diff options
Diffstat (limited to 'recipes/openldap/openldap_2.4.23.bb')
| -rw-r--r-- | recipes/openldap/openldap_2.4.23.bb | 267 |
1 files changed, 267 insertions, 0 deletions
diff --git a/recipes/openldap/openldap_2.4.23.bb b/recipes/openldap/openldap_2.4.23.bb new file mode 100644 index 0000000000..9ad86c8f59 --- /dev/null +++ b/recipes/openldap/openldap_2.4.23.bb @@ -0,0 +1,267 @@ +# OpenLDAP, a license free (see http://www.OpenLDAP.org/license.html) +# +DESCRIPTION = "OpenLDAP Software is an open source implementation of the Lightweight Directory Access Protocol." +HOMEPAGE = "http://www.OpenLDAP.org/license.html" +PRIORITY = "optional" +# The OpenLDAP Public License - see the HOMEPAGE - defines +# the license. www.openldap.org claims this is Open Source +# (see http://www.openldap.org), the license appears to be +# basically BSD. opensource.org does not record this license +# at present (so it is apparently not OSI certified). +LICENSE = "OpenLDAP" +SECTION = "libs" + +LDAP_VER = "${@'.'.join(bb.data.getVar('PV',d,1).split('.')[0:2])}" + +SRC_URI = "ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/${P}.tgz" +SRC_URI += "file://openldap-m4-pthread.patch" +SRC_URI += "file://initscript" +SRC_URI[md5sum] = "90150b8c0d0192e10b30157e68844ddf" +SRC_URI[sha256sum] = "5a5ede91d5e8ab3c7f637620aa29a3b96eb34318a8b26c8eef2d2c789fc055e3" + +# The build tries to run a host executable, this fails. The patch +# causes the executable and its data to be installed instead of +# the output - ucgendat must be run after the ipkg install! +#SRC_URI += "file://ucgendat.patch" +# The original top.mk used INSTALL, not INSTALL_STRIP_PROGRAM when +# installing .so and executables, this fails in cross compilation +# environments +SRC_URI += "file://install-strip.patch" + +inherit autotools + +# OPTIONS +# The following two variables can be set in a distro or local.conf +# to switch features on. Each feature foo defines OPENLDAP_OPTION_foo +# and OPENLDAP_DEPENDS_foo in this file - to include feature foo add +# the two variables into the setting of the options below (please use +# += because that means this can be done in *both* distro.conf and +# local.conf! +OPENLDAP_OPTIONS ?= "" +OPENLDAP_DEPENDS ?= "" + +# CV SETTINGS +# Required to work round AC_FUNC_MEMCMP which gets the wrong answer +# when cross compiling (should be in site?) +EXTRA_OECONF += "ac_cv_func_memcmp_working=yes" + +# CONFIG DEFINITIONS +# The following is necessary because it cannot be determined for a +# cross compile automagically. Select should yield fine on all OE +# systems... +EXTRA_OECONF += "--with-yielding-select=yes" +# Shared libraries are nice... +EXTRA_OECONF += "--enable-dynamic" +# +# Disable TLS to remove the need for openssl/libcrypto +OPENLDAP_OPTION_tls ?= "--with-tls" +# set the following to "openssl" to build tls support +OPENLDAP_DEPENDS_tls ?= "gnutls" +EXTRA_OECONF += "${OPENLDAP_OPTION_tls}" +DEPENDS += "${OPENLDAP_DEPENDS_tls}" +# +# Disable Cyrus SASL, which may or may not be working at present... +OPENLDAP_OPTION_sasl ?= "--without-cyrus-sasl" +# set the following to "cyrus-sasl" to build SASL support +OPENLDAP_DEPENDS_sasl ?= "" +EXTRA_OECONF += "${OPENLDAP_OPTION_sasl}" +DEPENDS += "${OPENLDAP_DEPENDS_sasl}" + +# SLAPD options +# +# UNIX crypt(3) passwd support: +EXTRA_OECONF += "--enable-crypt" +# +# Enable dynamic module loading. If this is *disabled* the +# dependency on libtool is removed (to disable set the following +# to variables to "" in a .conf file). +OPENLDAP_OPTION_modules += "lt_cv_dlopen_self=yes --enable-modules" +OPENLDAP_DEPENDS_modules += "libtool" +EXTRA_OECONF += " ${OPENLDAP_OPTION_modules}" +DEPENDS += "${OPENLDAP_DEPENDS_modules}" + +# SLAPD BACKEND +# +# The backend must be set by the configuration. This controls the +# required database, the default database, bdb, is turned off but +# can be turned back on again and it *is* below! The monitor backend +# is also disabled. If you try to change the backends but fail to +# enable a single one the build will fail in an obvious way. +# +EXTRA_OECONF += "--disable-bdb --disable-hdb --disable-monitor" +# +# Backends="bdb dnssrv hdb ldap ldbm meta monitor null passwd perl shell sql" +# +# Note that multiple backends can be built. The ldbm backend requires a +# build-time choice of database API. The bdb backend forces this to be +# DB4. To use the gdbm (or other) API the Berkely database module must +# be removed from the build. +md = "${libexecdir}/openldap" +# +#--enable-bdb enable Berkeley DB backend no|yes|mod yes +# The Berkely DB is the standard choice. This version of OpenLDAP requires +# the version 4 implementation or better. +# To disable this set all three of the following variables to <empty> in +# a .conf file (this will allow ldbm to be build with gdbm). +#OPENLDAP_OPTION_bdb ?= "--enable-bdb=mod" +OPENLDAP_DEPENDS_bdb ?= "db" +EXTRA_OECONF += "${OPENLDAP_OPTION_bdb}" +DEPENDS += "${OPENLDAP_DEPENDS_bdb}" +# +#--enable-dnssrv enable dnssrv backend no|yes|mod no +# This has no dependencies. +EXTRA_OECONF += "--enable-dnssrv=mod" +# +#--enable-hdb enable Hierarchical DB backend no|yes|mod no +# This forces ldbm to use Berkeley too, remove to use gdbm +#OPENLDAP_OPTION_hdb ?= "--enable-hdb=mod" +OPENLDAP_DEPENDS_hdb ?= "db" +OPENLDAP_PACKAGE_hdb ?= "${PN}-backend-hdb" +EXTRA_OECONF += "${OPENLDAP_OPTION_hdb}" +DEPENDS += "${OPENLDAP_DEPENDS_hdb}" +# +#--enable-ldap enable ldap backend no|yes|mod no +# This has no dependencies +EXTRA_OECONF += "--enable-ldap=mod" +# +#--enable-ldbm enable ldbm backend no|yes|mod no +# ldbm requires further specification of the underlying database API, because +# bdb is enabled above this must be set to berkeley, however the config +# defaults this correctly so --with-ldbm-api is *not* set. The build will +# fail if bdb is removed (above) but not database is built to provide the +# support for ldbm (because the 'DEPENDS_ldbm' is empty below.) +# +# So to use gdbm set: +OPENLDAP_OPTION_ldbm = "--enable-ldbm=mod --with-ldbm-api=gdbm" +OPENLDAP_DEPENDS_ldbm = gdbm +# And clear the bdb and hdb settings. +OPENLDAP_OPTION_ldbm ?= "--enable-ldbm=mod" +OPENLDAP_DEPENDS_ldbm ?= "" +EXTRA_OECONF += "${OPENLDAP_OPTION_ldbm}" +DEPENDS += "${OPENLDAP_DEPENDS_ldbm}" +# +#--enable-meta enable metadirectory backend no|yes|mod no +# No dependencies +EXTRA_OECONF += "--enable-meta=mod" +# +#--enable-monitor enable monitor backend no|yes|mod yes +EXTRA_OECONF += "--enable-monitor=mod" +# +#--enable-null enable null backend no|yes|mod no +EXTRA_OECONF += "--enable-null=mod" +# +#--enable-passwd enable passwd backend no|yes|mod no +EXTRA_OECONF += " --enable-passwd=mod" +# +#--enable-perl enable perl backend no|yes|mod no +# This requires a loadable perl dynamic library, if enabled without +# doing something appropriate (building perl?) the build will pick +# up the build machine perl - not good. +OPENLDAP_OPTION_perl ?= "--enable-perl=mod" +OPENLDAP_DEPENDS_perl ?= "perl" +#EXTRA_OECONF += "${OPENLDAP_OPTION_perl}" +#DEPENDS += "${OPENLDAP_DEPENDS_perl}" +# +#--enable-shell enable shell backend no|yes|mod no +EXTRA_OECONF += "--enable-shell=mod" +# +#--enable-sql enable sql backend no|yes|mod no +# sql requires some sql backend which provides sql.h, sqlite* provides +# sqlite.h (which may be compatible but hasn't been tried.) +OPENLDAP_OPTION_sql ?= "--enable-sql=mod" +OPENLDAP_DEPENDS_sql ?= "sql" +#EXTRA_OECONF += "${OPENLDAP_OPTION_sql}" +#DEPENDS += "${OPENLDAP_DEPENDS_sql}" +# +#--enable-dyngroup Dynamic Group overlay no|yes|mod no +# This is a demo, Proxy Cache defines init_module which conflicts with the +# same symbol in dyngroup +#EXTRA_OECONF += "--enable-dyngroup=mod" +# +#--enable-proxycache Proxy Cache overlay no|yes|mod no +EXTRA_OECONF += "--enable-proxycache=mod" +FILES_${PN}-overlay-proxycache = "${md}/pcache-*.so.*" +PACKAGES += "${PN}-overlay-proxycache" +# +# LOCAL OPTION OVERRIDES +# The distro/lcoal options must be added in *last* +EXTRA_OECONF += "${OPENLDAP_OPTIONS}" +DEPENDS += "${OPENLDAP_DEPENDS}" + +CPPFLAGS_append = " -D_GNU_SOURCE" + +do_configure() { + gnu-configize + oe_runconf +} + +#FIXME: this is a hack, at present an openldap build will pick up the header +# files from staging rather than the local ones (bad -I order), so remove +# the headers (from openldap-old.x) before compiling... +do_compile_prepend() { + ( cd ${STAGING_INCDIR} + rm -f ldap.h ldap_*.h + ) + ( cd ${STAGING_LIBDIR} + rm -f libldap* liblber* + ) +} + +LEAD_SONAME = "libldap-${LDAP_VER}.so.*" + +# The executables go in a separate package. This allows the +# installation of the libraries with no daemon support. +# Each module also has its own package - see above. +PACKAGES += "${PN}-slapd ${PN}-slurpd ${PN}-bin" + +# Package contents - shift most standard contents to -bin +FILES_${PN} = "${libdir}/lib*.so.* ${sysconfdir}/openldap/ldap.* ${localstatedir}/openldap-data" +FILES_${PN}-slapd = "${sysconfdir}/init.d ${libexecdir}/slapd ${sbindir} ${localstatedir}/run \ + ${sysconfdir}/openldap/slapd.* ${sysconfdir}/openldap/schema \ + ${sysconfdir}/openldap/DB_CONFIG.example" +FILES_${PN}-slurpd = "${libexecdir}/slurpd ${localstatedir}/openldap-slurp ${localstatedir}/run" +FILES_${PN}-bin = "${bindir}" +FILES_${PN}-dev = "${includedir} ${libdir}/lib*.so ${libdir}/*.la ${libdir}/*.a ${libexecdir}/openldap/*.a ${libexecdir}/openldap/*.la ${libexecdir}/openldap/*.so" +FILES_${PN}-dbg += "${libexecdir}/openldap/.debug" + +do_install_append() { + install -d ${D}${sysconfdir}/init.d + cat ${WORKDIR}/initscript > ${D}${sysconfdir}/init.d/openldap + chmod 755 ${D}${sysconfdir}/init.d/openldap + # This is duplicated in /etc/openldap and is for slapd + rm -f ${D}${localstatedir}/openldap-data/DB_CONFIG.example +} + +pkg_postinst_${PN}-slapd () { + if test -n "${D}"; then + D="-r $D" + fi + update-rc.d $D openldap defaults +} + +pkg_prerm_${PN}-slapd () { + if test -n "${D}"; then + D="-r $D" + fi + update-rc.d $D openldap remove +} + +PACKAGES_DYNAMIC = "openldap-backends openldap-backend-*" + +python populate_packages_prepend () { + backend_dir = bb.data.expand('${libexecdir}/openldap', d) + do_split_packages(d, backend_dir, 'back_([a-z]*)\-.*\.so\..*$', 'openldap-backend-%s', 'OpenLDAP %s backend', extra_depends='', allow_links=True) + + metapkg = "openldap-backends" + bb.data.setVar('ALLOW_EMPTY_' + metapkg, "1", d) + bb.data.setVar('FILES_' + metapkg, "", d) + metapkg_rdepends = [] + packages = bb.data.getVar('PACKAGES', d, 1).split() + for pkg in packages[1:]: + if pkg.count("openldap-backend-") and not pkg in metapkg_rdepends and not pkg.count("-dev") and not pkg.count("-dbg") and not pkg.count("static") and not pkg.count("locale"): + metapkg_rdepends.append(pkg) + bb.data.setVar('RDEPENDS_' + metapkg, ' '.join(metapkg_rdepends), d) + bb.data.setVar('DESCRIPTION_' + metapkg, 'OpenLDAP backends meta package', d) + packages.append(metapkg) + bb.data.setVar('PACKAGES', ' '.join(packages), d) +} |