summaryrefslogtreecommitdiff
path: root/recipes
diff options
context:
space:
mode:
Diffstat (limited to 'recipes')
-rw-r--r--recipes/linux/linux-2.6.29/boc01/boc02.dts344
1 files changed, 344 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.29/boc01/boc02.dts b/recipes/linux/linux-2.6.29/boc01/boc02.dts
new file mode 100644
index 0000000000..fb0b5fb0a5
--- /dev/null
+++ b/recipes/linux/linux-2.6.29/boc01/boc02.dts
@@ -0,0 +1,344 @@
+/*
+ * Bolloré telecom CPE v01 Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ * Copyright 2008, 2009 Bolloré telecom.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8313ERDB";
+ compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8313@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <16384>;
+ i-cache-size = <16384>;
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>; // 128MB at 0
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // CS0 and CS1 are swapped when
+ // booting from nand, but the
+ // addresses are the same.
+ ranges = <0x0 0x0 0xfe000000 0x00800000
+ 0x1 0x0 0xe2800000 0x00008000
+ 0x2 0x0 0xf0000000 0x00020000
+ 0x3 0x0 0xfa000000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x2000>;
+
+ kernel@0 {
+ reg = <0x0 0x400000>;
+ read-only;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x4000000>;
+ };
+
+ appli@4400000 {
+ reg = <0x4400000 0x3c00000>;
+ };
+ };
+ };
+
+ soc8313@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xe0000000 0x00100000>;
+ reg = <0xe0000000 0x00000200>;
+ bus-frequency = <0>;
+
+ wdt@200 {
+ device_type = "watchdog";
+ compatible = "mpc83xx_wdt";
+ reg = <0x200 0x100>;
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x03000000>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <14 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ rtc@6f {
+ compatible = "isl12024";
+ reg = <0x6f>;
+ };
+ dtt@49 {
+ compatible = "national,lm73";
+ reg = <0x49>;
+ };
+ at24@50 {
+ compatible = "at24,24c32";
+ reg = <0x50>;
+ };
+ at24@57 {
+ compatible = "at24,isl12024";
+ reg = <0x57>;
+ };
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec2.2", "fsl,sec2.1",
+ "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ fsl,num-channels = <1>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x4c>;
+ fsl,descriptor-types-mask = <0x0122003f>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <15 0x8>;
+ interrupt-parent = <&ipic>;
+ dfsrr;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x7000 0x1000>;
+ interrupts = <16 0x8>;
+ interrupt-parent = <&ipic>;
+ mode = "cpu";
+ };
+
+ /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+ usb@23000 {
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&ipic>;
+ interrupts = <38 0x8>;
+ phy_type = "utmi_wide";
+ sleep = <&pmc 0x00300000>;
+ };
+
+ enet1: ethernet@25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 0x8 36 0x8 37 0x8>;
+ interrupt-parent = <&ipic>;
+ fixed-link = <1 1 100 0 0>;
+ sleep = <&pmc 0x10000000>;
+ fsl,magic-packet;
+ };
+
+ serial0: serial@4600 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <10 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ /* IPIC
+ * interrupts cell = <intr #, sense>
+ * sense values match linux IORESOURCE_IRQ_* defines:
+ * sense == 8: Level, low assertion
+ * sense == 2: Edge, high-to-low change
+ */
+ ipic: pic@700 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x700 0x100>;
+ device_type = "ipic";
+ };
+
+ pmc: power@b00 {
+ compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 8>;
+ interrupt-parent = <&ipic>;
+ fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+ /* Remove this (or change to "okay") if you have
+ * a REVA3 or later board, if you apply one of the
+ * workarounds listed in section 8.5 of the board
+ * manual, or if you are adapting this device tree
+ * to a different board.
+ */
+ status = "okay";
+ };
+
+ gtm1: timer@500 {
+ compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+ reg = <0x500 0x100>;
+ interrupts = <72 8 78 8 84 8 90 8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ timer@600 {
+ compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+ reg = <0x600 0x100>;
+ interrupts = <91 8 79 8 85 8 73 8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ wakeup@27000 {
+ compatible = "fsl,wakeup-it", "fsl,gtm";
+ reg = <0x27000 0x100>;
+ interrupts = <17 8 19 8>;
+ interrupt-parent = <&ipic>;
+ };
+
+ };
+
+ sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00010000>;
+ ranges;
+
+ pci0: pci@e0008500 {
+ cell-index = <1>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0F - PCI slot */
+ 0x7800 0x0 0x0 0x1 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 48 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 48 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100>;
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
+
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+ reg = <0xe00082a8 4>;
+ ranges = <0 0xe0008100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+
+ dma-channel@0 {
+ compatible = "fsl,mpc8313-dma-channel",
+ "fsl,elo-dma-channel";
+ reg = <0 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <0>;
+ };
+
+ dma-channel@80 {
+ compatible = "fsl,mpc8313-dma-channel",
+ "fsl,elo-dma-channel";
+ reg = <0x80 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <1>;
+ };
+
+ dma-channel@100 {
+ compatible = "fsl,mpc8313-dma-channel",
+ "fsl,elo-dma-channel";
+ reg = <0x100 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <2>;
+ };
+
+ dma-channel@180 {
+ compatible = "fsl,mpc8313-dma-channel",
+ "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
+ cell-index = <3>;
+ };
+ };
+ };
+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 04:50:13 +0000