diff options
Diffstat (limited to 'recipes/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts')
| -rw-r--r-- | recipes/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/recipes/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts b/recipes/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts new file mode 100644 index 0000000000..3e498297fc --- /dev/null +++ b/recipes/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts @@ -0,0 +1,47 @@ +# Wireless LAN adapter configuration +# +# Theory of operation : +# +# The script attempts to match a block of settings to the specific wireless +# card inserted, the *first* block matching the card is used. +# The address format is "scheme,socket,instance,hwaddr", with * as a wildcard. +# 'scheme' is the pcmcia scheme (set via 'cardctl scheme XXX'). +# 'hwaddr' is the unique MAC address identifier of the wireless card. +# The MAC address is usually printed on the card, or can be found via ifconfig. +# Some examples here use only half of the MAC address with a wildcard to +# match a whole family of cards... +# +# All the Wireless specific configuration is done through the Wireless +# Extensions, so we will just call 'iwconfig' with the right parameters +# defined below. +# Of course, you need to have iwconfig installled on your system. +# To download iwconfig, or for more info on Wireless Extensions : +# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html +# +# Note : you don't need to fill all parameters, leave them blank, in most +# cases the driver will initialise itself with sane defaults values or +# automatically figure out the value... And no drivers do support all +# possible settings... +# +# If you make any mistakes, you'll get a cryptic message in the system +# log. You'll need to figure out on your own which parameter was wrong: +# cardmgr[310]: executing: './network start wvlan0' +# cardmgr[310]: + SIOCSIWMODE: Invalid argument +# I've tried to give more troubleshooting help at : +# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html#debug +# In case of doubts, just check "/etc/pcmcia/wireless" for the gory details... +# +# Note also that this script will work only with the original Pcmcia scripts, +# and not with the default Red Hat scripts. Send a bug report to Red Hat ;-) +# +# Finally, send comments and flames to me, Jean Tourrilhes <jt@hpl.hp.com> +# + +case "$ADDRESS" in +*,*,*,*) + INFO="Default Config" + ESSID=any + MODE=Managed + RATE=auto + ;; +esac |