diff options
Diffstat (limited to 'recipes/ixp4xx/ixp4xx-csr_2.1.bb')
| -rw-r--r-- | recipes/ixp4xx/ixp4xx-csr_2.1.bb | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/recipes/ixp4xx/ixp4xx-csr_2.1.bb b/recipes/ixp4xx/ixp4xx-csr_2.1.bb deleted file mode 100644 index e95f807107..0000000000 --- a/recipes/ixp4xx/ixp4xx-csr_2.1.bb +++ /dev/null @@ -1,112 +0,0 @@ -# Intel ixp4xx access library software. Note that this has an Intel -# license which restricts its use. -HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm" -LICENSE = "http://www.intel.com/design/network/swsup/np_sla/ixp400.htm" -LICENSE_HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm" -# You must download the following software to your OpenEmbedded downloads -# directory before using this package: -# -# IPL_ixp400AccessLibrary-2_1.zip -# IPL_ixp400NpeLibrary-2_1.zip -# -# To do this go to the LICENSE_HOMEPAGE above, register/login (using a -# web browser which is supported by the login page), this will give you -# access to the web page from which you can download the software - you -# need the: "Intel® IXP400 Software and RedBoot* Boot Loader" and, from -# this the "Intel Hardware Access Software" and "NPE Microcode" (both -# versions 2.1, encryption is not required.) -# -# Store the files with the names given below in your downloads directory -# and store the 32 character md5sum of the file in a file of the same -# name with the additional extension .md5: -# -# IPL_ixp400AccessLibrary-2_1.zip.md5 -# IPL_ixp400NpeLibrary-2_1.zip.md5 -# -SRC_URI = "http://www.intel.com/Please-Read-The-BB-File/IPL_ixp400AccessLibrary-2_1.zip" -SRC_URI += "http://www.intel.com/Please-Read-The-BB-File/IPL_ixp400NpeLibrary-2_1.zip" -SRC_URI += "file://Makefile.patch;patch=1" -SRC_URI += "file://ixethdb-header.patch;patch=1" -SRC_URI += "file://bit-macro.patch;patch=1" -SRC_URI += "file://ixnpemhconfigisr-is-private.patch;patch=1" -SRC_URI += "file://le.patch;patch=1" -SRC_URI += "file://mii-debug.patch;patch=1" -SRC_URI += "file://rtl8201-support.patch;patch=1" -SRC_URI += "file://gcc4.patch;patch=1" -SRC_URI += "file://oe-makefile.patch;patch=1" -SRC_URI += "file://livelock.patch;patch=1" -SRC_URI += "file://module-param.patch;patch=1" - -DEPENDS = "ixp-osal" -S = "${WORKDIR}/ixp400_xscale_sw" -PR = "r12" - -COMPATIBLE_HOST = "^arm.*-linux.*" -COMPATIBLE_MACHINE = "(nslu2|ixp4xx)" - -inherit module - -IX_TARGET = "linux${SITEINFO_ENDIANESS}" -IX_ENSURE = "" -#IX_ENSURE = "IX_OSAL_ENSURE_ON=1" - -OSAL_PATH = "lib/ixp425/linux/${IX_TARGET}" -# This is a somewhat arbitrary choice: -OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal" - -# COMPONENTS: do not build all the components, this just creates a -# ridiculously large module which duplicates functionality in the -# available Linux drivers. -COMPONENTS = "qmgr npeMh npeDl ethAcc ethDB ethMii featureCtrl osServices oslinux" -CODELETS_COMPONENTS = "" - -# NOTE: IX_INCLUDE_MICROCODE causes the microcode to be included in -# the ixp4xx-csr module, this *requires* the IPL_ixp400NpeLibrary-2_1.zip -# to be added to the SRC_URI - see above. -EXTRA_OEMAKE = "'AR=${AR}' \ - 'IX_XSCALE_SW=${S}' \ - 'IX_TARGET=${IX_TARGET}' \ - '${IX_TARGET}_COMPONENTS=${COMPONENTS}' \ - '${IX_TARGET}_CODELETS_COMPONENTS=${CODELETS_COMPONENTS}' \ - 'IX_DEVICE=ixp42X' \ - 'IX_INCLUDE_MICROCODE=1' \ - 'IX_UTOPIAMODE=0' \ - 'IX_MPHYSINGLEPORT=1' \ - ${IX_ENSURE} \ - 'LINUX_SRC=${STAGING_KERNEL_DIR}' \ - 'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \ - 'OSAL_DIR=${OSAL_DIR}' \ - 'OSAL_IMAGE=${OSAL_DIR}/${OSAL_PATH}/libosal.a' \ - 'OSAL_MODULE=${OSAL_DIR}/${OSAL_PATH}/ixp_osal.o' \ - " - -MAKE_TARGETS = "lib/${IX_TARGET}/ixp400.o" - -KCONFIG_FILE = "${STAGING_KERNEL_DIR}/kernel-config" -do_stage () { - install -d ${STAGING_INCDIR}/linux/ixp4xx-csr - install -m 0644 src/include/*.h ${STAGING_INCDIR}/linux/ixp4xx-csr/ - # Since Module.symvers in the kernel staging directory doesn't include - # the symbols from ixp400.o we need to add them to another file for - # the ixp400-eth build - rm -f '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' - . '${KCONFIG_FILE}' - if '${STAGING_KERNEL_DIR}/scripts/mod/modpost' \ - ${CONFIG_MODVERSIONS:+-m} \ - ${CONFIG_MODULE_SRCVERSION_ALL:+-a} \ - -i '${STAGING_KERNEL_DIR}/Module.symvers' \ - -o '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' \ - ${MAKE_TARGETS} 2>&1 | egrep . - then - echo "MODPOST errors - see above" - return 1 - else - return 0 - fi -} - - -do_install () { - install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/ixp400 - install -m 0644 lib/${IX_TARGET}/ixp400.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/ixp400/ -} |