diff options
Diffstat (limited to 'recipes/linux/linux-2.6.21/270-usb-gadget-udc.patch')
| -rw-r--r-- | recipes/linux/linux-2.6.21/270-usb-gadget-udc.patch | 2739 |
1 files changed, 2739 insertions, 0 deletions
diff --git a/recipes/linux/linux-2.6.21/270-usb-gadget-udc.patch b/recipes/linux/linux-2.6.21/270-usb-gadget-udc.patch new file mode 100644 index 0000000000..630d188ea0 --- /dev/null +++ b/recipes/linux/linux-2.6.21/270-usb-gadget-udc.patch @@ -0,0 +1,2739 @@ +Index: linux-2.6.21gum/drivers/usb/gadget/Kconfig +=================================================================== +--- linux-2.6.21gum.orig/drivers/usb/gadget/Kconfig ++++ linux-2.6.21gum/drivers/usb/gadget/Kconfig +@@ -129,6 +129,28 @@ config USB_PXA2XX_SMALL + default y if USB_ETH + default y if USB_G_SERIAL + ++config USB_GADGET_PXA27X ++ boolean "PXA 27x" ++ depends on ARCH_PXA && PXA27x ++ help ++ Intel's PXA 27x series XScale ARM-5TE processors include ++ an integrated full speed USB 1.1 device controller. ++ ++ Say "y" to link the driver statically, or "m" to build a ++ dynamically linked module called "pxa27x_udc" and force all ++ gadget drivers to also be dynamically linked. ++ ++config USB_PXA27X ++ tristate ++ depends on USB_GADGET_PXA27X ++ default USB_GADGET ++ select USB_GADGET_SELECTED ++ ++config USB_PXA27X_DMA ++ bool # "Use DMA support" ++ depends on USB_GADGET_PXA27X ++ default n ++ + config USB_GADGET_GOKU + boolean "Toshiba TC86C001 'Goku-S'" + depends on PCI +Index: linux-2.6.21gum/drivers/usb/gadget/Makefile +=================================================================== +--- linux-2.6.21gum.orig/drivers/usb/gadget/Makefile ++++ linux-2.6.21gum/drivers/usb/gadget/Makefile +@@ -7,6 +7,7 @@ obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o + obj-$(CONFIG_USB_GOKU) += goku_udc.o + obj-$(CONFIG_USB_OMAP) += omap_udc.o + obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o ++obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o + obj-$(CONFIG_USB_AT91) += at91_udc.o + obj-$(CONFIG_USB_GADGET_GUMSTIX) += gumstix_gadget.o + +Index: linux-2.6.21gum/drivers/usb/gadget/pxa27x_udc.c +=================================================================== +--- /dev/null ++++ linux-2.6.21gum/drivers/usb/gadget/pxa27x_udc.c +@@ -0,0 +1,2352 @@ ++/* ++ * linux/drivers/usb/gadget/pxa27x_udc.c ++ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers ++ * ++ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) ++ * Copyright (C) 2003 Robert Schwebel, Pengutronix ++ * Copyright (C) 2003 Benedikt Spranger, Pengutronix ++ * Copyright (C) 2003 David Brownell ++ * Copyright (C) 2003 Joshua Wise ++ * Copyright (C) 2004 Intel Corporation ++ * Copyright (C) 2005 SDG Systems, LLC (Aric Blumer) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ */ ++ ++#undef DEBUG ++ // #define DEBUG 1 ++ //#define VERBOSE DBG_VERBOSE ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/ioport.h> ++#include <linux/types.h> ++#include <linux/version.h> ++#include <linux/errno.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/proc_fs.h> ++#include <linux/mm.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++#include <linux/irq.h> ++ ++#include <asm/byteorder.h> ++#include <asm/dma.h> ++#include <asm/io.h> ++#include <asm/system.h> ++#include <asm/mach-types.h> ++#include <asm/unaligned.h> ++#include <asm/hardware.h> ++#include <asm/mach/irq.h> ++#include <asm/arch/pxa-regs.h> ++ ++#include <linux/usb/ch9.h> ++#include <linux/usb_gadget.h> ++ ++#include <asm/arch/udc.h> ++ ++ ++/* ++ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27777777x ++ * series processors. ++ * Such controller drivers work with a gadget driver. The gadget driver ++ * returns descriptors, implements configuration and data protocols used ++ * by the host to interact with this device, and allocates endpoints to ++ * the different protocol interfaces. The controller driver virtualizes ++ * usb hardware so that the gadget drivers will be more portable. ++ * ++ * This UDC hardware wants to implement a bit too much USB protocol, so ++ * it constrains the sorts of USB configuration change events that work. ++ * The errata for these chips are misleading; some "fixed" bugs from ++ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. ++ */ ++ ++#define DRIVER_VERSION "21-Jul-2005" ++#define DRIVER_DESC "PXA 27x USB Device Controller driver" ++ ++ ++static const char driver_name [] = "pxa27x_udc"; ++ ++static const char ep0name [] = "ep0"; ++ ++ ++#define USE_DMA ++//#define DISABLE_TEST_MODE ++ ++#ifdef CONFIG_PROC_FS ++#define UDC_PROC_FILE ++#endif ++ ++#include "pxa27x_udc.h" ++ ++#if 0 ++#ifdef CONFIG_EMBEDDED ++/* few strings, and little code to use them */ ++#undef DEBUG ++#undef UDC_PROC_FILE ++#endif ++#endif ++ ++#ifdef USE_DMA ++static int use_dma = 1; ++module_param(use_dma, bool, 0); ++MODULE_PARM_DESC (use_dma, "true to use dma"); ++ ++static void dma_nodesc_handler (int dmach, void *_ep); ++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req); ++ ++#define DMASTR " (dma support)" ++ ++#else /* !USE_DMA */ ++#define DMASTR " (pio only)" ++#endif ++ ++#ifdef CONFIG_USB_PXA27X_SMALL ++#define SIZE_STR " (small)" ++#else ++#define SIZE_STR "" ++#endif ++ ++#ifdef DISABLE_TEST_MODE ++/* (mode == 0) == no undocumented chip tweaks ++ * (mode & 1) == double buffer bulk IN ++ * (mode & 2) == double buffer bulk OUT ++ * ... so mode = 3 (or 7, 15, etc) does it for both ++ */ ++static ushort fifo_mode = 0; ++module_param(fifo_mode, ushort, 0); ++MODULE_PARM_DESC (fifo_mode, "pxa27x udc fifo mode"); ++#endif ++ ++#define UDCISR0_IR0 0x3 ++#define UDCISR_INT_MASK (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP) ++#define UDCICR_INT_MASK UDCISR_INT_MASK ++ ++#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME) ++/* --------------------------------------------------------------------------- ++ * endpoint related parts of the api to the usb controller hardware, ++ * used by gadget driver; and the inner talker-to-hardware core. ++ * --------------------------------------------------------------------------- ++ */ ++ ++static void pxa27x_ep_fifo_flush (struct usb_ep *ep); ++static void nuke (struct pxa27x_ep *, int status); ++ ++static void pio_irq_enable(int ep_num) ++{ ++ if (ep_num < 16) ++ UDCICR0 |= 3 << (ep_num * 2); ++ else { ++ ep_num -= 16; ++ UDCICR1 |= 3 << (ep_num * 2); ++ } ++} ++ ++static void pio_irq_disable(int ep_num) ++{ ++ ep_num &= 0xf; ++ if (ep_num < 16) ++ UDCICR0 &= ~(3 << (ep_num * 2)); ++ else { ++ ep_num -= 16; ++ UDCICR1 &= ~(3 << (ep_num * 2)); ++ } ++} ++ ++/* The UDCCR reg contains mask and interrupt status bits, ++ * so using '|=' isn't safe as it may ack an interrupt. ++ */ ++#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE) ++ ++static inline void udc_set_mask_UDCCR(int mask) ++{ ++ UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); ++} ++ ++static inline void udc_clear_mask_UDCCR(int mask) ++{ ++ UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); ++} ++ ++static inline void udc_ack_int_UDCCR(int mask) ++{ ++ /* udccr contains the bits we dont want to change */ ++ __u32 udccr = UDCCR & UDCCR_MASK_BITS; ++ ++ UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); ++} ++ ++/* ++ * endpoint enable/disable ++ * ++ * we need to verify the descriptors used to enable endpoints. since pxa27x ++ * endpoint configurations are fixed, and are pretty much always enabled, ++ * there's not a lot to manage here. ++ * ++ * because pxa27x can't selectively initialize bulk (or interrupt) endpoints, ++ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except ++ * for a single interface (with only the default altsetting) and for gadget ++ * drivers that don't halt endpoints (not reset by set_interface). that also ++ * means that if you use ISO, you must violate the USB spec rule that all ++ * iso endpoints must be in non-default altsettings. ++ */ ++static int pxa27x_ep_enable (struct usb_ep *_ep, ++ const struct usb_endpoint_descriptor *desc) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_udc *dev; ++ ++ ep = container_of (_ep, struct pxa27x_ep, ep); ++ if (!_ep || !desc || _ep->name == ep0name ++ || desc->bDescriptorType != USB_DT_ENDPOINT ++ || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { ++ DMSG("%s, bad ep or descriptor\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* xfer types must match, except that interrupt ~= bulk */ ++ if( ep->ep_type != USB_ENDPOINT_XFER_BULK ++ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { ++ DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); ++ return -EINVAL; ++ } ++ ++ /* hardware _could_ do smaller, but driver doesn't */ ++ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK ++ && le16_to_cpu (desc->wMaxPacketSize) ++ != BULK_FIFO_SIZE) ++ || !desc->wMaxPacketSize) { ++ DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); ++ return -ERANGE; ++ } ++ ++ dev = ep->dev; ++ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { ++ DMSG("%s, bogus device state\n", __FUNCTION__); ++ return -ESHUTDOWN; ++ } ++ ++ ep->desc = desc; ++ ep->dma = -1; ++ ep->stopped = 0; ++ ep->pio_irqs = ep->dma_irqs = 0; ++ ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize); ++ ++ /* flush fifo (mostly for OUT buffers) */ ++ pxa27x_ep_fifo_flush (_ep); ++ ++ /* ... reset halt state too, if we could ... */ ++ ++#ifdef USE_DMA ++ /* for (some) bulk and ISO endpoints, try to get a DMA channel and ++ * bind it to the endpoint. otherwise use PIO. ++ */ ++ DMSG("%s: called attributes=%d\n", __FUNCTION__, ep->ep_type); ++ switch (ep->ep_type) { ++ case USB_ENDPOINT_XFER_ISOC: ++ if (le16_to_cpu(desc->wMaxPacketSize) % 32) ++ break; ++ // fall through ++ case USB_ENDPOINT_XFER_BULK: ++ if (!use_dma || !ep->reg_drcmr) ++ break; ++ ep->dma = pxa_request_dma ((char *)_ep->name, ++ (le16_to_cpu (desc->wMaxPacketSize) > 64) ++ ? DMA_PRIO_MEDIUM /* some iso */ ++ : DMA_PRIO_LOW, ++ dma_nodesc_handler, ep); ++ if (ep->dma >= 0) { ++ *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma; ++ DMSG("%s using dma%d\n", _ep->name, ep->dma); ++ } ++ default: ++ break; ++ } ++#endif ++ DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); ++ return 0; ++} ++ ++static int pxa27x_ep_disable (struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of (_ep, struct pxa27x_ep, ep); ++ if (!_ep || !ep->desc) { ++ DMSG("%s, %s not enabled\n", __FUNCTION__, ++ _ep ? ep->ep.name : NULL); ++ return -EINVAL; ++ } ++ nuke (ep, -ESHUTDOWN); ++ ++#ifdef USE_DMA ++ if (ep->dma >= 0) { ++ *ep->reg_drcmr = 0; ++ pxa_free_dma (ep->dma); ++ ep->dma = -1; ++ } ++#endif ++ ++ /* flush fifo (mostly for IN buffers) */ ++ pxa27x_ep_fifo_flush (_ep); ++ ++ ep->desc = 0; ++ ep->stopped = 1; ++ ++ DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* for the pxa27x, these can just wrap kmalloc/kfree. gadget drivers ++ * must still pass correctly initialized endpoints, since other controller ++ * drivers may care about how it's currently set up (dma issues etc). ++ */ ++ ++/* ++ * pxa27x_ep_alloc_request - allocate a request data structure ++ */ ++static struct usb_request * ++pxa27x_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags) ++{ ++ struct pxa27x_request *req; ++ ++ req = kmalloc (sizeof *req, gfp_flags); ++ if (!req) ++ return 0; ++ ++ memset (req, 0, sizeof *req); ++ INIT_LIST_HEAD (&req->queue); ++ return &req->req; ++} ++ ++ ++/* ++ * pxa27x_ep_free_request - deallocate a request data structure ++ */ ++static void ++pxa27x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct pxa27x_request *req; ++ ++ req = container_of(_req, struct pxa27x_request, req); ++ WARN_ON (!list_empty (&req->queue)); ++ kfree(req); ++} ++ ++ ++/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's ++ * no device-affinity and the heap works perfectly well for i/o buffers. ++ * It wastes much less memory than dma_alloc_coherent() would, and even ++ * prevents cacheline (32 bytes wide) sharing problems. ++ */ ++static void * ++pxa27x_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, ++ dma_addr_t *dma, unsigned gfp_flags) ++{ ++ char *retval; ++ ++ retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM)); ++ if (retval) ++ *dma = virt_to_bus (retval); ++ return retval; ++} ++ ++static void ++pxa27x_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, ++ unsigned bytes) ++{ ++ kfree (buf); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * done - retire a request; caller blocked irqs ++ */ ++static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status) ++{ ++ list_del_init(&req->queue); ++ if (likely (req->req.status == -EINPROGRESS)) ++ req->req.status = status; ++ else ++ status = req->req.status; ++ ++ if (status && status != -ESHUTDOWN) ++ DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", ++ ep->ep.name, &req->req, status, ++ req->req.actual, req->req.length); ++ ++ /* don't modify queue heads during completion callback */ ++ req->req.complete(&ep->ep, &req->req); ++} ++ ++ ++static inline void ep0_idle (struct pxa27x_udc *dev) ++{ ++ dev->ep0state = EP0_IDLE; ++ LED_EP0_OFF; ++} ++ ++static int ++write_packet(volatile u32 *uddr, struct pxa27x_request *req, unsigned max) ++{ ++ u32 *buf; ++ int length, count, remain; ++ ++ buf = (u32*)(req->req.buf + req->req.actual); ++ prefetch(buf); ++ ++ /* how big will this packet be? */ ++ length = min(req->req.length - req->req.actual, max); ++ req->req.actual += length; ++ ++ remain = length & 0x3; ++ count = length & ~(0x3); ++ ++ while (likely(count)) { ++ *uddr = *buf++; ++ count -= 4; ++ } ++ ++ if (remain) { ++ volatile u8* reg=(u8*)uddr; ++ char *rd =(u8*)buf; ++ ++ while (remain--) { ++ *reg=*rd++; ++ } ++ } ++ ++ return length; ++} ++ ++/* ++ * write to an IN endpoint fifo, as many packets as possible. ++ * irqs will use this to write the rest later. ++ * caller guarantees at least one packet buffer is ready (or a zlp). ++ */ ++static int ++write_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ unsigned max; ++ ++ max = le16_to_cpu(ep->desc->wMaxPacketSize); ++ do { ++ int count; ++ int is_last, is_short; ++ ++ count = write_packet(ep->reg_udcdr, req, max); ++ ++ /* last packet is usually short (or a zlp) */ ++ if (unlikely (count != max)) ++ is_last = is_short = 1; ++ else { ++ if (likely(req->req.length != req->req.actual) ++ || req->req.zero) ++ is_last = 0; ++ else ++ is_last = 1; ++ /* interrupt/iso maxpacket may not fill the fifo */ ++ is_short = unlikely (max < ep->fifo_size); ++ } ++ ++ DMSG("wrote %s count:%d bytes%s%s %d left %p\n", ++ ep->ep.name, count, ++ is_last ? "/L" : "", is_short ? "/S" : "", ++ req->req.length - req->req.actual, &req->req); ++ ++ /* let loose that packet. maybe try writing another one, ++ * double buffering might work. TSP, TPC, and TFS ++ * bit values are the same for all normal IN endpoints. ++ */ ++ *ep->reg_udccsr = UDCCSR_PC; ++ if (is_short) ++ *ep->reg_udccsr = UDCCSR_SP; ++ ++ /* requests complete when all IN data is in the FIFO */ ++ if (is_last) { ++ done (ep, req, 0); ++ if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) { ++ pio_irq_disable (ep->ep_num); ++#ifdef USE_DMA ++ /* unaligned data and zlps couldn't use dma */ ++ if (unlikely(!list_empty(&ep->queue))) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, queue); ++ kick_dma(ep,req); ++ return 0; ++ } ++#endif ++ } ++ return 1; ++ } ++ ++ // TODO experiment: how robust can fifo mode tweaking be? ++ // double buffering is off in the default fifo mode, which ++ // prevents TFS from being set here. ++ ++ } while (*ep->reg_udccsr & UDCCSR_FS); ++ return 0; ++} ++ ++/* caller asserts req->pending (ep0 irq status nyet cleared); starts ++ * ep0 data stage. these chips want very simple state transitions. ++ */ ++static inline ++void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag) ++{ ++ UDCCSR0 = flags|UDCCSR0_SA|UDCCSR0_OPC; ++ UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP); ++ dev->req_pending = 0; ++ DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", ++ __FUNCTION__, tag, UDCCSR0, flags); ++} ++ ++static int ++write_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ unsigned count; ++ int is_short; ++ ++ count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE); ++ ep->dev->stats.write.bytes += count; ++ ++ /* last packet "must be" short (or a zlp) */ ++ is_short = (count != EP0_FIFO_SIZE); ++ ++ DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, ++ req->req.length - req->req.actual, &req->req); ++ ++ if (unlikely (is_short)) { ++ if (ep->dev->req_pending) ++ ep0start(ep->dev, UDCCSR0_IPR, "short IN"); ++ else ++ UDCCSR0 = UDCCSR0_IPR; ++ ++ count = req->req.length; ++ done (ep, req, 0); ++ ep0_idle(ep->dev); ++#if 0 ++ /* This seems to get rid of lost status irqs in some cases: ++ * host responds quickly, or next request involves config ++ * change automagic, or should have been hidden, or ... ++ * ++ * FIXME get rid of all udelays possible... ++ */ ++ if (count >= EP0_FIFO_SIZE) { ++ count = 100; ++ do { ++ if ((UDCCSR0 & UDCCSR0_OPC) != 0) { ++ /* clear OPC, generate ack */ ++ UDCCSR0 = UDCCSR0_OPC; ++ break; ++ } ++ count--; ++ udelay(1); ++ } while (count); ++ } ++#endif ++ } else if (ep->dev->req_pending) ++ ep0start(ep->dev, 0, "IN"); ++ return is_short; ++} ++ ++ ++/* ++ * read_fifo - unload packet(s) from the fifo we use for usb OUT ++ * transfers and put them into the request. caller should have made ++ * sure there's at least one packet ready. ++ * ++ * returns true if the request completed because of short packet or the ++ * request buffer having filled (and maybe overran till end-of-packet). ++ */ ++static int ++read_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ for (;;) { ++ u32 *buf; ++ int bufferspace, count, is_short; ++ ++ /* make sure there's a packet in the FIFO.*/ ++ if (unlikely ((*ep->reg_udccsr & UDCCSR_PC) == 0)) ++ break; ++ buf =(u32*) (req->req.buf + req->req.actual); ++ prefetchw(buf); ++ bufferspace = req->req.length - req->req.actual; ++ ++ /* read all bytes from this packet */ ++ if (likely (*ep->reg_udccsr & UDCCSR_BNE)) { ++ count = 0x3ff & *ep->reg_udcbcr; ++ req->req.actual += min (count, bufferspace); ++ } else /* zlp */ ++ count = 0; ++ ++ is_short = (count < ep->ep.maxpacket); ++ DMSG("read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n", ++ ep->ep.name, *ep->reg_udccsr, count, ++ is_short ? "/S" : "", ++ &req->req, req->req.actual, req->req.length); ++ ++// dump_regs(ep->ep_num ); ++ count = min(count, bufferspace); ++ while (likely (count > 0)) { ++ *buf++ = *ep->reg_udcdr; ++ count -= 4; ++ } ++ DMSG("Buf:0x%p\n", req->req.buf); ++ ++ *ep->reg_udccsr = UDCCSR_PC; ++ /* RPC/RSP/RNE could now reflect the other packet buffer */ ++ ++ /* completion */ ++ if (is_short || req->req.actual == req->req.length) { ++ done (ep, req, 0); ++ if (list_empty(&ep->queue)) ++ pio_irq_disable (ep->ep_num); ++ return 1; ++ } ++ ++ /* finished that packet. the next one may be waiting... */ ++ } ++ return 0; ++} ++ ++/* ++ * special ep0 version of the above. no UBCR0 or double buffering; status ++ * handshaking is magic. most device protocols don't need control-OUT. ++ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other ++ * protocols do use them. ++ */ ++static int ++read_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ u32 *buf, word; ++ unsigned bufferspace; ++ ++ buf = (u32*) (req->req.buf + req->req.actual); ++ bufferspace = req->req.length - req->req.actual; ++ ++ while (UDCCSR0 & UDCCSR0_RNE) { ++ word = UDCDR0; ++ ++ if (unlikely (bufferspace == 0)) { ++ /* this happens when the driver's buffer ++ * is smaller than what the host sent. ++ * discard the extra data. ++ */ ++ if (req->req.status != -EOVERFLOW) ++ DMSG("%s overflow\n", ep->ep.name); ++ req->req.status = -EOVERFLOW; ++ } else { ++ *buf++ = word; ++ req->req.actual += 4; ++ bufferspace -= 4; ++ } ++ } ++ ++ UDCCSR0 = UDCCSR0_OPC ; ++ ++ /* completion */ ++ if (req->req.actual >= req->req.length) ++ return 1; ++ ++ /* finished that packet. the next one may be waiting... */ ++ return 0; ++} ++ ++#ifdef USE_DMA ++ ++#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE) ++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ u32 dcmd = 0; ++ u32 len = req->req.length; ++ u32 buf = req->req.dma; ++ u32 fifo = io_v2p ((u32)ep->reg_udcdr); ++ ++ buf += req->req.actual; ++ len -= req->req.actual; ++ ep->dma_con = 0; ++ ++ DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n", ++ __FUNCTION__, &req->req, req->req.length, ++ req->req.actual,ep->dma); ++ ++ /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */ ++ DCSR(ep->dma) = DCSR_NODESC; ++ if (buf & 0x3) ++ DALGN |= 1 << ep->dma; ++ else ++ DALGN &= ~(1 << ep->dma); ++ ++ if (ep->dir_in) { ++ DSADR(ep->dma) = buf; ++ DTADR(ep->dma) = fifo; ++ if (len > MAX_IN_DMA) { ++ len= MAX_IN_DMA; ++ ep->dma_con =1 ; ++ } else if (len >= ep->ep.maxpacket) { ++ if ((ep->dma_con = (len % ep->ep.maxpacket) != 0)) ++ len = ep->ep.maxpacket; ++ } ++ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN ++ | DCMD_FLOWTRG | DCMD_INCSRCADDR; ++ } else { ++ DSADR(ep->dma) = fifo; ++ DTADR(ep->dma) = buf; ++ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN ++ | DCMD_FLOWSRC | DCMD_INCTRGADDR; ++ } ++ *ep->reg_udccsr = UDCCSR_DME; ++ DCMD(ep->dma) = dcmd; ++ DCSR(ep->dma) = DCSR_NODESC | DCSR_EORIRQEN \ ++ | ((ep->dir_in) ? DCSR_STOPIRQEN : 0); ++ *ep->reg_drcmr = ep->dma | DRCMR_MAPVLD; ++ DCSR(ep->dma) |= DCSR_RUN; ++} ++ ++static void cancel_dma(struct pxa27x_ep *ep) ++{ ++ struct pxa27x_request *req; ++ u32 tmp; ++ ++ if (DCSR(ep->dma) == 0 || list_empty(&ep->queue)) ++ return; ++ ++ DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma)); ++ DCSR(ep->dma) = 0; ++ while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0) ++ cpu_relax(); ++ ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ tmp = DCMD(ep->dma) & DCMD_LENGTH; ++ req->req.actual = req->req.length - tmp; ++ ++ /* the last tx packet may be incomplete, so flush the fifo. ++ * FIXME correct req.actual if we can ++ */ ++ *ep->reg_udccsr = UDCCSR_FEF; ++} ++ ++static void dma_nodesc_handler(int dmach, void *_ep) ++{ ++ struct pxa27x_ep *ep = _ep; ++ struct pxa27x_request *req, *req_next; ++ u32 dcsr, tmp, completed; ++ ++ local_irq_disable(); ++ ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ ++ DMSG("%s, buf:0x%p\n",__FUNCTION__, req->req.buf); ++ ++ ep->dma_irqs++; ++ ep->dev->stats.irqs++; ++ HEX_DISPLAY(ep->dev->stats.irqs); ++ ++ completed = 0; ++ ++ dcsr = DCSR(dmach); ++ DCSR(ep->dma) &= ~DCSR_RUN; ++ ++ if (dcsr & DCSR_BUSERR) { ++ DCSR(dmach) = DCSR_BUSERR; ++ printk(KERN_ERR " Buss Error\n"); ++ req->req.status = -EIO; ++ completed = 1; ++ } else if (dcsr & DCSR_ENDINTR) { ++ DCSR(dmach) = DCSR_ENDINTR; ++ if (ep->dir_in) { ++ tmp = req->req.length - req->req.actual; ++ /* Last packet is a short one*/ ++ if ( tmp < ep->ep.maxpacket) { ++ int count = 0; ++ ++ *ep->reg_udccsr = UDCCSR_SP | \ ++ (*ep->reg_udccsr & UDCCSR_MASK); ++ /*Wait for packet out */ ++ while( (count++ < 10000) && \ ++ !(*ep->reg_udccsr & UDCCSR_FS)); ++ if (count >= 10000) ++ DMSG("Failed to send packet\n"); ++ else ++ DMSG("%s: short packet sent len:%d," ++ "length:%d,actual:%d\n", __FUNCTION__, ++ tmp, req->req.length, req->req.actual); ++ req->req.actual = req->req.length; ++ completed = 1; ++ /* There are still packets to transfer */ ++ } else if ( ep->dma_con) { ++ DMSG("%s: more packets,length:%d,actual:%d\n", ++ __FUNCTION__,req->req.length, ++ req->req.actual); ++ req->req.actual += ep->ep.maxpacket; ++ completed = 0; ++ } else { ++ DMSG("%s: no more packets,length:%d," ++ "actual:%d\n", __FUNCTION__, ++ req->req.length, req->req.actual); ++ req->req.actual = req->req.length; ++ completed = 1; ++ } ++ } else { ++ req->req.actual = req->req.length; ++ completed = 1; ++ } ++ } else if (dcsr & DCSR_EORINTR) { //Only happened in OUT DMA ++ int remain,udccsr ; ++ ++ DCSR(dmach) = DCSR_EORINTR; ++ remain = DCMD(dmach) & DCMD_LENGTH; ++ req->req.actual = req->req.length - remain; ++ ++ udccsr = *ep->reg_udccsr; ++ if (udccsr & UDCCSR_SP) { ++ *ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK); ++ completed = 1; ++ } ++ DMSG("%s: length:%d actual:%d\n", ++ __FUNCTION__, req->req.length, req->req.actual); ++ } else ++ DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n", ++ __FUNCTION__, dmach, DCSR(dmach), DCMD(dmach)); ++ ++ if (likely(completed)) { ++ if (req->queue.next != &ep->queue) { ++ req_next = list_entry(req->queue.next, ++ struct pxa27x_request, queue); ++ kick_dma(ep, req_next); ++ } ++ done(ep, req, 0); ++ } else { ++ kick_dma(ep, req); ++ } ++ ++ local_irq_enable(); ++} ++ ++#endif ++/*-------------------------------------------------------------------------*/ ++ ++static int ++pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_request *req; ++ struct pxa27x_udc *dev; ++ unsigned long flags; ++ ++ req = container_of(_req, struct pxa27x_request, req); ++ if (unlikely (!_req || !_req->complete || !_req->buf|| ++ !list_empty(&req->queue))) { ++ DMSG("%s, bad params\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num); ++ ++ dev = ep->dev; ++ if (unlikely (!dev->driver ++ || dev->gadget.speed == USB_SPEED_UNKNOWN)) { ++ DMSG("%s, bogus device state\n", __FUNCTION__); ++ return -ESHUTDOWN; ++ } ++ ++ /* iso is always one packet per request, that's the only way ++ * we can report per-packet status. that also helps with dma. ++ */ ++ if (unlikely (ep->ep_type == USB_ENDPOINT_XFER_ISOC ++ && req->req.length > le16_to_cpu ++ (ep->desc->wMaxPacketSize))) ++ return -EMSGSIZE; ++ ++#ifdef USE_DMA ++ // FIXME caller may already have done the dma mapping ++ if (ep->dma >= 0) { ++ _req->dma = dma_map_single(dev->dev, _req->buf, _req->length, ++ (ep->dir_in) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); ++ } ++#endif ++ ++ DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", ++ _ep->name, _req, _req->length, _req->buf); ++ ++ local_irq_save(flags); ++ ++ _req->status = -EINPROGRESS; ++ _req->actual = 0; ++ ++ /* kickstart this i/o queue? */ ++ if (list_empty(&ep->queue) && !ep->stopped) { ++ if (ep->desc == 0 /* ep0 */) { ++ unsigned length = _req->length; ++ ++ switch (dev->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ dev->stats.write.ops++; ++ if (write_ep0_fifo(ep, req)) ++ req = 0; ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ dev->stats.read.ops++; ++ if (dev->req_pending) ++ ep0start(dev, UDCCSR0_IPR, "OUT"); ++ if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0 ++ && read_ep0_fifo(ep, req))) { ++ ep0_idle(dev); ++ done(ep, req, 0); ++ req = 0; ++ } ++ break; ++ case EP0_NO_ACTION: ++ ep0_idle(dev); ++ req=0; ++ break; ++ default: ++ DMSG("ep0 i/o, odd state %d\n", dev->ep0state); ++ local_irq_restore (flags); ++ return -EL2HLT; ++ } ++#ifdef USE_DMA ++ /* either start dma or prime pio pump */ ++ } else if (ep->dma >= 0) { ++ kick_dma(ep, req); ++#endif ++ /* can the FIFO can satisfy the request immediately? */ ++ } else if (ep->dir_in ++ && (*ep->reg_udccsr & UDCCSR_FS) != 0 ++ && write_fifo(ep, req)) { ++ req = 0; ++ } else if ((*ep->reg_udccsr & UDCCSR_FS) != 0 ++ && read_fifo(ep, req)) { ++ req = 0; ++ } ++ DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma); ++ if (likely (req && ep->desc) && ep->dma < 0) ++ pio_irq_enable(ep->ep_num); ++ } ++ ++ /* pio or dma irq handler advances the queue. */ ++ if (likely (req != 0)) ++ list_add_tail(&req->queue, &ep->queue); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++ ++/* ++ * nuke - dequeue ALL requests ++ */ ++static void nuke(struct pxa27x_ep *ep, int status) ++{ ++ struct pxa27x_request *req; ++ ++ /* called with irqs blocked */ ++#ifdef USE_DMA ++ if (ep->dma >= 0 && !ep->stopped) ++ cancel_dma(ep); ++#endif ++ while (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ done(ep, req, status); ++ } ++ if (ep->desc) ++ pio_irq_disable (ep->ep_num); ++} ++ ++ ++/* dequeue JUST ONE request */ ++static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_request *req; ++ unsigned long flags; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || ep->ep.name == ep0name) ++ return -EINVAL; ++ ++ local_irq_save(flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ list_for_each_entry (req, &ep->queue, queue) { ++ if (&req->req == _req) ++ break; ++ } ++ if (&req->req != _req) { ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++ ++#ifdef USE_DMA ++ if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) { ++ cancel_dma(ep); ++ done(ep, req, -ECONNRESET); ++ /* restart i/o */ ++ if (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, queue); ++ kick_dma(ep, req); ++ } ++ } else ++#endif ++ done(ep, req, -ECONNRESET); ++ ++ local_irq_restore(flags); ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value) ++{ ++ struct pxa27x_ep *ep; ++ unsigned long flags; ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (unlikely (!_ep ++ || (!ep->desc && ep->ep.name != ep0name)) ++ || ep->ep_type == USB_ENDPOINT_XFER_ISOC) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ if (value == 0) { ++ /* this path (reset toggle+halt) is needed to implement ++ * SET_INTERFACE on normal hardware. but it can't be ++ * done from software on the PXA UDC, and the hardware ++ * forgets to do it as part of SET_INTERFACE automagic. ++ */ ++ DMSG("only host can clear %s halt\n", _ep->name); ++ return -EROFS; ++ } ++ ++ local_irq_save(flags); ++ ++ if (ep->dir_in && ((*ep->reg_udccsr & UDCCSR_FS) == 0 ++ || !list_empty(&ep->queue))) { ++ local_irq_restore(flags); ++ return -EAGAIN; ++ } ++ ++ /* FST bit is the same for control, bulk in, bulk out, interrupt in */ ++ *ep->reg_udccsr = UDCCSR_FST|UDCCSR_FEF; ++ ++ /* ep0 needs special care */ ++ if (!ep->desc) { ++ start_watchdog(ep->dev); ++ ep->dev->req_pending = 0; ++ ep->dev->ep0state = EP0_STALL; ++ LED_EP0_OFF; ++ ++ /* and bulk/intr endpoints like dropping stalls too */ ++ } else { ++ unsigned i; ++ for (i = 0; i < 1000; i += 20) { ++ if (*ep->reg_udccsr & UDCCSR_SST) ++ break; ++ udelay(20); ++ } ++ } ++ local_irq_restore(flags); ++ ++ DBG(DBG_VERBOSE, "%s halt\n", _ep->name); ++ return 0; ++} ++ ++static int pxa27x_ep_fifo_status(struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -ENODEV; ++ } ++ /* pxa can't report unclaimed bytes from IN fifos */ ++ if (ep->dir_in) ++ return -EOPNOTSUPP; ++ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN ++ || (*ep->reg_udccsr & UDCCSR_FS) == 0) ++ return 0; ++ else ++ return (*ep->reg_udcbcr & 0xfff) + 1; ++} ++ ++static void pxa27x_ep_fifo_flush(struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return; ++ } ++ ++ /* toggle and halt bits stay unchanged */ ++ ++ /* for OUT, just read and discard the FIFO contents. */ ++ if (!ep->dir_in) { ++ while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0) ++ (void) *ep->reg_udcdr; ++ return; ++ } ++ ++ /* most IN status is the same, but ISO can't stall */ ++ *ep->reg_udccsr = UDCCSR_PC|UDCCSR_FST|UDCCSR_TRN ++ | (ep->ep_type == USB_ENDPOINT_XFER_ISOC) ++ ? 0 : UDCCSR_SST; ++} ++ ++ ++static struct usb_ep_ops pxa27x_ep_ops = { ++ .enable = pxa27x_ep_enable, ++ .disable = pxa27x_ep_disable, ++ ++ .alloc_request = pxa27x_ep_alloc_request, ++ .free_request = pxa27x_ep_free_request, ++ ++ .alloc_buffer = pxa27x_ep_alloc_buffer, ++ .free_buffer = pxa27x_ep_free_buffer, ++ ++ .queue = pxa27x_ep_queue, ++ .dequeue = pxa27x_ep_dequeue, ++ ++ .set_halt = pxa27x_ep_set_halt, ++ .fifo_status = pxa27x_ep_fifo_status, ++ .fifo_flush = pxa27x_ep_fifo_flush, ++}; ++ ++ ++/* --------------------------------------------------------------------------- ++ * device-scoped parts of the api to the usb controller hardware ++ * --------------------------------------------------------------------------- ++ */ ++ ++static int pxa27x_udc_get_frame(struct usb_gadget *_gadget) ++{ ++ return (UDCFNR & 0x3FF); ++} ++ ++static int pxa27x_udc_wakeup(struct usb_gadget *_gadget) ++{ ++ /* host may not have enabled remote wakeup */ ++ if ((UDCCR & UDCCR_DWRE) == 0) ++ return -EHOSTUNREACH; ++ udc_set_mask_UDCCR(UDCCR_UDR); ++ return 0; ++} ++ ++static const struct usb_gadget_ops pxa27x_udc_ops = { ++ .get_frame = pxa27x_udc_get_frame, ++ .wakeup = pxa27x_udc_wakeup, ++ // current versions must always be self-powered ++}; ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++#ifdef UDC_PROC_FILE ++ ++static const char proc_node_name [] = "driver/udc"; ++ ++static int ++udc_proc_read(char *page, char **start, off_t off, int count, ++ int *eof, void *_dev) ++{ ++ char *buf = page; ++ struct pxa27x_udc *dev = _dev; ++ char *next = buf; ++ unsigned size = count; ++ unsigned long flags; ++ int i, t; ++ u32 tmp; ++ ++ if (off != 0) ++ return 0; ++ ++ local_irq_save(flags); ++ ++ /* basic device status */ ++ t = scnprintf(next, size, DRIVER_DESC "\n" ++ "%s version: %s\nGadget driver: %s\n", ++ driver_name, DRIVER_VERSION SIZE_STR DMASTR, ++ dev->driver ? dev->driver->driver.name : "(none)"); ++ size -= t; ++ next += t; ++ ++ /* registers for device and ep0 */ ++ t = scnprintf(next, size, ++ "uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n", ++ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR); ++ size -= t; ++ next += t; ++ ++ tmp = UDCCR; ++ t = scnprintf(next, size,"udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", tmp, ++ (tmp & UDCCR_OEN) ? " oen":"", ++ (tmp & UDCCR_AALTHNP) ? " aalthnp":"", ++ (tmp & UDCCR_AHNP) ? " rem" : "", ++ (tmp & UDCCR_BHNP) ? " rstir" : "", ++ (tmp & UDCCR_DWRE) ? " dwre" : "", ++ (tmp & UDCCR_SMAC) ? " smac" : "", ++ (tmp & UDCCR_EMCE) ? " emce" : "", ++ (tmp & UDCCR_UDR) ? " udr" : "", ++ (tmp & UDCCR_UDA) ? " uda" : "", ++ (tmp & UDCCR_UDE) ? " ude" : "", ++ (tmp & UDCCR_ACN) >> UDCCR_ACN_S, ++ (tmp & UDCCR_AIN) >> UDCCR_AIN_S, ++ (tmp & UDCCR_AAISN)>> UDCCR_AAISN_S ); ++ ++ size -= t; ++ next += t; ++ ++ tmp = UDCCSR0; ++ t = scnprintf(next, size, ++ "udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp, ++ (tmp & UDCCSR0_SA) ? " sa" : "", ++ (tmp & UDCCSR0_RNE) ? " rne" : "", ++ (tmp & UDCCSR0_FST) ? " fst" : "", ++ (tmp & UDCCSR0_SST) ? " sst" : "", ++ (tmp & UDCCSR0_DME) ? " dme" : "", ++ (tmp & UDCCSR0_IPR) ? " ipr" : "", ++ (tmp & UDCCSR0_OPC) ? " opc" : ""); ++ size -= t; ++ next += t; ++ ++ if (!dev->driver) ++ goto done; ++ ++ t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", ++ dev->stats.write.bytes, dev->stats.write.ops, ++ dev->stats.read.bytes, dev->stats.read.ops, ++ dev->stats.irqs); ++ size -= t; ++ next += t; ++ ++ /* dump endpoint queues */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep [i]; ++ struct pxa27x_request *req; ++ int t; ++ ++ if (i != 0) { ++ const struct usb_endpoint_descriptor *d; ++ ++ d = ep->desc; ++ if (!d) ++ continue; ++ tmp = *dev->ep [i].reg_udccsr; ++ t = scnprintf(next, size, ++ "%s max %d %s udccs %02x udccr:0x%x\n", ++ ep->ep.name, le16_to_cpu (d->wMaxPacketSize), ++ (ep->dma >= 0) ? "dma" : "pio", tmp, ++ *dev->ep[i].reg_udccr); ++ /* TODO translate all five groups of udccs bits! */ ++ ++ } else /* ep0 should only have one transfer queued */ ++ t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n", ++ ep->pio_irqs); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ ++ if (list_empty(&ep->queue)) { ++ t = scnprintf(next, size, "\t(nothing queued)\n"); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ continue; ++ } ++ list_for_each_entry(req, &ep->queue, queue) { ++#ifdef USE_DMA ++ if (ep->dma >= 0 && req->queue.prev == &ep->queue) ++ t = scnprintf(next, size, ++ "\treq %p len %d/%d " ++ "buf %p (dma%d dcmd %08x)\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf, ++ ep->dma, DCMD(ep->dma) ++ // low 13 bits == bytes-to-go ++ ); ++ else ++#endif ++ t = scnprintf(next, size, ++ "\treq %p len %d/%d buf %p\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ } ++ } ++ ++done: ++ local_irq_restore(flags); ++ *eof = 1; ++ return count - size; ++} ++ ++#define create_proc_files() \ ++ create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) ++#define remove_proc_files() \ ++ remove_proc_entry(proc_node_name, NULL) ++ ++#else /* !UDC_PROC_FILE */ ++#define create_proc_files() do {} while (0) ++#define remove_proc_files() do {} while (0) ++ ++#endif /* UDC_PROC_FILE */ ++ ++/* "function" sysfs attribute */ ++static ssize_t ++show_function (struct device *_dev, struct device_attribute *attr, char *buf) ++{ ++ struct pxa27x_udc *dev = dev_get_drvdata (_dev); ++ ++ if (!dev->driver ++ || !dev->driver->function ++ || strlen (dev->driver->function) > PAGE_SIZE) ++ return 0; ++ return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); ++} ++static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * udc_disable - disable USB device controller ++ */ ++static void udc_disable(struct pxa27x_udc *dev) ++{ ++ UDCICR0 = UDCICR1 = 0x00000000; ++ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ ++ /* Disable clock for USB device */ ++ pxa_set_cken(CKEN11_USB, 0); ++ ++ ep0_idle (dev); ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ LED_CONNECTED_OFF; ++ if (dev->mach->udc_command) ++ dev->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); ++} ++ ++ ++/* ++ * udc_reinit - initialize software state ++ */ ++static void udc_reinit(struct pxa27x_udc *dev) ++{ ++ u32 i; ++ ++ dev->ep0state = EP0_IDLE; ++ ++ /* basic endpoint records init */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->stopped = 0; ++ ep->pio_irqs = ep->dma_irqs = 0; ++ } ++ dev->configuration = 0; ++ dev->interface = 0; ++ dev->alternate = 0; ++ /* the rest was statically initialized, and is read-only */ ++} ++ ++/* until it's enabled, this UDC should be completely invisible ++ * to any USB host. ++ */ ++static void udc_enable (struct pxa27x_udc *dev) ++{ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ ++ // MST_MSCWR2 &= ~(MST_MSCWR2_nUSBC_SC); ++ ++ /* Enable clock for USB device */ ++ pxa_set_cken(CKEN11_USB, 1); ++ ++ UDCICR0 = UDCICR1 = 0; ++ ++ ep0_idle(dev); ++ dev->gadget.speed = USB_SPEED_FULL; ++ dev->stats.irqs = 0; ++ ++ udc_set_mask_UDCCR(UDCCR_UDE); ++ udelay (2); ++ if (UDCCR & UDCCR_EMCE) ++ { ++ printk(KERN_ERR ": There are error in configuration, udc disabled\n"); ++ } ++ ++ /* caller must be able to sleep in order to cope ++ * with startup transients. ++ */ ++ msleep(100); ++ ++ /* enable suspend/resume and reset irqs */ ++ UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS; ++ ++ /* enable ep0 irqs */ ++ UDCICR0 = UDCICR_INT(0,UDCICR_INT_MASK); ++#if 0 ++ for(i=1; i < UDC_EP_NUM; i++) { ++ if (dev->ep[i].assigned) ++ pio_irq_enable(i); ++ } ++#endif ++ if (dev->mach->udc_command) ++ dev->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); ++} ++ ++ ++/* when a driver is successfully registered, it will receive ++ * control requests including set_configuration(), which enables ++ * non-control requests. then usb traffic follows until a ++ * disconnect is reported. then a host may connect again, or ++ * the driver might get unbound. ++ */ ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++{ ++ struct pxa27x_udc *dev = the_controller; ++ int retval; ++#if 0 ++ DMSG("dev=0x%x, driver=0x%x, speed=%d," ++ "bind=0x%x, unbind=0x%x, disconnect=0x%x, setup=0x%x\n", ++ (unsigned)dev, (unsigned)driver, driver->speed, ++ (unsigned)driver->bind, (unsigned)driver->unbind, ++ (unsigned)driver->disconnect, (unsigned)driver->setup); ++#endif ++ if (!driver || driver->speed != USB_SPEED_FULL ++ || !driver->bind ++ || !driver->unbind ++ || !driver->disconnect ++ || !driver->setup) ++ return -EINVAL; ++ if (!dev) ++ return -ENODEV; ++ if (dev->driver) ++ return -EBUSY; ++ ++ /* first hook up the driver ... */ ++ dev->driver = driver; ++ dev->gadget.dev.driver = &driver->driver; ++ ++ device_add (&dev->gadget.dev); ++ retval = driver->bind(&dev->gadget); ++ if (retval) { ++ DMSG("bind to driver %s --> error %d\n", ++ driver->driver.name, retval); ++ device_del (&dev->gadget.dev); ++ ++ dev->driver = 0; ++ dev->gadget.dev.driver = 0; ++ return retval; ++ } ++ device_create_file(dev->dev, &dev_attr_function); ++ ++ /* ... then enable host detection and ep0; and we're ready ++ * for set_configuration as well as eventual disconnect. ++ * NOTE: this shouldn't power up until later. ++ */ ++ DMSG("registered gadget driver '%s'\n", driver->driver.name); ++ udc_enable(dev); ++ dump_state(dev); ++ return 0; ++} ++EXPORT_SYMBOL(usb_gadget_register_driver); ++ ++static void ++stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver) ++{ ++ int i; ++ ++ DMSG("Trace path 1\n"); ++ /* don't disconnect drivers more than once */ ++ if (dev->gadget.speed == USB_SPEED_UNKNOWN) ++ driver = 0; ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->stopped = 1; ++ nuke(ep, -ESHUTDOWN); ++ } ++ del_timer_sync(&dev->timer); ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (driver) ++ driver->disconnect(&dev->gadget); ++ ++ /* re-init driver-visible data structures */ ++ udc_reinit(dev); ++} ++ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ struct pxa27x_udc *dev = the_controller; ++ ++ if (!dev) ++ return -ENODEV; ++ if (!driver || driver != dev->driver) ++ return -EINVAL; ++ ++ local_irq_disable(); ++ udc_disable(dev); ++ stop_activity(dev, driver); ++ local_irq_enable(); ++ ++ driver->unbind(&dev->gadget); ++ dev->driver = 0; ++ ++ device_del (&dev->gadget.dev); ++ device_remove_file(dev->dev, &dev_attr_function); ++ ++ DMSG("unregistered gadget driver '%s'\n", driver->driver.name); ++ dump_state(dev); ++ return 0; ++} ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++#ifndef enable_disconnect_irq ++#define enable_disconnect_irq() do {} while (0) ++#define disable_disconnect_irq() do {} while (0) ++#endif ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static inline void clear_ep_state (struct pxa27x_udc *dev) ++{ ++ unsigned i; ++ ++ /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint ++ * fifos, and pending transactions mustn't be continued in any case. ++ */ ++ for (i = 1; i < UDC_EP_NUM; i++) ++ nuke(&dev->ep[i], -ECONNABORTED); ++} ++ ++static void udc_watchdog(unsigned long _dev) ++{ ++ struct pxa27x_udc *dev = (void *)_dev; ++ ++ local_irq_disable(); ++ if (dev->ep0state == EP0_STALL ++ && (UDCCSR0 & UDCCSR0_FST) == 0 ++ && (UDCCSR0 & UDCCSR0_SST) == 0) { ++ UDCCSR0 = UDCCSR0_FST|UDCCSR0_FTF; ++ DBG(DBG_VERBOSE, "ep0 re-stall\n"); ++ start_watchdog(dev); ++ } ++ local_irq_enable(); ++} ++ ++static void handle_ep0 (struct pxa27x_udc *dev) ++{ ++ u32 udccsr0 = UDCCSR0; ++ struct pxa27x_ep *ep = &dev->ep [0]; ++ struct pxa27x_request *req; ++ union { ++ struct usb_ctrlrequest r; ++ u8 raw [8]; ++ u32 word [2]; ++ } u; ++ ++ if (list_empty(&ep->queue)) ++ req = 0; ++ else ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ ++ /* clear stall status */ ++ if (udccsr0 & UDCCSR0_SST) { ++ nuke(ep, -EPIPE); ++ UDCCSR0 = UDCCSR0_SST; ++ del_timer(&dev->timer); ++ ep0_idle(dev); ++ } ++ ++ /* previous request unfinished? non-error iff back-to-back ... */ ++ if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) { ++ nuke(ep, 0); ++ del_timer(&dev->timer); ++ ep0_idle(dev); ++ } ++ ++ switch (dev->ep0state) { ++ case EP0_NO_ACTION: ++ printk(KERN_INFO"%s: Busy\n", __FUNCTION__); ++ /*Fall through */ ++ case EP0_IDLE: ++ /* late-breaking status? */ ++ udccsr0 = UDCCSR0; ++ ++ /* start control request? */ ++ if (likely((udccsr0 & (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE)) ++ == (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))) { ++ int i; ++ ++ nuke (ep, -EPROTO); ++ /* read SETUP packet */ ++ for (i = 0; i < 2; i++) { ++ if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) { ++bad_setup: ++ DMSG("SETUP %d!\n", i); ++ goto stall; ++ } ++ u.word [i] = UDCDR0; ++ } ++ if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0)) ++ goto bad_setup; ++ ++ le16_to_cpus (&u.r.wValue); ++ le16_to_cpus (&u.r.wIndex); ++ le16_to_cpus (&u.r.wLength); ++ ++ LED_EP0_ON; ++ ++ DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ u.r.bRequestType, u.r.bRequest, ++ u.r.wValue, u.r.wIndex, u.r.wLength); ++ /* cope with automagic for some standard requests. */ ++ dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) ++ == USB_TYPE_STANDARD; ++ dev->req_config = 0; ++ dev->req_pending = 1; ++#if 0 ++ switch (u.r.bRequest) { ++ /* hardware was supposed to hide this */ ++ case USB_REQ_SET_CONFIGURATION: ++ case USB_REQ_SET_INTERFACE: ++ case USB_REQ_SET_ADDRESS: ++ printk(KERN_ERR "Should not come here\n"); ++ break; ++ } ++ ++#endif ++ if (u.r.bRequestType & USB_DIR_IN) ++ dev->ep0state = EP0_IN_DATA_PHASE; ++ else ++ dev->ep0state = EP0_OUT_DATA_PHASE; ++ i = dev->driver->setup(&dev->gadget, &u.r); ++ ++ if (i < 0) { ++ /* hardware automagic preventing STALL... */ ++ if (dev->req_config) { ++ /* hardware sometimes neglects to tell ++ * tell us about config change events, ++ * so later ones may fail... ++ */ ++ WARN("config change %02x fail %d?\n", ++ u.r.bRequest, i); ++ return; ++ /* TODO experiment: if has_cfr, ++ * hardware didn't ACK; maybe we ++ * could actually STALL! ++ */ ++ } ++ DBG(DBG_VERBOSE, "protocol STALL, " ++ "%02x err %d\n", UDCCSR0, i); ++stall: ++ /* the watchdog timer helps deal with cases ++ * where udc seems to clear FST wrongly, and ++ * then NAKs instead of STALLing. ++ */ ++ ep0start(dev, UDCCSR0_FST|UDCCSR0_FTF, "stall"); ++ start_watchdog(dev); ++ dev->ep0state = EP0_STALL; ++ LED_EP0_OFF; ++ ++ /* deferred i/o == no response yet */ ++ } else if (dev->req_pending) { ++ if (likely(dev->ep0state == EP0_IN_DATA_PHASE ++ || dev->req_std || u.r.wLength)) ++ ep0start(dev, 0, "defer"); ++ else ++ ep0start(dev, UDCCSR0_IPR, "defer/IPR"); ++ } ++ ++ /* expect at least one data or status stage irq */ ++ return; ++ ++ } else { ++ /* some random early IRQ: ++ * - we acked FST ++ * - IPR cleared ++ * - OPC got set, without SA (likely status stage) ++ */ ++ UDCCSR0 = udccsr0 & (UDCCSR0_SA|UDCCSR0_OPC); ++ } ++ break; ++ case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ ++ if (udccsr0 & UDCCSR0_OPC) { ++ UDCCSR0 = UDCCSR0_OPC|UDCCSR0_FTF; ++ DBG(DBG_VERBOSE, "ep0in premature status\n"); ++ if (req) ++ done(ep, req, 0); ++ ep0_idle(dev); ++ } else /* irq was IPR clearing */ { ++ if (req) { ++ /* this IN packet might finish the request */ ++ (void) write_ep0_fifo(ep, req); ++ } /* else IN token before response was written */ ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ ++ if (udccsr0 & UDCCSR0_OPC) { ++ if (req) { ++ /* this OUT packet might finish the request */ ++ if (read_ep0_fifo(ep, req)) ++ done(ep, req, 0); ++ /* else more OUT packets expected */ ++ } /* else OUT token before read was issued */ ++ } else /* irq was IPR clearing */ { ++ DBG(DBG_VERBOSE, "ep0out premature status\n"); ++ if (req) ++ done(ep, req, 0); ++ ep0_idle(dev); ++ } ++ break; ++ case EP0_STALL: ++ UDCCSR0 = UDCCSR0_FST; ++ break; ++ } ++ UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK); ++} ++ ++ ++static void handle_ep(struct pxa27x_ep *ep) ++{ ++ struct pxa27x_request *req; ++ int completed; ++ u32 udccsr=0; ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ do { ++ completed = 0; ++ if (likely (!list_empty(&ep->queue))) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, queue); ++ } else ++ req = 0; ++ ++// udccsr = *ep->reg_udccsr; ++ DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__, ++ req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr); ++ if (unlikely(ep->dir_in)) { ++ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr; ++ if (unlikely (udccsr)) ++ *ep->reg_udccsr = udccsr; ++ ++ if (req && likely ((*ep->reg_udccsr & UDCCSR_FS) != 0)) ++ completed = write_fifo(ep, req); ++ ++ } else { ++ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr; ++ if (unlikely(udccsr)) ++ *ep->reg_udccsr = udccsr; ++ ++ /* fifos can hold packets, ready for reading... */ ++ if (likely(req)) { ++ completed = read_fifo(ep, req); ++ } else { ++ pio_irq_disable (ep->ep_num); ++ *ep->reg_udccsr = UDCCSR_FEF; ++ DMSG("%s: no req for out data\n", ++ __FUNCTION__); ++ } ++ } ++ ep->pio_irqs++; ++ } while (completed); ++} ++ ++static void pxa27x_change_configuration (struct pxa27x_udc *dev) ++{ ++ struct usb_ctrlrequest req ; ++ ++ req.bRequestType = 0; ++ req.bRequest = USB_REQ_SET_CONFIGURATION; ++ req.wValue = dev->configuration; ++ req.wIndex = 0; ++ req.wLength = 0; ++ ++ dev->ep0state = EP0_NO_ACTION; ++ dev->driver->setup(&dev->gadget, &req); ++ ++} ++ ++static void pxa27x_change_interface (struct pxa27x_udc *dev) ++{ ++ struct usb_ctrlrequest req; ++ ++ req.bRequestType = USB_RECIP_INTERFACE; ++ req.bRequest = USB_REQ_SET_INTERFACE; ++ req.wValue = dev->alternate; ++ req.wIndex = dev->interface; ++ req.wLength = 0; ++ ++ dev->ep0state = EP0_NO_ACTION; ++ dev->driver->setup(&dev->gadget, &req); ++} ++ ++/* ++ * pxa27x_udc_irq - interrupt handler ++ * ++ * avoid delays in ep0 processing. the control handshaking isn't always ++ * under software control (pxa250c0 and the pxa255 are better), and delays ++ * could cause usb protocol errors. ++ */ ++static irqreturn_t ++pxa27x_udc_irq(int irq, void *_dev) ++{ ++ struct pxa27x_udc *dev = _dev; ++ int handled; ++ ++ dev->stats.irqs++; ++ HEX_DISPLAY(dev->stats.irqs); ++ ++// printk("\n"); ++ DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, " ++ "UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR); ++ do { ++ u32 udcir = UDCISR1 & 0xF8000000; ++ ++ handled = 0; ++ ++ /* SUSpend Interrupt Request */ ++ if (unlikely(udcir & UDCISR1_IRSU)) { ++ UDCISR1 = UDCISR1_IRSU; ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB suspend\n"); ++ if (dev->gadget.speed != USB_SPEED_UNKNOWN ++ && dev->driver ++ && dev->driver->suspend) ++ dev->driver->suspend(&dev->gadget); ++ ep0_idle (dev); ++ } ++ ++ /* RESume Interrupt Request */ ++ if (unlikely(udcir & UDCISR1_IRRU)) { ++ UDCISR1 = UDCISR1_IRRU; ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB resume\n"); ++ ++ if (dev->gadget.speed != USB_SPEED_UNKNOWN ++ && dev->driver ++ && dev->driver->resume) ++ dev->driver->resume(&dev->gadget); ++ } ++ ++ if (unlikely(udcir & UDCISR1_IRCC)) { ++ unsigned config, interface, alternate; ++ ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or " ++ "SET_INTERFACE command received\n"); ++ ++ UDCCR |= UDCCR_SMAC; ++ ++ config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S; ++ ++ if (dev->configuration != config) { ++ dev->configuration = config; ++ pxa27x_change_configuration(dev) ; ++ } ++ ++ interface = (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S; ++ alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S; ++ ++ if ( (dev->configuration != interface) || \ ++ (dev->alternate != alternate)){ ++ dev->interface = config; ++ dev->alternate = alternate; ++ pxa27x_change_interface(dev); ++ } ++ ++ UDCISR1 = UDCISR1_IRCC; ++ DMSG("%s: con:%d,inter:%d,alt:%d\n", ++ __FUNCTION__, config,interface, alternate); ++ } ++ ++ /* ReSeT Interrupt Request - USB reset */ ++ if (unlikely(udcir & UDCISR1_IRRS)) { ++ UDCISR1 = UDCISR1_IRRS; ++ handled = 1; ++ ++ if ((UDCCR & UDCCR_UDA) == 0) { ++ DBG(DBG_VERBOSE, "USB reset start\n"); ++ ++ /* reset driver and endpoints, ++ * in case that's not yet done ++ */ ++ stop_activity (dev, dev->driver); ++ ++ } ++ INFO("USB reset\n"); ++ dev->gadget.speed = USB_SPEED_FULL; ++ memset(&dev->stats, 0, sizeof dev->stats); ++ ++ } else { ++ u32 udcisr0 = UDCISR0 ; ++ u32 udcisr1 = UDCISR1 & 0xFFFF; ++ int i; ++ ++ if (unlikely (!udcisr0 && !udcisr1)) ++ continue; ++ ++ DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1,udcisr0); ++ ++ /* control traffic */ ++ if (udcisr0 & UDCISR0_IR0) { ++ dev->ep[0].pio_irqs++; ++ handle_ep0(dev); ++ handled = 1; ++ } ++ ++ udcisr0 >>= 2; ++ /* endpoint data transfers */ ++ for (i = 1; udcisr0!=0 && i < 16; udcisr0>>=2,i++) { ++ UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK); ++ ++ if (udcisr0 & UDC_INT_FIFOERROR) ++ printk(KERN_ERR" Endpoint %d Fifo error\n", i); ++ if (udcisr0 & UDC_INT_PACKETCMP) { ++ handle_ep(&dev->ep[i]); ++ handled = 1; ++ } ++ ++ } ++ ++ for (i = 0; udcisr1!=0 && i < 8; udcisr1 >>= 2, i++) { ++ UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK); ++ ++ if (udcisr1 & UDC_INT_FIFOERROR) { ++ printk(KERN_ERR" Endpoint %d fifo error\n", (i+16)); ++ } ++ ++ if (udcisr1 & UDC_INT_PACKETCMP) { ++ handle_ep(&dev->ep[i+16]); ++ handled = 1; ++ } ++ } ++ } ++ ++ /* we could also ask for 1 msec SOF (SIR) interrupts */ ++ ++ } while (handled); ++ return IRQ_HANDLED; ++} ++ ++static inline void validate_fifo_size(struct pxa27x_ep *pxa_ep, u8 bmAttributes) ++{ ++ switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { ++ case USB_ENDPOINT_XFER_CONTROL: ++ pxa_ep->fifo_size = EP0_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_ISOC: ++ pxa_ep->fifo_size = ISO_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_BULK: ++ pxa_ep->fifo_size = BULK_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_INT: ++ pxa_ep->fifo_size = INT_FIFO_SIZE; ++ break; ++ default: ++ break; ++ } ++} ++ ++static void udc_init_ep(struct pxa27x_udc *dev) ++{ ++ int i; ++ ++ INIT_LIST_HEAD (&dev->gadget.ep_list); ++ INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); ++ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->dma = -1; ++ if (i != 0) { ++ memset(ep, 0, sizeof(*ep)); ++ } ++ INIT_LIST_HEAD (&ep->queue); ++ } ++} ++#define NAME_SIZE 18 ++ ++struct usb_ep* pxa27x_ep_config( ++ struct usb_gadget *gadget, ++ struct usb_endpoint_descriptor *desc, ++ int config, int interface, int alt ++) ++{ ++ u32 tmp ; ++ unsigned i; ++ char* name; ++ struct usb_ep * ep = NULL; ++ struct pxa27x_ep *pxa_ep = NULL; ++ struct pxa27x_udc *dev = the_controller; ++ ++ DMSG("pxa27x_config_ep is called\n"); ++ DMSG(" usb endpoint descriptor is:\n" ++ " bLength:%d\n" ++ " bDescriptorType:%x\n" ++ " bEndpointAddress:%x\n" ++ " bmAttributes:%x\n" ++ " wMaxPacketSize:%d\n", ++ desc->bLength, ++ desc->bDescriptorType,desc->bEndpointAddress, ++ desc->bmAttributes,desc->wMaxPacketSize); ++ ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if(!dev->ep[i].assigned) { ++ pxa_ep = &dev->ep[i]; ++ pxa_ep->assigned = 1; ++ pxa_ep->ep_num = i; ++ break; ++ } ++ } ++ if (unlikely(i == UDC_EP_NUM)) { ++ printk(KERN_ERR __FILE__ ": Failed to find a spare endpoint\n"); ++ return ep; ++ } ++ ++ ++ ep = &pxa_ep->ep; ++ ++ pxa_ep->dev = dev; ++ pxa_ep->desc = desc; ++ pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0; ++ pxa_ep->dma = -1; ++ ++ if (!(desc->bEndpointAddress & 0xF)) ++ desc->bEndpointAddress |= i; ++ ++ if (!(desc->wMaxPacketSize)) { ++ validate_fifo_size(pxa_ep, desc->bmAttributes); ++ desc->wMaxPacketSize = pxa_ep->fifo_size; ++ } else ++ pxa_ep->fifo_size = desc->wMaxPacketSize; ++ ++ pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; ++ pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; ++ pxa_ep->stopped = 1; ++ pxa_ep->dma_con = 0; ++ pxa_ep->config = config; ++ pxa_ep->interface = interface; ++ pxa_ep->aisn = alt; ++ ++ pxa_ep->reg_udccsr = &UDCCSR0 + i; ++ pxa_ep->reg_udcbcr = &UDCBCR0 + i; ++ pxa_ep->reg_udcdr = &UDCDR0 + i ; ++ pxa_ep->reg_udccr = &UDCCRA - 1 + i; ++#ifdef USE_DMA ++ pxa_ep->reg_drcmr = &DRCMR24 + i; ++#endif ++ ++#if 0 ++ DMSG("udccsr=0x%8x, udcbcr=0x%8x, udcdr=0x%8x," ++ "udccr0=0x%8x\n", ++ (unsigned)pxa_ep->reg_udccsr, ++ (unsigned)pxa_ep->reg_udcbcr, ++ (unsigned)pxa_ep->reg_udcdr, ++ (unsigned)pxa_ep->reg_udccr); ++#endif ++ /* Configure UDCCR */ ++ tmp = 0; ++ tmp |= (pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN; ++ tmp |= (pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN; ++ tmp |= (pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN; ++ tmp |= (desc->bEndpointAddress << UDCCONR_EN_S) & UDCCONR_EN; ++ tmp |= (pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET; ++ tmp |= (pxa_ep->dir_in) ? UDCCONR_ED : 0; ++ tmp |= (min(pxa_ep->fifo_size, (unsigned)desc->wMaxPacketSize) \ ++ << UDCCONR_MPS_S ) & UDCCONR_MPS; ++ tmp |= UDCCONR_DE | UDCCONR_EE; ++// tmp |= UDCCONR_EE; ++ ++ *pxa_ep->reg_udccr = tmp; ++ ++#ifdef USE_DMA ++ /* Only BULK use DMA */ ++ if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK)\ ++ == USB_ENDPOINT_XFER_BULK) ++ *pxa_ep->reg_udccsr = UDCCSR_DME; ++#endif ++ ++ DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr,*pxa_ep->reg_udccr); ++ ++ /* Fill ep name*/ ++ name = kmalloc(NAME_SIZE, GFP_KERNEL); ++ if (!name) { ++ printk(KERN_ERR "%s: Error\n", __FUNCTION__); ++ return NULL; ++ } ++ ++ switch (pxa_ep->ep_type) { ++ case USB_ENDPOINT_XFER_BULK: ++ sprintf(name, "Bulk-%s-%d", (pxa_ep->dir_in ? "in":"out"), i); ++ break; ++ case USB_ENDPOINT_XFER_INT: ++ sprintf(name, "Interrupt-%s-%d", (pxa_ep->dir_in ? \ ++ "in":"out"), i); ++ break; ++ default: ++ sprintf(name, "endpoint-%s-%d", (pxa_ep->dir_in ? \ ++ "in":"out"), i); ++ break; ++ } ++ ep->name = name; ++ ++ ep->ops = &pxa27x_ep_ops; ++ ep->maxpacket = min((ushort)pxa_ep->fifo_size, desc->wMaxPacketSize); ++ ++ list_add_tail (&ep->ep_list, &gadget->ep_list); ++ return ep; ++} ++ ++EXPORT_SYMBOL(pxa27x_ep_config); ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void nop_release (struct device *dev) ++{ ++ DMSG("%s %s\n", __FUNCTION__, dev->bus_id); ++} ++ ++/* this uses load-time allocation and initialization (instead of ++ * doing it at run-time) to save code, eliminate fault paths, and ++ * be more obviously correct. ++ */ ++static struct pxa27x_udc memory = { ++ .gadget = { ++ .ops = &pxa27x_udc_ops, ++ .ep0 = &memory.ep[0].ep, ++ .name = driver_name, ++ .dev = { ++ .bus_id = "gadget", ++ .release = nop_release, ++ }, ++ }, ++ ++ /* control endpoint */ ++ .ep[0] = { ++ .ep = { ++ .name = ep0name, ++ .ops = &pxa27x_ep_ops, ++ .maxpacket = EP0_FIFO_SIZE, ++ }, ++ .dev = &memory, ++ .reg_udccsr = &UDCCSR0, ++ .reg_udcdr = &UDCDR0, ++ } ++}; ++ ++#define CP15R0_VENDOR_MASK 0xffffe000 ++ ++#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/xscale */ ++ ++/* ++ * probe - binds to the platform device ++ */ ++static int __init pxa27x_udc_probe(struct platform_device *_dev) ++{ ++ struct pxa27x_udc *dev = &memory; ++ int retval; ++ u32 chiprev; ++ ++ /* insist on Intel/ARM/XScale */ ++ asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev)); ++ if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { ++ printk(KERN_ERR "%s: not XScale!\n", driver_name); ++ return -ENODEV; ++ } ++ /* other non-static parts of init */ ++ dev->dev = &_dev->dev; ++ dev->mach = _dev->dev.platform_data; ++ ++ init_timer(&dev->timer); ++ dev->timer.function = udc_watchdog; ++ dev->timer.data = (unsigned long) dev; ++ ++ device_initialize(&dev->gadget.dev); ++ dev->gadget.dev.parent = &_dev->dev; ++ dev->gadget.dev.dma_mask = _dev->dev.dma_mask; ++ ++ the_controller = dev; ++ platform_set_drvdata(_dev, dev); ++ ++ udc_disable(dev); ++ udc_init_ep(dev); ++ udc_reinit(dev); ++ ++ /* irq setup after old hardware state is cleaned up */ ++ retval = request_irq(IRQ_USB, pxa27x_udc_irq, ++ SA_INTERRUPT, driver_name, dev); ++ if (retval != 0) { ++ printk(KERN_ERR "%s: can't get irq %i, err %d\n", ++ driver_name, IRQ_USB, retval); ++ return -EBUSY; ++ } ++ dev->got_irq = 1; ++ ++ create_proc_files(); ++ ++ return 0; ++} ++ ++static int __exit pxa27x_udc_remove(struct platform_device *_dev) ++{ ++ struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev); ++ ++ udc_disable(dev); ++ remove_proc_files(); ++ usb_gadget_unregister_driver(dev->driver); ++ ++ if (dev->got_irq) { ++ free_irq(IRQ_USB, dev); ++ dev->got_irq = 0; ++ } ++ if (machine_is_lubbock() && dev->got_disc) { ++ free_irq(LUBBOCK_USB_DISC_IRQ, dev); ++ dev->got_disc = 0; ++ } ++ platform_set_drvdata(_dev, 0); ++ the_controller = 0; ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static void pxa27x_udc_shutdown(struct platform_device *_dev) ++{ ++ struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev); ++ ++ udc_disable(dev); ++} ++ ++static int pxa27x_udc_suspend(struct platform_device *_dev, pm_message_t state) ++{ ++ int i; ++ struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev); ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ dev->udccsr0 = UDCCSR0; ++ for(i=1; (i<UDC_EP_NUM); i++) { ++ if (dev->ep[i].assigned) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->udccsr_value = *ep->reg_udccsr; ++ ep->udccr_value = *ep->reg_udccr; ++ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n", ++ i, *ep->reg_udccsr, *ep->reg_udccr); ++ } ++ } ++ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ pxa_set_cken(CKEN11_USB, 0); ++ // MST_MSCWR2 |= MST_MSCWR2_nUSBC_SC; ++ ++ return 0; ++} ++ ++static int pxa27x_udc_resume(struct platform_device *_dev) ++{ ++ int i; ++ struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev); ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ ++ UDCCSR0 = dev->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME); ++ for (i=1; i < UDC_EP_NUM; i++) { ++ if (dev->ep[i].assigned) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ *ep->reg_udccsr = ep->udccsr_value; ++ *ep->reg_udccr = ep->udccr_value; ++ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n", ++ i, *ep->reg_udccsr, *ep->reg_udccr); ++ } ++ } ++ udc_enable(dev); ++ /* OTGPH bit is set when sleep mode is entered. ++ * it indicates that OTG pad is retaining its state. ++ * Upon exit from sleep mode and before clearing OTGPH, ++ * Software must configure the USB OTG pad, UDC, and UHC ++ * to the state they were in before entering sleep mode.*/ ++ PSSR |= PSSR_OTGPH; ++ return 0; ++} ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct platform_driver udc_driver = { ++ .driver = { ++ .name = "pxa2xx-udc", ++ }, ++ .probe = pxa27x_udc_probe, ++ .remove = __exit_p(pxa27x_udc_remove), ++ ++#ifdef CONFIG_PM ++ // FIXME power management support ++ .shutdown = pxa27x_udc_shutdown, ++ .suspend = pxa27x_udc_suspend, ++ .resume = pxa27x_udc_resume ++#endif ++}; ++ ++static int __init udc_init(void) ++{ ++ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); ++ return platform_driver_register(&udc_driver); ++} ++module_init(udc_init); ++ ++static void __exit udc_exit(void) ++{ ++ platform_driver_unregister(&udc_driver); ++} ++module_exit(udc_exit); ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.21gum/drivers/usb/gadget/pxa27x_udc.h +=================================================================== +--- /dev/null ++++ linux-2.6.21gum/drivers/usb/gadget/pxa27x_udc.h +@@ -0,0 +1,332 @@ ++/* ++ * linux/drivers/usb/gadget/pxa27x_udc.h ++ * Intel PXA27x on-chip full speed USB device controller ++ * ++ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix ++ * Copyright (C) 2003 David Brownell ++ * Copyright (C) 2004 Intel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __LINUX_USB_GADGET_PXA27X_H ++#define __LINUX_USB_GADGET_PXA27X_H ++ ++#include <linux/types.h> ++ ++struct pxa27x_udc; ++ ++struct pxa27x_ep { ++ struct usb_ep ep; ++ struct pxa27x_udc *dev; ++ ++ const struct usb_endpoint_descriptor *desc; ++ struct list_head queue; ++ unsigned long pio_irqs; ++ unsigned long dma_irqs; ++ ++ int dma; ++ unsigned fifo_size; ++ unsigned ep_num; ++ unsigned ep_type; ++ ++ unsigned stopped : 1; ++ unsigned dma_con : 1; ++ unsigned dir_in : 1; ++ unsigned assigned : 1; ++ ++ unsigned config; ++ unsigned interface; ++ unsigned aisn; ++ /* UDCCSR = UDC Control/Status Register for this EP ++ * UBCR = UDC Byte Count Remaining (contents of OUT fifo) ++ * UDCDR = UDC Endpoint Data Register (the fifo) ++ * UDCCR = UDC Endpoint Configuration Registers ++ * DRCM = DMA Request Channel Map ++ */ ++ volatile u32 *reg_udccsr; ++ volatile u32 *reg_udcbcr; ++ volatile u32 *reg_udcdr; ++ volatile u32 *reg_udccr; ++#ifdef USE_DMA ++ volatile u32 *reg_drcmr; ++#define drcmr(n) .reg_drcmr = & DRCMR ## n , ++#else ++#define drcmr(n) ++#endif ++ ++#ifdef CONFIG_PM ++ unsigned udccsr_value; ++ unsigned udccr_value; ++#endif ++}; ++ ++struct pxa27x_request { ++ struct usb_request req; ++ struct list_head queue; ++}; ++ ++enum ep0_state { ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++// EP0_END_XFER, ++ EP0_STALL, ++ EP0_NO_ACTION ++}; ++ ++#define EP0_FIFO_SIZE ((unsigned)16) ++#define BULK_FIFO_SIZE ((unsigned)64) ++#define ISO_FIFO_SIZE ((unsigned)256) ++#define INT_FIFO_SIZE ((unsigned)8) ++ ++struct udc_stats { ++ struct ep0stats { ++ unsigned long ops; ++ unsigned long bytes; ++ } read, write; ++ unsigned long irqs; ++}; ++ ++#ifdef CONFIG_USB_PXA27X_SMALL ++/* when memory's tight, SMALL config saves code+data. */ ++//#undef USE_DMA ++//#define UDC_EP_NUM 3 ++#endif ++ ++#ifndef UDC_EP_NUM ++#define UDC_EP_NUM 24 ++#endif ++ ++struct pxa27x_udc { ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ enum ep0_state ep0state; ++ struct udc_stats stats; ++ unsigned got_irq : 1, ++ got_disc : 1, ++ has_cfr : 1, ++ req_pending : 1, ++ req_std : 1, ++ req_config : 1; ++ ++#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) ++ struct timer_list timer; ++ ++ struct device *dev; ++ struct pxa2xx_udc_mach_info *mach; ++ u64 dma_mask; ++ struct pxa27x_ep ep [UDC_EP_NUM]; ++ ++ unsigned configuration, ++ interface, ++ alternate; ++#ifdef CONFIG_PM ++ unsigned udccsr0; ++#endif ++}; ++ ++/*-------------------------------------------------------------------------*/ ++#if 0 ++#ifdef DEBUG ++#define HEX_DISPLAY(n) do { \ ++ if (machine_is_mainstone())\ ++ { MST_LEDDAT1 = (n); } \ ++ } while(0) ++ ++#define HEX_DISPLAY1(n) HEX_DISPLAY(n) ++ ++#define HEX_DISPLAY2(n) do { \ ++ if (machine_is_mainstone()) \ ++ { MST_LEDDAT2 = (n); } \ ++ } while(0) ++ ++#endif /* DEBUG */ ++#endif ++/*-------------------------------------------------------------------------*/ ++ ++/* LEDs are only for debug */ ++#ifndef HEX_DISPLAY ++#define HEX_DISPLAY(n) do {} while(0) ++#endif ++ ++#ifndef LED_CONNECTED_ON ++#define LED_CONNECTED_ON do {} while(0) ++#define LED_CONNECTED_OFF do {} while(0) ++#endif ++#ifndef LED_EP0_ON ++#define LED_EP0_ON do {} while (0) ++#define LED_EP0_OFF do {} while (0) ++#endif ++ ++static struct pxa27x_udc *the_controller; ++ ++#if 0 ++/*-------------------------------------------------------------------------*/ ++ ++ ++/* one GPIO should be used to detect host disconnect */ ++static inline int is_usb_connected(void) ++{ ++ if (!the_controller->mach->udc_is_connected) ++ return 1; ++ return the_controller->mach->udc_is_connected(); ++} ++ ++/* one GPIO should force the host to see this device (or not) */ ++static inline void make_usb_disappear(void) ++{ ++ if (!the_controller->mach->udc_command) ++ return; ++ the_controller->mach->udc_command(PXA27X_UDC_CMD_DISCONNECT); ++} ++ ++static inline void let_usb_appear(void) ++{ ++ if (!the_controller->mach->udc_command) ++ return; ++ the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); ++} ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * Debugging support vanishes in non-debug builds. DBG_NORMAL should be ++ * mostly silent during normal use/testing, with no timing side-effects. ++ */ ++#define DBG_NORMAL 1 /* error paths, device state transitions */ ++#define DBG_VERBOSE 2 /* add some success path trace info */ ++#define DBG_NOISY 3 /* ... even more: request level */ ++#define DBG_VERY_NOISY 4 /* ... even more: packet level */ ++ ++#ifdef DEBUG ++ ++static const char *state_name[] = { ++ "EP0_IDLE", ++ "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", ++ "EP0_END_XFER", "EP0_STALL" ++}; ++ ++#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff) ++ ++#ifdef VERBOSE ++# define UDC_DEBUG DBG_VERBOSE ++#else ++# define UDC_DEBUG DBG_NORMAL ++#endif ++ ++static void __attribute__ ((__unused__)) ++dump_udccr(const char *label) ++{ ++ u32 udccr = UDCCR; ++ DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", ++ label, udccr, ++ (udccr & UDCCR_OEN) ? " oen":"", ++ (udccr & UDCCR_AALTHNP) ? " aalthnp":"", ++ (udccr & UDCCR_AHNP) ? " rem" : "", ++ (udccr & UDCCR_BHNP) ? " rstir" : "", ++ (udccr & UDCCR_DWRE) ? " dwre" : "", ++ (udccr & UDCCR_SMAC) ? " smac" : "", ++ (udccr & UDCCR_EMCE) ? " emce" : "", ++ (udccr & UDCCR_UDR) ? " udr" : "", ++ (udccr & UDCCR_UDA) ? " uda" : "", ++ (udccr & UDCCR_UDE) ? " ude" : "", ++ (udccr & UDCCR_ACN) >> UDCCR_ACN_S, ++ (udccr & UDCCR_AIN) >> UDCCR_AIN_S, ++ (udccr & UDCCR_AAISN)>> UDCCR_AAISN_S ); ++} ++ ++static void __attribute__ ((__unused__)) ++dump_udccsr0(const char *label) ++{ ++ u32 udccsr0 = UDCCSR0; ++ ++ DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n", ++ label, state_name[the_controller->ep0state], udccsr0, ++ (udccsr0 & UDCCSR0_SA) ? " sa" : "", ++ (udccsr0 & UDCCSR0_RNE) ? " rne" : "", ++ (udccsr0 & UDCCSR0_FST) ? " fst" : "", ++ (udccsr0 & UDCCSR0_SST) ? " sst" : "", ++ (udccsr0 & UDCCSR0_DME) ? " dme" : "", ++ (udccsr0 & UDCCSR0_IPR) ? " ipr" : "", ++ (udccsr0 & UDCCSR0_OPC) ? " opr" : ""); ++} ++ ++static void __attribute__ ((__unused__)) ++dump_state(struct pxa27x_udc *dev) ++{ ++ unsigned i; ++ ++ DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n", ++ state_name[dev->ep0state], ++ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR); ++ dump_udccr("udccr"); ++ ++ if (!dev->driver) { ++ DMSG("no gadget driver bound\n"); ++ return; ++ } else ++ DMSG("ep0 driver '%s'\n", dev->driver->driver.name); ++ ++ ++ dump_udccsr0 ("udccsr0"); ++ DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", ++ dev->stats.write.bytes, dev->stats.write.ops, ++ dev->stats.read.bytes, dev->stats.read.ops); ++ ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if (dev->ep [i].desc == 0) ++ continue; ++ DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr); ++ } ++} ++ ++#if 0 ++static void dump_regs(u8 ep) ++{ ++ DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n", ++ ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep)); ++} ++static void dump_req (struct pxa27x_request *req) ++{ ++ struct usb_request *r = &req->req; ++ ++ DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n", ++ __FUNCTION__, (unsigned)r->buf, r->length, ++ r->dma, r->actual); ++} ++#endif ++ ++#else ++ ++#define DMSG(stuff...) do{}while(0) ++ ++#define dump_udccr(x) do{}while(0) ++#define dump_udccsr0(x) do{}while(0) ++#define dump_state(x) do{}while(0) ++ ++#define UDC_DEBUG ((unsigned)0) ++ ++#endif ++ ++#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) ++ ++#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) ++#define INFO(stuff...) printk(KERN_INFO "udc: " stuff) ++ ++ ++#endif /* __LINUX_USB_GADGET_PXA27X_H */ |