buzzer pga routed to loudspeaker
 	 * keyclick routing to loudspeaker
@@ -381,43 +385,242 @@
 	 * Enable loudspeaker short protection control (0 = enable protection)
 	 * VGND short protection control (0 = enable protection)
 	 */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_AUDIO_CTRL_6,
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_6,
 			AC6_SPL2LSK | AC6_AST2LSK | AC6_BUZ2LSK | AC6_KCL2LSK |
-			AC6_CPI2LSK | AC6_MIC2CPO | AC6_SPL2CPO |
-			~AC6_MUTLSPK | ~AC6_MUTSPK2 | ~AC6_LDSCPTC | ~AC6_VGNDSCPTC);
+			AC6_CPI2LSK | AC6_MIC2CPO | AC6_SPL2CPO);
 	current_playback_target	= PLAYBACK_TARGET_LOUDSPEAKER;
 }
 
 void set_headphone_to_playback_target(void)
 {
-	/* power down sp1, sp2 and loudspeaker */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_CODEC_POWER_CTRL,
+	/* power down SPK1, SPK2 and loudspeaker */
+	omap_tsc2101_audio_write(TSC2101_CODEC_POWER_CTRL,
 			CPC_SP1PWDN | CPC_SP2PWDN | CPC_LDAPWDF);
 	/* ADC, DAC, Analog Sidetone, cellphone, buzzer softstepping enabled */
 	/* 1dB AGC hysteresis */
 	/* MICes bias 2V */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-				TSC2101_AUDIO_CTRL_4, 
-				AC4_MB_HED(0));
-
-	/* DAC left and right routed to SPK2 */
-	/* SPK1/2 unmuted */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_AUDIO_CTRL_5,
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_4, AC4_MB_HED(0));
+				
+	/* DAC left and right routed to SPK1/SPK2
+	 * SPK1/SPK2 unmuted
+	 * Keyclicks routed to SPK1/SPK2 */
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_5,
 			AC5_DAC2SPK1(3) | AC5_AST2SPK1 | AC5_KCL2SPK1 |
 			AC5_DAC2SPK2(3) | AC5_AST2SPK2 | AC5_KCL2SPK2 |
 			AC5_HDSCPTC);
-
-	/* OUT8P/N muted, CPOUT muted */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_AUDIO_CTRL_6,
+			
+	/* OUT8P/OUT8N muted, CPOUT muted */
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_6,
 			AC6_MUTLSPK | AC6_MUTSPK2 | AC6_LDSCPTC |
 			AC6_VGNDSCPTC);
 	current_playback_target	= PLAYBACK_TARGET_HEADPHONE;
 }
 
+void set_telephone_to_playback_target(void)
+{
+	/* 
+	 * 0110 1101 0101 1100
+	 * power down MICBIAS_HED, Analog sidetone, SPK2, DAC, 
+	 * Driver virtual ground, loudspeaker. Values D2-d5 are flags.
+	 */	 
+	omap_tsc2101_audio_write(TSC2101_CODEC_POWER_CTRL,
+			CPC_MBIAS_HED | CPC_ASTPWD | CPC_SP2PWDN | CPC_DAPWDN |
+			CPC_VGPWDN | CPC_LSPWDN);
+			
+	/* 
+	 * 0010 1010 0100 0000
+	 * ADC, DAC, Analog Sidetone, cellphone, buzzer softstepping enabled
+	 * 1dB AGC hysteresis
+	 * MICes bias 2V
+	 */
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_4,
+			AC4_MB_HND | AC4_MB_HED(0) | AC4_AGCHYS(1) | 
+			AC4_BISTPD | AC4_ASSTPD | AC4_DASTPD);
+	printk("set_telephone_to_playback_target(), TSC2101_AUDIO_CTRL_4 = %d\n", omap_tsc2101_audio_read(TSC2101_AUDIO_CTRL_4));
+			
+	/* 
+	 * 1110 0010 0000 0010
+	 * DAC left and right routed to SPK1/SPK2
+	 * SPK1/SPK2 unmuted
+	 * keyclicks routed to SPK1/SPK2
+	 */	 
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_5,
+			AC5_DIFFIN | AC5_DAC2SPK1(3) | 
+		  	AC5_CPI2SPK1 | AC5_MUTSPK2);
+	
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_6,
+			AC6_MIC2CPO | AC6_MUTLSPK | 
+			AC6_LDSCPTC | AC6_VGNDSCPTC | AC6_CAPINTF);
+	current_playback_target	= PLAYBACK_TARGET_CELLPHONE;
+}
+
+/*
+ * 1100 0101 1101 0000
+ * 
+ * #define MPC_ASTMU           TSC2101_BIT(15)
+ * #define MPC_ASTG(ARG)       (((ARG) & 0x7F) << 8)
+ * #define MPC_MICSEL(ARG)     (((ARG) & 0x07) << 5)
+ * #define MPC_MICADC          TSC2101_BIT(4)
+ * #define MPC_CPADC           TSC2101_BIT(3)
+ * #define MPC_ASTGF           (0x01)
+ */
+static void set_telephone_to_record_source(void)
+{
+	u16	val;
+	
+	/* 
+	 * D0       = 0: 
+	 * 		--> AGC is off for handset input.
+	 *		--> ADC PGA is controlled by the ADMUT_HDN + ADPGA_HND
+	 *          (D15, D14-D8)
+	 * D4 - D1  = 0000 
+	 * 		--> AGC time constant for handset input, 
+	 * 		attack time = 8 mc, decay time = 100 ms
+	 * D7 - D5  = 000
+	 * 		--> AGC Target gain for handset input = -5.5 db
+	 * D14 - D8 = 011 1100
+	 * 		--> ADC handset PGA settings = 60 = 30 db
+	 * D15 		= 0
+	 * 		--> Handset input ON (unmuted)
+	 */
+	val	= 0x3c00;	// 0011 1100 0000 0000 = 60 = 30
+	omap_tsc2101_audio_write(TSC2101_HANDSET_GAIN_CTRL, val);
+	
+	/*
+	 * D0		= 0
+	 * 		--> AGC is off for headset/Aux input
+	 * 		--> ADC headset/Aux PGA is contoller by ADMUT_HED + ADPGA_HED
+	 *          (D15, D14-D8)
+	 * D4 - D1	= 0000 
+	 * 		--> Agc constant for headset/Aux input,
+	 *      	attack time = 8 mc, decay time = 100 ms      
+	 * D7 - D5	= 000
+	 * 		--> AGC target gain for headset input = -5.5 db
+	 * D14 - D8 = 000 0000
+	 * 		--> Adc headset/AUX pga settings = 0 db
+	 * D15		= 1
+	 * 		--> Headset/AUX input muted
+	 * 
+	 * Mute headset aux input
+	 */
+	val	= 0x8000;	// 1000 0000 0000 0000
+	omap_tsc2101_audio_write(TSC2101_HEADSET_GAIN_CTRL, val);
+	set_record_source(REC_SRC_MICIN_HND_AND_AUX1);
+
+	// hacks start
+	/* D0		= flag, Headset/Aux or handset PGA flag
+	 * 		--> & with 1 (= 1 -->gain applied == pga register settings)
+	 * D1		= 0, DAC channel PGA soft stepping control
+	 * 		--> 0.5 db change every WCLK
+	 * D2		= flag, DAC right channel PGA flag
+	 * 		--> & with 1
+	 * D3		= flag, DAC left channel PGA flag
+	 * 		-- > & with 1
+	 * D7 - D4	= 0001, keyclick length
+	 * 		--> 4 periods key clicks
+	 * D10 - D8 = 100, keyclick frequenzy
+	 * 		--> 1 kHz, 
+	 * D11		= 0, Headset/Aux or handset soft stepping control
+	 * 		--> 0,5 db change every WCLK or ADWS
+	 * D14 -D12 = 100, Keyclick applitude control
+	 * 		--> Medium amplitude
+	 * D15		= 0, keyclick disabled
+	 */
+	val	= omap_tsc2101_audio_read(TSC2101_AUDIO_CTRL_2);
+	val	= val & 0x441d;
+	val	= val | 0x4410;	// D14, D10, D4 bits == 1
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_2, val);
+
+	/*
+	 * D0		= 0	(reserved, write always 0)
+	 * D1		= flag,
+	 * 			--> & with 1
+	 * D2 - D5	= 0000 (reserved, write always 0000)
+	 * D6		= 1
+	 * 			--> MICBIAS_HND = 2.0 v
+	 * D8 - D7	= 00
+	 * 			--> MICBIAS_HED = 3.3 v
+	 * D10 - D9	= 01, 
+	 * 			--> Mic AGC hysteric selection = 2 db
+	 * D11		= 1, 
+	 * 			--> Disable buzzer PGA soft stepping
+	 * D12		= 0,
+	 * 			--> Enable CELL phone PGA soft stepping control
+	 * D13		= 1
+	 * 			--> Disable analog sidetone soft stepping control
+	 * D14		= 0
+	 * 			--> Enable DAC PGA soft stepping control
+	 * D15		= 0,
+	 * 			--> Enable headset/Aux or Handset soft stepping control
+	 */
+	val	= omap_tsc2101_audio_read(TSC2101_AUDIO_CTRL_4);
+	val	= val & 0x2a42;	// 0010 1010 0100 0010
+	val	= val | 0x2a40;	// bits D13, D11, D9, D6 == 1
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_4, val);
+	printk("set_telephone_to_record_source(), TSC2101_AUDIO_CTRL_4 = %d\n", omap_tsc2101_audio_read(TSC2101_AUDIO_CTRL_4));
+	/*
+	 * D0		= 0
+	 * 		--> reserved, write always = 0
+	 * D1		= flag, read only
+	 * 		--> & with 1
+	 * D5 - D2	= 1111, Buzzer input PGA settings
+	 * 		--> 0 db
+	 * D6		= 1,
+	 * 		--> power down buzzer input pga
+	 * D7		= flag, read only
+	 * 		--> & with 1
+	 * D14 - D8	= 101 1101
+	 * 		--> 12 DB
+	 * D15		= 0
+	 * 		--> power up cell phone input PGA
+	 */
+	val	= omap_tsc2101_audio_read(TSC2101_BUZZER_GAIN_CTRL);
+	val	= val & 0x5dfe;
+	val	= val | 0x5dfe;	// bits, D14, D12, D11, D10, D8, D6, D5,D4,D3,D2
+	omap_tsc2101_audio_write(TSC2101_BUZZER_GAIN_CTRL, val);
+	
+	/* D6 - D0	= 000 1001
+	 * 		--> -4.5 db for DAC right channel volume control
+	 * D7		= 1
+	 * 		-->  DAC right channel muted
+	 * D14 - D8 = 000 1001
+	 * 		--> -4.5 db for DAC left channel volume control
+	 * D15 		= 1
+	 * 		--> DAC left channel muted
+	 */
+	//val	= omap_tsc2101_audio_read(TSC2101_DAC_GAIN_CTRL);
+	val	= 0x8989;
+	omap_tsc2101_audio_write(TSC2101_DAC_GAIN_CTRL, val);	
+	
+	/*  0000 0000 0100 0000
+	 * 
+	 * D1 - D0	= 0
+	 * 		--> GPIO 1 pin output is three stated
+	 * D2		= 0
+	 * 		--> Disaple GPIO2 for CLKOUT mode
+	 * D3		= 0
+	 * 		--> Disable GPUI1 for interrupt detection
+	 * D4		= 0
+	 * 		--> Disable GPIO2 for headset detection interrupt
+	 * D5		= reserved, always 0
+	 * D7 - D6	= 01
+	 * 		--> 8 ms clitch detection
+	 * D8		= reserved, write only 0
+	 * D10 -D9	= 00
+	 * 		--> 16 ms de bouncing programmatitily 
+	 *          for glitch detection during headset detection
+	 * D11		= flag for button press
+	 * D12		= flag for headset detection
+	 * D14-D13	= 00
+	 * 		--> type of headset detected = 00 == no stereo headset deected
+	 * D15		= 0
+	 * 		--> Disable headset detection
+	 * 
+	 * */
+	val	= 0x40;
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_7, val);	
+}
+
 /*
  * Checks whether the headset is detected.
  * If headset is detected, the type is returned. Type can be
@@ -433,8 +636,7 @@
 	u16	curVal;
 	
 	curType	= 0;	/* not detected */
-	curVal	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-					TSC2101_AUDIO_CTRL_7);
+	curVal	= omap_tsc2101_audio_read(TSC2101_AUDIO_CTRL_7);
 	curDetected	= curVal & AC7_HDDETFL;
 	if (curDetected) {
 		printk("headset detected, checking type from %d \n", curVal);
@@ -461,13 +663,10 @@
 	 * AGC enable for handset input
 	 * Handset input not muted
 	 */
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HANDSET_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_HANDSET_GAIN_CTRL);
 	val	= val | HNGC_AGCEN_HND;	
 	val	= val & ~HNGC_ADMUT_HND;
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-			TSC2101_HANDSET_GAIN_CTRL,
-			val);	
+	omap_tsc2101_audio_write(TSC2101_HANDSET_GAIN_CTRL, val);	
 			
 	/* mic input volume control
 	 * SET_MIC in the OSS driver 
@@ -479,7 +678,7 @@
 	 */
 	set_mixer_volume_as_dac_gain_control_volume(DEFAULT_OUTPUT_VOLUME, DEFAULT_OUTPUT_VOLUME);	
 	/* unmute */
-	dac_gain_control_unmute_control(1, 1);
+	dac_gain_control_unmute(1, 1);
 }
 
 /*
@@ -490,11 +689,11 @@
 	FN_IN;
 	
 	/* Headset/Hook switch detect enabled */
-	omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2,
-			TSC2101_AUDIO_CTRL_7,
-			AC7_DETECT);
+	omap_tsc2101_audio_write(TSC2101_AUDIO_CTRL_7, AC7_DETECT);
 
-	init_record_sources();
+	/* Select headset to record source (MIC_INHED)*/
+	set_record_source(REC_SRC_SINGLE_ENDED_MICIN_HED);
+	/* Init loudspeaker as a default playback target*/
 	init_playback_targets();
 
 	FN_OUT(0);
@@ -503,7 +702,7 @@
 static int __pcm_playback_target_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) 
 {
 	static char *texts[PLAYBACK_TARGET_COUNT] = {
-        	"Loudspeaker", "Headphone"
+        	"Loudspeaker", "Headphone", "Cellphone"
 	};
 
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
@@ -533,12 +732,18 @@
 	if ((curVal >= 0) &&
 	    (curVal < PLAYBACK_TARGET_COUNT) &&
 	    (curVal != current_playback_target)) {		
-		if (curVal == 0) {
-			set_loudspeaker_to_playback_target();		
+		if (curVal == PLAYBACK_TARGET_LOUDSPEAKER) {
+			set_record_source(REC_SRC_SINGLE_ENDED_MICIN_HED);
+			set_loudspeaker_to_playback_target();
 		}
-		else {
+		else if (curVal == PLAYBACK_TARGET_HEADPHONE) {
+			set_record_source(REC_SRC_SINGLE_ENDED_MICIN_HND);
 			set_headphone_to_playback_target();
 		}
+		else if (curVal == PLAYBACK_TARGET_CELLPHONE) {
+			set_telephone_to_record_source();
+			set_telephone_to_playback_target();
+		}
 		retVal	= 1;
 	}
 	return retVal;
@@ -563,7 +768,7 @@
 	u16 volR;	
 	u16 val;
 	
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_DAC_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_DAC_GAIN_CTRL);
 	M_DPRINTK("registry value = %d!\n", val);
 	volL	= DGC_DALVL_EXTRACT(val);
 	volR	= DGC_DARVL_EXTRACT(val);
@@ -603,16 +808,16 @@
  */
 static int __pcm_playback_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	u16 val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_DAC_GAIN_CTRL);
+	u16 val	= omap_tsc2101_audio_read(TSC2101_DAC_GAIN_CTRL);
 	
-	ucontrol->value.integer.value[0]	= IS_DGC_DALMU_UNMUTED(val);
-	ucontrol->value.integer.value[1]	= IS_DGC_DARMU_UNMUTED(val);
+	ucontrol->value.integer.value[0]	= IS_UNMUTED(15, val);	// left
+	ucontrol->value.integer.value[1]	= IS_UNMUTED(7, val);	// right
 	return 0;
 }
 
 static int __pcm_playback_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	return dac_gain_control_unmute_control(ucontrol->value.integer.value[0], 
+	return dac_gain_control_unmute(ucontrol->value.integer.value[0], 
 					ucontrol->value.integer.value[1]);
 }
 
@@ -630,8 +835,7 @@
 	u16 val;
 	u16 vol;
 	
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HEADSET_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_HEADSET_GAIN_CTRL);
 	M_DPRINTK("registry value = %d\n", val);
 	vol	= HGC_ADPGA_HED_EXTRACT(val);
 	vol	= vol & ~HGC_ADMUT_HED;
@@ -662,38 +866,17 @@
  */
 static int __headset_playback_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	u16 val = omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HEADSET_GAIN_CTRL);
-	ucontrol->value.integer.value[0]	= IS_DGC_HGCMU_UNMUTED(val);
+	u16 val = omap_tsc2101_audio_read(TSC2101_HEADSET_GAIN_CTRL);
+	ucontrol->value.integer.value[0]	= IS_UNMUTED(15, val);
 	return 0;
 }
 
 static int __headset_playback_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	int count = 0;
-	u16 val = omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HEADSET_GAIN_CTRL);
-	/* in alsa mixer 1 --> on, 0 == off. In tsc2101 registry 1 --> off, 0 --> on
-	 * so if values are same, it's time to change the registry value...
-	 */
-	if (ucontrol->value.integer.value[0] == GET_DGC_HGCMU_BIT_VALUE(val)) {
-		if (ucontrol->value.integer.value[0] == 0) {
-			/* mute --> turn bit on */
-			val	= val | HGC_ADMUT_HED;
-		}
-		else {
-			/* unmute --> turn bit off */
-			val	= val & ~HGC_ADMUT_HED;
-		}
-		count++;
-		M_DPRINTK("changed value, is_unmuted = %d\n", IS_DGC_HGCMU_UNMUTED(val));
-	}
-	if (count) {
-		omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HEADSET_GAIN_CTRL, 
-				val);
-	}
-	return count;
+	// mute/unmute headset
+	return adc_pga_unmute_control(ucontrol->value.integer.value[0],
+				TSC2101_HEADSET_GAIN_CTRL,
+				15);
 }
 
 static int __handset_playback_volume_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) 
@@ -710,7 +893,7 @@
 	u16 val;
 	u16 vol;
 	
-	val	= omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_HANDSET_GAIN_CTRL);
+	val	= omap_tsc2101_audio_read(TSC2101_HANDSET_GAIN_CTRL);
 	M_DPRINTK("registry value = %d\n", val);
 	vol	= HNGC_ADPGA_HND_EXTRACT(val);
 	vol	= vol & ~HNGC_ADMUT_HND;
@@ -740,42 +923,74 @@
  */
 static int __handset_playback_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	u16 val = omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_HANDSET_GAIN_CTRL);
-	ucontrol->value.integer.value[0]	= IS_DGC_HNGCMU_UNMUTED(val);
+	u16 val = omap_tsc2101_audio_read(TSC2101_HANDSET_GAIN_CTRL);
+	ucontrol->value.integer.value[0]	= IS_UNMUTED(15, val);
 	return 0;
 }
 
 static int __handset_playback_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
 {
-	int count = 0;
-	u16 val = omap_tsc2101_read(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, TSC2101_HANDSET_GAIN_CTRL);
-	
-	/* in alsa mixer 1 --> on, 0 == off. In tsc2101 registry 1 --> off, 0 --> on
-	 * so if values are same, it's time to change the registry value...
-	 */
-	if (ucontrol->value.integer.value[0] == GET_DGC_HNGCMU_BIT_VALUE(val)) {
-		if (ucontrol->value.integer.value[0] == 0) {
-			/* mute --> turn bit on */
-			val	= val | HNGC_ADMUT_HND;
-		}
-		else {
-			/* unmute --> turn bit off */
-			val	= val & ~HNGC_ADMUT_HND;
-		}
-		M_DPRINTK("changed value, is_unmuted = %d\n", IS_DGC_HNGCMU_UNMUTED(val));
-		count++;
-	}
-	if (count) {
-		omap_tsc2101_write(TSC2101_AUDIO_CODEC_REGISTERS_PAGE2, 
-				TSC2101_HANDSET_GAIN_CTRL, 
-				val);
-	}
-	return count;
+	// handset mute/unmute
+	return adc_pga_unmute_control(ucontrol->value.integer.value[0],
+				TSC2101_HANDSET_GAIN_CTRL,
+				15);
+}
+
+static int __cellphone_input_switch_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) 
+{
+	uinfo->type 			= SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count			= 1;
+	uinfo->value.integer.min	= 0;
+	uinfo->value.integer.max	= 1;
+	return 0;
+}
+
+/* When BGC_MUT_CP (bit 15) = 1, power down cellphone input pga.
+ * When BGC_MUT_CP = 0, power up cellphone input pga.
+ */
+static int __cellphone_input_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
+{
+	u16 val = omap_tsc2101_audio_read(TSC2101_BUZZER_GAIN_CTRL);
+	ucontrol->value.integer.value[0]	= IS_UNMUTED(15, val);
+	return 0;
+}
+
+static int __cellphone_input_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
+{
+	return adc_pga_unmute_control(ucontrol->value.integer.value[0],
+				TSC2101_BUZZER_GAIN_CTRL,
+				15);	
+}
+
+static int __buzzer_input_switch_info(snd_kcontrol_t *kcontrol, snd_ctl_elem_info_t *uinfo) 
+{
+	uinfo->type 			= SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count			= 1;
+	uinfo->value.integer.min	= 0;
+	uinfo->value.integer.max	= 1;
+	return 0;
+}
+
+/* When BGC_MUT_BU (bit 6) = 1, power down cellphone input pga.
+ * When BGC_MUT_BU = 0, power up cellphone input pga.
+ */
+static int __buzzer_input_switch_get(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
+{
+	u16 val = omap_tsc2101_audio_read(TSC2101_BUZZER_GAIN_CTRL);
+	ucontrol->value.integer.value[0]	= IS_UNMUTED(6, val);
+	return 0;
+}
+
+static int __buzzer_input_switch_put(snd_kcontrol_t *kcontrol, snd_ctl_elem_value_t *ucontrol) 
+{
+	return adc_pga_unmute_control(ucontrol->value.integer.value[0],
+				TSC2101_BUZZER_GAIN_CTRL,
+				6);	
 }
 
 static snd_kcontrol_new_t tsc2101_control[] __devinitdata = {
 	{
-		.name  = "Playback Playback Route",
+		.name  = "Target Playback Route",
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		.index = 0,
 		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
@@ -801,7 +1016,7 @@
 	}, {
 		.name  = "Headset Playback Volume",
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.index = 1,
+		.index = 0,
 		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
 		.info  = __headset_playback_volume_info,
 		.get   = __headset_playback_volume_get,
@@ -809,7 +1024,7 @@
 	}, {
 		.name  = "Headset Playback Switch",
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.index = 1,
+		.index = 0,
 		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
 		.info  = __headset_playback_switch_info,
 		.get   = __headset_playback_switch_get,
@@ -817,7 +1032,7 @@
 	}, {
 		.name  = "Handset Playback Volume",
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.index = 2,
+		.index = 0,
 		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
 		.info  = __handset_playback_volume_info,
 		.get   = __handset_playback_volume_get,
@@ -825,12 +1040,28 @@
 	}, {
 		.name  = "Handset Playback Switch",
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-		.index = 2,
+		.index = 0,
 		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
 		.info  = __handset_playback_switch_info,
 		.get   = __handset_playback_switch_get,
 		.put   = __handset_playback_switch_put,
-	}	
+	}, {
+		.name  = "Cellphone Input Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.index = 0,
+		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info  = __cellphone_input_switch_info,
+		.get   = __cellphone_input_switch_get,
+		.put   = __cellphone_input_switch_put,
+	}, {
+		.name  = "Buzzer Input Switch",
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.index = 0,
+		.access= SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info  = __buzzer_input_switch_info,
+		.get   = __buzzer_input_switch_get,
+		.put   = __buzzer_input_switch_put,
+	}
 };
 
 #ifdef CONFIG_PM
diff -Naur linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101-mixer.h h6300_dev/sound/arm/omap/omap-alsa-tsc2101-mixer.h
--- linux-2.6.16.16/sound/arm/omap/omap-alsa-tsc2101-mixer.h	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/sound/arm/omap/omap-alsa-tsc2101-mixer.h	2006-03-30 23:15:31.000000000 +0300
@@ -56,20 +56,21 @@
 #define INPUT_VOLUME_MAX		0x7D
 #define INPUT_VOLUME_RANGE		(INPUT_VOLUME_MAX - INPUT_VOLUME_MIN)
 
-#define PLAYBACK_TARGET_COUNT		0x02
+#define PLAYBACK_TARGET_COUNT		0x03
 #define PLAYBACK_TARGET_LOUDSPEAKER	0x00
 #define PLAYBACK_TARGET_HEADPHONE	0x01
+#define PLAYBACK_TARGET_CELLPHONE	0x02
 
 /* following are used for register 03h Mixer PGA control bits D7-D5 for selecting record source */
 #define REC_SRC_TARGET_COUNT		0x08
-#define REC_SRC_SINGLE_ENDED_MICIN_HED	MPC_MICSEL(0)	// oss code referred to MIXER_LINE
-#define REC_SRC_SINGLE_ENDED_MICIN_HND	MPC_MICSEL(1)	// oss code referred to MIXER_MIC
-#define REC_SRC_SINGLE_ENDED_AUX1	MPC_MICSEL(2)
-#define REC_SRC_SINGLE_ENDED_AUX2	MPC_MICSEL(3)
-#define REC_SRC_MICIN_HED_AND_AUX1	MPC_MICSEL(4)
-#define REC_SRC_MICIN_HED_AND_AUX2	MPC_MICSEL(5)
-#define REC_SRC_MICIN_HND_AND_AUX1	MPC_MICSEL(6)
-#define REC_SRC_MICIN_HND_AND_AUX2	MPC_MICSEL(7)
+#define REC_SRC_SINGLE_ENDED_MICIN_HED	0x00	// oss code referred to MIXER_LINE
+#define REC_SRC_SINGLE_ENDED_MICIN_HND	0x01	// oss code referred to MIXER_MIC
+#define REC_SRC_SINGLE_ENDED_AUX1	0x02
+#define REC_SRC_SINGLE_ENDED_AUX2	0x03
+#define REC_SRC_MICIN_HED_AND_AUX1	0x04
+#define REC_SRC_MICIN_HED_AND_AUX2	0x05
+#define REC_SRC_MICIN_HND_AND_AUX1	0x06
+#define REC_SRC_MICIN_HND_AND_AUX2	0x07
 
 #define DEFAULT_OUTPUT_VOLUME		90	// default output volume to dac dgc
 #define DEFAULT_INPUT_VOLUME		20	// default record volume
diff -Naur linux-2.6.16.16/sound/oss/Kconfig h6300_dev/sound/oss/Kconfig
--- linux-2.6.16.16/sound/oss/Kconfig	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/sound/oss/Kconfig	2006-02-06 15:36:21.000000000 +0200
@@ -13,8 +13,8 @@
 
 config SOUND_OMAP_TSC2101
 	tristate "TSC2101 Stereo Codec"
-	depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4 || MACH_OMAP_APOLLON)
-	select OMAP_TSC2101 if ( MACH_OMAP_H2 || MACH_OMAP_H3 )
+	depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4 || MACH_OMAP_APOLLON || MACH_OMAP_H6300)
+	select OMAP_TSC2101 if ( MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H6300 )
 	select OMAP_UWIRE if ARCH_OMAP1
 	---help---
 	  Tsc2101 Audio Codec Driver for OMAP will be enabled.
diff -Naur linux-2.6.16.16/sound/oss/omap-audio-tsc2101.c h6300_dev/sound/oss/omap-audio-tsc2101.c
--- linux-2.6.16.16/sound/oss/omap-audio-tsc2101.c	2006-05-17 21:41:31.000000000 +0300
+++ h6300_dev/sound/oss/omap-audio-tsc2101.c	2006-04-02 00:23:01.000000000 +0300
@@ -48,7 +48,7 @@
 #include "omap-audio.h"
 #include "omap-audio-dma-intfc.h"
 #include <asm/arch/mcbsp.h>
-#ifdef CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_MACH_OMAP_H6300)
 #include <../drivers/ssi/omap-uwire.h>
 #include <asm/arch/dsp_common.h>
 #elif defined(CONFIG_ARCH_OMAP24XX)
@@ -73,10 +73,16 @@
 
 #ifdef CONFIG_ARCH_OMAP16XX
 #define PLATFORM_NAME "OMAP16XX"
+#elif CONFIG_MACH_OMAP_H6300
+#define PLATFORM_NAME "OMAP15XX"
 #elif defined(CONFIG_ARCH_OMAP24XX)
 #define PLATFORM_NAME "OMAP2"
 #endif
 
+#if CONFIG_ARCH_OMAP16XX
+#define OMAP_DSP_BASE        0xE0000000
+#endif
+
 /* Define to set the tsc as the master w.r.t McBSP */
 #define TSC_MASTER
 
@@ -123,7 +129,7 @@
 /*********** Debug Macros ********/
 /* To Generate a rather shrill tone -test the entire path */
 //#define TONE_GEN
-/* To Generate a tone for each keyclick - test the tsc,spi paths*/
+///* To Generate a tone for each keyclick - test the tsc,spi paths*/
 //#define TEST_KEYCLICK
 /* To dump the tsc registers for debug */
 //#define TSC_DUMP_REGISTERS
@@ -230,6 +236,17 @@
 };
 
 static struct omap_mcbsp_reg_cfg initial_config = {
+#ifdef CONFIG_MACH_OMAP_H6300
+	.spcr2 = 0x0005,
+	.spcr1 = 0x0005,
+	.rcr2  = 0x8041,
+	.rcr1  = 0x8041,
+	.xcr2  = 0x00a1,
+	.xcr1  = 0x00a1,
+	.srgr2 = 0xb000,
+	.srgr1 = 0xb000,
+	.pcr0  = 0x0081,
+#else
 	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
 	.spcr1 = RINTM(3) | RRST,
 	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
@@ -253,6 +270,7 @@
 #endif				/* tsc Master defs */
 
 #endif				/* platform specific inits */
+#endif /* CONFIG_MACH_OMAP_H6300 */
 };
 
 /***************************** MODULES SPECIFIC FUNCTION PROTOTYPES ********************/