path: root/packages/linux/devkitidp-pxa255-2.6.19/linux-2.6.19_devkitidp1.patch

Index: linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig
===================================================================
--- linux-2.6.19.orig/arch/arm/configs/pxa255-idp_defconfig
+++ linux-2.6.19/arch/arm/configs/pxa255-idp_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 22:20:17 2005
+# Linux kernel version: 2.6.13
+# Fri Sep  2 11:36:29 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
@@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -34,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -50,11 +52,12 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 
 #
 # System Type
@@ -79,6 +82,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # Intel PXA2xx Implementations
@@ -98,7 +102,6 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -109,16 +112,35 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_DEBUG=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PXA2XX=y
 
 #
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
@@ -129,7 +151,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS0,115200 mtdparts=phys_mapped_flash:256k(boot)ro,0x1C0000(kernel),-(root)"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -157,6 +179,67 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
 # Device Drivers
 #
 
@@ -165,7 +248,7 @@ CONFIG_BINFMT_ELF=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -176,7 +259,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 
 #
@@ -209,6 +292,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -222,10 +306,14 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_EDB7312 is not set
 # CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -260,10 +348,10 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_INITRAMFS_SOURCE=""
@@ -290,9 +378,11 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 
 #
@@ -307,89 +397,69 @@ CONFIG_BLK_DEV_IDEDISK=y
 #
 # SCSI device support
 #
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Multi-device support (RAID and LVM)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_MD is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Fusion MPT device support
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
 
 #
-# IEEE 1394 (FireWire) support
+# SCSI Transport Attributes
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 
 #
-# I2O device support
+# SCSI low-level drivers
 #
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
 
 #
-# Networking support
+# PCMCIA SCSI adapter support
 #
-CONFIG_NET=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
 
 #
-# Networking options
+# Multi-device support (RAID and LVM)
 #
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
+# CONFIG_MD is not set
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# Fusion MPT device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
+# CONFIG_FUSION is not set
 
 #
-# QoS and/or fair queueing
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
-# Network testing
+# I2O device support
+#
+
+#
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -402,6 +472,7 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -421,6 +492,11 @@ CONFIG_SMC91X=y
 # CONFIG_NET_RADIO is not set
 
 #
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -428,6 +504,8 @@ CONFIG_SMC91X=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -443,7 +521,7 @@ CONFIG_INPUT=y
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
@@ -455,11 +533,12 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_IDPKBD=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -470,10 +549,8 @@ CONFIG_KEYBOARD_ATKBD=y
 #
 CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -516,18 +593,28 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -551,10 +638,12 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_PXA=y
 # CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -563,15 +652,9 @@ CONFIG_FB_PXA=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
 
 #
 # Logo configuration
@@ -592,7 +675,116 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
 
 #
 # USB Gadget Support
@@ -602,17 +794,23 @@ CONFIG_USB_ARCH_HAS_HCD=y
 #
 # MMC/SD Card support
 #
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -620,6 +818,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -636,8 +835,9 @@ CONFIG_DNOTIFY=y
 #
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -645,7 +845,6 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -664,8 +863,7 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -687,6 +885,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
Index: linux-2.6.19/arch/arm/mach-pxa/Kconfig
===================================================================
--- linux-2.6.19.orig/arch/arm/mach-pxa/Kconfig
+++ linux-2.6.19/arch/arm/mach-pxa/Kconfig
@@ -21,7 +21,7 @@ config MACH_MAINSTONE
 	select IWMMXT
 
 config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
+	bool "DevKitIDP PXA255"
 	select PXA25x
 
 config PXA_SHARPSL
Index: linux-2.6.19/drivers/input/keyboard/idpkbd.c
===================================================================
--- /dev/null
+++ linux-2.6.19/drivers/input/keyboard/idpkbd.c
@@ -0,0 +1,418 @@
+/*
+ * DevKitIDP PXA255 matrix keyboard driver
+ * Copyright (C) 2005 BSQUARE
+ * David Plentovich <davidp@bsquare.com>
+ *
+ * Based on (2.4.x) driver/char/asi_keyboard.c - Cliff Brake
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/stddef.h>
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+
+#include <linux/types.h>
+#include <linux/keyboard.h>
+#include <linux/kd.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+//#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/idp.h>
+
+MODULE_AUTHOR("David Plentovich <davidp@bsquare.com>");
+MODULE_DESCRIPTION("DevKitIDP PXA255 matrix keyboard driver");
+MODULE_LICENSE("GPL");
+
+
+//NOTE: Platform HW specific settings are defined in include/asm-arm/arch-pxa/idp.h
+
+
+// set to true to use timers to poll keyboard
+#define POLL_KEYBOARD	1
+
+
+// local variables
+
+#define FN_KEY_SCANCODE			4		//scancode returned when Fn key pressed
+#define NUMLOCK_KEY_SCANCODE	10		//scancode returned when NumLock key pressed
+
+// keyboard matrix 14 columns by 7 rows
+static unsigned char idpkbd_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \
+ KEY_LEFTALT, KEY_GRAVE, 0, KEY_LEFTCTRL, 0, KEY_ESC, KEY_1, KEY_2, KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, 0, KEY_BACKSPACE, \
+ 0, KEY_BACKSLASH, KEY_LEFTSHIFT, 0, 0, KEY_DELETE, 0, KEY_T, KEY_Y, KEY_U, KEY_I, KEY_ENTER, KEY_RIGHTSHIFT, KEY_DOWN, \
+ 0, KEY_TAB, 0, 0, 0, KEY_Q, KEY_W, KEY_E, KEY_R, KEY_O, KEY_P, KEY_LEFTBRACE, 0, KEY_RIGHTBRACE, \
+ 0, KEY_Z, 0, 0, 0, KEY_CAPSLOCK, 0, 0, KEY_K, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, 0, KEY_UP, \
+ 0, KEY_A, 0, 0, 0, KEY_S, KEY_D, KEY_F, KEY_G, KEY_H, KEY_J, KEY_SLASH, 0, KEY_LEFT, \
+ 0, KEY_X, 0, 0, 0, KEY_C, KEY_V, KEY_B, KEY_N, KEY_M, KEY_COMMA, KEY_DOT, 0, KEY_SPACE, \
+ 0, 0, 0, 0, 0, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, 0, 0, KEY_RIGHT \
+};
+
+// function key keyboard matrix 14 columns by 7 rows
+//TODO: change Fn key for +/= to be shifted version of KEY_PAUSE (instead of KEY_BACK)
+static unsigned char idpkbd_fn_keycode[(KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS)] = { \
+ 0, 0, 0, 0, 0, 0, KEY_F1, KEY_F2, KEY_F9, KEY_F10, 0, KEY_BACK, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAGEDOWN, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PAUSE, 0, KEY_SCROLLLOCK, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_PRINT, KEY_SYSRQ, 0, KEY_PAGEUP, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_HOME, \
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, 0, 0, KEY_END \
+};
+
+//NOTE: NUMLOCK and NumKeypad are not supported; keys are already accessable in other ways.
+
+int idpkbd_used = 0;
+int fn_key_active = 0;
+
+static struct input_dev * idpkbd_dev;
+
+static int scaninterval = HZ/60;	//rate to scan keyboard 
+static struct timer_list scan_timer;
+
+
+// Note: these are not hardware dependent masks, they are
+// just simple n-bit masks based on the number of ins and outs
+// All hardware dependent matrix keyboard stuff is in portable.h
+#define KEYBD_MATRIX_INPUT_MASK		((1 << KEYBD_MATRIX_NUMBER_INPUTS)-1)
+#define KEYBD_MATRIX_OUTPUT_MASK	((1 << KEYBD_MATRIX_NUMBER_OUTPUTS)-1)
+
+static __u16 keystate_prev[KEYBD_MATRIX_NUMBER_OUTPUTS];
+static __u16 keystate_test[KEYBD_MATRIX_NUMBER_OUTPUTS];
+static __u16 keystate_cur [KEYBD_MATRIX_NUMBER_OUTPUTS];
+static int keystate_prev_active = 0;	//FALSE;
+static int keystate_stable_ctr = 0;
+
+
+
+/* local function definitions */
+static void setoutput(__u16 columns)
+{
+	#ifdef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC
+		KEYBD_MATRIX_SET_OUTPUTS(~columns);
+	#else
+		KEYBD_MATRIX_SET_OUTPUTS(columns);
+	#endif
+}
+
+static __u16 scaninput(void)
+{
+	__u32 inputs;
+
+	KEYBD_MATRIX_GET_INPUTS(inputs);
+
+	#ifdef KEYBD_MATRIX_INVERT_INPUT_LOGIC
+		return (__u16)(~inputs & KEYBD_MATRIX_INPUT_MASK);
+	#else
+		return (__u16)(inputs & KEYBD_MATRIX_INPUT_MASK);
+	#endif
+}
+
+static int dokeystatetransition(void)
+{
+	unsigned char code;
+	int i, j;
+	__u16 keystate_xor[KEYBD_MATRIX_NUMBER_OUTPUTS];
+	int ret_val = 0;	//FALSE;
+	//int bFoundValidScancode = FALSE;
+	
+	/* iterate over columns */
+	for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+	{
+		if (keystate_cur[i] != 0)
+			ret_val = 1;	//TRUE;
+
+		keystate_xor[i] = keystate_prev[i] ^ keystate_cur[i];
+		if (keystate_xor[i] != 0)
+		{
+			/* at least one matrix switch was changed, set backlight activity detect flag */
+			//vpDriverGlobals->misc.BacklightActivity = 1;
+
+			/* iterate over rows */
+			for (j = 0; j < KEYBD_MATRIX_NUMBER_INPUTS; j++)
+			{
+				if (keystate_xor[i] & (1 << j))
+				{
+					code = (j * KEYBD_MATRIX_NUMBER_OUTPUTS) + i;
+					/* figure out if key is pressed or released and process */
+
+					// support alt keymap for function keys
+					if (code == FN_KEY_SCANCODE)
+					{
+						fn_key_active = (keystate_cur[i] & (1 << j)) ? 1 : 0;
+					}
+					else
+					{
+						if (fn_key_active)
+						{
+//							printk("matrix %i, key %i, up/down %i\n", code, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
+							input_report_key(idpkbd_dev, idpkbd_fn_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
+						}
+						else
+						{
+//							printk("matrix %i, key %i, up/down %i\n", code, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
+							input_report_key(idpkbd_dev, idpkbd_keycode[code], (keystate_cur[i] & (1 << j)) ? 1 : 0);
+						}
+					}
+
+				}
+			}
+			input_sync(idpkbd_dev);
+		}
+		keystate_prev[i] = keystate_cur[i];
+	}
+
+	return ret_val;
+}
+
+
+// handles keyboard keypress
+#if POLL_KEYBOARD
+static void idpkbd_scan_keyboard(unsigned long dummy)
+{
+	__u16 cs;		/* column status */
+	int i;
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+#define SCAN_START	0	/* start of scan state machine */
+#define SCAN_GETSTATE	1	/* get keyboard state */
+#define SCAN_STAB	2	/* wait for key to stabalize */
+
+	/* start of keyboard scanning sequence */
+	/* Always start with an all-column scan */
+	setoutput( KEYBD_MATRIX_OUTPUT_MASK );
+	udelay( KEYBD_MATRIX_SETTLING_TIME_US );
+	cs = scaninput();
+
+//	printk("cs = %x\n", cs);
+//	printk("keystate_stable_ctr = %d\n", keystate_stable_ctr);
+//	printk("keystate_pre_active = %d\n", keystate_prev_active);
+//	printk("\n");
+
+	/* 
+	 * if no keys were down in previous state AND we are
+	 * not in stablizing mode AND the all-column scan
+	 * is 0, then keyboard is idle.
+	 */
+
+	if ((! keystate_prev_active) && (keystate_stable_ctr == 0) && (cs == 0))
+		goto scan_done;
+
+	/* Get the current state of the keyboard */
+	if (cs == 0)
+	{
+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+		{
+			keystate_cur[i] = 0;
+		}
+	}
+	else
+	{
+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+		{
+			setoutput ( 1 << i );
+			udelay(KEYBD_MATRIX_SETTLING_TIME_US);
+			keystate_cur[i] = scaninput();
+		}
+	}
+
+	/* Handle the stablizing case first */
+	if (keystate_stable_ctr > 0)
+	{
+
+		/* Compare the current state against the test state */
+		cs = 1;
+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+		{
+			if (keystate_cur[i] != keystate_test[i])
+			{
+				cs = 0;
+				break;
+			}
+		}
+
+		// Are the states the same ?
+		if (cs)
+		{
+			++ keystate_stable_ctr;
+			if (keystate_stable_ctr == KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT)
+			{
+				keystate_prev_active = dokeystatetransition();
+				keystate_stable_ctr = 0;
+			}
+			goto scan_done;
+		}
+		else
+		{
+			keystate_stable_ctr = 0;		// Clear stable counter and fall through to next stage
+		}
+	}
+
+	// Compare the current state against the previous state
+	cs = 1;
+	for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+	{
+		if (keystate_cur[i] != keystate_prev[i])
+		{
+			cs = 0;
+			break;
+		}
+	}
+
+	// If the states are different, begin waiting for stablizing
+	if (! cs)
+	{
+		for (i = 0; i < KEYBD_MATRIX_NUMBER_OUTPUTS; i++)
+		{
+			keystate_test[i] = keystate_cur[i];
+		}
+		keystate_stable_ctr = 1;
+	}
+
+scan_done:
+	// reload timer for next scan
+	mod_timer(&scan_timer, jiffies + scaninterval);
+}
+#else
+static void idpkbd_interrupt(int irq, void *dummy, struct pt_regs *fp)
+{
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+	input_report_key(idpkbd_dev, BTN_0, inb(IDPKBD_PORT) & 1);
+	input_sync(idpkbd_dev);
+}
+#endif
+
+//TODO: Verify Events operation
+// handles keyboard LED and beep events
+int idpkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+	if (type == EV_SND && code == SND_BELL) {
+//x		outb(value, IDPKBD_BELL);
+		return 0;
+	}
+
+	if (type == EV_LED) {
+// TODO:
+		return 0;
+	}
+
+	return -1;
+}
+
+static int idpkbd_open(struct input_dev *dev)
+{
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+	if (idpkbd_used++)
+		return 0;
+
+#if POLL_KEYBOARD
+	// start timer to scan matrix keyboard
+	init_timer(&scan_timer);
+	scan_timer.function = idpkbd_scan_keyboard;
+	mod_timer(&scan_timer, jiffies + scaninterval);
+#else	
+	if (request_irq(IDPKBD_IRQ, idpkbd_interrupt, 0, "idpkbd", NULL)) {
+                printk(KERN_ERR "idpkbd.c: Can't allocate irq %d\n", idpkbd_irq);
+                idpkbd_used--;
+                return -EBUSY;
+        }
+#endif
+
+        return 0;
+}
+
+static void idpkbd_close(struct input_dev *dev)
+{
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+	if (!--idpkbd_used) {
+#if POLL_KEYBOARD
+		// stop timer 
+		del_timer(&scan_timer);
+#else
+		free_irq(IDPKBD_IRQ, idpkbd_interrupt);
+#endif
+	}
+}
+
+static int __init idpkbd_init(void)
+{
+	int i;
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+  idpkbd_dev = input_allocate_device();
+
+	// fill in driver information
+	idpkbd_dev->name = "DevKitIDP PXA255 matrix keyboard";
+	idpkbd_dev->phys = "idpkdb/input0";
+//	idpkbd_dev.id.bustype = BUS_MATRIX;
+	idpkbd_dev->id.vendor = 0x0001;
+	idpkbd_dev->id.product = 0x0001;
+	idpkbd_dev->id.version = 0x0100;
+
+	// fill in function pointers
+	idpkbd_dev->open = idpkbd_open;
+	idpkbd_dev->close = idpkbd_close;
+	idpkbd_dev->event = idpkbd_event;
+
+	// setup available keypresses
+	idpkbd_dev->evbit[0] = BIT(EV_KEY);
+//	idpkbd_dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
+	idpkbd_dev->keycode = idpkbd_keycode;
+	idpkbd_dev->keycodesize = sizeof(unsigned char);
+//	idpkbd_dev.keycodemax = ARRAY_SIZE(idpkbd_keycode);
+	idpkbd_dev->keycodemax = ARRAY_SIZE(idpkbd_keycode) + ARRAY_SIZE(idpkbd_fn_keycode);
+
+	for (i = 0; i < (KEYBD_MATRIX_NUMBER_OUTPUTS * KEYBD_MATRIX_NUMBER_INPUTS); i++)
+	{
+		if (idpkbd_keycode[i])
+			set_bit(idpkbd_keycode[i], idpkbd_dev->keybit);
+		if (idpkbd_fn_keycode[i])
+			set_bit(idpkbd_fn_keycode[i], idpkbd_dev->keybit);
+	}
+
+	input_register_device(idpkbd_dev);
+	
+	printk(KERN_INFO "input: %s\n", idpkbd_dev->name);
+	return 0;
+}
+
+static void __exit idpkbd_exit(void)
+{
+//	printk(KERN_INFO "%s:\n", __FUNCTION__);
+
+	input_unregister_device(idpkbd_dev);
+}
+
+module_init(idpkbd_init);
+module_exit(idpkbd_exit);
+
+
Index: linux-2.6.19/drivers/input/keyboard/Kconfig
===================================================================
--- linux-2.6.19.orig/drivers/input/keyboard/Kconfig
+++ linux-2.6.19/drivers/input/keyboard/Kconfig
@@ -203,4 +203,14 @@ config KEYBOARD_OMAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap-keypad.
 
+config KEYBOARD_IDPKBD
+	tristate "IDP matrix scan keyboard"
+	depends on ARCH_PXA_IDP && INPUT && INPUT_KEYBOARD
+	help
+	  Say Y here if you are running Linux on a DevKitIDP PXA255 and want
+	  to use the attached matrix scan keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called idpkbd.
+
 endif
Index: linux-2.6.19/drivers/input/keyboard/Makefile
===================================================================
--- linux-2.6.19.orig/drivers/input/keyboard/Makefile
+++ linux-2.6.19/drivers/input/keyboard/Makefile
@@ -4,6 +4,7 @@
 
 # Each configuration option enables a list of files.
 
+obj-$(CONFIG_KEYBOARD_IDPKBD)		+= idpkbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_LKKBD)		+= lkkbd.o
Index: linux-2.6.19/drivers/pcmcia/Makefile
===================================================================
--- linux-2.6.19.orig/drivers/pcmcia/Makefile
+++ linux-2.6.19/drivers/pcmcia/Makefile
@@ -68,5 +68,6 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa
 
 pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)		+= pxa2xx_lubbock.o sa1111_generic.o
 pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)		+= pxa2xx_mainstone.o
+pxa2xx_cs-$(CONFIG_ARCH_PXA_IDP)		+= pxa2xx_idp.o
 pxa2xx_cs-$(CONFIG_PXA_SHARPSL)			+= pxa2xx_sharpsl.o
 
Index: linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c
===================================================================
--- /dev/null
+++ linux-2.6.19/drivers/pcmcia/pxa2xx_idp.c
@@ -0,0 +1,392 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_idp.c
+ *
+ * DevKitIDP PXA255 PCMCIA specific routines.
+ * Copyright (C) 2005 BSQUARE
+ * David Plentovich <davidp@bsquare.com>
+ *
+ * Based on pxa2xx_mainstone.c - Nicolas Pitre
+ * Based on (2.4.x) driver/pcmcia/pxa/pxa_idp.c - Jeff Sutherland
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <pcmcia/ss.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/idp.h>
+
+#include "soc_common.h"
+
+#define IDP_S0_CD_IRQ	PCMCIA_S0_CD_VALID
+#define IDP_S1_CD_IRQ	PCMCIA_S1_CD_VALID
+#define IDP_S0_IRQ	PCMCIA_S0_RDYINT
+#define IDP_S1_IRQ	PCMCIA_S1_RDYINT
+
+static struct pcmcia_irqs irqs[] = {
+	{ 0, IDP_S0_CD_IRQ, "PCMCIA0 CD" },
+	{ 1, IDP_S1_CD_IRQ, "PCMCIA1 CD" },
+};
+
+
+static int idp_pcmcia_hw_init_cnt = 0;
+
+
+static int idp_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
+
+	if (!idp_pcmcia_hw_init_cnt++)
+	{
+	  	/* Set PCMCIA Socket 0 power to standby mode.
+		*  PXA IDP has dedicated CPLD pins for all this stuff :-)
+	   	*/
+		IDP_CPLD_PCCARD_EN = PCC0_ENABLE | PCC1_ENABLE;	//both slots disabled, reset NOT active
+		IDP_CPLD_PCCARD_PWR = 0; //all power to both slots off
+	
+		/*
+		 * Setup default state of GPIO outputs
+		 * before we enable them as outputs.
+		 */
+		GPSR(GPIO48_nPOE) =
+			GPIO_bit(GPIO48_nPOE) |
+			GPIO_bit(GPIO49_nPWE) |
+			GPIO_bit(GPIO50_nPIOR) |
+			GPIO_bit(GPIO51_nPIOW) |
+			GPIO_bit(GPIO52_nPCE_1) |
+			GPIO_bit(GPIO53_nPCE_2);
+
+		pxa_gpio_mode(GPIO48_nPOE_MD);
+		pxa_gpio_mode(GPIO49_nPWE_MD);
+		pxa_gpio_mode(GPIO50_nPIOR_MD);
+		pxa_gpio_mode(GPIO51_nPIOW_MD);
+		pxa_gpio_mode(GPIO52_nPCE_1_MD);
+		pxa_gpio_mode(GPIO53_nPCE_2_MD);
+		pxa_gpio_mode(GPIO54_pSKTSEL_MD);
+		pxa_gpio_mode(GPIO55_nPREG_MD);
+		pxa_gpio_mode(GPIO56_nPWAIT_MD);
+		pxa_gpio_mode(GPIO57_nIOIS16_MD);
+
+#if 0	//x	
+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID));
+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID));
+
+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_CD_VALID), GPIO_BOTH_EDGES);
+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_CD_VALID), GPIO_BOTH_EDGES);
+
+		//irq's for slots:
+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT));
+		GPDR(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT)) &= ~GPIO_bit(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT));
+
+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S0_RDYINT), GPIO_FALLING_EDGE);
+		set_GPIO_IRQ_edge(IRQ_TO_GPIO_2_80(PCMCIA_S1_RDYINT), GPIO_FALLING_EDGE);
+#endif	//x
+	}
+
+#if 0	//x
+	return_val = request_irq(PCMCIA_S0_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD0", NULL);
+
+	if (return_val < 0)
+		return -1;
+	
+	return_val += request_irq(PCMCIA_S1_CD_VALID, init->handler, SA_INTERRUPT, "PXA PCMCIA CD1", NULL);
+	
+	if (return_val < 0) {
+		free_irq(PCMCIA_S0_CD_VALID, NULL);
+		return -1;
+	}
+
+	return 2;
+
+#endif	//x
+	skt->irq = (skt->nr == 0) ? IDP_S0_IRQ : IDP_S1_IRQ;
+	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+}
+
+static void idp_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+//x	free_irq(PCMCIA_S0_CD_VALID, NULL);
+//x	free_irq(PCMCIA_S1_CD_VALID, NULL);
+
+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
+
+	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
+
+	if (!--idp_pcmcia_hw_init_cnt)
+	{
+		IDP_CPLD_PCCARD_EN = 0x03;	//disable slots
+		udelay(200);
+		IDP_CPLD_PCCARD_PWR = 0; //shut off all power
+	}
+}
+
+//x static unsigned long idp_pcmcia_status[2];
+
+static void idp_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+				    struct pcmcia_state *state)
+{
+	unsigned long status;
+	volatile unsigned long *stat_regs[2] = { &IDP_CPLD_PCCARD0_STATUS, &IDP_CPLD_PCCARD1_STATUS };
+//	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
+
+//x	status = (skt->nr == 0) ? IDP_PCMCIA0 : IDP_PCMCIA1;
+	status = *stat_regs[skt->nr];
+//x	flip = (status ^ idp_pcmcia_status[skt->nr]) & IDP_PCMCiIA_nSTSCHG_BVD1;
+
+#if 0	//x
+	/*
+	 * Workaround for STSCHG which can't be deasserted:
+	 * We therefore disable/enable corresponding IRQs
+	 * as needed to avoid IRQ locks.
+	 */
+	if (flip) {
+		idp_pcmcia_status[skt->nr] = status;
+		if (status & IDP_PCMCIA_nSTSCHG_BVD1)
+			enable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ
+						   : IDP_S1_STSCHG_IRQ );
+		else
+			disable_irq( (skt->nr == 0) ? IDP_S0_STSCHG_IRQ
+						    : IDP_S1_STSCHG_IRQ );
+	}
+#endif	//x
+
+//x	state->detect = (status & IDP_PCMCIA_nCD) ? 0 : 1;
+	state->detect = (PCC_DETECT(skt->nr)) ? 0 : 1;		// this one is gpio
+	state->ready  = (status & _PCC_IRQ) ? 1 : 0;
+	state->bvd1   = (status & PCC_BVD1) ? 1 : 0;
+	state->bvd2   = (status & PCC_BVD2) ? 1 : 0;
+	state->wrprot = (status & _PCC_WRPROT) ? 1 : 0;
+	state->vs_3v  = (status & PCC_VS1) ? 0 : 1;
+	state->vs_Xv  = (status & PCC_VS2) ? 0 : 1;
+
+#if 0	
+		printk("%s: Sock %u flags: %s%s%s%s%s%s%s\n",__FUNCTION__,skt->nr,
+				(state->detect) ? "DET " : "",
+				(state->ready) ? "RDY " : "",
+				(state->bvd1) ? "BVD1 " : "",
+				(state->bvd2) ? "BVD2 " : "",
+				(state->wrprot) ? "WRPROT " : "",
+				(state->vs_3v) ? "VS_3V " : "",
+				(state->vs_Xv) ? "VS_XV " : "");
+#endif
+}
+
+static int idp_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				       const socket_state_t *state)
+{
+  /* The PXA Idp uses the Maxim MAX1602, with the following connections:
+   *
+   * Socket 0 (PCMCIA):
+   *	MAX1602	PXA_IDP		Register
+   *	Pin	Signal  	IDP_CPLD_PCCARD_PWR:
+   *	-----	-------		----------------------
+   *	A0VPP	PCC0_PWR0	bit0
+   *	A1VPP	PCC0_PWR1	bit1	
+   *	A0VCC	PCC0_PWR2	bit2
+   *	A1VCC	PCC0_PWR3	bit3
+   *	VX	VCC
+   *	VY	+3.3V
+   *	12IN	+12V
+   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+   *
+   * Socket 1 (PCMCIA):
+   *	MAX1602	PXA_IDP		Register
+   *	Pin	Signal		IDP_CPLD_PCCARD_PWR:
+   *	-----	-------		----------------------
+   *	A0VPP	PCC1_PWR0	bit4
+   *	A1VPP	PCC1_PWR1	bit5
+   *	A0VCC	PCC1_PWR2	bit6
+   *	A1VCC	PCC1_PWR3	bit7
+   *	VX	VCC
+   *	VY	+3.3V
+   *	12IN	+12V		
+   *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+   *
+   */
+
+	printk("%s: socket %i %i %i\n", __FUNCTION__, skt->nr, state->Vcc, state->Vpp);	//dcp
+
+	switch (skt->nr) {
+		case 0:
+			switch (state->Vcc) {
+			    case 0:
+					IDP_CPLD_PCCARD_EN |= PCC0_ENABLE; // disable socket
+					udelay(200);
+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
+					break;
+
+			    case 33:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR3;
+					IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE; //turn it on
+					break;
+
+			    case 50:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR2 | PCC0_PWR3);
+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR2;
+					IDP_CPLD_PCCARD_EN &= ~PCC0_ENABLE;
+					break;
+
+			    default:
+			 		printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc);
+					return -1;
+			}
+
+			switch (state->Vpp) {
+			    case 0:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1);
+					break;
+
+			    case 120:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC0_PWR0 | PCC0_PWR1);
+					IDP_CPLD_PCCARD_PWR |= PCC0_PWR1;
+					break;
+
+			    default:
+				  	if(state->Vpp == state->Vcc) {
+						IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC0_PWR0 | PCC0_PWR1)) | PCC0_PWR0;
+					}
+					else {
+						printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp);
+						return -1;
+					}
+			}
+	
+			if (state->flags & SS_RESET) {
+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC0_RESET);
+				printk("RESET\n");
+				}
+			else
+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC0_RESET);
+
+	    	break;
+
+		case 1:
+			switch (state->Vcc) {
+		    	case 0:
+					IDP_CPLD_PCCARD_EN |= PCC1_ENABLE; // disable socket
+					udelay(200);
+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
+					break;
+
+			    case 33:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR3;
+					IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE; //turn it on
+					break;
+
+			    case 50:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR2 | PCC1_PWR3);
+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR2;
+					IDP_CPLD_PCCARD_EN &= ~PCC1_ENABLE;
+					break;
+
+			    default:
+				 	printk(KERN_ERR "%s(): bad Vcc %u\n", __FUNCTION__, state->Vcc);
+					return -1;
+			}
+
+			switch (state->Vpp) {
+			    case 0:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1);
+				break;
+
+			    case 120:
+					IDP_CPLD_PCCARD_PWR &= ~(PCC1_PWR0 | PCC1_PWR1);
+					IDP_CPLD_PCCARD_PWR |= PCC1_PWR1;
+					break;
+
+			    default:
+			  		if(state->Vpp == state->Vcc) {
+						IDP_CPLD_PCCARD_PWR = (IDP_CPLD_PCCARD_PWR & ~(PCC1_PWR0 | PCC1_PWR1)) | PCC1_PWR0;
+					}
+					else {
+				  		printk(KERN_ERR "%s(): bad Vpp %u\n", __FUNCTION__, state->Vpp);
+						return -1;
+					}
+			}
+		
+			if (state->flags & SS_RESET) {
+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN | PCC1_RESET);
+				printk("RESET\n");
+				}
+			else
+				IDP_CPLD_PCCARD_EN = (IDP_CPLD_PCCARD_EN & ~PCC1_RESET);
+
+		    break;
+	}
+	return 0;
+}
+
+static void idp_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
+}
+
+static void idp_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	printk("%s: socket %i\n", __FUNCTION__, skt->nr);	//dcp
+}
+
+static struct pcmcia_low_level idp_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= idp_pcmcia_hw_init,
+	.hw_shutdown		= idp_pcmcia_hw_shutdown,
+	.socket_state		= idp_pcmcia_socket_state,
+	.configure_socket	= idp_pcmcia_configure_socket,
+	.socket_init		= idp_pcmcia_socket_init,
+	.socket_suspend		= idp_pcmcia_socket_suspend,
+	.nr			= 2,
+};
+
+static struct platform_device *idp_pcmcia_device;
+
+static int __init idp_pcmcia_init(void)
+{
+	int ret;
+	printk("%s\n", __FUNCTION__);	//dcp
+
+	idp_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!idp_pcmcia_device)
+		return -ENOMEM;
+	memset(idp_pcmcia_device, 0, sizeof(*idp_pcmcia_device));
+	idp_pcmcia_device->name = "pxa2xx-pcmcia";
+	idp_pcmcia_device->dev.platform_data = &idp_pcmcia_ops;
+
+	ret = platform_device_register(idp_pcmcia_device);
+	if (ret)
+		kfree(idp_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit idp_pcmcia_exit(void)
+{
+	printk("%s\n", __FUNCTION__);	//dcp
+	/*
+	 * This call is supposed to free our idp_pcmcia_device.
+	 * Unfortunately platform_device don't have a free method, and
+	 * we can't assume it's free of any reference at this point so we
+	 * can't free it either.
+	 */
+	platform_device_unregister(idp_pcmcia_device);
+}
+
+module_init(idp_pcmcia_init);
+module_exit(idp_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
Index: linux-2.6.19/include/asm-arm/arch-pxa/idp.h
===================================================================
--- linux-2.6.19.orig/include/asm-arm/arch-pxa/idp.h
+++ linux-2.6.19/include/asm-arm/arch-pxa/idp.h
@@ -179,15 +179,15 @@
 #define KEYBD_MATRIX_NUMBER_INPUTS	7
 #define KEYBD_MATRIX_NUMBER_OUTPUTS	14
 
-#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
-#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+#undef KEYBD_MATRIX_INVERT_OUTPUT_LOGIC
+#undef KEYBD_MATRIX_INVERT_INPUT_LOGIC
 
-#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_SETTLING_TIME_US			40
 #define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
 
 #define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
 {\
-	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_LOW = outputs & 0x7f;\
 	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
 }