diff options
Diffstat (limited to 'recipes')
| -rw-r--r-- | recipes/linux/linux-2.6.30/at91sam9263ek/defconfig | 1855 | ||||
| -rw-r--r-- | recipes/linux/linux-2.6.30/at91sam9263ek/hrw-linux-2.6.30-exp.patch | 1816 | ||||
| -rw-r--r-- | recipes/linux/linux_2.6.30.bb | 5 |
3 files changed, 3676 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.30/at91sam9263ek/defconfig b/recipes/linux/linux-2.6.30/at91sam9263ek/defconfig new file mode 100644 index 0000000000..a42673b7af --- /dev/null +++ b/recipes/linux/linux-2.6.30/at91sam9263ek/defconfig @@ -0,0 +1,1855 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30 +# Tue Jul 14 22:02:26 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARCH_AT91=y +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# Atmel AT91 System-on-Chip +# +# CONFIG_ARCH_AT91RM9200 is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +CONFIG_ARCH_AT91SAM9263=y +# CONFIG_ARCH_AT91SAM9RL is not set +# CONFIG_ARCH_AT91SAM9G20 is not set +# CONFIG_ARCH_AT91CAP9 is not set +# CONFIG_ARCH_AT572D940HF is not set +# CONFIG_ARCH_AT91X40 is not set +CONFIG_AT91_PMC_UNIT=y +# CONFIG_MACH_NEOCORE926 is not set + +# +# AT91SAM9263 Board Type +# +CONFIG_MACH_AT91SAM9263EK=y +# CONFIG_MACH_USB_A9263 is not set +# CONFIG_MACH_CSB737 is not set +# CONFIG_MACH_TOTEMNOVA is not set + +# +# AT91 Board Options +# +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set + +# +# AT91 Feature Selections +# +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_AT91_SLOW_CLOCK is not set +CONFIG_AT91_TIMER_HZ=100 +CONFIG_AT91_EARLY_DBGU=y +# CONFIG_AT91_EARLY_USART0 is not set +# CONFIG_AT91_EARLY_USART1 is not set +# CONFIG_AT91_EARLY_USART2 is not set +# CONFIG_AT91_EARLY_USART3 is not set +# CONFIG_AT91_EARLY_USART4 is not set +# CONFIG_AT91_EARLY_USART5 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=m +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTSDIO=m +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=y + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=m +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_ICS932S401 is not set +CONFIG_ATMEL_SSC=y +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_MACB=y +CONFIG_MACB_TX_SRAM=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_ATMEL=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_AT91SAM9X_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D15605 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_ATMEL=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_BACKLIGHT_ATMEL_PWM=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +CONFIG_SND_ARM=y +CONFIG_SND_AT91_AC97=y + +# +# Atmel devices (AVR32 and AT91) +# +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_SND_ATMEL_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_AT91=y +CONFIG_USB_AT91=m +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AT91=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +CONFIG_LEDS_ATMEL_PWM=y +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_RTC_DRV_AT91SAM9_RTT=0 +CONFIG_RTC_DRV_AT91SAM9_GPBR=0 +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +# CONFIG_EXT4_FS_XATTR is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +CONFIG_NLS_CODEPAGE_865=y +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/recipes/linux/linux-2.6.30/at91sam9263ek/hrw-linux-2.6.30-exp.patch b/recipes/linux/linux-2.6.30/at91sam9263ek/hrw-linux-2.6.30-exp.patch new file mode 100644 index 0000000000..0e377b0512 --- /dev/null +++ b/recipes/linux/linux-2.6.30/at91sam9263ek/hrw-linux-2.6.30-exp.patch @@ -0,0 +1,1816 @@ +This is hacked version of linux-2.6.28-exp.patch from Atmel. I removed most of +things not related to at91sam9263ek so it is not safe to use it on other +boards (probably not so save also on this one). + +This adds sound support, touchscreen pressure and ability to use SRAM for +Ethernet buffers. + +OE-Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl> + +--- + arch/arm/mach-at91/include/mach/at91_pmc.h | 27 + drivers/input/touchscreen/atmel_tsadcc.c | 16 + drivers/mmc/host/at91_mci.c | 39 - + drivers/net/Kconfig | 6 + drivers/net/macb.c | 72 ++ + drivers/net/macb.h | 9 + sound/arm/Kconfig | 9 + sound/arm/Makefile | 4 + sound/arm/at91-ac97.c | 911 +++++++++++++++++++++++++++++ + sound/arm/at91-ac97.h | 295 +++++++++ + 11 files changed, 1485 insertions(+), 62 deletions(-) + +--- linux-2.6.30.orig/arch/arm/mach-at91/include/mach/at91_pmc.h ++++ linux-2.6.30/arch/arm/mach-at91/include/mach/at91_pmc.h +@@ -21,11 +21,11 @@ + + #define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ + #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ + #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ + #define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */ ++#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock Enable [some SAM9 only] */ + #define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ + #define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ + #define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ + #define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ + #define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +@@ -38,15 +38,15 @@ + + #define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ + #define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ + #define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ ++#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */ + #define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ + #define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ + #define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */ ++#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ + + #define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ + #define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ + #define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x, CAP9] */ + #define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +@@ -71,10 +71,11 @@ + #define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ + #define AT91_PMC_CSS_SLOW (0 << 0) + #define AT91_PMC_CSS_MAIN (1 << 0) + #define AT91_PMC_CSS_PLLA (2 << 0) + #define AT91_PMC_CSS_PLLB (3 << 0) ++#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ + #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ + #define AT91_PMC_PRES_1 (0 << 2) + #define AT91_PMC_PRES_2 (1 << 2) + #define AT91_PMC_PRES_4 (2 << 2) + #define AT91_PMC_PRES_8 (3 << 2) +@@ -87,25 +88,39 @@ + #define AT91RM9200_PMC_MDIV_3 (2 << 8) + #define AT91RM9200_PMC_MDIV_4 (3 << 8) + #define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ + #define AT91SAM9_PMC_MDIV_2 (1 << 8) + #define AT91SAM9_PMC_MDIV_4 (2 << 8) +-#define AT91SAM9_PMC_MDIV_6 (3 << 8) ++#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ ++#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ + #define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ + #define AT91_PMC_PDIV_1 (0 << 12) + #define AT91_PMC_PDIV_2 (1 << 12) + +-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-4 Registers */ ++#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ ++#define AT91_PMC_PLLADIV2_OFF (0 << 12) ++#define AT91_PMC_PLLADIV2_ON (1 << 12) ++ ++#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */ ++#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ ++#define AT91_PMC_USBS_PLLA (0 << 0) ++#define AT91_PMC_USBS_UPLL (1 << 0) ++#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ ++ ++#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ ++#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ ++#define AT91_PMC_CSSMCK_CSS (0 << 8) ++#define AT91_PMC_CSSMCK_MCK (1 << 8) + + #define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ + #define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ + #define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ + #define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ + #define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ + #define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ + #define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */ ++#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */ + #define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */ + #define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ + #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ + #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ + #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +--- linux-2.6.30.orig/drivers/input/touchscreen/atmel_tsadcc.c ++++ linux-2.6.30/drivers/input/touchscreen/atmel_tsadcc.c +@@ -34,10 +34,11 @@ + #define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */ + #define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */ + #define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */ + #define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */ + #define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */ ++#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */ + #define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */ + #define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */ + #define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */ + #define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */ + +@@ -82,20 +83,25 @@ + #define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */ + #define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */ + #define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */ + #define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */ + ++#define ATMEL_TSADCC_XPOS 0x50 ++#define ATMEL_TSADCC_Z1DAT 0x54 ++#define ATMEL_TSADCC_Z2DAT 0x58 ++ ++ + #define ADC_CLOCK 1000000 + + struct atmel_tsadcc { + struct input_dev *input; + char phys[32]; + struct clk *clk; + int irq; + unsigned int prev_absx; + unsigned int prev_absy; +- unsigned char bufferedmeasure; ++ unsigned char bufferedmeasure; + }; + + static void __iomem *tsc_base; + + #define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg)) +@@ -122,10 +128,13 @@ static irqreturn_t atmel_tsadcc_interrup + ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT); + atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT); + + input_report_key(input_dev, BTN_TOUCH, 0); + ts_dev->bufferedmeasure = 0; ++#ifdef CONFIG_TS_ABS_PRESSURE ++ input_report_abs(input_dev, ABS_PRESSURE, 0); ++#endif + input_sync(input_dev); + + } else if (status & ATMEL_TSADCC_PENCNT) { + /* Pen detected */ + reg = atmel_tsadcc_read(ATMEL_TSADCC_MR); +@@ -146,10 +155,13 @@ static irqreturn_t atmel_tsadcc_interrup + * be erroneous. + * Always report previous measurement */ + input_report_abs(input_dev, ABS_X, ts_dev->prev_absx); + input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy); + input_report_key(input_dev, BTN_TOUCH, 1); ++#ifdef CONFIG_TS_ABS_PRESSURE ++ input_report_abs(input_dev, ABS_PRESSURE, 7500); ++#endif + input_sync(input_dev); + } else + ts_dev->bufferedmeasure = 1; + + /* Now make new measurement */ +@@ -245,10 +257,11 @@ static int __devinit atmel_tsadcc_probe( + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0); ++ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15000, 0, 0); + + /* clk_enable() always returns 0, no need to check it */ + clk_enable(ts_dev->clk); + + prsc = clk_get_rate(ts_dev->clk); +@@ -297,10 +310,11 @@ err_free_mem: + static int __devexit atmel_tsadcc_remove(struct platform_device *pdev) + { + struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev); + struct resource *res; + ++ disable_irq(ts_dev->irq); + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +--- linux-2.6.30.orig/drivers/mmc/host/at91_mci.c ++++ linux-2.6.30/drivers/mmc/host/at91_mci.c +@@ -77,10 +77,20 @@ + #include <mach/cpu.h> + #include <mach/at91_mci.h> + + #define DRIVER_NAME "at91_mci" + ++static inline int at91mci_is_rev2(void) ++{ ++ return ( cpu_is_at91sam9260() ++ || cpu_is_at91sam9263() ++ || cpu_is_at91cap9() ++ || cpu_is_at91sam9rl() ++ || cpu_is_at91sam9g20() ++ ); ++} ++ + #define FL_SENT_COMMAND (1 << 0) + #define FL_SENT_STOP (1 << 1) + + #define AT91_MCI_ERRORS (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE \ + | AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE \ +@@ -199,12 +209,12 @@ static inline void at91_mci_sg_to_dma(st + unsigned *dmabuf = host->buffer; + + size = data->blksz * data->blocks; + len = data->sg_len; + +- /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) ++ /* at91mci rev2 Data Write Operation and number of bytes erratum */ ++ if (at91mci_is_rev2()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + + /* + * Just loop through all entries. Size might not +@@ -460,11 +470,11 @@ static void at91_mci_enable(struct at91m + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC); + mr = AT91_MCI_PDCMODE | 0x34a; + +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) ++ if (at91mci_is_rev2()) + mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF; + + at91_mci_write(host, AT91_MCI_MR, mr); + + /* use Slot A or B (only one at same time) */ +@@ -613,14 +623,14 @@ static void at91_mci_send_command(struct + /* + * Handle a write + */ + host->total_length = block_length * blocks; + /* +- * AT91SAM926[0/3] Data Write Operation and ++ * at91mci rev2 Data Write Operation and + * number of bytes erratum + */ +- if (cpu_is_at91sam9260 () || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) ++ if (at91mci_is_rev2()) + if (host->total_length < 12) + host->total_length = 12; + + host->buffer = kmalloc(host->total_length, GFP_KERNEL); + if (!host->buffer) { +@@ -676,15 +686,14 @@ static void at91_mci_process_next(struct + else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { + host->flags |= FL_SENT_STOP; + at91_mci_send_command(host, host->request->stop); + } else { + del_timer(&host->timer); +- /* the at91rm9200 mci controller hangs after some transfers, ++ /* the mci controller hangs after some transfers, + * and the workaround is to reset it after each transfer. + */ +- if (cpu_is_at91rm9200()) +- at91_reset_host(host); ++ at91_reset_host(host); + mmc_request_done(host->mmc, host->request); + } + } + + /* +@@ -1005,28 +1014,35 @@ static int __init at91_mci_probe(struct + + mmc->ops = &at91_mci_ops; + mmc->f_min = 375000; + mmc->f_max = 25000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; +- mmc->caps = MMC_CAP_SDIO_IRQ; ++ mmc->caps = 0; + + mmc->max_blk_size = 4095; + mmc->max_blk_count = mmc->max_req_size; + + host = mmc_priv(mmc); + host->mmc = mmc; + host->buffer = NULL; + host->bus_mode = 0; + host->board = pdev->dev.platform_data; + if (host->board->wire4) { +- if (cpu_is_at91sam9260() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) ++ if (at91mci_is_rev2()) + mmc->caps |= MMC_CAP_4_BIT_DATA; + else + dev_warn(&pdev->dev, "4 wire bus mode not supported" + " - using 1 wire\n"); + } + ++ /* Add SDIO capability when available */ ++ if (at91mci_is_rev2()) { ++ /* at91mci rev2 sdio interrupt erratum */ ++ if (host->board->wire4 || !host->board->slot_b) ++ mmc->caps |= MMC_CAP_SDIO_IRQ; ++ } ++ + /* + * Reserve GPIOs ... board init code makes sure these pins are set + * up as GPIOs with the right direction (input, except for vcc) + */ + if (host->board->det_pin) { +@@ -1079,12 +1095,11 @@ static int __init at91_mci_probe(struct + + /* + * Allocate the MCI interrupt + */ + host->irq = platform_get_irq(pdev, 0); +- ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, +- mmc_hostname(mmc), host); ++ ret = request_irq(host->irq, at91_mci_irq, 0, mmc_hostname(mmc), host); + if (ret) { + dev_dbg(&pdev->dev, "request MCI interrupt failed\n"); + goto fail0; + } + +--- linux-2.6.30.orig/drivers/net/Kconfig ++++ linux-2.6.30/drivers/net/Kconfig +@@ -226,10 +226,16 @@ config MACB + parts. Say Y to include support for the MACB chip. + + To compile this driver as a module, choose M here: the module + will be called macb. + ++config MACB_TX_SRAM ++ bool "Atmel MACB TX buffers in internal SRAM" ++ depends on NET_ETHERNET && MACB && (ARCH_AT91SAM9260 || ARCH_AT91SAM9263) ++ help ++ Use internal SRAM for TX buffers. ++ + source "drivers/net/arm/Kconfig" + + config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on ARM || MIPS || SUPERH +--- linux-2.6.30.orig/drivers/net/macb.c ++++ linux-2.6.30/drivers/net/macb.c +@@ -31,13 +31,25 @@ + #define RX_RING_BYTES (sizeof(struct dma_desc) * RX_RING_SIZE) + + /* Make the IP header word-aligned (the ethernet header is 14 bytes) */ + #define RX_OFFSET 2 + +-#define TX_RING_SIZE 128 ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++ #if defined(CONFIG_ARCH_AT91SAM9260) ++ #define TX_RING_SIZE 2 ++ #elif defined(CONFIG_ARCH_AT91SAM9263) ++ #define TX_RING_SIZE 32 ++ #endif ++ #define TX_BUFFER_SIZE 1536 ++ #define TX_RING_BYTES (sizeof(struct dma_desc) * TX_RING_SIZE) ++ #define TX_DMA_SIZE ((TX_RING_BYTES) + (TX_RING_SIZE) * (TX_BUFFER_SIZE)) ++#else ++ #define TX_RING_SIZE 128 ++ #define TX_RING_BYTES (sizeof(struct dma_desc) * TX_RING_SIZE) ++#endif ++ + #define DEF_TX_RING_PENDING (TX_RING_SIZE - 1) +-#define TX_RING_BYTES (sizeof(struct dma_desc) * TX_RING_SIZE) + + #define TX_RING_GAP(bp) \ + (TX_RING_SIZE - (bp)->tx_pending) + #define TX_BUFFS_AVAIL(bp) \ + (((bp)->tx_tail <= (bp)->tx_head) ? \ +@@ -376,12 +388,14 @@ static void macb_tx(struct macb *bp) + if (!(bufstat & MACB_BIT(TX_USED))) + break; + + dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n", + tail, skb->data); ++#if !defined(CONFIG_MACB_TX_SRAM) + dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len, + DMA_TO_DEVICE); ++#endif + bp->stats.tx_packets++; + bp->stats.tx_bytes += skb->len; + rp->skb = NULL; + dev_kfree_skb_irq(skb); + } +@@ -633,23 +647,30 @@ static int macb_start_xmit(struct sk_buf + return 1; + } + + entry = bp->tx_head; + dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry); ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++ mapping = bp->tx_ring[entry].addr; ++ memcpy(bp->tx_buffers + entry * TX_BUFFER_SIZE, skb->data, len); ++#else + mapping = dma_map_single(&bp->pdev->dev, skb->data, + len, DMA_TO_DEVICE); ++#endif + bp->tx_skb[entry].skb = skb; + bp->tx_skb[entry].mapping = mapping; + dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n", + skb->data, (unsigned long)mapping); + + ctrl = MACB_BF(TX_FRMLEN, len); + ctrl |= MACB_BIT(TX_LAST); + if (entry == (TX_RING_SIZE - 1)) + ctrl |= MACB_BIT(TX_WRAP); + ++#if !defined(CONFIG_MACB_TX_SRAM) + bp->tx_ring[entry].addr = mapping; ++#endif + bp->tx_ring[entry].ctrl = ctrl; + wmb(); + + entry = NEXT_TX(entry); + bp->tx_head = entry; +@@ -676,20 +697,29 @@ static void macb_free_consistent(struct + dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES, + bp->rx_ring, bp->rx_ring_dma); + bp->rx_ring = NULL; + } + if (bp->tx_ring) { ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++ iounmap((void *)bp->tx_ring); ++#else + dma_free_coherent(&bp->pdev->dev, TX_RING_BYTES, + bp->tx_ring, bp->tx_ring_dma); ++#endif + bp->tx_ring = NULL; + } + if (bp->rx_buffers) { + dma_free_coherent(&bp->pdev->dev, + RX_RING_SIZE * RX_BUFFER_SIZE, + bp->rx_buffers, bp->rx_buffers_dma); + bp->rx_buffers = NULL; + } ++ ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++ if (bp->tx_ring_dma) ++ release_mem_region(bp->tx_ring_dma, TX_DMA_SIZE); ++#endif + } + + static int macb_alloc_consistent(struct macb *bp) + { + int size; +@@ -706,18 +736,48 @@ static int macb_alloc_consistent(struct + goto out_err; + dev_dbg(&bp->pdev->dev, + "Allocated RX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->rx_ring_dma, bp->rx_ring); + ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++#if defined(CONFIG_ARCH_AT91SAM9260) ++ if (request_mem_region(AT91SAM9260_SRAM0_BASE, TX_DMA_SIZE, "macb")) { ++ bp->tx_ring_dma = AT91SAM9260_SRAM0_BASE; ++ } else { ++ if (request_mem_region(AT91SAM9260_SRAM1_BASE, TX_DMA_SIZE, "macb")) { ++ bp->tx_ring_dma = AT91SAM9260_SRAM1_BASE; ++ } else { ++ printk(KERN_WARNING "Cannot request SRAM memory for TX ring, already used\n"); ++ return -EBUSY; ++ } ++ } ++#elif defined(CONFIG_ARCH_AT91SAM9263) ++ if (request_mem_region(AT91SAM9263_SRAM0_BASE, TX_DMA_SIZE, "macb")) { ++ bp->tx_ring_dma = AT91SAM9263_SRAM0_BASE; ++ } else { ++ printk(KERN_WARNING "Cannot request SRAM memory for TX ring, already used\n"); ++ return -EBUSY; ++ } ++#endif ++ ++ bp->tx_ring = ioremap(bp->tx_ring_dma, TX_DMA_SIZE); ++ if (!bp->tx_ring) ++ return -ENOMEM; ++ ++ bp->tx_buffers_dma = bp->tx_ring_dma + TX_RING_BYTES; ++ bp->tx_buffers = (char *) bp->tx_ring + TX_RING_BYTES; ++#else + size = TX_RING_BYTES; + bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size, + &bp->tx_ring_dma, GFP_KERNEL); + if (!bp->tx_ring) + goto out_err; ++ + dev_dbg(&bp->pdev->dev, + "Allocated TX ring of %d bytes at %08lx (mapped %p)\n", + size, (unsigned long)bp->tx_ring_dma, bp->tx_ring); ++#endif + + size = RX_RING_SIZE * RX_BUFFER_SIZE; + bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size, + &bp->rx_buffers_dma, GFP_KERNEL); + if (!bp->rx_buffers) +@@ -744,14 +804,22 @@ static void macb_init_rings(struct macb + bp->rx_ring[i].ctrl = 0; + addr += RX_BUFFER_SIZE; + } + bp->rx_ring[RX_RING_SIZE - 1].addr |= MACB_BIT(RX_WRAP); + ++#if defined(CONFIG_ARCH_AT91) && defined(CONFIG_MACB_TX_SRAM) ++ for (i = 0; i < TX_RING_SIZE; i++) { ++ bp->tx_ring[i].addr = bp->tx_buffers_dma + i * TX_BUFFER_SIZE; ++ bp->tx_ring[i].ctrl = MACB_BIT(TX_USED); ++ } ++#else + for (i = 0; i < TX_RING_SIZE; i++) { + bp->tx_ring[i].addr = 0; + bp->tx_ring[i].ctrl = MACB_BIT(TX_USED); + } ++#endif ++ + bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP); + + bp->rx_tail = bp->tx_head = bp->tx_tail = 0; + } + +--- linux-2.6.30.orig/drivers/net/macb.h ++++ linux-2.6.30/drivers/net/macb.h +@@ -367,12 +367,17 @@ struct macb { + + unsigned int tx_head, tx_tail; + struct dma_desc *tx_ring; + struct ring_info *tx_skb; + ++#if defined(CONFIG_ARCH_AT91) ++ void *tx_buffers; ++#endif ++ + spinlock_t lock; + struct platform_device *pdev; ++ struct clk *macb_clk; + struct clk *pclk; + struct clk *hclk; + struct net_device *dev; + struct napi_struct napi; + struct net_device_stats stats; +@@ -380,10 +385,14 @@ struct macb { + + dma_addr_t rx_ring_dma; + dma_addr_t tx_ring_dma; + dma_addr_t rx_buffers_dma; + ++#if defined(CONFIG_ARCH_AT91) ++ dma_addr_t tx_buffers_dma; ++#endif ++ + unsigned int rx_pending, tx_pending; + + struct mii_bus *mii_bus; + struct phy_device *phy_dev; + unsigned int link; +--- linux-2.6.30.orig/sound/arm/Kconfig ++++ linux-2.6.30/sound/arm/Kconfig +@@ -37,7 +37,16 @@ config SND_PXA2XX_AC97 + select SND_PXA2XX_LIB_AC97 + help + Say Y or M if you want to support any AC97 codec attached to + the PXA2xx AC97 interface. + ++config SND_AT91_AC97 ++ tristate "AC97 Controller driver for SAM926X familly from ATMEL" ++ depends on SND && ARCH_AT91 ++ select SND_PCM ++ select SND_AC97_CODEC ++ help ++ Say Y or M if you want to support any AC97 codec attached to ++ the SAM926X AC97 Controller. ++ + endif # SND_ARM + +--- linux-2.6.30.orig/sound/arm/Makefile ++++ linux-2.6.30/sound/arm/Makefile +@@ -12,5 +12,9 @@ obj-$(CONFIG_SND_PXA2XX_LIB) += snd-pxa2 + snd-pxa2xx-lib-y := pxa2xx-pcm-lib.o + snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_AC97) += pxa2xx-ac97-lib.o + + obj-$(CONFIG_SND_PXA2XX_AC97) += snd-pxa2xx-ac97.o + snd-pxa2xx-ac97-objs := pxa2xx-ac97.o ++ ++obj-$(CONFIG_SND_AT91_AC97) += snd-at91-ac97.o ++snd-at91-ac97-objs := at91-ac97.o ++ +--- /dev/null ++++ linux-2.6.30/sound/arm/at91-ac97.c +@@ -0,0 +1,911 @@ ++/* ++ * at91-ac97.c -- AC'97 driver for atmel boards. ++ * ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006 Atmel ++ * ++ * Author: Patrice Vilchez <patrice.vilchez@atmel.com> ++ * Sedji Gaouaou <sedji.gaouaou@atmel.com> ++ * ATMEL CORP. ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/platform_device.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <linux/clk.h> ++#include <linux/atmel_pdc.h> ++#include <linux/io.h> ++ ++#include <sound/core.h> ++#include <sound/initval.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/ac97_codec.h> ++#include <sound/soc.h> ++ ++#include <asm/cacheflush.h> ++ ++#include <mach/hardware.h> ++#include <mach/gpio.h> ++#include <mach/board.h> ++ ++#include "at91-ac97.h" ++ ++ ++/* ++ * module parameters ++ */ ++static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; ++static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; ++static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; ++ ++module_param_array(index, int, NULL, 0444); ++MODULE_PARM_DESC(index, "Index value for AC97 controller"); ++module_param_array(id, charp, NULL, 0444); ++MODULE_PARM_DESC(id, "ID string for AC97 controller"); ++module_param_array(enable, bool, NULL, 0444); ++MODULE_PARM_DESC(enable, "Enable AC97 controller"); ++ ++typedef struct at91_ac97 { ++ spinlock_t lock; ++ void *regs; ++ int period; ++ struct clk *ac97_clk; ++ struct snd_pcm_substream *playback_substream; ++ struct snd_pcm_substream *capture_substream; ++ struct snd_card *card; ++ struct snd_pcm *pcm; ++ struct snd_ac97 *ac97; ++ struct snd_ac97_bus *ac97_bus; ++ int irq; ++ struct platform_device *pdev; ++ u8 reset_pin; ++} at91_ac97_t; ++ ++ ++/* ++ * PIO management functions ++ */ ++void at91_ac97c_drive_reset(at91_ac97_t *chip, unsigned int value) ++{ ++ at91_set_gpio_value(chip->reset_pin, value); ++} ++ ++static const char driver_name[] = "at91-ac97"; ++ ++ ++/* ++ * PCM part ++ */ ++static struct snd_pcm_hardware snd_at91_ac97_playback_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED ++ | SNDRV_PCM_INFO_MMAP ++ | SNDRV_PCM_INFO_MMAP_VALID ++ | SNDRV_PCM_INFO_BLOCK_TRANSFER), ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE ++ | SNDRV_PCM_FMTBIT_S16_BE), ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 2, ++ .channels_max = 2, ++ .buffer_bytes_max = 256*1024, ++ .period_bytes_min = 1024, ++ .period_bytes_max = 4*1024, ++ .periods_min = 1, ++ .periods_max = 64, ++}; ++ ++static struct snd_pcm_hardware snd_at91_ac97_capture_hw = { ++ .info = (SNDRV_PCM_INFO_INTERLEAVED ++ | SNDRV_PCM_INFO_MMAP ++ | SNDRV_PCM_INFO_MMAP_VALID ++ | SNDRV_PCM_INFO_BLOCK_TRANSFER), ++ .formats = (SNDRV_PCM_FMTBIT_S16_LE ++ | SNDRV_PCM_FMTBIT_S16_BE), ++ .rates = SNDRV_PCM_RATE_CONTINUOUS, ++ .rate_min = 8000, ++ .rate_max = 48000, ++ .channels_min = 1, ++ .channels_max = 2, ++ .buffer_bytes_max = 256*1024, ++ .period_bytes_min = 1024, ++ .period_bytes_max = 4*1024, ++ .periods_min = 1, ++ .periods_max = 64, ++}; ++ ++static int snd_at91_ac97_playback_open(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ runtime->hw = snd_at91_ac97_playback_hw; ++ chip->playback_substream = substream; ++ chip->period = 0; ++ ++ pr_debug("%s : snd_at91_ac97_playback_open\n\r", driver_name); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_capture_open(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ ++ runtime->hw = snd_at91_ac97_capture_hw; ++ chip->capture_substream = substream; ++ chip->period = 0; ++ ++ pr_debug("%s : snd_at91_ac97_capture_open\n\r", driver_name); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_playback_close(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ ++ chip->playback_substream = NULL; ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_capture_close(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ ++ chip->capture_substream = NULL; ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_playback_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *hw_params) ++{ ++ int err; ++ ++ err = snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(hw_params)); ++ ++ return err; ++} ++ ++static int snd_at91_ac97_capture_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *hw_params) ++{ ++ int err; ++ ++ err = snd_pcm_lib_malloc_pages(substream, ++ params_buffer_bytes(hw_params)); ++ ++ return err; ++} ++ ++static int snd_at91_ac97_playback_hw_free(struct snd_pcm_substream *substream) ++{ ++ ++ snd_pcm_lib_free_pages(substream); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_capture_hw_free(struct snd_pcm_substream *substream) ++{ ++ ++ snd_pcm_lib_free_pages(substream); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_playback_prepare(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ int block_size = frames_to_bytes(runtime, runtime->period_size); ++ unsigned long word = 0; ++ ++ pr_debug("%s : block_size = %d\n\r", driver_name, block_size); ++ ++ /* Assign slots to channels */ ++ switch (substream->runtime->channels) { ++ /* TODO: Support more than two channels */ ++ case 1: ++ word |= AT91C_AC97C_CHID3_CA; ++ break; ++ case 2: ++ default: ++ /* Assign Left and Right slots (3,4) to Channel A */ ++ word |= AT91C_AC97C_CHID3_CA | AT91C_AC97C_CHID4_CA; ++ break; ++ } ++ ++ ac97c_writel(chip, OCA, word); ++ ++ /* ++ * Configure sample format and size.. ++ */ ++ word = AT91C_AC97C_PDCEN | AT91C_AC97C_SIZE_16_BITS; ++ ++ switch (runtime->format) { ++ case SNDRV_PCM_FORMAT_S16_BE: ++ word |= AT91C_AC97C_CEM; ++ break; ++ case SNDRV_PCM_FORMAT_S16_LE: ++ default: ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, word); ++ ++ /* Set variable rate if needed */ ++ if (runtime->rate != 48000) { ++ word = ac97c_readl(chip, MR); ++ word |= AT91C_AC97C_VRA; ++ ac97c_writel(chip, MR, word); ++ } else { ++ /* Clear Variable Rate Bit */ ++ word = ac97c_readl(chip, MR); ++ word &= ~AT91C_AC97C_VRA; ++ ac97c_writel(chip, MR, word); ++ } ++ ++ /* Set rate */ ++ snd_ac97_set_rate(chip->ac97, AC97_PCM_FRONT_DAC_RATE, runtime->rate); ++ ++ pr_debug("%s : dma_addr = %x\n\r : dma_area = %x\n\r" ++ " : dma_bytes = %d\n\r", ++ driver_name, runtime->dma_addr, ++ runtime->dma_area, runtime->dma_bytes); ++ ++ /* Initialize and start the PDC */ ++ writel(runtime->dma_addr, chip->regs + ATMEL_PDC_TPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_TCR); ++ writel(runtime->dma_addr + block_size, chip->regs + ATMEL_PDC_TNPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_TNCR); ++ ++ /* Enable Channel A interrupts */ ++ ac97c_writel(chip, IER, AT91C_AC97C_CAEVT); ++ ++ pr_debug("%s : snd_at91_ac97_playback_prepare\n\r", driver_name); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_capture_prepare(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ int block_size = frames_to_bytes(runtime, runtime->period_size); ++ unsigned long word = 0; ++ ++ pr_debug("%s : block_size = %d\n\r", driver_name, block_size); ++ ++ ++ /* Assign slots to channels */ ++ switch (substream->runtime->channels) { ++ /* TODO: Support more than two channels */ ++ case 1: ++ word |= AT91C_AC97C_CHID3_CA; ++ break; ++ case 2: ++ default: ++ /* Assign Left and Right slots (3,4) to Channel A */ ++ word |= AT91C_AC97C_CHID3_CA | AT91C_AC97C_CHID4_CA; ++ break; ++ } ++ ++ ac97c_writel(chip, ICA, word); ++ ++ /* ++ * Configure sample format and size. ++ */ ++ word = AT91C_AC97C_PDCEN | AT91C_AC97C_SIZE_16_BITS; ++ ++ switch (runtime->format) { ++ case SNDRV_PCM_FORMAT_S16_BE: ++ word |= AT91C_AC97C_CEM; ++ break; ++ case SNDRV_PCM_FORMAT_S16_LE: ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, word); ++ ++ /* Set variable rate if needed */ ++ if (runtime->rate != 48000) { ++ word = ac97c_readl(chip, MR); ++ word |= AT91C_AC97C_VRA; ++ ac97c_writel(chip, MR, word); ++ } else { ++ /* Clear Variable Rate Bit */ ++ word = ac97c_readl(chip, MR); ++ word &= ~AT91C_AC97C_VRA; ++ ac97c_writel(chip, MR, word); ++ } ++ ++ /* Set rate */ ++ snd_ac97_set_rate(chip->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); ++ ++ pr_debug("%s : dma_addr = %x\n\r : dma_area = %x\n\r" ++ " : dma_bytes = %d\n\r", ++ driver_name, runtime->dma_addr, ++ runtime->dma_area, runtime->dma_bytes); ++ ++ /* Initialize and start the PDC */ ++ writel(runtime->dma_addr, chip->regs + ATMEL_PDC_RPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_RCR); ++ writel(runtime->dma_addr + block_size, chip->regs + ATMEL_PDC_RNPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_RNCR); ++ ++ /* Enable Channel A interrupts */ ++ ac97c_writel(chip, IER, AT91C_AC97C_CAEVT); ++ ++ pr_debug("%s : snd_at91_ac97_capture_prepare\n\r", driver_name); ++ ++ return 0; ++} ++ ++static int snd_at91_ac97_playback_trigger(struct snd_pcm_substream *substream, ++ int cmd) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ unsigned long camr, ptcr = 0, flags; ++ int err = 0; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ camr = ac97c_readl(chip, CAMR); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ camr |= (AT91C_AC97C_CEN | AT91C_AC97C_ENDTX); ++ ptcr = ATMEL_PDC_TXTEN; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ camr &= ~(AT91C_AC97C_CEN | AT91C_AC97C_ENDTX); ++ ptcr = ATMEL_PDC_TXTDIS; ++ break; ++ default: ++ err = -EINVAL; ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, camr); ++ ++ writel(ptcr, chip->regs + ATMEL_PDC_PTCR); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ pr_debug("%s : snd_at91_ac97_playback_trigger\n\r", driver_name); ++ ++ return err; ++} ++ ++static int snd_at91_ac97_capture_trigger(struct snd_pcm_substream *substream, ++ int cmd) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ unsigned long camr, ptcr = 0, flags; ++ int err = 0; ++ ++ spin_lock_irqsave(&chip->lock, flags); ++ camr = ac97c_readl(chip, CAMR); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ camr |= (AT91C_AC97C_CEN | ++ AT91C_AC97C_ENDRX | ++ AT91C_AC97C_OVRUN); ++ ptcr = ATMEL_PDC_RXTEN; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ camr &= ~(AT91C_AC97C_CEN | ++ AT91C_AC97C_ENDRX | ++ AT91C_AC97C_OVRUN); ++ ptcr = ATMEL_PDC_RXTDIS; ++ break; ++ default: ++ err = -EINVAL; ++ break; ++ } ++ ++ ac97c_writel(chip, CAMR, camr); ++ ++ writel(ptcr, chip->regs + ATMEL_PDC_PTCR); ++ ++ spin_unlock_irqrestore(&chip->lock, flags); ++ ++ pr_debug("%s : snd_at91_ac97_capture_trigger\n\r", driver_name); ++ ++ return err; ++} ++ ++static snd_pcm_uframes_t ++snd_at91_ac97_playback_pointer(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ snd_pcm_uframes_t pos; ++ unsigned long bytes; ++ ++ bytes = readl(chip->regs + ATMEL_PDC_TPR) - runtime->dma_addr; ++ ++ pos = bytes_to_frames(runtime, bytes); ++ ++ if (pos >= runtime->buffer_size) ++ pos -= runtime->buffer_size; ++ ++ pr_debug("%s : snd_at91_ac97_playback_pointer\n\r", driver_name); ++ ++ return pos; ++} ++ ++static snd_pcm_uframes_t ++snd_at91_ac97_capture_pointer(struct snd_pcm_substream *substream) ++{ ++ at91_ac97_t *chip = snd_pcm_substream_chip(substream); ++ struct snd_pcm_runtime *runtime = substream->runtime; ++ snd_pcm_uframes_t pos; ++ unsigned long bytes; ++ ++ bytes = readl(chip->regs + ATMEL_PDC_RPR) - runtime->dma_addr; ++ pos = bytes_to_frames(runtime, bytes); ++ if (pos >= runtime->buffer_size) ++ pos -= runtime->buffer_size; ++ ++ pr_debug("%s : snd_at91_ac97_capture_pointer\n\r", driver_name); ++ ++ return pos; ++} ++ ++static struct snd_pcm_ops at91_ac97_playback_ops = { ++ .open = snd_at91_ac97_playback_open, ++ .close = snd_at91_ac97_playback_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = snd_at91_ac97_playback_hw_params, ++ .hw_free = snd_at91_ac97_playback_hw_free, ++ .prepare = snd_at91_ac97_playback_prepare, ++ .trigger = snd_at91_ac97_playback_trigger, ++ .pointer = snd_at91_ac97_playback_pointer, ++}; ++ ++static struct snd_pcm_ops at91_ac97_capture_ops = { ++ .open = snd_at91_ac97_capture_open, ++ .close = snd_at91_ac97_capture_close, ++ .ioctl = snd_pcm_lib_ioctl, ++ .hw_params = snd_at91_ac97_capture_hw_params, ++ .hw_free = snd_at91_ac97_capture_hw_free, ++ .prepare = snd_at91_ac97_capture_prepare, ++ .trigger = snd_at91_ac97_capture_trigger, ++ .pointer = snd_at91_ac97_capture_pointer, ++}; ++ ++static struct ac97_pcm at91_ac97_pcm_defs[] __devinitdata = { ++ /* Playback */ ++ { ++ .exclusive = 1, ++ .r = { { ++ .slots = ((1 << AC97_SLOT_PCM_LEFT) ++ | (1 << AC97_SLOT_PCM_RIGHT)), ++ } }, ++ }, ++ /* PCM in */ ++ { ++ .stream = 1, ++ .exclusive = 1, ++ .r = { { ++ .slots = ((1 << AC97_SLOT_PCM_LEFT) ++ | (1 << AC97_SLOT_PCM_RIGHT)), ++ } } ++ }, ++ /* Mic in */ ++ { ++ .stream = 1, ++ .exclusive = 1, ++ .r = { { ++ .slots = (1<<AC97_SLOT_MIC), ++ } } ++ }, ++}; ++ ++static int __devinit snd_at91_ac97_pcm_new(at91_ac97_t *chip) ++{ ++ struct snd_pcm *pcm; ++ int err; ++ ++ err = snd_ac97_pcm_assign(chip->ac97_bus, ++ ARRAY_SIZE(at91_ac97_pcm_defs), ++ at91_ac97_pcm_defs); ++ if (err) ++ return err; ++ ++ err = snd_pcm_new(chip->card, "Atmel AC97", 0, 1, 1, &pcm); ++ if (err) ++ return err; ++ ++ snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, ++ &chip->pdev->dev, ++ 128 * 1024, 256 * 1024); ++ ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, ++ &at91_ac97_playback_ops); ++ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &at91_ac97_capture_ops); ++ ++ pcm->private_data = chip; ++ pcm->info_flags = 0; ++ strcpy(pcm->name, "Atmel AC97"); ++ chip->pcm = pcm; ++ ++ return 0; ++} ++ ++ ++/* ++ * Mixer part ++ */ ++static int snd_at91_ac97_mixer_new(at91_ac97_t *chip) ++{ ++ int err; ++ struct snd_ac97_template template; ++ ++ memset(&template, 0, sizeof(template)); ++ template.private_data = chip; ++ template.num = 0; ++ template.addr = 0; ++ err = snd_ac97_mixer(chip->ac97_bus, &template, &chip->ac97); ++ ++ return err; ++} ++ ++static irqreturn_t snd_at91_ac97_interrupt(int irq, void *dev_id) ++{ ++ at91_ac97_t *chip = dev_id; ++ unsigned long status; ++ unsigned long dummy; ++ ++ status = ac97c_readl(chip, SR); ++ ++ if (status & AT91C_AC97C_CAEVT) { ++ struct snd_pcm_runtime *runtime; ++ int offset, next_period, block_size; ++ unsigned long casr, camr, test; ++ ++ casr = ac97c_readl(chip, CASR); ++ camr = ac97c_readl(chip, CAMR); ++ test = casr & camr; ++ ++ if ((casr & camr) & AT91C_AC97C_ENDTX) { ++ runtime = chip->playback_substream->runtime; ++ block_size = frames_to_bytes(runtime, ++ runtime->period_size); ++ chip->period++; ++ ++ if (chip->period == runtime->periods) ++ chip->period = 0; ++ next_period = chip->period + 1; ++ if (next_period == runtime->periods) ++ next_period = 0; ++ ++ offset = block_size * next_period; ++ ++ writel(runtime->dma_addr + offset, ++ chip->regs + ATMEL_PDC_TNPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_TNCR); ++ ++ snd_pcm_period_elapsed(chip->playback_substream); ++ } ++ if ((casr & camr) & AT91C_AC97C_ENDRX) { ++ runtime = chip->capture_substream->runtime; ++ block_size = frames_to_bytes(runtime, ++ runtime->period_size); ++ chip->period++; ++ ++ if (chip->period == runtime->periods) ++ chip->period = 0; ++ next_period = chip->period + 1; ++ if (next_period == runtime->periods) ++ next_period = 0; ++ ++ offset = block_size * next_period; ++ ++ writel(runtime->dma_addr + offset, ++ chip->regs + ATMEL_PDC_RNPR); ++ writel(block_size / 2, chip->regs + ATMEL_PDC_RNCR); ++ snd_pcm_period_elapsed(chip->capture_substream); ++ } ++ if ((casr & camr) & AT91C_AC97C_OVRUN) ++ printk(KERN_INFO " AC97_irq - overrun!\n"); ++ } else { ++ printk(KERN_WARNING ++ "Spurious AC97 interrupt, status = 0x%08lx\n", ++ status); ++ } ++ ++ dummy = ac97c_readl(chip, SR); ++ ++ return IRQ_HANDLED; ++} ++ ++ ++/* ++ * CODEC part ++ */ ++static void snd_at91_ac97_hard_reset(at91_ac97_t *chip) ++{ ++ /* Enable AC97 Controller.*/ ++ /* Perform a cold (hard) reset of the AC97 codec.*/ ++ ac97c_writel(chip, MR, 0); ++ ac97c_writel(chip, MR, AT91C_AC97C_ENA); ++ ++ at91_ac97c_drive_reset(chip, 0); ++ udelay(1); ++ at91_ac97c_drive_reset(chip, 1); ++ udelay(1); ++} ++ ++static void snd_at91_ac97_write(struct snd_ac97 *ac97, unsigned short reg, ++ unsigned short val) ++{ ++ at91_ac97_t *chip = ac97->private_data; ++ unsigned long word; ++ int timeout = 0x100; ++ ++ pr_debug("%s : Writing codec register 0x%x = 0x%x\n\r", ++ driver_name, reg, val); ++ ++ word = (reg & 0x7f) << 16 | val; ++ ++ do { ++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_TXRDY) { ++ ac97c_writel(chip, COTHR, word); ++ return; ++ } ++ udelay(1); ++ } while (--timeout); ++ ++ snd_printk(KERN_WARNING "at91-ac97: codec write timeout\n\r"); ++} ++ ++static unsigned short snd_at91_ac97_read(struct snd_ac97 *ac97, ++ unsigned short reg) ++{ ++ at91_ac97_t *chip = ac97->private_data; ++ unsigned long word; ++ int timeout = 40; ++ ++ word = (0x80 | (reg & 0x7f)) << 16; ++ ++ do { ++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_TXRDY) { ++ ac97c_writel(chip, COTHR, word); ++ break; ++ } ++ udelay(1); ++ } while (--timeout); ++ ++ if (!timeout) ++ goto timed_out; ++ ++ timeout = 0x100; ++ ++ do { ++ if (ac97c_readl(chip, COSR) & AT91C_AC97C_RXRDY) { ++ unsigned short val = ++ (unsigned short) ac97c_readl(chip, CORHR); ++ return val; ++ } ++ udelay(1); ++ } while (--timeout); ++ ++ if (!timeout) ++ goto timed_out; ++ ++timed_out: ++ snd_printk(KERN_WARNING "at91-ac97: codec write timeout\n\r"); ++ return 0xffff; ++} ++ ++static void snd_at91_ac97_warm_reset(struct snd_ac97 *ac97) ++{ ++ at91_ac97_t *chip = ac97->private_data; ++ unsigned int mr = ac97c_readl(chip, MR); ++ ++ mr |= AT91C_AC97C_WRST; ++ ++ ac97c_writel(chip, MR, mr); ++ udelay(1); ++ ++ mr &= ~AT91C_AC97C_WRST; ++ ac97c_writel(chip, MR, mr); ++} ++ ++static void snd_at91_ac97_destroy(struct snd_card *card) ++{ ++ at91_ac97_t *chip = get_chip(card); ++ ++ if (chip->irq != -1) ++ free_irq(chip->irq, chip); ++ ++ if (chip->regs) ++ iounmap(chip->regs); ++} ++ ++static int __devinit snd_at91_ac97_create(struct snd_card *card, ++ struct platform_device *pdev) ++{ ++ static struct snd_ac97_bus_ops ops = { ++ .write = snd_at91_ac97_write, ++ .read = snd_at91_ac97_read, ++ .reset = snd_at91_ac97_warm_reset, ++ }; ++ ++ at91_ac97_t *chip = get_chip(card); ++ int irq, err = 0; ++ ++ ++ ++ card->private_free = snd_at91_ac97_destroy; ++ ++ spin_lock_init(&chip->lock); ++ chip->card = card; ++ chip->pdev = pdev; ++ chip->irq = -1; ++ ++ if (!(platform_resource_flags(pdev, 0) & IORESOURCE_MEM) ++ || !(platform_resource_flags(pdev, 1) & IORESOURCE_IRQ)) ++ return -ENODEV; ++ ++ irq = platform_resource_start(pdev, 1); ++ ++ err = request_irq(irq, snd_at91_ac97_interrupt, 0, "ac97", chip); ++ if (err) { ++ snd_printk(KERN_WARNING "unable to request IRQ%d\n", irq); ++ return err; ++ } ++ ++ chip->irq = irq; ++ snd_printk(KERN_INFO "AC97C regs = %08X \n", ++ platform_resource_start(pdev, 0)); ++ snd_printk(KERN_INFO "AC97C irq = %d \n", irq); ++ ++ chip->regs = ioremap(platform_resource_start(pdev, 0), ++ platform_resource_len(pdev, 0)); ++ if (!chip->regs) { ++ snd_printk(KERN_WARNING "unable to remap AC97C io memory\n"); ++ return -ENOMEM; ++ } ++ ++ snd_card_set_dev(card, &pdev->dev); ++ ++ err = snd_ac97_bus(card, 0, &ops, chip, &chip->ac97_bus); ++ ++ return err; ++} ++ ++static int __devinit snd_at91_ac97_probe(struct platform_device *pdev) ++{ ++ static int dev; ++ struct atmel_ac97_data *pdata = pdev->dev.platform_data; ++ struct snd_card *card; ++ at91_ac97_t *chip; ++ int err; ++ ++ if (dev >= SNDRV_CARDS) ++ return -ENODEV; ++ if (!enable[dev]) { ++ dev++; ++ return -ENOENT; ++ } ++ ++ card = snd_card_new(index[dev], id[dev], THIS_MODULE, ++ sizeof(at91_ac97_t)); ++ if (!card) ++ return -ENOMEM; ++ chip = get_chip(card); ++ ++ err = snd_at91_ac97_create(card, pdev); ++ if (err) ++ goto out_free_card; ++ ++ /* Enable AC97 Controller clock*/ ++ chip->reset_pin = pdata->reset_pin; ++ chip->ac97_clk = clk_get(NULL, "ac97_clk"); ++ if (!chip->ac97_clk) ++ goto out_free_card; ++ ++ clk_enable(chip->ac97_clk); ++ ++ /* Perform a codec hard reset.*/ ++ /* This also enables the AC97 Controller.*/ ++ snd_at91_ac97_hard_reset(chip); ++ ++ err = snd_at91_ac97_mixer_new(chip); ++ if (err) ++ goto out_free_card; ++ ++ err = snd_at91_ac97_pcm_new(chip); ++ if (err) ++ goto out_free_card; ++ ++ strcpy(card->driver, "ac97c"); ++ strcpy(card->shortname, "Atmel AC97"); ++ sprintf(card->longname, "Atmel AC97 Controller at %#lx, irq %i", ++ (unsigned long) platform_resource_start(pdev, 0), ++ (int) chip->irq); ++ ++ err = snd_card_register(card); ++ if (err) ++ goto out_free_card; ++ ++ dev_set_drvdata(&pdev->dev, card); ++ dev++; ++ return 0; ++ ++out_free_card: ++ snd_card_free(card); ++ return err; ++} ++ ++static int __devexit snd_at91_ac97_remove(struct platform_device *pdev) ++{ ++ struct snd_card *card = dev_get_drvdata(&pdev->dev); ++ at91_ac97_t *chip = get_chip(card); ++ ++ ++ snd_card_free(card); ++ ++ /* Disable AC97 Controller*/ ++ ac97c_writel(chip, MR, 0); ++ ++ /* Disable AC97 Controller clock*/ ++ clk_disable(chip->ac97_clk); ++ ++ dev_set_drvdata(&pdev->dev, NULL); ++ ++ return 0; ++} ++ ++static struct platform_driver at91_ac97_driver = { ++ .probe = snd_at91_ac97_probe, ++ .remove = __devexit_p(snd_at91_ac97_remove), ++ .driver = ++ { ++ .name = "ac97c", ++ } ++ , ++}; ++ ++static int __init at91_ac97_init(void) ++{ ++ return platform_driver_register(&at91_ac97_driver); ++} ++ ++static void __exit at91_ac97_exit(void) ++{ ++ platform_driver_unregister(&at91_ac97_driver); ++} ++ ++module_init(at91_ac97_init); ++module_exit(at91_ac97_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("Driver for Atmel AC97 Controller"); ++MODULE_AUTHOR("Atmel"); +--- /dev/null ++++ linux-2.6.30/sound/arm/at91-ac97.h +@@ -0,0 +1,295 @@ ++/* ++ * at91-ac97.h -- Hardware definition for the ac97c peripheral ++ * in the ATMEL at91sam926x processor ++ * ++ * Copyright (C) 2005 SAN People ++ * Copyright (C) 2006 Atmel ++ * ++ * Author: Patrice Vilchez <patrice.vilchez@atmel.com> ++ * ATMEL CORP. ++ * ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __AC97C_H ++#define __AC97C_H ++ ++/* -------------------------------------------------------- */ ++/* AC97C ID definitions for AT91SAM926x */ ++/* -------------------------------------------------------- */ ++#ifndef AT91C_ID_AC97C ++#define AT91C_ID_AC97C 18 /**< AC97 Controller id */ ++#endif /* AT91C_ID_AC97C */ ++ ++/* -------------------------------------------------------- */ ++/* AC97C Base Address definitions for AT91SAM926x */ ++/* -------------------------------------------------------- */ ++#define AT91C_BASE_AC97C 0xFFFA0000 /**< AC97C base address */ ++ ++/* -------------------------------------------------------- */ ++/* PIO definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++#define AT91C_PB1_AC97CK (1 << 1) /**< */ ++#define AT91C_PB0_AC97FS (1 << 0) /**< */ ++#define AT91C_PB3_AC97RX (1 << 3) /**< */ ++#define AT91C_PB2_AC97TX (1 << 2) /**< */ ++ ++/* -------------------------------------------------------- */ ++/* Register offset definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++#define AC97C_MR (0x0008) /**< Mode Register */ ++#define AC97C_ICA (0x0010) /**< Input Channel AssignementRegister */ ++#define AC97C_OCA (0x0014) /**< Output Channel Assignement Register */ ++#define AC97C_CARHR (0x0020) /**< Channel A Receive Holding Register */ ++#define AC97C_CATHR (0x0024) /**< Channel A Transmit Holding Register */ ++#define AC97C_CASR (0x0028) /**< Channel A Status Register */ ++#define AC97C_CAMR (0x002C) /**< Channel A Mode Register */ ++#define AC97C_CBRHR (0x0030) /**< Channel B Receive Holding Register (optional) */ ++#define AC97C_CBTHR (0x0034) /**< Channel B Transmit Holding Register (optional) */ ++#define AC97C_CBSR (0x0038) /**< Channel B Status Register */ ++#define AC97C_CBMR (0x003C) /**< Channel B Mode Register */ ++#define AC97C_CORHR (0x0040) /**< COdec Transmit Holding Register */ ++#define AC97C_COTHR (0x0044) /**< COdec Transmit Holding Register */ ++#define AC97C_COSR (0x0048) /**< CODEC Status Register */ ++#define AC97C_COMR (0x004C) /**< CODEC Mask Status Register */ ++#define AC97C_SR (0x0050) /**< Status Register */ ++#define AC97C_IER (0x0054) /**< Interrupt Enable Register */ ++#define AC97C_IDR (0x0058) /**< Interrupt Disable Register */ ++#define AC97C_IMR (0x005C) /**< Interrupt Mask Register */ ++#define AC97C_VERSION (0x00FC) /**< Version Register */ ++ ++/* -------------------------------------------------------- */ ++/* Bitfields definition for AC97C hardware peripheral */ ++/* -------------------------------------------------------- */ ++/* --- Register AC97C_MR */ ++#define AT91C_AC97C_ENA (0x1 << 0) /**< (AC97C) AC97 Controller Global Enable */ ++#define AT91C_AC97C_WRST (0x1 << 1) /**< (AC97C) Warm Reset */ ++#define AT91C_AC97C_VRA (0x1 << 2) /**< (AC97C) Variable RAte (for Data Slots) */ ++/* --- Register AC97C_ICA */ ++#define AT91C_AC97C_CHID3 (0x7 << 0) /**< (AC97C) Channel Id for the input slot 3 */ ++#define AT91C_AC97C_CHID3_NONE 0x0 /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CA 0x1 /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CB 0x2 /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CC 0x3 /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4 (0x7 << 3) /**< (AC97C) Channel Id for the input slot 4 */ ++#define AT91C_AC97C_CHID4_NONE (0x0 << 3) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CA (0x1 << 3) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CB (0x2 << 3) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CC (0x3 << 3) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5 (0x7 << 6) /**< (AC97C) Channel Id for the input slot 5 */ ++#define AT91C_AC97C_CHID5_NONE (0x0 << 6) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CA (0x1 << 6) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CB (0x2 << 6) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CC (0x3 << 6) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6 (0x7 << 9) /**< (AC97C) Channel Id for the input slot 6 */ ++#define AT91C_AC97C_CHID6_NONE (0x0 << 9) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CA (0x1 << 9) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CB (0x2 << 9) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CC (0x3 << 9) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7 (0x7 << 12) /**< (AC97C) Channel Id for the input slot 7 */ ++#define AT91C_AC97C_CHID7_NONE (0x0 << 12) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CA (0x1 << 12) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CB (0x2 << 12) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CC (0x3 << 12) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8 (0x7 << 15) /**< (AC97C) Channel Id for the input slot 8 */ ++#define AT91C_AC97C_CHID8_NONE (0x0 << 15) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CA (0x1 << 15) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CB (0x2 << 15) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CC (0x3 << 15) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9 (0x7 << 18) /**< (AC97C) Channel Id for the input slot 9 */ ++#define AT91C_AC97C_CHID9_NONE (0x0 << 18) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CA (0x1 << 18) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CB (0x2 << 18) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CC (0x3 << 18) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10 (0x7 << 21) /**< (AC97C) Channel Id for the input slot 10 */ ++#define AT91C_AC97C_CHID10_NONE (0x0 << 21) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CA (0x1 << 21) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CB (0x2 << 21) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CC (0x3 << 21) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11 (0x7 << 24) /**< (AC97C) Channel Id for the input slot 11 */ ++#define AT91C_AC97C_CHID11_NONE (0x0 << 24) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CA (0x1 << 24) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CB (0x2 << 24) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CC (0x3 << 24) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12 (0x7 << 27) /**< (AC97C) Channel Id for the input slot 12 */ ++#define AT91C_AC97C_CHID12_NONE (0x0 << 27) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CA (0x1 << 27) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CB (0x2 << 27) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CC (0x3 << 27) /**< (AC97C) Channel C data will be transmitted during this slot */ ++/* --- Register AC97C_OCA */ ++#define AT91C_AC97C_CHID3 (0x7 << 0) /**< (AC97C) Channel Id for the input slot 3 */ ++#define AT91C_AC97C_CHID3_NONE 0x0 /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CA 0x1 /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CB 0x2 /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID3_CC 0x3 /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4 (0x7 << 3) /**< (AC97C) Channel Id for the input slot 4 */ ++#define AT91C_AC97C_CHID4_NONE (0x0 << 3) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CA (0x1 << 3) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CB (0x2 << 3) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID4_CC (0x3 << 3) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5 (0x7 << 6) /**< (AC97C) Channel Id for the input slot 5 */ ++#define AT91C_AC97C_CHID5_NONE (0x0 << 6) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CA (0x1 << 6) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CB (0x2 << 6) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID5_CC (0x3 << 6) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6 (0x7 << 9) /**< (AC97C) Channel Id for the input slot 6 */ ++#define AT91C_AC97C_CHID6_NONE (0x0 << 9) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CA (0x1 << 9) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CB (0x2 << 9) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID6_CC (0x3 << 9) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7 (0x7 << 12) /**< (AC97C) Channel Id for the input slot 7 */ ++#define AT91C_AC97C_CHID7_NONE (0x0 << 12) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CA (0x1 << 12) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CB (0x2 << 12) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID7_CC (0x3 << 12) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8 (0x7 << 15) /**< (AC97C) Channel Id for the input slot 8 */ ++#define AT91C_AC97C_CHID8_NONE (0x0 << 15) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CA (0x1 << 15) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CB (0x2 << 15) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID8_CC (0x3 << 15) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9 (0x7 << 18) /**< (AC97C) Channel Id for the input slot 9 */ ++#define AT91C_AC97C_CHID9_NONE (0x0 << 18) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CA (0x1 << 18) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CB (0x2 << 18) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID9_CC (0x3 << 18) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10 (0x7 << 21) /**< (AC97C) Channel Id for the input slot 10 */ ++#define AT91C_AC97C_CHID10_NONE (0x0 << 21) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CA (0x1 << 21) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CB (0x2 << 21) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID10_CC (0x3 << 21) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11 (0x7 << 24) /**< (AC97C) Channel Id for the input slot 11 */ ++#define AT91C_AC97C_CHID11_NONE (0x0 << 24) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CA (0x1 << 24) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CB (0x2 << 24) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID11_CC (0x3 << 24) /**< (AC97C) Channel C data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12 (0x7 << 27) /**< (AC97C) Channel Id for the input slot 12 */ ++#define AT91C_AC97C_CHID12_NONE (0x0 << 27) /**< (AC97C) No data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CA (0x1 << 27) /**< (AC97C) Channel A data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CB (0x2 << 27) /**< (AC97C) Channel B data will be transmitted during this slot */ ++#define AT91C_AC97C_CHID12_CC (0x3 << 27) /**< (AC97C) Channel C data will be transmitted during this slot */ ++/* --- Register AC97C_CARHR */ ++#define AT91C_AC97C_RDATA (0xFFFFF << 0) /**< (AC97C) Receive data */ ++/* --- Register AC97C_CATHR */ ++#define AT91C_AC97C_TDATA (0xFFFFF << 0) /**< (AC97C) Transmit data */ ++/* --- Register AC97C_CASR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5) /**< (AC97C) */ ++#define AT91C_AC97C_ENDTX (0x1 << 10) /**< (AC97C) */ ++#define AT91C_AC97C_TXBUFE (0x1 << 11) /**< (AC97C) */ ++#define AT91C_AC97C_ENDRX (0x1 << 14) /**< (AC97C) */ ++#define AT91C_AC97C_RXBUFF (0x1 << 15) /**< (AC97C) */ ++/* --- Register AC97C_CAMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5) /**< (AC97C) */ ++#define AT91C_AC97C_ENDTX (0x1 << 10) /**< (AC97C) */ ++#define AT91C_AC97C_TXBUFE (0x1 << 11) /**< (AC97C) */ ++#define AT91C_AC97C_ENDRX (0x1 << 14) /**< (AC97C) */ ++#define AT91C_AC97C_RXBUFF (0x1 << 15) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE (0x3 << 16) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE_20_BITS (0x0 << 16) /**< (AC97C) Data size is 20 bits */ ++#define AT91C_AC97C_SIZE_18_BITS (0x1 << 16) /**< (AC97C) Data size is 18 bits */ ++#define AT91C_AC97C_SIZE_16_BITS (0x2 << 16) /**< (AC97C) Data size is 16 bits */ ++#define AT91C_AC97C_SIZE_10_BITS (0x3 << 16) /**< (AC97C) Data size is 10 bits */ ++#define AT91C_AC97C_CEM (0x1 << 18) /**< (AC97C) */ ++#define AT91C_AC97C_CEN (0x1 << 21) /**< (AC97C) */ ++#define AT91C_AC97C_PDCEN (0x1 << 22) /**< (AC97C) */ ++/* --- Register AC97C_CBRHR */ ++#define AT91C_AC97C_RDATA (0xFFFFF << 0) /**< (AC97C) Receive data */ ++/* --- Register AC97C_CBTHR */ ++#define AT91C_AC97C_TDATA (0xFFFFF << 0) /**< (AC97C) Transmit data */ ++/* --- Register AC97C_CBSR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5) /**< (AC97C) */ ++/* --- Register AC97C_CBMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++#define AT91C_AC97C_OVRUN (0x1 << 5) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE (0x3 << 16) /**< (AC97C) */ ++#define AT91C_AC97C_SIZE_20_BITS (0x0 << 16) /**< (AC97C) Data size is 20 bits */ ++#define AT91C_AC97C_SIZE_18_BITS (0x1 << 16) /**< (AC97C) Data size is 18 bits */ ++#define AT91C_AC97C_SIZE_16_BITS (0x2 << 16) /**< (AC97C) Data size is 16 bits */ ++#define AT91C_AC97C_SIZE_10_BITS (0x3 << 16) /**< (AC97C) Data size is 10 bits */ ++#define AT91C_AC97C_CEM (0x1 << 18) /**< (AC97C) */ ++#define AT91C_AC97C_CEN (0x1 << 21) /**< (AC97C) */ ++/* --- Register AC97C_CORHR */ ++#define AT91C_AC97C_SDATA (0xFFFF << 0) /**< (AC97C) Status Data */ ++/* --- Register AC97C_COTHR */ ++#define AT91C_AC97C_CDATA (0xFFFF << 0) /**< (AC97C) Command Data */ ++#define AT91C_AC97C_CADDR (0x7F << 16) /**< (AC97C) COdec control register index */ ++#define AT91C_AC97C_READ (0x1 << 23) /**< (AC97C) Read/Write command */ ++/* --- Register AC97C_COSR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++/* --- Register AC97C_COMR */ ++#define AT91C_AC97C_TXRDY (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_TXEMPTY (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_UNRUN (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_RXRDY (0x1 << 4) /**< (AC97C) */ ++/* --- Register AC97C_SR */ ++#define AT91C_AC97C_SOF (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4) /**< (AC97C) */ ++/* --- Register AC97C_IER */ ++#define AT91C_AC97C_SOF (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4) /**< (AC97C) */ ++/* --- Register AC97C_IDR */ ++#define AT91C_AC97C_SOF (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4) /**< (AC97C) */ ++/* --- Register AC97C_IMR */ ++#define AT91C_AC97C_SOF (0x1 << 0) /**< (AC97C) */ ++#define AT91C_AC97C_WKUP (0x1 << 1) /**< (AC97C) */ ++#define AT91C_AC97C_COEVT (0x1 << 2) /**< (AC97C) */ ++#define AT91C_AC97C_CAEVT (0x1 << 3) /**< (AC97C) */ ++#define AT91C_AC97C_CBEVT (0x1 << 4) /**< (AC97C) */ ++ ++#define platform_num_resources(dev) ((dev)->num_resources) ++#define platform_resource_start(dev, i) ((dev)->resource[(i)].start) ++#define platform_resource_end(dev, i) ((dev)->resource[(i)].end) ++#define platform_resource_flags(dev, i) ((dev)->resource[(i)].flags) ++#define platform_resource_len(dev, i) \ ++ (platform_resource_end((dev), (i)) - \ ++ platform_resource_start((dev), (i)) + 1) ++ ++#define get_chip(card) ((at91_ac97_t *)(card)->private_data) ++ ++#define ac97c_writel(chip, reg, val) \ ++ writel((val), (chip)->regs + AC97C_##reg) ++ ++#define ac97c_readl(chip, reg) \ ++ readl((chip)->regs + AC97C_##reg) ++ ++#endif /* __AC97C_H */ diff --git a/recipes/linux/linux_2.6.30.bb b/recipes/linux/linux_2.6.30.bb index b168bfc161..5dc9451c40 100644 --- a/recipes/linux/linux_2.6.30.bb +++ b/recipes/linux/linux_2.6.30.bb @@ -9,8 +9,13 @@ DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_mpc8315e-rdb = "1" DEFAULT_PREFERENCE_mx27ads = "1" +# machine boots with it, works but was not tested too much +DEFAULT_PREFERENCE_at91sam9263ek = "-1" + SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ http://maxim.org.za/AT91RM9200/2.6/2.6.30-at91.patch.gz;patch=1 \ file://defconfig" SRC_URI_append_mpc8315e-rdb = " file://mpc8315erdb-add-msi-to-dts.patch;patch=1" + +SRC_URI_append_at91sam9263ek = " file://hrw-linux-2.6.30-exp.patch;patch=1 " |