diff options
Diffstat (limited to 'recipes/initscripts/initscripts-openmoko')
9 files changed, 658 insertions, 0 deletions
diff --git a/recipes/initscripts/initscripts-openmoko/bootmisc.sh b/recipes/initscripts/initscripts-openmoko/bootmisc.sh new file mode 100644 index 0000000000..4511e12fc1 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/bootmisc.sh @@ -0,0 +1,47 @@ +# +# bootmisc.sh Miscellaneous things to be done during bootup. +# + +. /etc/default/rcS +# +# Put a nologin file in /etc to prevent people from logging in before +# system startup is complete. +# +if test "$DELAYLOGIN" = yes +then + echo "System bootup in progress - please wait" > /etc/nologin + cp /etc/nologin /etc/nologin.boot +fi + +# +# Update /etc/motd. +# +if test "$EDITMOTD" != no +then + uname -a > /etc/motd.tmp + sed 1d /etc/motd >> /etc/motd.tmp + mv /etc/motd.tmp /etc/motd +fi + +# +# Update dynamic library cache +# +#/sbin/ldconfig + +# Set the system clock from hardware clock +# If the timestamp is 1 day or more recent than the current time, +# use the timestamp instead. +[ "$UTC" = yes ] || /etc/init.d/hwclock.sh start + +if ! test -f /etc/.configured && test -e /etc/timestamp +then + SYSTEMDATE=`date "+%Y%m%d"` + TIMESTAMP=`cat /etc/timestamp | awk '{ print substr($0,9,4) substr($0,1,4);}'` + NEEDUPDATE=`expr \( $TIMESTAMP \> $SYSTEMDATE \)` + if [ $NEEDUPDATE -eq 1 ]; then + date `cat /etc/timestamp` + /etc/init.d/hwclock.sh stop + fi +fi + +: exit 0 diff --git a/recipes/initscripts/initscripts-openmoko/campgsm b/recipes/initscripts/initscripts-openmoko/campgsm new file mode 100644 index 0000000000..5be67086c2 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/campgsm @@ -0,0 +1,128 @@ +#!/bin/sh + +VERBOSE=no + +PIDS=`pidof -x "$0"` + +# make sure pidof sees us +if [ -z "$PIDS" ]; then + exec "$0" + exit 1 +fi + +GSM_DEVICE="/dev/ttySAC0" +GSM_POWER="/sys/devices/platform/neo1973-pm-gsm.0/power_on" +GSM_RESET="/sys/devices/platform/neo1973-pm-gsm.0/reset" + +GSM_COMMANDS="Z E0V1 +CFUN=1 +COPS=0" + +gsm_running () { + if [ "$PIDS" != "$$" ]; then + return 0 + else + return 1 + fi +} + +gsm_send () { + cmd="$1" + echo -ne "AT${cmd}\r" > "$GSM_DEVICE" +} + +# this function might block forever +gsm_wait () { + ret="UNKNOWN" + + while read status; do + case "$status" in + OK*) + ret="OK" + ;; + ERROR*) + ret="ERROR" + ;; + *) + ret="UNKNOWN" + ;; + esac + if [ "x$ret" != "xUNKNOWN" ]; then + break + fi + done < "$GSM_DEVICE" + + if [ "x$ret" != "xOK" ]; then + return 1 + fi + + return 0 +} + +gsm_setup () { + [ $VERBOSE == "yes" ] && echo -n "Powering up GSM modem..." + echo 0 > "$GSM_POWER"; sleep 1 + echo 1 > "$GSM_POWER"; sleep 1 + echo 1 > "$GSM_RESET"; sleep 1 + echo 0 > "$GSM_RESET"; sleep 4 + [ $VERBOSE == "yes" ] && echo "done" + + stty -F "$GSM_DEVICE" cooked -opost -echo crtscts 115200 +} + +gsm_wakeup () { + [ $VERBOSE == "yes" ] && echo "Waking up GSM modem" + + # there is at most one OK/ERROR even if we send multiple commands + gsm_send "" + gsm_send "" + gsm_send "" + + if gsm_wait; then + [ $VERBOSE == "yes" ] && echo "GSM modem awake" + return 0 + else + echo "failed to wake up GSM modem" + return 1 + fi +} + +start () { + gsm_setup + + if gsm_wakeup; then + for cmd in $GSM_COMMANDS + do + [ $VERBOSE == "yes" ] && echo "Sending AT$cmd" + gsm_send "$cmd" + + if ! gsm_wait; then + echo "AT$cmd failed" + break + fi + done + fi +} + +set -e + +case "$1" in + start) + if gsm_running; then + echo "Another instance is already running" + exit 1 + fi + + start & + ;; + stop) + if gsm_running; then + PIDS=`pidof -x -o "$$" "$0"` + echo -n "Stopping other instances..." + kill $PIDS + echo "done" + fi + ;; + *) + echo "Usage: $0 {start|stop}" + exit 1 + ;; +esac diff --git a/recipes/initscripts/initscripts-openmoko/checkroot.sh b/recipes/initscripts/initscripts-openmoko/checkroot.sh new file mode 100644 index 0000000000..029ae9b405 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/checkroot.sh @@ -0,0 +1,43 @@ +# +# checkroot.sh Check to root filesystem. +# +# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl +# + +. /etc/default/rcS + +# +# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned +# from this script *before anything else* with a timeout, like SCO does. +# +test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE + +# +# If the root filesystem was not marked as read-only in /etc/fstab, +# remount the rootfs rw but do not try to change mtab because it +# is on a ro fs until the remount succeeded. Then clean up old mtabs +# and finally write the new mtab. +# This part is only needed if the rootfs was mounted ro. +# +ROOTFSDEV="/dev/root" +if grep -q "^$ROOTFSDEV .* rw" /proc/mounts; then + echo "Root filesystem already read-write, not remounting" +else + rootmode=rw + + echo "Remounting root file system..." + mount -n -o remount,noatime,$rootmode / + if test "$rootmode" = rw + then + if test ! -L /etc/mtab + then + rm -f /etc/mtab~ /etc/nologin + : > /etc/mtab + fi + mount -f -o remount / + mount -f /proc + test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" + fi +fi + +: exit 0 diff --git a/recipes/initscripts/initscripts-openmoko/led-trigger.sh b/recipes/initscripts/initscripts-openmoko/led-trigger.sh new file mode 100644 index 0000000000..9583ce9331 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/led-trigger.sh @@ -0,0 +1,6 @@ +#! /bin/sh +sys_led_trigger="/sys/devices/platform/gta02-led.0/leds/gta02-aux:red/trigger" +if test -e $sys_led_trigger ;then + echo bat-charging > $sys_led_trigger +fi + diff --git a/recipes/initscripts/initscripts-openmoko/mountall.sh b/recipes/initscripts/initscripts-openmoko/mountall.sh new file mode 100644 index 0000000000..4bd7bbb02c --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/mountall.sh @@ -0,0 +1,52 @@ +# +# mountall.sh Mount all filesystems. +# +# Version: @(#)mountall.sh 2.83-2 01-Nov-2001 miquels@cistron.nl +# +. /etc/default/rcS +if test -f /etc/default/mountall; then + . /etc/default/mountall +fi + +# +# Mount local filesystems in /etc/fstab. For some reason, people +# might want to mount "proc" several times, and mount -v complains +# about this. So we mount "proc" filesystems without -v. +# +test "$VERBOSE" != no && echo "Mounting local filesystems..." +mount -a $MOUNTALL + +# +# We might have mounted something over /dev, see if /dev/initctl is there. +# +if test ! -p /dev/initctl +then + rm -f /dev/initctl + mknod -m 600 /dev/initctl p +fi +kill -USR1 1 + +# +# Execute swapon command again, in case we want to swap to +# a file on a now mounted filesystem. +# +doswap=yes +if test $doswap = yes +then + swapon -a 2> /dev/null +fi + +# A missing homedirectory for root can cause all sorts of problems. +# This can happen after user formats his /home partition for example + +if test -e /etc/passwd +then + ROOT_HOME="`grep root /etc/passwd | cut -d: -f6`" + + if test -n "$ROOT_HOME" + then + ! test -d "$ROOT_HOME" && mkdir -p "$ROOT_HOME" + fi +fi +: exit 0 + diff --git a/recipes/initscripts/initscripts-openmoko/mountdevsubfs.sh b/recipes/initscripts/initscripts-openmoko/mountdevsubfs.sh new file mode 100644 index 0000000000..c6cfb05af2 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/mountdevsubfs.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +. /etc/default/devpts + +test -c /dev/ptmx || mknod -m 666 /dev/ptmx c 5 2 + +if [ -d /dev/pts ]; then + mount -n -t devpts devpts /dev/pts -ogid=${TTYGRP},mode=${TTYMODE} +fi + + +if [ -d /dev/shm ]; then + mount -n -t tmpfs shmfs /dev/shm -omode=0777 +fi diff --git a/recipes/initscripts/initscripts-openmoko/mountkernfs.sh b/recipes/initscripts/initscripts-openmoko/mountkernfs.sh new file mode 100644 index 0000000000..1ed09fcf05 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/mountkernfs.sh @@ -0,0 +1,33 @@ +#!/bin/sh + +supported_kernel() { + case "$(uname -r)" in + 2.[012345].*|2.6.[0-9]|2.6.[0-9][!0-9]*) return 1 ;; + 2.6.1[0-7]|2.6.1[0-7][!0-9]*) return 1 ;; + esac + return 0 +} + +check_kernel() { + if ! supported_kernel; then + echo "WARNING: kernel < 2.6.18" + fi + + if ! grep -qs devpts /proc/filesystems; then + echo "WARNING: kernel does not support devpts" + fi + + if ! grep -qs tmpfs /proc/filesystems; then + echo "WARNING: kernel does not support tmpfs" + fi +} + +if [ -d /proc ]; then + mount -n -t proc proc /proc +fi + +check_kernel + +if [ -d /sys ]; then + mount -n -t sysfs sysfs /sys +fi diff --git a/recipes/initscripts/initscripts-openmoko/mountnfs.sh b/recipes/initscripts/initscripts-openmoko/mountnfs.sh new file mode 100644 index 0000000000..2631392483 --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/mountnfs.sh @@ -0,0 +1,87 @@ +# +# mountnfs.sh Now that TCP/IP is configured, mount the NFS file +# systems in /etc/fstab if needed. If possible, +# start the portmapper before mounting (this is needed for +# Linux 2.1.x and up). +# +# Also mounts SBM filesystems now, so the name of +# this script is getting increasingly inaccurate. +# +# Version: @(#)mountnfs.sh 2.83 05-Oct-2001 miquels@cistron.nl +# + +. /etc/default/rcS + +# +# Run in a subshell because of I/O redirection. +# +test -x /sbin/portmap && test -f /etc/fstab && ( + +# +# Read through fstab line by line. If it is NFS, set the flag +# for mounting NFS filesystems. If any NFS partition is found and it +# not mounted with the nolock option, we start the portmapper. +# +portmap=no +mount_nfs=no +mount_smb=no +mount_ncp=no +while read device mountpt fstype options +do + case "$device" in + ""|\#*) + continue + ;; + esac + + case "$options" in + *noauto*) + continue + ;; + esac + + if test "$fstype" = nfs + then + mount_nfs=yes + case "$options" in + *nolock*) + ;; + *) + portmap=yes + ;; + esac + fi + if test "$fstype" = smbfs + then + mount_smb=yes + fi + if test "$fstype" = ncpfs + then + mount_ncp=yes + fi +done + +exec 0>&1 + +if test "$portmap" = yes +then + if test -x /sbin/portmap + then + echo -n "Starting portmapper... " + start-stop-daemon --start --quiet --exec /sbin/portmap + sleep 2 + fi +fi + +if test "$mount_nfs" = yes || test "$mount_smb" = yes || test "$mount_ncp" = yes +then + echo "Mounting remote filesystems..." + test "$mount_nfs" = yes && mount -a -t nfs + test "$mount_smb" = yes && mount -a -t smbfs + test "$mount_ncp" = yes && mount -a -t ncpfs +fi + +) < /etc/fstab + +: exit 0 + diff --git a/recipes/initscripts/initscripts-openmoko/populate-volatile.sh b/recipes/initscripts/initscripts-openmoko/populate-volatile.sh new file mode 100644 index 0000000000..6fb23d758d --- /dev/null +++ b/recipes/initscripts/initscripts-openmoko/populate-volatile.sh @@ -0,0 +1,248 @@ +#!/bin/sh + +. /etc/default/rcS + +CFGDIR="/etc/default/volatiles" +TMPROOT="/var/tmp" +COREDEF="00_core" + +[ "${VERBOSE}" != "no" ] && echo "Populating volatile Filesystems." + +create_file() { + EXEC=" + touch \"$1\"; + chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; + chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " + + test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache + + [ -e "$1" ] && { + [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." + } || { + eval $EXEC + } +} + +mk_dir() { + EXEC=" + mkdir -p \"$1\"; + chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; + chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " + + test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache + + [ -e "$1" ] && { + [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." + } || { + eval $EXEC + } +} + +link_file() { + EXEC="test -e \"$2\" -o -L $2 || ln -s \"$1\" \"$2\" >/dev/tty0 2>&1" + + test "$VOLATILE_ENABLE_CACHE" = yes && echo " $EXEC" >> /etc/volatile.cache + + [ -e "$2" ] && { + echo "Cannot create link over existing -${TNAME}-." >&2 + } || { + eval $EXEC + } +} + +check_requirements() { + + cleanup() { + rm "${TMP_INTERMED}" + rm "${TMP_DEFINED}" + rm "${TMP_COMBINED}" + } + + CFGFILE="$1" + + [ `basename "${CFGFILE}"` = "${COREDEF}" ] && return 0 + + TMP_INTERMED="${TMPROOT}/tmp.$$" + TMP_DEFINED="${TMPROOT}/tmpdefined.$$" + TMP_COMBINED="${TMPROOT}/tmpcombined.$$" + + + cat /etc/passwd | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" + cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 2 > "${TMP_INTERMED}" + cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" + + NR_DEFINED_USERS="`cat "${TMP_DEFINED}" | wc -l`" + NR_COMBINED_USERS="`cat "${TMP_COMBINED}" | wc -l`" + + [ "${NR_DEFINED_USERS}" -ne "${NR_COMBINED_USERS}" ] && { + echo "Undefined users:" + diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" + cleanup + return 1 + } + + + cat /etc/group | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" + cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 3 > "${TMP_INTERMED}" + cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" + + NR_DEFINED_GROUPS="`cat "${TMP_DEFINED}" | wc -l`" + NR_COMBINED_GROUPS="`cat "${TMP_COMBINED}" | wc -l`" + + [ "${NR_DEFINED_GROUPS}" -ne "${NR_COMBINED_GROUPS}" ] && { + echo "Undefined groups:" + diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" + cleanup + return 1 + } + + # Add checks for required directories here + + cleanup + return 0 + } + +apply_cfgfile() { + + CFGFILE="$1" + + check_requirements "${CFGFILE}" || { + echo "Skipping ${CFGFILE}" + return 1 + } + + cat ${CFGFILE} | grep -v "^#" | \ + while read LINE; do + + eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ \(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 TLTARGET=\6/p"` + + [ "${VERBOSE}" != "no" ] && echo "Checking for -${TNAME}-." + + + [ "${TTYPE}" = "l" ] && { + TSOURCE="$TLTARGET" + [ -L "${TNAME}" ] || { + [ "${VERBOSE}" != "no" ] && echo "Creating link -${TNAME}- pointing to -${TSOURCE}-." + link_file "${TSOURCE}" "${TNAME}" + } + continue + } + + [ -L "${TNAME}" ] && { + [ "${VERBOSE}" != "no" ] && echo "Found link." + NEWNAME=`ls -l "${TNAME}" | sed -e 's/^.*-> \(.*\)$/\1/'` + echo ${NEWNAME} | grep -v "^/" >/dev/null && { + TNAME="`echo ${TNAME} | sed -e 's@\(.*\)/.*@\1@'`/${NEWNAME}" + [ "${VERBOSE}" != "no" ] && echo "Converted relative linktarget to absolute path -${TNAME}-." + } || { + TNAME="${NEWNAME}" + [ "${VERBOSE}" != "no" ] && echo "Using absolute link target -${TNAME}-." + } + } + + case "${TTYPE}" in + "f") [ "${VERBOSE}" != "no" ] && echo "Creating file -${TNAME}-." + create_file "${TNAME}" + ;; + "d") [ "${VERBOSE}" != "no" ] && echo "Creating directory -${TNAME}-." + mk_dir "${TNAME}" + # Add check to see if there's an entry in fstab to mount. + ;; + *) [ "${VERBOSE}" != "no" ] && echo "Invalid type -${TTYPE}-." + continue + ;; + esac + + + done + + return 0 + + } + +SKEL_DIR="/etc/volatile/skel" + +skel_mount() { + VOLATILE="$1" + + [ -d "$VOLATILE" ] || mkdir -p "$VOLATILE" + + mount -t tmpfs volatile "$VOLATILE" -omode=0755 +} + +skel_load() { + VOLATILE="$1" + + if ! skel_mount "$VOLATILE"; then + echo "failed to mount $VOLATILE" + return 1 + fi + + cp -a "$SKEL_DIR"/* "$VOLATILE"/ +} + +skel_update() { + VOLATILE="$1" + + if ! skel_mount "$VOLATILE"; then + echo "failed to update" + return 1 + fi + + echo -n "Populating volatile directory..." + for file in `ls -1 "${CFGDIR}" | sort`; do + apply_cfgfile "${CFGDIR}/${file}" + done + echo "done" + + if [ -d "$SKEL_DIR" ]; then + rm -rf "$SKEL_DIR" + fi + + mkdir -p "$SKEL_DIR"/tmp + cp -a "$VOLATILE"/* "$SKEL_DIR"/ +} + +populate() { + if [ -d "$SKEL_DIR"/tmp ]; then + skel_load /var/volatile + else + skel_update /var/volatile + fi + + for d in /var/volatile/* + do + ln -sf "$d" /var + done + + if ! test -L /tmp; then + rm -rf /tmp + ln -sf /var/tmp /tmp + fi +} + +case "$1" in + start) + if grep -q "^volatile " /proc/mounts; then + echo "volatile directory is already mounted" + else + populate + fi + ;; + stop) + : # no-op + ;; + update) + if skel_update /var/volatile; then + umount /var/volatile + if grep -q "^volatile " /proc/mounts; then + cp -a "$SKEL_DIR"/* /var/volatile + fi + fi + ;; + *) + echo "Usage: /etc/init.d/populate-volatile {start|stop|update}" + ;; +esac + +: exit 0 |