summaryrefslogtreecommitdiff
path: root/recipes/net-snmp
diff options
context:
space:
mode:
Diffstat (limited to 'recipes/net-snmp')
-rwxr-xr-xrecipes/net-snmp/files/init63
-rw-r--r--recipes/net-snmp/files/mtx-1/snmpd.conf434
-rw-r--r--recipes/net-snmp/files/mtx-2/snmpd.conf434
-rw-r--r--recipes/net-snmp/files/snmpd.conf422
-rw-r--r--recipes/net-snmp/files/snmptrapd.conf18
-rw-r--r--recipes/net-snmp/files/uclibc-fix.patch11
-rw-r--r--recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch99
-rw-r--r--recipes/net-snmp/net-snmp.inc97
-rw-r--r--recipes/net-snmp/net-snmp_5.1.2.bb18
-rw-r--r--recipes/net-snmp/net-snmp_5.4.1.bb20
-rw-r--r--recipes/net-snmp/net-snmp_svn.bb27
11 files changed, 1643 insertions, 0 deletions
diff --git a/recipes/net-snmp/files/init b/recipes/net-snmp/files/init
new file mode 100755
index 0000000000..434b2fa3f2
--- /dev/null
+++ b/recipes/net-snmp/files/init
@@ -0,0 +1,63 @@
+#! /bin/sh
+# /etc/init.d/snmpd: start snmp daemon.
+
+test -x /usr/sbin/snmpd || exit 0
+test -x /usr/sbin/snmptrapd || exit 0
+
+# Defaults
+export MIBDIRS=/usr/share/snmp/mibs
+SNMPDRUN=yes
+SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
+TRAPDRUN=no
+TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid'
+
+# Cd to / before starting any daemons.
+cd /
+
+case "$1" in
+ start)
+ echo -n "Starting network management services:"
+ if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then
+ start-stop-daemon -S -x /usr/sbin/snmpd \
+ -- $SNMPDOPTS
+ echo -n " snmpd"
+ fi
+ if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then
+ start-stop-daemon -S -x /usr/sbin/snmptrapd \
+ -- $TRAPDOPTS
+ echo -n " snmptrapd"
+ fi
+ echo "."
+ ;;
+ stop)
+ echo -n "Stopping network management services:"
+ start-stop-daemon -K -x /usr/sbin/snmpd
+ echo -n " snmpd"
+ start-stop-daemon -K -x /usr/sbin/snmptrapd
+ echo -n " snmptrapd"
+ echo "."
+ ;;
+ restart|reload|force-reload)
+ echo -n "Restarting network management services:"
+ start-stop-daemon -K -x /usr/sbin/snmpd
+ start-stop-daemon -K -x /usr/sbin/snmptrapd
+ # Allow the daemons time to exit completely.
+ sleep 2
+ if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then
+ start-stop-daemon -S -x /usr/sbin/snmpd -- $SNMPDOPTS
+ echo -n " snmpd"
+ fi
+ if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then
+ # Allow snmpd time to start up.
+ sleep 1
+ start-stop-daemon -S -x /usr/sbin/snmptrapd -- $TRAPDOPTS
+ echo -n " snmptrapd"
+ fi
+ echo "."
+ ;;
+ *)
+ echo "Usage: /etc/init.d/snmpd {start|stop|restart|reload|force-reload}"
+ exit 1
+esac
+
+exit 0
diff --git a/recipes/net-snmp/files/mtx-1/snmpd.conf b/recipes/net-snmp/files/mtx-1/snmpd.conf
new file mode 100644
index 0000000000..9067f68d22
--- /dev/null
+++ b/recipes/net-snmp/files/mtx-1/snmpd.conf
@@ -0,0 +1,434 @@
+###############################################################################
+#
+# EXAMPLE.conf:
+# An example configuration file for configuring the ucd-snmp snmpd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example. If, however, you want
+# to use it, it should be placed in /etc/snmp/snmpd.conf.
+# When the snmpd agent starts up, this is where it will look for it.
+#
+# You might be interested in generating your own snmpd.conf file using
+# the "snmpconf" program (perl script) instead. It's a nice menu
+# based interface to writing well commented configuration files. Try it!
+#
+# Note: This file is automatically generated from EXAMPLE.conf.def.
+# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
+# configure & make, and then make sure you read the EXAMPLE.conf file
+# instead, as it will tailor itself to your configuration.
+
+# All lines beginning with a '#' are comments and are intended for you
+# to read. All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmpd.conf(5) manual page as well!
+#
+
+
+###############################################################################
+# Access Control
+###############################################################################
+
+# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
+# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
+# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
+
+# By far, the most common question I get about the agent is "why won't
+# it work?", when really it should be "how do I configure the agent to
+# allow me to access it?"
+#
+# By default, the agent responds to the "public" community for read
+# only access, if run out of the box without any configuration file in
+# place. The following examples show you other ways of configuring
+# the agent so that you can change the community names, and give
+# yourself write access as well.
+#
+# The following lines change the access permissions of the agent so
+# that the COMMUNITY string provides read-only access to your entire
+# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
+# localhost (127.0.0.1, not its real ipaddress).
+#
+# For more information, read the FAQ as well as the snmpd.conf(5)
+# manual page.
+
+####
+# First, map the community name (COMMUNITY) into a security name
+# (local and mynetwork, depending on where the request is coming
+# from):
+
+# sec.name source community
+#com2sec paranoid default public
+com2sec readonly default public
+#com2sec readwrite default private
+
+####
+# Second, map the security names into group names:
+
+# sec.model sec.name
+group MyROSystem v1 paranoid
+group MyROSystem v2c paranoid
+group MyROSystem usm paranoid
+group MyROGroup v1 readonly
+group MyROGroup v2c readonly
+group MyROGroup usm readonly
+group MyRWGroup v1 readwrite
+group MyRWGroup v2c readwrite
+group MyRWGroup usm readwrite
+
+####
+# Third, create a view for us to let the groups have rights to:
+
+# incl/excl subtree mask
+view all included .1 80
+view system included .iso.org.dod.internet.mgmt.mib-2.system
+
+####
+# Finally, grant the 2 groups access to the 1 view with different
+# write permissions:
+
+# context sec.model sec.level match read write notif
+access MyROSystem "" any noauth exact system none none
+access MyROGroup "" any noauth exact all none none
+access MyRWGroup "" any noauth exact all all none
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# System contact information
+#
+
+# It is also possible to set the sysContact and sysLocation system
+# variables through the snmpd.conf file. **PLEASE NOTE** that setting
+# the value of these objects here makes these objects READ-ONLY
+# (regardless of any access control settings). Any attempt to set the
+# value of an object whose value is given here will fail with an error
+# status of notWritable.
+
+syslocation Unknown (configure /etc/snmp/snmpd.local.conf)
+syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
+
+# Example output of snmpwalk:
+# % snmpwalk -v 1 -c public localhost system
+# system.sysDescr.0 = "SunOS name sun4c"
+# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
+# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
+# system.sysContact.0 = "Me <me@somewhere.org>"
+# system.sysName.0 = "name"
+# system.sysLocation.0 = "Right here, right now."
+# system.sysServices.0 = 72
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Process checks.
+#
+# The following are examples of how to use the agent to check for
+# processes running on the host. The syntax looks something like:
+#
+# proc NAME [MAX=0] [MIN=0]
+#
+# NAME: the name of the process to check for. It must match
+# exactly (ie, http will not find httpd processes).
+# MAX: the maximum number allowed to be running. Defaults to 0.
+# MIN: the minimum number to be running. Defaults to 0.
+
+#
+# Examples:
+#
+
+# Make sure mountd is running
+#proc mountd
+
+# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
+#proc ntalkd 4
+
+# Make sure at least one sendmail, but less than or equal to 10 are running.
+#proc sendmail 10 1
+
+# A snmpwalk of the prTable would look something like this:
+#
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
+# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
+# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
+# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
+# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
+# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
+# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
+# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
+# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
+#
+# Note that the errorFlag for mountd is set to 1 because one is not
+# running (in this case an rpc.mountd is, but thats not good enough),
+# and the ErrMessage tells you what's wrong. The configuration
+# imposed in the snmpd.conf file is also shown.
+#
+# Special Case: When the min and max numbers are both 0, it assumes
+# you want a max of infinity and a min of 1.
+#
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Executables/scripts
+#
+
+#
+# You can also have programs run by the agent that return a single
+# line of output and an exit code. Here are two examples.
+#
+# exec NAME PROGRAM [ARGS ...]
+#
+# NAME: A generic name.
+# PROGRAM: The program to run. Include the path!
+# ARGS: optional arguments to be passed to the program
+
+# a simple hello world
+#exec echotest /bin/echo hello world
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+#exec shelltest /bin/sh /tmp/shtest
+
+# Then,
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
+# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
+# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
+# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
+# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
+# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
+# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
+# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
+
+# Note that the second line of the /tmp/shtest shell script is cut
+# off. Also note that the exit status of 35 was returned.
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# disk checks
+#
+
+# The agent can check the amount of available disk space, and make
+# sure it is above a set limit.
+
+# disk PATH [MIN=DEFDISKMINIMUMSPACE]
+#
+# PATH: mount path to the disk in question.
+# MIN: Disks with space below this value will have the Mib's errorFlag set.
+# Default value = DEFDISKMINIMUMSPACE.
+
+# Check the / partition and make sure it contains at least 10 megs.
+
+#disk / 10000
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
+# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
+# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
+# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
+# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
+# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
+# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
+# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# load average checks
+#
+
+# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE]
+#
+# 1MAX: If the 1 minute load average is above this limit at query
+# time, the errorFlag will be set.
+# 5MAX: Similar, but for 5 min average.
+# 15MAX: Similar, but for 15 min average.
+
+# Check for loads:
+#load 12 14 14
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Extensible sections.
+#
+
+# This alleviates the multiple line output problem found in the
+# previous executable mib by placing each mib in its own mib table:
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
+# enterprises.ucdavis.50.1.1 = 1
+# enterprises.ucdavis.50.2.1 = "shelltest"
+# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.50.100.1 = 35
+# enterprises.ucdavis.50.101.1 = "hello world."
+# enterprises.ucdavis.50.101.2 = "hi there."
+# enterprises.ucdavis.50.102.1 = 0
+
+# Now the Output has grown to two lines, and we can see the 'hi
+# there.' output as the second line from our shell script.
+#
+# Note that you must alter the mib.txt file to be correct if you want
+# the .50.* outputs above to change to reasonable text descriptions.
+
+# Other ideas:
+#
+# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
+# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
+# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Pass through control.
+#
+
+# Usage:
+# pass MIBOID EXEC-COMMAND
+#
+# This will pass total control of the mib underneath the MIBOID
+# portion of the mib to the EXEC-COMMAND.
+#
+# Note: You'll have to change the path of the passtest script to your
+# source directory or install it in the given location.
+#
+# Example: (see the script for details)
+# (commented out here since it requires that you place the
+# script in the right location. (its not installed by default))
+
+# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
+# enterprises.ucdavis.255.1 = "life the universe and everything"
+# enterprises.ucdavis.255.2.1 = 42
+# enterprises.ucdavis.255.2.2 = OID: 42.42.42
+# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
+# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
+# enterprises.ucdavis.255.5 = 42
+# enterprises.ucdavis.255.6 = Gauge: 42
+#
+# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
+# enterprises.ucdavis.255.5 = 42
+#
+# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
+# enterprises.ucdavis.255.1 = "New string"
+#
+
+# For specific usage information, see the man/snmpd.conf.5 manual page
+# as well as the local/passtest script used in the above example.
+
+###############################################################################
+# Subagent control
+#
+
+# The agent can support subagents using a number of extension mechanisms.
+# From the 4.2.1 release, AgentX support is being compiled in by default.
+# However, this is still experimental code, so should not be used on
+# critical production systems.
+# Please see the file README.agentx for more details.
+#
+# If having read, marked, learnt and inwardly digested this information,
+# you decide that you do wish to make use of this mechanism, simply
+# uncomment the following directive.
+#
+# master agentx
+#
+# I repeat - this is *NOT* regarded as suitable for front-line production
+# systems, though it is probably stable enough for day-to-day use.
+# Probably.
+#
+# No refunds will be given.
+
+###############################################################################
+# Further Information
+#
+# See the snmpd.conf manual page, and the output of "snmpd -H".
+# MUCH more can be done with the snmpd.conf than is shown as an
+# example here.
+
+###############################################################################
+# interfaces
+
+# types:
+# ieee80211(71)
+# ethernetCsmacd(6),
+
+# interface name type speed
+interface eth0 6 100000000
+interface wlan0 71 5000000
+interface wlan1 71 5000000
diff --git a/recipes/net-snmp/files/mtx-2/snmpd.conf b/recipes/net-snmp/files/mtx-2/snmpd.conf
new file mode 100644
index 0000000000..9067f68d22
--- /dev/null
+++ b/recipes/net-snmp/files/mtx-2/snmpd.conf
@@ -0,0 +1,434 @@
+###############################################################################
+#
+# EXAMPLE.conf:
+# An example configuration file for configuring the ucd-snmp snmpd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example. If, however, you want
+# to use it, it should be placed in /etc/snmp/snmpd.conf.
+# When the snmpd agent starts up, this is where it will look for it.
+#
+# You might be interested in generating your own snmpd.conf file using
+# the "snmpconf" program (perl script) instead. It's a nice menu
+# based interface to writing well commented configuration files. Try it!
+#
+# Note: This file is automatically generated from EXAMPLE.conf.def.
+# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
+# configure & make, and then make sure you read the EXAMPLE.conf file
+# instead, as it will tailor itself to your configuration.
+
+# All lines beginning with a '#' are comments and are intended for you
+# to read. All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmpd.conf(5) manual page as well!
+#
+
+
+###############################################################################
+# Access Control
+###############################################################################
+
+# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
+# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
+# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
+
+# By far, the most common question I get about the agent is "why won't
+# it work?", when really it should be "how do I configure the agent to
+# allow me to access it?"
+#
+# By default, the agent responds to the "public" community for read
+# only access, if run out of the box without any configuration file in
+# place. The following examples show you other ways of configuring
+# the agent so that you can change the community names, and give
+# yourself write access as well.
+#
+# The following lines change the access permissions of the agent so
+# that the COMMUNITY string provides read-only access to your entire
+# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
+# localhost (127.0.0.1, not its real ipaddress).
+#
+# For more information, read the FAQ as well as the snmpd.conf(5)
+# manual page.
+
+####
+# First, map the community name (COMMUNITY) into a security name
+# (local and mynetwork, depending on where the request is coming
+# from):
+
+# sec.name source community
+#com2sec paranoid default public
+com2sec readonly default public
+#com2sec readwrite default private
+
+####
+# Second, map the security names into group names:
+
+# sec.model sec.name
+group MyROSystem v1 paranoid
+group MyROSystem v2c paranoid
+group MyROSystem usm paranoid
+group MyROGroup v1 readonly
+group MyROGroup v2c readonly
+group MyROGroup usm readonly
+group MyRWGroup v1 readwrite
+group MyRWGroup v2c readwrite
+group MyRWGroup usm readwrite
+
+####
+# Third, create a view for us to let the groups have rights to:
+
+# incl/excl subtree mask
+view all included .1 80
+view system included .iso.org.dod.internet.mgmt.mib-2.system
+
+####
+# Finally, grant the 2 groups access to the 1 view with different
+# write permissions:
+
+# context sec.model sec.level match read write notif
+access MyROSystem "" any noauth exact system none none
+access MyROGroup "" any noauth exact all none none
+access MyRWGroup "" any noauth exact all all none
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# System contact information
+#
+
+# It is also possible to set the sysContact and sysLocation system
+# variables through the snmpd.conf file. **PLEASE NOTE** that setting
+# the value of these objects here makes these objects READ-ONLY
+# (regardless of any access control settings). Any attempt to set the
+# value of an object whose value is given here will fail with an error
+# status of notWritable.
+
+syslocation Unknown (configure /etc/snmp/snmpd.local.conf)
+syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
+
+# Example output of snmpwalk:
+# % snmpwalk -v 1 -c public localhost system
+# system.sysDescr.0 = "SunOS name sun4c"
+# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
+# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
+# system.sysContact.0 = "Me <me@somewhere.org>"
+# system.sysName.0 = "name"
+# system.sysLocation.0 = "Right here, right now."
+# system.sysServices.0 = 72
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Process checks.
+#
+# The following are examples of how to use the agent to check for
+# processes running on the host. The syntax looks something like:
+#
+# proc NAME [MAX=0] [MIN=0]
+#
+# NAME: the name of the process to check for. It must match
+# exactly (ie, http will not find httpd processes).
+# MAX: the maximum number allowed to be running. Defaults to 0.
+# MIN: the minimum number to be running. Defaults to 0.
+
+#
+# Examples:
+#
+
+# Make sure mountd is running
+#proc mountd
+
+# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
+#proc ntalkd 4
+
+# Make sure at least one sendmail, but less than or equal to 10 are running.
+#proc sendmail 10 1
+
+# A snmpwalk of the prTable would look something like this:
+#
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
+# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
+# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
+# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
+# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
+# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
+# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
+# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
+# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
+#
+# Note that the errorFlag for mountd is set to 1 because one is not
+# running (in this case an rpc.mountd is, but thats not good enough),
+# and the ErrMessage tells you what's wrong. The configuration
+# imposed in the snmpd.conf file is also shown.
+#
+# Special Case: When the min and max numbers are both 0, it assumes
+# you want a max of infinity and a min of 1.
+#
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Executables/scripts
+#
+
+#
+# You can also have programs run by the agent that return a single
+# line of output and an exit code. Here are two examples.
+#
+# exec NAME PROGRAM [ARGS ...]
+#
+# NAME: A generic name.
+# PROGRAM: The program to run. Include the path!
+# ARGS: optional arguments to be passed to the program
+
+# a simple hello world
+#exec echotest /bin/echo hello world
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+#exec shelltest /bin/sh /tmp/shtest
+
+# Then,
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
+# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
+# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
+# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
+# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
+# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
+# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
+# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
+
+# Note that the second line of the /tmp/shtest shell script is cut
+# off. Also note that the exit status of 35 was returned.
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# disk checks
+#
+
+# The agent can check the amount of available disk space, and make
+# sure it is above a set limit.
+
+# disk PATH [MIN=DEFDISKMINIMUMSPACE]
+#
+# PATH: mount path to the disk in question.
+# MIN: Disks with space below this value will have the Mib's errorFlag set.
+# Default value = DEFDISKMINIMUMSPACE.
+
+# Check the / partition and make sure it contains at least 10 megs.
+
+#disk / 10000
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
+# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
+# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
+# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
+# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
+# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
+# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
+# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# load average checks
+#
+
+# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE]
+#
+# 1MAX: If the 1 minute load average is above this limit at query
+# time, the errorFlag will be set.
+# 5MAX: Similar, but for 5 min average.
+# 15MAX: Similar, but for 15 min average.
+
+# Check for loads:
+#load 12 14 14
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Extensible sections.
+#
+
+# This alleviates the multiple line output problem found in the
+# previous executable mib by placing each mib in its own mib table:
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
+# enterprises.ucdavis.50.1.1 = 1
+# enterprises.ucdavis.50.2.1 = "shelltest"
+# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.50.100.1 = 35
+# enterprises.ucdavis.50.101.1 = "hello world."
+# enterprises.ucdavis.50.101.2 = "hi there."
+# enterprises.ucdavis.50.102.1 = 0
+
+# Now the Output has grown to two lines, and we can see the 'hi
+# there.' output as the second line from our shell script.
+#
+# Note that you must alter the mib.txt file to be correct if you want
+# the .50.* outputs above to change to reasonable text descriptions.
+
+# Other ideas:
+#
+# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
+# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
+# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Pass through control.
+#
+
+# Usage:
+# pass MIBOID EXEC-COMMAND
+#
+# This will pass total control of the mib underneath the MIBOID
+# portion of the mib to the EXEC-COMMAND.
+#
+# Note: You'll have to change the path of the passtest script to your
+# source directory or install it in the given location.
+#
+# Example: (see the script for details)
+# (commented out here since it requires that you place the
+# script in the right location. (its not installed by default))
+
+# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
+# enterprises.ucdavis.255.1 = "life the universe and everything"
+# enterprises.ucdavis.255.2.1 = 42
+# enterprises.ucdavis.255.2.2 = OID: 42.42.42
+# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
+# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
+# enterprises.ucdavis.255.5 = 42
+# enterprises.ucdavis.255.6 = Gauge: 42
+#
+# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
+# enterprises.ucdavis.255.5 = 42
+#
+# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
+# enterprises.ucdavis.255.1 = "New string"
+#
+
+# For specific usage information, see the man/snmpd.conf.5 manual page
+# as well as the local/passtest script used in the above example.
+
+###############################################################################
+# Subagent control
+#
+
+# The agent can support subagents using a number of extension mechanisms.
+# From the 4.2.1 release, AgentX support is being compiled in by default.
+# However, this is still experimental code, so should not be used on
+# critical production systems.
+# Please see the file README.agentx for more details.
+#
+# If having read, marked, learnt and inwardly digested this information,
+# you decide that you do wish to make use of this mechanism, simply
+# uncomment the following directive.
+#
+# master agentx
+#
+# I repeat - this is *NOT* regarded as suitable for front-line production
+# systems, though it is probably stable enough for day-to-day use.
+# Probably.
+#
+# No refunds will be given.
+
+###############################################################################
+# Further Information
+#
+# See the snmpd.conf manual page, and the output of "snmpd -H".
+# MUCH more can be done with the snmpd.conf than is shown as an
+# example here.
+
+###############################################################################
+# interfaces
+
+# types:
+# ieee80211(71)
+# ethernetCsmacd(6),
+
+# interface name type speed
+interface eth0 6 100000000
+interface wlan0 71 5000000
+interface wlan1 71 5000000
diff --git a/recipes/net-snmp/files/snmpd.conf b/recipes/net-snmp/files/snmpd.conf
new file mode 100644
index 0000000000..728171c427
--- /dev/null
+++ b/recipes/net-snmp/files/snmpd.conf
@@ -0,0 +1,422 @@
+###############################################################################
+#
+# EXAMPLE.conf:
+# An example configuration file for configuring the ucd-snmp snmpd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example. If, however, you want
+# to use it, it should be placed in /etc/snmp/snmpd.conf.
+# When the snmpd agent starts up, this is where it will look for it.
+#
+# You might be interested in generating your own snmpd.conf file using
+# the "snmpconf" program (perl script) instead. It's a nice menu
+# based interface to writing well commented configuration files. Try it!
+#
+# Note: This file is automatically generated from EXAMPLE.conf.def.
+# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
+# configure & make, and then make sure you read the EXAMPLE.conf file
+# instead, as it will tailor itself to your configuration.
+
+# All lines beginning with a '#' are comments and are intended for you
+# to read. All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmpd.conf(5) manual page as well!
+#
+
+
+###############################################################################
+# Access Control
+###############################################################################
+
+# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
+# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
+# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
+
+# By far, the most common question I get about the agent is "why won't
+# it work?", when really it should be "how do I configure the agent to
+# allow me to access it?"
+#
+# By default, the agent responds to the "public" community for read
+# only access, if run out of the box without any configuration file in
+# place. The following examples show you other ways of configuring
+# the agent so that you can change the community names, and give
+# yourself write access as well.
+#
+# The following lines change the access permissions of the agent so
+# that the COMMUNITY string provides read-only access to your entire
+# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
+# localhost (127.0.0.1, not its real ipaddress).
+#
+# For more information, read the FAQ as well as the snmpd.conf(5)
+# manual page.
+
+####
+# First, map the community name (COMMUNITY) into a security name
+# (local and mynetwork, depending on where the request is coming
+# from):
+
+# sec.name source community
+com2sec paranoid default public
+#com2sec readonly default public
+#com2sec readwrite default private
+
+####
+# Second, map the security names into group names:
+
+# sec.model sec.name
+group MyROSystem v1 paranoid
+group MyROSystem v2c paranoid
+group MyROSystem usm paranoid
+group MyROGroup v1 readonly
+group MyROGroup v2c readonly
+group MyROGroup usm readonly
+group MyRWGroup v1 readwrite
+group MyRWGroup v2c readwrite
+group MyRWGroup usm readwrite
+
+####
+# Third, create a view for us to let the groups have rights to:
+
+# incl/excl subtree mask
+view all included .1 80
+view system included .iso.org.dod.internet.mgmt.mib-2.system
+
+####
+# Finally, grant the 2 groups access to the 1 view with different
+# write permissions:
+
+# context sec.model sec.level match read write notif
+access MyROSystem "" any noauth exact system none none
+access MyROGroup "" any noauth exact all none none
+access MyRWGroup "" any noauth exact all all none
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# System contact information
+#
+
+# It is also possible to set the sysContact and sysLocation system
+# variables through the snmpd.conf file. **PLEASE NOTE** that setting
+# the value of these objects here makes these objects READ-ONLY
+# (regardless of any access control settings). Any attempt to set the
+# value of an object whose value is given here will fail with an error
+# status of notWritable.
+
+syslocation Unknown (configure /etc/snmp/snmpd.local.conf)
+syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
+
+# Example output of snmpwalk:
+# % snmpwalk -v 1 -c public localhost system
+# system.sysDescr.0 = "SunOS name sun4c"
+# system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
+# system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
+# system.sysContact.0 = "Me <me@somewhere.org>"
+# system.sysName.0 = "name"
+# system.sysLocation.0 = "Right here, right now."
+# system.sysServices.0 = 72
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Process checks.
+#
+# The following are examples of how to use the agent to check for
+# processes running on the host. The syntax looks something like:
+#
+# proc NAME [MAX=0] [MIN=0]
+#
+# NAME: the name of the process to check for. It must match
+# exactly (ie, http will not find httpd processes).
+# MAX: the maximum number allowed to be running. Defaults to 0.
+# MIN: the minimum number to be running. Defaults to 0.
+
+#
+# Examples:
+#
+
+# Make sure mountd is running
+#proc mountd
+
+# Make sure there are no more than 4 ntalkds running, but 0 is ok too.
+#proc ntalkd 4
+
+# Make sure at least one sendmail, but less than or equal to 10 are running.
+#proc sendmail 10 1
+
+# A snmpwalk of the prTable would look something like this:
+#
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
+# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
+# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
+# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
+# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
+# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
+# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
+# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
+# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
+#
+# Note that the errorFlag for mountd is set to 1 because one is not
+# running (in this case an rpc.mountd is, but thats not good enough),
+# and the ErrMessage tells you what's wrong. The configuration
+# imposed in the snmpd.conf file is also shown.
+#
+# Special Case: When the min and max numbers are both 0, it assumes
+# you want a max of infinity and a min of 1.
+#
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Executables/scripts
+#
+
+#
+# You can also have programs run by the agent that return a single
+# line of output and an exit code. Here are two examples.
+#
+# exec NAME PROGRAM [ARGS ...]
+#
+# NAME: A generic name.
+# PROGRAM: The program to run. Include the path!
+# ARGS: optional arguments to be passed to the program
+
+# a simple hello world
+#exec echotest /bin/echo hello world
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+#exec shelltest /bin/sh /tmp/shtest
+
+# Then,
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
+# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
+# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
+# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
+# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
+# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
+# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
+# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
+
+# Note that the second line of the /tmp/shtest shell script is cut
+# off. Also note that the exit status of 35 was returned.
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# disk checks
+#
+
+# The agent can check the amount of available disk space, and make
+# sure it is above a set limit.
+
+# disk PATH [MIN=DEFDISKMINIMUMSPACE]
+#
+# PATH: mount path to the disk in question.
+# MIN: Disks with space below this value will have the Mib's errorFlag set.
+# Default value = DEFDISKMINIMUMSPACE.
+
+# Check the / partition and make sure it contains at least 10 megs.
+
+#disk / 10000
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
+# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
+# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
+# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
+# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
+# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
+# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
+# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# load average checks
+#
+
+# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE]
+#
+# 1MAX: If the 1 minute load average is above this limit at query
+# time, the errorFlag will be set.
+# 5MAX: Similar, but for 5 min average.
+# 15MAX: Similar, but for 15 min average.
+
+# Check for loads:
+#load 12 14 14
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Extensible sections.
+#
+
+# This alleviates the multiple line output problem found in the
+# previous executable mib by placing each mib in its own mib table:
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note: this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do. Uncomment to use it.
+#
+# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
+# enterprises.ucdavis.50.1.1 = 1
+# enterprises.ucdavis.50.2.1 = "shelltest"
+# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.50.100.1 = 35
+# enterprises.ucdavis.50.101.1 = "hello world."
+# enterprises.ucdavis.50.101.2 = "hi there."
+# enterprises.ucdavis.50.102.1 = 0
+
+# Now the Output has grown to two lines, and we can see the 'hi
+# there.' output as the second line from our shell script.
+#
+# Note that you must alter the mib.txt file to be correct if you want
+# the .50.* outputs above to change to reasonable text descriptions.
+
+# Other ideas:
+#
+# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
+# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
+# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Pass through control.
+#
+
+# Usage:
+# pass MIBOID EXEC-COMMAND
+#
+# This will pass total control of the mib underneath the MIBOID
+# portion of the mib to the EXEC-COMMAND.
+#
+# Note: You'll have to change the path of the passtest script to your
+# source directory or install it in the given location.
+#
+# Example: (see the script for details)
+# (commented out here since it requires that you place the
+# script in the right location. (its not installed by default))
+
+# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
+# enterprises.ucdavis.255.1 = "life the universe and everything"
+# enterprises.ucdavis.255.2.1 = 42
+# enterprises.ucdavis.255.2.2 = OID: 42.42.42
+# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
+# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
+# enterprises.ucdavis.255.5 = 42
+# enterprises.ucdavis.255.6 = Gauge: 42
+#
+# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
+# enterprises.ucdavis.255.5 = 42
+#
+# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
+# enterprises.ucdavis.255.1 = "New string"
+#
+
+# For specific usage information, see the man/snmpd.conf.5 manual page
+# as well as the local/passtest script used in the above example.
+
+###############################################################################
+# Subagent control
+#
+
+# The agent can support subagents using a number of extension mechanisms.
+# From the 4.2.1 release, AgentX support is being compiled in by default.
+# However, this is still experimental code, so should not be used on
+# critical production systems.
+# Please see the file README.agentx for more details.
+#
+# If having read, marked, learnt and inwardly digested this information,
+# you decide that you do wish to make use of this mechanism, simply
+# uncomment the following directive.
+#
+# master agentx
+#
+# I repeat - this is *NOT* regarded as suitable for front-line production
+# systems, though it is probably stable enough for day-to-day use.
+# Probably.
+#
+# No refunds will be given.
+
+###############################################################################
+# Further Information
+#
+# See the snmpd.conf manual page, and the output of "snmpd -H".
+# MUCH more can be done with the snmpd.conf than is shown as an
+# example here.
diff --git a/recipes/net-snmp/files/snmptrapd.conf b/recipes/net-snmp/files/snmptrapd.conf
new file mode 100644
index 0000000000..8d2e4375ef
--- /dev/null
+++ b/recipes/net-snmp/files/snmptrapd.conf
@@ -0,0 +1,18 @@
+###############################################################################
+#
+# EXAMPLE.conf:
+# An example configuration file for configuring the ucd-snmp snmptrapd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example. If, however, you want
+# to use it, it should be placed in /etc/snmp/snmptrapd.conf.
+# When the snmptrapd agent starts up, this is where it will look for it.
+#
+# All lines beginning with a '#' are comments and are intended for you
+# to read. All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmptrapd.conf(5) manual page as well!
+#
+
diff --git a/recipes/net-snmp/files/uclibc-fix.patch b/recipes/net-snmp/files/uclibc-fix.patch
new file mode 100644
index 0000000000..7109798e14
--- /dev/null
+++ b/recipes/net-snmp/files/uclibc-fix.patch
@@ -0,0 +1,11 @@
+--- net-snmp-5.1.2/config.sub.orig 2005-10-28 22:43:40.228326250 +0100
++++ net-snmp-5.1.2/config.sub 2005-10-28 22:43:55.565284750 +0100
+@@ -118,7 +118,7 @@
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+- nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
++ nto-qnx* | linux-gnu* | linux-uclibc* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
diff --git a/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch b/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch
new file mode 100644
index 0000000000..89f9309535
--- /dev/null
+++ b/recipes/net-snmp/net-snmp-5.4.1/configure-tail.patch
@@ -0,0 +1,99 @@
+diff -urN net-snmp-5.4.1-orig/acinclude.m4 net-snmp-5.4.1-patched/acinclude.m4
+--- net-snmp-5.4.1-orig/acinclude.m4 2006-08-15 05:25:49.000000000 +0200
++++ net-snmp-5.4.1-patched/acinclude.m4 2007-08-14 13:22:13.000000000 +0200
+@@ -39,7 +39,7 @@
+ dnl
+ AC_DEFUN([AC_PROMPT_USER],
+ [
+-MSG_CHECK=`echo "$2" | tail -1`
++MSG_CHECK=`echo "$2" | tail -n 1`
+ AC_CACHE_CHECK($MSG_CHECK, ac_cv_user_prompt_$1,
+ [echo "" >&AC_FD_MSG
+ AC_PROMPT_USER_NO_DEFINE($1,[$2],$3)
+diff -urN net-snmp-5.4.1-orig/configure net-snmp-5.4.1-patched/configure
+--- net-snmp-5.4.1-orig/configure 2007-07-27 19:04:19.000000000 +0200
++++ net-snmp-5.4.1-patched/configure 2007-08-14 13:22:13.000000000 +0200
+@@ -26417,7 +26417,7 @@
+ # hpux make (at least) doesn't like a trailing \ on the last
+ # line even when the next line contains nothing but
+ # whitespace.
+- lasttoken=`tail -1 mk/$i.mk | awk '{print $1}'`
++ lasttoken=`tail -n 1 mk/$i.mk | awk '{print $1}'`
+ sed "s#$lasttoken \\\\#$lasttoken#" < mk/$i.mk > mk/$i.mk.tmp
+ mv mk/$i.mk.tmp mk/$i.mk
+
+@@ -48793,7 +48793,7 @@
+
+ ME=`$WHOAMI`
+ if test -f /etc/resolv.conf; then
+- LOC=`cat /etc/resolv.conf | grep '^domain' | tail -1 | awk '{print $NF}'`
++ LOC=`cat /etc/resolv.conf | grep '^domain' | tail -n 1 | awk '{print $NF}'`
+ else
+ LOC="@no.where"
+ fi
+@@ -48819,7 +48819,7 @@
+ Providing the --with-default-snmp-version=\"x\" parameter to ./configure
+ will avoid this prompt.
+
+-Default version of SNMP to use" | tail -1`
++Default version of SNMP to use" | tail -n 1`
+ echo "$as_me:$LINENO: checking $MSG_CHECK" >&5
+ echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6
+ if test "${ac_cv_user_prompt_NETSNMP_DEFAULT_SNMP_VERSION+set}" = set; then
+@@ -48903,7 +48903,7 @@
+ Providing the --with-sys-contact=\"contact\" parameter to ./configure
+ will avoid this prompt.
+
+-System Contact Information" | tail -1`
++System Contact Information" | tail -n 1`
+ echo "$as_me:$LINENO: checking $MSG_CHECK" >&5
+ echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6
+ if test "${ac_cv_user_prompt_NETSNMP_SYS_CONTACT+set}" = set; then
+@@ -48967,7 +48967,7 @@
+ Providing the --with-sys-location=\"location\" parameter to ./configure
+ will avoid this prompt.
+
+-System Location" | tail -1`
++System Location" | tail -n 1`
+ echo "$as_me:$LINENO: checking $MSG_CHECK" >&5
+ echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6
+ if test "${ac_cv_user_prompt_NETSNMP_SYS_LOC+set}" = set; then
+@@ -49037,7 +49037,7 @@
+ Providing the --with-logfile=\"path\" parameter to ./configure
+ will avoid this prompt.
+
+-Location to write logfile" | tail -1`
++Location to write logfile" | tail -n 1`
+ echo "$as_me:$LINENO: checking $MSG_CHECK" >&5
+ echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6
+ if test "${ac_cv_user_prompt_NETSNMP_LOGFILE+set}" = set; then
+@@ -49114,7 +49114,7 @@
+ Providing the --with-persistent-directory=\"path\" parameter to
+ ./configure will avoid this prompt.
+
+-Location to write persistent information" | tail -1`
++Location to write persistent information" | tail -n 1`
+ echo "$as_me:$LINENO: checking $MSG_CHECK" >&5
+ echo $ECHO_N "checking $MSG_CHECK... $ECHO_C" >&6
+ if test "${ac_cv_user_prompt_NETSNMP_PERSISTENT_DIRECTORY+set}" = set; then
+diff -urN net-snmp-5.4.1-orig/configure.in net-snmp-5.4.1-patched/configure.in
+--- net-snmp-5.4.1-orig/configure.in 2007-07-27 19:02:00.000000000 +0200
++++ net-snmp-5.4.1-patched/configure.in 2007-08-14 13:22:13.000000000 +0200
+@@ -2465,7 +2465,7 @@
+ # hpux make (at least) doesn't like a trailing \ on the last
+ # line even when the next line contains nothing but
+ # whitespace.
+- lasttoken=`tail -1 mk/$i.mk | awk '{print $1}'`
++ lasttoken=`tail -n 1 mk/$i.mk | awk '{print $1}'`
+ sed "s#$lasttoken \\\\#$lasttoken#" < mk/$i.mk > mk/$i.mk.tmp
+ mv mk/$i.mk.tmp mk/$i.mk
+
+@@ -4575,7 +4575,7 @@
+
+ ME=`$WHOAMI`
+ if test -f /etc/resolv.conf; then
+- LOC=`cat /etc/resolv.conf | grep '^domain' | tail -1 | awk '{print $NF}'`
++ LOC=`cat /etc/resolv.conf | grep '^domain' | tail -n 1 | awk '{print $NF}'`
+ else
+ LOC="@no.where"
+ fi
diff --git a/recipes/net-snmp/net-snmp.inc b/recipes/net-snmp/net-snmp.inc
new file mode 100644
index 0000000000..bbe809696e
--- /dev/null
+++ b/recipes/net-snmp/net-snmp.inc
@@ -0,0 +1,97 @@
+DESCRIPTION = "Various tools relating to the Simple Network Management Protocol"
+HOMEPAGE = "http://www.net-snmp.org/"
+LICENSE = "BSD"
+DEPENDS = "openssl"
+RDEPENDS_${PN}-server += "net-snmp-mibs"
+RDEPENDS_${PN}-client += "net-snmp-mibs"
+RDEPENDS_${PN}-dev = "net-snmp-client (= ${EXTENDPV}) net-snmp-server (= ${EXTENDPV})"
+RRECOMMENDS_${PN}-dbg = "net-snmp-client (= ${EXTENDPV}) net-snmp-server (= ${EXTENDPV})"
+
+inherit autotools update-rc.d
+
+
+do_configure() {
+ # Additional flag based on target endiness (see siteinfo.bbclass)
+ ENDIANESS="${@base_conditional('SITEINFO_ENDIANESS', 'le', '--with-endianness=little', '--with-endianness=big', d)}"
+ oenote Determined endianess as: $ENDIANESS
+ oe_runconf $ENDIANESS
+}
+
+do_install_append() {
+ install -d ${D}${sysconfdir}/snmp
+ install -d ${D}${sysconfdir}/init.d
+ install -m 755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/snmpd
+ install -m 644 ${WORKDIR}/snmpd.conf ${D}${sysconfdir}/snmp/
+ install -m 644 ${WORKDIR}/snmptrapd.conf ${D}${sysconfdir}/snmp/
+}
+
+do_stage() {
+ rm -rf ${STAGE_TEMP}
+ mkdir -p ${STAGE_TEMP}
+ oe_runmake INSTALL_PREFIX="${STAGE_TEMP}" install
+ autotools_stage_dir ${STAGE_TEMP}/${includedir} ${STAGING_INCDIR}
+ if [ -d ${STAGE_TEMP}/${libdir} ]
+ then
+ olddir=`pwd`
+ cd ${STAGE_TEMP}/${libdir}
+ las=$(find . -name \*.la -type f)
+ cd $olddir
+ echo "Found la files: $las"
+ for i in $las
+ do
+ sed -e 's/^installed=yes$/installed=no/' \
+ -e '/^dependency_libs=/s,${WORKDIR}[[:alnum:]/\._+-]*/\([[:alnum:]\._+-]*\),${STAGING_LIBDIR}/\1,g' \
+ -e "/^dependency_libs=/s,\([[:space:]']\)${libdir},\1${STAGING_LIBDIR},g" \
+ -i ${STAGE_TEMP}/${libdir}/$i
+ done
+ autotools_stage_dir ${STAGE_TEMP}/${libdir} ${STAGING_LIBDIR}
+ fi
+ install -d ${STAGING_DIR_HOST}${layout_bindir}
+ sed -e "s@-I/usr/include@@g" \
+ -e "s@^prefix=.*@prefix=${STAING_DIR_HOST}@g" \
+ -e "s@^exec_prefix=.*@exec_prefix=${STAING_DIR_HOST}@g" \
+ -e "s@^includedir=.*@includedir=${STAGING_INCDIR}@g" \
+ -e "s@^libdir=.*@libdir=${STAGING_LIBDIR}@g" \
+ -i net-snmp-config
+
+ install -m 755 net-snmp-config ${STAGING_DIR_HOST}${layout_bindir}
+ rm -Rf ${STAGE_TEMP}
+}
+
+PACKAGES = "net-snmp-dbg net-snmp-doc net-snmp-dev net-snmp-libs \
+ net-snmp-mibs net-snmp-server net-snmp-client"
+
+FILES_${PN}-libs = "${libdir}/*"
+FILES_${PN}-mibs = "${datadir}/snmp/mibs"
+FILES_${PN}-server = "${sbindir}/* ${sysconfdir}"
+FILES_${PN}-client = "${bindir}/* ${datadir}/snmp/"
+FILES_${PN}-dbg += "${libdir}/.debug/ ${sbindir}/.debug/ ${bindir}/.debug/"
+FILES_${PN}-dev += ${bindir}/net-snmp-config ${bindir}/mib2c ${bindir}/mib2c-update"
+
+CONFFILES_${PN}-server = "${sysconfdir}/snmp/snmpd.conf \
+ ${sysconfdir}/snmp/snmptrapd.conf"
+
+INITSCRIPT_PACKAGES = "${PN}-server"
+INITSCRIPT_NAME_${PN}-server = "snmpd"
+INITSCRIPT_PARAMS_${PN}-server = "defaults"
+
+LEAD_SONAME = "libnetsnmp.so"
+
+pkg_postinst_net-snmp-server() {
+if test "x$D" != "x"; then
+ D="-r $D"
+else
+ D="-s"
+fi
+update-rc.d $D snmpd defaults
+}
+
+pkg_postrm_net-snmp-server() {
+if test "x$D" != "x"; then
+ D="-r $D"
+else
+ /etc/init.d/snmpd stop
+fi
+update-rc.d $D snmpd remove
+}
+
diff --git a/recipes/net-snmp/net-snmp_5.1.2.bb b/recipes/net-snmp/net-snmp_5.1.2.bb
new file mode 100644
index 0000000000..527c9e33b1
--- /dev/null
+++ b/recipes/net-snmp/net-snmp_5.1.2.bb
@@ -0,0 +1,18 @@
+require net-snmp.inc
+PR = "r4"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \
+ file://uclibc-fix.patch;patch=1 \
+ file://init \
+ file://snmpd.conf \
+ file://snmptrapd.conf"
+
+inherit autotools
+
+PARALLEL_MAKE = ""
+EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults"
+EXTRA_OEMAKE = "INSTALL_PREFIX=${D}"
+
+CONFFILES_${PN}_nylon = "${sysconfdir}/snmp/snmpd.conf ${sysconfdir}/snmp/snmptrapd.conf"
+CCACHE = ""
+
diff --git a/recipes/net-snmp/net-snmp_5.4.1.bb b/recipes/net-snmp/net-snmp_5.4.1.bb
new file mode 100644
index 0000000000..f76005b435
--- /dev/null
+++ b/recipes/net-snmp/net-snmp_5.4.1.bb
@@ -0,0 +1,20 @@
+require net-snmp.inc
+PR = "r2"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz \
+ file://configure-tail.patch;patch=1 \
+ file://init \
+ file://snmpd.conf \
+ file://snmptrapd.conf"
+
+EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults \
+ --disable-embedded-perl --with-perl-modules=no"
+EXTRA_OEMAKE = "INSTALL_PREFIX=${D}"
+
+do_configure_prepend() {
+ libtoolize --force
+}
+
+PARALLEL_MAKE = ""
+CCACHE = ""
+
diff --git a/recipes/net-snmp/net-snmp_svn.bb b/recipes/net-snmp/net-snmp_svn.bb
new file mode 100644
index 0000000000..2f82865aaa
--- /dev/null
+++ b/recipes/net-snmp/net-snmp_svn.bb
@@ -0,0 +1,27 @@
+require net-snmp.inc
+DEPENDS += "libtool libtool-native libtool-cross"
+
+PR = "r3"
+S = "${WORKDIR}/net-snmp"
+
+SRC_URI = "svn://net-snmp.svn.sourceforge.net/svnroot/net-snmp/trunk;rev=17367;module=net-snmp;proto=https \
+ file://init \
+ file://snmpd.conf \
+ file://snmptrapd.conf"
+
+EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults \
+ --disable-embedded-perl --with-perl-modules=no GREP=/bin/grep SED=/bin/sed"
+EXTRA_OEMAKE = "INSTALL_PREFIX=${D}"
+
+PARALLEL_MAKE = ""
+CCACHE = ""
+
+do_configure_prepend() {
+ gnu-configize -f
+ # We better change sources and re-autoconf here, but
+ # required autoconf is too new for us.
+ sed -e '/echo.*\".*\\\\.*\"/s/echo/echo -e/g' \
+ -e 's/tail -1/tail -n 1/g' \
+ -i configure
+}
+