diff options
Diffstat (limited to 'recipes/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch')
| -rw-r--r-- | recipes/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/recipes/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch b/recipes/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch new file mode 100644 index 0000000000..df6d5f66c2 --- /dev/null +++ b/recipes/kexecboot/linux-kexecboot-2.6.24/spitz_h_rewrite.patch @@ -0,0 +1,497 @@ +http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html + +Here is a rewrite of spitz.h, which includes comments documenting +function of particular GPIO pins. + +spitz_h_rewrite.patch provides: +- no changes in compiled code +- partial spitz.h rewrite: + * organized by function + * describes complete GPIO pinout + * comments added + * removed defines cloning pxa-regs.h +- prefer generic pxa-regs.h GPIO if available +- use GPIO names instead of numbers + +Thanks to Trisoft for providing needed information. + +Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c +=================================================================== +--- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c 2008-02-13 13:49:22.000000000 +0000 +@@ -110,9 +110,9 @@ + pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); + + PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); +- PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); +- PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; +- PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); ++ PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST); ++ PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC; ++ PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST); + PKSR = 0xffffffff; // clear + + /* nRESET_OUT Disable */ +@@ -128,7 +128,7 @@ + static void spitz_postsuspend(void) + { + pxa_gpio_mode(GPIO18_RDY_MD); +- pxa_gpio_mode(10 | GPIO_IN); ++ pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN); + } + + static int spitz_should_wakeup(unsigned int resume_on_alarm) +Index: linux-2.6.24/drivers/video/pxafb.c +=================================================================== +--- linux-2.6.24.orig/drivers/video/pxafb.c 2008-02-13 13:49:04.000000000 +0000 ++++ linux-2.6.24/drivers/video/pxafb.c 2008-02-13 13:49:57.000000000 +0000 +@@ -920,7 +920,7 @@ + return; + } + +- for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) { ++ for (gpio = GPIO58_LDD_0; ldd_bits > 0; gpio++, ldd_bits--) { + pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT); + } + pxa_gpio_mode(GPIO74_LCD_FCLK_MD); +Index: linux-2.6.24/include/asm-arm/arch-pxa/akita.h +=================================================================== +--- linux-2.6.24.orig/include/asm-arm/arch-pxa/akita.h 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/arch-pxa/akita.h 2008-02-13 13:49:22.000000000 +0000 +@@ -12,11 +12,11 @@ + /* Akita IO Expander GPIOs */ + + #define AKITA_IOEXP_RESERVED_7 (1 << 7) +-#define AKITA_IOEXP_IR_ON (1 << 6) +-#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) +-#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) +-#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) +-#define AKITA_IOEXP_MIC_BIAS (1 << 2) ++#define AKITA_IOEXP_IR_ON (1 << 6) /* IrDA On */ ++#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) /* Pull-Up for Remote */ ++#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) /* Backlight Control */ ++#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) /* Backlight On */ ++#define AKITA_IOEXP_MIC_BIAS (1 << 2) /* Mic Bias On */ + #define AKITA_IOEXP_RESERVED_1 (1 << 1) + #define AKITA_IOEXP_RESERVED_0 (1 << 0) + +Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h +=================================================================== +--- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-13 13:49:07.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-13 13:49:22.000000000 +0000 +@@ -1334,6 +1334,7 @@ + #define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ + #define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ + #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ ++#define GPIO104_pSKTSEL 104 /* PCMCIA Socket Select (PXA27x) */ + #define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ + #define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ + #define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +Index: linux-2.6.24/include/asm-arm/arch-pxa/spitz.h +=================================================================== +--- linux-2.6.24.orig/include/asm-arm/arch-pxa/spitz.h 2008-02-13 13:49:01.000000000 +0000 ++++ linux-2.6.24/include/asm-arm/arch-pxa/spitz.h 2008-02-13 13:49:22.000000000 +0000 +@@ -1,8 +1,9 @@ + /* +- * Hardware specific definitions for SL-Cx000 series of PDAs ++ * Hardware specific definitions for SL-Cxx00 series of PDAs + * + * Copyright (c) 2005 Alexander Wykes + * Copyright (c) 2005 Richard Purdie ++ * Copyright (c) 2008 Stanislav Brabec + * + * Based on Sharp's 2.4 kernel patches + * +@@ -13,140 +14,257 @@ + */ + #ifndef __ASM_ARCH_SPITZ_H + #define __ASM_ARCH_SPITZ_H 1 +-#endif + +-#include <linux/fb.h> ++#include <asm-arm/arch-pxa/irqs.h> ++#include <linux/platform_device.h> + + /* Spitz/Akita GPIOs */ + +-#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ +-#define SPITZ_GPIO_RESET (1) +-#define SPITZ_GPIO_nSD_DETECT (9) +-#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ +-#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ +-#define SPITZ_GPIO_ADS7846_CS (14) +-#define SPITZ_GPIO_SYNC (16) +-#define SPITZ_GPIO_MAX1111_CS (20) +-#define SPITZ_GPIO_FATAL_BAT (21) +-#define SPITZ_GPIO_HSYNC (22) +-#define SPITZ_GPIO_nSD_CLK (32) +-#define SPITZ_GPIO_USB_DEVICE (35) +-#define SPITZ_GPIO_USB_HOST (37) +-#define SPITZ_GPIO_USB_CONNECT (41) +-#define SPITZ_GPIO_LCDCON_CS (53) +-#define SPITZ_GPIO_nPCE (54) +-#define SPITZ_GPIO_nSD_WP (81) +-#define SPITZ_GPIO_ON_RESET (89) +-#define SPITZ_GPIO_BAT_COVER (90) +-#define SPITZ_GPIO_CF_CD (94) +-#define SPITZ_GPIO_ON_KEY (95) +-#define SPITZ_GPIO_SWA (97) +-#define SPITZ_GPIO_SWB (96) +-#define SPITZ_GPIO_CHRG_FULL (101) +-#define SPITZ_GPIO_CO (101) +-#define SPITZ_GPIO_CF_IRQ (105) +-#define SPITZ_GPIO_AC_IN (115) +-#define SPITZ_GPIO_HP_IN (116) ++/* This list refers to all GPIO pins either in defines or in comments. ++ * ++ * GPIO pins not listed: ++ * GPIO2 SYS_EN: System Power Enable ++ * GPIO5-GPIO8 PWR_CAP0-PWR_CAP3: sleep DC-DC converter power capacitors ++ * GPIO40 not connected ++ */ + +-/* Spitz Only GPIOs */ + +-#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ +-#define SPITZ_GPIO_CF2_CD (93) ++/* Spitz/Akita System GPIO */ ++ ++#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ ++#define SPITZ_GPIO_SYNC (16) /* IOPORT Wake Up (input) */ ++#define SPITZ_GPIO_NAND_CS (79) /* NAND Flash Chip Select */ ++#define SPITZ_GPIO_NC_10 (10) /* Not Connected (but used in kernel) */ ++/* This GPIO pin is connected: ++ * GPIO1_RST ++ */ + + ++/* Compact Flash Interface */ ++ ++/* Spitz/Akita Compact Flash Interface */ ++#define SPITZ_GPIO_CF_CD (94) /* CF IRQ */ ++#define SPITZ_GPIO_CF_IRQ (105) /* CF Ready */ ++/* These GPIO pins are connected: ++ * GPIO48_nPOE ++ * GPIO49_nPWE ++ * GPIO50_nPIOR ++ * GPIO51_nPIOW ++ * GPIO54_nPCE_2 ++ * GPIO55_nPREG ++ * GPIO56_nPWAIT ++ * GPIO57_nIOIS16 ++ * GPIO80_nCS_4 ++ * GPIO85_nPCE_1 ++ * GPIO104_pSKTSEL ++ */ ++ ++/* Spitz only Compact Flash Interface */ ++#define SPITZ_GPIO_CF2_CD (93) /* CF slot1 IRQ */ ++#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ ++/* This GPIO pin is connected: ++ * GPIO78_nCS_2 ++ */ ++ ++ ++/* Spitz/Akita Battery, Power and Service Connector */ ++ ++#define SPITZ_GPIO_FATAL_BAT (21) /* Fatal Battery */ ++#define SPITZ_GPIO_BAT_COVER (90) /* Battery Cover switch */ ++#define SPITZ_GPIO_BAT_COVER2 (15) /* Battery Cover switch, parallel pin */ ++#define SPITZ_GPIO_CHRG_FULL (101) /* Battery Full */ ++#define SPITZ_GPIO_AC_IN (115) /* External Power Supply is active */ ++#define SPITZ_GPIO_ON_RESET (89) /* Software Reset */ ++#define SPITZ_GPIO_SERVICE0 (83) /* Service Connector */ ++#define SPITZ_GPIO_SERVICE1 (84) /* Service Connector */ ++/* This GPIO pin is connected: ++ * GPIO18_RDY ++ */ ++ ++ ++/* Spitz/Akita Display Controller */ ++ ++#define SPITZ_GPIO_HSYNC (22) /* Line Sync Feedback */ ++/* These GPIO pins are connected: ++ * GPIO58_LDD_0-GPIO58_LDD_15 ++ * GPIO74_LCD_FCLK ++ * GPIO75_LCD_LCLK ++ * GPIO76_LCD_PCLK ++ * GPIO77_LCD_ACBIAS ++ */ ++ ++ ++/* Spitz/Akita SSP/SPI Bus and Devices */ ++ ++#define SPITZ_GPIO_SSP_CLK (19) /* SSP bus Clock */ ++#define SPITZ_GPIO_SSP_RXD (86) /* SSP bus RxD */ ++#define SPITZ_GPIO_SSP_TXD (87) /* SSP bus TxD */ ++#define SPITZ_GPIO_TP_INT (11) /* Touch Panel IRQ */ ++#define SPITZ_GPIO_ADS7846_CS (14) /* Touch Panel Controller Chip Select */ ++#define SPITZ_GPIO_MAX1111_CS (20) /* Multi Channel ADC Chip Select */ ++#define SPITZ_GPIO_LCDCON_CS (53) /* LCD Controller Chip Select */ ++ ++ ++/* Spitz/Akita Supplementary USB OTG Pins */ ++ ++#define SPITZ_GPIO_USB_DEVICE (35) /* USB Client power is present */ ++#define SPITZ_GPIO_USB_HOST (37) /* USB OTG 5V Host power supply control */ ++#define SPITZ_GPIO_USB_CONNECT (41) /* USB Host Cable is connected */ ++ ++ ++/* Spitz/Akita Audio */ ++ ++#define SPITZ_GPIO_HP_IN (116) /* CPU Headphone detect */ ++#define SPITZ_GPIO_AK_INT (13) /* Remote Control detect */ ++/* These GPIO AC97 pins are connected: ++ * GPIO28_BITCLK ++ * GPIO29_SDATA_IN ++ * GPIO30_SDATA_OUT ++ * GPIO31_SYNC ++ * GPIO113_AC97_RESET_N ++ */ ++ ++ ++/* Spitz/Akita SD Slot */ ++ ++#define SPITZ_GPIO_nSD_DETECT (9) /* SD Card Presence */ ++#define SPITZ_GPIO_nSD_WP (81) /* SD Write Protection */ ++/* These GPIO pins are connected: ++ * GPIO32_MMCCLK ++ * GPIO92_MMCDAT0 ++ * GPIO109_MMCDAT1 ++ * GPIO110_MMCDAT2 ++ * GPIO111_MMCDAT3 ++ * GPIO112_MMCCMD ++ */ ++ ++/* Spitz/Akita I2C bus */ ++#define SPITZ_GPIO_SCL (117) /* I2C SCL */ ++#define SPITZ_GPIO_SDA (118) /* I2C SDA */ ++#define SPITZ_GPIO_PWR_SCL (3) /* I2C SCL power */ ++#define SPITZ_GPIO_PWR_SDA (4) /* I2C SDA power */ ++ ++/* audio codec pins */ ++ ++ ++/* Spitz/Akita UART ports */ ++ ++/* Fully Featured UART - connected to IOPORT connector */ ++#define SPITZ_GPIO_FFRXD (102) /* IOPORT has nRXD inverted levels */ ++#define SPITZ_GPIO_FFTXD (99) /* IOPORT has nTXD inverted levels */ ++#define SPITZ_GPIO_FFRTS (98) ++#define SPITZ_GPIO_FFCTS (100) ++#define SPITZ_GPIO_FFDTR (82) ++#define SPITZ_GPIO_FFDSR (33) ++ ++/* These UART GPIO pins are connected to Bluetooth ++ * (only on Akita version with Bluetooth) ++ * GPIO42_BTRXD ++ * GPIO43_BTTXD ++ * GPIO44_BTCTS ++ * GPIO45_BTRTS ++ */ ++ ++/* These UART GPIO pins are connected to IrDA: ++ * GPIO46_STRXD ++ * GPIO47_STTXD ++ */ ++ + /* Spitz/Akita Keyboard Definitions */ + +-#define SPITZ_KEY_STROBE_NUM (11) +-#define SPITZ_KEY_SENSE_NUM (7) +-#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 +-#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 +-#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 +-#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 +-#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 +-#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 +-#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 +-#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 +- +-#define SPITZ_GPIO_KEY_STROBE0 88 +-#define SPITZ_GPIO_KEY_STROBE1 23 +-#define SPITZ_GPIO_KEY_STROBE2 24 +-#define SPITZ_GPIO_KEY_STROBE3 25 +-#define SPITZ_GPIO_KEY_STROBE4 26 +-#define SPITZ_GPIO_KEY_STROBE5 27 +-#define SPITZ_GPIO_KEY_STROBE6 52 +-#define SPITZ_GPIO_KEY_STROBE7 103 +-#define SPITZ_GPIO_KEY_STROBE8 107 +-#define SPITZ_GPIO_KEY_STROBE9 108 +-#define SPITZ_GPIO_KEY_STROBE10 114 +- +-#define SPITZ_GPIO_KEY_SENSE0 12 +-#define SPITZ_GPIO_KEY_SENSE1 17 +-#define SPITZ_GPIO_KEY_SENSE2 91 +-#define SPITZ_GPIO_KEY_SENSE3 34 +-#define SPITZ_GPIO_KEY_SENSE4 36 +-#define SPITZ_GPIO_KEY_SENSE5 38 +-#define SPITZ_GPIO_KEY_SENSE6 39 ++#define SPITZ_KEY_STROBE_NUM (11) ++#define SPITZ_KEY_SENSE_NUM (7) ++#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 ++#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 ++#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 ++#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 ++#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 ++#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 ++#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 ++#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 ++#define SPITZ_GPIO_KEY_STROBE0 (88) ++#define SPITZ_GPIO_KEY_STROBE1 (23) ++#define SPITZ_GPIO_KEY_STROBE2 (24) ++#define SPITZ_GPIO_KEY_STROBE3 (25) ++#define SPITZ_GPIO_KEY_STROBE4 (26) ++#define SPITZ_GPIO_KEY_STROBE5 (27) ++#define SPITZ_GPIO_KEY_STROBE6 (52) ++#define SPITZ_GPIO_KEY_STROBE7 (103) ++#define SPITZ_GPIO_KEY_STROBE8 (107) ++#define SPITZ_GPIO_KEY_STROBE9 (108) ++#define SPITZ_GPIO_KEY_STROBE10 (114) ++#define SPITZ_GPIO_KEY_SENSE0 (12) ++#define SPITZ_GPIO_KEY_SENSE1 (17) ++#define SPITZ_GPIO_KEY_SENSE2 (91) ++#define SPITZ_GPIO_KEY_SENSE3 (34) ++#define SPITZ_GPIO_KEY_SENSE4 (36) ++#define SPITZ_GPIO_KEY_SENSE5 (38) ++#define SPITZ_GPIO_KEY_SENSE6 (39) ++ ++#define SPITZ_GPIO_SWA (97) /* Keyboard Interrupt A */ ++#define SPITZ_GPIO_SWB (96) /* Keyboard Interrupt B */ ++#define SPITZ_GPIO_ON_KEY (95) /* Power On Key */ + + +-/* Spitz Scoop Device (No. 1) GPIOs */ ++/* Spitz/Akita Scoop Device (No. 1) GPIOs */ + /* Suspend States in comments */ +-#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ +-#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ +-#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ +-#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ +-#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ +-#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ +-#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ +-#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ +-#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ ++#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Green LED, Keep */ ++#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Fast Charge On, Keep */ ++#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Charge On, Keep */ ++#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Extra Mute Left, Low */ ++#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Extra Mute Right, Low */ ++#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* CF+SD Power Circuit, Keep */ ++#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Orange LED, Keep */ ++#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Dummy Load, Low */ ++#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Battery Sensor On, Low */ + + #define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ +- SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ +- SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) ++ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ ++ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) + #define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) + #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) + #define SPITZ_SCP_SUS_SET 0 + + /* Spitz Scoop Device (No. 2) GPIOs */ +-/* Suspend States in comments */ +-#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ +-#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ +-#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ +-#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ +-#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ +-#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ +-#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ +-#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ +-#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ ++/* Suspend States in comments ++ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */ ++#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* IrDA On, High */ ++#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Pull-Up for Remote, Keep */ ++#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ ++#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ ++#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ ++#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ ++#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Backlight Control, Low */ ++#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Backlight On, Low */ ++#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Mic Bias On, Low */ + + #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ +- SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ +- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) ++ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ ++ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) + + #define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) + #define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ +- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) ++ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) + #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) + + +-/* Spitz IRQ Definitions */ ++/* Spitz/Akita IRQ Definitions */ + +-#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) +-#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) +-#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) +-#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) +-#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) +-#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) +-#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) +-#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) +-#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) ++#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) ++#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) ++#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) ++#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) ++#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) ++#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) ++#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) ++#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) ++#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) + #define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) + #define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) +-#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) +-#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) +-#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) +-#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) +-#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) ++#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) ++#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) ++#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) ++#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) + #define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) + + /* +@@ -156,3 +274,5 @@ + extern struct platform_device spitzscoop2_device; + extern struct platform_device spitzssp_device; + extern struct sharpsl_charger_machinfo spitz_pm_machinfo; ++ ++#endif +Index: linux-2.6.24/sound/arm/pxa2xx-ac97.c +=================================================================== +--- linux-2.6.24.orig/sound/arm/pxa2xx-ac97.c 2008-01-24 22:58:37.000000000 +0000 ++++ linux-2.6.24/sound/arm/pxa2xx-ac97.c 2008-02-13 13:49:22.000000000 +0000 +@@ -133,10 +133,10 @@ + #ifdef CONFIG_PXA27x + /* warm reset broken on Bulverde, + so manually keep AC97 reset high */ +- pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); ++ pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); + udelay(10); + GCR |= GCR_WARM_RST; +- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); ++ pxa_gpio_mode(GPIO113_AC97_RESET_N_MD); + udelay(500); + #else + GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN; +@@ -335,7 +335,7 @@ + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); + #ifdef CONFIG_PXA27x + /* Use GPIO 113 as AC97 Reset on Bulverde */ +- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); ++ pxa_gpio_mode(GPIO113_AC97_RESET_N_MD); + #endif + pxa_set_cken(CKEN_AC97, 1); + |