blob: 5409e720e8c9ecd68d584b24bb3fedab0cb7d96e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
|
#@TYPE: Machine
#@NAME: Freescale i.MX51 Babbage
#@DESCRIPTION: Machine configuration for the Babbage board
#@URL: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX515
TARGET_ARCH = "arm"
PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
XSERVER = "xserver-xorg \
xf86-input-evdev \
xf86-input-mouse \
xf86-input-keyboard"
# Only has DVI connector for external screen
GUI_MACHINE_CLASS = "bigscreen"
require conf/machine/include/imx51.inc
PREFERRED_PROVIDER_virtual/kernel = "linux"
PREFFERED_PROVIDER_virtual/bootloader = "u-boot"
UBOOT_MACHINE = "mx51_bbg_config"
IMAGE_FSTYPES += "tar.bz2 ubi"
EXTRA_IMAGECMD_jffs2 = "-lnp "
SERIAL_CONSOLE = "115200 ttymxc0"
MACHINE_FEATURES = "kernel26 screen apm usbhost vfat alsa"
# The board expects the bootloader to be at offset 0x400 of SD-CARd in the bottom slot.
# The generated u-boot.bin is zero-padded from offset 0x000 to offset 0x400.
#
# You may flash it using a command like :
# # dd if=/u-boot.bin of=/dev/sdX
#
# Alternatively, if you want to keep your partition table intact, you can use
# something like :
# # dd if=/u-boot.bin of=/dev/sdX bs=512 seek=2 skip=2
#
# Note that both of these commands will destroy any filesystem present on the
# sectors u-boot will be written. Please Consider creating your partition
# table accordingly.
|
