diff options
Diffstat (limited to 'recipes/linux')
19 files changed, 3200 insertions, 19 deletions
diff --git a/recipes/linux/linux-omap-2.6.31/beagleboard/defconfig b/recipes/linux/linux-omap-2.6.31/beagleboard/defconfig index 81f3cadce4..629148b783 100644 --- a/recipes/linux/linux-omap-2.6.31/beagleboard/defconfig +++ b/recipes/linux/linux-omap-2.6.31/beagleboard/defconfig @@ -224,7 +224,7 @@ CONFIG_ARCH_OMAP3430=y # CONFIG_MACH_OMAP3_BEAGLE=y # CONFIG_MACH_OMAP_LDP is not set -CONFIG_MACH_OVERO=y +CONFIG_MACH_OVERO=n CONFIG_MACH_OMAP3EVM=y # CONFIG_MACH_OMAP3_PANDORA is not set # CONFIG_MACH_OMAP_3430SDP is not set diff --git a/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch b/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch index 633b1b2269..d8dcd522dc 100644 --- a/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch +++ b/recipes/linux/linux-omap-2.6.31/beagleboard/ehci.patch @@ -20,16 +20,3 @@ index 07aee90..65934ea 100644 /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -@@ -412,7 +412,8 @@ static void __init omap3_beagle_init(void) - gpio_direction_output(170, true); - - usb_musb_init(); -- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); -+ usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, -+ -EINVAL, 147); - omap3beagle_flash_init(); - - /* Ensure SDRC pins are mux'd for self-refresh */ --- -1.6.0.4 - diff --git a/recipes/linux/linux-omap-2.6.31/usb/0001-musb-fix-put_device-call-sequence.patch b/recipes/linux/linux-omap-2.6.31/usb/0001-musb-fix-put_device-call-sequence.patch new file mode 100644 index 0000000000..1164fcb417 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0001-musb-fix-put_device-call-sequence.patch @@ -0,0 +1,45 @@ +From f5d23fe1ff54df953c7b65699d6065b4a6336932 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Mon, 3 Aug 2009 11:16:18 +0530 +Subject: [PATCH 01/16] musb: fix put_device() call sequence + +Invoke put_device(musb->xceiv->dev) before musb_platform_exit()as +xceiv is getting unregistered in musb_platform_exit(). + +Fixes put_device() panic when module insert/removal is performed +multiple times. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/musb/musb_core.c | 8 ++++---- + 1 files changed, 4 insertions(+), 4 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index c7c1ca0..129f9dc 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -1850,6 +1850,10 @@ static void musb_free(struct musb *musb) + dma_controller_destroy(c); + } + ++#ifdef CONFIG_USB_MUSB_OTG ++ put_device(musb->xceiv->dev); ++#endif ++ + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + musb_platform_exit(musb); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); +@@ -1859,10 +1863,6 @@ static void musb_free(struct musb *musb) + clk_put(musb->clock); + } + +-#ifdef CONFIG_USB_MUSB_OTG +- put_device(musb->xceiv->dev); +-#endif +- + #ifdef CONFIG_USB_MUSB_HDRC_HCD + usb_put_hcd(musb_to_hcd(musb)); + #else +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch b/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch new file mode 100644 index 0000000000..82e4c1edb0 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0002-ehci-fix-ehci-pin-mux-init.patch @@ -0,0 +1,206 @@ +From 9c6a05af8f862025f5187a2f37be87db39ae709f Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 3 Jul 2009 15:55:24 +0530 +Subject: [PATCH 02/16] ehci: fix ehci pin mux init + +EHCI pin mux init fucntion is still using old #ifdef which are not defined +anymore.This causes pin mux init to always set TLL settings and thus EHCI +PHY mode doesn't work. + +Fixing this issue by using phy_mode parameter to initialize mux settings. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> +--- + arch/arm/mach-omap2/usb-ehci.c | 167 ++++++++++++++++++++-------------------- + 1 files changed, 83 insertions(+), 84 deletions(-) + +diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c +index 56fc7f4..6a96569 100644 +--- a/arch/arm/mach-omap2/usb-ehci.c ++++ b/arch/arm/mach-omap2/usb-ehci.c +@@ -68,90 +68,89 @@ static struct platform_device ehci_device = { + /* + * setup_ehci_io_mux - initialize IO pad mux for USBHOST + */ +-static void setup_ehci_io_mux(void) ++static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) + { +-#ifdef CONFIG_OMAP_EHCI_PHY_MODE +- /* PHY mode of operation for board: 750-2083-001 +- * ISP1504 connected to Port1 and Port2 +- * Do Func Mux setting for 12-pin ULPI PHY mode +- */ +- +- /* Port1 */ +- omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); +- omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); +- omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); +- omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); +- omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); +- omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); +- omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); +- omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); +- omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); +- omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); +- omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); +- omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); +- +- /* Port2 */ +- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); +- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); +- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); +- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); +- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); +- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); +- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); +- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); +- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); +- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); +- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); +- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); +- +-#else +- /* Set Func mux for : +- * TLL mode of operation +- * 12-pin ULPI SDR TLL mode for Port1/2/3 +- */ +- +- /* Port1 */ +- omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); +- omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); +- omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); +- omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); +- omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); +- omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); +- omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); +- omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); +- omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); +- omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); +- omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); +- omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); +- +- /* Port2 */ +- omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); +- omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); +- omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); +- omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); +- omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); +- omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); +- omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); +- omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); +- omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); +- omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); +- omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); +- omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); +- +- /* Port3 */ +- omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); +- omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); +- omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); +- omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); +- omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); +- omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); +- omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); +- omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); +- omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); +- omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); +- omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); +- omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); +-#endif /* CONFIG_OMAP_EHCI_PHY_MODE */ ++ if (phy_mode == EHCI_HCD_OMAP_MODE_PHY) { ++ /* PHY mode of operation for board: 750-2083-001 ++ * ISP1504 connected to Port1 and Port2 ++ * Do Func Mux setting for 12-pin ULPI PHY mode ++ */ ++ /* Port1 */ ++ omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); ++ omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); ++ omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); ++ omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); ++ omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); ++ omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); ++ omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); ++ omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); ++ omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); ++ omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); ++ omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); ++ omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); ++ ++ /* Port2 */ ++ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); ++ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); ++ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); ++ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); ++ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); ++ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); ++ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); ++ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); ++ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); ++ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); ++ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); ++ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); ++ ++ } else { ++ /* Set Func mux for : ++ * TLL mode of operation ++ * 12-pin ULPI SDR TLL mode for Port1/2/3 ++ */ ++ ++ /* Port1 */ ++ omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); ++ omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); ++ omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); ++ omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); ++ omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); ++ omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); ++ omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); ++ omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); ++ omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); ++ omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); ++ omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); ++ omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); ++ ++ /* Port2 */ ++ omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); ++ omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); ++ omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); ++ omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); ++ omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); ++ omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); ++ omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); ++ omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); ++ omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); ++ omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); ++ omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); ++ omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); ++ ++ /* Port3 */ ++ omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); ++ omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); ++ omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); ++ omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); ++ omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); ++ omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); ++ omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); ++ omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); ++ omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); ++ omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); ++ omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); ++ omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); ++ } + + return; + } +@@ -172,7 +171,7 @@ void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, + + /* Setup Pin IO MUX for EHCI */ + if (cpu_is_omap34xx()) +- setup_ehci_io_mux(); ++ setup_ehci_io_mux(phy_mode); + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch b/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch new file mode 100644 index 0000000000..e740614864 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch @@ -0,0 +1,42 @@ +From 2f0fe550c81056cb22c0cb8bf54c464e313e1047 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Mon, 6 Jul 2009 12:46:08 +0530 +Subject: [PATCH 03/16] ehci: adding mux pin for EHCI phy reset line + +GPIO135 is used as EHCI (port2) phy reset pin on Multi Media Daughter card +connected to OMAP3EVM. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + arch/arm/mach-omap2/mux.c | 2 ++ + arch/arm/plat-omap/include/mach/mux.h | 1 + + 2 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c +index 2daa595..339ba80 100644 +--- a/arch/arm/mach-omap2/mux.c ++++ b/arch/arm/mach-omap2/mux.c +@@ -472,6 +472,8 @@ MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) + MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) ++MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, ++ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) + MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, + OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) + MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, +diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h +index 98dfab6..4bcf8a5 100644 +--- a/arch/arm/plat-omap/include/mach/mux.h ++++ b/arch/arm/plat-omap/include/mach/mux.h +@@ -846,6 +846,7 @@ enum omap34xx_index { + L8_34XX_GPIO63, + G25_34XX_GPIO86_OUT, + AG4_34XX_GPIO134_OUT, ++ AF4_34XX_GPIO135_OUT, + AE4_34XX_GPIO136_OUT, + AF6_34XX_GPIO140_UP, + AE6_34XX_GPIO141, +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch b/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch new file mode 100644 index 0000000000..65bb871682 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch @@ -0,0 +1,34 @@ +From 4cc29612d5a706049b14e67bcc3b22490bdddcf7 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 10 Jul 2009 10:01:39 +0530 +Subject: [PATCH 04/16] ehci: correct EHCI init parameters on OMAP3EVM + +Multimedia Daughter card on OMAP3EVM uses port2 as EHCI port. +Other ports (port1 and port3)are not used. + +GPIO135 has been used as EHCI phy reset pin so the mux config +is also setup. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + arch/arm/mach-omap2/board-omap3evm.c | 4 +++- + 1 files changed, 3 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index 35f6075..18b747b 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -308,7 +308,9 @@ static void __init omap3_evm_init(void) + usb_nop_xceiv_register(); + #endif + usb_musb_init(); +- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); ++ /* Setup EHCI phy reset padconfig */ ++ omap_cfg_reg(AF4_34XX_GPIO135_OUT); ++ usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, -EINVAL, 135); + ads7846_dev_init(); + } + +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/ehci-phy-reset.patch b/recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch index 4041c21306..07f9386170 100644 --- a/recipes/linux/linux-omap-2.6.31/ehci-phy-reset.patch +++ b/recipes/linux/linux-omap-2.6.31/usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch @@ -1,3 +1,8 @@ +From 42c413f8f9005a5ca109f82baff81f8e400b8854 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Mon, 13 Jul 2009 14:10:46 +0530 +Subject: [PATCH 05/16] ehci: fix phy_reset init in ehci probe + phy_reset is not getting updated from platform_data. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> @@ -28,7 +33,3 @@ index 0058f03..55e5259 100644 -- 1.6.2.4 --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch b/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch new file mode 100644 index 0000000000..1190aada1f --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch @@ -0,0 +1,30 @@ +From 4e499dd02940a567ca805010e9c3f78d8ab7bc79 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Mon, 6 Jul 2009 17:59:02 +0530 +Subject: [PATCH 06/16] ehci: increase timeout to fix ehci failure + +Sometime during TLL reset and waiting loop for TLL reset timeouts and thus +ehci init fails. Fixing this by increasing timeout value. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> +--- + drivers/usb/host/ehci-omap.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 55e5259..c7631f5 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -244,7 +244,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) + */ + static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + { +- unsigned long timeout = jiffies + msecs_to_jiffies(100); ++ unsigned long timeout = jiffies + msecs_to_jiffies(1000); + unsigned reg = 0; + int ret = 0; + +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch b/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch new file mode 100644 index 0000000000..46258dac9b --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0007-ehci-portwise-configurations.patch @@ -0,0 +1,498 @@ +From 4d0b781b146ee79cee1208589498e8ac959d5796 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Thu, 13 Aug 2009 09:10:44 +0530 +Subject: [PATCH 07/16] ehci: portwise configurations + +OMAP3 EHCI has three ports and we can configure port modes +(PHY/TLL) on per port basis in silicon version ES3.0 onwards. + +This patch modifies the existing EHCI driver to accomodate +portwise mode configuration. + +Changes being done: + + - Pass platform_data pointer as parameter to usb_ehci_init() + to avoid multiple parameters. + - Use platform_data pointer in usb-ehci.c as platform_data + directly without copying it to another *pdata*. + - Initializing platform_data in all platform files with + platform specific ehci parameters. + - Added port_mode[OMAP_HS_USB_PORTS]in platform_data + structures.This allows to setup mux pins on per port basis. + - Added phy_reset_gpio[OMAP_HS_USB_PORTS]. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + arch/arm/mach-omap2/board-3430sdp.c | 15 +++++- + arch/arm/mach-omap2/board-omap3beagle.c | 15 +++++- + arch/arm/mach-omap2/board-omap3evm.c | 15 +++++- + arch/arm/mach-omap2/board-omap3pandora.c | 15 +++++- + arch/arm/mach-omap2/usb-ehci.c | 95 +++++++++++++++--------------- + arch/arm/plat-omap/include/mach/usb.h | 12 ++-- + drivers/usb/host/ehci-omap.c | 63 +++++++++++--------- + 7 files changed, 145 insertions(+), 85 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index 439ebcc..f9fabb0 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -480,6 +480,19 @@ static void enable_board_wakeup_source(void) + omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + } + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .chargepump = true, ++ .phy_reset = true, ++ .reset_gpio_port[0] = 57, ++ .reset_gpio_port[1] = 61, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap_3430sdp_init(void) + { + omap3430_i2c_init(); +@@ -495,8 +508,8 @@ static void __init omap_3430sdp_init(void) + omap_serial_init(); + usb_musb_init(); + board_smc91x_init(); +- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); + enable_board_wakeup_source(); ++ usb_ehci_init(&ehci_pdata); + } + + static void __init omap_3430sdp_map_io(void) +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index a661fe3..4109969 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -395,6 +395,19 @@ static void __init omap3beagle_flash_init(void) + } + } + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .chargepump = false, ++ .phy_reset = true, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = 147, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3_beagle_init(void) + { + omap3_beagle_i2c_init(); +@@ -408,7 +421,7 @@ static void __init omap3_beagle_init(void) + gpio_direction_output(170, true); + + usb_musb_init(); +- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, true, true, 57, 61); ++ usb_ehci_init(&ehci_pdata); + omap3beagle_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index 18b747b..62a6f32 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -293,6 +293,19 @@ static struct platform_device *omap3_evm_devices[] __initdata = { + &omap3evm_smc911x_device, + }; + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .chargepump = false, ++ .phy_reset = true, ++ .reset_gpio_port[0] = -EINVAL, ++ .reset_gpio_port[1] = 135, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3_evm_init(void) + { + omap3_evm_i2c_init(); +@@ -310,7 +323,7 @@ static void __init omap3_evm_init(void) + usb_musb_init(); + /* Setup EHCI phy reset padconfig */ + omap_cfg_reg(AF4_34XX_GPIO135_OUT); +- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, -EINVAL, 135); ++ usb_ehci_init(&ehci_pdata); + ads7846_dev_init(); + } + +diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c +index c9d6488..9f115dc 100644 +--- a/arch/arm/mach-omap2/board-omap3pandora.c ++++ b/arch/arm/mach-omap2/board-omap3pandora.c +@@ -383,6 +383,19 @@ static struct platform_device *omap3pandora_devices[] __initdata = { + &pandora_keys_gpio, + }; + ++static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { ++ ++ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, ++ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, ++ ++ .chargepump = false, ++ .phy_reset = true, ++ .reset_gpio_port[0] = 16, ++ .reset_gpio_port[1] = -EINVAL, ++ .reset_gpio_port[2] = -EINVAL ++}; ++ + static void __init omap3pandora_init(void) + { + omap3pandora_i2c_init(); +@@ -392,7 +405,7 @@ static void __init omap3pandora_init(void) + spi_register_board_info(omap3pandora_spi_board_info, + ARRAY_SIZE(omap3pandora_spi_board_info)); + omap3pandora_ads7846_init(); +- usb_ehci_init(EHCI_HCD_OMAP_MODE_PHY, false, true, 16, -EINVAL); ++ usb_ehci_init(&ehci_pdata); + pandora_keys_gpio_init(); + usb_musb_init(); + +diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c +index 6a96569..a29c8ca 100644 +--- a/arch/arm/mach-omap2/usb-ehci.c ++++ b/arch/arm/mach-omap2/usb-ehci.c +@@ -68,14 +68,10 @@ static struct platform_device ehci_device = { + /* + * setup_ehci_io_mux - initialize IO pad mux for USBHOST + */ +-static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) ++static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) + { +- if (phy_mode == EHCI_HCD_OMAP_MODE_PHY) { +- /* PHY mode of operation for board: 750-2083-001 +- * ISP1504 connected to Port1 and Port2 +- * Do Func Mux setting for 12-pin ULPI PHY mode +- */ +- /* Port1 */ ++ switch (port_mode[0]) { ++ case EHCI_HCD_OMAP_MODE_PHY: + omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); + omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); + omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); +@@ -88,28 +84,8 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) + omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); + omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); + omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); +- +- /* Port2 */ +- omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); +- omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); +- omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); +- omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); +- omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); +- omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); +- omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); +- omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); +- omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); +- omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); +- omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); +- omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); +- +- } else { +- /* Set Func mux for : +- * TLL mode of operation +- * 12-pin ULPI SDR TLL mode for Port1/2/3 +- */ +- +- /* Port1 */ ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); + omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); + omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); +@@ -122,8 +98,29 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) + omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); + omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); + omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; ++ } + +- /* Port2 */ ++ switch (port_mode[1]) { ++ case EHCI_HCD_OMAP_MODE_PHY: ++ omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); ++ omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); ++ omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); ++ omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); ++ omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); ++ omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); ++ omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); ++ omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); ++ omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); ++ omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); ++ omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); ++ omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); + omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); + omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); +@@ -136,8 +133,18 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) + omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); + omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); + omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; ++ } + +- /* Port3 */ ++ switch (port_mode[2]) { ++ case EHCI_HCD_OMAP_MODE_PHY: ++ printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); ++ break; ++ case EHCI_HCD_OMAP_MODE_TLL: + omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); + omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); + omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); +@@ -150,28 +157,23 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode phy_mode) + omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); + omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); + omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); ++ break; ++ case EHCI_HCD_OMAP_MODE_UNKNOWN: ++ /* FALLTHROUGH */ ++ default: ++ break; + } + + return; + } + +-static struct ehci_hcd_omap_platform_data pdata __initconst; +- +-void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, +- int chargepump, int phy_reset, int reset_gpio_port1, +- int reset_gpio_port2) ++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) + { +- pdata.phy_mode = phy_mode; +- pdata.chargepump = chargepump; +- pdata.phy_reset = phy_reset; +- pdata.reset_gpio_port1 = reset_gpio_port1; +- pdata.reset_gpio_port2 = reset_gpio_port2; +- +- platform_device_add_data(&ehci_device, &pdata, sizeof(pdata)); ++ platform_device_add_data(&ehci_device, pdata, sizeof(*pdata)); + + /* Setup Pin IO MUX for EHCI */ + if (cpu_is_omap34xx()) +- setup_ehci_io_mux(phy_mode); ++ setup_ehci_io_mux(pdata->port_mode); + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); +@@ -181,9 +183,8 @@ void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, + + #else + +-void __init usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, +- int chargepump, int phy_reset, int reset_gpio_port1, +- int reset_gpio_port2) ++void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata) ++ + { + } + +diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h +index 1b1366c..d1b14cc 100644 +--- a/arch/arm/plat-omap/include/mach/usb.h ++++ b/arch/arm/plat-omap/include/mach/usb.h +@@ -5,6 +5,7 @@ + + #include <mach/board.h> + ++#define OMAP3_HS_USB_PORTS 3 + enum ehci_hcd_omap_mode { + EHCI_HCD_OMAP_MODE_UNKNOWN, + EHCI_HCD_OMAP_MODE_PHY, +@@ -12,13 +13,12 @@ enum ehci_hcd_omap_mode { + }; + + struct ehci_hcd_omap_platform_data { +- enum ehci_hcd_omap_mode phy_mode; ++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; + unsigned chargepump:1; + unsigned phy_reset:1; + +- /* have to be valid if phy_reset is true */ +- int reset_gpio_port1; +- int reset_gpio_port2; ++ /* have to be valid if phy_reset is true and portx is in phy mode */ ++ int reset_gpio_port[OMAP3_HS_USB_PORTS]; + }; + + /*-------------------------------------------------------------------------*/ +@@ -45,9 +45,7 @@ struct ehci_hcd_omap_platform_data { + + extern void usb_musb_init(void); + +-extern void usb_ehci_init(enum ehci_hcd_omap_mode phy_mode, +- int chargepump, int phy_reset, int reset_gpio_port1, +- int reset_gpio_port2); ++extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata); + + #endif + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index c7631f5..3175122 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -162,8 +162,7 @@ struct ehci_hcd_omap { + */ + + /* gpio for resetting phy */ +- int reset_gpio_port1; +- int reset_gpio_port2; ++ int reset_gpio_port[OMAP3_HS_USB_PORTS]; + + /* phy reset workaround */ + int phy_reset; +@@ -172,7 +171,7 @@ struct ehci_hcd_omap { + int chargepump; + + /* desired phy_mode: TLL, PHY */ +- enum ehci_hcd_omap_mode phy_mode; ++ enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; + + void __iomem *uhh_base; + void __iomem *tll_base; +@@ -297,14 +296,16 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + + if (omap->phy_reset) { + /* Refer: ISSUE1 */ +- if (gpio_is_valid(omap->reset_gpio_port1)) { +- gpio_request(omap->reset_gpio_port1, "USB1 PHY reset"); +- gpio_direction_output(omap->reset_gpio_port1, 0); ++ if (gpio_is_valid(omap->reset_gpio_port[0])) { ++ gpio_request(omap->reset_gpio_port[0], ++ "USB1 PHY reset"); ++ gpio_direction_output(omap->reset_gpio_port[0], 0); + } + +- if (gpio_is_valid(omap->reset_gpio_port2)) { +- gpio_request(omap->reset_gpio_port2, "USB2 PHY reset"); +- gpio_direction_output(omap->reset_gpio_port2, 0); ++ if (gpio_is_valid(omap->reset_gpio_port[1])) { ++ gpio_request(omap->reset_gpio_port[1], ++ "USB2 PHY reset"); ++ gpio_direction_output(omap->reset_gpio_port[1], 0); + } + + /* Hold the PHY in RESET for enough time till DIR is high */ +@@ -361,7 +362,10 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + + ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + +- if (omap->phy_mode == EHCI_HCD_OMAP_MODE_PHY) { ++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) { ++ + reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); + + reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN +@@ -374,7 +378,9 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); + dev_dbg(omap->dev, "Entered ULPI PHY MODE: success\n"); + +- } else if (omap->phy_mode == EHCI_HCD_OMAP_MODE_TLL) { ++ } else if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { + + /* Enable UTMI mode for all 3 TLL channels */ + omap_usb_utmi_init(omap, +@@ -396,11 +402,11 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + */ + udelay(10); + +- if (gpio_is_valid(omap->reset_gpio_port1)) +- gpio_set_value(omap->reset_gpio_port1, 1); ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_set_value(omap->reset_gpio_port[0], 1); + +- if (gpio_is_valid(omap->reset_gpio_port2)) +- gpio_set_value(omap->reset_gpio_port2, 1); ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_set_value(omap->reset_gpio_port[1], 1); + } + + if (omap->chargepump) { +@@ -438,11 +444,11 @@ err_tll_fck: + clk_put(omap->usbhost1_48m_fck); + + if (omap->phy_reset) { +- if (gpio_is_valid(omap->reset_gpio_port1)) +- gpio_free(omap->reset_gpio_port1); ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_free(omap->reset_gpio_port[0]); + +- if (gpio_is_valid(omap->reset_gpio_port2)) +- gpio_free(omap->reset_gpio_port2); ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_free(omap->reset_gpio_port[1]); + } + + err_host_48m_fck: +@@ -531,11 +537,11 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + } + + if (omap->phy_reset) { +- if (gpio_is_valid(omap->reset_gpio_port1)) +- gpio_free(omap->reset_gpio_port1); ++ if (gpio_is_valid(omap->reset_gpio_port[0])) ++ gpio_free(omap->reset_gpio_port[0]); + +- if (gpio_is_valid(omap->reset_gpio_port2)) +- gpio_free(omap->reset_gpio_port2); ++ if (gpio_is_valid(omap->reset_gpio_port[1])) ++ gpio_free(omap->reset_gpio_port[1]); + } + + dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); +@@ -590,10 +596,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) + platform_set_drvdata(pdev, omap); + omap->dev = &pdev->dev; + omap->phy_reset = pdata->phy_reset; +- omap->reset_gpio_port1 = pdata->reset_gpio_port1; +- omap->reset_gpio_port2 = pdata->reset_gpio_port2; +- omap->phy_mode = pdata->phy_mode; +- omap->chargepump = pdata->chargepump; ++ omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; ++ omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; ++ omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; ++ omap->port_mode[0] = pdata->port_mode[0]; ++ omap->port_mode[1] = pdata->port_mode[1]; ++ omap->port_mode[2] = pdata->port_mode[2]; ++ omap->chargepump = pdata->chargepump; + omap->ehci = hcd_to_ehci(hcd); + omap->ehci->sbrn = 0x20; + +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0008-omap3-Add-CHIP_GE_OMAP3430ES3-for-HSUSB.patch b/recipes/linux/linux-omap-2.6.31/usb/0008-omap3-Add-CHIP_GE_OMAP3430ES3-for-HSUSB.patch new file mode 100644 index 0000000000..25764aa52c --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0008-omap3-Add-CHIP_GE_OMAP3430ES3-for-HSUSB.patch @@ -0,0 +1,41 @@ +From 073182af5855d4114ab3d40db3fba1298573f0be Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 10 Jul 2009 12:15:04 +0530 +Subject: [PATCH 08/16] omap3: Add CHIP_GE_OMAP3430ES3 for HSUSB + +OMAP3 HSUSB ports can be individually programmed in PHY or TLL +mode in ES3.0 onwards whereas this is not supported in ES2.1 +and earlier versions. + +CHIP_GE_OMAP3430ES3 is added to program this behavior at runtime. + +Also updated the existing macros to use the priviously defined +*_GE_* logic instead of repeating the same logic again. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + arch/arm/plat-omap/include/mach/cpu.h | 7 ++++--- + 1 files changed, 4 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h +index 7a5f9e8..60d867c 100644 +--- a/arch/arm/plat-omap/include/mach/cpu.h ++++ b/arch/arm/plat-omap/include/mach/cpu.h +@@ -414,10 +414,11 @@ IS_OMAP_TYPE(3430, 0x3430) + * chips at ES2 and beyond, but not, for example, any OMAP lines after + * OMAP3. + */ +-#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ +- CHIP_IS_OMAP3430ES3_0 | \ +- CHIP_IS_OMAP3430ES3_1) + #define CHIP_GE_OMAP3430ES3_1 (CHIP_IS_OMAP3430ES3_1) ++#define CHIP_GE_OMAP3430ES3 (CHIP_IS_OMAP3430ES3_0 | \ ++ CHIP_GE_OMAP3430ES3_1) ++#define CHIP_GE_OMAP3430ES2 (CHIP_IS_OMAP3430ES2 | \ ++ CHIP_GE_OMAP3430ES3) + + + int omap_chip_is(struct omap_chip_id oci); +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch b/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch new file mode 100644 index 0000000000..bd29031f1c --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0009-ehci-Support-for-ES3.x.patch @@ -0,0 +1,170 @@ +From 2caa398b8d7d37ecbf062fd36c54ed6807e3ab5b Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Mon, 13 Jul 2009 14:13:26 +0530 +Subject: [PATCH 09/16] ehci: Support for ES3.x + +OMAP ES3.x supports portwise PHY or TLL mode of operation whereas +in ES2.x all the three ports can either be in PHY mode or in TLL +mode.Port3 can not be configured in PHY mode. + +Port mode must be defined either PHY, TLL or UNKNOWN in platform +files.Be careful of the scenario where one port is set as PHY and +other in TLL but the OMAP silicon version is 2.x or earlier where +this scenario is *not* supported. + +Changes are : + - Setup all the bypass configuration in omap_start_ehc() + based on ES version. + - Remove UHH_HOSTCONFIG programming for bypass settings + in omap_usb_utmi_init() + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/host/ehci-omap.c | 90 ++++++++++++++++++++++++------------------ + 1 files changed, 52 insertions(+), 38 deletions(-) + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 3175122..81a0b65 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -32,7 +32,6 @@ + * - move DPLL5 programming to clock fw + * - add suspend/resume + * - move workarounds to board-files +- * - differentiate between ES2.x and ES3.x + */ + + #include <linux/platform_device.h> +@@ -102,6 +101,9 @@ + #define OMAP_UHH_SYSSTATUS (0x14) + #define OMAP_UHH_HOSTCONFIG (0x40) + #define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) ++#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) + #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) + #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) + #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) +@@ -185,16 +187,6 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) + unsigned reg; + int i; + +- reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); +- reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS +- | OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN +- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN +- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN; +- reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; +- +- /* Use UTMI Ports of TLL */ +- ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); +- + /* Program the 3 TLL channels upfront */ + for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { + reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); +@@ -243,7 +235,9 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) + */ + static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + { ++ struct omap_chip_id oci = OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES3); + unsigned long timeout = jiffies + msecs_to_jiffies(1000); ++ u8 tll_ch_mask = 0; + unsigned reg = 0; + int ret = 0; + +@@ -362,37 +356,58 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + + ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + +- if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || +- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || +- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) { ++ reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); + +- reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); ++ /* setup ULPI bypass and burst configurations */ ++ reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN ++ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN ++ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); ++ reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; + +- reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN +- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN +- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); +- reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_BYPASS +- | OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN); ++ /* Bypass the TLL module for PHY mode operation */ ++ if (omap_chip_is(oci)) { ++ dev_dbg(omap->dev, "OMAP3 ES version > ES3\n"); ++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; ++ else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + +- /* Bypass the TLL module for PHY mode operation */ +- ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); +- dev_dbg(omap->dev, "Entered ULPI PHY MODE: success\n"); ++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; ++ else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; ++ ++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; ++ else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; + +- } else if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || +- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || +- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { +- +- /* Enable UTMI mode for all 3 TLL channels */ +- omap_usb_utmi_init(omap, +- OMAP_TLL_CHANNEL_1_EN_MASK | +- OMAP_TLL_CHANNEL_2_EN_MASK | +- OMAP_TLL_CHANNEL_3_EN_MASK +- ); + } else { +- dev_err(hcd->self.controller, +- "UNKOWN mode requested\n"); +- ret = -EINVAL; +- goto err_unknown_mode; ++ dev_dbg(omap->dev, "OMAP3 ES version < ES3\n"); ++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)) ++ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; ++ else ++ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; ++ } ++ ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); ++ dev_dbg(omap->dev, "UHH setup done, uhh_base=%x\n", reg); ++ ++ ++ if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || ++ (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { ++ ++ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; ++ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; ++ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) ++ tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; ++ ++ /* Enable UTMI mode for required TLL channels */ ++ omap_usb_utmi_init(omap, tll_ch_mask); + } + + if (omap->phy_reset) { +@@ -430,7 +445,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) + + return 0; + +-err_unknown_mode: + err_sys_status: + clk_disable(omap->usbtll_ick); + clk_put(omap->usbtll_ick); +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch b/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch new file mode 100644 index 0000000000..c517931edd --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0010-ehci-update-driver-with-generic-change.patch @@ -0,0 +1,31 @@ +From 4ad1dd4ce8c9c04c2fbfad72a78247d848090329 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 10 Jul 2009 19:46:20 +0530 +Subject: [PATCH 10/16] ehci: update driver with generic change + +Update the OMAP EHCI driver in accordance with below patch +introduced in generic EHCI driver. + +commit: b18ffd49e86102a9ed0a1cc83fdafe3891e844e5 +USB: EHCI: update toggle state for linked QHs + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/host/ehci-omap.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 81a0b65..8b944d7 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -761,6 +761,7 @@ static const struct hc_driver ehci_omap_hc_driver = { + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, ++ .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0011-musb-fix-musb-gadget_driver-NULL-bug.patch b/recipes/linux/linux-omap-2.6.31/usb/0011-musb-fix-musb-gadget_driver-NULL-bug.patch new file mode 100644 index 0000000000..0d74743ac0 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0011-musb-fix-musb-gadget_driver-NULL-bug.patch @@ -0,0 +1,31 @@ +From 1adaab4805926b3674fd083e7e0ac2b29a30a34a Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 12 Jun 2009 19:01:42 +0530 +Subject: [PATCH 11/16] musb: fix musb->gadget_driver != NULL bug + +musb->gadget_driver != NULL is observed when CONFIG_SUSPEND is +enabled causing failure in gadget driver registration. + +Fixing this by making musb->gadget_driver = NULL during musb +initialization. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/musb/musb_gadget.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index 8b3c4e2..d69d98e 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -1650,6 +1650,7 @@ int __init musb_gadget_setup(struct musb *musb) + musb->g.dev.dma_mask = musb->controller->dma_mask; + musb->g.dev.release = musb_gadget_release; + musb->g.name = musb_driver_name; ++ musb->gadget_driver = NULL; + + if (is_otg_enabled(musb)) + musb->g.is_otg = 1; +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0012-musb-Add-back-old-musb-procfs-file.patch b/recipes/linux/linux-omap-2.6.31/usb/0012-musb-Add-back-old-musb-procfs-file.patch new file mode 100644 index 0000000000..bc1ad5a648 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0012-musb-Add-back-old-musb-procfs-file.patch @@ -0,0 +1,947 @@ +From 7f43c6297c781c2d403ee397fe2cfccaaf3eea42 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Sat, 20 Jun 2009 14:06:38 +0530 +Subject: [PATCH 12/16] musb: Add back old musb procfs file + +Procfs file is removed from musb and an equivalent debugfs is +expected to replace it. + +Adding the old file back to retain the debug functionalities untill +we get debugfs equivalent in mainline. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/musb/Makefile | 3 + + drivers/usb/musb/musb_core.c | 8 +- + drivers/usb/musb/musb_core.h | 19 + + drivers/usb/musb/musb_procfs.c | 838 ++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 863 insertions(+), 5 deletions(-) + create mode 100644 drivers/usb/musb/musb_procfs.c + +diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile +index 85710cc..06969c5 100644 +--- a/drivers/usb/musb/Makefile ++++ b/drivers/usb/musb/Makefile +@@ -74,4 +74,7 @@ endif + + ifeq ($(CONFIG_USB_MUSB_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG ++ ifeq ($(CONFIG_PROC_FS),y) ++ musb_hdrc-objs += musb_procfs.o ++ endif + endif +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index 129f9dc..f5ca435 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -2046,8 +2046,6 @@ bad_config: + musb->xceiv->state = OTG_STATE_A_IDLE; + + status = usb_add_hcd(musb_to_hcd(musb), -1, 0); +- if (status) +- goto fail; + + DBG(1, "%s mode, status %d, devctl %02x %c\n", + "HOST", status, +@@ -2062,8 +2060,6 @@ bad_config: + musb->xceiv->state = OTG_STATE_B_IDLE; + + status = musb_gadget_setup(musb); +- if (status) +- goto fail; + + DBG(1, "%s mode, status %d, dev%02x\n", + is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", +@@ -2082,7 +2078,8 @@ bad_config: + #endif + if (status) + goto fail2; +- ++ if (status == 0) ++ musb_debug_create("driver/musb_hdrc", musb); + return 0; + + fail2: +@@ -2152,6 +2149,7 @@ static int __devexit musb_remove(struct platform_device *pdev) + * - OTG mode: both roles are deactivated (or never-activated) + */ + musb_shutdown(pdev); ++ musb_debug_delete("driver/musb_hdrc", musb); + #ifdef CONFIG_USB_MUSB_HDRC_HCD + if (musb->board_mode == MUSB_HOST) + usb_remove_hcd(musb_to_hcd(musb)); +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index 381d648..b0b4fbd 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -562,4 +562,23 @@ extern int musb_platform_get_vbus_status(struct musb *musb); + extern int __init musb_platform_init(struct musb *musb); + extern int musb_platform_exit(struct musb *musb); + ++/*-------------------------- ProcFS definitions ---------------------*/ ++ ++struct proc_dir_entry; ++ ++#if (CONFIG_USB_MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS) ++extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data); ++extern void musb_debug_delete(char *name, struct musb *data); ++ ++#else ++static inline struct proc_dir_entry * ++musb_debug_create(char *name, struct musb *data) ++{ ++ return NULL; ++} ++static inline void musb_debug_delete(char *name, struct musb *data) ++{ ++} ++#endif ++ + #endif /* __MUSB_CORE_H__ */ +diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c +new file mode 100644 +index 0000000..d789d4d +--- /dev/null ++++ b/drivers/usb/musb/musb_procfs.c +@@ -0,0 +1,838 @@ ++/* ++ * MUSB OTG driver debug support ++ * ++ * Copyright 2005 Mentor Graphics Corporation ++ * Copyright (C) 2005-2006 by Texas Instruments ++ * Copyright (C) 2006-2007 Nokia Corporation ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/proc_fs.h> ++#include <linux/seq_file.h> ++#include <linux/uaccess.h> /* FIXME remove procfs writes */ ++#include <mach/hardware.h> ++ ++#include "musb_core.h" ++ ++#include "davinci.h" ++ ++#ifdef CONFIG_USB_MUSB_HDRC_HCD ++ ++static int dump_qh(struct musb_qh *qh, char *buf, unsigned max) ++{ ++ int count; ++ int tmp; ++ struct usb_host_endpoint *hep = qh->hep; ++ struct urb *urb; ++ ++ count = snprintf(buf, max, " qh %p dev%d ep%d%s max%d\n", ++ qh, qh->dev->devnum, qh->epnum, ++ ({ char *s; switch (qh->type) { ++ case USB_ENDPOINT_XFER_BULK: ++ s = "-bulk"; break; ++ case USB_ENDPOINT_XFER_INT: ++ s = "-int"; break; ++ case USB_ENDPOINT_XFER_CONTROL: ++ s = ""; break; ++ default: ++ s = "iso"; break; ++ }; s; }), ++ qh->maxpacket); ++ if (count <= 0) ++ return 0; ++ buf += count; ++ max -= count; ++ ++ list_for_each_entry(urb, &hep->urb_list, urb_list) { ++ tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n", ++ usb_pipein(urb->pipe) ? "in" : "out", ++ urb, urb->actual_length, ++ urb->transfer_buffer_length); ++ if (tmp <= 0) ++ break; ++ tmp = min(tmp, (int)max); ++ count += tmp; ++ buf += tmp; ++ max -= tmp; ++ } ++ return count; ++} ++ ++static int ++dump_queue(struct list_head *q, char *buf, unsigned max) ++{ ++ int count = 0; ++ struct musb_qh *qh; ++ ++ list_for_each_entry(qh, q, ring) { ++ int tmp; ++ ++ tmp = dump_qh(qh, buf, max); ++ if (tmp <= 0) ++ break; ++ tmp = min(tmp, (int)max); ++ count += tmp; ++ buf += tmp; ++ max -= tmp; ++ } ++ return count; ++} ++ ++#endif /* HCD */ ++ ++#ifdef CONFIG_USB_GADGET_MUSB_HDRC ++static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max) ++{ ++ char *buf = buffer; ++ int code = 0; ++ void __iomem *regs = ep->hw_ep->regs; ++ char *mode = "1buf"; ++ ++ if (ep->is_in) { ++ if (ep->hw_ep->tx_double_buffered) ++ mode = "2buf"; ++ } else { ++ if (ep->hw_ep->rx_double_buffered) ++ mode = "2buf"; ++ } ++ ++ do { ++ struct usb_request *req; ++ ++ code = snprintf(buf, max, ++ "\n%s (hw%d): %s%s, csr %04x maxp %04x\n", ++ ep->name, ep->current_epnum, ++ mode, ep->dma ? " dma" : "", ++ musb_readw(regs, ++ (ep->is_in || !ep->current_epnum) ++ ? MUSB_TXCSR ++ : MUSB_RXCSR), ++ musb_readw(regs, ep->is_in ++ ? MUSB_TXMAXP ++ : MUSB_RXMAXP) ++ ); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ ++ if (is_cppi_enabled() && ep->current_epnum) { ++ unsigned cppi = ep->current_epnum - 1; ++ void __iomem *base = ep->musb->ctrl_base; ++ unsigned off1 = cppi << 2; ++ void __iomem *ram = base; ++ char tmp[16]; ++ ++ if (ep->is_in) { ++ ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi); ++ tmp[0] = 0; ++ } else { ++ ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi); ++ snprintf(tmp, sizeof tmp, "%d left, ", ++ musb_readl(base, ++ DAVINCI_RXCPPI_BUFCNT0_REG + off1)); ++ } ++ ++ code = snprintf(buf, max, "%cX DMA%d: %s" ++ "%08x %08x, %08x %08x; " ++ "%08x %08x %08x .. %08x\n", ++ ep->is_in ? 'T' : 'R', ++ ep->current_epnum - 1, tmp, ++ musb_readl(ram, 0 * 4), ++ musb_readl(ram, 1 * 4), ++ musb_readl(ram, 2 * 4), ++ musb_readl(ram, 3 * 4), ++ musb_readl(ram, 4 * 4), ++ musb_readl(ram, 5 * 4), ++ musb_readl(ram, 6 * 4), ++ musb_readl(ram, 7 * 4)); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ ++ if (list_empty(&ep->req_list)) { ++ code = snprintf(buf, max, "\t(queue empty)\n"); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ break; ++ } ++ list_for_each_entry(req, &ep->req_list, list) { ++ code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n", ++ req, ++ req->zero ? "zero, " : "", ++ req->short_not_ok ? "!short, " : "", ++ req->actual, req->length); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ } while (0); ++ return buf - buffer; ++} ++#endif ++ ++static int ++dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max) ++{ ++ int code = 0; ++ char *buf = aBuffer; ++ struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; ++ ++ do { ++ musb_ep_select(musb->mregs, epnum); ++#ifdef CONFIG_USB_MUSB_HDRC_HCD ++ if (is_host_active(musb)) { ++ int dump_rx, dump_tx; ++ void __iomem *regs = hw_ep->regs; ++ ++ /* TEMPORARY (!) until we have a real periodic ++ * schedule tree ... ++ */ ++ if (!epnum) { ++ /* control is shared, uses RX queue ++ * but (mostly) shadowed tx registers ++ */ ++ dump_tx = !list_empty(&musb->control); ++ dump_rx = 0; ++ } else if (hw_ep == musb->bulk_ep) { ++ dump_tx = !list_empty(&musb->out_bulk); ++ dump_rx = !list_empty(&musb->in_bulk); ++ } else if (hw_ep->in_qh || hw_ep->out_qh) { ++ if (hw_ep->in_qh) ++ dump_rx = 1; ++ else ++ dump_rx = 0; ++ dump_tx = !dump_rx; ++ } else ++ break; ++ /* END TEMPORARY */ ++ ++ ++ if (dump_rx) { ++ code = snprintf(buf, max, ++ "\nRX%d: %s rxcsr %04x interval %02x " ++ "max %04x type %02x; " ++ "dev %d hub %d port %d" ++ "\n", ++ epnum, ++ hw_ep->rx_double_buffered ++ ? "2buf" : "1buf", ++ musb_readw(regs, MUSB_RXCSR), ++ musb_readb(regs, MUSB_RXINTERVAL), ++ musb_readw(regs, MUSB_RXMAXP), ++ musb_readb(regs, MUSB_RXTYPE), ++ /* FIXME: assumes multipoint */ ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_RXFUNCADDR)), ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_RXHUBADDR)), ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_RXHUBPORT)) ++ ); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ ++ if (is_cppi_enabled() ++ && epnum ++ && hw_ep->rx_channel) { ++ unsigned cppi = epnum - 1; ++ unsigned off1 = cppi << 2; ++ void __iomem *base; ++ void __iomem *ram; ++ char tmp[16]; ++ ++ base = musb->ctrl_base; ++ ram = DAVINCI_RXCPPI_STATERAM_OFFSET( ++ cppi) + base; ++ snprintf(tmp, sizeof tmp, "%d left, ", ++ musb_readl(base, ++ DAVINCI_RXCPPI_BUFCNT0_REG ++ + off1)); ++ ++ code = snprintf(buf, max, ++ " rx dma%d: %s" ++ "%08x %08x, %08x %08x; " ++ "%08x %08x %08x .. %08x\n", ++ cppi, tmp, ++ musb_readl(ram, 0 * 4), ++ musb_readl(ram, 1 * 4), ++ musb_readl(ram, 2 * 4), ++ musb_readl(ram, 3 * 4), ++ musb_readl(ram, 4 * 4), ++ musb_readl(ram, 5 * 4), ++ musb_readl(ram, 6 * 4), ++ musb_readl(ram, 7 * 4)); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ ++ if (hw_ep == musb->bulk_ep ++ && !list_empty( ++ &musb->in_bulk)) { ++ code = dump_queue(&musb->in_bulk, ++ buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } else if (hw_ep->in_qh) { ++ code = dump_qh(hw_ep->in_qh, ++ buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ } ++ ++ if (dump_tx) { ++ code = snprintf(buf, max, ++ "\nTX%d: %s txcsr %04x interval %02x " ++ "max %04x type %02x; " ++ "dev %d hub %d port %d" ++ "\n", ++ epnum, ++ hw_ep->tx_double_buffered ++ ? "2buf" : "1buf", ++ musb_readw(regs, MUSB_TXCSR), ++ musb_readb(regs, MUSB_TXINTERVAL), ++ musb_readw(regs, MUSB_TXMAXP), ++ musb_readb(regs, MUSB_TXTYPE), ++ /* FIXME: assumes multipoint */ ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_TXFUNCADDR)), ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_TXHUBADDR)), ++ musb_readb(musb->mregs, ++ MUSB_BUSCTL_OFFSET(epnum, ++ MUSB_TXHUBPORT)) ++ ); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ ++ if (is_cppi_enabled() ++ && epnum ++ && hw_ep->tx_channel) { ++ unsigned cppi = epnum - 1; ++ void __iomem *base; ++ void __iomem *ram; ++ ++ base = musb->ctrl_base; ++ ram = DAVINCI_RXCPPI_STATERAM_OFFSET( ++ cppi) + base; ++ code = snprintf(buf, max, ++ " tx dma%d: " ++ "%08x %08x, %08x %08x; " ++ "%08x %08x %08x .. %08x\n", ++ cppi, ++ musb_readl(ram, 0 * 4), ++ musb_readl(ram, 1 * 4), ++ musb_readl(ram, 2 * 4), ++ musb_readl(ram, 3 * 4), ++ musb_readl(ram, 4 * 4), ++ musb_readl(ram, 5 * 4), ++ musb_readl(ram, 6 * 4), ++ musb_readl(ram, 7 * 4)); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ ++ if (hw_ep == musb->control_ep ++ && !list_empty( ++ &musb->control)) { ++ code = dump_queue(&musb->control, ++ buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } else if (hw_ep == musb->bulk_ep ++ && !list_empty( ++ &musb->out_bulk)) { ++ code = dump_queue(&musb->out_bulk, ++ buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } else if (hw_ep->out_qh) { ++ code = dump_qh(hw_ep->out_qh, ++ buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ } ++ } ++#endif ++#ifdef CONFIG_USB_GADGET_MUSB_HDRC ++ if (is_peripheral_active(musb)) { ++ code = 0; ++ ++ if (hw_ep->ep_in.desc || !epnum) { ++ code = dump_ep(&hw_ep->ep_in, buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ if (hw_ep->ep_out.desc) { ++ code = dump_ep(&hw_ep->ep_out, buf, max); ++ if (code <= 0) ++ break; ++ code = min(code, (int) max); ++ buf += code; ++ max -= code; ++ } ++ } ++#endif ++ } while (0); ++ ++ return buf - aBuffer; ++} ++ ++/* Dump the current status and compile options. ++ * @param musb the device driver instance ++ * @param buffer where to dump the status; it must be big enough to hold the ++ * result otherwise "BAD THINGS HAPPENS(TM)". ++ */ ++static int dump_header_stats(struct musb *musb, char *buffer) ++{ ++ int code, count = 0; ++ const void __iomem *mbase = musb->mregs; ++ ++ *buffer = 0; ++ count = sprintf(buffer, "Status: %sHDRC, Mode=%s " ++ "(Power=%02x, DevCtl=%02x)\n", ++ (musb->is_multipoint ? "M" : ""), MUSB_MODE(musb), ++ musb_readb(mbase, MUSB_POWER), ++ musb_readb(mbase, MUSB_DEVCTL)); ++ if (count <= 0) ++ return 0; ++ buffer += count; ++ ++ code = sprintf(buffer, "OTG state: %s; %sactive\n", ++ otg_state_string(musb), ++ musb->is_active ? "" : "in"); ++ if (code <= 0) ++ goto done; ++ buffer += code; ++ count += code; ++ ++ code = sprintf(buffer, ++ "Options: " ++#ifdef CONFIG_MUSB_PIO_ONLY ++ "pio" ++#elif defined(CONFIG_USB_TI_CPPI_DMA) ++ "cppi-dma" ++#elif defined(CONFIG_USB_INVENTRA_DMA) ++ "musb-dma" ++#elif defined(CONFIG_USB_TUSB_OMAP_DMA) ++ "tusb-omap-dma" ++#else ++ "?dma?" ++#endif ++ ", " ++#ifdef CONFIG_USB_MUSB_OTG ++ "otg (peripheral+host)" ++#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) ++ "peripheral" ++#elif defined(CONFIG_USB_MUSB_HDRC_HCD) ++ "host" ++#endif ++ ", debug=%d [eps=%d]\n", ++ musb_debug, ++ musb->nr_endpoints); ++ if (code <= 0) ++ goto done; ++ count += code; ++ buffer += code; ++ ++#ifdef CONFIG_USB_GADGET_MUSB_HDRC ++ code = sprintf(buffer, "Peripheral address: %02x\n", ++ musb_readb(musb->ctrl_base, MUSB_FADDR)); ++ if (code <= 0) ++ goto done; ++ buffer += code; ++ count += code; ++#endif ++ ++#ifdef CONFIG_USB_MUSB_HDRC_HCD ++ code = sprintf(buffer, "Root port status: %08x\n", ++ musb->port1_status); ++ if (code <= 0) ++ goto done; ++ buffer += code; ++ count += code; ++#endif ++ ++#ifdef CONFIG_ARCH_DAVINCI ++ code = sprintf(buffer, ++ "DaVinci: ctrl=%02x stat=%1x phy=%03x\n" ++ "\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x" ++ "\n", ++ musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG), ++ musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG), ++ __raw_readl((void __force __iomem *) ++ IO_ADDRESS(USBPHY_CTL_PADDR)), ++ musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG), ++ musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_USB_INT_SOURCE_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_USB_INT_MASK_REG)); ++ if (code <= 0) ++ goto done; ++ count += code; ++ buffer += code; ++#endif /* DAVINCI */ ++ ++#ifdef CONFIG_USB_TUSB6010 ++ code = sprintf(buffer, ++ "TUSB6010: devconf %08x, phy enable %08x drive %08x" ++ "\n\totg %03x timer %08x" ++ "\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x" ++ "\n", ++ musb_readl(musb->ctrl_base, TUSB_DEV_CONF), ++ musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE), ++ musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL), ++ musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT), ++ musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER), ++ musb_readl(musb->ctrl_base, TUSB_PRCM_CONF), ++ musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT), ++ musb_readl(musb->ctrl_base, TUSB_INT_SRC), ++ musb_readl(musb->ctrl_base, TUSB_INT_MASK)); ++ if (code <= 0) ++ goto done; ++ count += code; ++ buffer += code; ++#endif /* DAVINCI */ ++ ++ if (is_cppi_enabled() && musb->dma_controller) { ++ code = sprintf(buffer, ++ "CPPI: txcr=%d txsrc=%01x txena=%01x; " ++ "rxcr=%d rxsrc=%01x rxena=%01x " ++ "\n", ++ musb_readl(musb->ctrl_base, ++ DAVINCI_TXCPPI_CTRL_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_TXCPPI_RAW_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_TXCPPI_INTENAB_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_RXCPPI_CTRL_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_RXCPPI_RAW_REG), ++ musb_readl(musb->ctrl_base, ++ DAVINCI_RXCPPI_INTENAB_REG)); ++ if (code <= 0) ++ goto done; ++ count += code; ++ buffer += code; ++ } ++ ++#ifdef CONFIG_USB_GADGET_MUSB_HDRC ++ if (is_peripheral_enabled(musb)) { ++ code = sprintf(buffer, "Gadget driver: %s\n", ++ musb->gadget_driver ++ ? musb->gadget_driver->driver.name ++ : "(none)"); ++ if (code <= 0) ++ goto done; ++ count += code; ++ buffer += code; ++ } ++#endif ++ ++done: ++ return count; ++} ++ ++/* Write to ProcFS ++ * ++ * C soft-connect ++ * c soft-disconnect ++ * I enable HS ++ * i disable HS ++ * s stop session ++ * F force session (OTG-unfriendly) ++ * E rElinquish bus (OTG) ++ * H request host mode ++ * h cancel host request ++ * T start sending TEST_PACKET ++ * D<num> set/query the debug level ++ */ ++static int musb_proc_write(struct file *file, const char __user *buffer, ++ unsigned long count, void *data) ++{ ++ char cmd; ++ u8 reg; ++ struct musb *musb = (struct musb *)data; ++ void __iomem *mbase = musb->mregs; ++ ++ /* MOD_INC_USE_COUNT; */ ++ ++ if (unlikely(copy_from_user(&cmd, buffer, 1))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case 'S': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_POWER) ++ | MUSB_POWER_SUSPENDM; ++ musb_writeb(mbase, MUSB_POWER, reg); ++ } ++ break; ++ ++ case 'C': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_POWER) ++ | MUSB_POWER_SOFTCONN; ++ musb_writeb(mbase, MUSB_POWER, reg); ++ } ++ break; ++ ++ case 'c': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_POWER) ++ & ~MUSB_POWER_SOFTCONN; ++ musb_writeb(mbase, MUSB_POWER, reg); ++ } ++ break; ++ ++ case 'I': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_POWER) ++ | MUSB_POWER_HSENAB; ++ musb_writeb(mbase, MUSB_POWER, reg); ++ } ++ break; ++ ++ case 'i': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_POWER) ++ & ~MUSB_POWER_HSENAB; ++ musb_writeb(mbase, MUSB_POWER, reg); ++ } ++ break; ++ ++ case 'F': ++ reg = musb_readb(mbase, MUSB_DEVCTL); ++ reg |= MUSB_DEVCTL_SESSION; ++ musb_writeb(mbase, MUSB_DEVCTL, reg); ++ break; ++ ++ case 'H': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_DEVCTL); ++ reg |= MUSB_DEVCTL_HR; ++ musb_writeb(mbase, MUSB_DEVCTL, reg); ++ /* MUSB_HST_MODE( ((struct musb*)data) ); */ ++ /* WARNING("Host Mode\n"); */ ++ } ++ break; ++ ++ case 'h': ++ if (mbase) { ++ reg = musb_readb(mbase, MUSB_DEVCTL); ++ reg &= ~MUSB_DEVCTL_HR; ++ musb_writeb(mbase, MUSB_DEVCTL, reg); ++ } ++ break; ++ ++ case 'T': ++ if (mbase) { ++ musb_load_testpacket(musb); ++ musb_writeb(mbase, MUSB_TESTMODE, ++ MUSB_TEST_PACKET); ++ } ++ break; ++ ++#if (CONFIG_USB_MUSB_DEBUG > 0) ++ /* set/read debug level */ ++ case 'D':{ ++ if (count > 1) { ++ char digits[8], *p = digits; ++ int i = 0, level = 0, sign = 1; ++ int len = min(count - 1, (unsigned long)8); ++ ++ if (copy_from_user(&digits, &buffer[1], len)) ++ return -EFAULT; ++ ++ /* optional sign */ ++ if (*p == '-') { ++ len -= 1; ++ sign = -sign; ++ p++; ++ } ++ ++ /* read it */ ++ while (i++ < len && *p > '0' && *p < '9') { ++ level = level * 10 + (*p - '0'); ++ p++; ++ } ++ ++ level *= sign; ++ DBG(1, "debug level %d\n", level); ++ musb_debug = level; ++ } ++ } ++ break; ++ ++ ++ case '?': ++ INFO("?: you are seeing it\n"); ++ INFO("S: suspend the usb bus\n"); ++ INFO("C/c: soft connect enable/disable\n"); ++ INFO("I/i: hispeed enable/disable\n"); ++ INFO("F: force session start\n"); ++ INFO("H: host mode\n"); ++ INFO("T: start sending TEST_PACKET\n"); ++ INFO("D: set/read dbug level\n"); ++ break; ++#endif ++ ++ default: ++ ERR("Command %c not implemented\n", cmd); ++ break; ++ } ++ ++ musb_platform_try_idle(musb, 0); ++ ++ return count; ++} ++ ++static int musb_proc_read(char *page, char **start, ++ off_t off, int count, int *eof, void *data) ++{ ++ char *buffer = page; ++ int code = 0; ++ unsigned long flags; ++ struct musb *musb = data; ++ unsigned epnum; ++ ++ count -= off; ++ count -= 1; /* for NUL at end */ ++ if (count <= 0) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&musb->lock, flags); ++ ++ code = dump_header_stats(musb, buffer); ++ if (code > 0) { ++ buffer += code; ++ count -= code; ++ } ++ ++ /* generate the report for the end points */ ++ /* REVISIT ... not unless something's connected! */ ++ for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints; ++ epnum++) { ++ code = dump_end_info(musb, epnum, buffer, count); ++ if (code > 0) { ++ buffer += code; ++ count -= code; ++ } ++ } ++ ++ musb_platform_try_idle(musb, 0); ++ ++ spin_unlock_irqrestore(&musb->lock, flags); ++ *eof = 1; ++ ++ return buffer - page; ++} ++ ++void __devexit musb_debug_delete(char *name, struct musb *musb) ++{ ++ if (musb->proc_entry) ++ remove_proc_entry(name, NULL); ++} ++ ++struct proc_dir_entry *__init ++musb_debug_create(char *name, struct musb *data) ++{ ++ struct proc_dir_entry *pde; ++ ++ /* FIXME convert everything to seq_file; then later, debugfs */ ++ ++ if (!name) ++ return NULL; ++ ++ pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL); ++ data->proc_entry = pde; ++ if (pde) { ++ pde->data = data; ++ /* pde->owner = THIS_MODULE; */ ++ ++ pde->read_proc = musb_proc_read; ++ pde->write_proc = musb_proc_write; ++ ++ pde->size = 0; ++ ++ pr_debug("Registered /proc/%s\n", name); ++ } else { ++ pr_debug("Cannot create a valid proc file entry"); ++ } ++ ++ return pde; ++} +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0013-musb-Remove-USB_SUSPEND-auto-select-with-OTG.patch b/recipes/linux/linux-omap-2.6.31/usb/0013-musb-Remove-USB_SUSPEND-auto-select-with-OTG.patch new file mode 100644 index 0000000000..4d18b3e49c --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0013-musb-Remove-USB_SUSPEND-auto-select-with-OTG.patch @@ -0,0 +1,29 @@ +From 2fa09793f0da931d7b893291d684162d03eccef2 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Sat, 20 Jun 2009 14:09:15 +0530 +Subject: [PATCH 13/16] musb: Remove USB_SUSPEND auto select with OTG + +As USB power management is not yet supported in MUSB but we want to +use OTG build image so disable auto selection of USB_SUSPEND with +OTG till power management is supported. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/core/Kconfig | 1 - + 1 files changed, 0 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig +index ad92594..4c7d6e8 100644 +--- a/drivers/usb/core/Kconfig ++++ b/drivers/usb/core/Kconfig +@@ -109,7 +109,6 @@ config USB_SUSPEND + config USB_OTG + bool + depends on USB && EXPERIMENTAL +- select USB_SUSPEND + default n + + +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0014-musb-disable-PING-on-status-phase-of-control-transf.patch b/recipes/linux/linux-omap-2.6.31/usb/0014-musb-disable-PING-on-status-phase-of-control-transf.patch new file mode 100644 index 0000000000..f93c2a2ed6 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0014-musb-disable-PING-on-status-phase-of-control-transf.patch @@ -0,0 +1,34 @@ +From 9d49c81b7ebf7942efc14bc9533a14cb64cd68e6 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 12 Jun 2009 19:07:13 +0530 +Subject: [PATCH 14/16] musb: disable PING on status phase of control transfer + +PING token is not mandatory in status phase of control transfer +so some high speed USB sticks doesn't support this.If such devices +are connected to MUSB then they would not respond to PING token +causing delayed or failed enumeration. + +Fixing this issue by disabling PING token in status phase of control +transfers. + +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/musb/musb_host.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index cf94511..4d301d2 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -1056,6 +1056,8 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) + else + csr = MUSB_CSR0_H_STATUSPKT + | MUSB_CSR0_TXPKTRDY; ++ /* disable ping token in status phase */ ++ csr |= MUSB_CSR0_H_DIS_PING; + + /* flag status stage */ + musb->ep0_stage = MUSB_EP0_STATUS; +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0015-musb-Add-context-save-and-restore-support.patch b/recipes/linux/linux-omap-2.6.31/usb/0015-musb-Add-context-save-and-restore-support.patch new file mode 100644 index 0000000000..3bf368c79f --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0015-musb-Add-context-save-and-restore-support.patch @@ -0,0 +1,422 @@ +From 2b65475db2df6c0b7ebb8960e77e3aaf27147bda Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Thu, 3 Sep 2009 17:07:40 +0530 +Subject: [PATCH 15/16] musb: Add context save and restore support + +Adding support for MUSB register save and restore during system +suspend and resume. + +Changes: + - Added musb_save/restore_context() functions + - Added platform specific musb_platform_save/restore_context() + to handle platform specific jobs. + - Maintaining BlackFin compatibility by adding read/write + functions for registers which are not available in BlackFin + +Tested system suspend and resume on OMAP3EVM board. + +Signed-off-by: Anand Gadiyar <gadiyar@ti.com> +Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> +--- + drivers/usb/musb/musb_core.c | 157 +++++++++++++++++++++++++++++++++++++++++- + drivers/usb/musb/musb_core.h | 39 ++++++++++ + drivers/usb/musb/musb_regs.h | 90 ++++++++++++++++++++++++ + drivers/usb/musb/omap2430.c | 16 ++++ + 4 files changed, 300 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index f5ca435..0de19da 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -2165,20 +2165,169 @@ static int __devexit musb_remove(struct platform_device *pdev) + + #ifdef CONFIG_PM + ++static struct musb_context_registers musb_context; ++ ++void musb_save_context(void __iomem *musb_base) ++{ ++ int i; ++ ++ musb_platform_save_context(&musb_context); ++ ++ musb_context.faddr = musb_readb(musb_base, MUSB_FADDR); ++ musb_context.power = musb_readb(musb_base, MUSB_POWER); ++ musb_context.intrtx = musb_readw(musb_base, MUSB_INTRTX); ++ musb_context.intrrx = musb_readw(musb_base, MUSB_INTRRX); ++ musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE); ++ musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE); ++ musb_context.intrusb = musb_readb(musb_base, MUSB_INTRUSB); ++ musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE); ++ musb_context.frame = musb_readw(musb_base, MUSB_FRAME); ++ musb_context.index = musb_readb(musb_base, MUSB_INDEX); ++ musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE); ++ musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL); ++ ++ for (i = 0; i < MUSB_C_NUM_EPS; ++i) { ++ musb_writeb(musb_base, MUSB_INDEX, i); ++ musb_context.index_regs[i].txmaxp = ++ musb_readw(musb_base, 0x10 + MUSB_TXMAXP); ++ musb_context.index_regs[i].txcsr = ++ musb_readw(musb_base, 0x10 + MUSB_TXCSR); ++ musb_context.index_regs[i].rxmaxp = ++ musb_readw(musb_base, 0x10 + MUSB_RXMAXP); ++ musb_context.index_regs[i].rxcsr = ++ musb_readw(musb_base, 0x10 + MUSB_RXCSR); ++ musb_context.index_regs[i].rxcount = ++ musb_readw(musb_base, 0x10 + MUSB_RXCOUNT); ++ musb_context.index_regs[i].txtype = ++ musb_readb(musb_base, 0x10 + MUSB_TXTYPE); ++ musb_context.index_regs[i].txinterval = ++ musb_readb(musb_base, 0x10 + MUSB_TXINTERVAL); ++ musb_context.index_regs[i].rxtype = ++ musb_readb(musb_base, 0x10 + MUSB_RXTYPE); ++ musb_context.index_regs[i].rxinterval = ++ musb_readb(musb_base, 0x10 + MUSB_RXINTERVAL); ++ ++ musb_context.index_regs[i].txfifoadd = ++ musb_read_txfifoadd(musb_base); ++ musb_context.index_regs[i].rxfifoadd = ++ musb_read_rxfifoadd(musb_base); ++ musb_context.index_regs[i].txfifosz = ++ musb_read_txfifosz(musb_base); ++ musb_context.index_regs[i].rxfifosz = ++ musb_read_rxfifosz(musb_base); ++ ++ musb_context.index_regs[i].txfunaddr = ++ musb_read_txfunaddr(musb_base, i); ++ musb_context.index_regs[i].txhubaddr = ++ musb_read_txhubaddr(musb_base, i); ++ musb_context.index_regs[i].txhubport = ++ musb_read_txhubport(musb_base, i); ++ ++ musb_context.index_regs[i].rxfunaddr = ++ musb_read_rxfunaddr(musb_base, i); ++ musb_context.index_regs[i].rxhubaddr = ++ musb_read_rxhubaddr(musb_base, i); ++ musb_context.index_regs[i].rxhubport = ++ musb_read_rxhubport(musb_base, i); ++ } ++ ++ musb_writeb(musb_base, MUSB_INDEX, musb_context.index); ++} ++ ++void musb_restore_context(void __iomem *musb_base) ++{ ++ int i; ++ void __iomem *ep_target_regs; ++ ++ musb_writeb(musb_base, MUSB_FADDR, musb_context.faddr); ++ musb_writeb(musb_base, MUSB_POWER, musb_context.power); ++ musb_writew(musb_base, MUSB_INTRTX, musb_context.intrtx); ++ musb_writew(musb_base, MUSB_INTRRX, musb_context.intrrx); ++ musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe); ++ musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe); ++ musb_writeb(musb_base, MUSB_INTRUSB, musb_context.intrusb); ++ musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe); ++ musb_writew(musb_base, MUSB_FRAME, musb_context.frame); ++ musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode); ++ musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl); ++ ++ ++ for (i = 0; i < MUSB_C_NUM_EPS; ++i) { ++ musb_writeb(musb_base, MUSB_INDEX, i); ++ musb_writew(musb_base, 0x10 + MUSB_TXMAXP, ++ musb_context.index_regs[i].txmaxp); ++ musb_writew(musb_base, 0x10 + MUSB_TXCSR, ++ musb_context.index_regs[i].txcsr); ++ musb_writew(musb_base, 0x10 + MUSB_RXMAXP, ++ musb_context.index_regs[i].rxmaxp); ++ musb_writew(musb_base, 0x10 + MUSB_RXCSR, ++ musb_context.index_regs[i].rxcsr); ++ musb_writew(musb_base, 0x10 + MUSB_RXCOUNT, ++ musb_context.index_regs[i].rxcount); ++ musb_writeb(musb_base, 0x10 + MUSB_TXTYPE, ++ musb_context.index_regs[i].txtype); ++ musb_writeb(musb_base, 0x10 + MUSB_TXINTERVAL, ++ musb_context.index_regs[i].txinterval); ++ musb_writeb(musb_base, 0x10 + MUSB_RXTYPE, ++ musb_context.index_regs[i].rxtype); ++ musb_writeb(musb_base, 0x10 + MUSB_RXINTERVAL, ++ musb_context.index_regs[i].rxinterval); ++ ++ musb_write_txfifosz(musb_base, ++ musb_context.index_regs[i].txfifosz); ++ musb_write_rxfifosz(musb_base, ++ musb_context.index_regs[i].rxfifosz); ++ musb_write_txfifoadd(musb_base, ++ musb_context.index_regs[i].txfifoadd); ++ musb_write_rxfifoadd(musb_base, ++ musb_context.index_regs[i].rxfifoadd); ++ ++ musb_write_txfunaddr(musb_base, i, ++ musb_context.index_regs[i].txfunaddr); ++ musb_write_txhubaddr(musb_base, i, ++ musb_context.index_regs[i].txhubaddr); ++ musb_write_txhubport(musb_base, i, ++ musb_context.index_regs[i].txhubport); ++ ++ ep_target_regs = musb_read_target_reg_base(i, musb_base); ++ ++ musb_write_rxfunaddr(ep_target_regs, ++ musb_context.index_regs[i].rxfunaddr); ++ musb_write_rxhubaddr(ep_target_regs, ++ musb_context.index_regs[i].rxhubaddr); ++ musb_write_rxhubport(ep_target_regs, ++ musb_context.index_regs[i].rxhubport); ++ } ++ ++ musb_writeb(musb_base, MUSB_INDEX, musb_context.index); ++ ++ musb_platform_restore_context(&musb_context); ++} ++ + static int musb_suspend(struct platform_device *pdev, pm_message_t message) + { + unsigned long flags; + struct musb *musb = dev_to_musb(&pdev->dev); ++ u8 reg; + + if (!musb->clock) + return 0; + + spin_lock_irqsave(&musb->lock, flags); + ++ musb_save_context(musb->mregs); ++ + if (is_peripheral_active(musb)) { +- /* FIXME force disconnect unless we know USB will wake +- * the system up quickly enough to respond ... ++ /* System is entering into suspend where gadget would not be ++ * able to respond to host and thus it will be in an unknown ++ * state for host.Re-enumemation of gadget is required after ++ * resume to make the gadget functional thus doing a force ++ * disconnect. + */ ++ reg = musb_readb(musb->mregs, MUSB_POWER); ++ reg &= ~MUSB_POWER_SOFTCONN; ++ musb_writeb(musb->mregs, MUSB_POWER, reg); ++ + } else if (is_host_active(musb)) { + /* we know all the children are suspended; sometimes + * they will even be wakeup-enabled. +@@ -2205,6 +2354,8 @@ static int musb_resume_early(struct platform_device *pdev) + else + clk_enable(musb->clock); + ++ musb_restore_context(musb->mregs); ++ + /* for static cmos like DaVinci, register values were preserved + * unless for some reason the whole soc powered down or the USB + * module got reset through the PSC (vs just being disabled). +@@ -2215,6 +2366,8 @@ static int musb_resume_early(struct platform_device *pdev) + #else + #define musb_suspend NULL + #define musb_resume_early NULL ++#define musb_save_context do {} while (0) ++#define musb_restore_context do {} while (0) + #endif + + static struct platform_driver musb_driver = { +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index b0b4fbd..4568a8e 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -446,6 +446,45 @@ struct musb { + #endif + }; + ++#ifdef CONFIG_PM ++struct musb_csr_regs { ++ /* FIFO registers */ ++ u16 txmaxp, txcsr, rxmaxp, rxcsr, rxcount; ++ u16 rxfifoadd, txfifoadd; ++ u8 txtype, txinterval, rxtype, rxinterval; ++ u8 rxfifosz, txfifosz; ++ u8 txfunaddr, txhubaddr, txhubport; ++ u8 rxfunaddr, rxhubaddr, rxhubport; ++}; ++ ++struct musb_context_registers { ++ ++#if defined(CONFIG_ARCH_OMAP34XX) ++ u32 otg_sysconfig, otg_forcestandby; ++#endif ++ u8 faddr, power; ++ u16 intrtx, intrrx, intrtxe, intrrxe; ++ u8 intrusb, intrusbe; ++ u16 frame; ++ u8 index, testmode; ++ ++ u8 devctl, misc; ++ ++ struct musb_csr_regs index_regs[MUSB_C_NUM_EPS]; ++}; ++ ++#if defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP2430) ++extern void musb_platform_save_context(struct musb_context_registers ++ *musb_context); ++extern void musb_platform_restore_context(struct musb_context_registers ++ *musb_context); ++#else ++#define musb_platform_save_context(x) do {} while (0) ++#define musb_platform_restore_context(x) do {} while (0) ++#endif ++ ++#endif ++ + static inline void musb_set_vbus(struct musb *musb, int is_on) + { + musb->board_set_vbus(musb, is_on); +diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h +index fbfd3fd..a8e19da 100644 +--- a/drivers/usb/musb/musb_regs.h ++++ b/drivers/usb/musb/musb_regs.h +@@ -321,6 +321,26 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) + musb_writew(mbase, MUSB_RXFIFOADD, c_off); + } + ++static inline u8 musb_read_txfifosz(void __iomem *mbase) ++{ ++ return musb_readb(mbase, MUSB_TXFIFOSZ); ++} ++ ++static inline u16 musb_read_txfifoadd(void __iomem *mbase) ++{ ++ return musb_readw(mbase, MUSB_TXFIFOADD); ++} ++ ++static inline u8 musb_read_rxfifosz(void __iomem *mbase) ++{ ++ return musb_readb(mbase, MUSB_RXFIFOSZ); ++} ++ ++static inline u16 musb_read_rxfifoadd(void __iomem *mbase) ++{ ++ return musb_readw(mbase, MUSB_RXFIFOADD); ++} ++ + static inline u8 musb_read_configdata(void __iomem *mbase) + { + musb_writeb(mbase, MUSB_INDEX, 0); +@@ -376,6 +396,36 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, + qh_h_port_reg); + } + ++static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR)); ++} ++ ++static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR)); ++} ++ ++static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT)); ++} ++ ++static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR)); ++} ++ ++static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR)); ++} ++ ++static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum) ++{ ++ return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT)); ++} ++ + #else /* CONFIG_BLACKFIN */ + + #define USB_BASE USB_FADDR +@@ -464,6 +514,22 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off) + { + } + ++static inline u8 musb_read_txfifosz(void __iomem *mbase) ++{ ++} ++ ++static inline u16 musb_read_txfifoadd(void __iomem *mbase) ++{ ++} ++ ++static inline u8 musb_read_rxfifosz(void __iomem *mbase) ++{ ++} ++ ++static inline u16 musb_read_rxfifoadd(void __iomem *mbase) ++{ ++} ++ + static inline u8 musb_read_configdata(void __iomem *mbase) + { + return 0; +@@ -509,6 +575,30 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, + { + } + ++static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum) ++{ ++} ++ ++static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum) ++{ ++} ++ ++static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum) ++{ ++} ++ ++static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum) ++{ ++} ++ ++static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum) ++{ ++} ++ ++static inline void musb_read_txhubport(void __iomem *mbase, u8 epnum) ++{ ++} ++ + #endif /* CONFIG_BLACKFIN */ + + #endif /* __MUSB_REGS_H__ */ +diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c +index 3487520..84af3b3 100644 +--- a/drivers/usb/musb/omap2430.c ++++ b/drivers/usb/musb/omap2430.c +@@ -255,6 +255,22 @@ int __init musb_platform_init(struct musb *musb) + return 0; + } + ++#ifdef CONFIG_PM ++void musb_platform_save_context(struct musb_context_registers ++ *musb_context) ++{ ++ musb_context->otg_sysconfig = omap_readl(OTG_SYSCONFIG); ++ musb_context->otg_forcestandby = omap_readl(OTG_FORCESTDBY); ++} ++ ++void musb_platform_restore_context(struct musb_context_registers ++ *musb_context) ++{ ++ omap_writel(musb_context->otg_sysconfig, OTG_SYSCONFIG); ++ omap_writel(musb_context->otg_forcestandby, OTG_FORCESTDBY); ++} ++#endif ++ + int musb_platform_suspend(struct musb *musb) + { + u32 l; +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap-2.6.31/usb/0016-usb-update-defconfig.patch b/recipes/linux/linux-omap-2.6.31/usb/0016-usb-update-defconfig.patch new file mode 100644 index 0000000000..865016aca7 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.31/usb/0016-usb-update-defconfig.patch @@ -0,0 +1,618 @@ +From cbcea73d911a840a420b9e0dbf5e0715d00533b0 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta <ajay.gupta@ti.com> +Date: Fri, 11 Sep 2009 10:48:54 +0530 +Subject: [PATCH 16/16] usb: update defconfig + + - Enabled USB Audio/Video (UVC) + - Enabled RNDIS gadget builtin + - ENabled EHCI +--- + arch/arm/configs/omap3_evm_defconfig | 229 +++++++++++++++++++++++++--------- + 1 files changed, 171 insertions(+), 58 deletions(-) + +diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig +index d5ff477..8a8b4b0 100644 +--- a/arch/arm/configs/omap3_evm_defconfig ++++ b/arch/arm/configs/omap3_evm_defconfig +@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y + CONFIG_GENERIC_TIME=y + CONFIG_GENERIC_CLOCKEVENTS=y + CONFIG_MMU=y +-# CONFIG_NO_IOPORT is not set + CONFIG_GENERIC_HARDIRQS=y + CONFIG_STACKTRACE_SUPPORT=y + CONFIG_HAVE_LATENCYTOP_SUPPORT=y +@@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y + CONFIG_HARDIRQS_SW_RESEND=y + CONFIG_GENERIC_IRQ_PROBE=y + CONFIG_RWSEM_GENERIC_SPINLOCK=y +-# CONFIG_ARCH_HAS_ILOG2_U32 is not set +-# CONFIG_ARCH_HAS_ILOG2_U64 is not set + CONFIG_GENERIC_HWEIGHT=y + CONFIG_GENERIC_CALIBRATE_DELAY=y + CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y + CONFIG_VECTORS_BASE=0xffff0000 + CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++CONFIG_CONSTRUCTORS=y + + # + # General setup +@@ -77,7 +75,6 @@ CONFIG_UID16=y + CONFIG_KALLSYMS=y + # CONFIG_KALLSYMS_ALL is not set + CONFIG_KALLSYMS_EXTRA_PASS=y +-# CONFIG_STRIP_ASM_SYMS is not set + CONFIG_HOTPLUG=y + CONFIG_PRINTK=y + CONFIG_BUG=y +@@ -90,7 +87,12 @@ CONFIG_TIMERFD=y + CONFIG_EVENTFD=y + CONFIG_SHMEM=y + CONFIG_AIO=y ++ ++# ++# Performance Counters ++# + CONFIG_VM_EVENT_COUNTERS=y ++# CONFIG_STRIP_ASM_SYMS is not set + CONFIG_COMPAT_BRK=y + CONFIG_SLAB=y + # CONFIG_SLUB is not set +@@ -102,6 +104,10 @@ CONFIG_HAVE_OPROFILE=y + CONFIG_HAVE_KPROBES=y + CONFIG_HAVE_KRETPROBES=y + CONFIG_HAVE_CLK=y ++ ++# ++# GCOV-based kernel profiling ++# + # CONFIG_SLOW_WORK is not set + CONFIG_HAVE_GENERIC_DMA_COHERENT=y + CONFIG_SLABINFO=y +@@ -114,7 +120,7 @@ CONFIG_MODULE_UNLOAD=y + CONFIG_MODVERSIONS=y + CONFIG_MODULE_SRCVERSION_ALL=y + CONFIG_BLOCK=y +-# CONFIG_LBD is not set ++CONFIG_LBDAF=y + # CONFIG_BLK_DEV_BSG is not set + # CONFIG_BLK_DEV_INTEGRITY is not set + +@@ -141,13 +147,14 @@ CONFIG_FREEZER=y + # CONFIG_ARCH_VERSATILE is not set + # CONFIG_ARCH_AT91 is not set + # CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_GEMINI is not set + # CONFIG_ARCH_EBSA110 is not set + # CONFIG_ARCH_EP93XX is not set +-# CONFIG_ARCH_GEMINI is not set + # CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_STMP3XXX is not set + # CONFIG_ARCH_NETX is not set + # CONFIG_ARCH_H720X is not set +-# CONFIG_ARCH_IMX is not set + # CONFIG_ARCH_IOP13XX is not set + # CONFIG_ARCH_IOP32X is not set + # CONFIG_ARCH_IOP33X is not set +@@ -156,25 +163,25 @@ CONFIG_FREEZER=y + # CONFIG_ARCH_IXP4XX is not set + # CONFIG_ARCH_L7200 is not set + # CONFIG_ARCH_KIRKWOOD is not set +-# CONFIG_ARCH_KS8695 is not set +-# CONFIG_ARCH_NS9XXX is not set + # CONFIG_ARCH_LOKI is not set + # CONFIG_ARCH_MV78XX0 is not set +-# CONFIG_ARCH_MXC is not set + # CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_MMP is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_W90X900 is not set + # CONFIG_ARCH_PNX4008 is not set + # CONFIG_ARCH_PXA is not set +-# CONFIG_ARCH_MMP is not set ++# CONFIG_ARCH_MSM is not set + # CONFIG_ARCH_RPC is not set + # CONFIG_ARCH_SA1100 is not set + # CONFIG_ARCH_S3C2410 is not set + # CONFIG_ARCH_S3C64XX is not set + # CONFIG_ARCH_SHARK is not set + # CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_U300 is not set + # CONFIG_ARCH_DAVINCI is not set + CONFIG_ARCH_OMAP=y +-# CONFIG_ARCH_MSM is not set +-# CONFIG_ARCH_W90X900 is not set + + # + # TI OMAP Implementations +@@ -183,6 +190,7 @@ CONFIG_ARCH_OMAP_OTG=y + # CONFIG_ARCH_OMAP1 is not set + # CONFIG_ARCH_OMAP2 is not set + CONFIG_ARCH_OMAP3=y ++# CONFIG_ARCH_OMAP4 is not set + + # + # OMAP Feature Selections +@@ -202,7 +210,8 @@ CONFIG_OMAP_DM_TIMER=y + CONFIG_OMAP_LL_DEBUG_UART1=y + # CONFIG_OMAP_LL_DEBUG_UART2 is not set + # CONFIG_OMAP_LL_DEBUG_UART3 is not set +-CONFIG_OMAP_SERIAL_WAKE=y ++# CONFIG_OMAP_PM_NONE is not set ++CONFIG_OMAP_PM_NOOP=y + CONFIG_ARCH_OMAP34XX=y + CONFIG_ARCH_OMAP3430=y + +@@ -216,6 +225,7 @@ CONFIG_MACH_OMAP3EVM=y + # CONFIG_MACH_OMAP3_PANDORA is not set + # CONFIG_MACH_OMAP_3430SDP is not set + # CONFIG_MACH_NOKIA_RX51 is not set ++# CONFIG_MACH_OMAP_ZOOM2 is not set + + # + # Processor Type +@@ -243,7 +253,6 @@ CONFIG_ARM_THUMB=y + # CONFIG_CPU_DCACHE_DISABLE is not set + # CONFIG_CPU_BPREDICT_DISABLE is not set + CONFIG_HAS_TLS_REG=y +-# CONFIG_OUTER_CACHE is not set + # CONFIG_ARM_ERRATA_430973 is not set + # CONFIG_ARM_ERRATA_458693 is not set + # CONFIG_ARM_ERRATA_460075 is not set +@@ -271,7 +280,6 @@ CONFIG_PAGE_OFFSET=0xC0000000 + CONFIG_HZ=128 + CONFIG_AEABI=y + CONFIG_OABI_COMPAT=y +-CONFIG_ARCH_FLATMEM_HAS_HOLES=y + # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set + # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set + # CONFIG_HIGHMEM is not set +@@ -286,11 +294,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 + # CONFIG_PHYS_ADDR_T_64BIT is not set + CONFIG_ZONE_DMA_FLAG=0 + CONFIG_VIRT_TO_BUS=y +-CONFIG_UNEVICTABLE_LRU=y + CONFIG_HAVE_MLOCK=y + CONFIG_HAVE_MLOCKED_PAGE_BIT=y ++CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 + # CONFIG_LEDS is not set + CONFIG_ALIGNMENT_TRAP=y ++# CONFIG_UACCESS_WITH_MEMCPY is not set + + # + # Boot options +@@ -401,6 +410,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" + # CONFIG_ECONET is not set + # CONFIG_WAN_ROUTER is not set + # CONFIG_PHONET is not set ++# CONFIG_IEEE802154 is not set + # CONFIG_NET_SCHED is not set + # CONFIG_DCB is not set + +@@ -418,7 +428,11 @@ CONFIG_WIRELESS=y + # CONFIG_WIRELESS_OLD_REGULATORY is not set + # CONFIG_WIRELESS_EXT is not set + # CONFIG_LIB80211 is not set +-# CONFIG_MAC80211 is not set ++ ++# ++# CFG80211 needs to be enabled for MAC80211 ++# ++CONFIG_MAC80211_DEFAULT_PS_VALUE=0 + # CONFIG_WIMAX is not set + # CONFIG_RFKILL is not set + # CONFIG_NET_9P is not set +@@ -516,6 +530,7 @@ CONFIG_MTD_NAND=y + # CONFIG_MTD_NAND_ECC_SMC is not set + # CONFIG_MTD_NAND_MUSEUM_IDS is not set + # CONFIG_MTD_NAND_GPIO is not set ++# CONFIG_MTD_NAND_OMAP2 is not set + CONFIG_MTD_NAND_IDS=y + # CONFIG_MTD_NAND_DISKONCHIP is not set + # CONFIG_MTD_NAND_NANDSIM is not set +@@ -551,6 +566,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 + # CONFIG_BLK_DEV_XIP is not set + # CONFIG_CDROM_PKTCDVD is not set + # CONFIG_ATA_OVER_ETH is not set ++# CONFIG_MG_DISK is not set + # CONFIG_MISC_DEVICES is not set + CONFIG_HAVE_IDE=y + # CONFIG_IDE is not set +@@ -574,10 +590,6 @@ CONFIG_BLK_DEV_SD=y + # CONFIG_BLK_DEV_SR is not set + # CONFIG_CHR_DEV_SG is not set + # CONFIG_CHR_DEV_SCH is not set +- +-# +-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +-# + # CONFIG_SCSI_MULTI_LUN is not set + # CONFIG_SCSI_CONSTANTS is not set + # CONFIG_SCSI_LOGGING is not set +@@ -602,7 +614,6 @@ CONFIG_SCSI_LOWLEVEL=y + # CONFIG_ATA is not set + # CONFIG_MD is not set + CONFIG_NETDEVICES=y +-CONFIG_COMPAT_NET_DEV_OPS=y + # CONFIG_DUMMY is not set + # CONFIG_BONDING is not set + # CONFIG_MACVLAN is not set +@@ -628,6 +639,8 @@ CONFIG_SMC911X=y + # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set + # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set + # CONFIG_B44 is not set ++# CONFIG_KS8842 is not set ++# CONFIG_KS8851 is not set + # CONFIG_NETDEV_1000 is not set + # CONFIG_NETDEV_10000 is not set + +@@ -677,12 +690,13 @@ CONFIG_INPUT_EVDEV=y + # + CONFIG_INPUT_KEYBOARD=y + # CONFIG_KEYBOARD_ATKBD is not set +-# CONFIG_KEYBOARD_SUNKBD is not set + # CONFIG_KEYBOARD_LKKBD is not set +-# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYBOARD_MATRIX is not set + # CONFIG_KEYBOARD_NEWTON is not set + # CONFIG_KEYBOARD_STOWAWAY is not set +-# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set + # CONFIG_INPUT_MOUSE is not set + # CONFIG_INPUT_JOYSTICK is not set + # CONFIG_INPUT_TABLET is not set +@@ -692,6 +706,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y + # CONFIG_TOUCHSCREEN_AD7879_I2C is not set + # CONFIG_TOUCHSCREEN_AD7879_SPI is not set + # CONFIG_TOUCHSCREEN_AD7879 is not set ++# CONFIG_TOUCHSCREEN_EETI is not set + # CONFIG_TOUCHSCREEN_FUJITSU is not set + # CONFIG_TOUCHSCREEN_GUNZE is not set + # CONFIG_TOUCHSCREEN_ELO is not set +@@ -705,6 +720,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y + # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set + # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set + # CONFIG_TOUCHSCREEN_TSC2007 is not set ++# CONFIG_TOUCHSCREEN_W90X900 is not set + # CONFIG_INPUT_MISC is not set + + # +@@ -764,6 +780,7 @@ CONFIG_I2C_HELPER_AUTO=y + # + # I2C system bus drivers (mostly embedded / system-on-chip) + # ++# CONFIG_I2C_DESIGNWARE is not set + # CONFIG_I2C_GPIO is not set + # CONFIG_I2C_OCORES is not set + CONFIG_I2C_OMAP=y +@@ -789,7 +806,6 @@ CONFIG_I2C_OMAP=y + # CONFIG_SENSORS_PCF8574 is not set + # CONFIG_PCF8575 is not set + # CONFIG_SENSORS_PCA9539 is not set +-# CONFIG_SENSORS_MAX6875 is not set + # CONFIG_SENSORS_TSL2550 is not set + # CONFIG_I2C_DEBUG_CORE is not set + # CONFIG_I2C_DEBUG_ALGO is not set +@@ -850,6 +866,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y + # + # CONFIG_SOFT_WATCHDOG is not set + CONFIG_OMAP_WATCHDOG=y ++# CONFIG_TWL4030_WATCHDOG is not set + + # + # USB-based Watchdog Cards +@@ -880,23 +897,74 @@ CONFIG_TWL4030_CORE=y + # CONFIG_MFD_WM8400 is not set + # CONFIG_MFD_WM8350_I2C is not set + # CONFIG_MFD_PCF50633 is not set +- +-# +-# Multimedia devices +-# ++# CONFIG_AB3100_CORE is not set ++# CONFIG_EZX_PCAP is not set ++CONFIG_MEDIA_SUPPORT=y + + # + # Multimedia core support + # +-# CONFIG_VIDEO_DEV is not set ++CONFIG_VIDEO_DEV=y ++CONFIG_VIDEO_V4L2_COMMON=y ++CONFIG_VIDEO_ALLOW_V4L1=y ++CONFIG_VIDEO_V4L1_COMPAT=y + # CONFIG_DVB_CORE is not set +-# CONFIG_VIDEO_MEDIA is not set ++CONFIG_VIDEO_MEDIA=y + + # + # Multimedia drivers + # +-CONFIG_DAB=y +-# CONFIG_USB_DABUSB is not set ++# CONFIG_MEDIA_ATTACH is not set ++CONFIG_MEDIA_TUNER=y ++# CONFIG_MEDIA_TUNER_CUSTOMISE is not set ++CONFIG_MEDIA_TUNER_SIMPLE=y ++CONFIG_MEDIA_TUNER_TDA8290=y ++CONFIG_MEDIA_TUNER_TDA9887=y ++CONFIG_MEDIA_TUNER_TEA5761=y ++CONFIG_MEDIA_TUNER_TEA5767=y ++CONFIG_MEDIA_TUNER_MT20XX=y ++CONFIG_MEDIA_TUNER_XC2028=y ++CONFIG_MEDIA_TUNER_XC5000=y ++CONFIG_MEDIA_TUNER_MC44S803=y ++CONFIG_VIDEO_V4L2=y ++CONFIG_VIDEO_V4L1=y ++CONFIG_VIDEO_CAPTURE_DRIVERS=y ++# CONFIG_VIDEO_ADV_DEBUG is not set ++# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set ++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y ++# CONFIG_VIDEO_VIVI is not set ++# CONFIG_VIDEO_CPIA is not set ++# CONFIG_VIDEO_CPIA2 is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_SOC_CAMERA is not set ++CONFIG_V4L_USB_DRIVERS=y ++CONFIG_USB_VIDEO_CLASS=y ++CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y ++# CONFIG_USB_GSPCA is not set ++# CONFIG_VIDEO_PVRUSB2 is not set ++# CONFIG_VIDEO_HDPVR is not set ++# CONFIG_VIDEO_EM28XX is not set ++# CONFIG_VIDEO_CX231XX is not set ++# CONFIG_VIDEO_USBVISION is not set ++# CONFIG_USB_VICAM is not set ++# CONFIG_USB_IBMCAM is not set ++# CONFIG_USB_KONICAWC is not set ++# CONFIG_USB_QUICKCAM_MESSENGER is not set ++# CONFIG_USB_ET61X251 is not set ++# CONFIG_VIDEO_OVCAMCHIP is not set ++# CONFIG_USB_OV511 is not set ++# CONFIG_USB_SE401 is not set ++# CONFIG_USB_SN9C102 is not set ++# CONFIG_USB_STV680 is not set ++# CONFIG_USB_ZC0301 is not set ++# CONFIG_USB_PWC is not set ++# CONFIG_USB_PWC_INPUT_EVDEV is not set ++# CONFIG_USB_ZR364XX is not set ++# CONFIG_USB_STKWEBCAM is not set ++# CONFIG_USB_S2255 is not set ++# CONFIG_RADIO_ADAPTERS is not set ++# CONFIG_DAB is not set + + # + # Graphics support +@@ -916,7 +984,35 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m + # + # CONFIG_VGA_CONSOLE is not set + CONFIG_DUMMY_CONSOLE=y +-# CONFIG_SOUND is not set ++CONFIG_SOUND=y ++# CONFIG_SOUND_OSS_CORE is not set ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++CONFIG_SND_HWDEP=y ++CONFIG_SND_RAWMIDI=y ++# CONFIG_SND_SEQUENCER is not set ++# CONFIG_SND_MIXER_OSS is not set ++# CONFIG_SND_PCM_OSS is not set ++# CONFIG_SND_HRTIMER is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++# CONFIG_SND_SUPPORT_OLD_API is not set ++# CONFIG_SND_VERBOSE_PROCFS is not set ++# CONFIG_SND_VERBOSE_PRINTK is not set ++# CONFIG_SND_DEBUG is not set ++# CONFIG_SND_RAWMIDI_SEQ is not set ++# CONFIG_SND_OPL3_LIB_SEQ is not set ++# CONFIG_SND_OPL4_LIB_SEQ is not set ++# CONFIG_SND_SBAWE_SEQ is not set ++# CONFIG_SND_EMU10K1_SEQ is not set ++# CONFIG_SND_DRIVERS is not set ++# CONFIG_SND_ARM is not set ++# CONFIG_SND_SPI is not set ++CONFIG_SND_USB=y ++CONFIG_SND_USB_AUDIO=y ++# CONFIG_SND_USB_CAIAQ is not set ++# CONFIG_SND_SOC is not set ++# CONFIG_SOUND_PRIME is not set + CONFIG_HID_SUPPORT=y + CONFIG_HID=y + # CONFIG_HID_DEBUG is not set +@@ -938,7 +1034,7 @@ CONFIG_USB_HID=y + # CONFIG_HID_CHERRY is not set + # CONFIG_HID_CHICONY is not set + # CONFIG_HID_CYPRESS is not set +-# CONFIG_DRAGONRISE_FF is not set ++# CONFIG_HID_DRAGONRISE is not set + # CONFIG_HID_EZKEY is not set + # CONFIG_HID_KYE is not set + # CONFIG_HID_GYRATION is not set +@@ -952,14 +1048,15 @@ CONFIG_USB_HID=y + # CONFIG_HID_SAMSUNG is not set + # CONFIG_HID_SONY is not set + # CONFIG_HID_SUNPLUS is not set +-# CONFIG_GREENASIA_FF is not set ++# CONFIG_HID_GREENASIA is not set ++# CONFIG_HID_SMARTJOYPLUS is not set + # CONFIG_HID_TOPSEED is not set +-# CONFIG_THRUSTMASTER_FF is not set +-# CONFIG_ZEROPLUS_FF is not set ++# CONFIG_HID_THRUSTMASTER is not set ++# CONFIG_HID_ZEROPLUS is not set + CONFIG_USB_SUPPORT=y + CONFIG_USB_ARCH_HAS_HCD=y + CONFIG_USB_ARCH_HAS_OHCI=y +-# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB_ARCH_HAS_EHCI=y + CONFIG_USB=y + # CONFIG_USB_DEBUG is not set + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +@@ -974,7 +1071,7 @@ CONFIG_USB_SUSPEND=y + CONFIG_USB_OTG=y + # CONFIG_USB_OTG_WHITELIST is not set + # CONFIG_USB_OTG_BLACKLIST_HUB is not set +-CONFIG_USB_MON=y ++# CONFIG_USB_MON is not set + # CONFIG_USB_WUSB is not set + # CONFIG_USB_WUSB_CBAF is not set + +@@ -982,6 +1079,9 @@ CONFIG_USB_MON=y + # USB Host Controller Drivers + # + # CONFIG_USB_C67X00_HCD is not set ++CONFIG_USB_EHCI_HCD=y ++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set + # CONFIG_USB_OXU210HP_HCD is not set + # CONFIG_USB_ISP116X_HCD is not set + # CONFIG_USB_ISP1760_HCD is not set +@@ -1003,7 +1103,7 @@ CONFIG_USB_MUSB_HDRC_HCD=y + # CONFIG_MUSB_PIO_ONLY is not set + CONFIG_USB_INVENTRA_DMA=y + # CONFIG_USB_TI_CPPI_DMA is not set +-# CONFIG_USB_MUSB_DEBUG is not set ++CONFIG_USB_MUSB_DEBUG=y + + # + # USB Device Class drivers +@@ -1063,10 +1163,11 @@ CONFIG_USB_STORAGE=y + # CONFIG_USB_IDMOUSE is not set + # CONFIG_USB_FTDI_ELAN is not set + # CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set + # CONFIG_USB_LD is not set + # CONFIG_USB_TRANCEVIBRATOR is not set + # CONFIG_USB_IOWARRIOR is not set +-CONFIG_USB_TEST=y ++# CONFIG_USB_TEST is not set + # CONFIG_USB_ISIGHTFW is not set + # CONFIG_USB_VST is not set + CONFIG_USB_GADGET=y +@@ -1081,19 +1182,22 @@ CONFIG_USB_GADGET_SELECTED=y + # CONFIG_USB_GADGET_OMAP is not set + # CONFIG_USB_GADGET_PXA25X is not set + # CONFIG_USB_GADGET_PXA27X is not set +-# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_S3C_HSOTG is not set + # CONFIG_USB_GADGET_IMX is not set ++# CONFIG_USB_GADGET_S3C2410 is not set + # CONFIG_USB_GADGET_M66592 is not set + # CONFIG_USB_GADGET_AMD5536UDC is not set + # CONFIG_USB_GADGET_FSL_QE is not set + # CONFIG_USB_GADGET_CI13XXX is not set + # CONFIG_USB_GADGET_NET2280 is not set + # CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LANGWELL is not set + # CONFIG_USB_GADGET_DUMMY_HCD is not set + CONFIG_USB_GADGET_DUALSPEED=y +-CONFIG_USB_ZERO=m +-# CONFIG_USB_ZERO_HNPTEST is not set +-# CONFIG_USB_ETH is not set ++# CONFIG_USB_ZERO is not set ++# CONFIG_USB_AUDIO is not set ++CONFIG_USB_ETH=y ++CONFIG_USB_ETH_RNDIS=y + # CONFIG_USB_GADGETFS is not set + # CONFIG_USB_FILE_STORAGE is not set + # CONFIG_USB_G_SERIAL is not set +@@ -1108,7 +1212,7 @@ CONFIG_USB_OTG_UTILS=y + # CONFIG_USB_GPIO_VBUS is not set + # CONFIG_ISP1301_OMAP is not set + # CONFIG_TWL4030_USB is not set +-# CONFIG_NOP_USB_XCEIV is not set ++CONFIG_NOP_USB_XCEIV=y + CONFIG_MMC=y + # CONFIG_MMC_DEBUG is not set + # CONFIG_MMC_UNSAFE_RESUME is not set +@@ -1125,7 +1229,6 @@ CONFIG_MMC_BLOCK_BOUNCE=y + # MMC/SD/SDIO Host Controller Drivers + # + # CONFIG_MMC_SDHCI is not set +-# CONFIG_MMC_OMAP is not set + CONFIG_MMC_OMAP_HS=m + # CONFIG_MMC_SPI is not set + # CONFIG_MEMSTICK is not set +@@ -1139,12 +1242,20 @@ CONFIG_REGULATOR=y + # CONFIG_REGULATOR_DEBUG is not set + # CONFIG_REGULATOR_FIXED_VOLTAGE is not set + # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set ++# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set + # CONFIG_REGULATOR_BQ24022 is not set ++# CONFIG_REGULATOR_MAX1586 is not set + CONFIG_REGULATOR_TWL4030=y ++# CONFIG_REGULATOR_LP3971 is not set + # CONFIG_UIO is not set + # CONFIG_STAGING is not set + + # ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# + # File systems + # + CONFIG_EXT2_FS=y +@@ -1158,10 +1269,12 @@ CONFIG_JBD=y + # CONFIG_REISERFS_FS is not set + # CONFIG_JFS_FS is not set + # CONFIG_FS_POSIX_ACL is not set +-CONFIG_FILE_LOCKING=y + # CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set + # CONFIG_OCFS2_FS is not set + # CONFIG_BTRFS_FS is not set ++CONFIG_FILE_LOCKING=y ++CONFIG_FSNOTIFY=y + CONFIG_DNOTIFY=y + CONFIG_INOTIFY=y + CONFIG_INOTIFY_USER=y +@@ -1247,6 +1360,7 @@ CONFIG_NFS_FS=y + CONFIG_NFS_V3=y + # CONFIG_NFS_V3_ACL is not set + CONFIG_NFS_V4=y ++# CONFIG_NFS_V4_1 is not set + CONFIG_ROOT_NFS=y + # CONFIG_NFSD is not set + CONFIG_LOCKD=y +@@ -1349,6 +1463,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 + # CONFIG_TIMER_STATS is not set + # CONFIG_DEBUG_OBJECTS is not set + # CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_KMEMLEAK is not set + # CONFIG_DEBUG_RT_MUTEXES is not set + # CONFIG_RT_MUTEX_TESTER is not set + # CONFIG_DEBUG_SPINLOCK is not set +@@ -1377,17 +1492,15 @@ CONFIG_DEBUG_INFO=y + # CONFIG_PAGE_POISONING is not set + CONFIG_HAVE_FUNCTION_TRACER=y + CONFIG_TRACING_SUPPORT=y +- +-# +-# Tracers +-# ++CONFIG_FTRACE=y + # CONFIG_FUNCTION_TRACER is not set + # CONFIG_IRQSOFF_TRACER is not set + # CONFIG_SCHED_TRACER is not set +-# CONFIG_CONTEXT_SWITCH_TRACER is not set +-# CONFIG_EVENT_TRACER is not set ++# CONFIG_ENABLE_DEFAULT_TRACERS is not set + # CONFIG_BOOT_TRACER is not set +-# CONFIG_TRACE_BRANCH_PROFILING is not set ++CONFIG_BRANCH_PROFILE_NONE=y ++# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set ++# CONFIG_PROFILE_ALL_BRANCHES is not set + # CONFIG_STACK_TRACER is not set + # CONFIG_KMEMTRACE is not set + # CONFIG_WORKQUEUE_TRACER is not set +-- +1.6.2.4 + diff --git a/recipes/linux/linux-omap_2.6.31.bb b/recipes/linux/linux-omap_2.6.31.bb index b2387fc6e7..70bd906f55 100644 --- a/recipes/linux/linux-omap_2.6.31.bb +++ b/recipes/linux/linux-omap_2.6.31.bb @@ -18,7 +18,6 @@ SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.g file://defconfig" SRC_URI_append = " \ - file://ehci-phy-reset.patch;patch=1 \ file://ehci.patch;patch=1 \ file://0001-implement-TIF_RESTORE_SIGMASK-support-and-enable-the.patch;patch=1 \ file://cache/l1cache-shift.patch;patch=1 \ @@ -48,6 +47,22 @@ SRC_URI_append = " \ file://madc/madc-driver.patch;patch=1 \ file://madc/madc.patch;patch=1 \ file://arch-has-holes.diff;patch=1 \ + file://usb/0001-musb-fix-put_device-call-sequence.patch;patch=1 \ + file://usb/0002-ehci-fix-ehci-pin-mux-init.patch;patch=1 \ + file://usb/0003-ehci-adding-mux-pin-for-EHCI-phy-reset-line.patch;patch=1 \ + file://usb/0004-ehci-correct-EHCI-init-parameters-on-OMAP3EVM.patch;patch=1 \ + file://usb/0005-ehci-fix-phy_reset-init-in-ehci-probe.patch;patch=1 \ + file://usb/0006-ehci-increase-timeout-to-fix-ehci-failure.patch;patch=1 \ + file://usb/0007-ehci-portwise-configurations.patch;patch=1 \ + file://usb/0008-omap3-Add-CHIP_GE_OMAP3430ES3-for-HSUSB.patch;patch=1 \ + file://usb/0009-ehci-Support-for-ES3.x.patch;patch=1 \ + file://usb/0010-ehci-update-driver-with-generic-change.patch;patch=1 \ + file://usb/0011-musb-fix-musb-gadget_driver-NULL-bug.patch;patch=1 \ + file://usb/0012-musb-Add-back-old-musb-procfs-file.patch;patch=1 \ + file://usb/0013-musb-Remove-USB_SUSPEND-auto-select-with-OTG.patch;patch=1 \ + file://usb/0014-musb-disable-PING-on-status-phase-of-control-transf.patch;patch=1 \ + file://usb/0015-musb-Add-context-save-and-restore-support.patch;patch=1 \ + file://usb/0016-usb-update-defconfig.patch;patch=1 \ " SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \ |