diff options
Diffstat (limited to 'recipes')
7 files changed, 260 insertions, 3472 deletions
diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/aufs-squashfs-mount-to-avoid-initramfs.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/aufs-squashfs-mount-to-avoid-initramfs.patch index 9a9b982fef..ed5cbfc1b9 100644 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/aufs-squashfs-mount-to-avoid-initramfs.patch +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/aufs-squashfs-mount-to-avoid-initramfs.patch @@ -7,7 +7,7 @@ + int do_special = 0; + if (strcmp(root_device_name, "special") == 0) + do_special = 1; -+ //do_special = 1; ++ do_special = 1; + + if (do_special) { + dev_t ROOT_DEV_RO; @@ -24,7 +24,7 @@ + } + + sys_mkdir("/root-rw", 0700); -+ ROOT_DEV_RW = name_to_dev_t("/dev/mmcblk0p3"); ++ ROOT_DEV_RW = name_to_dev_t("/dev/mmcblk0p4"); + create_dev("/dev/root-rw", ROOT_DEV_RW); + if (sys_mount("/dev/root-rw", "/root-rw", "ext3", MS_SILENT, NULL) != 0) + goto no_special; diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3beagle.c b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3beagle.c deleted file mode 100644 index 26efafff21..0000000000 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/board-omap3beagle.c +++ /dev/null @@ -1,739 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3beagle.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> - -#include <mach/mcspi.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/mma7455l.h> - -#include <mach/dmtimer.h> -#include <linux/backlight.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> -#include <linux/omapfb.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <mach/board.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/display.h> - -#include "twl4030-generic-scripts.h" -#include "mmc-twl4030.h" - - -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - -#define NAND_BLOCK_SIZE SZ_128K - -#define OMAP3_AC_GPIO 136 //Int1 DRDY -#define OMAP3_TS_GPIO 162 -#define TB_BL_PWM_TIMER 9 -#define TB_KILL_POWER_GPIO 168 - -static struct mtd_partition omap3beagle_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - -static struct resource omap3beagle_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3beagle_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3beagle_nand_data, - }, - .num_resources = 1, - .resource = &omap3beagle_nand_resource, -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap_uart_config omap3_beagle_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), -}; - -static struct twl4030_usb_data beagle_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_hsmmc_info mmc[] = { - { - .mmc = 1, - .wires = 8, - .gpio_wp = 29, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply beagle_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply beagle_vsim_supply = { - .supply = "vmmc_aux", -}; - -static struct gpio_led gpio_leds[]; - -static int beagle_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - - /* link regulators to MMC adapters */ - beagle_vmmc1_supply.dev = mmc[0].dev; - beagle_vsim_supply.dev = mmc[0].dev; - - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - -#if 0 /* TODO: This needs to be modified to not rely on u-boot */ - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - return 0; -} - -static struct twl4030_gpio_platform_data beagle_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = beagle_twl_gpio_setup, -}; - -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct regulator_consumer_supply beagle_vdac_supply = { - .supply = "vdac", - .dev = &omap3_beagle_lcd_device.dev, -}; - -static struct regulator_consumer_supply beagle_vdvi_supply = { - .supply = "vdvi", - .dev = &omap3_beagle_lcd_device.dev, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data beagle_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data beagle_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data beagle_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data beagle_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdvi_supply, -}; - -static const struct twl4030_resconfig beagle_resconfig[] = { - /* disable regulators that u-boot left enabled; the - * devices' drivers should be managing these. - */ - { .resource = RES_VAUX3, }, /* not even connected! */ - { .resource = RES_VMMC1, }, - { .resource = RES_VSIM, }, - { .resource = RES_VPLL2, }, - { .resource = RES_VDAC, }, - { .resource = RES_VUSB_1V5, }, - { .resource = RES_VUSB_1V8, }, - { .resource = RES_VUSB_3V1, }, - { 0, }, -}; - -static struct twl4030_power_data beagle_power_data = { - .resource_config = beagle_resconfig, - /* REVISIT can't use GENERIC3430_T2SCRIPTS_DATA; - * among other things, it makes reboot fail. - */ -}; - -static struct twl4030_bci_platform_data touchbook_bci_data = { - .tblsize = 0, - .no_backup_battery = 1, -}; - -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &beagle_usb_data, - .gpio = &beagle_gpio_data, - .power = &beagle_power_data, - .vmmc1 = &beagle_vmmc1, - .vsim = &beagle_vsim, - .vdac = &beagle_vdac, - .vpll2 = &beagle_vpll2, - - /* TouchBook BCI */ - .bci = &touchbook_bci_data, -}; - -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - -static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("bq27200", 0x55), - }, -}; - -static int __init omap3_beagle_i2c_init(void) -{ - /* Standard BeagleBoard bus */ - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); - - /* TouchBook keyboard bus */ - omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, - ARRAY_SIZE(touchBook_i2c_boardinfo)); - - return 0; -} - -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); -} - -static struct ads7846_platform_data ads7846_config = { - .x_min = 100, - .y_min = 265, - .x_max = 3950, - .y_max = 3750, - .x_plate_ohms = 40, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .gpio_pendown = OMAP3_TS_GPIO, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, //(void *) 161, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - -static void __init omap3_beagle_init_irq(void) -{ - omap2_init_common_hw(mt46h32m32lf6_sdrc_params); - omap_init_irq(); - omap_gpio_init(); -} - -static struct gpio_led gpio_leds[] = { - { - .name = "beagleboard::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "beagleboard::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, - { - .name = "beagleboard::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 7, - .desc = "user", - .wakeup = 1, - }, - { - .code = KEY_POWER, - .gpio = 183, - .desc = "power", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -/* DSS */ - -static int beagle_enable_dvi(struct omap_display *display) -{ - if (display->hw_config.panel_reset_gpio != -1) - gpio_set_value(display->hw_config.panel_reset_gpio, 1); - - return 0; -} - -static void beagle_disable_dvi(struct omap_display *display) -{ - if (display->hw_config.panel_reset_gpio != -1) - gpio_set_value(display->hw_config.panel_reset_gpio, 0); -} - -static struct omap_dss_display_config beagle_display_data_dvi = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .panel_name = "panel-generic", - .u.dpi.data_lines = 24, - .panel_reset_gpio = 176, - .panel_enable = beagle_enable_dvi, - .panel_disable = beagle_disable_dvi, -}; - - -static int beagle_panel_enable_tv(struct omap_display *display) -{ -#define ENABLE_VDAC_DEDICATED 0x03 -#define ENABLE_VDAC_DEV_GRP 0x20 - - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - ENABLE_VDAC_DEDICATED, - TWL4030_VDAC_DEDICATED); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); - - return 0; -} - -static void beagle_panel_disable_tv(struct omap_display *display) -{ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, - TWL4030_VDAC_DEDICATED); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, - TWL4030_VDAC_DEV_GRP); -} - -static struct omap_dss_display_config beagle_display_data_tv = { - .type = OMAP_DISPLAY_TYPE_VENC, - .name = "tv", - .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .panel_enable = beagle_panel_enable_tv, - .panel_disable = beagle_panel_disable_tv, -}; - -static struct omap_dss_board_info beagle_dss_data = { - .num_displays = 2, - .displays = { - &beagle_display_data_dvi, - &beagle_display_data_tv, - } -}; - -static struct platform_device beagle_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &beagle_dss_data, - }, -}; - -static void __init beagle_display_init(void) -{ - int r; - - r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); - if (r < 0) { - printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_display_data_dvi.panel_reset_gpio, 0); -} - -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { - { OMAP_TAG_UART, &omap3_beagle_uart_config }, -}; - -static struct platform_device *omap3_beagle_devices[] __initdata = { - &beagle_dss_device, - &leds_gpio, - &keys_gpio, -}; - -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3beagle_nand_device) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - -static void __init omap3_mma7455l_init(void) -{ - int ret; - - ret = gpio_request(OMAP3_AC_GPIO, "mma7455l"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for mma7455l IRQ\n", OMAP3_AC_GPIO); - return; - } - - gpio_direction_input(OMAP3_AC_GPIO); -} - -static struct mma7455l_platform_data mma7455l_config = { - .calibration_x = -4, //26 for Beagleboard - .calibration_y = 28, //44 for Beagleboard - .calibration_z = -28, //26 for Beagleboard -}; - -static struct omap2_mcspi_device_config mma7455l_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_mma7455l_spi_board_info[] __initdata = { - { - .modalias = "mma7455l", - .bus_num = 3, - .chip_select = 0, - .max_speed_hz = 200000, - .irq = OMAP_GPIO_IRQ(OMAP3_AC_GPIO), - .controller_data = &mma7455l_mcspi_config, //(void *) 135, - .platform_data = &mma7455l_config, - } -}; - -static int touchbook_backlight_brightness = 50; -static struct omap_dm_timer *touchbook_backlight_pwm; - -static int touchbook_backlight_read(struct backlight_device *bd) -{ - return touchbook_backlight_brightness; -} - -static int touchbook_backlight_update(struct backlight_device *bd) -{ - int value = bd->props.brightness; - touchbook_backlight_brightness = value; - - /* Frequency calculation: - - For 200Hz PWM, you want to load -164 (=> -32768Hz / 200Hz). - - Minimum duty cycle for the backlight is 15%. - - You have (164*0.85) => ~140 levels of brightness. - */ - - /* Convert from 0-100 range to 0-140 range */ - value = (value * 14) / 10 / 2; - - /* For maximum brightness, just stop the timer... */ - if(value != bd->props.max_brightness) - { - omap_dm_timer_set_load(touchbook_backlight_pwm, 1, -164); - omap_dm_timer_set_match(touchbook_backlight_pwm, 1, -24 - value); - omap_dm_timer_write_counter(touchbook_backlight_pwm, -1); - //omap_dm_timer_stop(touchbook_backlight_pwm); - omap_dm_timer_start(touchbook_backlight_pwm); - } - else - omap_dm_timer_stop(touchbook_backlight_pwm); - - - return 0; -} - -static struct backlight_ops touchbook_backlight_properties = { - .get_brightness = touchbook_backlight_read, - .update_status = touchbook_backlight_update, -}; - -static void __init omap3_touchbook_backlight_init(void) -{ - static struct backlight_device *bd; - bd = backlight_device_register("touchbook", NULL, NULL, &touchbook_backlight_properties); - - if(bd) - { - touchbook_backlight_pwm = omap_dm_timer_request_specific(TB_BL_PWM_TIMER); - omap_dm_timer_enable(touchbook_backlight_pwm); - omap_dm_timer_set_source(touchbook_backlight_pwm, OMAP_TIMER_SRC_32_KHZ); - omap_dm_timer_set_pwm(touchbook_backlight_pwm, 1, 1, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); - - bd->props.max_brightness = 100; - bd->props.brightness = touchbook_backlight_brightness; - } - - touchbook_backlight_update(bd); -} - -static void omap3_touchbook_poweroff(void) -{ - int r; - - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { - printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); -} - -static void __init omap3_beagle_init(void) -{ - pm_power_off = omap3_touchbook_poweroff; - - omap3_beagle_i2c_init(); - platform_add_devices(omap3_beagle_devices, - ARRAY_SIZE(omap3_beagle_devices)); - omap_board_config = omap3_beagle_config; - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); - omap_serial_init(); - - omap_cfg_reg(J25_34XX_GPIO170); - - omap3beagle_flash_init(); - beagle_display_init(); - omap3_touchbook_backlight_init(); - - /* Touch Book */ - spi_register_board_info(omap3_ads7846_spi_board_info, ARRAY_SIZE(omap3_ads7846_spi_board_info)); - spi_register_board_info(omap3_mma7455l_spi_board_info, ARRAY_SIZE(omap3_mma7455l_spi_board_info)); - - omap3_ads7846_init(); - omap3_mma7455l_init(); - - usb_musb_init(); - usb_ehci_init(); -} - -static void __init omap3_beagle_map_io(void) -{ - omap2_set_globals_343x(); - omap2_map_common_io(); -} - -MACHINE_START(OMAP3_BEAGLE, "OMAP3 Touch Book") - /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, - .boot_params = 0x80000100, - .map_io = omap3_beagle_map_io, - .init_irq = omap3_beagle_init_irq, - .init_machine = omap3_beagle_init, - .timer = &omap_timer, -MACHINE_END diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/boot-trace-for-optimization.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/boot-trace-for-optimization.patch new file mode 100644 index 0000000000..fcb7ae480e --- /dev/null +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/boot-trace-for-optimization.patch @@ -0,0 +1,251 @@ +commit e9c4f51ad2b76ddbf90863c44085574197247ba3 +Author: Auke Kok <auke-jan.h.kok@intel.com> +Date: Tue Jan 27 11:26:00 2009 -0800 + + trace: tracer for sys_open() - sreadahead + + This tracer monitors regular file open() syscalls. This is a fast + and low-overhead alternative to strace, and does not allow or + require to be attached to every process. + + Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> + +diff --git a/fs/open.c b/fs/open.c +index a3a78ce..bd9eb9d 100644 +--- a/fs/open.c ++++ b/fs/open.c +@@ -30,6 +30,10 @@ + #include <linux/audit.h> + #include <linux/falloc.h> + ++#include <trace/fs.h> ++ ++DEFINE_TRACE(do_sys_open); ++ + int vfs_statfs(struct dentry *dentry, struct kstatfs *buf) + { + int retval = -ENODEV; +@@ -1039,6 +1043,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode) + } else { + fsnotify_open(f->f_path.dentry); + fd_install(fd, f); ++ trace_do_sys_open(f, flags, mode, fd); + } + } + putname(tmp); +diff --git a/include/trace/fs.h b/include/trace/fs.h +new file mode 100644 +index 0000000..870eec2 +--- /dev/null ++++ b/include/trace/fs.h +@@ -0,0 +1,11 @@ ++#ifndef _TRACE_FS_H ++#define _TRACE_FS_H ++ ++#include <linux/fs.h> ++#include <linux/tracepoint.h> ++ ++DECLARE_TRACE(do_sys_open, ++ TPPROTO(struct file *filp, int flags, int mode, long fd), ++ TPARGS(filp, flags, mode, fd)); ++ ++#endif +diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig +index e2a4ff6..d2a1ec1 100644 +--- a/kernel/trace/Kconfig ++++ b/kernel/trace/Kconfig +@@ -149,6 +149,15 @@ config CONTEXT_SWITCH_TRACER + This tracer gets called from the context switch and records + all switching of tasks. + ++config OPEN_TRACER ++ bool "Trace open() calls" ++ depends on DEBUG_KERNEL ++ select TRACING ++ select MARKERS ++ help ++ This tracer records open() syscalls. These calls are made when ++ files are accessed on disk. ++ + config BOOT_TRACER + bool "Trace boot initcalls" + depends on DEBUG_KERNEL +diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile +index 349d5a9..7f2a366 100644 +--- a/kernel/trace/Makefile ++++ b/kernel/trace/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_RING_BUFFER) += ring_buffer.o + + obj-$(CONFIG_TRACING) += trace.o + obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o ++obj-$(CONFIG_OPEN_TRACER) += trace_open.o + obj-$(CONFIG_SYSPROF_TRACER) += trace_sysprof.o + obj-$(CONFIG_FUNCTION_TRACER) += trace_functions.o + obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o +diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h +index 4d3d381..24c17d2 100644 +--- a/kernel/trace/trace.h ++++ b/kernel/trace/trace.h +@@ -30,6 +30,7 @@ enum trace_type { + TRACE_USER_STACK, + TRACE_HW_BRANCHES, + TRACE_POWER, ++ TRACE_OPEN, + + __TRACE_LAST_TYPE + }; +diff --git a/kernel/trace/trace_open.c b/kernel/trace/trace_open.c +new file mode 100644 +index 0000000..7153dfc +--- /dev/null ++++ b/kernel/trace/trace_open.c +@@ -0,0 +1,149 @@ ++/* ++ * trace open calls ++ * Copyright (C) 2009 Intel Corporation ++ * ++ * Based extensively on trace_sched_switch.c ++ * Copyright (C) 2007 Steven Rostedt <srostedt@redhat.com> ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/fs.h> ++#include <linux/debugfs.h> ++#include <linux/kallsyms.h> ++#include <linux/uaccess.h> ++#include <linux/ftrace.h> ++#include <trace/fs.h> ++ ++#include "trace.h" ++ ++ ++static struct trace_array *ctx_trace; ++static int __read_mostly open_trace_enabled; ++static atomic_t open_ref; ++ ++static void probe_do_sys_open(struct file *filp, int flags, int mode, long fd) ++{ ++ char *buf; ++ char *fname; ++ ++ if (!atomic_read(&open_ref)) ++ return; ++ ++ if (!open_trace_enabled) ++ return; ++ ++ buf = kzalloc(PAGE_SIZE, GFP_KERNEL); ++ if (!buf) ++ return; ++ ++ fname = d_path(&filp->f_path, buf, PAGE_SIZE); ++ if (IS_ERR(fname)) ++ goto out; ++ ++ ftrace_printk("%s: open(\"%s\", %d, %d) = %ld\n", ++ current->comm, fname, flags, mode, fd); ++ ++out: ++ kfree(buf); ++} ++ ++static void open_trace_reset(struct trace_array *tr) ++{ ++ tr->time_start = ftrace_now(tr->cpu); ++ tracing_reset_online_cpus(tr); ++} ++ ++static int open_trace_register(void) ++{ ++ int ret; ++ ++ ret = register_trace_do_sys_open(probe_do_sys_open); ++ if (ret) { ++ pr_info("open trace: Could not activate tracepoint" ++ " probe to do_open\n"); ++ } ++ ++ return ret; ++} ++ ++static void open_trace_unregister(void) ++{ ++ unregister_trace_do_sys_open(probe_do_sys_open); ++} ++ ++static void open_trace_start(void) ++{ ++ long ref; ++ ++ ref = atomic_inc_return(&open_ref); ++ if (ref == 1) ++ open_trace_register(); ++} ++ ++static void open_trace_stop(void) ++{ ++ long ref; ++ ++ ref = atomic_dec_and_test(&open_ref); ++ if (ref) ++ open_trace_unregister(); ++} ++ ++void open_trace_start_cmdline_record(void) ++{ ++ open_trace_start(); ++} ++ ++void open_trace_stop_cmdline_record(void) ++{ ++ open_trace_stop(); ++} ++ ++static void open_start_trace(struct trace_array *tr) ++{ ++ open_trace_reset(tr); ++ open_trace_start_cmdline_record(); ++ open_trace_enabled = 1; ++} ++ ++static void open_stop_trace(struct trace_array *tr) ++{ ++ open_trace_enabled = 0; ++ open_trace_stop_cmdline_record(); ++} ++ ++static int open_trace_init(struct trace_array *tr) ++{ ++ ctx_trace = tr; ++ ++ open_start_trace(tr); ++ return 0; ++} ++ ++static void reset_open_trace(struct trace_array *tr) ++{ ++ open_stop_trace(tr); ++} ++ ++static struct tracer open_trace __read_mostly = ++{ ++ .name = "open", ++ .init = open_trace_init, ++ .reset = reset_open_trace, ++}; ++ ++__init static int init_open_trace(void) ++{ ++ int ret = 0; ++ ++ if (atomic_read(&open_ref)) ++ ret = open_trace_register(); ++ if (ret) { ++ pr_info("error registering open trace\n"); ++ return ret; ++ } ++ return register_tracer(&open_trace); ++} ++device_initcall(init_open_trace); ++ diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig index c6fdd4a0a4..b1ab24b84f 100644 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig @@ -266,7 +266,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_VMSPLIT_3G=y -CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig.orig b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig.orig deleted file mode 100644 index 1aa7cf57ac..0000000000 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/defconfig.orig +++ /dev/null @@ -1,2701 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-omap1 -# Fri May 29 14:47:52 2009 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_OPROFILE_ARMV7=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -# CONFIG_AUDIT is not set - -# -# RCU Subsystem -# -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED_V2 is not set -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_ELF_CORE is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set -CONFIG_OPROFILE=y -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_FREEZER=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set - -# -# TI OMAP Implementations -# -CONFIG_ARCH_OMAP_OTG=y -# CONFIG_ARCH_OMAP1 is not set -# CONFIG_ARCH_OMAP2 is not set -CONFIG_ARCH_OMAP3=y - -# -# OMAP Feature Selections -# -# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set -# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set -CONFIG_OMAP_SMARTREFLEX=y -# CONFIG_OMAP_SMARTREFLEX_TESTING is not set -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_BOOT_TAG=y -CONFIG_OMAP_BOOT_REASON=y -# CONFIG_OMAP_COMPONENT_VERSION is not set -# CONFIG_OMAP_GPIO_SWITCH is not set -# CONFIG_OMAP_MUX is not set -CONFIG_OMAP_MCBSP=y -# CONFIG_OMAP_MBOX_FWK is not set -# CONFIG_OMAP_IOMMU is not set -# CONFIG_OMAP_MPU_TIMER is not set -CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_32K_TIMER_HZ=128 -CONFIG_OMAP_TICK_GPTIMER=12 -CONFIG_OMAP_DM_TIMER=y -# CONFIG_OMAP_LL_DEBUG_UART1 is not set -# CONFIG_OMAP_LL_DEBUG_UART2 is not set -CONFIG_OMAP_LL_DEBUG_UART3=y -CONFIG_ARCH_OMAP34XX=y -CONFIG_ARCH_OMAP3430=y - -# -# OMAP Board Type -# -# CONFIG_MACH_NOKIA_RX51 is not set -# CONFIG_MACH_OMAP_LDP is not set -# CONFIG_MACH_OMAP_3430SDP is not set -# CONFIG_MACH_OMAP3EVM is not set -CONFIG_MACH_OMAP3_BEAGLE=y -# CONFIG_MACH_OVERO is not set -# CONFIG_MACH_OMAP3_PANDORA is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_V7=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_ARM_THUMBEE=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_HAS_TLS_REG=y -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PREEMPT is not set -CONFIG_HZ=128 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_LEDS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE=" debug " -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y - -# -# CPU Power Management -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -# CONFIG_CPU_IDLE is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_ARM_ERRATUM_451034 is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_HAVE_AOUT=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=y - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_DEBUG=y -# CONFIG_PM_VERBOSE is not set -CONFIG_CAN_PM_TRACE=y -CONFIG_PM_SLEEP=y -CONFIG_SUSPEND=y -# CONFIG_PM_TEST_SUSPEND is not set -CONFIG_SUSPEND_FREEZER=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=y -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_LRO=m -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_TCP_CONG_ADVANCED=y -CONFIG_TCP_CONG_BIC=m -CONFIG_TCP_CONG_CUBIC=y -CONFIG_TCP_CONG_WESTWOOD=m -CONFIG_TCP_CONG_HTCP=m -CONFIG_TCP_CONG_HSTCP=m -CONFIG_TCP_CONG_HYBLA=m -CONFIG_TCP_CONG_VEGAS=m -CONFIG_TCP_CONG_SCALABLE=m -CONFIG_TCP_CONG_LP=m -CONFIG_TCP_CONG_VENO=m -CONFIG_TCP_CONG_YEAH=m -CONFIG_TCP_CONG_ILLINOIS=m -# CONFIG_DEFAULT_BIC is not set -CONFIG_DEFAULT_CUBIC=y -# CONFIG_DEFAULT_HTCP is not set -# CONFIG_DEFAULT_VEGAS is not set -# CONFIG_DEFAULT_WESTWOOD is not set -# CONFIG_DEFAULT_RENO is not set -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_IPV6_MROUTE=y -# CONFIG_IPV6_PIMSM_V2 is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -# CONFIG_NETFILTER_TPROXY is not set -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_VS=m -CONFIG_IP_VS_IPV6=y -CONFIG_IP_VS_DEBUG=y -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_IDLETIMER=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_DCCP=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PROTO_UDPLITE=m -CONFIG_NF_NAT_PROTO_SCTP=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m -# CONFIG_BRIDGE_NF_EBTABLES is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=y -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=y - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -CONFIG_TIPC=m -# CONFIG_TIPC_ADVANCED is not set -# CONFIG_TIPC_DEBUG is not set -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_BRIDGE=m -# CONFIG_NET_DSA is not set -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_IND=y -CONFIG_NET_SCH_FIFO=y -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -CONFIG_IRDA_ULTRA=y - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -CONFIG_IRDA_DEBUG=y - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -# CONFIG_ACT200L_DONGLE is not set -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_MCS_FIR=m -# CONFIG_OMAP_IR is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=y -CONFIG_BT_HCIBTSDIO=y -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=y -CONFIG_BT_HCIBPA10X=y -CONFIG_BT_HCIBFUSB=y -# CONFIG_BT_HCIBRF6150 is not set -# CONFIG_BT_HCIH4P is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_AF_RXRPC=m -# CONFIG_AF_RXRPC_DEBUG is not set -# CONFIG_RXKAD is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_CFG80211=y -# CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y -CONFIG_WIRELESS_OLD_REGULATORY=y -CONFIG_WIRELESS_EXT=y -CONFIG_WIRELESS_EXT_SYSFS=y -CONFIG_LIB80211=y -CONFIG_LIB80211_CRYPT_WEP=y -CONFIG_LIB80211_CRYPT_CCMP=y -CONFIG_LIB80211_CRYPT_TKIP=y -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT="pid" -# CONFIG_MAC80211_MESH is not set -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -# CONFIG_RFKILL is not set -CONFIG_NET_9P=m -# CONFIG_NET_9P_DEBUG is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_GPIO is not set -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y -# CONFIG_MTD_ALAUDA is not set -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR flash memory drivers -# -# CONFIG_MTD_LPDDR is not set - -# -# UBI - Unsorted block images -# -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -# CONFIG_MTD_UBI_GLUEBI is not set - -# -# UBI debugging options -# -# CONFIG_MTD_UBI_DEBUG is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -# CONFIG_BLK_DEV_XIP is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -# CONFIG_ATA_OVER_ETH is not set -CONFIG_MISC_DEVICES=y -# CONFIG_ICS932S401 is not set -# CONFIG_OMAP_STI is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_AT25 is not set -# CONFIG_EEPROM_LEGACY is not set -CONFIG_EEPROM_93CX6=y -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -# CONFIG_LIBFC is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_DELAY=m -# CONFIG_DM_UEVENT is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -# CONFIG_NET_ETHERNET is not set -CONFIG_MII=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -CONFIG_WLAN_80211=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_USB=y -# CONFIG_LIBERTAS_SDIO is not set -# CONFIG_LIBERTAS_DEBUG is not set -# CONFIG_LIBERTAS_THINFIRM is not set -CONFIG_USB_ZD1201=y -CONFIG_USB_NET_RNDIS_WLAN=y -CONFIG_RTL8187=y -# CONFIG_MAC80211_HWSIM is not set -CONFIG_P54_COMMON=y -CONFIG_P54_USB=y -# CONFIG_IWLWIFI_LEDS is not set -CONFIG_HOSTAP=y -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_B43=y -CONFIG_B43_LEDS=y -# CONFIG_B43_DEBUG is not set -# CONFIG_B43LEGACY is not set -CONFIG_ZD1211RW=y -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_RT2X00=y -CONFIG_RT2500USB=y -CONFIG_RT73USB=y -CONFIG_RT2X00_LIB_USB=y -CONFIG_RT2X00_LIB=y -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set - -# -# WiMAX Wireless Broadband devices -# -# CONFIG_WIMAX_I2400M_USB is not set -# CONFIG_WIMAX_I2400M_SDIO is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=y -CONFIG_USB_KAWETH=y -CONFIG_USB_PEGASUS=y -CONFIG_USB_RTL8150=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_AX8817X=y -CONFIG_USB_NET_CDCETHER=y -CONFIG_USB_NET_DM9601=y -CONFIG_USB_NET_SMSC95XX=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_NET1080=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_MCS7830=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_NET_CDC_SUBSET=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=y -# CONFIG_WAN is not set -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_TCP is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -# CONFIG_PPPOATM is not set -CONFIG_PPPOL2TP=m -# CONFIG_SLIP is not set -CONFIG_SLHC=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NETPOLL_TRAP=y -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=y -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_TWL4030 is not set -# CONFIG_KEYBOARD_LM8323 is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_ELANTECH is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INPUT_CM109 is not set -CONFIG_INPUT_TWL4030_PWRBUTTON=y -CONFIG_INPUT_UINPUT=y - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_GPIO is not set -# CONFIG_I2C_OCORES is not set -CONFIG_I2C_OMAP=y -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -CONFIG_TWL4030_MADC=m -CONFIG_TWL4030_POWEROFF=y -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_TSL2563 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_GPIO is not set -# CONFIG_SPI_OMAP24XX is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_TSC210X is not set -# CONFIG_SPI_TSC2301 is not set -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y - -# -# Memory mapped GPIO expanders: -# - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX732X is not set -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -CONFIG_GPIO_TWL4030=y - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set -CONFIG_POWER_SUPPLY=m -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PDA_POWER is not set -# CONFIG_BATTERY_DS2760 is not set -# CONFIG_TWL4030_BCI_BATTERY is not set -# CONFIG_BATTERY_BQ27x00 is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADCXX is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1111 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_SENSORS_TSC210X is not set -CONFIG_SENSORS_OMAP34XX=y -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_THERMAL=y -CONFIG_THERMAL_HWMON=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_OMAP_WATCHDOG=y - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -CONFIG_SSB=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TPS65010 is not set -CONFIG_TWL4030_CORE=y -# CONFIG_TWL4030_POWER is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2_COMMON=m -CONFIG_VIDEO_ALLOW_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -CONFIG_MEDIA_ATTACH=y -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_V4L1=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -CONFIG_VIDEO_IR_I2C=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_CX25840=m -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_VIVI=m -# CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_VIDEO_AU0828 is not set -# CONFIG_VIDEO_OMAP3 is not set -# CONFIG_SOC_CAMERA is not set -CONFIG_V4L_USB_DRIVERS=y -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_USBVIDEO=m -CONFIG_USB_VICAM=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_QUICKCAM_MESSENGER=m -CONFIG_USB_ET61X251=m -CONFIG_VIDEO_OVCAMCHIP=m -CONFIG_USB_W9968CF=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -CONFIG_USB_ZC0301=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_RADIO_ADAPTERS=y -# CONFIG_USB_DSBR is not set -# CONFIG_USB_SI470X is not set -# CONFIG_USB_MR800 is not set -# CONFIG_RADIO_TEA5764 is not set -CONFIG_DVB_DYNAMIC_MINORS=y -CONFIG_DVB_CAPTURE_DRIVERS=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Supported USB Adapters -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_SIANO_SMS1XXX=m -CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y - -# -# Supported FlexCopII (B2C2) Adapters -# -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_SI21XX=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRX397XD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3304=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_LNBP21=m -# CONFIG_DVB_ISL6405 is not set -CONFIG_DVB_ISL6421=m -CONFIG_DVB_LGS8GL5=m - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -CONFIG_DVB_AF9013=m -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_OMAP2_DSS=y -CONFIG_OMAP2_DSS_VRAM_SIZE=14 -CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y -# CONFIG_OMAP2_DSS_RFBI is not set -CONFIG_OMAP2_DSS_VENC=y -# CONFIG_OMAP2_DSS_SDI is not set -CONFIG_OMAP2_DSS_DSI=y -CONFIG_OMAP2_DSS_USE_DSI_PLL=y -# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set -CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1 - -# -# OMAP2/3 Display Device Drivers -# -CONFIG_PANEL_GENERIC=y -CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=m -# CONFIG_PANEL_SHARP_LS037V7DW01 is not set -# CONFIG_PANEL_N800 is not set -# CONFIG_CTRL_BLIZZARD is not set -CONFIG_FB_OMAP2=y -CONFIG_FB_OMAP2_DEBUG_SUPPORT=y -# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set -CONFIG_FB_OMAP2_NUM_FBS=3 -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=y -CONFIG_SND_RAWMIDI=y -CONFIG_SND_SEQUENCER=m -# CONFIG_SND_SEQ_DUMMY is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_VIRMIDI is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_ARM is not set -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_MCBSP=y -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y -CONFIG_SND_SOC_I2C_AND_SPI=y -# CONFIG_SND_SOC_ALL_CODECS is not set -CONFIG_SND_SOC_TWL4030=y -# CONFIG_SOUND_PRIME is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -CONFIG_HID_DEBUG=y -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_GREENASIA_FF=y -CONFIG_HID_TOPSEED=y -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_SUSPEND=y -CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_OMAP_EHCI_PHY_MODE=y -# CONFIG_OMAP_EHCI_TLL_MODE is not set -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_OXU210HP_HCD=y -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_U132_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_HWA_HCD is not set -CONFIG_USB_MUSB_HDRC=y -CONFIG_USB_MUSB_SOC=y - -# -# OMAP 343x high speed USB support -# -# CONFIG_USB_MUSB_HOST is not set -# CONFIG_USB_MUSB_PERIPHERAL is not set -CONFIG_USB_MUSB_OTG=y -CONFIG_USB_GADGET_MUSB_HDRC=y -CONFIG_USB_MUSB_HDRC_HCD=y -# CONFIG_MUSB_PIO_ONLY is not set -CONFIG_USB_INVENTRA_DMA=y -# CONFIG_USB_TI_CPPI_DMA is not set -# CONFIG_USB_MUSB_DEBUG is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MOTOROLA=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_SIEMENS_MPI=m -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_BERRY_CHARGE=m -CONFIG_USB_LED=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGET=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETMOTORCONTROL=m -CONFIG_USB_PHIDGETSERVO=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -# CONFIG_USB_APPLEDISPLAY is not set -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -# CONFIG_USB_IOWARRIOR is not set -CONFIG_USB_TEST=m -# CONFIG_USB_ISIGHTFW is not set -CONFIG_USB_VST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_ATMEL_USBA is not set -# CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_IMX is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_AMD5536UDC is not set -# CONFIG_USB_GADGET_FSL_QE is not set -# CONFIG_USB_GADGET_CI13XXX is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -CONFIG_USB_ZERO=m -CONFIG_USB_ZERO_HNPTEST=y -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -# CONFIG_USB_FILE_STORAGE_TEST is not set -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_USB_G_PRINTER=m -CONFIG_USB_CDC_COMPOSITE=m - -# -# OTG and related infrastructure -# -CONFIG_USB_OTG_UTILS=y -CONFIG_USB_GPIO_VBUS=y -# CONFIG_ISP1301_OMAP is not set -CONFIG_TWL4030_USB=y -# CONFIG_NOP_USB_XCEIV is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_UNSAFE_RESUME=y - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=y -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -# CONFIG_MMC_SDHCI is not set -CONFIG_MMC_OMAP_HS=y -CONFIG_MMC_SPI=m -# CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_OMAP_DEBUG is not set -CONFIG_LEDS_OMAP=y -# CONFIG_LEDS_OMAP_PWM is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_PCA955X is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -CONFIG_RTC_DRV_TWL4030=y -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_DMADEVICES is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -CONFIG_REGULATOR_TWL4030=y -CONFIG_UIO=m -CONFIG_UIO_PDRV=m -CONFIG_UIO_PDRV_GENIRQ=m -# CONFIG_UIO_SMX is not set -# CONFIG_UIO_SERCOS3 is not set -CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set -# CONFIG_MEILHAUS is not set -# CONFIG_USB_IP_COMMON is not set -CONFIG_W35UND=m -CONFIG_PRISM2_USB=m -# CONFIG_ECHO is not set -CONFIG_USB_ATMEL=m -# CONFIG_AGNX is not set -CONFIG_OTUS=m -# CONFIG_COMEDI is not set -# CONFIG_ASUS_OLED is not set -# CONFIG_INPUT_MIMIO is not set -# CONFIG_TRANZPORT is not set - -# -# Android -# -CONFIG_ANDROID=y -CONFIG_ANDROID_BINDER_IPC=y -CONFIG_ANDROID_LOGGER=m -CONFIG_ANDROID_RAM_CONSOLE=y -CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y -# CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION is not set -# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set -CONFIG_ANDROID_TIMED_GPIO=m -CONFIG_ANDROID_LOW_MEMORY_KILLER=y - -# -# CBUS support -# -# CONFIG_CBUS is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set -CONFIG_EXT4_FS_XATTR=y -# CONFIG_EXT4_FS_POSIX_ACL is not set -# CONFIG_EXT4_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=m -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -# CONFIG_REISERFS_FS_POSIX_ACL is not set -# CONFIG_REISERFS_FS_SECURITY is not set -CONFIG_JFS_FS=m -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=m -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -CONFIG_OCFS2_FS_STATS=y -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_FS_POSIX_ACL is not set -CONFIG_BTRFS_FS=m -# CONFIG_BTRFS_FS_POSIX_ACL is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_QUOTA=y -# CONFIG_QUOTA_NETLINK_INTERFACE is not set -CONFIG_PRINT_QUOTA_WARNING=y -CONFIG_QUOTA_TREE=y -# CONFIG_QFMT_V1 is not set -CONFIG_QFMT_V2=y -CONFIG_QUOTACTL=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -# CONFIG_ECRYPT_FS is not set -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RTIME=y -CONFIG_JFFS2_RUBIN=y -# CONFIG_JFFS2_CMODE_NONE is not set -# CONFIG_JFFS2_CMODE_PRIORITY is not set -# CONFIG_JFFS2_CMODE_SIZE is not set -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_UBIFS_FS_DEBUG is not set -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=y -# CONFIG_SQUASHFS_EMBEDDED is not set -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V2_ACL=y -CONFIG_NFSD_V3=y -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_ACL_SUPPORT=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_UPCALL is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -CONFIG_CIFS_EXPERIMENTAL=y -# CONFIG_CIFS_DFS_UPCALL is not set -CONFIG_NCP_FS=m -# CONFIG_NCPFS_PACKET_SIGNING is not set -# CONFIG_NCPFS_IOCTL_LOCKING is not set -# CONFIG_NCPFS_STRONG is not set -# CONFIG_NCPFS_NFS_NS is not set -# CONFIG_NCPFS_OS2_NS is not set -# CONFIG_NCPFS_SMALLDOS is not set -# CONFIG_NCPFS_NLS is not set -# CONFIG_NCPFS_EXTRAS is not set -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -CONFIG_9P_FS=m - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set - -# -# Kernel hacking -# -CONFIG_PRINTK_TIME=y -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_RING_BUFFER=y -CONFIG_TRACING=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_ERRORS is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_LL is not set - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_XOR_BLOCKS=m -CONFIG_ASYNC_CORE=m -CONFIG_ASYNC_MEMCPY=m -CONFIG_ASYNC_XOR=m -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=m -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_TEST=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_SEQIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_CTS=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XTS=m - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_HW=y - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC32=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/ehci.patch b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/ehci.patch index 5a8c84471b..89ab133fa2 100644 --- a/recipes/linux/linux-omap-2.6.29/omap3-touchbook/ehci.patch +++ b/recipes/linux/linux-omap-2.6.29/omap3-touchbook/ehci.patch @@ -1,26 +1,3 @@ -Index: git/arch/arm/mach-omap2/board-omap3beagle.c -=================================================================== ---- git.orig/arch/arm/mach-omap2/board-omap3beagle.c -+++ git/arch/arm/mach-omap2/board-omap3beagle.c -@@ -154,6 +154,7 @@ static int beagle_twl_gpio_setup(struct - * power switch and overcurrent detect - */ - -+#if 0 /* TODO: This needs to be modified to not rely on u-boot */ - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - -@@ -163,7 +164,7 @@ static int beagle_twl_gpio_setup(struct - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -- -+#endif - return 0; - } - -Index: git/arch/arm/mach-omap2/usb-ehci.c -=================================================================== --- git.orig/arch/arm/mach-omap2/usb-ehci.c +++ git/arch/arm/mach-omap2/usb-ehci.c @@ -147,9 +147,11 @@ static void setup_ehci_io_mux(void) @@ -43,7 +20,7 @@ Index: git/drivers/usb/host/ehci-omap.c * to get the PHY state machine in working state */ #define EXTERNAL_PHY_RESET -+#ifdef CONFIG_MACH_OMAP3_BEAGLE ++#ifdef CONFIG_MACH_OMAP3_TOUCHBOOK +#define EXT_PHY_RESET_GPIO_PORT2 (147) +#else #define EXT_PHY_RESET_GPIO_PORT1 (57) @@ -59,7 +36,7 @@ Index: git/drivers/usb/host/ehci-omap.c * Use the VBUS from Port1 to power VBUS of Port2 externally * So use Port2 as the working ULPI port */ -+#ifndef CONFIG_MACH_OMAP3_BEAGLE ++#ifndef CONFIG_MACH_OMAP3_TOUCHBOOK #define VBUS_INTERNAL_CHARGEPUMP_HACK +#endif @@ -69,7 +46,7 @@ Index: git/drivers/usb/host/ehci-omap.c #ifdef EXTERNAL_PHY_RESET /* Refer: ISSUE1 */ -+#ifndef CONFIG_MACH_OMAP3_BEAGLE ++#ifndef CONFIG_MACH_OMAP3_TOUCHBOOK gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); +#endif @@ -113,7 +90,7 @@ Index: git/drivers/usb/host/ehci-omap.c * Hold the PHY in RESET for enough time till PHY is settled and ready */ udelay(EXT_PHY_RESET_DELAY); -+#ifndef CONFIG_MACH_OMAP3_BEAGLE ++#ifndef CONFIG_MACH_OMAP3_TOUCHBOOK gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); +#endif gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); @@ -123,7 +100,7 @@ Index: git/drivers/usb/host/ehci-omap.c #ifdef EXTERNAL_PHY_RESET -+#ifndef CONFIG_MACH_OMAP3_BEAGLE ++#ifndef CONFIG_MACH_OMAP3_TOUCHBOOK gpio_free(EXT_PHY_RESET_GPIO_PORT1); +#endif gpio_free(EXT_PHY_RESET_GPIO_PORT2); diff --git a/recipes/linux/linux-omap_2.6.29.bb b/recipes/linux/linux-omap_2.6.29.bb index 8ded1a31f8..465d5adc00 100644 --- a/recipes/linux/linux-omap_2.6.29.bb +++ b/recipes/linux/linux-omap_2.6.29.bb @@ -217,7 +217,7 @@ SRC_URI_append_omap3evm = " \ S = "${WORKDIR}/git" do_configure_prepend_omap3-touchbook() { - cp ${WORKDIR}/board-*.c ${S}/arch/arm/mach-omap2 + cp ${WORKDIR}/board-omap3touchbook.c ${S}/arch/arm/mach-omap2 } do_install_append() { |