diff options
Diffstat (limited to 'recipes/linux/linux-omap-2.6.32')
3 files changed, 63 insertions, 169 deletions
diff --git a/recipes/linux/linux-omap-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch index 07f901c9a6..e69de29bb2 100644 --- a/recipes/linux/linux-omap-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch +++ b/recipes/linux/linux-omap-2.6.32/cm-t35/0001-omap3-cm-t35-add-mux-initialization.patch @@ -1,153 +0,0 @@ -Date: Wed, 09 Dec 2009 15:22:20 +0200 -From: Mike Rapoport <mike@compulab.co.il> -To: Koen Kooi <koen@dominion.thruhere.net> -Subject: Re: linux-omap 2.6.32 updates - - -Mike Rapoport wrote: ->> The tdo24m patch is indeed in the linux-omap tree and the mux patch should be ->> different for the updated linux-omap (at least with ->> SRCREV = "6833f1a8cdcb65a370f898bde6b6af63f81962df"). ->> ->> Attached the actual patch needed to initialize cm-t35 mux and updated recipe ->> diff that uses this patch. ->> ->> I don't know yet if Tony is going to merge my latest patches before the merge ->> window closes. If you're going to bump SRCREV once again in the next few days, ->> it's possible that cm-t35 patches won't be needed at all. - --- -Sincerely yours, -Mike. - - -diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig -index 16c0c13..66de47b 100644 ---- a/arch/arm/mach-omap2/Kconfig -+++ b/arch/arm/mach-omap2/Kconfig -@@ -136,6 +136,7 @@ config MACH_CM_T35 - bool "CompuLab CM-T35 module" - depends on ARCH_OMAP3 && ARCH_OMAP34XX - select OMAP_PACKAGE_CUS -+ select OMAP_MUX - - config MACH_IGEP0020 - bool "IGEP0020" -diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c -index 507c922..1591aae 100644 ---- a/arch/arm/mach-omap2/board-cm-t35.c -+++ b/arch/arm/mach-omap2/board-cm-t35.c -@@ -482,13 +482,98 @@ static void __init cm_t35_map_io(void) - omap2_map_common_io(); - } - --#ifdef CONFIG_OMAP_MUX - static struct omap_board_mux board_mux[] __initdata = { -+ /* nCS and IRQ for CM-T35 ethernet */ -+ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), -+ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), -+ -+ /* nCS and IRQ for SB-T35 ethernet */ -+ OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), -+ OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), -+ -+ /* PENDOWN GPIO */ -+ OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), -+ -+ /* mUSB */ -+ OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ -+ /* MMC 2 */ -+ OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), -+ -+ /* McSPI 1 */ -+ OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), -+ -+ /* McSPI 4 */ -+ OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), -+ -+ /* McBSP 2 */ -+ OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ -+ /* serial ports */ -+ OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), -+ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), -+ -+ /* DSS */ -+ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), -+ -+ /* TPS IRQ */ -+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ -+ OMAP_PIN_INPUT_PULLUP), -+ - { .reg_offset = OMAP_MUX_TERMINATOR }, - }; --#else --#define board_mux NULL --#endif - - static void __init cm_t35_init(void) - { -@@ -501,9 +586,6 @@ static void __init cm_t35_init(void) - cm_t35_init_led(); - - usb_musb_init(); -- -- omap_mux_init_signal("sys_nirq", -- OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); - } - - MACHINE_START(CM_T35, "Compulab CM-T35") - diff --git a/recipes/linux/linux-omap-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch b/recipes/linux/linux-omap-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch index 656ba85318..acffe95f36 100644 --- a/recipes/linux/linux-omap-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch +++ b/recipes/linux/linux-omap-2.6.32/dss2/0015-OMAP-DSS-Add-DSS2-support-for-Beagle.patch @@ -1,5 +1,15 @@ ---- /tmp/board-omap3beagle.c 2009-12-22 10:47:35.000000000 +0100 -+++ git/arch/arm/mach-omap2/board-omap3beagle.c 2009-12-22 10:59:53.000000000 +0100 +From: Steve Sakoman <steve@sakoman.com> +Date: Fri, 18 Dec 2009 19:48:53 +0000 (-0800) +Subject: OMAP: DSS: Add DSS2 support for Beagle +X-Git-Url: http://www.sakoman.com/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff_plain;h=7b5a8596f85382c7aa51971aa3889675e55a97b9 + +OMAP: DSS: Add DSS2 support for Beagle +--- + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 955da5b..f18c751 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -40,6 +40,7 @@ #include <plat/board.h> @@ -7,8 +17,8 @@ +#include <plat/display.h> #include <plat/gpmc.h> #include <plat/nand.h> - #include <plat/usb.h> -@@ -149,6 +150,105 @@ + #include <plat/mux.h> +@@ -149,6 +150,105 @@ static struct platform_device omap3beagle_nand_device = { .resource = &omap3beagle_nand_resource, }; @@ -114,7 +124,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" static struct twl4030_hsmmc_info mmc[] = { -@@ -168,15 +268,6 @@ +@@ -168,15 +268,6 @@ static struct twl4030_hsmmc_info mmc[] = { {} /* Terminator */ }; @@ -130,7 +140,7 @@ static struct regulator_consumer_supply beagle_vmmc1_supply = { .supply = "vmmc", }; -@@ -232,16 +323,6 @@ +@@ -232,16 +323,6 @@ static struct twl4030_gpio_platform_data beagle_gpio_data = { .setup = beagle_twl_gpio_setup, }; @@ -147,7 +157,7 @@ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data beagle_vmmc1 = { .constraints = { -@@ -419,14 +500,8 @@ +@@ -419,14 +500,8 @@ static struct platform_device keys_gpio = { }, }; @@ -162,7 +172,7 @@ omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); -@@ -437,9 +512,9 @@ +@@ -437,9 +512,9 @@ static void __init omap3_beagle_init_irq(void) } static struct platform_device *omap3_beagle_devices[] __initdata = { @@ -173,14 +183,12 @@ }; static void __init omap3beagle_flash_init(void) -@@ -522,8 +597,9 @@ +@@ -513,6 +588,8 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); --} - + omap_cfg_reg(H16_34XX_SDRC_CKE0); + omap_cfg_reg(H17_34XX_SDRC_CKE1); ++ + beagle_display_init(); -+} + } + static void __init omap3_beagle_map_io(void) - { - omap2_set_globals_343x(); diff --git a/recipes/linux/linux-omap-2.6.32/holes.patch b/recipes/linux/linux-omap-2.6.32/holes.patch new file mode 100644 index 0000000000..504bf40021 --- /dev/null +++ b/recipes/linux/linux-omap-2.6.32/holes.patch @@ -0,0 +1,39 @@ +From patchwork Thu Jan 7 12:30:08 2010 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP +Date: Thu, 07 Jan 2010 12:30:08 -0000 +From: Sriram <srk@ti.com> +X-Patchwork-Id: 71579 + +From: Sriram <srk@ti.com> + +OMAP platforms(like OMAP3530) include DSP or other co-processors +for media acceleration. when carving out memory for the +accelerators we can end up creating a hole in the memory map +of sort: +<kernel memory><hole(memory for accelerator)><kernel memory> + +To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL +has to be enabled. For further information refer discussion at: +http://www.mail-archive.com/linux-omap@vger.kernl.org/msg15262.html. + +Signed-off-by: Sriramakrishnan <srk@ti.com> + +--- +arch/arm/Kconfig | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 5e0bcc5..88f628b 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -699,6 +699,7 @@ config ARCH_OMAP + select ARCH_HAS_CPUFREQ + select GENERIC_TIME + select GENERIC_CLOCKEVENTS ++ select ARCH_HAS_HOLES_MEMORYMODEL + help + Support for TI's OMAP platform (OMAP1 and OMAP2). + |