path: root/packages/linux/handhelds-sa-2.4.19-rmk6-pxa1-hh36.12/ipsec.patch

--- linux/net/Makefile	3 Dec 2003 19:15:16 -0000	1.25
+++ linux/net/Makefile	20 Feb 2003 15:50:38 -0000	1.24
@@ -19,6 +19,7 @@
 subdir-$(CONFIG_NETFILTER)	+= ipv4/netfilter
 subdir-$(CONFIG_UNIX)		+= unix
 subdir-$(CONFIG_IPV6)		+= ipv6
+subdir-$(CONFIG_IPSEC)		+= ipsec
 
 ifneq ($(CONFIG_IPV6),n)
 ifneq ($(CONFIG_IPV6),)
--- /dev/null	2004-02-02 20:32:13.000000000 +0000
+++ linux/include/zlib/zlib.h	2004-07-05 23:56:59.000000000 +0100
@@ -0,0 +1,893 @@
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+  version 1.1.4, March 11th, 2002
+
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+#include "zconf.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define ZLIB_VERSION "1.1.4"
+
+/* 
+     The 'zlib' compression library provides in-memory compression and
+  decompression functions, including integrity checks of the uncompressed
+  data.  This version of the library supports only one compression method
+  (deflation) but other algorithms will be added later and will have the same
+  stream interface.
+
+     Compression can be done in a single step if the buffers are large
+  enough (for example if an input file is mmap'ed), or can be done by
+  repeated calls of the compression function.  In the latter case, the
+  application must provide more input and/or consume the output
+  (providing more output space) before each call.
+
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+    Bytef    *next_in;  /* next input byte */
+    uInt     avail_in;  /* number of bytes available at next_in */
+    uLong    total_in;  /* total nb of input bytes read so far */
+
+    Bytef    *next_out; /* next output byte should be put there */
+    uInt     avail_out; /* remaining free space at next_out */
+    uLong    total_out; /* total nb of bytes output so far */
+
+    const char     *msg;      /* last error message, NULL if no error */
+    struct internal_state FAR *state; /* not visible by applications */
+
+    alloc_func zalloc;  /* used to allocate the internal state */
+    free_func  zfree;   /* used to free the internal state */
+    voidpf     opaque;  /* private data object passed to zalloc and zfree */
+
+    int     data_type;  /* best guess about the data type: ascii or binary */
+    uLong   adler;      /* adler32 value of the uncompressed data */
+    uLong   reserved;   /* reserved for future use */
+} z_stream;
+
+typedef z_stream FAR *z_streamp;
+
+/*
+   The application must update next_in and avail_in when avail_in has
+   dropped to zero. It must update next_out and avail_out when avail_out
+   has dropped to zero. The application must initialize zalloc, zfree and
+   opaque before calling the init function. All other fields are set by the
+   compression library and must not be updated by the application.
+
+   The opaque value provided by the application will be passed as the first
+   parameter for calls of zalloc and zfree. This can be useful for custom
+   memory management. The compression library attaches no meaning to the
+   opaque value.
+
+   zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
+   On 16-bit systems, the functions zalloc and zfree must be able to allocate
+   exactly 65536 bytes, but will not be required to allocate more than this
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+   The fields total_in and total_out can be used for statistics or
+   progress reports. After compression, total_in holds the total size of
+   the uncompressed data and may be saved for use in the decompressor
+   (particularly if the decompressor wants to decompress everything in
+   a single step).
+*/
+
+                        /* constants */
+
+#define Z_NO_FLUSH      0
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_SYNC_FLUSH    2
+#define Z_FULL_FLUSH    3
+#define Z_FINISH        4
+/* Allowed flush values; see deflate() below for details */
+
+#define Z_OK            0
+#define Z_STREAM_END    1
+#define Z_NEED_DICT     2
+#define Z_ERRNO        (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR   (-3)
+#define Z_MEM_ERROR    (-4)
+#define Z_BUF_ERROR    (-5)
+#define Z_VERSION_ERROR (-6)
+/* Return codes for the compression/decompression functions. Negative
+ * values are errors, positive values are used for special but normal events.
+ */
+
+#define Z_NO_COMPRESSION         0
+#define Z_BEST_SPEED             1
+#define Z_BEST_COMPRESSION       9
+#define Z_DEFAULT_COMPRESSION  (-1)
+/* compression levels */
+
+#define Z_FILTERED            1
+#define Z_HUFFMAN_ONLY        2
+#define Z_DEFAULT_STRATEGY    0
+/* compression strategy; see deflateInit2() below for details */
+
+#define Z_BINARY   0
+#define Z_ASCII    1
+#define Z_UNKNOWN  2
+/* Possible values of the data_type field */
+
+#define Z_DEFLATED   8
+/* The deflate compression method (the only one supported in this version) */
+
+#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
+
+                        /* basic functions */
+
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by deflateInit and inflateInit.
+ */
+
+/* 
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
+
+     Initializes the internal stream state for compression. The fields
+   zalloc, zfree and opaque must be initialized before by the caller.
+   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
+   use default allocation functions.
+
+     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
+   1 gives best speed, 9 gives best compression, 0 gives no compression at
+   all (the input data is simply copied a block at a time).
+   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
+   compression (currently equivalent to level 6).
+
+     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
+   with the version assumed by the caller (ZLIB_VERSION).
+   msg is set to null if there is no error message.  deflateInit does not
+   perform any compression: this will be done by deflate().
+*/
+
+
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
+/*
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
+
+  - Compress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in and avail_in are updated and
+    processing will resume at this point for the next call of deflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly. This action is forced if the parameter flush is non zero.
+    Forcing flush frequently degrades the compression ratio, so this parameter
+    should be set only when necessary (in interactive applications).
+    Some output may be provided even if flush is not set.
+
+  Before the call of deflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating avail_in or avail_out accordingly; avail_out
+  should never be zero before the call. The application can consume the
+  compressed output when it wants, for example when the output buffer is full
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
+
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
+  was enough output space; if deflate returns with Z_OK, this function must be
+  called again with Z_FINISH and more output space (updated avail_out) but no
+  more input data, until it returns with Z_STREAM_END or an error. After
+  deflate has returned Z_STREAM_END, the only possible operations on the
+  stream are deflateReset or deflateEnd.
+  
+    Z_FINISH can be used immediately after deflateInit if all the compression
+  is to be done in a single step. In this case, avail_out must be at least
+  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
+  Z_STREAM_END, then it must be called again as described above.
+
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
+    deflate() may update data_type if it can make a good guess about
+  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
+  binary. This field is only for information purposes and does not affect
+  the compression algorithm in any manner.
+
+    deflate() returns Z_OK if some progress has been made (more input
+  processed or more output produced), Z_STREAM_END if all input has been
+  consumed and all output has been produced (only when flush is set to
+  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
+*/
+
+
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
+   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
+   prematurely (some input or output was discarded). In the error case,
+   msg may be set but then points to a static string (which must not be
+   deallocated).
+*/
+
+
+/* 
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
+
+     Initializes the internal stream state for decompression. The fields
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
+
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
+*/
+
+
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
+/*
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
+
+  - Decompress more input starting at next_in and update next_in and avail_in
+    accordingly. If not all input can be processed (because there is not
+    enough room in the output buffer), next_in is updated and processing
+    will resume at this point for the next call of inflate().
+
+  - Provide more output starting at next_out and update next_out and avail_out
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
+
+  Before the call of inflate(), the application should ensure that at least
+  one of the actions is possible, by providing more input and/or consuming
+  more output, and updating the next_* and avail_* values accordingly.
+  The application can consume the uncompressed output when it wants, for
+  example when the output buffer is full (avail_out == 0), or after each
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
+
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
+  output as possible to the output buffer. The flushing behavior of inflate is
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
+  and Z_FINISH, but the current implementation actually flushes as much output
+  as possible anyway.
+
+    inflate() should normally be called until it returns Z_STREAM_END or an
+  error. However if all decompression is to be performed in a single step
+  (a single call of inflate), the parameter flush should be set to
+  Z_FINISH. In this case all pending input is processed and all pending
+  output is flushed; avail_out must be large enough to hold all the
+  uncompressed data. (The size of the uncompressed data may have been saved
+  by the compressor for this purpose.) The next operation on this stream must
+  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+  is never required, but can be used to inform inflate that a faster routine
+  may be used for the single inflate() call.
+
+     If a preset dictionary is needed at this point (see inflateSetDictionary
+  below), inflate sets strm-adler to the adler32 checksum of the
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
+  it sets strm->adler to the adler32 checksum of all output produced
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+  an error code as described below. At the end of the stream, inflate()
+  checks that its computed adler32 checksum is equal to that saved by the
+  compressor and returns Z_STREAM_END only if the checksum is correct.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
+*/
+
+
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
+/*
+     All dynamically allocated data structures for this stream are freed.
+   This function discards any unprocessed input and does not flush any
+   pending output.
+
+     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+   was inconsistent. In the error case, msg may be set but then points to a
+   static string (which must not be deallocated).
+*/
+
+                        /* Advanced functions */
+
+/*
+    The following functions are needed only in some special applications.
+*/
+
+/*   
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
+
+     This is another version of deflateInit with more compression options. The
+   fields next_in, zalloc, zfree and opaque must be initialized before by
+   the caller.
+
+     The method parameter is the compression method. It must be Z_DEFLATED in
+   this version of the library.
+
+     The windowBits parameter is the base two logarithm of the window size
+   (the size of the history buffer).  It should be in the range 8..15 for this
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
+
+     The memLevel parameter specifies how much memory should be allocated
+   for the internal compression state. memLevel=1 uses minimum memory but
+   is slow and reduces compression ratio; memLevel=9 uses maximum memory
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.
+
+     The strategy parameter is used to tune the compression algorithm. Use the
+   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
+   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
+   string match).  Filtered data consists mostly of small values with a
+   somewhat random distribution. In this case, the compression algorithm is
+   tuned to compress them better. The effect of Z_FILTERED is to force more
+   Huffman coding and less string matching; it is somewhat intermediate
+   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
+   the compression ratio but not the correctness of the compressed output even
+   if it is not set appropriately.
+
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
+*/
+                            
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
+   dictionary (see inflateSetDictionary).
+
+     The dictionary should consist of strings (byte sequences) that are likely
+   to be encountered later in the data to be compressed, with the most commonly
+   used strings preferably put towards the end of the dictionary. Using a
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
+     Upon return of this function, strm->adler is set to the Adler32 value
+   of the dictionary; the decompressor may later use this value to determine
+   which dictionary has been used by the compressor. (The Adler32 value
+   applies to the whole dictionary even if only a subset of the dictionary is
+   actually used by the compressor.)
+
+     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
+*/
+
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
+/*
+     Sets the destination stream as a complete copy of the source stream.
+
+     This function can be useful when several compression strategies will be
+   tried, for example when there are several ways of pre-processing the input
+   data with a filter. The streams that will be discarded should then be freed
+   by calling deflateEnd.  Note that deflateCopy duplicates the internal
+   compression state which can be quite large, so this strategy is slow and
+   can consume lots of memory.
+
+     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
+   (such as zalloc being NULL). msg is left unchanged in both source and
+   destination.
+*/
+
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to deflateEnd followed by deflateInit,
+   but does not free and reallocate all the internal compression state.
+   The stream will keep the same compression level and any other attributes
+   that may have been set by deflateInit2.
+
+      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+				      int level,
+				      int strategy));
+/*
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
+
+     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
+*/
+
+/*   
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
+
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
+
+     The windowBits parameter is the base two logarithm of the maximum window
+   size (the size of the history buffer).  It should be in the range 8..15 for
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. If a compressed stream with a larger window size is given as
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
+   trying to allocate a larger window.
+
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+   memLevel). msg is set to null if there is no error message.  inflateInit2
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by inflate(). (So next_in and avail_in may be
+   modified, but next_out and avail_out are unchanged.)
+*/
+
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
+/*
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   inflate. The compressor and decompressor must use exactly the same
+   dictionary (see deflateSetDictionary).
+
+     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
+   expected one (incorrect Adler32 value). inflateSetDictionary does not
+   perform any decompression: this will be done by subsequent calls of
+   inflate().
+*/
+
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
+/* 
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
+
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+  case, the application may save the current current value of total_in which
+  indicates where valid compressed data was found. In the error case, the
+  application may repeatedly call inflateSync, providing more input each time,
+  until success or end of the input data.
+*/
+
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
+/*
+     This function is equivalent to inflateEnd followed by inflateInit,
+   but does not free and reallocate all the internal decompression state.
+   The stream will keep attributes that may have been set by inflateInit2.
+
+      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+
+                        /* utility functions */
+
+/*
+     The following utility functions are implemented on top of the
+   basic stream-oriented functions. To simplify the interface, some
+   default options are assumed (compression level and memory usage,
+   standard memory allocation functions). The source code of these
+   utility functions can easily be modified if you need special options.
+*/
+
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
+/*
+     Compresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be at least 0.1% larger than
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
+   compressed buffer.
+     This function can be used to compress a whole file at once if the
+   input file is mmap'ed.
+     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer.
+*/
+
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
+/*
+     Decompresses the source buffer into the destination buffer.  sourceLen is
+   the byte length of the source buffer. Upon entry, destLen is the total
+   size of the destination buffer, which must be large enough to hold the
+   entire uncompressed data. (The size of the uncompressed data must have
+   been saved previously by the compressor and transmitted to the decompressor
+   by some mechanism outside the scope of this compression library.)
+   Upon exit, destLen is the actual size of the compressed buffer.
+     This function can be used to decompress a whole file at once if the
+   input file is mmap'ed.
+
+     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
+   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   buffer, or Z_DATA_ERROR if the input data was corrupted.
+*/
+
+
+typedef voidp gzFile;
+
+ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
+/*
+     Opens a gzip (.gz) file for reading or writing. The mode parameter
+   is as in fopen ("rb" or "wb") but can also include a compression level
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of deflateInit2 for more information about the strategy parameter.)
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
+     gzopen returns NULL if the file could not be opened or if there was
+   insufficient memory to allocate the (de)compression state; errno
+   can be checked to distinguish the two cases (if errno is zero, the
+   zlib error is Z_MEM_ERROR).  */
+
+ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
+/*
+     gzdopen() associates a gzFile with the file descriptor fd.  File
+   descriptors are obtained from calls like open, dup, creat, pipe or
+   fileno (in the file has been previously opened with fopen).
+   The mode parameter is as in gzopen.
+     The next call of gzclose on the returned gzFile will also close the
+   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
+   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
+     gzdopen returns NULL if there was insufficient memory to allocate
+   the (de)compression state.
+*/
+
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy. See the description
+   of deflateInit2 for the meaning of these parameters.
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+/*
+     Reads the given number of uncompressed bytes from the compressed file.
+   If the input file was not in gzip format, gzread copies the given number
+   of bytes into the buffer.
+     gzread returns the number of uncompressed bytes actually read (0 for
+   end of file, -1 for error). */
+
+ZEXTERN int ZEXPORT    gzwrite OF((gzFile file, 
+				   const voidp buf, unsigned len));
+/*
+     Writes the given number of uncompressed bytes into the compressed file.
+   gzwrite returns the number of uncompressed bytes actually written
+   (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+      gzgets returns buf, or Z_NULL in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
+/*
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
+/*
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
+/*
+     Flushes all pending output into the compressed file. The parameter
+   flush is as in the deflate() function. The return value is the zlib
+   error number (see function gzerror below). gzflush returns Z_OK if
+   the flush parameter is Z_FINISH and all output could be flushed.
+     gzflush should be called only when strictly necessary because it can
+   degrade compression.
+*/
+
+ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
+				      z_off_t offset, int whence));
+/* 
+      Sets the starting position for the next gzread or gzwrite on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+/*
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+
+   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
+/*
+     Flushes all pending output if necessary, closes the compressed file
+   and deallocates all the (de)compression state. The return value is the zlib
+   error number (see function gzerror below).
+*/
+
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+/*
+     Returns the error message for the last error which occurred on the
+   given compressed file. errnum is set to zlib error number. If an
+   error occurred in the file system and not in the compression library,
+   errnum is set to Z_ERRNO and the application may consult errno
+   to get the exact error code.
+*/
+
+                        /* checksum functions */
+
+/*
+     These functions are not related to compression but are exported
+   anyway because they might be useful in applications using the
+   compression library.
+*/
+
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+
+/*
+     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+   return the updated checksum. If buf is NULL, this function returns
+   the required initial value for the checksum.
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+   much faster. Usage example:
+
+     uLong adler = adler32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       adler = adler32(adler, buffer, length);
+     }
+     if (adler != original_adler) error();
+*/
+
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+/*
+     Update a running crc with the bytes buf[0..len-1] and return the updated
+   crc. If buf is NULL, this function returns the required initial value
+   for the crc. Pre- and post-conditioning (one's complement) is performed
+   within this function so it shouldn't be done by the application.
+   Usage example:
+
+     uLong crc = crc32(0L, Z_NULL, 0);
+
+     while (read_buffer(buffer, length) != EOF) {
+       crc = crc32(crc, buffer, length);
+     }
+     if (crc != original_crc) error();
+*/
+
+
+                        /* various hacks, don't look :) */
+
+/* deflateInit and inflateInit are macros to allow checking the zlib version
+ * and the compiler's view of z_stream:
+ */
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
+#define deflateInit(strm, level) \
+        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit(strm) \
+        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
+        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+#define inflateInit2(strm, windowBits) \
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
+    struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+ZEXTERN const char   * ZEXPORT zError           OF((int err));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ZLIB_H */
--- /dev/null	2004-02-02 20:32:13.000000000 +0000
+++ linux/include/zlib/zutil.h	2004-07-05 23:59:30.000000000 +0100
@@ -0,0 +1,225 @@
+/* zutil.h -- internal interface and configuration of the compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* @(#) $Id: zutil.h,v 1.1 2004/07/05 22:59:30 pb Exp $ */
+
+#ifndef _Z_UTIL_H
+#define _Z_UTIL_H
+
+#include "zlib.h"
+
+#include <linux/string.h>
+#define HAVE_MEMCPY
+
+#if 0 // #ifdef STDC
+#  include <stddef.h>
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+#ifndef __KERNEL__
+#ifdef NO_ERRNO_H
+    extern int errno;
+#else
+#   include <errno.h>
+#endif
+#endif
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+typedef unsigned char  uch;
+typedef uch FAR uchf;
+typedef unsigned short ush;
+typedef ush FAR ushf;
+typedef unsigned long  ulg;
+
+extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
+/* (size given to avoid silly warnings with Visual C++) */
+
+#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
+
+#define ERR_RETURN(strm,err) \
+  return (strm->msg = ERR_MSG(err), (err))
+/* To be used only when the state is known to be valid */
+
+        /* common constants */
+
+#ifndef DEF_WBITS
+#  define DEF_WBITS MAX_WBITS
+#endif
+/* default windowBits for decompression. MAX_WBITS is for compression only */
+
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#endif
+/* default memLevel */
+
+#define STORED_BLOCK 0
+#define STATIC_TREES 1
+#define DYN_TREES    2
+/* The three kinds of block type */
+
+#define MIN_MATCH  3
+#define MAX_MATCH  258
+/* The minimum and maximum match lengths */
+
+#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
+
+        /* target dependencies */
+
+#ifdef MSDOS
+#  define OS_CODE  0x00
+#  if defined(__TURBOC__) || defined(__BORLANDC__)
+#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+       /* Allow compilation with ANSI keywords only enabled */
+       void _Cdecl farfree( void *block );
+       void *_Cdecl farmalloc( unsigned long nbytes );
+#    else
+#     include <alloc.h>
+#    endif
+#  else /* MSC or DJGPP */
+#    include <malloc.h>
+#  endif
+#endif
+
+#ifdef OS2
+#  define OS_CODE  0x06
+#endif
+
+#ifdef WIN32 /* Window 95 & Windows NT */
+#  define OS_CODE  0x0b
+#endif
+
+#if defined(VAXC) || defined(VMS)
+#  define OS_CODE  0x02
+#  define F_OPEN(name, mode) \
+     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
+#endif
+
+#ifdef AMIGA
+#  define OS_CODE  0x01
+#endif
+
+#if defined(ATARI) || defined(atarist)
+#  define OS_CODE  0x05
+#endif
+
+#if defined(MACOS) || defined(TARGET_OS_MAC)
+#  define OS_CODE  0x07
+#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#    include <unix.h> /* for fdopen */
+#  else
+#    ifndef fdopen
+#      define fdopen(fd,mode) NULL /* No fdopen() */
+#    endif
+#  endif
+#endif
+
+#ifdef __50SERIES /* Prime/PRIMOS */
+#  define OS_CODE  0x0F
+#endif
+
+#ifdef TOPS20
+#  define OS_CODE  0x0a
+#endif
+
+#if defined(_BEOS_) || defined(RISCOS)
+#  define fdopen(fd,mode) NULL /* No fdopen() */
+#endif
+
+#if (defined(_MSC_VER) && (_MSC_VER > 600))
+#  define fdopen(fd,type)  _fdopen(fd,type)
+#endif
+
+
+        /* Common defaults */
+
+#ifndef OS_CODE
+#  define OS_CODE  0x03  /* assume Unix */
+#endif
+
+#ifndef F_OPEN
+#  define F_OPEN(name, mode) fopen((name), (mode))
+#endif
+
+         /* functions */
+
+#ifdef HAVE_STRERROR
+   extern char *strerror OF((int));
+#  define zstrerror(errnum) strerror(errnum)
+#else
+#  define zstrerror(errnum) ""
+#endif
+
+#if defined(pyr)
+#  define NO_MEMCPY
+#endif
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
+ /* Use our own functions for small and medium model with MSC <= 5.0.
+  * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
+  */
+#  define NO_MEMCPY
+#endif
+#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
+#  define HAVE_MEMCPY
+#endif
+#ifdef HAVE_MEMCPY
+#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
+#    define zmemcpy _fmemcpy
+#    define zmemcmp _fmemcmp
+#    define zmemzero(dest, len) _fmemset(dest, 0, len)
+#  else
+#    define zmemcpy memcpy
+#    define zmemcmp memcmp
+#    define zmemzero(dest, len) memset(dest, 0, len)
+#  endif
+#else
+   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
+   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
+   extern void zmemzero OF((Bytef* dest, uInt len));
+#endif
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  include <stdio.h>
+   extern int z_verbose;
+   extern void z_error    OF((char *m));
+#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
+#else
+#  define Assert(cond,msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c,x)
+#  define Tracecv(c,x)
+#endif
+
+
+typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
+				       uInt len));
+voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
+void   zcfree  OF((voidpf opaque, voidpf ptr));
+
+#define ZALLOC(strm, items, size) \
+           (*((strm)->zalloc))((strm)->opaque, (items), (size))
+#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
+#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
+
+#endif /* _Z_UTIL_H */
--- /dev/null	2004-02-02 20:32:13.000000000 +0000
+++ linux/include/zconf.h	2004-07-04 15:38:31.000000000 +0100
@@ -0,0 +1,309 @@
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* @(#) $Id: zconf.h,v 1.2 2004/02/22 06:48:23 mcr Exp $ */
+
+#ifndef _ZCONF_H
+#define _ZCONF_H
+
+/*
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ */
+#ifdef IPCOMP_PREFIX
+#  define deflateInit_	ipcomp_deflateInit_
+#  define deflate	ipcomp_deflate
+#  define deflateEnd	ipcomp_deflateEnd
+#  define inflateInit_ 	ipcomp_inflateInit_
+#  define inflate	ipcomp_inflate
+#  define inflateEnd	ipcomp_inflateEnd
+#  define deflateInit2_	ipcomp_deflateInit2_
+#  define deflateSetDictionary ipcomp_deflateSetDictionary
+#  define deflateCopy	ipcomp_deflateCopy
+#  define deflateReset	ipcomp_deflateReset
+#  define deflateParams	ipcomp_deflateParams
+#  define inflateInit2_	ipcomp_inflateInit2_
+#  define inflateSetDictionary ipcomp_inflateSetDictionary
+#  define inflateSync	ipcomp_inflateSync
+#  define inflateSyncPoint ipcomp_inflateSyncPoint
+#  define inflateReset	ipcomp_inflateReset
+#  define compress	ipcomp_compress
+#  define compress2	ipcomp_compress2
+#  define uncompress	ipcomp_uncompress
+#  define adler32	ipcomp_adler32
+#  define crc32		ipcomp_crc32
+#  define get_crc_table ipcomp_get_crc_table
+/* SSS: these also need to be prefixed to avoid clash with ppp_deflate and ext2compression */
+#  define inflate_blocks ipcomp_deflate_blocks
+#  define inflate_blocks_free ipcomp_deflate_blocks_free
+#  define inflate_blocks_new ipcomp_inflate_blocks_new
+#  define inflate_blocks_reset ipcomp_inflate_blocks_reset
+#  define inflate_blocks_sync_point ipcomp_inflate_blocks_sync_point
+#  define inflate_set_dictionary ipcomp_inflate_set_dictionary
+#  define inflate_codes ipcomp_inflate_codes
+#  define inflate_codes_free ipcomp_inflate_codes_free
+#  define inflate_codes_new ipcomp_inflate_codes_new
+#  define inflate_fast ipcomp_inflate_fast
+#  define inflate_trees_bits ipcomp_inflate_trees_bits
+#  define inflate_trees_dynamic ipcomp_inflate_trees_dynamic
+#  define inflate_trees_fixed ipcomp_inflate_trees_fixed
+#  define inflate_flush ipcomp_inflate_flush
+#  define inflate_mask ipcomp_inflate_mask
+#  define _dist_code _ipcomp_dist_code
+#  define _length_code _ipcomp_length_code
+#  define _tr_align _ipcomp_tr_align
+#  define _tr_flush_block _ipcomp_tr_flush_block
+#  define _tr_init _ipcomp_tr_init
+#  define _tr_stored_block _ipcomp_tr_stored_block
+#  define _tr_tally _ipcomp_tr_tally
+#  define zError ipcomp_zError
+#  define z_errmsg ipcomp_z_errmsg
+#  define zlibVersion ipcomp_zlibVersion
+#  define match_init ipcomp_match_init
+#  define longest_match ipcomp_longest_match
+#endif
+
+#ifdef Z_PREFIX
+#  define Byte		z_Byte
+#  define uInt		z_uInt
+#  define uLong		z_uLong
+#  define Bytef	        z_Bytef
+#  define charf		z_charf
+#  define intf		z_intf
+#  define uIntf		z_uIntf
+#  define uLongf	z_uLongf
+#  define voidpf	z_voidpf
+#  define voidp		z_voidp
+#endif
+
+#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
+#  define WIN32
+#endif
+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
+#  ifndef __32BIT__
+#    define __32BIT__
+#  endif
+#endif
+#if defined(__MSDOS__) && !defined(MSDOS)
+#  define MSDOS
+#endif
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ */
+#if defined(MSDOS) && !defined(__32BIT__)
+#  define MAXSEG_64K
+#endif
+#ifdef MSDOS
+#  define UNALIGNED_OK
+#endif
+
+#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
+#  define STDC
+#endif
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#  ifndef STDC
+#    define STDC
+#  endif
+#endif
+
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const
+#  endif
+#endif
+
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+#  define NO_DUMMY_DECL
+#endif
+
+/* Old Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+#  define NEED_DUMMY_RETURN
+#endif
+
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
+#    define MAX_MEM_LEVEL 8
+#  else
+#    define MAX_MEM_LEVEL 9
+#  endif
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+                        /* Type declarations */
+
+#ifndef OF /* function prototypes */
+#  ifdef STDC
+#    define OF(args)  args
+#  else
+#    define OF(args)  ()
+#  endif
+#endif
+
+/* The following definitions for FAR are needed only for MSDOS mixed
+ * model programming (small or medium model with some far allocations).
+ * This was tested only with MSC; for other MSDOS compilers you may have
+ * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
+ * just define FAR to be empty.
+ */
+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
+   /* MSC small or medium model */
+#  define SMALL_MEDIUM
+#  ifdef _MSC_VER
+#    define FAR _far
+#  else
+#    define FAR far
+#  endif
+#endif
+#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
+#  ifndef __32BIT__
+#    define SMALL_MEDIUM
+#    define FAR _far
+#  endif
+#endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if defined(ZLIB_DLL)
+#  if defined(_WINDOWS) || defined(WINDOWS)
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+#    define ZEXPORT  WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA  WINAPIV
+#    else
+#      define ZEXPORTVA  FAR _cdecl _export
+#    endif
+#  endif
+#  if defined (__BORLANDC__)
+#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
+#      include <windows.h>
+#      define ZEXPORT __declspec(dllexport) WINAPI
+#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
+#    else
+#      if defined (_Windows) && defined (__DLL__)
+#        define ZEXPORT _export
+#        define ZEXPORTVA _export
+#      endif
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  if defined (ZLIB_DLL)
+#    define ZEXTERN extern __declspec(dllexport)
+#  else
+#    define ZEXTERN extern __declspec(dllimport)
+#  endif
+#endif
+
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+
+#ifndef FAR
+#   define FAR
+#endif
+
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
+typedef unsigned char  Byte;  /* 8 bits */
+#endif
+typedef unsigned int   uInt;  /* 16 bits or more */
+typedef unsigned long  uLong; /* 32 bits or more */
+
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+   typedef void FAR *voidpf;
+   typedef void     *voidp;
+#else
+   typedef Byte FAR *voidpf;
+   typedef Byte     *voidp;
+#endif
+
+#ifdef HAVE_UNISTD_H
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  define z_off_t  off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define  z_off_t long
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(inflate_blocks,"INBL")
+#   pragma map(inflate_blocks_new,"INBLNE")
+#   pragma map(inflate_blocks_free,"INBLFR")
+#   pragma map(inflate_blocks_reset,"INBLRE")
+#   pragma map(inflate_codes_free,"INCOFR")
+#   pragma map(inflate_codes,"INCO")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_flush,"INFLU")
+#   pragma map(inflate_mask,"INMA")
+#   pragma map(inflate_set_dictionary,"INSEDI2")
+#   pragma map(ipcomp_inflate_copyright,"INCOPY")
+#   pragma map(inflate_trees_bits,"INTRBI")
+#   pragma map(inflate_trees_dynamic,"INTRDY")
+#   pragma map(inflate_trees_fixed,"INTRFI")
+#   pragma map(inflate_trees_free,"INTRFR")
+#endif
+
+#endif /* _ZCONF_H */