diff options
Diffstat (limited to 'recipes/wpa-supplicant/files/defconfig-0.6.0-gnutls')
| -rw-r--r-- | recipes/wpa-supplicant/files/defconfig-0.6.0-gnutls | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/recipes/wpa-supplicant/files/defconfig-0.6.0-gnutls b/recipes/wpa-supplicant/files/defconfig-0.6.0-gnutls new file mode 100644 index 0000000000..e907271547 --- /dev/null +++ b/recipes/wpa-supplicant/files/defconfig-0.6.0-gnutls @@ -0,0 +1,180 @@ +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS = $(TARGET_CFLAGS) -I../src/hostapd -I../src/utils -I../src/driver/modules -I../src/rsn_supp -I../src/common -I../src/crypto -I../src -I./ -Wall -MMD +LIBS = $(TARGET_LDFLAGS) + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=y +#CFLAGS += -I../../hcf -I../../include -I../../include/hcf + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y +#CFLAGS += -I../madwifi/wpa + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y +#CFLAGS += -I/opt/WRT54GS/release/src/include + +# Driver interface for Intel ipw2100 driver +#CONFIG_DRIVER_IPW2100=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# none = Empty template +#CONFIG_L2_PACKET=linux + +# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection +#CONFIG_STAKEY=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# none = Empty template +CONFIG_TLS=gnutls + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +CONFIG_GNUTLS_EXTRA=y + +CONFIG_CTRL_IFACE_DBUS=y |