path: root/packages/libsdl/libsdl-image-1.2.3/autotools.patch

Index: SDL_image-1.2.3/acinclude.m4
===================================================================
--- SDL_image-1.2.3.orig/acinclude.m4	2001-11-02 21:39:10.000000000 +0100
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,608 +0,0 @@
-# Configure paths for SDL
-# Sam Lantinga 9/21/99
-# stolen from Manish Singh
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
-dnl
-AC_DEFUN(AM_PATH_SDL,
-[dnl 
-dnl Get the cflags and libraries from the sdl-config script
-dnl
-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
-            sdl_prefix="$withval", sdl_prefix="")
-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
-		    , enable_sdltest=yes)
-
-  if test x$sdl_exec_prefix != x ; then
-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
-     fi
-  fi
-  if test x$sdl_prefix != x ; then
-     sdl_args="$sdl_args --prefix=$sdl_prefix"
-     if test x${SDL_CONFIG+set} != xset ; then
-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
-     fi
-  fi
-
-  AC_REQUIRE([AC_CANONICAL_TARGET])
-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
-  no_sdl=""
-  if test "$SDL_CONFIG" = "no" ; then
-    no_sdl=yes
-  else
-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
-
-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
-    if test "x$enable_sdltest" = "xyes" ; then
-      ac_save_CFLAGS="$CFLAGS"
-      ac_save_LIBS="$LIBS"
-      CFLAGS="$CFLAGS $SDL_CFLAGS"
-      LIBS="$LIBS $SDL_LIBS"
-dnl
-dnl Now check if the installed SDL is sufficiently new. (Also sanity
-dnl checks the results of sdl-config to some extent
-dnl
-      rm -f conf.sdltest
-      AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "SDL.h"
-
-char*
-my_strdup (char *str)
-{
-  char *new_str;
-  
-  if (str)
-    {
-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
-      strcpy (new_str, str);
-    }
-  else
-    new_str = NULL;
-  
-  return new_str;
-}
-
-int main (int argc, char *argv[])
-{
-  int major, minor, micro;
-  char *tmp_version;
-
-  /* This hangs on some systems (?)
-  system ("touch conf.sdltest");
-  */
-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
-
-  /* HP/UX 9 (%@#!) writes to sscanf strings */
-  tmp_version = my_strdup("$min_sdl_version");
-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
-     printf("%s, bad version string\n", "$min_sdl_version");
-     exit(1);
-   }
-
-   if (($sdl_major_version > major) ||
-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
-    {
-      return 0;
-    }
-  else
-    {
-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
-      printf("*** best to upgrade to the required version.\n");
-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
-      printf("*** config.cache before re-running configure\n");
-      return 1;
-    }
-}
-
-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
-       CFLAGS="$ac_save_CFLAGS"
-       LIBS="$ac_save_LIBS"
-     fi
-  fi
-  if test "x$no_sdl" = x ; then
-     AC_MSG_RESULT(yes)
-     ifelse([$2], , :, [$2])     
-  else
-     AC_MSG_RESULT(no)
-     if test "$SDL_CONFIG" = "no" ; then
-       echo "*** The sdl-config script installed by SDL could not be found"
-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
-       echo "*** full path to sdl-config."
-     else
-       if test -f conf.sdltest ; then
-        :
-       else
-          echo "*** Could not run SDL test program, checking why..."
-          CFLAGS="$CFLAGS $SDL_CFLAGS"
-          LIBS="$LIBS $SDL_LIBS"
-          AC_TRY_LINK([
-#include <stdio.h>
-#include "SDL.h"
-
-int main(int argc, char *argv[])
-{ return 0; }
-#undef  main
-#define main K_and_R_C_main
-],      [ return 0; ],
-        [ echo "*** The test program compiled, but did not run. This usually means"
-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
-          echo "*** is required on your system"
-	  echo "***"
-          echo "*** If you have an old version installed, it is best to remove it, although"
-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
-          CFLAGS="$ac_save_CFLAGS"
-          LIBS="$ac_save_LIBS"
-       fi
-     fi
-     SDL_CFLAGS=""
-     SDL_LIBS=""
-     ifelse([$3], , :, [$3])
-  fi
-  AC_SUBST(SDL_CFLAGS)
-  AC_SUBST(SDL_LIBS)
-  rm -f conf.sdltest
-])
-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
-## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful, but
-## WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-##
-## As a special exception to the GNU General Public License, if you
-## distribute this file as part of a program that contains a
-## configuration script generated by Autoconf, you may include it under
-## the same distribution terms that you use for the rest of that program.
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-case "$target" in
-NONE) lt_target="$host" ;;
-*) lt_target="$target" ;;
-esac
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$lt_target" in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$lt_target" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments.  Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!).  If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
Index: SDL_image-1.2.3/m4/sdl.m4
===================================================================
--- /dev/null	1970-01-01 00:00:00.000000000 +0000
+++ SDL_image-1.2.3/m4/sdl.m4	2008-07-24 01:32:20.220875043 +0200
@@ -0,0 +1,174 @@
+# Configure paths for SDL
+# Sam Lantinga 9/21/99
+# stolen from Manish Singh
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+dnl
+AC_DEFUN(AM_PATH_SDL,
+[dnl 
+dnl Get the cflags and libraries from the sdl-config script
+dnl
+AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
+            sdl_prefix="$withval", sdl_prefix="")
+AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+            sdl_exec_prefix="$withval", sdl_exec_prefix="")
+AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
+		    , enable_sdltest=yes)
+
+  if test x$sdl_exec_prefix != x ; then
+     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+     if test x${SDL_CONFIG+set} != xset ; then
+        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+     fi
+  fi
+  if test x$sdl_prefix != x ; then
+     sdl_args="$sdl_args --prefix=$sdl_prefix"
+     if test x${SDL_CONFIG+set} != xset ; then
+        SDL_CONFIG=$sdl_prefix/bin/sdl-config
+     fi
+  fi
+
+  AC_REQUIRE([AC_CANONICAL_TARGET])
+  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
+  min_sdl_version=ifelse([$1], ,0.11.0,$1)
+  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+  no_sdl=""
+  if test "$SDL_CONFIG" = "no" ; then
+    no_sdl=yes
+  else
+    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+
+    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_sdltest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $SDL_CFLAGS"
+      LIBS="$LIBS $SDL_LIBS"
+dnl
+dnl Now check if the installed SDL is sufficiently new. (Also sanity
+dnl checks the results of sdl-config to some extent
+dnl
+      rm -f conf.sdltest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "SDL.h"
+
+char*
+my_strdup (char *str)
+{
+  char *new_str;
+  
+  if (str)
+    {
+      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+      strcpy (new_str, str);
+    }
+  else
+    new_str = NULL;
+  
+  return new_str;
+}
+
+int main (int argc, char *argv[])
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  /* This hangs on some systems (?)
+  system ("touch conf.sdltest");
+  */
+  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = my_strdup("$min_sdl_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_sdl_version");
+     exit(1);
+   }
+
+   if (($sdl_major_version > major) ||
+      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_sdl" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$SDL_CONFIG" = "no" ; then
+       echo "*** The sdl-config script installed by SDL could not be found"
+       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the SDL_CONFIG environment variable to the"
+       echo "*** full path to sdl-config."
+     else
+       if test -f conf.sdltest ; then
+        :
+       else
+          echo "*** Could not run SDL test program, checking why..."
+          CFLAGS="$CFLAGS $SDL_CFLAGS"
+          LIBS="$LIBS $SDL_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include "SDL.h"
+
+int main(int argc, char *argv[])
+{ return 0; }
+#undef  main
+#define main K_and_R_C_main
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding SDL or finding the wrong"
+          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     SDL_CFLAGS=""
+     SDL_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(SDL_CFLAGS)
+  AC_SUBST(SDL_LIBS)
+  rm -f conf.sdltest
+])
Index: SDL_image-1.2.3/configure.in
===================================================================
--- SDL_image-1.2.3.orig/configure.in	2008-07-24 01:34:07.807534207 +0200
+++ SDL_image-1.2.3/configure.in	2008-07-24 01:34:16.960864590 +0200
@@ -44,6 +44,8 @@
 AM_INIT_AUTOMAKE(SDL_image, $VERSION)
 AM_MAINTAINER_MODE
 
+AC_CONFIG_MACRO_DIR([m4])
+
 dnl Check for tools
 
 AC_LIBTOOL_WIN32_DLL