summaryrefslogtreecommitdiff
path: root/recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch')
-rw-r--r--recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch1076
1 files changed, 1076 insertions, 0 deletions
diff --git a/recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch b/recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch
new file mode 100644
index 0000000000..e2f21699b9
--- /dev/null
+++ b/recipes/linux/linux-omap-pm-2.6.28/0008-DSS-Hacked-N810-support.patch
@@ -0,0 +1,1076 @@
+From a36dfe9ce6faa6a13bb82b3039856d8aa1528dc2 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 18 Dec 2008 15:37:42 +0200
+Subject: [PATCH] DSS: Hacked N810 support
+
+---
+ arch/arm/mach-omap2/board-n800.c | 214 ++++++++++++++---
+ drivers/video/omap2/Kconfig | 10 +
+ drivers/video/omap2/Makefile | 3 +
+ drivers/video/omap2/ctrl-blizzard.c | 279 ++++++++++++++++++++++
+ drivers/video/omap2/panel-n800.c | 437 +++++++++++++++++++++++++++++++++++
+ 5 files changed, 905 insertions(+), 38 deletions(-)
+ create mode 100644 drivers/video/omap2/ctrl-blizzard.c
+ create mode 100644 drivers/video/omap2/panel-n800.c
+
+diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
+index b38b295..ffa5aad 100644
+--- a/arch/arm/mach-omap2/board-n800.c
++++ b/arch/arm/mach-omap2/board-n800.c
+@@ -40,6 +40,7 @@
+ #include <mach/gpio-switch.h>
+ #include <mach/omapfb.h>
+ #include <mach/blizzard.h>
++#include <mach/display.h>
+
+ #include <../drivers/cbus/tahvo.h>
+ #include <../drivers/media/video/tcm825x.h>
+@@ -156,23 +157,175 @@ static struct omap_uart_config n800_uart_config __initdata = {
+
+ #include "../../../drivers/cbus/retu.h"
+
+-static struct omap_fbmem_config n800_fbmem0_config __initdata = {
+- .size = 752 * 1024,
++static struct omap_tmp105_config n800_tmp105_config __initdata = {
++ .tmp105_irq_pin = 125,
++ .set_power = n800_tmp105_set_power,
+ };
+
+-static struct omap_fbmem_config n800_fbmem1_config __initdata = {
+- .size = 752 * 1024,
+-};
+
+-static struct omap_fbmem_config n800_fbmem2_config __initdata = {
+- .size = 752 * 1024,
++
++
++/* DISPLAY */
++static struct {
++ struct clk *sys_ck;
++} blizzard;
++
++static int blizzard_get_clocks(void)
++{
++ blizzard.sys_ck = clk_get(0, "osc_ck");
++ if (IS_ERR(blizzard.sys_ck)) {
++ printk(KERN_ERR "can't get Blizzard clock\n");
++ return PTR_ERR(blizzard.sys_ck);
++ }
++ return 0;
++}
++
++static unsigned long blizzard_get_clock_rate(void)
++{
++ return clk_get_rate(blizzard.sys_ck);
++}
++
++static int n800_pn800_enable(struct omap_display *display)
++{
++ if (display->hw_config.panel_reset_gpio != -1) {
++ printk("enabling panel gpio\n");
++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1);
++ }
++
++ return 0;
++}
++
++static void n800_pn800_disable(struct omap_display *display)
++{
++ if (display->hw_config.panel_reset_gpio != -1) {
++ printk("disabling panel gpio\n");
++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0);
++ msleep(120);
++ }
++}
++
++static int n800_blizzard_enable(struct omap_display *display)
++{
++ printk("enabling bliz powers\n");
++
++ /* Vcore to 1.475V */
++ tahvo_set_clear_reg_bits(0x07, 0, 0xf);
++ msleep(10);
++
++ clk_enable(blizzard.sys_ck);
++
++ if (display->hw_config.ctrl_reset_gpio != -1)
++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 1);
++
++ printk("osc_ck %lu\n", blizzard_get_clock_rate());
++
++ return 0;
++}
++
++static void n800_blizzard_disable(struct omap_display *display)
++{
++ printk("disabling bliz powers\n");
++
++ if (display->hw_config.ctrl_reset_gpio != -1)
++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 0);
++
++ clk_disable(blizzard.sys_ck);
++
++ /* Vcore to 1.005V */
++ tahvo_set_clear_reg_bits(0x07, 0xf, 0);
++}
++
++static int n800_set_backlight_level(struct omap_display *display, int level)
++{
++ return 0;
++}
++
++static struct omap_display_data n800_dsi_display_data = {
++ .type = OMAP_DISPLAY_TYPE_DBI,
++ .name = "lcd",
++ .ctrl_name = "ctrl-blizzard",
++ .panel_name = "panel-pn800",
++ .panel_reset_gpio = -1,
++ .ctrl_reset_gpio = N800_BLIZZARD_POWERDOWN_GPIO,
++ .panel_enable = n800_pn800_enable,
++ .panel_disable = n800_pn800_disable,
++ .ctrl_enable = n800_blizzard_enable,
++ .ctrl_disable = n800_blizzard_disable,
++ .set_backlight = n800_set_backlight_level,
++ .u.rfbi = {
++ .channel = 0,
++ /* 8 for cmd mode, 16 for pixel data. ctrl-blizzard handles switching */
++ .data_lines = 8,
++ },
++ .priv = 0, // XXX used for panel datalines
++};
++static struct omap_dss_platform_data n800_dss_data = {
++ .num_displays = 1,
++ .displays = {
++ &n800_dsi_display_data,
++ },
+ };
+
+-static struct omap_tmp105_config n800_tmp105_config __initdata = {
+- .tmp105_irq_pin = 125,
+- .set_power = n800_tmp105_set_power,
++static struct platform_device n800_dss_device = {
++ .name = "omap-dss",
++ .id = -1,
++ .dev = {
++ .platform_data = &n800_dss_data,
++ },
+ };
+
++static void __init n800_display_init(void)
++{
++ int r;
++ const struct omap_lcd_config *conf;
++
++ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
++ if (conf != NULL) {
++ n800_dsi_display_data.panel_reset_gpio = conf->nreset_gpio;
++ n800_dsi_display_data.priv = (void*)(u32)conf->data_lines; // XXX
++ //printk("\n\nTULI %d\n\n", conf->data_lines);
++ } else {
++ printk("\n\nEI TULLU MIOTÄÄÄ\n\n");
++ }
++
++ blizzard_get_clocks();
++ clk_enable(blizzard.sys_ck); // XXX always enable
++
++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data);
++ //
++ if (n800_dsi_display_data.ctrl_reset_gpio != -1) {
++ r = gpio_request(n800_dsi_display_data.ctrl_reset_gpio,
++ "Blizzard pd");
++ if (r < 0) {
++ n800_dsi_display_data.ctrl_reset_gpio = -1;
++ printk(KERN_ERR "Unable to get Blizzard GPIO\n");
++ } else {
++ gpio_direction_output(n800_dsi_display_data.ctrl_reset_gpio,
++ 1);
++ // XXX always enable
++ }
++ }
++
++ if (n800_dsi_display_data.panel_reset_gpio != -1) {
++ r = gpio_request(n800_dsi_display_data.panel_reset_gpio,
++ "panel reset");
++ if (r < 0) {
++ n800_dsi_display_data.panel_reset_gpio = -1;
++ printk(KERN_ERR "Unable to get pn800 GPIO\n");
++ } else {
++ gpio_direction_output(n800_dsi_display_data.panel_reset_gpio,
++ 1);
++ // XXX always enable
++ }
++ }
++}
++
++/* DISPLAY END */
++
++
++
++
++
+ static void mipid_shutdown(struct mipid_platform_data *pdata)
+ {
+ if (pdata->nreset_gpio != -1) {
+@@ -186,6 +339,7 @@ static struct mipid_platform_data n800_mipid_platform_data = {
+ .shutdown = mipid_shutdown,
+ };
+
++#if 0
+ static void __init mipid_dev_init(void)
+ {
+ const struct omap_lcd_config *conf;
+@@ -196,26 +350,9 @@ static void __init mipid_dev_init(void)
+ n800_mipid_platform_data.data_lines = conf->data_lines;
+ }
+ }
++#endif
+
+-static struct {
+- struct clk *sys_ck;
+-} blizzard;
+-
+-static int blizzard_get_clocks(void)
+-{
+- blizzard.sys_ck = clk_get(0, "osc_ck");
+- if (IS_ERR(blizzard.sys_ck)) {
+- printk(KERN_ERR "can't get Blizzard clock\n");
+- return PTR_ERR(blizzard.sys_ck);
+- }
+- return 0;
+-}
+-
+-static unsigned long blizzard_get_clock_rate(struct device *dev)
+-{
+- return clk_get_rate(blizzard.sys_ck);
+-}
+-
++#if 0
+ static void blizzard_enable_clocks(int enable)
+ {
+ if (enable)
+@@ -260,14 +397,12 @@ static void __init blizzard_dev_init(void)
+ gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1);
+
+ blizzard_get_clocks();
+- omapfb_set_ctrl_platform_data(&n800_blizzard_data);
++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data);
+ }
++#endif
+
+ static struct omap_board_config_kernel n800_config[] __initdata = {
+ { OMAP_TAG_UART, &n800_uart_config },
+- { OMAP_TAG_FBMEM, &n800_fbmem0_config },
+- { OMAP_TAG_FBMEM, &n800_fbmem1_config },
+- { OMAP_TAG_FBMEM, &n800_fbmem2_config },
+ { OMAP_TAG_TMP105, &n800_tmp105_config },
+ };
+
+@@ -374,7 +509,7 @@ static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+
+ static struct spi_board_info n800_spi_board_info[] __initdata = {
+ {
+- .modalias = "lcd_mipid",
++ .modalias = "panel-n800",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+@@ -399,7 +534,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
+
+ static struct spi_board_info n810_spi_board_info[] __initdata = {
+ {
+- .modalias = "lcd_mipid",
++ .modalias = "panel-n800",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+@@ -567,6 +702,7 @@ static struct platform_device *n800_devices[] __initdata = {
+ #if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
+ &n800_keypad_led_device,
+ #endif
++ &n800_dss_device,
+ };
+
+ #ifdef CONFIG_MENELAUS
+@@ -689,9 +825,10 @@ void __init nokia_n800_common_init(void)
+ if (machine_is_nokia_n810())
+ i2c_register_board_info(2, n810_i2c_board_info_2,
+ ARRAY_SIZE(n810_i2c_board_info_2));
+-
+- mipid_dev_init();
+- blizzard_dev_init();
++
++ //mipid_dev_init();
++ //blizzard_dev_init();
++ n800_display_init();
+ }
+
+ static void __init nokia_n800_init(void)
+@@ -712,6 +849,7 @@ void __init nokia_n800_map_io(void)
+ omap_board_config_size = ARRAY_SIZE(n800_config);
+
+ omap2_set_globals_242x();
++ omap2_set_sdram_vram(800 * 480 * 2 * 3, 0);
+ omap2_map_common_io();
+ }
+
+diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
+index b54c955..4e9211e 100644
+--- a/drivers/video/omap2/Kconfig
++++ b/drivers/video/omap2/Kconfig
+@@ -49,4 +49,14 @@ config PANEL_SHARP_LS037V7DW01
+ help
+ LCD Panel used in TI's SDP3430 and EVM boards
+
++config PANEL_N800
++ tristate "panel n800"
++ help
++ N800 LCD
++
++config CTRL_BLIZZARD
++ tristate "blizzard ctrl"
++ help
++ Blizzard Ctrl
++
+ endmenu
+diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
+index fe6858e..7727f9c 100644
+--- a/drivers/video/omap2/Makefile
++++ b/drivers/video/omap2/Makefile
+@@ -3,3 +3,6 @@ omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
+
+ obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
+ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
++
++obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o
++obj-$(CONFIG_PANEL_N800) += panel-n800.o
+diff --git a/drivers/video/omap2/ctrl-blizzard.c b/drivers/video/omap2/ctrl-blizzard.c
+new file mode 100644
+index 0000000..e1e5569
+--- /dev/null
++++ b/drivers/video/omap2/ctrl-blizzard.c
+@@ -0,0 +1,279 @@
++
++//#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++
++#include <mach/display.h>
++#include <mach/dma.h>
++
++#ifdef DEBUG
++#define DBG(format, ...) printk(KERN_DEBUG "Blizzard: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define BLIZZARD_REV_CODE 0x00
++#define BLIZZARD_CONFIG 0x02
++#define BLIZZARD_PLL_DIV 0x04
++#define BLIZZARD_PLL_LOCK_RANGE 0x06
++#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08
++#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a
++#define BLIZZARD_PLL_MODE 0x0c
++#define BLIZZARD_CLK_SRC 0x0e
++#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10
++#define BLIZZARD_MEM_BANK0_STATUS 0x14
++#define BLIZZARD_PANEL_CONFIGURATION 0x28
++#define BLIZZARD_HDISP 0x2a
++#define BLIZZARD_HNDP 0x2c
++#define BLIZZARD_VDISP0 0x2e
++#define BLIZZARD_VDISP1 0x30
++#define BLIZZARD_VNDP 0x32
++#define BLIZZARD_HSW 0x34
++#define BLIZZARD_VSW 0x38
++#define BLIZZARD_DISPLAY_MODE 0x68
++#define BLIZZARD_INPUT_WIN_X_START_0 0x6c
++#define BLIZZARD_DATA_SOURCE_SELECT 0x8e
++#define BLIZZARD_DISP_MEM_DATA_PORT 0x90
++#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92
++#define BLIZZARD_POWER_SAVE 0xE6
++#define BLIZZARD_NDISP_CTRL_STATUS 0xE8
++
++/* Data source select */
++/* For S1D13745 */
++#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00
++#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01
++#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04
++#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05
++/* For S1D13744 */
++#define BLIZZARD_SRC_WRITE_LCD 0x00
++#define BLIZZARD_SRC_BLT_LCD 0x06
++
++#define BLIZZARD_COLOR_RGB565 0x01
++#define BLIZZARD_COLOR_YUV420 0x09
++
++#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */
++#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */
++
++#define BLIZZARD_AUTO_UPDATE_TIME (HZ / 20)
++
++
++
++static struct {
++ int version;
++} blizzard;
++
++
++static inline void blizzard_cmd(u8 cmd)
++{
++ omap_rfbi_write_command(&cmd, 1);
++}
++
++static inline void blizzard_write(u8 cmd, const u8 *buf, int len)
++{
++ omap_rfbi_write_command(&cmd, 1);
++ omap_rfbi_write_data(buf, len);
++}
++
++static inline void blizzard_read(u8 cmd, u8 *buf, int len)
++{
++ omap_rfbi_write_command(&cmd, 1);
++ omap_rfbi_read_data(buf, len);
++}
++
++static u8 blizzard_read_reg(u8 cmd)
++{
++ u8 data;
++ blizzard_read(cmd, &data, 1);
++ return data;
++}
++
++static int blizzard_ctrl_init(struct omap_display *display)
++{
++ DBG("blizzard_ctrl_init\n");
++
++ return 0;
++}
++
++
++static int blizzard_ctrl_enable(struct omap_display *display)
++{
++ int r = 0;
++ u8 rev, conf;
++
++ DBG("blizzard_ctrl_enable\n");
++
++ if (display->hw_config.ctrl_enable) {
++ r = display->hw_config.ctrl_enable(display);
++ if (r)
++ return r;
++ }
++
++ msleep(100);
++
++ rev = blizzard_read_reg(BLIZZARD_CLK_SRC);
++ printk("CLK_SRC %x\n", rev);
++
++ rev = blizzard_read_reg(BLIZZARD_PLL_DIV);
++ printk("PLLDIV %x\n", rev);
++
++ rev = blizzard_read_reg(BLIZZARD_REV_CODE);
++ conf = blizzard_read_reg(BLIZZARD_CONFIG);
++
++ printk("rev %x, conf %x\n", rev, conf);
++
++ switch (rev & 0xfc) {
++ case 0x9c:
++ blizzard.version = BLIZZARD_VERSION_S1D13744;
++ pr_info("omapfb: s1d13744 LCD controller rev %d "
++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
++ break;
++ case 0xa4:
++ blizzard.version = BLIZZARD_VERSION_S1D13745;
++ pr_info("omapfb: s1d13745 LCD controller rev %d "
++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
++ break;
++ default:
++ printk("invalid s1d1374x revision %02x\n",
++ rev);
++ r = -ENODEV;
++ }
++
++ return r;
++}
++
++static void blizzard_ctrl_disable(struct omap_display *display)
++{
++ DBG("blizzard_ctrl_disable\n");
++
++ if (display->hw_config.ctrl_disable)
++ display->hw_config.ctrl_disable(display);
++}
++
++int rfbi_configure(int rfbi_module, int bpp, int lines);
++
++static void blizzard_ctrl_setup_update(struct omap_display *display,
++ int x, int y, int w, int h)
++{
++ u8 tmp[18];
++ int x_end, y_end;
++
++ DBG("blizzard_ctrl_setup_update\n");
++
++ x_end = x + w - 1;
++ y_end = y + h - 1;
++
++ tmp[0] = x;
++ tmp[1] = x >> 8;
++ tmp[2] = y;
++ tmp[3] = y >> 8;
++ tmp[4] = x_end;
++ tmp[5] = x_end >> 8;
++ tmp[6] = y_end;
++ tmp[7] = y_end >> 8;
++
++ /* scaling? */
++ tmp[8] = x;
++ tmp[9] = x >> 8;
++ tmp[10] = y;
++ tmp[11] = y >> 8;
++ tmp[12] = x_end;
++ tmp[13] = x_end >> 8;
++ tmp[14] = y_end;
++ tmp[15] = y_end >> 8;
++
++ tmp[16] = BLIZZARD_COLOR_RGB565; //color_mode;
++
++ if (blizzard.version == BLIZZARD_VERSION_S1D13745)
++ tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND;
++ else
++ tmp[17] = blizzard.version == BLIZZARD_VERSION_S1D13744 ?
++ BLIZZARD_SRC_WRITE_LCD :
++ BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE;
++
++ rfbi_configure(display->hw_config.u.rfbi.channel,
++ 16,
++ 8);
++
++ blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18);
++
++ rfbi_configure(display->hw_config.u.rfbi.channel,
++ 16,
++ 16);
++}
++
++static int blizzard_ctrl_enable_te(struct omap_display *display, int enable)
++{
++ return 0;
++}
++
++static int blizzard_ctrl_rotate(struct omap_display *display, int rotate)
++{
++ return 0;
++}
++
++static int blizzard_ctrl_mirror(struct omap_display *display, int enable)
++{
++ return 0;
++}
++
++static int blizzard_run_test(struct omap_display *display, int test_num)
++{
++ return 0;
++}
++
++static struct omap_ctrl blizzard_ctrl = {
++ .owner = THIS_MODULE,
++ .name = "ctrl-blizzard",
++ .init = blizzard_ctrl_init,
++ .enable = blizzard_ctrl_enable,
++ .disable = blizzard_ctrl_disable,
++ .setup_update = blizzard_ctrl_setup_update,
++ .enable_te = blizzard_ctrl_enable_te,
++ .rotate = blizzard_ctrl_rotate,
++ .mirror = blizzard_ctrl_mirror,
++ .run_test = blizzard_run_test,
++ .pixel_size = 16,
++
++ .timings = {
++ .cs_on_time = 0,
++
++ .we_on_time = 9000,
++ .we_off_time = 18000,
++ .we_cycle_time = 36000,
++
++ .re_on_time = 9000,
++ .re_off_time = 27000,
++ .re_cycle_time = 36000,
++
++ .access_time = 27000,
++ .cs_off_time = 36000,
++
++ .cs_pulse_width = 0,
++ },
++};
++
++
++static int __init blizzard_init(void)
++{
++ DBG("blizzard_init\n");
++ omap_dss_register_ctrl(&blizzard_ctrl);
++ return 0;
++}
++
++static void __exit blizzard_exit(void)
++{
++ DBG("blizzard_exit\n");
++
++ omap_dss_unregister_ctrl(&blizzard_ctrl);
++}
++
++module_init(blizzard_init);
++module_exit(blizzard_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("Blizzard Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/panel-n800.c b/drivers/video/omap2/panel-n800.c
+new file mode 100644
+index 0000000..3ae0a16
+--- /dev/null
++++ b/drivers/video/omap2/panel-n800.c
+@@ -0,0 +1,437 @@
++
++/*#define DEBUG*/
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++#include <linux/jiffies.h>
++#include <linux/sched.h>
++#include <linux/backlight.h>
++#include <linux/fb.h>
++
++#include <mach/display.h>
++#include <mach/dma.h>
++
++#define MIPID_CMD_READ_DISP_ID 0x04
++#define MIPID_CMD_READ_RED 0x06
++#define MIPID_CMD_READ_GREEN 0x07
++#define MIPID_CMD_READ_BLUE 0x08
++#define MIPID_CMD_READ_DISP_STATUS 0x09
++#define MIPID_CMD_RDDSDR 0x0F
++#define MIPID_CMD_SLEEP_IN 0x10
++#define MIPID_CMD_SLEEP_OUT 0x11
++#define MIPID_CMD_DISP_OFF 0x28
++#define MIPID_CMD_DISP_ON 0x29
++
++#define MIPID_VER_LPH8923 3
++#define MIPID_VER_LS041Y3 4
++
++#define MIPID_ESD_CHECK_PERIOD msecs_to_jiffies(5000)
++
++#ifdef DEBUG
++#define DBG(format, ...) printk(KERN_DEBUG "PN800: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++struct pn800_device {
++ struct backlight_device *bl_dev;
++ int enabled;
++ int model;
++ int revision;
++ u8 display_id[3];
++ unsigned int saved_bklight_level;
++ unsigned long hw_guard_end; /* next value of jiffies
++ when we can issue the
++ next sleep in/out command */
++ unsigned long hw_guard_wait; /* max guard time in jiffies */
++
++ struct spi_device *spi;
++ struct mutex mutex;
++ struct omap_panel panel;
++ struct omap_display *display;
++};
++
++
++static void pn800_transfer(struct pn800_device *md, int cmd,
++ const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
++{
++ struct spi_message m;
++ struct spi_transfer *x, xfer[4];
++ u16 w;
++ int r;
++
++ BUG_ON(md->spi == NULL);
++
++ spi_message_init(&m);
++
++ memset(xfer, 0, sizeof(xfer));
++ x = &xfer[0];
++
++ cmd &= 0xff;
++ x->tx_buf = &cmd;
++ x->bits_per_word = 9;
++ x->len = 2;
++ spi_message_add_tail(x, &m);
++
++ if (wlen) {
++ x++;
++ x->tx_buf = wbuf;
++ x->len = wlen;
++ x->bits_per_word = 9;
++ spi_message_add_tail(x, &m);
++ }
++
++ if (rlen) {
++ x++;
++ x->rx_buf = &w;
++ x->len = 1;
++ spi_message_add_tail(x, &m);
++
++ if (rlen > 1) {
++ /* Arrange for the extra clock before the first
++ * data bit.
++ */
++ x->bits_per_word = 9;
++ x->len = 2;
++
++ x++;
++ x->rx_buf = &rbuf[1];
++ x->len = rlen - 1;
++ spi_message_add_tail(x, &m);
++ }
++ }
++
++ r = spi_sync(md->spi, &m);
++ if (r < 0)
++ dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
++
++ if (rlen)
++ rbuf[0] = w & 0xff;
++}
++
++static inline void pn800_cmd(struct pn800_device *md, int cmd)
++{
++ pn800_transfer(md, cmd, NULL, 0, NULL, 0);
++}
++
++static inline void pn800_write(struct pn800_device *md,
++ int reg, const u8 *buf, int len)
++{
++ pn800_transfer(md, reg, buf, len, NULL, 0);
++}
++
++static inline void pn800_read(struct pn800_device *md,
++ int reg, u8 *buf, int len)
++{
++ pn800_transfer(md, reg, NULL, 0, buf, len);
++}
++
++static void set_data_lines(struct pn800_device *md, int data_lines)
++{
++ u16 par;
++
++ switch (data_lines) {
++ case 16:
++ par = 0x150;
++ break;
++ case 18:
++ par = 0x160;
++ break;
++ case 24:
++ par = 0x170;
++ break;
++ }
++ pn800_write(md, 0x3a, (u8 *)&par, 2);
++}
++
++static void send_init_string(struct pn800_device *md)
++{
++ u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
++ int data_lines;
++
++ pn800_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
++
++ data_lines = (int)md->display->hw_config.priv; // XXX
++
++ set_data_lines(md, data_lines);
++}
++
++static void hw_guard_start(struct pn800_device *md, int guard_msec)
++{
++ md->hw_guard_wait = msecs_to_jiffies(guard_msec);
++ md->hw_guard_end = jiffies + md->hw_guard_wait;
++}
++
++static void hw_guard_wait(struct pn800_device *md)
++{
++ unsigned long wait = md->hw_guard_end - jiffies;
++
++ if ((long)wait > 0 && wait <= md->hw_guard_wait) {
++ set_current_state(TASK_UNINTERRUPTIBLE);
++ schedule_timeout(wait);
++ }
++}
++
++static void set_sleep_mode(struct pn800_device *md, int on)
++{
++ int cmd, sleep_time = 50;
++
++ if (on)
++ cmd = MIPID_CMD_SLEEP_IN;
++ else
++ cmd = MIPID_CMD_SLEEP_OUT;
++ hw_guard_wait(md);
++ pn800_cmd(md, cmd);
++ hw_guard_start(md, 120);
++ /*
++ * When we enable the panel, it seems we _have_ to sleep
++ * 120 ms before sending the init string. When disabling the
++ * panel we'll sleep for the duration of 2 frames, so that the
++ * controller can still provide the PCLK,HS,VS signals. */
++ if (!on)
++ sleep_time = 120;
++ msleep(sleep_time);
++}
++
++static void set_display_state(struct pn800_device *md, int enabled)
++{
++ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
++
++ pn800_cmd(md, cmd);
++}
++
++static int panel_enabled(struct pn800_device *md)
++{
++ u32 disp_status;
++ int enabled;
++
++ pn800_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
++ disp_status = __be32_to_cpu(disp_status);
++ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
++ dev_dbg(&md->spi->dev,
++ "LCD panel %s enabled by bootloader (status 0x%04x)\n",
++ enabled ? "" : "not ", disp_status);
++ DBG("status %#08x\n", disp_status);
++ return enabled;
++}
++
++static int panel_detect(struct pn800_device *md)
++{
++ pn800_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
++ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
++ md->display_id[0], md->display_id[1], md->display_id[2]);
++
++ switch (md->display_id[0]) {
++ case 0x45:
++ md->model = MIPID_VER_LPH8923;
++ md->panel.name = "lph8923";
++ break;
++ case 0x83:
++ md->model = MIPID_VER_LS041Y3;
++ md->panel.name = "ls041y3";
++ //md->esd_check = ls041y3_esd_check;
++ break;
++ default:
++ md->panel.name = "unknown";
++ dev_err(&md->spi->dev, "invalid display ID\n");
++ return -ENODEV;
++ }
++
++ md->revision = md->display_id[1];
++ pr_info("omapfb: %s rev %02x LCD detected\n",
++ md->panel.name, md->revision);
++
++ return 0;
++}
++
++
++
++static int pn800_panel_enable(struct omap_display *display)
++{
++ int r;
++ struct pn800_device *md =
++ (struct pn800_device *)display->panel->priv;
++
++ DBG("pn800_panel_enable\n");
++
++ mutex_lock(&md->mutex);
++
++ if (display->hw_config.panel_enable)
++ display->hw_config.panel_enable(display);
++
++ msleep(50); // wait for power up
++
++ r = panel_detect(md);
++ if (r) {
++ mutex_unlock(&md->mutex);
++ return r;
++ }
++
++ md->enabled = panel_enabled(md);
++
++ if (md->enabled) {
++ DBG("panel already enabled\n");
++ ; /*pn800_esd_start_check(md);*/
++ } else {
++ ; /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/
++ }
++
++
++ if (md->enabled) {
++ mutex_unlock(&md->mutex);
++ return 0;
++ }
++
++ set_sleep_mode(md, 0);
++ md->enabled = 1;
++ send_init_string(md);
++ set_display_state(md, 1);
++ //mipid_set_bklight_level(panel, md->saved_bklight_level);
++ //mipid_esd_start_check(md);
++
++ mutex_unlock(&md->mutex);
++ return 0;
++}
++
++static void pn800_panel_disable(struct omap_display *display)
++{
++ struct pn800_device *md =
++ (struct pn800_device *)display->panel->priv;
++
++ DBG("pn800_panel_disable\n");
++
++ mutex_lock(&md->mutex);
++
++ if (!md->enabled) {
++ mutex_unlock(&md->mutex);
++ return;
++ }
++ /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/
++ /*pn800_set_bklight_level(panel, 0);*/
++
++ set_display_state(md, 0);
++ set_sleep_mode(md, 1);
++ md->enabled = 0;
++
++
++ if (display->hw_config.panel_disable)
++ display->hw_config.panel_disable(display);
++
++ mutex_unlock(&md->mutex);
++}
++
++static int pn800_panel_init(struct omap_display *display)
++{
++ struct pn800_device *md =
++ (struct pn800_device *)display->panel->priv;
++
++ DBG("pn800_panel_init\n");
++
++ mutex_init(&md->mutex);
++ md->display = display;
++
++ return 0;
++}
++
++static int pn800_run_test(struct omap_display *display, int test_num)
++{
++ return 0;
++}
++
++static struct omap_panel pn800_panel = {
++ .owner = THIS_MODULE,
++ .name = "panel-pn800",
++ .init = pn800_panel_init,
++ /*.remove = pn800_cleanup,*/
++ .enable = pn800_panel_enable,
++ .disable = pn800_panel_disable,
++ //.set_mode = pn800_set_mode,
++ .run_test = pn800_run_test,
++
++ .timings = {
++ .x_res = 800,
++ .y_res = 480,
++
++ .pixel_clock = 21940,
++ .hsw = 50,
++ .hfp = 20,
++ .hbp = 15,
++
++ .vsw = 2,
++ .vfp = 1,
++ .vbp = 3,
++ },
++ .config = OMAP_DSS_LCD_TFT,
++
++ .bpp = 16,
++};
++
++static int pn800_spi_probe(struct spi_device *spi)
++{
++ struct pn800_device *md;
++
++ DBG("pn800_spi_probe\n");
++
++ md = kzalloc(sizeof(*md), GFP_KERNEL);
++ if (md == NULL) {
++ dev_err(&spi->dev, "out of memory\n");
++ return -ENOMEM;
++ }
++
++ spi->mode = SPI_MODE_0;
++ md->spi = spi;
++ dev_set_drvdata(&spi->dev, md);
++ md->panel = pn800_panel;
++ pn800_panel.priv = md;
++
++ omap_dss_register_panel(&pn800_panel);
++
++ return 0;
++}
++
++static int pn800_spi_remove(struct spi_device *spi)
++{
++ struct pn800_device *md = dev_get_drvdata(&spi->dev);
++
++ DBG("pn800_spi_remove\n");
++
++ omap_dss_unregister_panel(&pn800_panel);
++
++ /*pn800_disable(&md->panel);*/
++ kfree(md);
++
++ return 0;
++}
++
++static struct spi_driver pn800_spi_driver = {
++ .driver = {
++ .name = "panel-n800",
++ .bus = &spi_bus_type,
++ .owner = THIS_MODULE,
++ },
++ .probe = pn800_spi_probe,
++ .remove = __devexit_p(pn800_spi_remove),
++};
++
++static int __init pn800_init(void)
++{
++ DBG("pn800_init\n");
++ return spi_register_driver(&pn800_spi_driver);
++}
++
++static void __exit pn800_exit(void)
++{
++ DBG("pn800_exit\n");
++ spi_unregister_driver(&pn800_spi_driver);
++}
++
++module_init(pn800_init);
++module_exit(pn800_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("N800 LCD Driver");
++MODULE_LICENSE("GPL");
+--
+1.5.6.3
+
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 07:31:43 +0000