diff options
Diffstat (limited to 'packages')
7 files changed, 8950 insertions, 0 deletions
diff --git a/packages/uboot/u-boot-linkstationppc/.mtn2git_empty b/packages/uboot/u-boot-linkstationppc/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/.mtn2git_empty diff --git a/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchd b/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchd new file mode 100644 index 0000000000..5919f5eb2c --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchd @@ -0,0 +1,500 @@ +/* + * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#if 0 +#define DEBUG +#endif + +/*----------------------------------------------------------------------- + * User configurable settings: + * Mandatory settings: + * CONFIG_IPADDR_LS - the IP address of the LinkStation + * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP + * Optional settins: + * CONFIG_NCIP_LS - the adress of the computer running net console + * if not configured, it will be set to + * CONFIG_SERVERIP_LS + */ + +#define CONFIG_IPADDR_LS 192.168.11.150 +#define CONFIG_SERVERIP_LS 192.168.11.149 + +#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS) +#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined +#endif + +#if !defined(CONFIG_NCIP_LS) +#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS +#endif + +/*---------------------------------------------------------------------- + * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING + *---------------------------------------------------------------------*/ + +#define CONFIG_MPC8245 1 +#define CONFIG_LINKSTATION 1 + +/*--------------------------------------- + * Supported models + * + * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN) + * LinkStation old model (CONFIG_LAN) - totally untested + * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN) + * + * Models not supported yet + * TeraStatin (CONFIG_HTGL) + */ + +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define CONFIG_IDENT_STRING " LinkStation / KuroBox" +#elif defined(CONFIG_HGLAN) +#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG" +#elif defined(CONFIG_HTGL) +#define CONFIG_IDENT_STRING " TeraStation" +#else +#error No LinkStation model defined +#endif + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#undef CONFIG_BOOT_RETRY_TIME + +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..." +#define CONFIG_AUTOBOOT_STOP_STR "s" + +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_FLASH | \ + CFG_CMD_MEMORY | \ + CFG_CMD_NET | \ + CFG_CMD_ENV | \ + CFG_CMD_IDE | \ + CFG_CMD_PCI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_CONSOLE | \ + CFG_CMD_RUN | \ + CFG_CMD_ECHO | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_NFS | \ + CFG_CMD_EXT2 ) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL + +#define CONFIG_OF_FLAT_TREE 1 + +#ifdef CONFIG_OF_FLAT_TREE +#define OF_CPU "PowerPC,603e" +#define OF_SOC "soc10x@80000000" +#define OF_STDOUT_PATH "/soc10x/serial@80004600" +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ + +//#define CONFIG_BOOTCOMMAND "run nfsboot" +#define CONFIG_BOOTCOMMAND "run bootcmd1" +#define CONFIG_BOOTARGS "root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32" +#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" + +#define CFG_CONSOLE_IS_IN_ENV + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define UBFILE "share/u-boot/u-boot-hd.flash.bin" +#elif defined(CONFIG_HGLAN) +#define UBFILE "share/u-boot/u-boot-hg.flash.bin" +#elif defined(CONFIG_HTGL) +#define UBFILE "share/u-boot/u-boot-ht.flash.bin" +#else +#error No LinkStation model defined +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=no\0" \ + "stdin=nc\0" \ + "stdout=nc\0" \ + "stderr=nc\0" \ + "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \ + "netmask=255.255.255.0\0" \ + "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \ + "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \ + "netretry=no\0" \ + "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ + "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ + "ldaddr=800000\0" \ + "hdpart=0:1\0" \ + "hdfile=boot/uImage\0" \ + "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHD.dtb\0" \ + "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \ + "hdboot=run hdload boothd\0" \ + "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ + "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ + "bootretry=30\0" \ + "bootcmd1=run hdboot;run flboot\0" \ + "bootcmd2=run flboot\0" \ + "bootcmd3=run emboot\0" \ + "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \ + "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \ + "ubpart=0:1\0" \ + "ubfile="UBFILE"\0" \ + "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \ + "ubsaddr=fff00000\0" \ + "ubeaddr=fff2ffff\0" \ + "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \ + "upgrade=run ubload ubflash\0" + +/*----------------------------------------------------------------------- + * PCI stuff + */ +#define CONFIG_PCI +#undef CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW + +#ifndef CONFIG_PCI_PNP +/* Keep the following defines in sync with the BAT mappings */ + +#define PCI_ETH_IOADDR 0xbfff00 +#define PCI_ETH_MEMADDR 0xbffffc00 +#define PCI_IDE_IOADDR 0xbffed0 +#define PCI_IDE_MEMADDR 0xbffffb00 +#define PCI_USB0_IOADDR 0 +#define PCI_USB0_MEMADDR 0xbfffe000 +#define PCI_USB1_IOADDR 0 +#define PCI_USB1_MEMADDR 0xbfffd000 +#define PCI_USB2_IOADDR 0 +#define PCI_USB2_MEMADDR 0xbfffcf00 + +#endif + +/*----------------------------------------------------------------------- + * Ethernet stuff + */ +#define CONFIG_NET_MULTI + +#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) +#define CONFIG_TULIP +#define CONFIG_TULIP_USE_IO +#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) +#define CONFIG_RTL8169 +#endif + +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_NETCONSOLE + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_BASE TEXT_BASE + +#define CFG_RESET_ADDRESS 0xFFF00100 +#define CFG_EUMB_ADDR 0x80000000 +#define CFG_PCI_MEM_ADDR 0xB0000000 +#define CFG_MISC_REGION_ADDR 0xFE000000 + +#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ + +/* Maximum amount of RAM */ +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ +#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) +#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ +#else +#error Unknown LinkStation type +#endif + +/*----------------------------------------------------------------------- + * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build + * + * RAM based builds are for testing purposes. A Linux module, uloader.o, + * exists to load U-Boot and pass control to it + * + * Always do "make clean" after changing the build type + */ +#if CFG_MONITOR_BASE < CFG_FLASH_BASE +#define CFG_RAMBOOT +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ +#if 1 /* RAM is available when the first C function is called */ +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE - 0x1000) +#else +#define CFG_INIT_RAM_ADDR 0x40000000 +#endif +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/*---------------------------------------------------------------------- + * Serial configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL + +#define CFG_NS16550_REG_SIZE 1 + +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4600) /* Console port */ +#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4500) /* AVR port */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + * For the detail description refer to the MPC8245 user's manual. + * + * Unless indicated otherwise, the values are + * taken from the orignal Linkstation boot code + * + * Most of the low level configuration setttings are normally used + * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation. + * Low level initialisation is done in board/linkstation/early_init.S + * The values below are included for reference purpose only + */ + +/* FIXME: 32.768 MHz is the crystal frequency but */ +/* the real frequency is lower by about 0.75% */ +#define CONFIG_SYS_CLK_FREQ 32768000 +#define CFG_HZ 1000 + +/* Bit-field values for MCCR1. */ +#define CFG_ROMNAL 0 +#define CFG_ROMFAL 11 + +#define CFG_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ +#define CFG_BANK1_ROW 0 +#define CFG_BANK2_ROW 0 +#define CFG_BANK3_ROW 0 +#define CFG_BANK4_ROW 0 +#define CFG_BANK5_ROW 0 +#define CFG_BANK6_ROW 0 +#define CFG_BANK7_ROW 0 + +/* Bit-field values for MCCR2. */ +#define CFG_TSWAIT 0 +#define CFG_REFINT 1400 + +/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ +#define CFG_BSTOPRE 121 + +/* Bit-field values for MCCR3. */ +#define CFG_REFREC 7 + +/* Bit-field values for MCCR4. */ +#define CFG_PRETOACT 2 +#define CFG_ACTTOPRE 5 /* Original value was 2 */ +#define CFG_ACTORW 2 +#define CFG_SDMODE_CAS_LAT 2 /* For 100MHz bus. Use 3 for 133MHz */ +#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CFG_EXTROM 1 /* Original setting but there is no EXTROM */ +#define CFG_REGDIMM 0 +#define CFG_DBUS_SIZE2 1 +#define CFG_SDMODE_WRAP 0 + +#define CFG_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ +#define CFG_SDRAM_DSCD 0x30 + +/* Memory bank settings. + * Only bits 20-29 are actually used from these vales to set the + * start/end addresses. The upper two bits will always be 0, and the lower + * 20 bits will be 0x00000 for a start address, or 0xfffff for an end + * address. Refer to the MPC8240 book. + */ + +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0x95 /* 0x15 or 0x95 ? */ + +/*---------------------------------------------------------------------- + * Initial BAT mappings + */ + +/* NOTES: + * 1) GUARDED and WRITETHROUGH not allowed in IBATS + * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT + */ + +/* SDRAM */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* EUMB: 1MB of address space */ +#define CFG_IBAT1L (CFG_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT1U (CFG_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) + +#define CFG_DBAT1L (CFG_IBAT1L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U CFG_IBAT1U + +/* PCI Mem: 256MB of address space */ +#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT2L (CFG_IBAT2L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +/* PCI and local ROM/Flash: last 32MB of address space */ +#define CFG_IBAT3L (CFG_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (CFG_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) + +#define CFG_DBAT3L (CFG_IBAT3L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + * + * FIXME: This doesn't appear to be true for the newer kernels + * which map more that 8 MB + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#undef CFG_FLASH_PROTECTION +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ + +#define CFG_FLASH_ERASE_TOUT 12000 +#define CFG_FLASH_WRITE_TOUT 1000 + + +#define CFG_ENV_IS_IN_FLASH +/* + * The original LinkStation flash organisation uses + * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader + * We use the last sector of this area to store the environment + * which leaves max. 384 kB for the U-Boot itself + */ +#define CFG_ENV_ADDR 0xFFF60000 +#define CFG_ENV_SIZE 0x00010000 +#define CFG_ENV_SECT_SIZE 0x00010000 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * IDE/ATA definitions + */ +#undef CONFIG_IDE_LED /* No IDE LED */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ +#define CONFIG_LBA48 /* 48 bit LBA supported */ + +#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) +#define CFG_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ +#elif defined(CONFIG_HGTL) +#define CFG_IDE_MAXBUS 2 /* Max. 2 IDE busses */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#else +#error Config IDE: Unknown LinkStation type +#endif + +#define CFG_ATA_BASE_ADDR 0 + +#define CFG_ATA_DATA_OFFSET 0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0 /* Offset for normal registers */ +#define CFG_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ + +/*----------------------------------------------------------------------- + * Partitions and file system + */ +#define CONFIG_DOS_PARTITION + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ + +/* vim: set ts=4: */ diff --git a/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchg b/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchg new file mode 100644 index 0000000000..b9943b4c76 --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/defconfig_linkstationppchg @@ -0,0 +1,500 @@ +/* + * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#if 0 +#define DEBUG +#endif + +/*----------------------------------------------------------------------- + * User configurable settings: + * Mandatory settings: + * CONFIG_IPADDR_LS - the IP address of the LinkStation + * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP + * Optional settins: + * CONFIG_NCIP_LS - the adress of the computer running net console + * if not configured, it will be set to + * CONFIG_SERVERIP_LS + */ + +#define CONFIG_IPADDR_LS 192.168.11.150 +#define CONFIG_SERVERIP_LS 192.168.11.149 + +#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS) +#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined +#endif + +#if !defined(CONFIG_NCIP_LS) +#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS +#endif + +/*---------------------------------------------------------------------- + * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING + *---------------------------------------------------------------------*/ + +#define CONFIG_MPC8245 1 +#define CONFIG_LINKSTATION 1 + +/*--------------------------------------- + * Supported models + * + * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN) + * LinkStation old model (CONFIG_LAN) - totally untested + * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN) + * + * Models not supported yet + * TeraStatin (CONFIG_HTGL) + */ + +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define CONFIG_IDENT_STRING " LinkStation / KuroBox" +#elif defined(CONFIG_HGLAN) +#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG" +#elif defined(CONFIG_HTGL) +#define CONFIG_IDENT_STRING " TeraStation" +#else +#error No LinkStation model defined +#endif + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#undef CONFIG_BOOT_RETRY_TIME + +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..." +#define CONFIG_AUTOBOOT_STOP_STR "s" + +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_FLASH | \ + CFG_CMD_MEMORY | \ + CFG_CMD_NET | \ + CFG_CMD_ENV | \ + CFG_CMD_IDE | \ + CFG_CMD_PCI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_CONSOLE | \ + CFG_CMD_RUN | \ + CFG_CMD_ECHO | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_NFS | \ + CFG_CMD_EXT2 ) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL + +#define CONFIG_OF_FLAT_TREE 1 + +#ifdef CONFIG_OF_FLAT_TREE +#define OF_CPU "PowerPC,603e" +#define OF_SOC "soc10x@80000000" +#define OF_STDOUT_PATH "/soc10x/serial@80004600" +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ + +//#define CONFIG_BOOTCOMMAND "run nfsboot" +#define CONFIG_BOOTCOMMAND "run bootcmd1" +#define CONFIG_BOOTARGS "root=/dev/sda1 netconsole=6666@192.168.11.150/,@192.168.11.149/ rtc-rs5c372.probe=0,0x32" +#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" + +#define CFG_CONSOLE_IS_IN_ENV + +#define XMK_STR(x) #x +#define MK_STR(x) XMK_STR(x) + +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define UBFILE "share/u-boot/u-boot-hd.flash.bin" +#elif defined(CONFIG_HGLAN) +#define UBFILE "share/u-boot/u-boot-hg.flash.bin" +#elif defined(CONFIG_HTGL) +#define UBFILE "share/u-boot/u-boot-ht.flash.bin" +#else +#error No LinkStation model defined +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=no\0" \ + "stdin=nc\0" \ + "stdout=nc\0" \ + "stderr=nc\0" \ + "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \ + "netmask=255.255.255.0\0" \ + "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \ + "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \ + "netretry=no\0" \ + "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ + "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ + "ldaddr=800000\0" \ + "hdpart=0:1\0" \ + "hdfile=boot/uImage\0" \ + "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \ + "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \ + "hdboot=run hdload boothd\0" \ + "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ + "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ + "bootretry=30\0" \ + "bootcmd1=run hdboot;run flboot\0" \ + "bootcmd2=run flboot\0" \ + "bootcmd3=run emboot\0" \ + "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \ + "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \ + "ubpart=0:1\0" \ + "ubfile="UBFILE"\0" \ + "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \ + "ubsaddr=fff00000\0" \ + "ubeaddr=fff2ffff\0" \ + "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \ + "upgrade=run ubload ubflash\0" + +/*----------------------------------------------------------------------- + * PCI stuff + */ +#define CONFIG_PCI +#undef CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW + +#ifndef CONFIG_PCI_PNP +/* Keep the following defines in sync with the BAT mappings */ + +#define PCI_ETH_IOADDR 0xbfff00 +#define PCI_ETH_MEMADDR 0xbffffc00 +#define PCI_IDE_IOADDR 0xbffed0 +#define PCI_IDE_MEMADDR 0xbffffb00 +#define PCI_USB0_IOADDR 0 +#define PCI_USB0_MEMADDR 0xbfffe000 +#define PCI_USB1_IOADDR 0 +#define PCI_USB1_MEMADDR 0xbfffd000 +#define PCI_USB2_IOADDR 0 +#define PCI_USB2_MEMADDR 0xbfffcf00 + +#endif + +/*----------------------------------------------------------------------- + * Ethernet stuff + */ +#define CONFIG_NET_MULTI + +#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) +#define CONFIG_TULIP +#define CONFIG_TULIP_USE_IO +#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) +#define CONFIG_RTL8169 +#endif + +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_NETCONSOLE + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_BASE TEXT_BASE + +#define CFG_RESET_ADDRESS 0xFFF00100 +#define CFG_EUMB_ADDR 0x80000000 +#define CFG_PCI_MEM_ADDR 0xB0000000 +#define CFG_MISC_REGION_ADDR 0xFE000000 + +#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ + +/* Maximum amount of RAM */ +#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) +#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ +#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) +#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ +#else +#error Unknown LinkStation type +#endif + +/*----------------------------------------------------------------------- + * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build + * + * RAM based builds are for testing purposes. A Linux module, uloader.o, + * exists to load U-Boot and pass control to it + * + * Always do "make clean" after changing the build type + */ +#if CFG_MONITOR_BASE < CFG_FLASH_BASE +#define CFG_RAMBOOT +#endif + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area + */ +#if 1 /* RAM is available when the first C function is called */ +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE - 0x1000) +#else +#define CFG_INIT_RAM_ADDR 0x40000000 +#endif +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +/*---------------------------------------------------------------------- + * Serial configuration + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL + +#define CFG_NS16550_REG_SIZE 1 + +#define CFG_NS16550_CLK get_bus_freq(0) + +#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4600) /* Console port */ +#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4500) /* AVR port */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + * For the detail description refer to the MPC8245 user's manual. + * + * Unless indicated otherwise, the values are + * taken from the orignal Linkstation boot code + * + * Most of the low level configuration setttings are normally used + * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation. + * Low level initialisation is done in board/linkstation/early_init.S + * The values below are included for reference purpose only + */ + +/* FIXME: 32.768 MHz is the crystal frequency but */ +/* the real frequency is lower by about 0.75% */ +#define CONFIG_SYS_CLK_FREQ 32768000 +#define CFG_HZ 1000 + +/* Bit-field values for MCCR1. */ +#define CFG_ROMNAL 0 +#define CFG_ROMFAL 11 + +#define CFG_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ +#define CFG_BANK1_ROW 0 +#define CFG_BANK2_ROW 0 +#define CFG_BANK3_ROW 0 +#define CFG_BANK4_ROW 0 +#define CFG_BANK5_ROW 0 +#define CFG_BANK6_ROW 0 +#define CFG_BANK7_ROW 0 + +/* Bit-field values for MCCR2. */ +#define CFG_TSWAIT 0 +#define CFG_REFINT 1400 + +/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ +#define CFG_BSTOPRE 121 + +/* Bit-field values for MCCR3. */ +#define CFG_REFREC 7 + +/* Bit-field values for MCCR4. */ +#define CFG_PRETOACT 2 +#define CFG_ACTTOPRE 5 /* Original value was 2 */ +#define CFG_ACTORW 2 +#define CFG_SDMODE_CAS_LAT 2 /* For 100MHz bus. Use 3 for 133MHz */ +#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CFG_EXTROM 1 /* Original setting but there is no EXTROM */ +#define CFG_REGDIMM 0 +#define CFG_DBUS_SIZE2 1 +#define CFG_SDMODE_WRAP 0 + +#define CFG_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ +#define CFG_SDRAM_DSCD 0x30 + +/* Memory bank settings. + * Only bits 20-29 are actually used from these vales to set the + * start/end addresses. The upper two bits will always be 0, and the lower + * 20 bits will be 0x00000 for a start address, or 0xfffff for an end + * address. Refer to the MPC8240 book. + */ + +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x3ff00000 +#define CFG_BANK1_END 0x3fffffff +#define CFG_BANK1_ENABLE 0 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x3ff00000 +#define CFG_BANK4_END 0x3fffffff +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x3ff00000 +#define CFG_BANK5_END 0x3fffffff +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x3ff00000 +#define CFG_BANK6_END 0x3fffffff +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x3ff00000 +#define CFG_BANK7_END 0x3fffffff +#define CFG_BANK7_ENABLE 0 + +#define CFG_ODCR 0x95 /* 0x15 or 0x95 ? */ + +/*---------------------------------------------------------------------- + * Initial BAT mappings + */ + +/* NOTES: + * 1) GUARDED and WRITETHROUGH not allowed in IBATS + * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT + */ + +/* SDRAM */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +/* EUMB: 1MB of address space */ +#define CFG_IBAT1L (CFG_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT1U (CFG_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) + +#define CFG_DBAT1L (CFG_IBAT1L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U CFG_IBAT1U + +/* PCI Mem: 256MB of address space */ +#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT2L (CFG_IBAT2L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U CFG_IBAT2U + +/* PCI and local ROM/Flash: last 32MB of address space */ +#define CFG_IBAT3L (CFG_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (CFG_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) + +#define CFG_DBAT3L (CFG_IBAT3L | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U CFG_IBAT3U + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + * + * FIXME: This doesn't appear to be true for the newer kernels + * which map more that 8 MB + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#undef CFG_FLASH_PROTECTION +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ + +#define CFG_FLASH_ERASE_TOUT 12000 +#define CFG_FLASH_WRITE_TOUT 1000 + + +#define CFG_ENV_IS_IN_FLASH +/* + * The original LinkStation flash organisation uses + * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader + * We use the last sector of this area to store the environment + * which leaves max. 384 kB for the U-Boot itself + */ +#define CFG_ENV_ADDR 0xFFF60000 +#define CFG_ENV_SIZE 0x00010000 +#define CFG_ENV_SECT_SIZE 0x00010000 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * IDE/ATA definitions + */ +#undef CONFIG_IDE_LED /* No IDE LED */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ +#define CONFIG_LBA48 /* 48 bit LBA supported */ + +#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) +#define CFG_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ +#elif defined(CONFIG_HGTL) +#define CFG_IDE_MAXBUS 2 /* Max. 2 IDE busses */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ +#else +#error Config IDE: Unknown LinkStation type +#endif + +#define CFG_ATA_BASE_ADDR 0 + +#define CFG_ATA_DATA_OFFSET 0 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0 /* Offset for normal registers */ +#define CFG_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ + +/*----------------------------------------------------------------------- + * Partitions and file system + */ +#define CONFIG_DOS_PARTITION + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ + +/* vim: set ts=4: */ diff --git a/packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff b/packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff new file mode 100644 index 0000000000..02027b1062 --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/kurobox_powerpc-20061105_target.gitdiff @@ -0,0 +1,2286 @@ +diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
+new file mode 100644
+index 0000000..6c76ef6
+--- /dev/null
++++ b/arch/powerpc/boot/dts/kuroboxHG.dts
+@@ -0,0 +1,183 @@
++/*
++ * Device Tree Souce for Buffalo KuroboxHG
++ *
++ * Based on sandpoint.dts
++ *
++ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
++ *
++ * This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++
++XXXX add flash parts, rtc, ??
++
++build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts"
++
++
++ */
++
++/ {
++ linux,phandle = <1000>;
++ model = "KuroboxHG";
++ compatible = "linkstation";
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ cpus {
++ linux,phandle = <2000>;
++ #cpus = <1>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ PowerPC,603e { /* Really 8241 */
++ linux,phandle = <2100>;
++ linux,boot-cpu;
++ device_type = "cpu";
++ reg = <0>;
++ clock-frequency = <fdad680>; /* Fixed by bootwrapper */
++ timebase-frequency = <1F04000>; /* Fixed by bootwrapper */
++ bus-frequency = <0>; /* From bootloader */
++ /* Following required by dtc but not used */
++ i-cache-line-size = <0>;
++ d-cache-line-size = <0>;
++ i-cache-size = <4000>;
++ d-cache-size = <4000>;
++ };
++ };
++
++ memory {
++ linux,phandle = <3000>;
++ device_type = "memory";
++ reg = <00000000 08000000>;
++ };
++
++ soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
++ linux,phandle = <4000>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ #interrupt-cells = <2>;
++ device_type = "soc";
++ compatible = "mpc10x";
++ store-gathering = <0>; /* 0 == off, !0 == on */
++ reg = <80000000 00100000>;
++ ranges = <80000000 80000000 70000000 /* pci mem space */
++ fc000000 fc000000 00100000 /* EUMB */
++ fe000000 fe000000 00c00000 /* pci i/o space */
++ fec00000 fec00000 00300000 /* pci cfg regs */
++ fef00000 fef00000 00100000>; /* pci iack */
++
++ dma@80001100 {
++ linux,phandle = <4100>;
++ #interrupt-cells = <1>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ device_type = "dma";
++ compatible = "fsl-dma";
++ clock-frequency = <0>;
++ reg = <80001100 24>;
++ interrupts = <6 0>;
++ interrupt-parent = <4400>;
++ };
++
++ dma@80001200 {
++ linux,phandle = <4200>;
++ #interrupt-cells = <1>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ device_type = "dma";
++ compatible = "fsl-dma";
++ clock-frequency = <0>;
++ reg = <80001200 24>;
++ interrupts = <7 0>;
++ interrupt-parent = <4400>;
++ };
++
++ i2c@80003000 {
++ linux,phandle = <4300>;
++ device_type = "i2c";
++ compatible = "fsl-i2c";
++ clock-frequency = <0>;
++ reg = <80003000 1000>;
++ interrupts = <5 2>;
++ interrupt-parent = <4400>;
++ };
++
++ serial@80004500 {
++ linux,phandle = <4511>;
++ device_type = "serial";
++ compatible = "ns16550";
++ reg = <80004500 8>;
++ clock-frequency = <7c044a8>;
++ current-speed = <2580>;
++ interrupts = <9 2>;
++ interrupt-parent = <4400>;
++ };
++
++ serial@80004600 {
++ linux,phandle = <4512>;
++ device_type = "serial";
++ compatible = "ns16550";
++ reg = <80004600 8>;
++ clock-frequency = <7c044a8>;
++ current-speed = <e100>;
++ interrupts = <a 0>;
++ interrupt-parent = <4400>;
++ };
++
++ pic@80040000 {
++ linux,phandle = <4400>;
++ #interrupt-cells = <2>;
++ #address-cells = <0>;
++ device_type = "open-pic";
++ compatible = "chrp,open-pic";
++ interrupt-controller;
++ reg = <80040000 40000>;
++ clock-frequency = <0>; /* ??? */
++ built-in;
++ };
++
++ pci@fec00000 {
++ linux,phandle = <4500>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ device_type = "pci";
++ compatible = "mpc10x-pci";
++ reg = <fec00000 400000>;
++ ranges = <01000000 0 0 fe000000 0 00c00000
++ 02000000 0 80000000 80000000 0 70000000>;
++ bus-range = <0 ff>;
++ clock-frequency = <7f28155>;
++ interrupt-parent = <4400>;
++ interrupt-map-mask = <f800 0 0 7>;
++ interrupt-map = <
++ /* IDSEL 0x11 - IRQ0 ETH */
++ 5800 0 0 1 4400 0 1
++ 5800 0 0 2 4400 1 1
++ 5800 0 0 3 4400 2 1
++ 5800 0 0 4 4400 3 1
++ /* IDSEL 0x12 - IRQ1 IDE0 */
++ 6000 0 0 1 4400 1 1
++ 6000 0 0 2 4400 2 1
++ 6000 0 0 3 4400 3 1
++ 6000 0 0 4 4400 0 1
++ /* IDSEL 0x13 - IRQ4 IDE1 */
++ 6800 0 0 1 4400 3 1
++ 6800 0 0 2 4400 0 1
++ 6800 0 0 3 4400 1 1
++ 6800 0 0 4 4400 2 1
++ /* IDSEL 0x14 - IRQ3 USB2.0 */
++ 7000 0 0 1 4400 3 1
++ 7000 0 0 2 4400 3 1
++ 7000 0 0 3 4400 3 1
++ 7000 0 0 4 4400 3 1
++ /* IDSEL 0x15 - IRQ2 fan ctrl*/
++ 7800 0 0 1 4400 2 1
++ 7800 0 0 2 4400 3 1
++ 7800 0 0 3 4400 0 1
++ 7800 0 0 4 4400 1 1
++ >;
++ };
++ };
++};
+diff --git a/arch/powerpc/configs/kuroboxhg_defconfig b/arch/powerpc/configs/kuroboxhg_defconfig
+new file mode 100644
+index 0000000..136632f
+--- /dev/null
++++ b/arch/powerpc/configs/kuroboxhg_defconfig
+@@ -0,0 +1,1577 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.19-rc2
++# Wed Nov 1 16:56:07 2006
++#
++# CONFIG_PPC64 is not set
++CONFIG_PPC32=y
++CONFIG_PPC_MERGE=y
++CONFIG_MMU=y
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_IRQ_PER_CPU=y
++CONFIG_RWSEM_XCHGADD_ALGORITHM=y
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_FIND_NEXT_BIT=y
++CONFIG_PPC=y
++CONFIG_EARLY_PRINTK=y
++CONFIG_GENERIC_NVRAM=y
++CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
++CONFIG_ARCH_MAY_HAVE_PC_FDC=y
++CONFIG_PPC_OF=y
++CONFIG_PPC_UDBG_16550=y
++# CONFIG_GENERIC_TBSYNC is not set
++CONFIG_AUDIT_ARCH=y
++# CONFIG_DEFAULT_UIMAGE is not set
++
++#
++# Processor support
++#
++CONFIG_CLASSIC32=y
++# CONFIG_PPC_52xx is not set
++# CONFIG_PPC_82xx is not set
++# CONFIG_PPC_83xx is not set
++# CONFIG_PPC_85xx is not set
++# CONFIG_PPC_86xx is not set
++# CONFIG_40x is not set
++# CONFIG_44x is not set
++# CONFIG_8xx is not set
++# CONFIG_E200 is not set
++CONFIG_6xx=y
++CONFIG_PPC_FPU=y
++# CONFIG_ALTIVEC is not set
++CONFIG_PPC_STD_MMU=y
++CONFIG_PPC_STD_MMU_32=y
++# CONFIG_SMP is not set
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# Code maturity level options
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++
++#
++# General setup
++#
++CONFIG_LOCALVERSION="-kuroboxHG"
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++# CONFIG_IPC_NS is not set
++CONFIG_POSIX_MQUEUE=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_UTS_NS is not set
++# CONFIG_AUDIT is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++# CONFIG_RELAY is not set
++CONFIG_INITRAMFS_SOURCE=""
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++# CONFIG_EMBEDDED is not set
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SHMEM=y
++CONFIG_SLAB=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_RT_MUTEXES=y
++# CONFIG_TINY_SHMEM is not set
++CONFIG_BASE_SMALL=0
++# CONFIG_SLOB is not set
++
++#
++# Loadable module support
++#
++CONFIG_MODULES=y
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++# CONFIG_MODVERSIONS is not set
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_KMOD=y
++
++#
++# Block layer
++#
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_LSF is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++
++#
++# Platform support
++#
++# CONFIG_PPC_MULTIPLATFORM is not set
++CONFIG_EMBEDDED6xx=y
++# CONFIG_APUS is not set
++# CONFIG_PPC_CELL is not set
++# CONFIG_PPC_CELL_NATIVE is not set
++# CONFIG_PPC_RTAS is not set
++# CONFIG_MMIO_NVRAM is not set
++# CONFIG_PPC_MPC106 is not set
++# CONFIG_PPC_970_NAP is not set
++# CONFIG_CPU_FREQ is not set
++# CONFIG_TAU is not set
++# CONFIG_KATANA is not set
++# CONFIG_WILLOW is not set
++# CONFIG_CPCI690 is not set
++# CONFIG_POWERPMC250 is not set
++# CONFIG_CHESTNUT is not set
++# CONFIG_SPRUCE is not set
++# CONFIG_HDPU is not set
++# CONFIG_EV64260 is not set
++# CONFIG_LOPEC is not set
++# CONFIG_MVME5100 is not set
++# CONFIG_PPLUS is not set
++# CONFIG_PRPMC750 is not set
++# CONFIG_PRPMC800 is not set
++# CONFIG_SANDPOINT is not set
++CONFIG_LINKSTATION=y
++# CONFIG_MPC7448HPC2 is not set
++# CONFIG_RADSTONE_PPC7D is not set
++# CONFIG_PAL4 is not set
++# CONFIG_GEMINI is not set
++# CONFIG_EST8260 is not set
++# CONFIG_SBC82xx is not set
++# CONFIG_SBS8260 is not set
++# CONFIG_RPX8260 is not set
++# CONFIG_TQM8260 is not set
++# CONFIG_ADS8272 is not set
++# CONFIG_PQ2FADS is not set
++# CONFIG_LITE5200 is not set
++# CONFIG_EV64360 is not set
++CONFIG_PPC_GEN550=y
++CONFIG_MPC10X_BRIDGE=y
++CONFIG_MPC10X_OPENPIC=y
++# CONFIG_MPC10X_STORE_GATHERING is not set
++# CONFIG_WANT_EARLY_SERIAL is not set
++CONFIG_MPIC=y
++
++#
++# Kernel options
++#
++# CONFIG_HIGHMEM is not set
++CONFIG_HZ_100=y
++# CONFIG_HZ_250 is not set
++# CONFIG_HZ_1000 is not set
++CONFIG_HZ=100
++CONFIG_PREEMPT_NONE=y
++# CONFIG_PREEMPT_VOLUNTARY is not set
++# CONFIG_PREEMPT is not set
++CONFIG_BINFMT_ELF=y
++# CONFIG_BINFMT_MISC is not set
++CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
++CONFIG_ARCH_FLATMEM_ENABLE=y
++CONFIG_ARCH_POPULATES_NODE_MAP=y
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++# CONFIG_SPARSEMEM_STATIC is not set
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_RESOURCES_64BIT is not set
++CONFIG_PROC_DEVICETREE=y
++CONFIG_CMDLINE_BOOL=y
++CONFIG_CMDLINE="console=ttyS1,57600 root=/dev/sdd1 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32"
++# CONFIG_PM is not set
++# CONFIG_SECCOMP is not set
++CONFIG_ISA_DMA_API=y
++
++#
++# Bus options
++#
++CONFIG_GENERIC_ISA_DMA=y
++# CONFIG_MPIC_WEIRD is not set
++# CONFIG_PPC_I8259 is not set
++CONFIG_PPC_INDIRECT_PCI=y
++CONFIG_FSL_SOC=y
++CONFIG_PCI=y
++CONFIG_PCI_DOMAINS=y
++# CONFIG_PCIEPORTBUS is not set
++# CONFIG_PCI_MULTITHREAD_PROBE is not set
++# CONFIG_PCI_DEBUG is not set
++
++#
++# PCCARD (PCMCIA/CardBus) support
++#
++# CONFIG_PCCARD is not set
++
++#
++# PCI Hotplug Support
++#
++# CONFIG_HOTPLUG_PCI is not set
++
++#
++# Advanced setup
++#
++# CONFIG_ADVANCED_OPTIONS is not set
++
++#
++# Default settings for advanced configuration options are used
++#
++CONFIG_HIGHMEM_START=0xfe000000
++CONFIG_LOWMEM_SIZE=0x30000000
++CONFIG_KERNEL_START=0xc0000000
++CONFIG_TASK_SIZE=0x80000000
++CONFIG_BOOT_LOAD=0x00800000
++
++#
++# Networking
++#
++CONFIG_NET=y
++
++#
++# Networking options
++#
++# CONFIG_NETDEBUG is not set
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_IP_MROUTE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++
++#
++# IP: Virtual Server Configuration
++#
++# CONFIG_IP_VS is not set
++# CONFIG_IPV6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++# CONFIG_NETWORK_SECMARK is not set
++CONFIG_NETFILTER=y
++# CONFIG_NETFILTER_DEBUG is not set
++
++#
++# Core Netfilter Configuration
++#
++# CONFIG_NETFILTER_NETLINK is not set
++CONFIG_NETFILTER_XTABLES=m
++CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
++# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
++CONFIG_NETFILTER_XT_TARGET_MARK=m
++# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
++# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
++# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
++# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
++# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
++CONFIG_NETFILTER_XT_MATCH_ESP=m
++# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
++CONFIG_NETFILTER_XT_MATCH_LENGTH=m
++CONFIG_NETFILTER_XT_MATCH_LIMIT=m
++CONFIG_NETFILTER_XT_MATCH_MAC=m
++CONFIG_NETFILTER_XT_MATCH_MARK=m
++# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
++CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
++# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
++# CONFIG_NETFILTER_XT_MATCH_REALM is not set
++# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
++CONFIG_NETFILTER_XT_MATCH_STATE=m
++# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
++# CONFIG_NETFILTER_XT_MATCH_STRING is not set
++# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
++
++#
++# IP: Netfilter Configuration
++#
++CONFIG_IP_NF_CONNTRACK=m
++# CONFIG_IP_NF_CT_ACCT is not set
++# CONFIG_IP_NF_CONNTRACK_MARK is not set
++# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
++# CONFIG_IP_NF_CT_PROTO_SCTP is not set
++CONFIG_IP_NF_FTP=m
++CONFIG_IP_NF_IRC=m
++# CONFIG_IP_NF_NETBIOS_NS is not set
++CONFIG_IP_NF_TFTP=m
++# CONFIG_IP_NF_AMANDA is not set
++# CONFIG_IP_NF_PPTP is not set
++# CONFIG_IP_NF_H323 is not set
++# CONFIG_IP_NF_SIP is not set
++# CONFIG_IP_NF_QUEUE is not set
++CONFIG_IP_NF_IPTABLES=m
++CONFIG_IP_NF_MATCH_IPRANGE=m
++# CONFIG_IP_NF_MATCH_TOS is not set
++# CONFIG_IP_NF_MATCH_RECENT is not set
++# CONFIG_IP_NF_MATCH_ECN is not set
++# CONFIG_IP_NF_MATCH_AH is not set
++# CONFIG_IP_NF_MATCH_TTL is not set
++# CONFIG_IP_NF_MATCH_OWNER is not set
++# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
++# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
++CONFIG_IP_NF_FILTER=m
++CONFIG_IP_NF_TARGET_REJECT=m
++# CONFIG_IP_NF_TARGET_LOG is not set
++# CONFIG_IP_NF_TARGET_ULOG is not set
++# CONFIG_IP_NF_TARGET_TCPMSS is not set
++CONFIG_IP_NF_NAT=m
++CONFIG_IP_NF_NAT_NEEDED=y
++CONFIG_IP_NF_TARGET_MASQUERADE=m
++CONFIG_IP_NF_TARGET_REDIRECT=m
++CONFIG_IP_NF_TARGET_NETMAP=m
++CONFIG_IP_NF_TARGET_SAME=m
++# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
++CONFIG_IP_NF_NAT_IRC=m
++CONFIG_IP_NF_NAT_FTP=m
++CONFIG_IP_NF_NAT_TFTP=m
++CONFIG_IP_NF_MANGLE=m
++CONFIG_IP_NF_TARGET_TOS=m
++CONFIG_IP_NF_TARGET_ECN=m
++CONFIG_IP_NF_TARGET_TTL=m
++CONFIG_IP_NF_RAW=m
++CONFIG_IP_NF_ARPTABLES=m
++CONFIG_IP_NF_ARPFILTER=m
++CONFIG_IP_NF_ARP_MANGLE=m
++
++#
++# DCCP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_DCCP is not set
++
++#
++# SCTP Configuration (EXPERIMENTAL)
++#
++# CONFIG_IP_SCTP is not set
++
++#
++# TIPC Configuration (EXPERIMENTAL)
++#
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++
++#
++# QoS and/or fair queueing
++#
++# CONFIG_NET_SCHED is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++CONFIG_IEEE80211=m
++CONFIG_IEEE80211_DEBUG=y
++CONFIG_IEEE80211_CRYPT_WEP=m
++CONFIG_IEEE80211_CRYPT_CCMP=m
++CONFIG_IEEE80211_CRYPT_TKIP=m
++CONFIG_IEEE80211_SOFTMAC=m
++CONFIG_IEEE80211_SOFTMAC_DEBUG=y
++CONFIG_WIRELESS_EXT=y
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=m
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_SYS_HYPERVISOR is not set
++
++#
++# Connector - unified userspace <-> kernelspace linker
++#
++# CONFIG_CONNECTOR is not set
++
++#
++# Memory Technology Devices (MTD)
++#
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++CONFIG_MTD_JEDECPROBE=y
++CONFIG_MTD_GEN_PROBE=y
++CONFIG_MTD_CFI_ADV_OPTIONS=y
++CONFIG_MTD_CFI_NOSWAP=y
++# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
++# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
++CONFIG_MTD_CFI_GEOMETRY=y
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++# CONFIG_MTD_CFI_I2 is not set
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_OTP is not set
++# CONFIG_MTD_CFI_INTELEXT is not set
++CONFIG_MTD_CFI_AMDSTD=y
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++# CONFIG_MTD_OBSOLETE_CHIPS is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++CONFIG_MTD_PHYSMAP=y
++CONFIG_MTD_PHYSMAP_START=0xffc00000
++CONFIG_MTD_PHYSMAP_LEN=0x400000
++CONFIG_MTD_PHYSMAP_BANKWIDTH=1
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_PMC551 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++
++#
++# NAND Flash Device Drivers
++#
++# CONFIG_MTD_NAND is not set
++
++#
++# OneNAND Flash Device Drivers
++#
++# CONFIG_MTD_ONENAND is not set
++
++#
++# Parallel port support
++#
++# CONFIG_PARPORT is not set
++
++#
++# Plug and Play support
++#
++
++#
++# Block devices
++#
++# CONFIG_BLK_DEV_FD is not set
++# CONFIG_BLK_CPQ_DA is not set
++# CONFIG_BLK_CPQ_CISS_DA is not set
++# CONFIG_BLK_DEV_DAC960 is not set
++# CONFIG_BLK_DEV_UMEM is not set
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_SX8 is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=2
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++
++#
++# ATA/ATAPI/MFM/RLL support
++#
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=y
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++
++#
++# SCSI low-level drivers
++#
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
++# CONFIG_SCSI_3W_9XXX is not set
++# CONFIG_SCSI_ACARD is not set
++# CONFIG_SCSI_AACRAID is not set
++# CONFIG_SCSI_AIC7XXX is not set
++# CONFIG_SCSI_AIC7XXX_OLD is not set
++# CONFIG_SCSI_AIC79XX is not set
++# CONFIG_SCSI_AIC94XX is not set
++# CONFIG_SCSI_DPT_I2O is not set
++# CONFIG_SCSI_ARCMSR is not set
++# CONFIG_MEGARAID_NEWGEN is not set
++# CONFIG_MEGARAID_LEGACY is not set
++# CONFIG_MEGARAID_SAS is not set
++# CONFIG_SCSI_HPTIOP is not set
++# CONFIG_SCSI_BUSLOGIC is not set
++# CONFIG_SCSI_DMX3191D is not set
++# CONFIG_SCSI_EATA is not set
++# CONFIG_SCSI_FUTURE_DOMAIN is not set
++# CONFIG_SCSI_GDTH is not set
++# CONFIG_SCSI_IPS is not set
++# CONFIG_SCSI_INITIO is not set
++# CONFIG_SCSI_INIA100 is not set
++# CONFIG_SCSI_STEX is not set
++# CONFIG_SCSI_SYM53C8XX_2 is not set
++# CONFIG_SCSI_IPR is not set
++# CONFIG_SCSI_QLOGIC_1280 is not set
++# CONFIG_SCSI_QLA_FC is not set
++# CONFIG_SCSI_QLA_ISCSI is not set
++# CONFIG_SCSI_LPFC is not set
++# CONFIG_SCSI_DC395x is not set
++# CONFIG_SCSI_DC390T is not set
++# CONFIG_SCSI_NSP32 is not set
++# CONFIG_SCSI_DEBUG is not set
++
++#
++# Serial ATA (prod) and Parallel ATA (experimental) drivers
++#
++CONFIG_ATA=y
++# CONFIG_SATA_AHCI is not set
++# CONFIG_SATA_SVW is not set
++# CONFIG_ATA_PIIX is not set
++# CONFIG_SATA_MV is not set
++# CONFIG_SATA_NV is not set
++# CONFIG_PDC_ADMA is not set
++# CONFIG_SATA_QSTOR is not set
++# CONFIG_SATA_PROMISE is not set
++# CONFIG_SATA_SX4 is not set
++# CONFIG_SATA_SIL is not set
++# CONFIG_SATA_SIL24 is not set
++# CONFIG_SATA_SIS is not set
++# CONFIG_SATA_ULI is not set
++# CONFIG_SATA_VIA is not set
++# CONFIG_SATA_VITESSE is not set
++# CONFIG_PATA_ALI is not set
++# CONFIG_PATA_AMD is not set
++# CONFIG_PATA_ARTOP is not set
++# CONFIG_PATA_ATIIXP is not set
++# CONFIG_PATA_CMD64X is not set
++# CONFIG_PATA_CS5520 is not set
++# CONFIG_PATA_CS5530 is not set
++# CONFIG_PATA_CYPRESS is not set
++# CONFIG_PATA_EFAR is not set
++# CONFIG_ATA_GENERIC is not set
++# CONFIG_PATA_HPT366 is not set
++# CONFIG_PATA_HPT37X is not set
++# CONFIG_PATA_HPT3X2N is not set
++# CONFIG_PATA_HPT3X3 is not set
++# CONFIG_PATA_IT821X is not set
++# CONFIG_PATA_JMICRON is not set
++# CONFIG_PATA_TRIFLEX is not set
++# CONFIG_PATA_MPIIX is not set
++# CONFIG_PATA_OLDPIIX is not set
++# CONFIG_PATA_NETCELL is not set
++# CONFIG_PATA_NS87410 is not set
++# CONFIG_PATA_OPTI is not set
++# CONFIG_PATA_OPTIDMA is not set
++# CONFIG_PATA_PDC_OLD is not set
++# CONFIG_PATA_RADISYS is not set
++# CONFIG_PATA_RZ1000 is not set
++# CONFIG_PATA_SC1200 is not set
++# CONFIG_PATA_SERVERWORKS is not set
++# CONFIG_PATA_PDC2027X is not set
++CONFIG_PATA_SIL680=y
++# CONFIG_PATA_SIS is not set
++# CONFIG_PATA_VIA is not set
++# CONFIG_PATA_WINBOND is not set
++
++#
++# Multi-device support (RAID and LVM)
++#
++# CONFIG_MD is not set
++
++#
++# Fusion MPT device support
++#
++# CONFIG_FUSION is not set
++# CONFIG_FUSION_SPI is not set
++# CONFIG_FUSION_FC is not set
++# CONFIG_FUSION_SAS is not set
++
++#
++# IEEE 1394 (FireWire) support
++#
++# CONFIG_IEEE1394 is not set
++
++#
++# I2O device support
++#
++# CONFIG_I2O is not set
++
++#
++# Macintosh device drivers
++#
++# CONFIG_WINDFARM is not set
++
++#
++# Network device support
++#
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++
++#
++# ARCnet devices
++#
++# CONFIG_ARCNET is not set
++
++#
++# PHY device support
++#
++
++#
++# Ethernet (10 or 100Mbit)
++#
++# CONFIG_NET_ETHERNET is not set
++
++#
++# Ethernet (1000 Mbit)
++#
++# CONFIG_ACENIC is not set
++# CONFIG_DL2K is not set
++# CONFIG_E1000 is not set
++# CONFIG_NS83820 is not set
++# CONFIG_HAMACHI is not set
++# CONFIG_YELLOWFIN is not set
++CONFIG_R8169=y
++# CONFIG_R8169_NAPI is not set
++# CONFIG_SIS190 is not set
++# CONFIG_SKGE is not set
++# CONFIG_SKY2 is not set
++# CONFIG_SK98LIN is not set
++# CONFIG_TIGON3 is not set
++# CONFIG_BNX2 is not set
++# CONFIG_QLA3XXX is not set
++
++#
++# Ethernet (10000 Mbit)
++#
++# CONFIG_CHELSIO_T1 is not set
++# CONFIG_IXGB is not set
++# CONFIG_S2IO is not set
++# CONFIG_MYRI10GE is not set
++
++#
++# Token Ring devices
++#
++# CONFIG_TR is not set
++
++#
++# Wireless LAN (non-hamradio)
++#
++CONFIG_NET_RADIO=y
++# CONFIG_NET_WIRELESS_RTNETLINK is not set
++
++#
++# Obsolete Wireless cards support (pre-802.11)
++#
++# CONFIG_STRIP is not set
++
++#
++# Wireless 802.11b ISA/PCI cards support
++#
++# CONFIG_IPW2100 is not set
++# CONFIG_IPW2200 is not set
++# CONFIG_AIRO is not set
++# CONFIG_HERMES is not set
++# CONFIG_ATMEL is not set
++
++#
++# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
++#
++# CONFIG_PRISM54 is not set
++# CONFIG_USB_ZD1201 is not set
++# CONFIG_HOSTAP is not set
++# CONFIG_BCM43XX is not set
++# CONFIG_ZD1211RW is not set
++CONFIG_NET_WIRELESS=y
++
++#
++# Wan interfaces
++#
++# CONFIG_WAN is not set
++# CONFIG_FDDI is not set
++# CONFIG_HIPPI is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NET_FC is not set
++# CONFIG_SHAPER is not set
++CONFIG_NETCONSOLE=y
++CONFIG_NETPOLL=y
++# CONFIG_NETPOLL_RX is not set
++# CONFIG_NETPOLL_TRAP is not set
++CONFIG_NET_POLL_CONTROLLER=y
++
++#
++# ISDN subsystem
++#
++# CONFIG_ISDN is not set
++
++#
++# Telephony Support
++#
++# CONFIG_PHONE is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_TSDEV is not set
++CONFIG_INPUT_EVDEV=m
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++CONFIG_INPUT_MISC=y
++CONFIG_INPUT_UINPUT=m
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++# CONFIG_SERIO_I8042 is not set
++CONFIG_SERIO_SERPORT=y
++# CONFIG_SERIO_PCIPS2 is not set
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_PCI=y
++CONFIG_SERIAL_8250_NR_UARTS=4
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++# CONFIG_SERIAL_8250_EXTENDED is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++# CONFIG_SERIAL_JSM is not set
++CONFIG_UNIX98_PTYS=y
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=256
++
++#
++# IPMI
++#
++# CONFIG_IPMI_HANDLER is not set
++
++#
++# Watchdog Cards
++#
++# CONFIG_WATCHDOG is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_NVRAM is not set
++# CONFIG_GEN_RTC is not set
++# CONFIG_DTLK is not set
++# CONFIG_R3964 is not set
++# CONFIG_APPLICOM is not set
++
++#
++# Ftape, the floppy tape device driver
++#
++# CONFIG_AGP is not set
++# CONFIG_DRM is not set
++# CONFIG_RAW_DRIVER is not set
++
++#
++# TPM devices
++#
++# CONFIG_TCG_TPM is not set
++# CONFIG_TELCLOCK is not set
++
++#
++# I2C support
++#
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++
++#
++# I2C Algorithms
++#
++# CONFIG_I2C_ALGOBIT is not set
++# CONFIG_I2C_ALGOPCF is not set
++# CONFIG_I2C_ALGOPCA is not set
++
++#
++# I2C Hardware Bus support
++#
++# CONFIG_I2C_ALI1535 is not set
++# CONFIG_I2C_ALI1563 is not set
++# CONFIG_I2C_ALI15X3 is not set
++# CONFIG_I2C_AMD756 is not set
++# CONFIG_I2C_AMD8111 is not set
++# CONFIG_I2C_I801 is not set
++# CONFIG_I2C_I810 is not set
++# CONFIG_I2C_PIIX4 is not set
++CONFIG_I2C_MPC=y
++# CONFIG_I2C_NFORCE2 is not set
++# CONFIG_I2C_OCORES is not set
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_PROSAVAGE is not set
++# CONFIG_I2C_SAVAGE4 is not set
++# CONFIG_I2C_SIS5595 is not set
++# CONFIG_I2C_SIS630 is not set
++# CONFIG_I2C_SIS96X is not set
++# CONFIG_I2C_STUB is not set
++# CONFIG_I2C_VIA is not set
++# CONFIG_I2C_VIAPRO is not set
++# CONFIG_I2C_VOODOO3 is not set
++# CONFIG_I2C_PCA_ISA is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_SENSORS_DS1337 is not set
++# CONFIG_SENSORS_DS1374 is not set
++CONFIG_SENSORS_EEPROM=m
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_SENSORS_M41T00 is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++
++#
++# SPI support
++#
++# CONFIG_SPI is not set
++# CONFIG_SPI_MASTER is not set
++
++#
++# Dallas's 1-wire bus
++#
++
++#
++# Hardware Monitoring support
++#
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_ABITUGURU is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ASB100 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_FSCHER is not set
++# CONFIG_SENSORS_FSCPOS is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_SIS5595 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_VIA686A is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_VT8231 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_HWMON_DEBUG_CHIP is not set
++
++#
++# Misc devices
++#
++# CONFIG_TIFM_CORE is not set
++
++#
++# Multimedia devices
++#
++# CONFIG_VIDEO_DEV is not set
++
++#
++# Digital Video Broadcasting Devices
++#
++# CONFIG_DVB is not set
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++CONFIG_FIRMWARE_EDID=y
++# CONFIG_FB is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Sound
++#
++# CONFIG_SOUND is not set
++
++#
++# USB support
++#
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++# CONFIG_USB_DEBUG is not set
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_BANDWIDTH is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++# CONFIG_USB_OTG is not set
++
++#
++# USB Host Controller Drivers
++#
++CONFIG_USB_EHCI_HCD=y
++# CONFIG_USB_EHCI_SPLIT_ISO is not set
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_ISP116X_HCD is not set
++CONFIG_USB_OHCI_HCD=y
++# CONFIG_USB_OHCI_BIG_ENDIAN is not set
++CONFIG_USB_OHCI_LITTLE_ENDIAN=y
++# CONFIG_USB_UHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++
++#
++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
++#
++
++#
++# may also be needed; see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=m
++# CONFIG_USB_STORAGE_DEBUG is not set
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_DPCM is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Input Devices
++#
++# CONFIG_USB_HID is not set
++
++#
++# USB HID Boot Protocol drivers
++#
++# CONFIG_USB_KBD is not set
++# CONFIG_USB_MOUSE is not set
++# CONFIG_USB_AIPTEK is not set
++# CONFIG_USB_WACOM is not set
++# CONFIG_USB_ACECAD is not set
++# CONFIG_USB_KBTAB is not set
++# CONFIG_USB_POWERMATE is not set
++# CONFIG_USB_TOUCHSCREEN is not set
++# CONFIG_USB_YEALINK is not set
++# CONFIG_USB_XPAD is not set
++# CONFIG_USB_ATI_REMOTE is not set
++# CONFIG_USB_ATI_REMOTE2 is not set
++# CONFIG_USB_KEYSPAN_REMOTE is not set
++# CONFIG_USB_APPLETOUCH is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++CONFIG_USB_MON=y
++
++#
++# USB port drivers
++#
++
++#
++# USB Serial Converter support
++#
++CONFIG_USB_SERIAL=y
++CONFIG_USB_SERIAL_CONSOLE=y
++# CONFIG_USB_SERIAL_GENERIC is not set
++# CONFIG_USB_SERIAL_AIRCABLE is not set
++# CONFIG_USB_SERIAL_AIRPRIME is not set
++# CONFIG_USB_SERIAL_ARK3116 is not set
++# CONFIG_USB_SERIAL_BELKIN is not set
++# CONFIG_USB_SERIAL_WHITEHEAT is not set
++# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
++# CONFIG_USB_SERIAL_CP2101 is not set
++# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
++# CONFIG_USB_SERIAL_EMPEG is not set
++CONFIG_USB_SERIAL_FTDI_SIO=y
++# CONFIG_USB_SERIAL_FUNSOFT is not set
++# CONFIG_USB_SERIAL_VISOR is not set
++# CONFIG_USB_SERIAL_IPAQ is not set
++# CONFIG_USB_SERIAL_IR is not set
++# CONFIG_USB_SERIAL_EDGEPORT is not set
++# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
++# CONFIG_USB_SERIAL_GARMIN is not set
++# CONFIG_USB_SERIAL_IPW is not set
++# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
++# CONFIG_USB_SERIAL_KEYSPAN is not set
++# CONFIG_USB_SERIAL_KLSI is not set
++# CONFIG_USB_SERIAL_KOBIL_SCT is not set
++# CONFIG_USB_SERIAL_MCT_U232 is not set
++# CONFIG_USB_SERIAL_MOS7840 is not set
++# CONFIG_USB_SERIAL_NAVMAN is not set
++# CONFIG_USB_SERIAL_PL2303 is not set
++# CONFIG_USB_SERIAL_HP4X is not set
++# CONFIG_USB_SERIAL_SAFE is not set
++# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
++# CONFIG_USB_SERIAL_TI is not set
++# CONFIG_USB_SERIAL_CYBERJACK is not set
++# CONFIG_USB_SERIAL_XIRCOM is not set
++# CONFIG_USB_SERIAL_OPTION is not set
++# CONFIG_USB_SERIAL_OMNINET is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_AUERSWALD is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TEST is not set
++
++#
++# USB DSL modem support
++#
++
++#
++# USB Gadget Support
++#
++# CONFIG_USB_GADGET is not set
++
++#
++# MMC/SD Card support
++#
++# CONFIG_MMC is not set
++
++#
++# LED devices
++#
++# CONFIG_NEW_LEDS is not set
++
++#
++# LED drivers
++#
++
++#
++# LED Triggers
++#
++
++#
++# InfiniBand support
++#
++# CONFIG_INFINIBAND is not set
++
++#
++# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
++#
++
++#
++# Real Time Clock
++#
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++
++#
++# RTC drivers
++#
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++CONFIG_RTC_DRV_RS5C372=y
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_TEST is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# DMA Engine support
++#
++# CONFIG_DMA_ENGINE is not set
++
++#
++# DMA Clients
++#
++
++#
++# DMA Devices
++#
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4DEV_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++CONFIG_FS_MBCACHE=y
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_ROMFS_FS is not set
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++CONFIG_DNOTIFY=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_ZISOFS_FS=m
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++# CONFIG_NTFS_RW is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_KCORE=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_RAMFS=y
++# CONFIG_CONFIGFS_FS is not set
++
++#
++# Miscellaneous filesystems
++#
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++# CONFIG_JFFS_FS is not set
++# CONFIG_JFFS2_FS is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++
++#
++# Network File Systems
++#
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++CONFIG_NFS_V3_ACL=y
++CONFIG_NFS_V4=y
++# CONFIG_NFS_DIRECTIO is not set
++CONFIG_NFSD=m
++CONFIG_NFSD_V3=y
++# CONFIG_NFSD_V3_ACL is not set
++# CONFIG_NFSD_V4 is not set
++CONFIG_NFSD_TCP=y
++CONFIG_ROOT_NFS=y
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_ACL_SUPPORT=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++# CONFIG_9P_FS is not set
++
++#
++# Partition Types
++#
++# CONFIG_PARTITION_ADVANCED is not set
++CONFIG_MSDOS_PARTITION=y
++
++#
++# Native Language Support
++#
++CONFIG_NLS=m
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=m
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=m
++
++#
++# Library routines
++#
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++CONFIG_CRC32=y
++CONFIG_LIBCRC32C=m
++CONFIG_ZLIB_INFLATE=m
++CONFIG_ZLIB_DEFLATE=m
++CONFIG_PLIST=y
++
++#
++# Instrumentation Support
++#
++CONFIG_PROFILING=y
++CONFIG_OPROFILE=m
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_KERNEL=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_RWSEMS is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_LIST is not set
++CONFIG_FORCED_INLINING=y
++# CONFIG_HEADERS_CHECK is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_DEBUGGER is not set
++# CONFIG_BDI_SWITCH is not set
++# CONFIG_BOOTX_TEXT is not set
++# CONFIG_SERIAL_TEXT_DEBUG is not set
++# CONFIG_PPC_EARLY_DEBUG is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++
++#
++# Cryptographic options
++#
++CONFIG_CRYPTO=y
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_MANAGER=m
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_SHA1=m
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_WP512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_ECB is not set
++# CONFIG_CRYPTO_CBC is not set
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_AES=m
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++# CONFIG_CRYPTO_TEA is not set
++CONFIG_CRYPTO_ARC4=m
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_DEFLATE=m
++CONFIG_CRYPTO_MICHAEL_MIC=m
++CONFIG_CRYPTO_CRC32C=m
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Hardware crypto devices
++#
+diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
+index 234a861..c1c6748 100644
+--- a/arch/powerpc/platforms/embedded6xx/Kconfig
++++ b/arch/powerpc/platforms/embedded6xx/Kconfig
+@@ -76,6 +76,15 @@ config PRPMC800
+ Select SANDPOINT if configuring for a Motorola Sandpoint X3
+ (any flavor).
+
++config LINKSTATION
++ bool "Linkstation / Kurobox(HG) from Buffalo"
++ select MPIC
++ select FSL_SOC
++ select PPC_UDBG_16550 if SERIAL_8250
++ help
++ Select LINKSTATION if configuring for a PPC-based Linkstation
++ (LS-1) or Kurobox(HG) from Buffalo Technologies.
++
+ config MPC7448HPC2
+ bool "Freescale MPC7448HPC2(Taiga)"
+ select TSI108_BRIDGE
+@@ -210,7 +219,7 @@ config PPC_GEN550
+ depends on SANDPOINT || SPRUCE || PPLUS || \
+ PRPMC750 || PRPMC800 || LOPEC || \
+ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
+- 83xx
++ 83xx || LINKSTATION
+ default y
+
+ config FORCE
+@@ -284,13 +293,13 @@ config HARRIER
+
+ config MPC10X_BRIDGE
+ bool
+- depends on POWERPMC250 || LOPEC || SANDPOINT
++ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ select PPC_INDIRECT_PCI
+ default y
+
+ config MPC10X_OPENPIC
+ bool
+- depends on POWERPMC250 || LOPEC || SANDPOINT
++ depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ default y
+
+ config MPC10X_STORE_GATHERING
+diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
+index fa499fe..1f3edc7 100644
+--- a/arch/powerpc/platforms/embedded6xx/Makefile
++++ b/arch/powerpc/platforms/embedded6xx/Makefile
+@@ -3,3 +3,4 @@ #
+ #
+ obj-$(CONFIG_MPC7448HPC2) += mpc7448_hpc2.o
+ obj-$(CONFIG_SANDPOINT) += sandpoint.o
++obj-$(CONFIG_LINKSTATION) += linkstation.o ls_uart.o
+diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
+new file mode 100644
+index 0000000..30bcb5b
+--- /dev/null
++++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
+@@ -0,0 +1,254 @@
++/*
++ * arch/powerpc/platforms/embedded6xx/linkstation.c
++ *
++ * Board setup routines for the Buffalo Linkstation / Kurobox Platform.
++ *
++ * Author: Mark A. Greer
++ * mgreer@mvista.com
++ *
++ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under
++ * the terms of the GNU General Public License version 2. This program
++ * is licensed "as is" without any warranty of any kind, whether express
++ * or implied.
++ */
++
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/reboot.h>
++#include <linux/pci.h>
++#include <linux/kdev_t.h>
++#include <linux/major.h>
++#include <linux/initrd.h>
++#include <linux/console.h>
++#include <linux/delay.h>
++#include <linux/ide.h>
++#include <linux/seq_file.h>
++#include <linux/root_dev.h>
++#include <linux/serial.h>
++#include <linux/tty.h> /* for linux/serial_core.h */
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <linux/serial_8250.h>
++#include <linux/mtd/physmap.h>
++
++#include <asm/system.h>
++#include <asm/pgtable.h>
++#include <asm/page.h>
++#include <asm/time.h>
++#include <asm/dma.h>
++#include <asm/io.h>
++#include <asm/machdep.h>
++#include <asm/prom.h>
++#include <asm/smp.h>
++#include <asm/vga.h>
++#include <asm/i8259.h>
++#include <asm/mpic.h>
++#include <asm/todc.h>
++#include <asm/bootinfo.h>
++#include <asm/mpc10x.h>
++#include <asm/pci-bridge.h>
++#include <asm/ppc_sys.h>
++
++static struct mtd_partition linkstation_physmap_partitions[] = {
++ {
++ .name = "mtd_firmimg",
++ .offset = 0x000000,
++ .size = 0x300000,
++ },
++ {
++ .name = "mtd_bootcode",
++ .offset = 0x300000,
++ .size = 0x70000,
++ },
++ {
++ .name = "mtd_status",
++ .offset = 0x370000,
++ .size = 0x10000,
++ },
++ {
++ .name = "mtd_conf",
++ .offset = 0x380000,
++ .size = 0x80000,
++ },
++ {
++ .name = "mtd_allflash",
++ .offset = 0x000000,
++ .size = 0x400000,
++ },
++ {
++ .name = "mtd_data",
++ .offset = 0x310000,
++ .size = 0xf0000,
++ },
++};
++
++/*
++ * Buffalo linkstation interrupt routing.
++ */
++
++void __init linkstation_pcibios_fixup(void)
++{
++ struct pci_dev *dev = NULL;
++
++ for_each_pci_dev(dev)
++ pci_read_irq_line(dev);
++}
++
++static int __init add_bridge(struct device_node *dev)
++{
++ int len;
++ struct pci_controller *hose;
++ int *bus_range;
++
++ printk("Adding PCI host bridge %s\n", dev->full_name);
++
++ bus_range = (int *) get_property(dev, "bus-range", &len);
++ if (bus_range == NULL || len < 2 * sizeof(int))
++ printk(KERN_WARNING "Can't get bus-range for %s, assume"
++ " bus 0\n", dev->full_name);
++
++ hose = pcibios_alloc_controller();
++ if (hose == NULL)
++ return -ENOMEM;
++ hose->first_busno = bus_range ? bus_range[0] : 0;
++ hose->last_busno = bus_range ? bus_range[1] : 0xff;
++ hose->arch_data = dev;
++ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
++
++ /* Interpret the "ranges" property */
++ /* This also maps the I/O region and sets isa_io/mem_base */
++ pci_process_bridge_OF_ranges(hose, dev, 1);
++
++ return 0;
++}
++
++static void __init linkstation_setup_arch(void)
++{
++ struct device_node *np;
++#ifdef CONFIG_MTD_PHYSMAP
++ physmap_set_partitions(linkstation_physmap_partitions,
++ ARRAY_SIZE(linkstation_physmap_partitions));
++#endif
++
++#ifdef CONFIG_BLK_DEV_INITRD
++ if (initrd_start)
++ ROOT_DEV = Root_RAM0;
++ else
++#endif
++#ifdef CONFIG_ROOT_NFS
++ ROOT_DEV = Root_NFS;
++#else
++ ROOT_DEV = Root_HDA1;
++#endif
++
++ /* Lookup PCI host bridges */
++ for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
++ add_bridge(np);
++
++ ppc_md.pci_swizzle = common_swizzle;
++
++ printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
++ printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
++}
++
++/*
++ * Interrupt setup and service. Interrrupts on the linkstation come
++ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
++ */
++static void __init linkstation_init_IRQ(void)
++{
++ struct mpic *mpic;
++ struct device_node *dnp;
++ void *prop;
++ int size;
++ phys_addr_t paddr;
++
++ dnp = of_find_node_by_type(NULL, "open-pic");
++ if (dnp == NULL)
++ return;
++
++ prop = (struct device_node *)get_property(dnp, "reg", &size);
++ paddr = (phys_addr_t)of_translate_address(dnp, prop);
++
++ mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC ");
++ BUG_ON(mpic == NULL);
++
++ /* PCI IRQs */
++ mpic_assign_isu(mpic, 0, paddr + 0x10200);
++
++ /* I2C */
++ mpic_assign_isu(mpic, 1, paddr + 0x11000);
++
++ /* ttyS0, ttyS1 */
++ mpic_assign_isu(mpic, 2, paddr + 0x11100);
++
++ mpic_init(mpic);
++}
++
++extern void avr_uart_configure(void);
++extern void avr_uart_send(const char);
++
++static void linkstation_restart(char *cmd)
++{
++ local_irq_disable();
++
++ /* Reset system via AVR */
++ avr_uart_configure();
++ /* Send reboot command */
++ avr_uart_send('C');
++
++ for(;;) /* Spin until reset happens */
++ avr_uart_send('G'); /* "kick" */
++}
++
++static void linkstation_power_off(void)
++{
++ local_irq_disable();
++
++ avr_uart_configure();
++ /* send shutdown command */
++ avr_uart_send('E');
++
++ for(;;) /* Spin until power-off happens */
++ avr_uart_send('G'); /* "kick" */
++ /* NOTREACHED */
++}
++
++static void linkstation_halt(void)
++{
++ linkstation_power_off();
++ /* NOTREACHED */
++}
++
++static void linkstation_show_cpuinfo(struct seq_file *m)
++{
++ seq_printf(m, "vendor\t\t: Buffalo Technology\n");
++ seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n");
++}
++
++static int __init linkstation_probe(void)
++{
++ unsigned long root;
++
++ root = of_get_flat_dt_root();
++
++ if (!of_flat_dt_is_compatible(root, "linkstation"))
++ return 0;
++ return 1;
++}
++
++define_machine(linkstation){
++ .name = "Buffalo Linkstation",
++ .probe = linkstation_probe,
++ .setup_arch = linkstation_setup_arch,
++ .init_IRQ = linkstation_init_IRQ,
++ .show_cpuinfo = linkstation_show_cpuinfo,
++ .pcibios_fixup = linkstation_pcibios_fixup,
++ .get_irq = mpic_get_irq,
++ .restart = linkstation_restart,
++ .power_off = linkstation_power_off,
++ .halt = linkstation_halt,
++ .calibrate_decr = generic_calibrate_decr,
++};
+diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c
+new file mode 100644
+index 0000000..b640115
+--- /dev/null
++++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c
+@@ -0,0 +1,131 @@
++#include <linux/workqueue.h>
++#include <linux/string.h>
++#include <linux/delay.h>
++#include <linux/serial_reg.h>
++#include <linux/serial_8250.h>
++#include <asm/io.h>
++#include <asm/mpc10x.h>
++#include <asm/ppc_sys.h>
++#include <asm/prom.h>
++#include <asm/termbits.h>
++
++static void __iomem *avr_addr;
++static unsigned long avr_clock;
++
++static struct work_struct wd_work;
++
++static void wd_stop(void *unused)
++{
++ const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK";
++ int i = 0, rescue = 8;
++ int len = strlen(string);
++
++ while (rescue--) {
++ int j;
++ char lsr = in_8(avr_addr + UART_LSR);
++
++ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) {
++ for (j = 0; j < 16 && i < len; j++, i++)
++ out_8(avr_addr + UART_TX, string[i]);
++ if (i == len) {
++ /* Read "OK" back: 4ms for the last "KKKK"
++ plus a couple bytes back */
++ msleep(7);
++ printk("linkstation: disarming the AVR watchdog: ");
++ while (in_8(avr_addr + UART_LSR) & UART_LSR_DR)
++ printk("%c", in_8(avr_addr + UART_RX));
++ break;
++ }
++ }
++ msleep(17);
++ }
++ printk("\n");
++}
++
++#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600)
++
++void avr_uart_configure(void)
++{
++ unsigned char cval = UART_LCR_WLEN8;
++ unsigned int quot = AVR_QUOT(avr_clock);
++
++ if (!avr_addr || !avr_clock)
++ return;
++
++ out_8(avr_addr + UART_LCR, cval); /* initialise UART */
++ out_8(avr_addr + UART_MCR, 0);
++ out_8(avr_addr + UART_IER, 0);
++
++ cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR;
++
++ out_8(avr_addr + UART_LCR, cval); /* Set character format */
++
++ out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
++ out_8(avr_addr + UART_DLL, quot & 0xff); /* LS of divisor */
++ out_8(avr_addr + UART_DLM, quot >> 8); /* MS of divisor */
++ out_8(avr_addr + UART_LCR, cval); /* reset DLAB */
++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */
++}
++
++void avr_uart_send(const char c)
++{
++ if (!avr_addr || !avr_clock)
++ return;
++
++ out_8(avr_addr + UART_TX, c);
++ out_8(avr_addr + UART_TX, c);
++ out_8(avr_addr + UART_TX, c);
++ out_8(avr_addr + UART_TX, c);
++}
++
++static void __init ls_uart_init(void)
++{
++ local_irq_disable();
++
++#ifndef CONFIG_SERIAL_8250
++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO); /* enable FIFO */
++ out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO |
++ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); /* clear FIFOs */
++ out_8(avr_addr + UART_FCR, 0);
++ out_8(avr_addr + UART_IER, 0);
++
++ /* Clear up interrupts */
++ (void) in_8(avr_addr + UART_LSR);
++ (void) in_8(avr_addr + UART_RX);
++ (void) in_8(avr_addr + UART_IIR);
++ (void) in_8(avr_addr + UART_MSR);
++#endif
++ avr_uart_configure();
++
++ local_irq_enable();
++}
++
++static int __init ls_uarts_init(void)
++{
++ struct device_node *avr;
++ phys_addr_t phys_addr;
++ int len;
++
++ avr = of_find_node_by_path("/soc10x/serial@80004500");
++ if (!avr)
++ return -EINVAL;
++
++ avr_clock = *(u32*)get_property(avr, "clock-frequency", &len);
++ phys_addr = ((u32*)get_property(avr, "reg", &len))[0];
++
++ if (!avr_clock || !phys_addr)
++ return -EINVAL;
++
++ avr_addr = ioremap(phys_addr, 32);
++ if (!avr_addr)
++ return -EFAULT;
++
++ ls_uart_init();
++
++ INIT_WORK(&wd_work, wd_stop, NULL);
++ schedule_work(&wd_work);
++
++ return 0;
++}
++
++late_initcall(ls_uarts_init);
+diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
+index f1c7575..25cd8de 100644
+--- a/drivers/net/r8169.c
++++ b/drivers/net/r8169.c
+@@ -1396,41 +1396,6 @@ static void rtl8169_netpoll(struct net_d
+ }
+ #endif
+
+-static void __rtl8169_set_mac_addr(struct net_device *dev, void __iomem *ioaddr)
+-{
+- unsigned int i, j;
+-
+- RTL_W8(Cfg9346, Cfg9346_Unlock);
+- for (i = 0; i < 2; i++) {
+- __le32 l = 0;
+-
+- for (j = 0; j < 4; j++) {
+- l <<= 8;
+- l |= dev->dev_addr[4*i + j];
+- }
+- RTL_W32(MAC0 + 4*i, cpu_to_be32(l));
+- }
+- RTL_W8(Cfg9346, Cfg9346_Lock);
+-}
+-
+-static int rtl8169_set_mac_addr(struct net_device *dev, void *p)
+-{
+- struct rtl8169_private *tp = netdev_priv(dev);
+- struct sockaddr *addr = p;
+-
+- if (!is_valid_ether_addr(addr->sa_data))
+- return -EINVAL;
+-
+- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+-
+- if (netif_running(dev)) {
+- spin_lock_irq(&tp->lock);
+- __rtl8169_set_mac_addr(dev, tp->mmio_addr);
+- spin_unlock_irq(&tp->lock);
+- }
+- return 0;
+-}
+-
+ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
+ void __iomem *ioaddr)
+ {
+@@ -1680,7 +1645,6 @@ rtl8169_init_one(struct pci_dev *pdev, c
+ dev->stop = rtl8169_close;
+ dev->tx_timeout = rtl8169_tx_timeout;
+ dev->set_multicast_list = rtl8169_set_rx_mode;
+- dev->set_mac_address = rtl8169_set_mac_addr;
+ dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
+ dev->irq = pdev->irq;
+ dev->base_addr = (unsigned long) ioaddr;
+@@ -1928,8 +1892,6 @@ rtl8169_hw_start(struct net_device *dev)
+ /* Enable all known interrupts by setting the interrupt mask. */
+ RTL_W16(IntrMask, rtl8169_intr_mask);
+
+- __rtl8169_set_mac_addr(dev, ioaddr);
+-
+ netif_start_queue(dev);
+ }
+
diff --git a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch b/packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch new file mode 100644 index 0000000000..182c3785c7 --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/u-boot-kurobox-fdt.patch @@ -0,0 +1,29 @@ +diff -ur u-boot-86xx-kuro_clean/include/configs/linkstation.h u-boot-86xx-kuro_flash/include/configs/linkstation.h +--- u-boot-86xx-kuro_clean/include/configs/linkstation.h 2006-11-06 22:05:38.000000000 +0100 ++++ u-boot-86xx-kuro_flash/include/configs/linkstation.h 2006-10-28 11:27:42.000000000 +0200 +@@ -101,6 +101,14 @@ + CFG_CMD_EXT2 ) + #define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL + ++#define CONFIG_OF_FLAT_TREE 1 ++ ++#ifdef CONFIG_OF_FLAT_TREE ++#define OF_CPU "PowerPC,603e" ++#define OF_SOC "soc10x@80000000" ++#define OF_STDOUT_PATH "/soc10x/serial@80004600" ++#endif ++ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + #include <cmd_confdefs.h> + +@@ -151,8 +159,8 @@ + "ldaddr=800000\0" \ + "hdpart=0:1\0" \ + "hdfile=boot/vmlinux.UBoot\0" \ +- "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile}\0" \ +- "boothd=setenv bootargs root=/dev/hda1;bootm ${ldaddr}\0" \ ++ "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \ ++ "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \ + "hdboot=run hdload boothd\0" \ + "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ + "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ diff --git a/packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch b/packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch new file mode 100644 index 0000000000..79f7a8e48a --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc/u-boot-kurobox.patch @@ -0,0 +1,5595 @@ +diff -urN u-boot-86xx/MAKEALL u-boot-86xx-kuro_clean/MAKEALL +--- u-boot-86xx/MAKEALL 2006-10-13 00:27:12.000000000 +0200 ++++ u-boot-86xx-kuro_clean/MAKEALL 2006-11-06 22:13:16.000000000 +0100 +@@ -106,9 +106,9 @@ + LIST_824x=" \ + A3000 barco BMW CPC45 \ + CU824 debris eXalion HIDDEN_DRAGON \ +- MOUSSE MUSENKI MVBLUE \ +- OXC PN62 Sandpoint8240 Sandpoint8245 \ +- sbc8240 SL8245 utx8245 \ ++ linkstation linkstationhg MOUSSE MUSENKI \ ++ MVBLUE OXC PN62 Sandpoint8240 \ ++ Sandpoint8245 sbc8240 SL8245 utx8245 \ + " + + ######################################################################### +diff -urN u-boot-86xx/Makefile u-boot-86xx-kuro_clean/Makefile +--- u-boot-86xx/Makefile 2006-10-13 00:27:12.000000000 +0200 ++++ u-boot-86xx-kuro_clean/Makefile 2006-11-06 22:15:20.000000000 +0100 +@@ -122,7 +122,7 @@ + CROSS_COMPILE = + else + ifeq ($(ARCH),ppc) +-CROSS_COMPILE = powerpc-linux- ++CROSS_COMPILE = ppc_6xx- + endif + ifeq ($(ARCH),arm) + CROSS_COMPILE = arm-linux- +@@ -237,6 +237,40 @@ + + all: $(ALL) + ++LSMODEL := $(shell head -n 1 include/config.h) ++ ++linkstation_HGLAN_RAM: include/config.h ++ @[ -n "$(findstring HGLAN_RAM, $(LSMODEL))" ] || \ ++ { echo "Bad configuration: $(LSMODEL)" ; \ ++ exit 1 ; \ ++ } ++ @make all ++ @mv u-boot.bin u-boot-hg.ram.bin ++ ++linkstation_HGLAN: include/config.h ++ @[ -n "$(findstring HGLAN_ROM, $(LSMODEL))" ] || \ ++ { echo "Bad configuration: $(LSMODEL)" ; \ ++ exit 1 ; \ ++ } ++ @make all ++ @mv u-boot.bin u-boot-hg.flash.bin ++ ++linkstation_HDLAN_RAM: include/config.h ++ @[ -n "$(findstring HDLAN_RAM, $(LSMODEL))" ] || \ ++ { echo "Bad configuration: $(LSMODEL)" ; \ ++ exit 1 ; \ ++ } ++ @make all ++ @mv u-boot.bin u-boot-hd.ram.bin ++ ++linkstation_HDLAN: include/config.h ++ @[ -n "$(findstring HDLAN_ROM, $(LSMODEL))" ] || \ ++ { echo "Bad configuration: $(LSMODEL)" ; \ ++ exit 1 ; \ ++ } ++ @make all ++ @mv u-boot.bin u-boot-hd.flash.bin ++ + $(obj)u-boot.hex: $(obj)u-boot + $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ + +@@ -317,6 +351,10 @@ + + ######################################################################### + else ++linkstation_HGLAN_RAM \ ++linkstation_HGLAN \ ++linkstation_HDLAN_RAM \ ++linkstation_HDLAN \ + all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ + $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ + $(SUBDIRS) version gdbtools updater env depend \ +@@ -1262,6 +1300,38 @@ + kvme080_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin + ++linkstation_HGLAN_RAM_config: mrproper ++ @>include/config.h ; \ ++ echo "/* HGLAN_RAM */" >>include/config.h ; \ ++ echo "#define CONFIG_HGLAN 1" >>include/config.h ; \ ++ echo "TEXT_BASE = 0x07F00000" >board/linkstation/config.tmp ; \ ++ ./mkconfig -a linkstation ppc mpc824x linkstation ; \ ++ echo "LinkStation HGLAN -- RAM BUILD ..." ++ ++linkstation_HGLAN_config: mrproper ++ @>include/config.h ; \ ++ echo "/* HGLAN_ROM */" >>include/config.h ; \ ++ echo "#define CONFIG_HGLAN 1" >>include/config.h ; \ ++ echo "TEXT_BASE = 0xFFF00000" >board/linkstation/config.tmp ; \ ++ ./mkconfig -a linkstation ppc mpc824x linkstation ; \ ++ echo "LinkStation HGLAN -- ROM BUILD ..." ++ ++linkstation_HDLAN_RAM_config: mrproper ++ @>include/config.h ; \ ++ echo "/* HDLAN_RAM */" >>include/config.h ; \ ++ echo "#define CONFIG_HLAN 1" >>include/config.h ; \ ++ echo "TEXT_BASE = 0x03F00000" >board/linkstation/config.tmp ; \ ++ ./mkconfig -a linkstation ppc mpc824x linkstation ; \ ++ echo "LinkStation HDLAN -- RAM BUILD ..." ++ ++linkstation_HDLAN_config: mrproper ++ @>include/config.h ; \ ++ echo "/* HDLAN_ROM */" >>include/config.h ; \ ++ echo "#define CONFIG_HLAN 1" >>include/config.h ; \ ++ echo "TEXT_BASE = 0xFFF00000" >board/linkstation/config.tmp ; \ ++ ./mkconfig -a linkstation ppc mpc824x linkstation ; \ ++ echo "LinkStation HDLAN -- ROM BUILD ..." ++ + MOUSSE_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse + +diff -urN u-boot-86xx/board/linkstation/INSTALL u-boot-86xx-kuro_clean/board/linkstation/INSTALL +--- u-boot-86xx/board/linkstation/INSTALL 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/INSTALL 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,631 @@ ++ ++ Installing U-Boot for LinkStation ++ ++ For U-Boot port version 2.1.0 ++ 16 September 2006 ++ ++ Copyright (c) 2006 Mihai Georgian ++ ++ Permission is granted to copy, distribute and/or modify this document under ++ the terms of the [1]GNU Free Documentation License, Version 1.2 or any later ++ version published by the Free Software Foundation; with no Invariant ++ Sections, no Front-Cover Texts, and no Back-Cover Texts. The full text of ++ the license can be obtained by clicking on the above link. ++ ++ No liability for the contents of this document can be accepted. The ++ information in this document is provided in good faith but no warranty can ++ be made for its accuracy and the author does not take any responsibility. ++ Use the concepts, examples and information at your own risk. There may be ++ errors and inaccuracies, that could be damaging to your system. ++ ++ Use of a term in this document should not be regarded as affecting the ++ validity of any trademark or service mark. Naming of particular products or ++ brands should not be seen as endorsements. ++ _________________________________________________________________ ++ ++ WARNING ++ ++ Flashing the LinkStation with unauthorised firmare voids your warranty. When ++ installing firmware on an embedded computer things can and, sometimes, do go ++ wrong. The power can go down in the middle of the flash operation or the ++ flash write can fail rendering your LinkStation unusable. Please read this ++ entire page carefully before attempting to install U-Boot. ++ ++ If you are not prepared to lose your LinkStation, do not attempt to install ++ U-Boot ++ ++ Introduction ++ ++ U-Boot for the LinkStation is distributed as a source patch against ++ u-boot-1.1.4. To compile it you will need either a cross toolchain installed ++ on your PC or native development tools installed on your LinkStation. These ++ instructions assume that you are running Linux on a X86 PC and that you are ++ using a cross toolchain. ++ ++ To allow testing of U-Boot on your LinkStation without burning it into ++ flash, a kernel module named uloader.o is provided. Uloader allows you to ++ use Linux to load a RAM build of U-Boot and start it. The RAM build of ++ U-Boot is very close to the ROM build. The only differences are the absence ++ of the basic initialisation code (which cannot run from RAM) and the link ++ address. It is strongly recommended that you test U-Boot on your LinkStation ++ using a RAM build before building the ROM version and attempting to burn it ++ into flash. Once you have the RAM build up and running you can use it to ++ install (burn) the ROM version. ++ ++ Supported Hardware ++ ++ The LinkStation port of U-Boot described in this document supports the ++ following PowerPC based models: ++ 1. LinkStation version 1 (model HD-HLAN-1) ++ 2. KuroBox standard ++ 3. LinkStation HG (model HD-HGLAN) ++ 4. KuroBox HG ++ ++ This version of U-Boot will certainly not work on the the LinkStation ++ version 2 (model HD-HLAN-2) as the LinkStation version 2 is based on a MIPS ++ processor. The MIPS processor is completely different from the PowerPC ++ processor and attempting to flash a LinkStation version 2 with PowerPC ++ firmware it is guaranteed to make it completely unusable. ++ ++ Get telnet Access ++ ++ Try to connect to your LinkStation using telnet. If you see the telnet ++ command prompt, read [2]CGI Exploit (PowerPC) original method of Hacking the ++ LinkStation about how to get telnet access. ++ ++ If the above method doesn't work for you, read [3]Turn your LinkStation into ++ a Kuro Box (PowerPC) for other methods to get telnet access. ++ ++ The above methods do not work for the LinkStation HG. For this model, the ++ only solution is to load a telnet-enabled version of the firmware. Read the ++ pages about [4]OpenLink and the [5]firmware flasher ++ ++ You can also try to flash [6]a modified version of the original firmware. ++ ++ Install the Serial Console ++ ++ Installing the serial console is not an absolute requirement and it will ++ void your warranty. U-Boot can be installed and controlled without it. ++ However, the serial console will give you the best control over both U-Boot ++ and Linux. ++ ++ Read [7]Add a Serial port to the PowerPC Linkstation to learn how to install ++ the serial console. ++ ++ Install netcat (nc) ++ ++ If you haven't installed the serial console you will need to install netcat ++ (nc). Netcat is a networking utility which reads and writes data across ++ network connections, using the TCP/IP protocol. It comes standard with most ++ Linux distributions. For more information, visit the netcat home page ++ [8]http://netcat.sourceforge.net or [9]http://www.vulnwatch.org/netcat for ++ the Windows version. ++ ++ Get the ELDK ++ ++ If you don't have a cross toolchain installed, download the DENX Embedded ++ Linux Development Kit (ELDK) from ++ [10]http://ftp.sunet.se/pub/Linux/distributions/eldk/3.1.1/ppc-linux-x86/iso ++ /ppc-2005-03-07.iso, install it and spend some time getting familiar with ++ it. ++ ++ Preparation ++ ++ Create the build directory and set the environment variable UBOOT_BUILD to ++ the path to it ++ # mkdir <your_build_directory> ++ # export UBOOT_BUILD=<your_build_directory> ++ # cd $UBOOT_BUILD ++ Download the tarball for u-boot-1.1.4 from ++ [11]ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.4.tar.bz2 ++ Download the LinkStation patch, [12]u-boot-1.1.4-list-2.1.0.diff.gz ++ Download the uloader module for your LinkStation / KuroBox model. ++ * For the LinkStation 1 / KuroBox standard, download ++ [13]uloader-2.4.17.tar.gz ++ * For the LinkStation HG / KuroBox HG, download [14]uloader-2.4.20.tar.gz ++ ++ Untar u-boot-1.1.4 and apply the patch. ++ # tar xjf u-boot-1.1.4.tar.bz2 ++ # cd u-boot-1.1.4 ++ # gunzip ../u-boot-1.1.4-list-2.01.diff.gz | patch -p1 ++ ++ Untar the uloader archive for your LinkStation / KuroBox model. The archive ++ contains the source code, a binary module compiled for the original ++ LinkStation kernel and a simple bash script to load and start a RAM build of ++ U-Boot. ++ ++ The binary in uloader-2.4.17.tar.gz has been compiled against ++ 2.4.17_mvl21-sandpoint. Use only on the LinkStation 1 / KuroBox standard. ++ The binary in uloader-2.4.20.tar.gz has been compiled against ++ 2.4.20_mvl31-ppc_linkstation. Use only on the LinkStation HG / KuroBog HG. ++ If you have a different kernel version, you may need to recompile the module ++ for your kernel. Compiling the module requires a fully configured kernel ++ source tree. It is recommended to use the same gcc version as the one used ++ to compile the kernel. There is a small but important difference between the ++ two uloader source archives. The difference is the U-Boot load address. If ++ you compile uloader for the LinkStation 1 / KuroBox standard, use the ++ sources in uloader-2.4.17.tar.gz. If you compile for the LinkStation HG / ++ KuroBox HG, use the sources in uloader-2.4.20.tar.gz. In both cases you ++ need to modify the Makefile to match your development environment. ++ ++ LinkStation 1 / KuroBox standard ++ # cd .. ++ # tar xzf uloader-2.4.17.tar.gz ++ # cd u-boot-1.1.4 ++ ++ LinkStation HG / KuroBox HG ++ # cd .. ++ # tar xzf uloader-2.4.20.tar.gz ++ # cd u-boot-1.1.4 ++ ++ Source your ELDK environment ++ # . <path_to_your_ELDK>/config_6xx ++ ++ Configure ++ ++ Edit include/configs/linkstation.h and set the following variables for your ++ environment: ++ ++ CONFIG_IPADDR_LS - the IP address of your LinkStation while running ++ U-Boot (mandatory). The default address is ++ 192.168.11.150. ++ CONFIG_SERVERIP_LS - the IP address of the NFS/TFTP/DHCP/BOOTP server, ++ normally the address of your Linux PC (mandatory). ++ The default address is 192.168.11.149. ++ CONFIG_NCIP_LS - the address of the computer running netcat (nc), ++ normally the address of your Linux PC (optional). ++ If the define is missing, CONFIG_NCIP_LS will be ++ set to the same value as CONFIG_SERVERIP_LS ++ ++ RAM Build ++ ++ For LinkStation 1 / KuroBox standard run: ++ make linkstation_HDLAN_RAM_config ++ make linkstation_HDLAN_RAM ++ ++ The name of the resulting binary is u-boot-hd.ram.bin ++ ++ For LinkStation HG / KuroBox HG run: ++ make linkstation_HGLAN_RAM_config ++ make linkstation_HGLAN_RAM ++ ++ The name of the resulting binary is u-boot-hg.ram.bin ++ ++ Net Console ++ ++ The net console is the U-Boot driver which uses the UDP protocol with a ++ default port of 6666 to send the console output to and receive the console ++ input from a remote computer. You need to run netcat on the remote computer ++ to communicate with the U-Boot net console. The communication is ++ bidirectional. Netcat will display on your screen the console output ++ received from U-Boot and will send your keyboard input back to U-Boot. ++ ++ If U-Boot cannot contact the remote computer, it switches the console to the ++ serial port. To show that it changed the console, U-Boot makes the HDD LED ++ blink with the pattern corresponding to the serial console (see The Reset ++ Button below). The timeout period is 20 sec. ++ ++ Minimal Console ++ ++ U-Boot for the LinkStation is designed to allow some control over the boot ++ process even in the absence of a console. For this, it uses the power button ++ (the big button at the front) and the reset button (the small red button at ++ the back). ++ ++ Before installing U-Boot, when the LinkStation is switched on, the power LED ++ starts blinking, the original boot loader starts executing and, very ++ quickly, it starts booting the kernel from flash. If U-Boot is installed, ++ the power LED will change from blinking quickly to blinking very slowly. The ++ blink pattern is the same as the one used to indicate sleep mode in normal ++ operation. When the power LED starts blinking slowly at boot, U-Boot has ++ taken over and it is counting down the boot delay before booting the kernel. ++ The default boot delay is 10 sec. From the moment when the power LED starts ++ blinking slowly and for the duration of the boot delay, you can control the ++ boot process with the power and reset buttons. ++ ++ The Power Button ++ ++ If you push the power button and keep it pressed for more than 1 sec, the ++ boot process will stop and the LinkStation will wait for a command. A ++ stopped boot process is indicated by the power LED being lit solid. The ++ effect is the same a pressing 's' on the console. ++ ++ A long push of the power button acts as a toggle. If the boot delay count ++ down is in progress, a long push of the power button stops the boot process. ++ If the boot process is stopped (U-Boot is at the command prompt, even if you ++ can't see it), a long push of the power button restarts the boot process ++ resetting the boot delay to its original value. The restart of the boot ++ process is indicated by the power LED blinking slowly. ++ ++ By default U-Boot supports three pre-configured boot commands: ++ 1. The first boot command will attempt to load and boot a file named ++ boot/vmlinux.UBoot from the first hard disk partition, /dev/hda1. The ++ file can be in any of the U-Boot bootable formats but uImage is the ++ preferred format. If the file is missing or corrupted, U-Boot will fall ++ back to booting the original kernel from flash. ++ 2. The second boot command will boot the original kernel from flash. ++ Please note that the original kernel for the LinkStation 1 / KuroBox ++ standard has a bug in the function that calibrates the decrementer and ++ it will stop for up to 180 sec during boot. This bug is not an U-Boot ++ bug but a kernel bug which is uncovered by the fact that U-Boot ++ activates the decrementer where the original boot loader does not. ++ The original kernel for LinkStation HG / KuroBox HG does not suffer from ++ the above problem. ++ 3. The third boot command will attempt to boot in emergency mode (EM). It ++ does this by passing the argument root=/dev/ram0 to the kernel. ++ LinkStation / LinkStation HG owners should avoid booting in EM mode as ++ the root password for this mode on the LinkStation is unknown. ++ The original kernel for the LinkStation / KuroBox standard and for some ++ of the earlier LinkStation HG / KuroBox HG models ignores the root ++ argument. These models will boot normally from the on-board flash when ++ the EM boot command is used. Read the section on EM mode if your ++ LinkStation HG / KuroBox HG has a kernel that doesn't boot in EM mode ++ using this boot command. ++ ++ You can cycle through the boot commands with the power button. ++ ++ To see which of the three commands U-Boot is going to execute, press the ++ power button quickly. The HDD LED (the third from the top) will start ++ blinking. The number of times the LED blinks, shows the number of the active ++ boot command. For example, a pattern short on - short off - short on - long ++ off, means that the boot command number 2 is active. U-Boot will repeat the ++ blinking cycle for a total duration of about 5 sec counting from the moment ++ the power button is released. ++ ++ A short press of the power button while the HDD LED is blinking will advance ++ the boot command to the next one. ++ ++ Changing the boot command does not change the boot status. If the boot is ++ stopped, it will not be restarted. If the boot is in progress, it will not ++ be stopped but the boot delay will be reset to the original value. ++ ++ The Reset Button ++ ++ Two consoles are currently configured, the serial console and the net ++ console. The first console is the serial console and the second console is ++ the net console (nc). The net console is the default console. ++ ++ The reset button can be used, similarly to the power button, to switch ++ consoles. A press on the reset button (here, it doesn't matter how long you ++ keep the button pressed) displays the currently active console using the HDD ++ LED. Repeatedly pressing the reset button while the HDD LED is blinking will ++ toggle between the two consoles. The blinking pattern is different from the ++ one showing the boot command. The pattern which shows that the second (net) ++ console is active is short off - short on - short off - long on. U-Boot will ++ repeat the blinking cycle for a total duration of about 5 sec counting from ++ the moment the reset button is released. ++ ++ Load and Test ++ ++ Mount the LinkStation SMB public share and copy the following files to it: ++ ++ For LinkStation 1 / KuroBox standard ++ # mount -t smbfs -o password="" //<your_linkstation_name_or_ip>/share/mnt ++ # cp u-boot-hd.ram.bin /mnt ++ # cp ../uloader-2.4.17/uloader.o /mnt ++ # cp ../uloader-2.4.17/u-boot-load-hd.sh /mnt ++ # umount /mmt ++ ++ For LinkStation HG / KuroBox HG ++ # mount -t smbfs -o password="" //<your_linkstation_name_or_ip>/share/mnt ++ # cp u-boot-hg.ram.bin /mnt ++ # cp ../uloader-2.4.20/uloader.o /mnt ++ # cp ../uloader-2.4.20/u-boot-load-hg.sh /mnt ++ # umount /mmt ++ ++ If you installed the serial port, open another window and use minicom to ++ connect to your LinkStation serial console. The serial port settings are ++ 57600,N,8, the same as the settings used by the original Linux kernel. ++ ++ Start netcat to communicate with the U-Boot net console. Open another window ++ and run board/linkstation/nc.sh. Nc.sh is a simple script which invokes ++ netcat with the correct options. To quit nc, press ^T (control-T). ++ # cd $UBOOT_BUILD/u-boot-1.1.4 ++ # board/linkstation/nc.sh <ip_of_your_linkstation> ++ ++ Where <ip_of_your_linkstation> is CONFIG_IPADDR_LS (see Configure U-Boot ++ above). When you run nc.sh nothing will be written to the screen. This is ++ normal as Linux is not using the net console. ++ ++ From your original window, use telnet to connect to the LinkStation and ++ launch U-Boot. Replace lshg in the example below with the name / IP address ++ of your LinkStation. Replace myroot with the login you created when you ++ gained telnet access. For LinkStation 1 / KuroBox standard, use ++ u-boot-load-hd.sh instead of u-boot-load-hg.sh. Type the commands shown in ++ bold. ++ # telnet lshg ++ Trying 192.168.0.58... ++ Connected to lshg. ++ Escape character is '^]'. ++ BUFFALO INC. Link Station series HD-HGLAN (IEMITSU) ++ HD-HGLAN6C5 login: myroot ++ Linux (none) 2.4.20_mvl31-ppc_linkstation #3 Thu May 19 13:34:18 JST 2005 ++ ppc unknown ++ root@HD-HGLAN6C5:~# cd /mnt/share ++ root@HD-HGLAN6C5:/mnt/share# ./u-boot-load-hg.sh ++ root@HD-HGLAN6C5:/mnt/share# exit ++ Connection closed by foreign host. ++ # ++ ++ If you have a serial console you should see the initial U-Boot startup ++ messages. Even if the default console is the net console, U-Boot still sends ++ the console output to the serial port until it initialises the network ++ controller. ++ U-Boot 1.1.4 LiSt 2.1.0 (Sep 12 2006 - 23:09:44) LinkStation HG / KuroBox HG ++ CPU: MPC8245 Revision 1.4 at 262.144 MHz: 16 kB I-Cache 16 kB D-Cache ++ DRAM: 128 MB ++ FLASH: 4 MB ++ *** Warning - bad CRC, using default environment ++ 00 0b 10ec 8169 0200 ff ++ 00 0c 1283 8212 0180 ff ++ 00 0e 1033 0035 0c03 ff ++ 00 0e 1033 0035 0c03 ff ++ 00 0e 1033 00e0 0c03 ff ++ Net: RTL8169#0 ++ ++ Watch the net console window. After a few seconds, time needed by U-Boot to ++ initialise the network controller and the IDE controller you should see the ++ U-Boot messages. ++ U-Boot 1.1.4 LiSt 2.1.0 (Sep 12 2006 - 23:09:44) LinkStation HG / KuroBox HG ++ IDE: Bus 0: OK ++ Device 0: Model: Maxtor 7Y250P0 Firm: YAR41BW0 Ser#: Y62W8PDE ++ Type: Hard Disk ++ Supports 48-bit addressing ++ Capacity: 239372.4 MB = 233.7 GB (490234752 x 512) ++ Boot in 10 seconds ('s' to stop)... ++ ++ Press 's' on your keyboard to stop the boot process. ++ ++ If you want to use the serial console, watch the power LED of your ++ LinkStation. When it starts blinking very slowly, use the power button to ++ stop the boot process. Wait for the power LED to go dim and press and hold ++ the power button until the LED lights up brightly indicating that the boot ++ process has stopped. Now press the reset button twice and you should see the ++ U-Boot command prompt (=>) in your minicom window. You can now control ++ U-Boot from the minicom window. ++ ++ Using u-boot-load-hd.sh / u-boot-load-hg.sh leads to the above results on ++ devices with the original software. On some LinkStations with modified ++ software, reboot has been modified to send a reboot command to the AVR. ++ This is indicated by the fast blinking of the power LED immediately after ++ running u-boot-load-hd.sh / u-boot-load-hg.sh. Once the AVR receives a ++ reboot command, the reboot process cannot be stopped. The AVR will reboot ++ the LinkStation 5 min after receiving the reboot command. ++ If you find yourself in the above situation you can still test U-Boot by ++ booting your LinkStation with the AVR disabled. Press and hold the reset ++ button and then press the power button. All LEDs will start flashing but ++ your LinkStation will boot normally. Now you can use the procedure ++ described above with one caveat: the AVR being disabled, pressing the ++ buttons will have no effect so you will not be able to test the behaviour ++ of the minimal console. ++ ++ Once you get the U-Boot command prompt, start testing it. Read the ++ [15]U-Boot documentation and try each command you are interested in. ++ ++ Keep in mind that U-Boot interprets all input number as hex numbers. If, for ++ example, you type 256, U-Boot will interpret it as 598 decimal. ++ ++ When you are testing memory write commands, do not attempt to write to the ++ first MB of memory (0x00000000 to 0x00100000) as you will be overwriting the ++ exception vectors and U-Boot will crash. ++ ++ An important command is flinfo which displays information about the flash ++ chip. If the information displayed is correct for your flash, test the flash ++ erase and flash write commands. To do this, you will need to find an empty ++ sector, one for which each byte is 0xFF. Hint: check the last flash sector ++ first, chances are that it's empty. When you are testing commands that write ++ to the flash, always remember that you can write a single byte but you can ++ only erase whole sectors. ++ ++ Be very careful not to write to the flash memory range 0xFFC00000 to ++ 0xFFF7FFFF. This area contains the Linux kernel, the initial RAM disk used ++ for EM mode, the bootloader and the configuration sector (which holds the ++ "OKOK" or "NGNG" pattern). The range 0xFFF80000 to 0xFFFFFFFF is the user ++ area and, in most cases, is empty. Always check using the U-Boot command md ++ (memory display) if the flash area you intend to use is empty (all bytes are ++ 0xFF). For more information about the flash organisation, read ++ [16]PPCFlashROM for the LinkStation 1 / KuroBox standard or [17]HGFlashROM ++ for the LinkStation HG / KuroBox HG. ++ ++ ROM Build ++ ++ Once you are happy with the RAM build, you are ready for the ROM build. ++ ++ For LinkStation 1 / KuroBox standard run: ++ make linkstation_HDLAN_config ++ make linkstation_HDLAN ++ ++ The name of the resulting binary is u-boot-hd.flash.bin ++ ++ For LinkStation HG / KuroBox HG run: ++ make linkstation_HGLAN_config ++ make linkstation_HGLAN ++ ++ The name of the resulting binary is u-boot-hg.flash.bin ++ ++ Install ++ ++ Do not attempt to flash from U-Boot if the power LED is blinking. Your ++ LinkStation is likely to reboot and you will end up with a "brick" ++ Test the flash commands thoroughly before deciding to burn U-Boot into ++ flash. Write at least 128 kB to the flash to test potential timeout ++ problems ++ The flash routines in this version of U-Boot for the LinkStation should be ++ able to identify and handle any CFI flash which uses the AMD standard ++ command set. However, they were tested only on a LinkStation with a Fujitsu ++ MBM29PL32TM flash chip and on a LinkStation HG with a ST Micro M29DW324DB ++ flash chip. ++ Be very careful not to flash your hardware with the wrong U-Boot build. ++ Flashing any RAM build or flashing a ROM build for the LinkStation 1 / ++ KuroBox standard into the LinkStation HG / KuroBox HG or viceversa will ++ "brick" your device. This is especially true if you are flashing from Linux ++ as U-Boot has safety checks to avoid flashing the wrong build. ++ ++ Flashing U-Boot from U-Boot ++ ++ The RAM build of U-Boot can be used to load and flash the ROM build. This is ++ the preferred method. ++ ++ Boot your LinkStation normally. Open a telnet session and create a directory ++ to hold the U-Boot flash image. ++ root@linkstation:~# cd /mnt/share ++ root@linkstation:/mnt/share# mkdir u-boot ++ ++ Copy the U-Boot flash image to your LinkStation SMB share in the directory ++ u-boot. ++ ++ Load the RAM build of U-Boot and at the U-Boot command prompt type: ++ => run upgrade ++ ++ U-Boot will attempt to load the ROM build from the directory share/u-boot/ ++ on the third partition of the hard drive. If the load is successful, it will ++ do the following: ++ 1. unprotect the bootloader area; ++ 2. erase the bootloader area; ++ 3. copy the loaded file to the bootloader area; ++ 4. verify the copy; ++ ++ Here is the output of run upgrade ++ => run upgrade ++ Loading 0:3:share/u-boot/u-boot-hg.flash.bin ++ 174668 bytes read ++ Un-Protected 3 sectors ++ Flash erase: first = 55 @ 0xfff00000 ++ last = 57 @ 0xfff20000 ++ Flash erase: Done ++ Erased 3 sectors ++ Copy to Flash... done ++ Total of 174668 bytes were the same ++ => ++ ++ When the above sequence finishes, U-Boot returns to the command prompt (=>). ++ ++ Depending on your flash chip, the flash operation can take a long time. Wait ++ patiently and do not try to power down or otherwise interrupt the flash or ++ you will end up with a "brick". ++ ++ Reboot: ++ => reset ++ ++ The power LED should start blinking slowly and, if you have a serial ++ console, you should see the U-Boot startup messages. Your LinkStation is now ++ running U-Boot. ++ ++ Flashing U-Boot from Linux ++ ++ Connect to your LinkStation using either the serial port or telnet. ++ ++ For LinkStation 1 / KuroBox standard run: ++ # cd /mnt/share/u-boot ++ # dd if=u-boot-hd.flash.bin of=/dev/fl2 bs=1k ++ # cmp u-boot.bin /dev/fl2 ++ ++ For LinkStation HG / KuroBox HG run: ++ # cd /mnt/share/u-boot ++ # dd if=u-boot-hg.flash.bin of=/dev/mtd1 bs=1k ++ # cmp u-boot.bin /dev/mtd1 ++ ++ The above commands for LinkStation HG / KuroBox HG will work on devices with ++ the original kernel version 2.4.20 but might to work on earlier devices ++ using kernel version 2.4.17. Please check which device corresponds to the ++ bootloader partition on your hardware. ++ ++ If the Flash Fails ++ ++ If the flash was not written correctly but U-Boot returns at the command ++ prompt, try to re-run run upgrade. ++ ++ If the same happens when you attempt to install U-Boot from Linux, try to dd ++ again. ++ ++ If your flash fails completely, for example due to a power failure, all is ++ not completely lost. You can still use a JTAG cable to re-flash your ++ Linkstation. Unfortunately, this is a relatively complicated and expensive ++ solution as it involves acquiring or building the JTAG cable and soldering ++ the header for it on the LinkStation motherboard. For more information on ++ how to use a JTAG cable with the LinkStation you can visit ++ [18]www.linkstationwiki.net and [19]www.kurobox.com/mwiki. ++ ++ EM Mode ++ ++ Warning for the LinkStation / LinkStation HG users ++ ++ Do not attempt to boot into EM mode using the method described here. The ++ password for the EM mode is unknown for all LinkStation models. ++ ++ Once you have U-Boot installed in the on-board flash, you can boot in EM ++ mode even if the third boot command described above doesn't work. ++ ++ Stop the boot countdown by pressing 's' in your net console window and, at ++ the U-Boot command prompt, run: ++ => run writeng ++ => run flboot ++ ++ The above commands write "NGNG" to 0xFFF70000 and boot from the on-board ++ flash. To revert to normal boot by writing "OKOK" to 0xFFF70000, run: ++ => run writeok ++ => boot ++ ++ Advanced configuration ++ ++ The initial U-Boot configuration can be changed by editing the file ++ include/configs/linkstation.h. ++ ++ In all the examples below, please note the backslash-zero (\0) at the end of ++ the strings and the space-backslash ( \) at the end of each lines and do not ++ change them. ++ ++ Change the name of the default boot file ++ ++ Search for the lines containing: ++ "hdpart=0:1\0" \ ++ "hdfile=boot/vmlinux.UBoot\0" \ ++ ++ and change them to the values you want. Partition 0:1 means disk 0, ++ partition 1. Obviously, you can only change the partition number as there is ++ only one disk. The name of the file must be given relative to the root of ++ the partition. ++ ++ Change the default console to the serial console ++ ++ Search for the lines containing: ++ "stdin=nc\0" \ ++ "stdout=nc\0" \ ++ "stderr=nc\0" \ ++ ++ and change them to: ++ "stdin=serial\0" \ ++ "stdout=serial\0" \ ++ "stderr=serial\0" \ ++ ++ Change the default boot command to boot from flash ++ ++ Search for the lines containing: ++ "bootcmd1=run hdboot;run flboot\0" \ ++ "bootcmd2=run flboot\0" \ ++ ++ and change them to: ++ "bootcmd1=run flboot\0" \ ++ "bootcmd2=run hdboot;run flboot\0" \ ++ ++References ++ ++ 1. http://www.linuxnotincluded.org.uk/fdl.txt ++ 2. http://www.linkstationwiki.net/index.php?title=CGI_Exploit_%28PowerPC%29_original_method_of_Hacking_the_LinkStation ++ 3. http://www.linkstationwiki.net/index.php?title=Turn_your_LinkStation_into_a_Kuro_Box_%28PowerPC%29 ++ 4. http://linkstationwiki.net/index.php?title=OpenLink ++ 5. http://linkstationwiki.net/index.php?title=The_LinkStation_firmware_flasher ++ 6. http://downloads.linkstationwiki.net/snapshots/HD-HGLAN_149_100_telnet.zip ++ 7. http://www.linkstationwiki.net/index.php?title=Add_a_Serial_port_to_the_PowerPC_Linkstation ++ 8. http://netcat.sourceforge.net/ ++ 9. http://www.vulnwatch.org/netcat ++ 10. http://ftp.sunet.se/pub/Linux/distributions/eldk/3.1.1/ppc-linux-x86/iso/ppc-2005-03-07.iso ++ 11. ftp://ftp.denx.de/pub/u-boot/u-boot-1.1.4.tar.bz2 ++ 12. http://www.linuxnotincluded.org.uk/linkstation/downloads/u-boot-1.1.4-list-2.1.0.diff.gz ++ 13. http://www.linuxnotincluded.org.uk/linkstation/downloads/uloader-2.4.17.tar.gz ++ 14. http://www.linuxnotincluded.org.uk/linkstation/downloads/uloader-2.4.20.tar.gz ++ 15. http://www.denx.de/wiki/DULG/Manual ++ 16. http://linkstationwiki.net/index.php?title=Information/PPCFlashROM ++ 17. http://linkstationwiki.net/index.php?title=Information/HGFlashROM ++ 18. http://www.linkstationwiki.net/ ++ 19. http://www.kurobox.com/mwiki +diff -urN u-boot-86xx/board/linkstation/Makefile u-boot-86xx-kuro_clean/board/linkstation/Makefile +--- u-boot-86xx/board/linkstation/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/Makefile 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,41 @@ ++# ++# (C) Copyright 2001 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS = $(BOARD).o flash.o ide.o hwctl.o bootls.o avr.o ++SOBJS = early_init.o ++ ++$(LIB): .depend $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++sinclude .depend ++ ++######################################################################### +diff -urN u-boot-86xx/board/linkstation/avr.c u-boot-86xx-kuro_clean/board/linkstation/avr.c +--- u-boot-86xx/board/linkstation/avr.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/avr.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,307 @@ ++/* ++ * avr.c ++ * ++ * AVR functions ++ * ++ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++#include <common.h> ++#include <ns16550.h> ++#include <console.h> ++ ++/* Button codes from the AVR */ ++#define PWRR 0x20 /* Power button release */ ++#define PWRP 0x21 /* Power button push */ ++#define RESR 0x22 /* Reset button release */ ++#define RESP 0x23 /* Reset button push */ ++#define AVRINIT 0x33 /* Init complete */ ++#define AVRRESET 0x31 /* Reset request */ ++ ++/* LED commands */ ++#define PWRBLINKSTRT '[' /* Blink power LED */ ++#define PWRBLINKSTOP 'Z' /* Solid power LED */ ++#define HDDLEDON 'W' /* HDD LED on */ ++#define HDDLEDOFF 'V' /* HDD LED off */ ++#define HDDBLINKSTRT 'Y' /* HDD LED start blink */ ++#define HDDBLINKSTOP 'X' /* HDD LED stop blink */ ++ ++/* Timings for LEDs blinking to show choice */ ++#define PULSETIME 250 /* msecs */ ++#define LONGPAUSE (5 * PULSETIME) ++ ++/* Button press times */ ++#define PUSHHOLD 1000 /* msecs */ ++#define NOBUTTON (6 * (LONGPAUSE+PULSETIME)) ++ ++/* Boot and console choices */ ++#define MAX_BOOT_CHOICE 3 ++ ++static char *consoles[] = { ++ "serial", ++#if defined(CONFIG_NETCONSOLE) ++ "nc", ++#endif ++}; ++#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *)) ++ ++#if !defined(CONFIG_NETCONSOLE) ++#define DEF_CONS_CHOICE 0 ++#else ++#define DEF_CONS_CHOICE 1 ++#endif ++ ++#define perror(fmt,args...) printf("%s: ",__FUNCTION__);printf(fmt,##args) ++ ++extern void miconCntl_SendCmd(unsigned char dat); ++extern void miconCntl_DisWDT(void); ++ ++static int boot_stop; ++ ++static int boot_choice = 1; ++static int cons_choice = DEF_CONS_CHOICE; ++ ++static char envbuffer[16]; ++ ++void init_AVR_DUART (void) ++{ ++ NS16550_t AVR_port = (NS16550_t) CFG_NS16550_COM2; ++ int clock_divisor = CFG_NS16550_CLK / 16 / 9600; ++ ++ /* ++ * AVR port init sequence taken from ++ * the original Linkstation init code ++ * Normal U-Boot serial reinit doesn't ++ * work because the AVR uses even parity ++ */ ++ AVR_port->lcr = 0x00; ++ AVR_port->ier = 0x00; ++ AVR_port->lcr = LCR_BKSE; ++ AVR_port->dll = clock_divisor & 0xff; ++ AVR_port->dlm = (clock_divisor >> 8) & 0xff; ++ AVR_port->lcr = LCR_WLS_8 | LCR_PEN | LCR_EPS; ++ AVR_port->mcr = 0x00; ++ AVR_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; ++ ++ miconCntl_DisWDT(); ++ ++ boot_stop = 0; ++ miconCntl_SendCmd(PWRBLINKSTRT); ++} ++ ++void hw_watchdog_reset (void) ++{ ++} ++ ++static inline int avr_tstc(void) ++{ ++ return (NS16550_tstc((NS16550_t)CFG_NS16550_COM2)); ++} ++ ++static inline char avr_getc(void) ++{ ++ return (NS16550_getc((NS16550_t)CFG_NS16550_COM2)); ++} ++ ++static int push_timeout(char button_code) ++{ ++ ulong push_start = get_timer(0); ++ while (get_timer(push_start) <= PUSHHOLD) ++ if (avr_tstc() && avr_getc() == button_code) ++ return 0; ++ return 1; ++} ++ ++static void next_boot_choice(void) ++{ ++ ulong return_start; ++ ulong pulse_start; ++ int on_times; ++ int button_on; ++ int led_state; ++ char c; ++ ++ button_on = 0; ++ return_start = get_timer(0); ++ ++ on_times = boot_choice; ++ led_state = 0; ++ miconCntl_SendCmd(HDDLEDOFF); ++ pulse_start = get_timer(0); ++ ++ while (get_timer(return_start) <= NOBUTTON || button_on) ++ { ++ if (avr_tstc()) { ++ c = avr_getc(); ++ if (c == PWRP) ++ button_on = 1; ++ else if (c == PWRR) { ++ button_on = 0; ++ return_start = get_timer(0); ++ if (++boot_choice > MAX_BOOT_CHOICE) ++ boot_choice = 1; ++ sprintf(envbuffer, "bootcmd%d", boot_choice); ++ if (getenv(envbuffer)) { ++ sprintf(envbuffer, "run bootcmd%d", boot_choice); ++ setenv("bootcmd", envbuffer); ++ } ++ on_times = boot_choice; ++ led_state = 1; ++ miconCntl_SendCmd(HDDLEDON); ++ pulse_start = get_timer(0); ++ } else { ++ perror("Unexpected code: 0x%02X\n", c); ++ } ++ } ++ if (on_times && get_timer(pulse_start) > PULSETIME) { ++ if (led_state == 1) { ++ --on_times; ++ led_state = 0; ++ miconCntl_SendCmd(HDDLEDOFF); ++ } else { ++ led_state = 1; ++ miconCntl_SendCmd(HDDLEDON); ++ } ++ pulse_start = get_timer(0); ++ } ++ if (!on_times && get_timer(pulse_start) > LONGPAUSE) { ++ on_times = boot_choice; ++ led_state = 1; ++ miconCntl_SendCmd(HDDLEDON); ++ pulse_start = get_timer(0); ++ } ++ } ++ if (led_state) ++ miconCntl_SendCmd(HDDLEDOFF); ++} ++ ++void next_cons_choice(int console) ++{ ++ ulong return_start; ++ ulong pulse_start; ++ int on_times; ++ int button_on; ++ int led_state; ++ char c; ++ device_t *idev; ++ device_t *odev; ++ ++ button_on = 0; ++ cons_choice = console; ++ return_start = get_timer(0); ++ ++ on_times = cons_choice+1; ++ led_state = 1; ++ miconCntl_SendCmd(HDDLEDON); ++ pulse_start = get_timer(0); ++ ++ while (get_timer(return_start) <= NOBUTTON || button_on) ++ { ++ if (avr_tstc()) { ++ c = avr_getc(); ++ if (c == RESP) ++ button_on = 1; ++ else if (c == RESR) { ++ button_on = 0; ++ return_start = get_timer(0); ++ cons_choice = (cons_choice + 1) % MAX_CONS_CHOICE; ++ idev = search_device(DEV_FLAGS_INPUT, consoles[cons_choice]); ++ odev = search_device(DEV_FLAGS_OUTPUT, consoles[cons_choice]); ++ console_setfile (stdin, idev); ++ console_setfile (stdout, odev); ++ console_setfile (stderr, odev); ++ on_times = cons_choice+1; ++ led_state = 0; ++ miconCntl_SendCmd(HDDLEDOFF); ++ pulse_start = get_timer(0); ++ } else { ++ perror("Unexpected code: 0x%02X\n", c); ++ } ++ } ++ if (on_times && get_timer(pulse_start) > PULSETIME) { ++ if (led_state == 0) { ++ --on_times; ++ led_state = 1; ++ miconCntl_SendCmd(HDDLEDON); ++ } else { ++ led_state = 0; ++ miconCntl_SendCmd(HDDLEDOFF); ++ } ++ pulse_start = get_timer(0); ++ } ++ if (!on_times && get_timer(pulse_start) > LONGPAUSE) { ++ on_times = cons_choice+1; ++ led_state = 0; ++ miconCntl_SendCmd(HDDLEDOFF); ++ pulse_start = get_timer(0); ++ } ++ } ++ if (led_state); ++ miconCntl_SendCmd(HDDLEDOFF); ++} ++ ++int avr_input(void) ++{ ++ char avr_button; ++ int ret; ++ ++ if (!avr_tstc()) ++ return 0; ++ ++ avr_button = avr_getc(); ++ switch (avr_button) { ++ case PWRP: ++ if (push_timeout(PWRR)) { ++ /* Timeout before power button release */ ++ boot_stop = ~boot_stop; ++ if (boot_stop) ++ miconCntl_SendCmd(PWRBLINKSTOP); ++ else ++ miconCntl_SendCmd(PWRBLINKSTRT); ++ /* Wait for power button release */ ++ while (avr_getc() != PWRR) ++ ; ++ } ++ else ++ /* Power button released */ ++ next_boot_choice(); ++ break; ++ case RESP: ++ /* Wait for Reset button release */ ++ while (avr_getc() != RESR) ++ ; ++ next_cons_choice(cons_choice); ++ break; ++ case AVRINIT: ++ return 0; ++ default: ++ perror("Unexpected code: 0x%02X\n", avr_button); ++ return 0; ++ } ++ if (boot_stop) ++ return (-3); ++ else ++ return (-2); ++} ++ ++void avr_StopBoot(void) ++{ ++ boot_stop = ~0; ++ miconCntl_SendCmd(PWRBLINKSTOP); ++} ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/bootls.c u-boot-86xx-kuro_clean/board/linkstation/bootls.c +--- u-boot-86xx/board/linkstation/bootls.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/bootls.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,304 @@ ++/* ++ * bootls.c ++ * ++ * Boot a Linkstation kernel of type firmimg.bin ++ * ++ * U-Boot loader code for Linkstation kernel. A file of type firmimg.bin ++ * consists of a header, immediately followed by a compressed kernel image, ++ * followed by a compressed initrd image. ++ * ++ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * Derived from: ++ * ++ * arch/ppc/common/misc-simple.c (linux-2.4.17_mvl21-sandpoint) ++ * Author: Matt Porter <mporter@mvista.com> ++ * Derived from arch/ppc/boot/prep/misc.c ++ * 2001 (c) MontaVista, Software, Inc. ++ * ++ * common/cmd_bootm.c (u-boot-1.1.4) ++ * (C) Copyright 2000-2002 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ */ ++ ++#include <common.h> ++#include <command.h> ++ ++#include "firminfo.h" ++ ++#define _ALIGN(addr,size) (((addr)+size-1)&(~(size-1))) ++ ++struct bi_record { ++ unsigned long tag; /* tag ID */ ++ unsigned long size; /* size of record (in bytes) */ ++ unsigned long data[0]; /* data */ ++}; ++ ++#define BI_FIRST 0x1010 /* first record - marker */ ++#define BI_LAST 0x1011 /* last record - marker */ ++ ++extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); ++extern int gunzip(void *, int, unsigned char *, int *); ++ ++/* ++ * output BYTE data ++ */ ++static inline void outb(volatile unsigned char *addr, int val) ++{ ++ asm volatile("eieio"); ++ asm volatile("stb%U0%X0 %1,%0; sync; isync" : "=m" (*addr) : "r" (val)); ++} ++ ++unsigned long checksum_check(unsigned char* addr, unsigned long size) ++{ ++ long *laddr = (long *)addr; ++ unsigned long sum = 0,remain = 0; ++ int i; ++ while(size>=4) { ++ sum += *laddr; ++ laddr++; ++ size -= 4; ++ } ++ addr = (unsigned char*)laddr; ++ for(i=0;i<4;++i) { ++ remain = remain << 8; ++ if(size>i) remain += *addr; ++ addr++; ++ } ++ sum += remain; ++ return sum; ++} ++ ++void do_boot_lskernel (cmd_tbl_t *cmdtp, ++ int flag, ++ int argc, ++ char *argv[], ++ unsigned long load_addr, ++ unsigned long *len_ptr, ++ int verify) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ++ char *zimage_start; ++ int zimage_size; ++ unsigned long initrd_start; ++ unsigned long initrd_end; ++ unsigned long sp; ++ unsigned long cmd_start; ++ unsigned long cmd_end; ++ char *cmdline; ++ char *s; ++ bd_t *kbd; ++ void (*kernel)(bd_t *, ulong, ulong, ulong, ulong); ++ unsigned long iflag; ++ struct firminfo *info = (struct firminfo *)load_addr; ++ struct bi_record *rec; ++ ++ int i; ++ char *flashstr="FLASH"; ++ ++ for (i=0; i <= 4; i++) ++ if (info->subver[i] != flashstr[i]) { ++ puts ("Not a Linkstation kernel\n"); ++ return; ++ } ++ ++ printf("\n******* Product Information *******\n"); ++ printf("----------------------------------\n"); ++ ++ printf("Product Name: %s\n", info->firmname); ++ printf(" VER: %d.%02d\n", info->ver_major, info->ver_minor); ++ printf(" Date: %d/%d/%d %d:%d:%d\n", ++ info->year+1900, info->mon, info->day, ++ info->hour,info->min,info->sec); ++ printf("----------------------------------\n"); ++ ++ if (verify) { ++ printf("Verifying checksum... "); ++ if (checksum_check((unsigned char*)info, info->size) != 0) { ++ printf("Failed!: checksum %08X, expecting 0\n", ++ checksum_check((unsigned char*)info, info->size)); ++ return; /* Returns on error */ ++ } else ++ printf("OK\n"); ++ } ++ ++ zimage_start = (char*)info + info->kernel_offset; ++ zimage_size = (int)info->kernel_size; ++ iflag = disable_interrupts(); ++ puts("Uncompressing kernel..."); ++ if (gunzip(0, 0x400000, zimage_start, &zimage_size) != 0) { ++ puts ("Failed! MUST reset board to recover\n"); ++ do_reset (cmdtp, flag, argc, argv); ++ } else ++ puts("done.\n"); ++ ++ /* ++ * Allocate space for command line and board info - the ++ * address should be as high as possible within the reach of ++ * the kernel (see CFG_BOOTMAPSZ settings), but in unused ++ * memory, which means far enough below the current stack ++ * pointer. ++ */ ++ ++ asm( "mr %0,1": "=r"(sp) : ); ++ debug ("## Current stack ends at 0x%08lX ", sp); ++ sp -= 2048; /* just to be sure */ ++ if (sp > CFG_BOOTMAPSZ) ++ sp = CFG_BOOTMAPSZ; ++ sp &= ~0xF; ++ debug ("=> set upper limit to 0x%08lX\n", sp); ++ ++ cmdline = (char *)((sp - CFG_BARGSIZE) & ~0xF); ++ if ((s = getenv("bootargs")) == NULL) ++ s = "root=/dev/hda1"; ++ strcpy (cmdline, s); ++ cmd_start = (ulong)&cmdline[0]; ++ cmd_end = cmd_start + strlen(cmdline); ++ debug ("## cmdline at 0x%08lX ... 0x%08lX\n", cmd_start, cmd_end); ++ ++ kbd = (bd_t *)(((ulong)cmdline - sizeof(bd_t)) & ~0xF); ++ *kbd = *(gd->bd); ++ if ((s = getenv ("clocks_in_mhz")) != NULL) { ++ /* convert all clock information to MHz */ ++ kbd->bi_intfreq /= 1000000L; ++ kbd->bi_busfreq /= 1000000L; ++ } ++ ++ kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))0x4; ++ ++ if (info->initrd_size > 0) { ++ initrd_start = (unsigned long)((char*)info + info->initrd_offset); ++ initrd_end = initrd_start + info->initrd_size; ++ if(initrd_start > 0xffc00000 && initrd_end < 0xffefffff) { ++ unsigned long nsp; ++ unsigned long data; ++ ++ data = initrd_start; ++ /* ++ * the inital ramdisk does not need to be within ++ * CFG_BOOTMAPSZ as it is not accessed until after ++ * the mm system is initialised. ++ * ++ * do the stack bottom calculation again and see if ++ * the initrd will fit just below the monitor stack ++ * bottom without overwriting the area allocated ++ * above for command line args and board info. ++ */ ++ asm( "mr %0,1": "=r"(nsp) : ); ++ nsp -= 2048; /* just to be sure */ ++ nsp &= ~0xF; ++ nsp -= info->initrd_size; ++ nsp &= ~(4096 - 1); /* align on page */ ++ initrd_start = nsp; ++ initrd_end = initrd_start + info->initrd_size; ++ printf ("Loading Ramdisk at 0x%08lX, end 0x%08lX ... ", ++ initrd_start, initrd_end); ++ memmove ((void *)initrd_start, (void *)data, info->initrd_size); ++ puts ("OK\n"); ++ } ++ } else { ++ initrd_start = 0; ++ initrd_end = 0; ++ } ++ ++ /* ++ * The kernel looks for this structure even if ++ * the information in it is replaced by the ++ * Linkstation kernel ++ */ ++ rec = (struct bi_record *)_ALIGN((unsigned long)zimage_size + ++ (1 << 20) - 1,(1 << 20)); ++ rec->tag = BI_FIRST; ++ rec->size = sizeof(struct bi_record); ++ rec = (struct bi_record *)((unsigned long)rec + rec->size); ++ rec->tag = BI_LAST; ++ rec->size = sizeof(struct bi_record); ++ ++#if defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ // kernel load done. ++ outb(0x80004500, 0x49); // send signal ++ outb(0x80004500, 0x49); // send signal ++ outb(0x80004500, 0x49); // send signal ++ outb(0x80004500, 0x49); // send signal ++#endif ++#if defined(CONFIG_HGLAN) ++ // full speed ++ udelay(10000); /* 10 msec */ ++ outb(0x80004500, 0x5D); // send signal ++ outb(0x80004500, 0x5D); // send signal ++ outb(0x80004500, 0x5D); // send signal ++ outb(0x80004500, 0x5D); // send signal ++#endif ++#if defined(CONFIG_HTGL) ++ // LINK/ACT led controll ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x39); // 9 ++ outb(0x80004500, 0x31); // 1 ++ outb(0x80004500, 0x39); // 9 ++ outb(0x80004500, 0x30); // 0 ++ outb(0x80004500, 0x92); // 1000Mbps down ++ outb(0x80004500, 0x92); // 1000Mbps down ++ ++ udelay(10000); /* 10 msec */ ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x39); // 9 ++ outb(0x80004500, 0x30); // 0 ++ outb(0x80004500, 0x39); // 9 ++ outb(0x80004500, 0x30); // 0 ++ outb(0x80004500, 0x90); // 100Mbps down ++ outb(0x80004500, 0x90); // 100Mbps down ++ ++ udelay(10000); /* 10 msec */ ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x61); // a ++ outb(0x80004500, 0x38); // 8 ++ outb(0x80004500, 0x46); // F ++ outb(0x80004500, 0x39); // 9 ++ outb(0x80004500, 0x30); // 0 ++ outb(0x80004500, 0x8E); // 10Mbps down ++ outb(0x80004500, 0x8E); // 10Mbps down ++ ++ udelay(10000); /* 10 msec */ ++ outb(0x80004500, 0x5F); // _ ++ outb(0x80004500, 0x5F); // _ ++#endif ++ ++/* ++ * This is what the original boot loader sends ++ * just before jumping to the kernel start ++ */ ++ outb(0xFF000001, 0xFF); ++ ++ puts("Booting the kernel\n"); ++ ++ /* ++ * Linux Kernel Parameters: ++ * r3: ptr to board info data ++ * r4: initrd_start or 0 if no initrd ++ * r5: initrd_end - unused if r4 is 0 ++ * r6: Start of command line string ++ * r7: End of command line string ++ */ ++ (*kernel)((bd_t *)0xFF000001, initrd_start, initrd_end, cmd_start, cmd_end); ++} ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/config.mk u-boot-86xx-kuro_clean/board/linkstation/config.mk +--- u-boot-86xx/board/linkstation/config.mk 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/config.mk 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,50 @@ ++# ++# (C) Copyright 2001-2003 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++# LinkStation/LinkStation-HG: ++# ++# Valid values for TEXT_BASE are: ++# ++# Standard configuration - all models ++# 0xFFF00000 boot from flash ++# ++# Test configuration (boot from RAM using uloader.o) ++# LinkStation HD-HLAN and KuroBox Standard ++# 0x03F00000 boot from RAM ++# LinkStation HD-HGLAN and KuroBox HG ++# 0x07F00000 boot from RAM ++# ++ ++sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp ++ ++ifndef TEXT_BASE ++# For flash image - all models ++TEXT_BASE = 0xFFF00000 ++# For RAM image ++# HLAN and LAN ++#TEXT_BASE = 0x03F00000 ++# HGLAN and HGTL ++#TEXT_BASE = 0x07F00000 ++endif ++ ++PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) +diff -urN u-boot-86xx/board/linkstation/early_init.S u-boot-86xx-kuro_clean/board/linkstation/early_init.S +--- u-boot-86xx/board/linkstation/early_init.S 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/early_init.S 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,432 @@ ++/* ++ * board/linkstation/early_init.S ++ * ++ * Begin at some arbitrary location in RAM or Flash ++ * Initialize core registers ++ * Configure memory controller (Not executing from RAM) ++ * Initialize UARTs ++ * Simple RAM test (currently suspended) ++ * ++ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * Modified for U-Boot from arch/ppc/boot/linkstation/head.S from ++ * the GPL code for the Buffalo Terastation, derived in its turn from: ++ * ++ * arch/ppc/boot/sandpoint/head.S ++ * ++ * Initial board bringup code for Motorola SPS Sandpoint test platform ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * Derived from arch/ppc/boot/pcore/head.S (mporter@mvista.com) ++ * ++ * Copyright 2001 MontaVista Software Inc. ++ */ ++ ++#include <config.h> ++#include <ppc_asm.tmpl> ++#include <mpc824x.h> ++#include <ppc_defs.h> ++#include <asm/cache.h> ++ ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++#define RAM_SIZE 0x04000000 ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++#define RAM_SIZE 0x08000000 ++#endif ++ ++#define UART1 0x80004500 ++#define UART1_IER 0x80004501 ++#define UART1_FCR 0x80004502 ++#define UART1_LCR 0x80004503 ++#define UART1_DCR 0x80004511 ++#define UART2 0x80004600 ++#define UART2_IER 0x80004601 ++#define UART2_FCR 0x80004602 ++#define UART2_LCR 0x80004603 ++#define UART2_DCR 0x80004611 ++ ++#define WM32(address,data) \ ++ lis r3, address@h; \ ++ ori r3, r3, address@l; \ ++ lis r4, data@h; \ ++ ori r4, r4, data@l; \ ++ stw r4, 0x0000(r3); \ ++ sync; \ ++ isync; ++ ++#define WM16(address,data) \ ++ lis r3, address@h; \ ++ ori r3, r3, address@l; \ ++ li r4, data; \ ++ sth r4, 0x0000(r3); \ ++ sync; \ ++ isync; ++ ++#define WM8(address,data) \ ++ lis r3, address@h; \ ++ ori r3, r3, address@l; \ ++ li r4, data; \ ++ stb r4, 0(r3); \ ++ sync; \ ++ isync; ++ ++ .text ++ ++ .globl early_init_f ++early_init_f: ++/* ++ * Configure core registers ++ */ ++ ++ /* Establish default MSR value, exception prefix 0xFFF */ ++ li r3,MSR_IP|MSR_FP ++ mtmsr r3 ++ ++ /* Clear BATS */ ++ li r8,0 ++ mtspr DBAT0U,r8 ++ mtspr DBAT0L,r8 ++ mtspr DBAT1U,r8 ++ mtspr DBAT1L,r8 ++ mtspr DBAT2U,r8 ++ mtspr DBAT2L,r8 ++ mtspr DBAT3U,r8 ++ mtspr DBAT3L,r8 ++ mtspr IBAT0U,r8 ++ mtspr IBAT0L,r8 ++ mtspr IBAT1U,r8 ++ mtspr IBAT1L,r8 ++ mtspr IBAT2U,r8 ++ mtspr IBAT2L,r8 ++ mtspr IBAT3U,r8 ++ mtspr IBAT3L,r8 ++ isync ++ sync ++ sync ++ ++ /* Set segment registers */ ++ lis r8, 0x0000 ++ isync ++ mtsr SR0,r8 ++ mtsr SR1,r8 ++ mtsr SR2,r8 ++ mtsr SR3,r8 ++ mtsr SR4,r8 ++ mtsr SR5,r8 ++ mtsr SR6,r8 ++ mtsr SR7,r8 ++ mtsr SR8,r8 ++ mtsr SR9,r8 ++ mtsr SR10,r8 ++ mtsr SR11,r8 ++ mtsr SR12,r8 ++ mtsr SR13,r8 ++ mtsr SR14,r8 ++ mtsr SR15,r8 ++ isync ++ sync ++ sync ++ ++ /* Disable L1 icache/dcache */ ++ li r4,0x0000 ++ isync ++ mtspr HID0,r4 ++ sync ++ isync ++ ++ /* Flash Invalidate L1 icache/dcache */ ++ ++ ori r4,r4,0x8000 ++ ori r8,r4,0x0800 ++ isync ++ mtspr HID0,r8 ++ sync ++ isync ++ ++ /* Older cores need to manually clear ICFI bit */ ++ ++ mtspr HID0,r4 ++ sync ++ isync ++ ++#if !defined(CFG_RAMBOOT) ++melco_config_start: ++ /* --- CPU Configration registor setting for LinkStation --- */ ++ WM32(0x80041020,0x000000a0) /* Reset EPIC */ ++ ++ /* errata for latency timer */ ++ WM32(0xFEC00000,0x0d000080) ++ WM8(0xFEE00001,0x20) ++ /* cash size */ ++ WM32(0xFEC00000,0x0c000080) ++ WM8(0xFEE00000,0x08) ++ /* PCI configuration command register */ ++ WM32(0xFEC00000,0x04000080) ++ WM16(0xFEE00000,0x0600) ++ /* Processor interface configuration register 1 */ ++ WM32(0xFEC00000,0xa8000080) ++ /* WM32(0xFEE00000,0xd8131400) */ ++ lis r3, 0xFEE00000@h ++ ori r3, r3, 0xFEE00000@l ++ ++ lwz r5, 0(r3) /* load PCIR1 Config */ ++ lis r4, 0x0 ++ ori r4, r4, 0x1000 ++ and r5, r4, r5 /* Get Bit20(RCS0) */ ++ ++ lis r4, 0xd8130400@h ++ ori r4, r4, 0xd8130400@l ++ or r4, r4, r5 /* Save (RCS0) */ ++ ++ stw r4, 0x0000(r3) ++ sync ++ isync ++ ++ /* Processor interface configuration register 2 */ ++ WM32(0xFEC00000,0xac000080) ++ WM32(0xFEE00000,0x00000004) ++ /* Embeded Utility Memory Block Base Address register */ ++ WM32(0xFEC00000,0x78000080) ++ WM32(0xFEE00000,0x00000080) ++ /* Address map B option register */ ++ WM32(0xFEC00000,0xe0000080) ++ WM8(0xFEE00000,0x20) /* DLL_RESET on */ ++ ++ /* Address map B option register */ ++ WM32(0xFEC00000,0xe0000080) ++ WM8(0xFEE00000,0xc0) ++ /* PCI arbiter control register */ ++ WM32(0xFEC00000,0x46000080) ++ WM16(0xFEE00002,0x00c0) ++ ++ /* Added to use the high drive strength for the memory selects & addressing */ ++ WM32(0xFEC00000,0x73000080) ++ /* WM8(0xFEE00003,0x15) */ /*0x17*/ ++ /* Motorola Errata refer to User's Manual Errata#19 */ ++ /* WM8(0xFEE00003,0xD5) */ ++ WM8(0xFEE00003,0x95) ++ ++ /* set miscellaneous I/O control register 1 */ ++ WM32(0xFEC00000,0x76000080) ++ WM8(0xFEE00002,0x00) /*0x02*/ ++ /* set miscellaneous I/O control register 2 */ ++ WM32(0xFEC00000,0x77000080) ++ WM8(0xFEE00003,0x30) /* 0x30 */ ++ ++ /* init memory controller */ ++ WM32(0xFEC00000,0x80000080) ++ WM32(0xFEE00000,0x00FFFFFF) ++ ++ WM32(0xFEC00000,0x84000080) ++ WM32(0xFEE00000,0xFFFFFFFF) ++ ++ WM32(0xFEC00000,0x90000080) ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM32(0xFEE00000,0x3FFFFFFF) /* 64MB */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM32(0xFEE00000,0x7FFFFFFF) /* 128MB */ ++#endif ++ ++ WM32(0xFEC00000,0x94000080) ++ WM32(0xFEE00000,0xFFFFFFFF) ++ ++ WM32(0xFEC00000,0x88000080) ++ WM32(0xFEE00000,0x00030303) ++ /* EMSAR2 */ ++ WM32(0xFEC00000,0x8C000080) ++ WM32(0xFEE00000,0x03030303) ++ /* select EMSER1 */ ++ WM32(0xFEC00000,0x98000080) ++ WM32(0xFEE00000,0x00030303) ++ /* select EMSER2 */ ++ WM32(0xFEC00000,0x9C000080) ++ WM32(0xFEE00000,0x03030303) ++ ++ /* MMCR1 */ ++ WM32(0xFEC00000,0xf0000080) ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM32(0xFEE00000,0x0200E005) /* bank 0 13xnx4 */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM32(0xFEE00000,0x0200E005) /* bank 0 13xnx4 */ ++#endif ++ /* MCCR2 */ ++ WM32(0xFEC00000,0xf4000080) ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM32(0xFEE00000,0xe0150000) /* 100MHz Memory bus */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM32(0xFEE00000,0x80150000) /* 133MHz Memory bus */ ++#endif ++ /* MCCR3 */ ++ WM32(0xFEC00000,0xf8000080) ++ WM32(0xFEE00000,0x00000077) /* BSTOPRE_M =7 / REFREC=8 */ ++ ++ /* MCCR4 */ ++ WM32(0xFEC00000,0xfc000080) ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM32(0xFEE00000,0x29233222) /* CAS latency=2, burst length=8, Ext Rom=eable */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM32(0xFEE00000,0x29323222) /* CAS latency=3, burst length=4, Ext Rom=eable */ ++#endif ++ ++ /* Output driver control register */ ++ WM32(0xFEC00000,0x73000080) ++ WM8(0xFEE00003,0x15) /* for all 40 ohm */ ++ /* CLK driver Control Register */ ++ WM32(0xFEC00000,0x74000080) ++ WM16(0xFEE00000,0x7078) ++ /* select MBEN */ ++ WM32(0xFEC00000,0xa0000080) ++ WM8(0xFEE00000, 0x01) ++ /* MPM */ ++ WM32(0xFEC00000,0xa3000080) ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM8(0xFEE00003,0xF2) /* PGMAX = 242 */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM8(0xFEE00003,0xC9) /* PGMAX = 201 */ ++#endif ++ /* ERCR s */ ++ WM32(0xFEC00000,0xd0000080) /* ; select ERCR1 */ ++ WM32(0xFEE00000,0xffffff85) ++ WM32(0xFEC00000,0xd4000080) /* ; select ERCR2 */ ++ WM32(0xFEE00000,0xffffff05) ++ WM32(0xFEC00000,0xd8000080) /* ; select ERCR3 */ ++ WM32(0xFEE00000,0x0000f80f) ++ WM32(0xFEC00000,0xdc000080) /* ; select ERCR4 */ ++ WM32(0xFEE00000,0x0e000000) ++ ++ /* MCCR1 */ ++ WM32(0xFEC00000,0xf0000080) ++ WM32(0xFEE00000,0x0200E805) /* 11 + 3 clock wait MEMGO on */ ++ ++ /* Init UART for AVR */ ++ WM8(UART1_LCR,0x00) /* clear LCR */ ++ WM8(UART1_IER,0x00) /* disable interrupt */ ++ WM8(UART1_LCR,0x80) /* set LCR[DLAB] bit */ ++ WM8(UART1_DCR,0x01) /* set DUART mode */ ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM8(UART1, 0x8B) /* set DLL(baudrate 9600bps, 100MHz) */ ++ WM8(UART1_IER,0x02) /* set DLM(baudrate 9600bps, 100MHz) */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM8(UART1, 0x61) /* set DLL(baudrate 9600bps, 133MHz) */ ++ WM8(UART1_IER,0x03) /* set DLM(baudrate 9600bps, 133MHz) */ ++#endif ++ WM8(UART1_LCR,0x1b) /* set 8data, 1stop, even parity */ ++ WM8(UART1, 0x00) /* clear MCR */ ++ WM8(UART1_FCR,0x07) /* clear & enable FIFO */ ++ ++ /* Init UART for CONSOLE */ ++ WM8(UART2_LCR,0x00) /* clear LCR */ ++ WM8(UART2_IER,0x00) /* disable interrupt */ ++ WM8(UART2_LCR,0x80) /* set LCR[DLAB] bit */ ++ WM8(UART1_DCR,0x01) /* set DUART mode */ ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++ WM8(UART2, 0x6C) /* set DLL(baudrate 57600bps, 100MHz) */ ++ WM8(UART2_IER,0x00) /* set DLM(baudrate 57600bps, 100MHz) */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++ WM8(UART2, 0x90) /* set DLL(baudrate 57600bps, 133MHz) */ ++ WM8(UART2_IER,0x00) /* set DLM(baudrate 57600bps, 133MHz) */ ++#endif ++ WM8(UART2_LCR,0x03) /* set 8data, 1stop, non parity */ ++ WM8(UART2, 0x00) /* clear MCR */ ++ WM8(UART2_FCR,0x07) /* clear & enable FIFO */ ++#endif /* !defined (CFG_RAMBOOT) ++ ++ /* PCI Command Register initialize */ ++ lis r3, 0x8000 ++ ori r3, r3, 0x0004 ++ lis r4, 0xFEC0 ++ ori r4, r4, 0x0000 ++ stwbrx r4, 0, r3 ++ sync ++ isync ++ ++ li r6, 0x0006 ++ lis r5, 0xFEE0 ++ ori r5, r5, 0x0000 ++ sthbrx r5, 0, r6 ++ sync ++ isync ++ ++#if !defined(CFG_RAMBOOT) ++check_ram: ++ /* Wait 1 sec for AVR become enable */ ++ li r3,1000 ++ mulli r3,r3,1000 ++ mulli r4,r3,1000 /* nanoseconds */ ++ addi r4,r4,39 ++ li r5,40 /* 40ns if for 100 Mhz bus */ ++ divw r4,r4,r5 /* BUS ticks */ ++1: mftbu r5 ++ mftb r6 ++ mftbu r7 ++ cmp 0,r5,r7 ++ bne 1b /* Get [synced] base time */ ++ addc r9,r6,r4 /* Compute end time */ ++ addze r8,r5 ++2: mftbu r5 ++ cmp 0,r5,r8 ++ blt 2b ++ bgt 3f ++ mftb r6 ++ cmp 0,r6,r9 ++ blt 2b ++#if 1 ++3: ++#else ++ /* Check RAM */ ++ /* set start address(0x00000000) */ ++3: xor r4,r4,r4 ++ lis r5, RAM_SIZE@h ++ ori r5, r5, RAM_SIZE@l ++ lis r6, 0xaaaa /* mask pattern a */ ++ ori r6, r6, 0xaaaa ++ lis r7, 0x5555 /* mask pattern b */ ++ ori r7, r7, 0x5555 ++ lis r8, 0x0000 /* check step size */ ++ ori r8, r8, 0x0100 ++check_ram_loop: ++ cmp 0,r4,r5 ++ beq check_ram_end ++ stw r6,0(r4) ++ isync ++ lwz r3,0(r4) ++ isync ++ cmp 0,r3,r6 ++ bne ram_error ++ stw r7,0x00fc(r4) ++ isync ++ lwz r3,0x00fc(r4) ++ isync ++ cmp 0,r3,r7 ++ bne ram_error ++ add r4,r4,r8 ++ b check_ram_loop ++ram_error: ++#if defined(CONFIG_LAN) ++ WM8(UART1,0x39) /* ram error */ ++#elif defined(CONFIG_HGLAN) ||defined(CONFIG_HLAN) || defined(CONFIG_HTGL) ++ WM8(UART1,0x6F) /* ram error */ ++#endif ++ b ram_error ++check_ram_end: ++#endif /* #if 1 */ ++#endif /* !defined (CFG_RAMBOOT) */ ++ ++/* The instruction cache is enabled and the data cache is disabled */ ++ blr +diff -urN u-boot-86xx/board/linkstation/firminfo.h u-boot-86xx-kuro_clean/board/linkstation/firminfo.h +--- u-boot-86xx/board/linkstation/firminfo.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/firminfo.h 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,27 @@ ++#define FIRMNAME_MAX 31 ++#define SUBVERSION_MAX 31 ++#define FIRMINFO_VER 1 ++ ++struct firminfo { ++ unsigned long info_ver; ++ unsigned long firmid; ++ char firmname[FIRMNAME_MAX+1]; ++ char subver[SUBVERSION_MAX+1]; ++ unsigned short ver_major; ++ unsigned short ver_minor; ++ unsigned short build; ++ char year; ++ char mon; ++ char day; ++ char hour; ++ char min; ++ char sec; ++ unsigned long size; ++ unsigned long chksum; ++ ++ unsigned long kernel_offset; ++ unsigned long kernel_size; ++ unsigned long initrd_offset; ++ unsigned long initrd_size; ++ } __attribute((aligned(4))); ++// ---------------------------------------------------- +diff -urN u-boot-86xx/board/linkstation/flash.c u-boot-86xx-kuro_clean/board/linkstation/flash.c +--- u-boot-86xx/board/linkstation/flash.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/flash.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,893 @@ ++/* ++ * flash.c ++ * ++ * Flash device interface for LinkStation ++ * Supports CFI flash devices using the AMD standard command set ++ * ++ * Copyright (C) 2006 Mihai Georgin <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * Based on the MTD code from the Linux kernel ++ * ++ * Based on include/melco/flashd.c (linux-2.4.17_mvl21-sandpoint) ++ * Copyright (C) 2001-2004 BUFFALO INC. ++ */ ++#include <common.h> ++#include <asm/io.h> ++#include <mpc824x.h> ++ ++#if 0 ++#define DEBUG_CFI ++#endif ++ ++#undef debug ++#ifdef DEBUG_CFI ++#define debug(fmt,args...) printf(fmt,##args) ++#else ++#define debug(fmt,args...) ++#endif /* DEBUG_CFI */ ++ ++#if CFG_MAX_FLASH_BANKS > 1 ++#error Only 1 flash bank supported ++#endif ++ ++#define perror(fmt,args...) printf("%s: ",__FUNCTION__);printf(fmt,##args) ++ ++#define MAX_ERASE_REGIONS 4 ++ ++#define P_ID_NONE 0 ++#define P_ID_INTEL_EXT 1 ++#define P_ID_AMD_STD 2 ++#define P_ID_INTEL_STD 3 ++#define P_ID_AMD_EXT 4 ++#define P_ID_MITSUBISHI_STD 256 ++#define P_ID_MITSUBISHI_EXT 257 ++#define P_ID_RESERVED 65535 ++ ++#define CFI_DEVICETYPE_X8 (8 / 8) ++#define CFI_DEVICETYPE_X16 (16 / 8) ++ ++#define FLASH_DATA_MASK 0xFF ++ ++#define FUJ_MANUFACT_LS (FUJ_MANUFACT & FLASH_DATA_MASK) ++#define STM_MANUFACT_LS (STM_MANUFACT & FLASH_DATA_MASK) ++#define MX_MANUFACT_LS (MX_MANUFACT & FLASH_DATA_MASK) ++ ++/* Unknown manufacturer */ ++#define FLASH_MAN_UNKNOWN 0xFFFF0000 ++ ++/* Fujitsu MBM29PL320MT which is using the same */ ++/* codes as the AMD Am29LV320MT "mirror" flash */ ++#define AMD_ID_MIRROR_LS (AMD_ID_MIRROR & FLASH_DATA_MASK) ++#define AMD_ID_LV320T_2_LS (AMD_ID_LV320T_2 & FLASH_DATA_MASK) ++#define AMD_ID_LV320T_3_LS (AMD_ID_LV320T_3 & FLASH_DATA_MASK) ++ ++/* ST Micro M29W320DT and M29W320DB */ ++#define STM_ID_29W320DT_LS (STM_ID_29W320DT & FLASH_DATA_MASK) ++#define STM_ID_29W320DB_LS (STM_ID_29W320DB & FLASH_DATA_MASK) ++ ++/* ST Micro M29DW324DT and M29DW324DB */ ++#define STM_ID_29W324DT_LS (STM_ID_29W324DT & FLASH_DATA_MASK) ++#define STM_ID_29W324DB_LS (STM_ID_29W324DB & FLASH_DATA_MASK) ++ ++/* Macronix MX29LV320T */ ++#define MX_ID_LV320T_LS (MX_ID_LV320T & FLASH_DATA_MASK) ++ ++/* Basic Query Structure */ ++struct cfi_ident { ++ __u8 qry[3]; ++ __u16 P_ID; ++ __u16 P_ADR; ++ __u16 A_ID; ++ __u16 A_ADR; ++ __u8 VccMin; ++ __u8 VccMax; ++ __u8 VppMin; ++ __u8 VppMax; ++ __u8 WordWriteTimeoutTyp; ++ __u8 BufWriteTimeoutTyp; ++ __u8 BlockEraseTimeoutTyp; ++ __u8 ChipEraseTimeoutTyp; ++ __u8 WordWriteTimeoutMax; ++ __u8 BufWriteTimeoutMax; ++ __u8 BlockEraseTimeoutMax; ++ __u8 ChipEraseTimeoutMax; ++ __u8 DevSize; ++ __u16 InterfaceDesc; ++ __u16 MaxBufWriteSize; ++ __u8 NumEraseRegions; ++ __u32 EraseRegionInfo[MAX_ERASE_REGIONS]; ++} __attribute__((packed)); ++ ++struct cfi_private { ++ __u32 base; ++ int device_type; ++ int addr_unlock1; ++ int addr_unlock2; ++ struct cfi_ident *cfiq; ++ int mfr; ++ int id[3]; /* Supports AMD MirrorBit flash */ ++ char *flash_name; ++ int wrd_wr_time; ++ int buf_wr_time; ++ int erase_time; ++ int (*blk_erase)(flash_info_t *info, int s_first, int s_last); ++ int (*blk_write)(flash_info_t *info, __u8 *buf, __u32 addr, int sz); ++}; ++ ++static inline __u8 cfi_read8(__u32 addr) ++{ ++ return (*(volatile __u8 *)(addr)); ++} ++ ++static inline void cfi_write8(__u8 val, __u32 addr) ++{ ++ *(volatile __u8 *)(addr) = val; ++ sync(); ++} ++ ++/* ++ * Sends a CFI command to a bank of flash for the given type. ++ * Returns the offset to the sent command ++ */ ++static inline __u32 cfi_cmd(__u8 cmd, __u32 cmd_addr, __u32 base, int type) ++{ ++ __u32 addr; ++ ++ addr = base + cmd_addr * type; ++ if (cmd_addr * type == 0x554) ++ ++addr; ++ ++ cfi_write8(cmd, addr); ++ ++ return addr - base; ++} ++ ++static inline __u8 cfi_read_query(__u32 addr) ++{ ++ return cfi_read8(addr); ++} ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++static struct cfi_private cfis; ++static struct cfi_ident cfi_idents; ++static struct cfi_private *cfi; ++ ++static int cfi_probe_chip(struct cfi_private *cfi); ++static unsigned long cfi_amdstd_setup(struct cfi_private *cfi, int primary); ++static void print_cfi_ident(struct cfi_ident *); ++static int flash_amdstd_erase(flash_info_t *info, int s_first, int s_last); ++static int flash_amdstd_wbuff(flash_info_t *info, __u8 *buf, __u32 addr,int sz); ++static int flash_amdstd_wubyp(flash_info_t *info, __u8 *buf, __u32 addr,int sz); ++static int flash_amdstd_write(flash_info_t *info, __u8 *buf, __u32 addr,int sz); ++ ++ ++ ++unsigned long flash_init(void) ++{ ++ unsigned long flash_size; ++ __u16 type; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ cfi = &cfis; ++ memset(cfi, 0, sizeof(struct cfi_private)); ++ ++ cfi->base = CFG_FLASH_BASE; ++ ++ /* Identify CFI chip */ ++ /* Probe for X8 device first */ ++ cfi->device_type = CFI_DEVICETYPE_X8; ++ if (cfi_probe_chip(cfi)) { ++ /* The probe didn't like it */ ++ /* so probe for X16/X8 device */ ++ cfi->device_type = CFI_DEVICETYPE_X16; ++ if (cfi_probe_chip(cfi)) { ++ /* The probe didn't like it */ ++ return 0UL; ++ } ++ } ++ ++ /* Check if it is AMD standard cmd set */ ++ type = cfi->cfiq->P_ID; ++ if (type == P_ID_AMD_STD) ++ flash_size = cfi_amdstd_setup(cfi, 1); ++ else { ++ perror("Primary cmd set is not AMD std. Trying alternate.\n"); ++ flash_size = 0; ++ } ++ if (!flash_size) { ++ type = cfi->cfiq->A_ID; ++ if (type == P_ID_AMD_STD) ++ flash_size = cfi_amdstd_setup(cfi, 0); ++ else { ++ perror("Alternate cmd set is not AMD std.\n"); ++ return 0UL; ++ } ++ } ++ ++ if (flash_size && flash_size == 4*1024*1024) { ++ /* Flash protection ON by default */ ++ flash_protect(FLAG_PROTECT_SET, cfi->base, cfi->base+flash_size-1, flash_info); ++ ++ return flash_size; ++ } ++ ++ if (flash_size) { ++ perror("Unsupported flash size: %d\n", flash_size); ++ } else { ++ perror("Vendor Command Set not supported\n"); ++ printf("Primary: 0x%04X, Alternate: 0x%04X\n", ++ cfi->cfiq->P_ID, cfi->cfiq->A_ID); ++ } ++ return 0UL; ++} ++ ++void flash_print_info(flash_info_t *info) ++{ ++ int i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ printf("Flash chip: %s\n\n", ++ cfi->flash_name?cfi->flash_name:"UNKNOWN"); ++ print_cfi_ident(cfi->cfiq); ++ printf("\nActual values used by U-Boot:\n"); ++ printf("Word write timeout: %6d ms\n", cfi->wrd_wr_time); ++ printf("Buffer write timeout: %6d ms\n", cfi->buf_wr_time); ++ printf("Sector erase timeout: %6d ms\n", cfi->erase_time); ++ printf("\nSize: %ld MiB in %d Sectors\n",info->size>>20,info->sector_count); ++ printf (" Sector Start Addresses:"); ++ for (i=0; i<info->sector_count; i++) { ++ if (!(i % 5)) ++ printf ("\n "); ++ printf (" %08lX%s", info->start[i], info->protect[i]?" (RO)" : " (RW)"); ++ } ++ printf ("\n"); ++} ++ ++int flash_erase(flash_info_t *info, int s_first, int s_last) ++{ ++ return (*(cfi->blk_erase))(info, s_first, s_last); ++} ++ ++int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) ++{ ++ return (*(cfi->blk_write))(info, src, addr, cnt); ++} ++ ++static int cfi_probe_chip(struct cfi_private *cfi) ++{ ++ int ofs_factor = cfi->device_type; ++ __u32 base = cfi->base; ++ int num_erase_regions, scount; ++ int i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ cfi_cmd(0x98, 0x55, base, cfi->device_type); ++ ++ if (cfi_read8(base + ofs_factor * 0x10) != 'Q' || ++ cfi_read8(base + ofs_factor * 0x11) != 'R' || ++ cfi_read8(base + ofs_factor * 0x12) != 'Y') { ++ debug("Not a CFI flash\n"); ++ /* Put the chip back into read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ return -1; ++ } ++ ++ num_erase_regions = cfi_read_query(base + 0x2C * ofs_factor); ++ if (!num_erase_regions) { ++ perror("No erase regions\n"); ++ /* Put the chip back into read read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ return -1; ++ } ++ if (num_erase_regions > MAX_ERASE_REGIONS) { ++ perror("Number of erase regions (%d) > MAX_ERASE_REGIONS (%d)\n", ++ num_erase_regions, MAX_ERASE_REGIONS); ++ /* Put the chip back into read read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ return -1; ++ } ++ ++ cfi->cfiq = &cfi_idents; ++ memset(cfi->cfiq, 0, sizeof(struct cfi_ident)); ++ debug("cfi->cfiq: 0x%08X\n", cfi->cfiq); ++ ++ /* Read the CFI info structure */ ++ for (i=0; i < sizeof(struct cfi_ident) + num_erase_regions * 4; i++) ++ ((__u8 *)cfi->cfiq)[i] = cfi_read_query(base + (0x10 + i) * ofs_factor); ++ ++ /* Do any necessary byteswapping */ ++ cfi->cfiq->P_ID = __le16_to_cpu(cfi->cfiq->P_ID); ++ cfi->cfiq->P_ADR = __le16_to_cpu(cfi->cfiq->P_ADR); ++ cfi->cfiq->A_ID = __le16_to_cpu(cfi->cfiq->A_ID); ++ cfi->cfiq->A_ADR = __le16_to_cpu(cfi->cfiq->A_ADR); ++ cfi->cfiq->InterfaceDesc = __le16_to_cpu(cfi->cfiq->InterfaceDesc); ++ cfi->cfiq->MaxBufWriteSize = __le16_to_cpu(cfi->cfiq->MaxBufWriteSize); ++ ++#if 0 ++ /* Dump the information therein */ ++ print_cfi_ident(cfi->cfiq); ++#endif ++ ++ scount = 0; ++ for (i=0; i<cfi->cfiq->NumEraseRegions; i++) { ++ cfi->cfiq->EraseRegionInfo[i] = __le32_to_cpu(cfi->cfiq->EraseRegionInfo[i]); ++ scount += (cfi->cfiq->EraseRegionInfo[i] & 0xFFFF) + 1; ++ debug(" Erase Region #%d: sector size 0x%4.4X bytes, %d sectors\n", ++ i, (cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xFF, ++ (cfi->cfiq->EraseRegionInfo[i] & 0xFFFF) + 1); ++ } ++ /* Put it back into Read Mode */ ++ cfi_cmd(0xF0, 0, base, cfi->device_type); ++ ++ if (scount > CFG_MAX_FLASH_SECT) { ++ perror("Number of sectors (%d) > CFG_MAX_FLASH_SECT (%d)\n", ++ scount, CFG_MAX_FLASH_SECT); ++ return -1; ++ } ++ ++ debug("Found x%d device in 8-bit mode\n", cfi->device_type*8); ++ ++ return 0; ++} ++ ++static char *vendorname(__u16 vendor) ++{ ++ switch (vendor) { ++ case P_ID_NONE: ++ return "None"; ++ case P_ID_INTEL_EXT: ++ return "Intel/Sharp Extended"; ++ case P_ID_AMD_STD: ++ return "AMD/Fujitsu Standard"; ++ case P_ID_INTEL_STD: ++ return "Intel/Sharp Standard"; ++ case P_ID_AMD_EXT: ++ return "AMD/Fujitsu Extended"; ++ case P_ID_MITSUBISHI_STD: ++ return "Mitsubishi Standard"; ++ case P_ID_MITSUBISHI_EXT: ++ return "Mitsubishi Extended"; ++ case P_ID_RESERVED: ++ return "Not Allowed / Reserved for Future Use"; ++ default: ++ return "Unknown"; ++ } ++} ++ ++static void print_cfi_ident(struct cfi_ident *cfip) ++{ ++ printf("CFI Query Results:\n"); ++ printf("Primary Vendor Command Set: 0x%4.4X (%s)\n", ++ cfip->P_ID, vendorname(cfip->P_ID)); ++ if (cfip->P_ADR) ++ printf("Primary Algorithm Table at 0x%4.4X\n", cfip->P_ADR); ++ else ++ printf("No Primary Algorithm Table\n"); ++ ++ printf("Alternate Vendor Command Set: 0x%4.4X (%s)\n", ++ cfip->A_ID, vendorname(cfip->A_ID)); ++ if (cfip->A_ADR) ++ printf("Alternate Algorithm Table at 0x%4.4X\n", cfip->A_ADR); ++ else ++ printf("No Alternate Algorithm Table\n"); ++ ++ printf("Vcc Min.: %d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xF); ++ printf("Vcc Max.: %d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xF); ++ if (cfip->VppMin) { ++ printf("Vpp Min.: %d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xF); ++ printf("Vpp Max.: %d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xF); ++ } ++ else ++ printf("No Vpp line\n"); ++ ++ printf("Typical byte/word write timeout: %d us\n", ++ 1<<cfip->WordWriteTimeoutTyp); ++ printf("Maximum byte/word write timeout: %d us\n", ++ (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp)); ++ ++ if (cfip->BufWriteTimeoutTyp || cfip->BufWriteTimeoutMax) { ++ printf("Typical full buffer write timeout: %d us\n", ++ 1<<cfip->BufWriteTimeoutTyp); ++ printf("Maximum full buffer write timeout: %d us\n", ++ (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp)); ++ } ++ else ++ printf("Full buffer write not supported\n"); ++ ++ printf("Typical block erase timeout: %d ms\n", ++ 1<<cfip->BlockEraseTimeoutTyp); ++ printf("Maximum block erase timeout: %d ms\n", ++ (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp)); ++ if (cfip->ChipEraseTimeoutTyp || cfip->ChipEraseTimeoutMax) { ++ printf("Typical chip erase timeout: %d ms\n", ++ 1<<cfip->ChipEraseTimeoutTyp); ++ printf("Maximum chip erase timeout: %d ms\n", ++ (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp)); ++ } ++ else ++ printf("Chip erase not supported\n"); ++ ++ printf("Device size: 0x%X bytes (%d MiB)\n", ++ 1 << cfip->DevSize, 1 << (cfip->DevSize - 20)); ++ printf("Flash Device Interface description: 0x%4.4X\n",cfip->InterfaceDesc); ++ switch(cfip->InterfaceDesc) { ++ case 0: ++ printf(" - x8-only asynchronous interface\n"); ++ break; ++ case 1: ++ printf(" - x16-only asynchronous interface\n"); ++ break; ++ case 2: ++ printf(" - x8 / x16 via BYTE# with asynchronous interface\n"); ++ break; ++ case 3: ++ printf(" - x32-only asynchronous interface\n"); ++ break; ++ case 65535: ++ printf(" - Not Allowed / Reserved\n"); ++ break; ++ default: ++ printf(" - Unknown\n"); ++ break; ++ } ++ printf("Max. bytes in buffer write: %d\n", 1 << cfip->MaxBufWriteSize); ++ printf("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions); ++} ++ ++static unsigned long cfi_amdstd_setup(struct cfi_private *cfi, int primary) ++{ ++ flash_info_t *info = &flash_info[0]; ++ __u32 base = cfi->base; ++ int ofs_factor = cfi->device_type; ++ __u32 addr_et = primary?cfi->cfiq->P_ADR:cfi->cfiq->A_ADR; ++ __u8 major, minor, bootloc; ++ __u32 offset, ernum, ersize; ++ int i, j; ++ ++ /* Put the chip into read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ /* Autoselect */ ++ cfi_cmd(0xAA, 0x555, base, cfi->device_type); ++ cfi_cmd(0x55, 0x2AA, base, cfi->device_type); ++ cfi_cmd(0x90, 0x555, base, cfi->device_type); ++ /* Read manufacturer and device id */ ++ cfi->mfr = cfi_read_query(base + 0x00 * ofs_factor); ++ if ((cfi->id[0] = cfi_read_query(base + 0x01 * ofs_factor)) == 0x7E) { ++ cfi->id[1] = cfi_read_query(base + 0x0E * ofs_factor); ++ cfi->id[2] = cfi_read_query(base + 0x0F * ofs_factor); ++ } ++ /* Put the chip into read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ ++ /* Put the chip into read query mode */ ++ cfi_cmd(0x98, 0x55, base, cfi->device_type); ++ /* Find the boot block location and swap the erase regions as necessary */ ++ major = cfi_read_query(base + (addr_et + 3) * ofs_factor); ++ minor = cfi_read_query(base + (addr_et + 4) * ofs_factor); ++ debug(" Amd/Fujitsu Extended Query Table v%c.%c at 0x%4.4X\n", ++ major, minor, addr_et); ++ ++ if (((major << 8) | minor) < 0x3131) { ++ /* CFI version 1.0 => don't trust bootloc */ ++ if (cfi->id[0] & 0x80) { ++ printf("Device ID is 0x%02X. Assuming broken CFI table.\n", ++ cfi->id[0]); ++ bootloc = 3; /* top boot */ ++ } else ++ bootloc = 2; /* bottom boot */ ++ } else ++ bootloc = cfi_read_query(base + (addr_et + 0xF) * ofs_factor); ++ ++ if (bootloc == 3 && cfi->cfiq->NumEraseRegions > 1) { ++ debug("Top boot block. Swapping erase regions.\n"); ++ for (i=0; i<cfi->cfiq->NumEraseRegions / 2; i++) { ++ int j = (cfi->cfiq->NumEraseRegions-1)-i; ++ __u32 swap; ++ ++ swap = cfi->cfiq->EraseRegionInfo[i]; ++ cfi->cfiq->EraseRegionInfo[i] = cfi->cfiq->EraseRegionInfo[j]; ++ cfi->cfiq->EraseRegionInfo[j] = swap; ++ } ++ } ++ ++ /* Put the chip into read array mode */ ++ cfi_cmd(0xF0, 0x00, base, cfi->device_type); ++ ++ switch (cfi->device_type) { ++ case CFI_DEVICETYPE_X8: ++ /* X8 chip */ ++ cfi->addr_unlock1 = 0x555; ++ cfi->addr_unlock2 = 0x2AA; ++ break; ++ case CFI_DEVICETYPE_X16: ++ /* X16 chip in X8 mode */ ++ cfi->addr_unlock1 = 0xAAA; ++ cfi->addr_unlock2 = 0x555; ++ break; ++ default: ++ perror("Unsupported device type %d\n", cfi->device_type); ++ return 0UL; ++ } ++ ++ cfi->wrd_wr_time = 1 << cfi->cfiq->WordWriteTimeoutTyp; ++ cfi->wrd_wr_time *= 1 << cfi->cfiq->WordWriteTimeoutMax; ++ /* Word write time is in us, convert to ms */ ++ cfi->wrd_wr_time = cfi->wrd_wr_time / 1000 + 1; ++ if (cfi->wrd_wr_time == 1) ++ /* Account for the timer resolution which is 1 ms */ ++ cfi->wrd_wr_time = 2; ++ cfi->buf_wr_time = 1 << cfi->cfiq->BufWriteTimeoutTyp; ++ cfi->buf_wr_time *= 1 << cfi->cfiq->BufWriteTimeoutMax; ++ /* Buffer write time is in us, convert to ms */ ++ cfi->buf_wr_time = cfi->buf_wr_time / 1000 + 1; ++ if (cfi->buf_wr_time == 1) ++ /* Account for the timer resolution which is 1 ms */ ++ cfi->buf_wr_time = 2; ++ cfi->erase_time = 1 << cfi->cfiq->BlockEraseTimeoutTyp; ++ cfi->erase_time *= 1 << cfi->cfiq->BlockEraseTimeoutMax; ++ ++ info->size = (1 << cfi->cfiq->DevSize); ++ ++ info->sector_count = 0; ++ offset = CFG_FLASH_BASE; ++ for (i=0; i < cfi->cfiq->NumEraseRegions; i++) { ++ ersize = ((cfi->cfiq->EraseRegionInfo[i] >> 8) & ~0xFF); ++ ernum = (cfi->cfiq->EraseRegionInfo[i] & 0xFFFF) + 1; ++ ++ for (j=0; j < ernum; j++) { ++ info->start[info->sector_count + j] = offset; ++ offset += ersize; ++ } ++ ++ info->sector_count += ernum; ++ } ++ ++ switch (cfi->mfr) { ++ case FUJ_MANUFACT_LS: ++ info->flash_id = FLASH_MAN_FUJ; ++ switch (cfi->id[0]) { ++ case AMD_ID_MIRROR_LS: ++ if (cfi->id[1] == AMD_ID_LV320T_2_LS && ++ cfi->id[2] == AMD_ID_LV320T_3_LS) { ++ info->flash_id += FLASH_AMLV320T; ++ cfi->blk_write = flash_amdstd_wbuff; ++ cfi->flash_name = "FUJITSU MBM29PL32TM"; ++ } else ++ info->flash_id += FLASH_UNKNOWN; ++ break; ++ default: ++ info->flash_id += FLASH_UNKNOWN; ++ break; ++ } ++ break; ++ case STM_MANUFACT_LS: ++ info->flash_id = FLASH_MAN_STM; ++ switch (cfi->id[0]) { ++ case STM_ID_29W320DT_LS: ++ info->flash_id += FLASH_STMW320DT; ++ cfi->blk_write = flash_amdstd_wubyp; ++ cfi->flash_name = "STMICRO M29W320DT"; ++ break; ++ case STM_ID_29W320DB_LS: ++ info->flash_id += FLASH_STMW320DB; ++ cfi->blk_write = flash_amdstd_wubyp; ++ cfi->flash_name = "STMICRO M29W320DB"; ++ break; ++ case STM_ID_29W324DT_LS: ++ info->flash_id += FLASH_STMW324DT; ++ cfi->blk_write = flash_amdstd_wubyp; ++ cfi->flash_name = "STMICRO M29W324DT"; ++ break; ++ case STM_ID_29W324DB_LS: ++ info->flash_id += FLASH_STMW324DB; ++ cfi->blk_write = flash_amdstd_wubyp; ++ cfi->flash_name = "STMICRO M29W324DB"; ++ break; ++ default: ++ info->flash_id += FLASH_UNKNOWN; ++ break; ++ } ++ break; ++ case MX_MANUFACT_LS: ++ info->flash_id = FLASH_MAN_MX; ++ switch (cfi->id[0]) { ++ case MX_ID_LV320T_LS: ++ info->flash_id += FLASH_MXLV320T; ++ cfi->blk_write = flash_amdstd_write; ++ cfi->flash_name = "MXIC MX29LV320T"; ++ break; ++ default: ++ info->flash_id += FLASH_UNKNOWN; ++ break; ++ } ++ break; ++ default: ++ info->flash_id = FLASH_AMD_COMP; ++ break; ++ } ++ ++ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_UNKNOWN) { ++ /* Unknown but supported CFI flash */ ++ cfi->flash_name = NULL; ++ if (cfi->cfiq->MaxBufWriteSize) ++ cfi->blk_write = flash_amdstd_wbuff; ++ else ++ cfi->blk_write = flash_amdstd_write; ++ } ++ ++ cfi->blk_erase = flash_amdstd_erase; ++ ++ return info->size; ++} ++ ++#define BIT(x) (1<<x) ++/* ++ * Check the flash command state ++ */ ++static int flash_amdstd_state(__u32 addr, __u32 target, int timeout) ++{ ++ __u32 start_time = get_timer(0); ++ __u32 data; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ do { ++ data = cfi_read8(addr); ++ if((data & BIT(7)) == (target & BIT(7))) ++ return 0; ++ if(data & BIT(5)) { ++ data = cfi_read8(addr); ++ if((data & BIT(7)) == (target & BIT(7))) ++ return 0; ++ else ++ return -1; ++ } ++ } while (get_timer(start_time) < timeout); ++ return -1; ++} ++ ++/* ++ * Verify data written to flash ++ */ ++static int flash_amdstd_vrfy(flash_info_t *info, __u8 *buf, __u32 addr, int sz) ++{ ++ __u32 base = cfi->base; ++ __u8 *faddr; ++ long i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ faddr = (__u8 *)addr; ++ for(i=0; i < sz; i++) { ++ if(faddr[i] != buf[i]) { ++ printf("Flash Write verify fail at %08x. ", &faddr[i]); ++ printf("Expecting: %02X, Actual: %02X\n", faddr[i], buf[i]); ++ printf("Retrying..."); ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0xA0, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_write8(buf[i], (__u32)&faddr[i]); ++ if (flash_amdstd_state((__u32)&faddr[i], buf[i], cfi->wrd_wr_time)) { ++ printf("failed again\n"); ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ return 1; ++ } else ++ printf("suceeded\n"); ++ } ++ } ++ return 0; ++} ++ ++/* ++ * Erase flash sectors ++ */ ++static int flash_amdstd_erase(flash_info_t *info, int s_first, int s_last) ++{ ++ int prot, sect, nsect, flag; ++ __u32 l_sect; ++ __u32 base = cfi->base; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ if (!info->size) { ++ printf ("Flash erase: Can't erase unsupported flash\n"); ++ return 1; ++ } ++ ++ if (s_first < 0 || s_first > s_last || ++ s_first > (info->sector_count - 1) || ++ s_last > (info->sector_count - 1)) { ++ printf ("Flash erase: no sectors to erase\n"); ++ return 1; ++ } ++ ++ printf("\nFlash erase: first = %d @ 0x%08lx\n", ++ s_first, info->start[s_first]); ++ printf(" last = %d @ 0x%08lx\n", s_last, info->start[s_last]); ++ ++ nsect = s_last - s_first + 1; ++ for (prot = 0, sect=s_first; sect<=s_last; ++sect) ++ if (info->protect[sect]) ++ prot++; ++ if (prot) { ++ if (prot == nsect) { ++ printf("Warning: All requested sectors are protected!\n"); ++ printf(" No sectors to erase\n"); ++ return 1; ++ } ++ else ++ printf("Warning: %d protected sectors will not be erased!\n", prot); ++ } ++ cfi_cmd(0xF0, 0x00, base, CFI_DEVICETYPE_X8); ++ udelay(1000); ++ ++ /* Disable interrupts which might cause a timeout here */ ++ flag = disable_interrupts(); ++ ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x80, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ for (sect = s_first; sect <= s_last; sect++) ++ if (!info->protect[sect]) { ++ l_sect = info->start[sect]; ++ cfi_write8(0x30, l_sect); ++ } ++ /* Erase begins 50us after the last sector address */ ++ udelay(50); ++ ++ /* All erase commands sent, enable interrupts */ ++ if (flag) ++ enable_interrupts(); ++ ++ if (flash_amdstd_state(l_sect, 0xff, cfi->erase_time * nsect)) { ++ printf("Flash erase: Timeout\n"); ++ cfi_cmd(0xF0, 0x00, base, CFI_DEVICETYPE_X8); ++ return 1; ++ } ++ printf("Flash erase: Done\n"); ++ return 0; ++} ++ ++/* ++ * Write to flash using Write Buffer programming ++ */ ++static int flash_amdstd_wbuff(flash_info_t *info, __u8 *buf, __u32 addr, int sz) ++{ ++ __u32 base = cfi->base; ++ __u32 wbufsz; ++ __u32 size, wsize, waddr, saddr; ++ __u8 *wbuf; ++ int i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ size = sz; ++ wbuf = buf; ++ wbufsz = 1 << cfi->cfiq->MaxBufWriteSize; ++ ++ waddr = (addr + wbufsz - 1) & ~(wbufsz - 1); ++ if (waddr > addr) ++ wsize = waddr-addr; ++ else ++ wsize = wbufsz; ++ if (wsize > size) ++ wsize = size; ++ waddr = addr; ++ ++ while (size > 0) { ++ for (i = 0; i < info->sector_count; i++) ++ if (waddr < info->start[i]) ++ break; ++ saddr = info->start[i-1]; ++ ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ cfi_write8(0x25, saddr); ++ cfi_write8(wsize-1, saddr); ++ for (i = 0; i < wsize; i++) ++ cfi_write8(*wbuf++, waddr++); ++ cfi_write8(0x29, saddr); ++ ++ if (flash_amdstd_state(waddr-1, *(wbuf-1), cfi->buf_wr_time)) { ++ printf("Flash write buffer: Timeout\n"); ++ cfi_cmd(0xF0, 0x00, base, CFI_DEVICETYPE_X8); ++ return 1; ++ } ++ ++ size -= wsize; ++ if ((wsize = wbufsz) > size) ++ wsize = size; ++ } ++ ++ return flash_amdstd_vrfy(info, buf, addr, sz); ++} ++ ++/* ++ * Write to flash using Unlock Bypass command sequence ++ */ ++static int flash_amdstd_wubyp(flash_info_t *info, __u8 *buf, __u32 addr, int sz) ++{ ++ __u32 base = cfi->base; ++ __u32 waddr; ++ long i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ waddr = addr; ++ ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x20, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ ++ for(i=0; i < sz; i++) { ++ cfi_write8(0xA0, waddr); ++ cfi_write8(buf[i], waddr); ++ if (flash_amdstd_state(waddr, buf[i], cfi->wrd_wr_time)) { ++ printf("Flash unlock bypass write: Timeout\n"); ++ cfi_cmd(0x90, 0, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x00, 0, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ return 1; ++ } ++ waddr++; ++ } ++ cfi_cmd(0x90, 0, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x00, 0, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ ++ return flash_amdstd_vrfy(info, buf, addr, sz); ++} ++ ++/* ++ * Write to flash using Word/Byte Program command sequence ++ */ ++static int flash_amdstd_write(flash_info_t *info, __u8 *buf, __u32 addr, int sz) ++{ ++ __u32 base = cfi->base; ++ __u32 waddr; ++ long i; ++ ++ debug("%s\n", __FUNCTION__); ++ ++ waddr = addr; ++ ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ for (i = 0; i < sz; i++) { ++ cfi_cmd(0xAA, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0x55, cfi->addr_unlock2, base, CFI_DEVICETYPE_X8); ++ cfi_cmd(0xA0, cfi->addr_unlock1, base, CFI_DEVICETYPE_X8); ++ cfi_write8(buf[i], waddr); ++ if (flash_amdstd_state(waddr, buf[i], cfi->wrd_wr_time)) { ++ printf("Flash write: Timeout\n"); ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ return 1; ++ } ++ waddr++; ++ } ++ cfi_cmd(0xF0, 0, base, CFI_DEVICETYPE_X8); ++ ++ return flash_amdstd_vrfy(info, buf, addr, sz); ++} ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/hwctl.c u-boot-86xx-kuro_clean/board/linkstation/hwctl.c +--- u-boot-86xx/board/linkstation/hwctl.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/hwctl.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,258 @@ ++/* ++ * hwctl.c ++ * ++ * LinkStation HW Control Driver ++ * ++ * Copyright (C) 2001-2004 BUFFALO INC. ++ * ++ * This software may be used and distributed according to the terms of ++ * the GNU General Public License (GPL), incorporated herein by reference. ++ * Drivers based on or derived from this code fall under the GPL and must ++ * retain the authorship, copyright and license notice. This file is not ++ * a complete program and may only be used when the entire operating ++ * system is licensed under the GPL. ++ * ++ */ ++ ++#include <config.h> ++#include <common.h> ++#include <command.h> ++ ++#define mdelay(n) udelay((n)*1000) ++ ++#define AVR_PORT CFG_NS16550_COM2 ++extern void udelay(unsigned long usec); ++ ++ ++// output BYTE data ++static inline void out_b(volatile unsigned char *addr, int val) ++{ ++ __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); ++} ++ ++#if 0 ++// PWR,DISK_FULL/STATUS,DIAG LED controll ++void blink_led(unsigned char state) ++{ ++#ifdef CONFIG_HTGL ++ switch (state) ++ { ++ case FLASH_CLEAR_START: ++ case FLASH_UPDATE_START: ++ out_b(AVR_PORT, 0x61); ++ out_b(AVR_PORT, 0x61); ++ out_b(AVR_PORT, 0x38); ++ out_b(AVR_PORT, 0x30); ++ out_b(AVR_PORT, 0x34); ++ out_b(AVR_PORT, 0x31); ++ mdelay(10); ++ out_b(AVR_PORT, 0x61); ++ out_b(AVR_PORT, 0x61); ++ out_b(AVR_PORT, 0x38); ++ out_b(AVR_PORT, 0x31); ++ out_b(AVR_PORT, 0x34); ++ out_b(AVR_PORT, 0x31); ++ mdelay(10); ++ out_b(AVR_PORT, 0x71); ++ out_b(AVR_PORT, 0x71); ++// out_b(AVR_PORT, 0x71); ++// out_b(AVR_PORT, 0x71); ++ mdelay(10); ++ out_b(AVR_PORT, 0x73); ++ out_b(AVR_PORT, 0x73); ++// out_b(AVR_PORT, 0x73); ++// out_b(AVR_PORT, 0x73); ++ mdelay(10); ++ break; ++ case FLASH_CLEAR_END: ++ case FLASH_UPDATE_END: ++ out_b(AVR_PORT, 0x70); ++ out_b(AVR_PORT, 0x70); ++// out_b(AVR_PORT, 0x70); ++// out_b(AVR_PORT, 0x70); ++ mdelay(10); ++ out_b(AVR_PORT, 0x72); ++ out_b(AVR_PORT, 0x72); ++// out_b(AVR_PORT, 0x72); ++// out_b(AVR_PORT, 0x72); ++ mdelay(10); ++ break; ++ case RAID_RESYNC_START: ++ break; ++ case RAID_RESYNC_END: ++ break; ++ default: ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++ break; ++ } ++#else ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++ out_b(AVR_PORT, state); ++#endif ++ ++} ++#endif ++ ++// 2005.5.10 BUFFALO add ++//-------------------------------------------------------------- ++static inline void miconCntl_SendUart(unsigned char dat) ++{ ++ out_b((char *)AVR_PORT, dat); ++ udelay(1000); ++} ++ ++//-------------------------------------------------------------- ++void miconCntl_SendCmd(unsigned char dat) ++{ ++ int i; ++ ++ for (i=0; i<4; i++){ ++ miconCntl_SendUart(dat); ++ } ++} ++ ++//-------------------------------------------------------------- ++void miconCntl_FanLow(void) ++{ ++ debug("%s\n",__FUNCTION__); ++#ifdef CONFIG_HTGL ++ miconCntl_SendCmd(0x5C); ++#endif ++} ++//-------------------------------------------------------------- ++void miconCntl_FanHigh(void) ++{ ++ debug("%s\n",__FUNCTION__); ++#ifdef CONFIG_HTGL ++ miconCntl_SendCmd(0x5D); ++#endif ++} ++ ++//-------------------------------------------------------------- ++//1000Mbps ++void miconCntl_Eth1000M(int up) ++{ ++ debug("%s (%d)\n",__FUNCTION__,up); ++#ifdef CONFIG_HTGL ++ if (up){ ++ miconCntl_SendCmd(0x93); ++ }else{ ++ miconCntl_SendCmd(0x92); ++ } ++#else ++ if (up){ ++ miconCntl_SendCmd(0x5D); ++ }else{ ++ miconCntl_SendCmd(0x5C); ++ } ++#endif ++} ++//-------------------------------------------------------------- ++//100Mbps ++void miconCntl_Eth100M(int up) ++{ ++ debug("%s (%d)\n",__FUNCTION__,up); ++#ifdef CONFIG_HTGL ++ if (up){ ++ miconCntl_SendCmd(0x91); ++ }else{ ++ miconCntl_SendCmd(0x90); ++ } ++#else ++ if (up){ ++ miconCntl_SendCmd(0x5C); ++ } ++#endif ++} ++//-------------------------------------------------------------- ++//10Mbps ++void miconCntl_Eth10M(int up) ++{ ++ debug("%s (%d)\n",__FUNCTION__,up); ++#ifdef CONFIG_HTGL ++ if (up){ ++ miconCntl_SendCmd(0x8F); ++ }else{ ++ miconCntl_SendCmd(0x8E); ++ } ++#else ++ if (up){ ++ miconCntl_SendCmd(0x5C); ++ } ++#endif ++} ++//-------------------------------------------------------------- ++//�������� ++void miconCntl_5f(void) ++{ ++ debug("%s\n",__FUNCTION__); ++ miconCntl_SendCmd(0x5F); ++ mdelay(100); ++} ++ ++//-------------------------------------------------------------- ++// "reboot start" signal ++void miconCntl_Reboot(void) ++{ ++ debug("%s\n",__FUNCTION__); ++ miconCntl_SendCmd(0x43); ++} ++#if 0 ++//-------------------------------------------------------------- ++// Raid recovery start ++void miconCntl_RadiRecovery(void) ++{ ++ debug("%s\n",__FUNCTION__); ++#ifdef CONFIG_HTGL ++ miconCntl_SendUart(0x61); // a ++ miconCntl_SendUart(0x61); // a ++ miconCntl_SendUart(0x38); // 8 ++ miconCntl_SendUart(0x30); // 0 ++ miconCntl_SendUart(0x34); // 4 ++ miconCntl_SendUart(0x31); // 1 ++ miconCntl_SendCmd(0x71); // q ++#endif ++} ++//-------------------------------------------------------------- ++// Raid recovery finish ++void miconCntl_RadiRecoveryFin(void) ++{ ++ debug("%s\n",__FUNCTION__); ++#ifdef CONFIG_HTGL ++ miconCntl_SendCmd(0x70); ++#endif ++} ++#endif ++ ++// --------------------------------------------------------------- ++// Disable watchdog timer ++void miconCntl_DisWDT(void) ++{ ++ debug("%s\n",__FUNCTION__); ++ miconCntl_SendCmd(0x41); // A ++ miconCntl_SendCmd(0x46); // F ++ miconCntl_SendCmd(0x4A); // J ++ miconCntl_SendCmd(0x3E); // > ++ miconCntl_SendCmd(0x56); // V ++ miconCntl_SendCmd(0x3E); // > ++ miconCntl_SendCmd(0x5A); // Z ++ miconCntl_SendCmd(0x56); // V ++ miconCntl_SendCmd(0x4B); // K ++} ++// --------------------------------------------------------------- ++// U-Boot calls this function ++int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ disable_interrupts(); ++ miconCntl_Reboot(); ++ while (1) ++ miconCntl_SendUart(0x47); /* Wait for reboot */ ++ ++} ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/ide.c u-boot-86xx-kuro_clean/board/linkstation/ide.c +--- u-boot-86xx/board/linkstation/ide.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/ide.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,101 @@ ++/* ++ * (C) Copyright 2000 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++/* ide.c - ide support functions */ ++ ++ ++#include <common.h> ++ ++#ifdef CFG_CMD_IDE ++#include <ata.h> ++#include <ide.h> ++#include <pci.h> ++ ++#define IT8212_PCI_CpuCONTROL 0x5e ++#define IT8212_PCI_PciModeCONTROL 0x50 ++#define IT8212_PCI_IdeIoCONFIG 0x40 ++#define IT8212_PCI_IdeBusSkewCONTROL 0x4c ++#define IT8212_PCI_IdeDrivingCURRENT 0x42 ++ ++extern ulong ide_bus_offset[CFG_IDE_MAXBUS]; ++extern struct pci_controller hose; ++ ++int ide_preinit (void) ++{ ++ int status; ++ pci_dev_t devbusfn; ++ int l; ++ ++ status = 1; ++ for (l = 0; l < CFG_IDE_MAXBUS; l++) { ++ ide_bus_offset[l] = -ATA_STATUS; ++ } ++ devbusfn = pci_find_device (PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0); ++ if (devbusfn == -1) ++ devbusfn = pci_find_device (PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0); ++ if (devbusfn != -1) { ++ status = 0; ++ ++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, ++ (u32 *) &ide_bus_offset[0]); ++ ide_bus_offset[0] &= 0xfffffffe; ++ ide_bus_offset[0] = pci_hose_bus_to_phys(&hose, ++ ide_bus_offset[0] & 0xfffffffe, ++ PCI_REGION_IO); ++ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_2, ++ (u32 *) &ide_bus_offset[1]); ++ ide_bus_offset[1] &= 0xfffffffe; ++ ide_bus_offset[1] = pci_hose_bus_to_phys(&hose, ++ ide_bus_offset[1] & 0xfffffffe, ++ PCI_REGION_IO); ++ } ++ ++ if (pci_find_device (PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, 0) != -1) { ++ pci_write_config_byte(devbusfn, IT8212_PCI_CpuCONTROL, 0x01); ++ pci_write_config_byte(devbusfn, IT8212_PCI_PciModeCONTROL, 0x00); ++ pci_write_config_word(devbusfn, PCI_COMMAND, 0x0047); ++#ifdef CONFIG_IT8212_SECONDARY_ENABLE ++ pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0xA0F3); ++#else ++ pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0x8031); ++#endif ++ pci_write_config_dword(devbusfn, IT8212_PCI_IdeBusSkewCONTROL, 0x02040204); ++// __LS_COMMENT__ BUFFALO changed 2004.11.10 changed for EMI ++ pci_write_config_byte(devbusfn, IT8212_PCI_IdeDrivingCURRENT, 0x36); // 10mA ++// pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x09); // 4mA ++// pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x12); // 6mA ++// pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x24); // 6mA,2mA ++// pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x2D); // 8mA,4mA ++ pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x00); ++ } ++ ++ return (status); ++} ++ ++void ide_set_reset (int flag) { ++ return; ++} ++ ++#endif /* of CONFIG_CMDS_IDE */ ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/linkstation.c u-boot-86xx-kuro_clean/board/linkstation/linkstation.c +--- u-boot-86xx/board/linkstation/linkstation.c 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/linkstation.c 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,127 @@ ++/* ++ * linkstation.c ++ * ++ * Misc LinkStation specific functions ++ * ++ * Copyright (C) 2006 Mihai Georgin <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <version.h> ++#include <common.h> ++#include <mpc824x.h> ++#include <asm/io.h> ++#include <ns16550.h> ++ ++#ifdef CONFIG_PCI ++#include <pci.h> ++#endif ++ ++extern void init_AVR_DUART(void); ++extern void hw_watchdog_reset(void); ++ ++int checkboard (void) ++{ ++ DECLARE_GLOBAL_DATA_PTR; ++ ulong busfreq = get_bus_freq (0); ++ char buf[32]; ++ char *p; ++ bd_t *bd = gd->bd; ++ ++ init_AVR_DUART(); ++ hw_watchdog_reset(); ++ ++ if ((p = getenv ("console_nr")) != NULL) { ++ unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3; ++ ++ bd->bi_baudrate &= ~3; ++ bd->bi_baudrate |= con_nr & 3; ++ } ++ return 0; ++} ++ ++long int initdram (int board_type) ++{ ++ return (get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE)); ++} ++ ++/* ++ * Initialize PCI Devices ++ */ ++#ifdef CONFIG_PCI ++ ++#ifndef CONFIG_PCI_PNP ++ ++static struct pci_config_table pci_linkstation_config_table[] = { ++ /* vendor, device, class */ ++ /* bus, dev, func */ ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */ ++ /* ethernet controller */ ++ pci_cfgfunc_config_device, { PCI_ETH_IOADDR, ++ PCI_ETH_MEMADDR, ++ PCI_COMMAND_IO | ++ PCI_COMMAND_MEMORY | ++ PCI_COMMAND_MASTER }}, ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */ ++ /* ide controller */ ++ pci_cfgfunc_config_device, { PCI_IDE_IOADDR, ++ PCI_IDE_MEMADDR, ++ PCI_COMMAND_IO | ++ PCI_COMMAND_MEMORY | ++ PCI_COMMAND_MASTER }}, ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */ ++ pci_cfgfunc_config_device, { PCI_USB0_IOADDR, ++ PCI_USB0_MEMADDR, ++ PCI_COMMAND_MEMORY | ++ PCI_COMMAND_MASTER }}, ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */ ++ pci_cfgfunc_config_device, { PCI_USB1_IOADDR, ++ PCI_USB1_MEMADDR, ++ PCI_COMMAND_MEMORY | ++ PCI_COMMAND_MASTER }}, ++ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, ++ PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */ ++ pci_cfgfunc_config_device, { PCI_USB2_IOADDR, ++ PCI_USB2_MEMADDR, ++ PCI_COMMAND_MEMORY | ++ PCI_COMMAND_MASTER }}, ++ { } ++}; ++#endif ++ ++struct pci_controller hose = { ++#ifndef CONFIG_PCI_PNP ++ config_table:pci_linkstation_config_table, ++#endif ++}; ++ ++void pci_init_board (void) ++{ ++ pci_mpc824x_init (&hose); ++ ++ /* Reset USB 1.1 */ ++ out_le32(PCI_USB0_MEMADDR+8, 1); ++ out_le32(PCI_USB1_MEMADDR+8, 1); ++ ++} ++#endif /* CONFIG_PCI */ ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/board/linkstation/nc.sh u-boot-86xx-kuro_clean/board/linkstation/nc.sh +--- u-boot-86xx/board/linkstation/nc.sh 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/nc.sh 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,10 @@ ++#! /bin/bash ++ ++[ $# = 1 ] || { echo "Usage: $0 target_ip" >&2 ; exit 1 ; } ++TARGET_IP=$1 ++ ++stty -icanon -echo intr ^T ++#nc -u -l -p 6666 < /dev/null & ++nc -u -p 6666 -v -v ${TARGET_IP} 6666 ++stty icanon echo intr ^C ++ +diff -urN u-boot-86xx/board/linkstation/u-boot.lds u-boot-86xx-kuro_clean/board/linkstation/u-boot.lds +--- u-boot-86xx/board/linkstation/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/board/linkstation/u-boot.lds 2006-11-06 22:05:38.000000000 +0100 +@@ -0,0 +1,138 @@ ++/* ++ * (C) Copyright 2001 ++ * Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_ARCH(powerpc) ++/* ++SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); SEARCH_DIR(/usr/lib/gcc-lib/ppc-linux/3.3.3); ++*/ ++/* Do we need any of these for elf? ++ __DYNAMIC = 0; */ ++SECTIONS ++{ ++ /* Read-only sections, merged into text segment: */ ++ . = + SIZEOF_HEADERS; ++ .interp : { *(.interp) } ++ .hash : { *(.hash) } ++ .dynsym : { *(.dynsym) } ++ .dynstr : { *(.dynstr) } ++ .rel.text : { *(.rel.text) } ++ .rela.text : { *(.rela.text) } ++ .rel.data : { *(.rel.data) } ++ .rela.data : { *(.rela.data) } ++ .rel.rodata : { *(.rel.rodata) } ++ .rela.rodata : { *(.rela.rodata) } ++ .rel.got : { *(.rel.got) } ++ .rela.got : { *(.rela.got) } ++ .rel.ctors : { *(.rel.ctors) } ++ .rela.ctors : { *(.rela.ctors) } ++ .rel.dtors : { *(.rel.dtors) } ++ .rela.dtors : { *(.rela.dtors) } ++ .rel.bss : { *(.rel.bss) } ++ .rela.bss : { *(.rela.bss) } ++ .rel.plt : { *(.rel.plt) } ++ .rela.plt : { *(.rela.plt) } ++ .init : { *(.init) } ++ .plt : { *(.plt) } ++ .text : ++ { ++ cpu/mpc824x/start.o (.text) ++ lib_ppc/board.o (.text) ++ lib_ppc/ppcstring.o (.text) ++ lib_generic/vsprintf.o (.text) ++ lib_generic/crc32.o (.text) ++ lib_generic/zlib.o (.text) ++ ++ . = DEFINED(env_offset) ? env_offset : .; ++ common/environment.o (.text) ++ ++ *(.text) ++ ++ *(.fixup) ++ *(.got1) ++ . = ALIGN(16); ++ *(.rodata) ++ *(.rodata1) ++ *(.rodata.str1.4) ++ *(.eh_frame) ++ } ++ .fini : { *(.fini) } =0 ++ .ctors : { *(.ctors) } ++ .dtors : { *(.dtors) } ++ ++ /* Read-write section, merged into data segment: */ ++ . = (. + 0x0FFF) & 0xFFFFF000; ++ _erotext = .; ++ PROVIDE (erotext = .); ++ .reloc : ++ { ++ *(.got) ++ _GOT2_TABLE_ = .; ++ *(.got2) ++ _FIXUP_TABLE_ = .; ++ *(.fixup) ++ } ++ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; ++ __fixup_entries = (. - _FIXUP_TABLE_) >> 2; ++ ++ .data : ++ { ++ *(.data) ++ *(.data1) ++ *(.sdata) ++ *(.sdata2) ++ *(.dynamic) ++ CONSTRUCTORS ++ } ++ _edata = .; ++ PROVIDE (edata = .); ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ ++ . = .; ++ __start___ex_table = .; ++ __ex_table : { *(__ex_table) } ++ __stop___ex_table = .; ++ ++ . = ALIGN(4096); ++ __init_begin = .; ++ .text.init : { *(.text.init) } ++ .data.init : { *(.data.init) } ++ . = ALIGN(4096); ++ __init_end = .; ++ ++ __bss_start = .; ++ .bss : ++ { ++ *(.sbss) *(.scommon) ++ *(.dynbss) ++ *(.bss) ++ *(COMMON) ++ } ++ ++ _end = . ; ++ PROVIDE (end = .); ++} +diff -urN u-boot-86xx/common/cmd_bootm.c u-boot-86xx-kuro_clean/common/cmd_bootm.c +--- u-boot-86xx/common/cmd_bootm.c 2006-10-13 00:27:16.000000000 +0200 ++++ u-boot-86xx-kuro_clean/common/cmd_bootm.c 2006-11-06 22:05:38.000000000 +0100 +@@ -193,6 +193,12 @@ + verify = 0; + } else + #endif /* __I386__ */ ++#ifdef CONFIG_LINKSTATION ++ extern boot_os_Fcn do_boot_lskernel; ++ do_boot_lskernel(cmdtp, flag, argc, argv, ++ addr, NULL, verify); ++ return 1; /* Only returns on error */ ++#endif + { + puts ("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS (-1); +diff -urN u-boot-86xx/common/cmd_ext2.c u-boot-86xx-kuro_clean/common/cmd_ext2.c +--- u-boot-86xx/common/cmd_ext2.c 2006-10-13 00:27:16.000000000 +0200 ++++ u-boot-86xx-kuro_clean/common/cmd_ext2.c 2006-11-06 22:05:38.000000000 +0100 +@@ -283,7 +283,8 @@ + sprintf(buf, "%lX", filelen); + setenv("filesize", buf); + +- return(filelen); ++// return(filelen); ++ return(0); + } + + U_BOOT_CMD( +diff -urN u-boot-86xx/common/console.c u-boot-86xx-kuro_clean/common/console.c +--- u-boot-86xx/common/console.c 2006-10-13 00:27:16.000000000 +0200 ++++ u-boot-86xx-kuro_clean/common/console.c 2006-11-06 22:05:38.000000000 +0100 +@@ -48,7 +48,7 @@ + + #endif /* CFG_CONSOLE_IS_IN_ENV */ + +-static int console_setfile (int file, device_t * dev) ++int console_setfile (int file, device_t * dev) + { + int error = 0; + +@@ -444,22 +444,27 @@ + gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ + + #ifndef CFG_CONSOLE_INFO_QUIET ++ if (strcmp(stdio_devices[stdout]->name, "serial")) { ++ extern char version_string[]; ++ printf ("\n%s\n", version_string); ++ } ++ + /* Print information */ +- puts ("In: "); ++ puts ("stdin : "); + if (stdio_devices[stdin] == NULL) { + puts ("No input devices available!\n"); + } else { + printf ("%s\n", stdio_devices[stdin]->name); + } + +- puts ("Out: "); ++ puts ("stdout: "); + if (stdio_devices[stdout] == NULL) { + puts ("No output devices available!\n"); + } else { + printf ("%s\n", stdio_devices[stdout]->name); + } + +- puts ("Err: "); ++ puts ("stderr: "); + if (stdio_devices[stderr] == NULL) { + puts ("No error devices available!\n"); + } else { +diff -urN u-boot-86xx/common/main.c u-boot-86xx-kuro_clean/common/main.c +--- u-boot-86xx/common/main.c 2006-10-13 00:27:16.000000000 +0200 ++++ u-boot-86xx-kuro_clean/common/main.c 2006-11-06 22:05:38.000000000 +0100 +@@ -84,6 +84,11 @@ + extern void mdm_init(void); /* defined in board.c */ + #endif + ++#ifdef CONFIG_LINKSTATION ++extern int avr_input(void); ++extern void avr_StopBoot(void); ++#endif ++ + /*************************************************************************** + * Watch for 'delay' seconds for autoboot stop or autoboot delay string. + * returns: 0 - no key string, allow autoboot +@@ -162,7 +167,14 @@ + /* In order to keep up with incoming data, check timeout only + * when catch up. + */ ++ uint64_t onesec = endtick(1); ++ int bootremain = bootdelay; + while (!abort && get_ticks() <= etime) { ++ if (get_ticks() >= onesec) { ++ onesec = endtick(1); ++ putc('\r'); ++ printf (CONFIG_AUTOBOOT_PROMPT, --bootremain); ++ } + for (i = 0; i < sizeof(delaykey) / sizeof(delaykey[0]); i ++) { + if (delaykey[i].len > 0 && + presskey_len >= delaykey[i].len && +@@ -183,6 +195,20 @@ + } + } + ++#ifdef CONFIG_LINKSTATION ++ int avr_action = avr_input(); ++ if (avr_action == -3) ++ /* Abort boot */ ++ abort = 1; ++ else if (avr_action == -2) { ++ /* Restart boot */ ++ putc('\r'); ++ printf (CONFIG_AUTOBOOT_PROMPT, bootdelay); ++ etime = endtick(bootdelay); ++ onesec = endtick(1); ++ bootremain = bootdelay; ++ } ++#endif + if (tstc()) { + if (presskey_len < presskey_max) { + presskey [presskey_len ++] = getc(); +@@ -195,6 +221,7 @@ + } + } + } ++ putc('\n'); + # if DEBUG_BOOTKEYS + if (!abort) + puts ("key timeout\n"); +@@ -411,6 +438,10 @@ + int prev = disable_ctrlc(1); /* disable Control C checking */ + # endif + ++#ifdef CONFIG_LINKSTATION ++ s = getenv("bootcmd"); /* bootcmd can change (see avr.c) */ ++#endif ++ + # ifndef CFG_HUSH_PARSER + run_command (s, 0); + # else +@@ -445,6 +476,10 @@ + } + #endif + ++#ifdef CONFIG_LINKSTATION ++ avr_StopBoot(); ++#endif ++ + /* + * Main Loop for Monitor Command Processing + */ +@@ -469,6 +504,10 @@ + strcpy (lastcommand, console_buffer); + else if (len == 0) + flag |= CMD_FLAG_REPEAT; ++#ifdef CONFIG_LINKSTATION ++ else if (len == -2) ++ return; ++#endif + #ifdef CONFIG_BOOT_RETRY_TIME + else if (len == -2) { + /* -2 means timed out, retry autoboot +@@ -978,6 +1017,15 @@ + show_activity(0); + } + #endif ++#ifdef CONFIG_LINKSTATION ++ while (!tstc()) { ++ int avr_ret = avr_input(); ++ if (avr_ret == -2) ++ return (-2); ++ else if (avr_ret > 0) ++ return avr_ret; ++ } ++#endif + c = getc(); + + /* +diff -urN u-boot-86xx/cpu/mpc824x/cpu.c u-boot-86xx-kuro_clean/cpu/mpc824x/cpu.c +--- u-boot-86xx/cpu/mpc824x/cpu.c 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/cpu/mpc824x/cpu.c 2006-11-06 22:05:38.000000000 +0100 +@@ -92,6 +92,7 @@ + + /*------------------------------------------------------------------- */ + ++#ifndef CONFIG_LINKSTATION + int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) + { + ulong msr, addr; +@@ -125,6 +126,7 @@ + return 1; + + } ++#endif + + /* ------------------------------------------------------------------------- */ + +diff -urN u-boot-86xx/cpu/mpc824x/start.S u-boot-86xx-kuro_clean/cpu/mpc824x/start.S +--- u-boot-86xx/cpu/mpc824x/start.S 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/cpu/mpc824x/start.S 2006-11-06 22:05:38.000000000 +0100 +@@ -130,7 +130,7 @@ + + + in_flash: +-#if defined(CONFIG_BMW) ++#if defined(CONFIG_BMW) || defined(CONFIG_LINKSTATION) + bl early_init_f /* Must be ASM: no stack yet! */ + #endif + /* +@@ -155,6 +155,7 @@ + mtspr HID0, r2 + sync + ++#if !defined(CONFIG_LINKSTATION) + /* Allocate Initial RAM in data cache. + */ + lis r3, CFG_INIT_RAM_ADDR@h +@@ -175,6 +176,7 @@ + ori r3, r3, 0x0080 + sync + mtspr 1011, r3 ++#endif /* !CONFIG_LINKSTATION */ + #endif /* !CONFIG_BMW */ + /* + * Thisk the stack pointer *somewhere* sensible. Doesnt +@@ -195,7 +197,9 @@ + GET_GOT /* initialize GOT access */ + + /* r3: IMMR */ ++#if !defined(CONFIG_LINKSTATION) + bl cpu_init_f /* run low-level CPU init code (from Flash) */ ++#endif + + mr r3, r21 + /* r3: BOOTFLAG */ +@@ -475,7 +479,7 @@ + mr r10, r5 /* Save copy of Destination Address */ + + mr r3, r5 /* Destination Address */ +-#ifdef CFG_RAMBOOT ++#if defined(CFG_RAMBOOT) && !defined(CONFIG_LINKSTATION) + lis r4, CFG_SDRAM_BASE@h /* Source Address */ + ori r4, r4, CFG_SDRAM_BASE@l + #else +@@ -689,6 +693,14 @@ + cmplw 0, r7, r8 + blt 4b + ++ mfmsr r7 /* Exception prefix 0x000 */ ++ li r8,0 ++ ori r8,r8,MSR_IP ++ andc r7,r7,r8 ++ SYNC ++ mtmsr r7 ++ SYNC ++ + mtlr r4 /* restore link register */ + blr + +diff -urN u-boot-86xx/drivers/dc2114x.c u-boot-86xx-kuro_clean/drivers/dc2114x.c +--- u-boot-86xx/drivers/dc2114x.c 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/drivers/dc2114x.c 2006-11-06 22:05:38.000000000 +0100 +@@ -27,14 +27,20 @@ + #include <net.h> + #include <pci.h> + ++#if 0 ++#define DEBUG_TRACE ++#define DEBUG_TULIP ++#endif ++ + #undef DEBUG_SROM + #undef DEBUG_SROM2 + + #undef UPDATE_SROM + +-/* PCI Registers. ++/* ++ * PCI Registers. + */ +-#define PCI_CFDA_PSM 0x43 ++#define PCI_CFDA_PSM 0x43 + + #define CFRV_RN 0x000000f0 /* Revision Number */ + +@@ -43,10 +49,12 @@ + + #define DC2114x_BRK 0x0020 /* CFRV break between DC21142 & DC21143 */ + +-/* Ethernet chip registers. ++/* ++ * Ethernet chip registers. + */ + #define DE4X5_BMR 0x000 /* Bus Mode Register */ + #define DE4X5_TPD 0x008 /* Transmit Poll Demand Reg */ ++#define DE4X5_RPD 0x010 /* Receive Poll Demand Reg */ + #define DE4X5_RRBA 0x018 /* RX Ring Base Address Reg */ + #define DE4X5_TRBA 0x020 /* TX Ring Base Address Reg */ + #define DE4X5_STS 0x028 /* Status Register */ +@@ -54,7 +62,8 @@ + #define DE4X5_SICR 0x068 /* SIA Connectivity Register */ + #define DE4X5_APROM 0x048 /* Ethernet Address PROM */ + +-/* Register bits. ++/* ++ * Register bits. + */ + #define BMR_SWR 0x00000001 /* Software Reset */ + #define STS_TS 0x00700000 /* Transmit Process State */ +@@ -64,8 +73,10 @@ + #define OMR_PS 0x00040000 /* Port Select */ + #define OMR_SDP 0x02000000 /* SD Polarity - MUST BE ASSERTED */ + #define OMR_PM 0x00000080 /* Pass All Multicast */ ++#define OMR_PMS 0x00000040 /* Promiscuous */ + +-/* Descriptor bits. ++/* ++ * Descriptor bits. + */ + #define R_OWN 0x80000000 /* Own Bit */ + #define RD_RER 0x02000000 /* Receive End Of Ring */ +@@ -85,10 +96,10 @@ + + #define SROM_HWADD 0x0014 /* Hardware Address offset in SROM */ + #define SROM_RD 0x00004000 /* Read from Boot ROM */ +-#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ ++#define EE_DATA_WRITE 0x04 /* EEPROM chip data in. */ + #define EE_WRITE_0 0x4801 + #define EE_WRITE_1 0x4805 +-#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ ++#define EE_DATA_READ 0x08 /* EEPROM chip data out. */ + #define SROM_SR 0x00000800 /* Select Serial ROM when set */ + + #define DT_IN 0x00000004 /* Serial Data In */ +@@ -97,6 +108,36 @@ + + #define POLL_DEMAND 1 + ++#ifndef PCI_VENDOR_ID_ADMTEK ++# define PCI_VENDOR_ID_ADMTEK 0x1317 ++#endif ++#ifndef PCI_DEVICE_ID_ADMTEK_AN983B ++# define PCI_DEVICE_ID_ADMTEK_AN983B 0x985 ++#endif ++ ++/* The chip types have been taken from linux-2.4.31 ++ * drivers/net/tulip/tulip.h ++ * Only COMET is used for now ++ */ ++enum chips { ++ DC21040 = 0, ++ DC21041 = 1, ++ DC21140 = 2, ++ DC21142 = 3, DC21143 = 3, ++ LC82C168, ++ MX98713, ++ MX98715, ++ MX98725, ++ AX88140, ++ PNIC2, ++ COMET, ++ COMPEX9881, ++ I21145, ++ DM910X, ++ CONEXANT, ++}; ++static int chip_idx = DC21143; ++ + #ifdef CONFIG_TULIP_FIX_DAVICOM + #define RESET_DM9102(dev) {\ + unsigned long i;\ +@@ -108,58 +149,63 @@ + #else + #define RESET_DE4X5(dev) {\ + int i;\ +- i=INL(dev, DE4X5_BMR);\ +- udelay(1000);\ ++ i=0x01A04000;\ + OUTL(dev, i | BMR_SWR, DE4X5_BMR);\ + udelay(1000);\ + OUTL(dev, i, DE4X5_BMR);\ + udelay(1000);\ +- for (i=0;i<5;i++) {INL(dev, DE4X5_BMR); udelay(10000);}\ +- udelay(1000);\ + } + #endif + + #define START_DE4X5(dev) {\ +- s32 omr; \ ++ u32 omr; \ + omr = INL(dev, DE4X5_OMR);\ + omr |= OMR_ST | OMR_SR;\ + OUTL(dev, omr, DE4X5_OMR); /* Enable the TX and/or RX */\ + } + + #define STOP_DE4X5(dev) {\ +- s32 omr; \ ++ u32 omr; \ + omr = INL(dev, DE4X5_OMR);\ + omr &= ~(OMR_ST|OMR_SR);\ + OUTL(dev, omr, DE4X5_OMR); /* Disable the TX and/or RX */ \ + } + +-#define NUM_RX_DESC PKTBUFSRX ++#define NUM_RX_DESC 4 + #ifndef CONFIG_TULIP_FIX_DAVICOM +- #define NUM_TX_DESC 1 /* Number of TX descriptors */ ++ #define NUM_TX_DESC 2 /* Number of TX descriptors */ + #else + #define NUM_TX_DESC 4 + #endif +-#define RX_BUFF_SZ PKTSIZE_ALIGN ++#define BUFLEN 1536 + + #define TOUT_LOOP 1000000 + + #define SETUP_FRAME_LEN 192 + #define ETH_ALEN 6 ++#define ETH_ZLEN 60 + + struct de4x5_desc { +- volatile s32 status; ++ volatile u32 status; + u32 des1; + u32 buf; + u32 next; + }; + +-static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(32))); /* RX descriptor ring */ +-static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(32))); /* TX descriptor ring */ +-static int rx_new; /* RX descriptor ring pointer */ +-static int tx_new; /* TX descriptor ring pointer */ ++/* Note: transmit and receive buffers must be longword aligned and ++ longword divisable */ + +-static char rxRingSize; +-static char txRingSize; ++/* TX descriptor ring */ ++static struct de4x5_desc tx_ring[NUM_TX_DESC] __attribute__ ((aligned(4))); ++/* TX buffer */ ++static unsigned char txb[BUFLEN] __attribute__ ((aligned(32))); ++ ++/* RX descriptor ring */ ++static struct de4x5_desc rx_ring[NUM_RX_DESC] __attribute__ ((aligned(4))); ++/* RX buffers */ ++static unsigned char rxb[NUM_RX_DESC * BUFLEN] __attribute__ ((aligned(32))); ++ ++static int rx_new; /* RX descriptor ring pointer */ + + #if defined(UPDATE_SROM) || !defined(CONFIG_TULIP_FIX_DAVICOM) + static void sendto_srom(struct eth_device* dev, u_int command, u_long addr); +@@ -204,6 +250,7 @@ + static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142 }, ++ { PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_AN983B }, + #ifdef CONFIG_TULIP_FIX_DAVICOM + { PCI_VENDOR_ID_DAVICOM, PCI_DEVICE_ID_DAVICOM_DM9102A }, + #endif +@@ -214,29 +261,44 @@ + { + int idx=0; + int card_number = 0; +- unsigned int cfrv; ++ unsigned int cfrv; + unsigned char timer; +- pci_dev_t devbusfn; ++ pci_dev_t devbusfn; + unsigned int iobase; + unsigned short status; + struct eth_device* dev; ++ u16 vendor; ++ u16 device; + ++#ifdef DEBUG_TULIP ++ printf("%s\n", __FUNCTION__); ++#endif + while(1) { + devbusfn = pci_find_devices(supported, idx++); + if (devbusfn == -1) { + break; + } ++ pci_read_config_word(devbusfn, PCI_VENDOR_ID, &vendor); ++ pci_read_config_word(devbusfn, PCI_DEVICE_ID, &device); + +- /* Get the chip configuration revision register. */ +- pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv); ++ debug("dc21x4x: devbusfn: %08lX, VID: %08lX, DID: %08lX\n", ++ devbusfn, vendor, device); ++ ++ if (vendor == PCI_VENDOR_ID_ADMTEK && \ ++ device == PCI_DEVICE_ID_ADMTEK_AN983B) { ++ chip_idx = COMET; ++ } else { ++ /* Get the chip configuration revision register. */ ++ pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv); + + #ifndef CONFIG_TULIP_FIX_DAVICOM +- if ((cfrv & CFRV_RN) < DC2114x_BRK ) { +- printf("Error: The chip is not DC21143.\n"); +- continue; +- } ++ if ((cfrv & CFRV_RN) < DC2114x_BRK ) { ++ printf("Error: The chip is not DC21143.\n"); ++ idx++; ++ continue; ++ } + #endif +- ++ } + pci_read_config_word(devbusfn, PCI_COMMAND, &status); + status |= + #ifdef CONFIG_TULIP_USE_IO +@@ -286,7 +348,10 @@ + #ifdef CONFIG_TULIP_FIX_DAVICOM + sprintf(dev->name, "Davicom#%d", card_number); + #else +- sprintf(dev->name, "dc21x4x#%d", card_number); ++ if (chip_idx == COMET) ++ sprintf(dev->name, "COMET#%d", card_number); ++ else ++ sprintf(dev->name, "dc21x4x#%d", card_number); + #endif + + #ifdef CONFIG_TULIP_USE_IO +@@ -303,8 +368,6 @@ + /* Ensure we're not sleeping. */ + pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); + +- udelay(10 * 1000); +- + #ifndef CONFIG_TULIP_FIX_DAVICOM + read_hw_addr(dev, bis); + #endif +@@ -321,8 +384,9 @@ + int i; + int devbusfn = (int) dev->priv; + +- /* Ensure we're not sleeping. */ +- pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); ++#if defined(DEBUG_TULIP) || defined(DEBUG_TRACE) ++ serial_printf("%0lu %s\n", get_timer(0), __FUNCTION__); ++#endif + + #ifdef CONFIG_TULIP_FIX_DAVICOM + RESET_DM9102(dev); +@@ -330,57 +394,71 @@ + RESET_DE4X5(dev); + #endif + +- if ((INL(dev, DE4X5_STS) & (STS_TS | STS_RS)) != 0) { +- printf("Error: Cannot reset ethernet controller.\n"); +- return 0; +- } +- + #ifdef CONFIG_TULIP_SELECT_MEDIA + dc21x4x_select_media(dev); + #else +- OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); ++ if (chip_idx == COMET) { ++ /* No multicast */ ++ OUTL(dev, 0, 0xAC); ++ OUTL(dev, 0, 0xB0); ++ } else { ++ OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); ++ } + #endif + + for (i = 0; i < NUM_RX_DESC; i++) { + rx_ring[i].status = cpu_to_le32(R_OWN); +- rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); +- rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32) NetRxPackets[i])); +-#ifdef CONFIG_TULIP_FIX_DAVICOM +- rx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &rx_ring[(i+1) % NUM_RX_DESC])); +-#else +- rx_ring[i].next = 0; +-#endif ++ rx_ring[i].des1 = cpu_to_le32(BUFLEN); ++ rx_ring[i].buf = cpu_to_le32(phys_to_bus((u32)&rxb[i * BUFLEN])); ++ rx_ring[i].next = cpu_to_le32(phys_to_bus((u32)&rx_ring[i+1])); + } ++ /* Write the end of list marker to the descriptor lists. */ ++ rx_ring[NUM_RX_DESC - 1].des1 |= cpu_to_le32(RD_RER); ++ rx_ring[NUM_RX_DESC - 1].next = cpu_to_le32(phys_to_bus((u32)&rx_ring[0])); + +- for (i=0; i < NUM_TX_DESC; i++) { +- tx_ring[i].status = 0; +- tx_ring[i].des1 = 0; +- tx_ring[i].buf = 0; ++ /* Point to the first descriptor */ ++ rx_new = 0; + +-#ifdef CONFIG_TULIP_FIX_DAVICOM +- tx_ring[i].next = cpu_to_le32(phys_to_bus((u32) &tx_ring[(i+1) % NUM_TX_DESC])); +-#else +- tx_ring[i].next = 0; +-#endif +- } ++ /* We only use 1 transmit buffer, but we use 2 descriptors so ++ transmit engines have somewhere to point to if they feel the need */ + +- rxRingSize = NUM_RX_DESC; +- txRingSize = NUM_TX_DESC; ++ tx_ring[0].status = 0; ++ tx_ring[0].des1 = 0; ++ tx_ring[0].buf = cpu_to_le32(phys_to_bus((u32)&txb[0])); ++ tx_ring[0].next = cpu_to_le32(phys_to_bus((u32)&tx_ring[1])); ++ ++ /* this descriptor should never get used, since it will never be owned ++ by the machine (status will always == 0) */ ++ ++ tx_ring[1].status = 0; ++ tx_ring[1].des1 = 0; ++ tx_ring[1].buf = cpu_to_le32(phys_to_bus((u32)&txb[0])); ++ tx_ring[1].next = cpu_to_le32(phys_to_bus((u32)&tx_ring[0])); + + /* Write the end of list marker to the descriptor lists. */ +- rx_ring[rxRingSize - 1].des1 |= cpu_to_le32(RD_RER); +- tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER); ++ tx_ring[1].des1 |= cpu_to_le32(TD_TER); + + /* Tell the adapter where the TX/RX rings are located. */ +- OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA); +- OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA); ++ OUTL(dev, phys_to_bus((u32) &rx_ring[0]), DE4X5_RRBA); ++ OUTL(dev, phys_to_bus((u32) &tx_ring[0]), DE4X5_TRBA); ++ ++ if (chip_idx == COMET) { ++ /* Bit 18 (0x00040000) is reserved in the AN983B */ ++ /* datasheet, but it is used by the tulip driver */ ++ OUTL(dev, (INL(dev, (DE4X5_OMR)) & ~(OMR_PMS | OMR_PM)) | OMR_PS, DE4X5_OMR); ++ /* Enable automatic Tx underrun recovery */ ++ OUTL(dev, INL(dev, 0x88) | 1, 0x88); ++// OUTL(dev, INL(dev, 0x88) | 0x19, 0x88); ++ } + + START_DE4X5(dev); + +- tx_new = 0; +- rx_new = 0; ++ /* Start receiving */ ++ OUTL(dev, POLL_DEMAND, DE4X5_RPD); + +- send_setup_frame(dev, bis); ++ if (chip_idx != COMET) { /* No setup frame needed by COMET */ ++ send_setup_frame(dev, bis); ++ } + + return 1; + } +@@ -389,90 +467,117 @@ + { + int status = -1; + int i; ++ u32 len = length; + + if (length <= 0) { + printf("%s: bad packet size: %d\n", dev->name, length); + goto Done; + } + +- for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { ++ for(i = 0; tx_ring[0].status & cpu_to_le32(T_OWN); i++) { + if (i >= TOUT_LOOP) { +- printf("%s: tx error buffer not ready\n", dev->name); ++ printf(".%s: Tx not ready\n", dev->name); + goto Done; + } + } + +- tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) packet)); +- tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_LS | TD_FS | length); +- tx_ring[tx_new].status = cpu_to_le32(T_OWN); ++ /* Disable the TX */ ++ OUTL(dev, INL(dev, DE4X5_OMR) & ~OMR_ST, DE4X5_OMR); ++ ++ memcpy(txb, (char*)packet, length); ++ ++ /* setup the transmit descriptor */ ++ tx_ring[0].des1 = cpu_to_le32(TD_LS | TD_FS | length); ++ tx_ring[0].status = cpu_to_le32(T_OWN); + ++ /* Point to transmit descriptor */ ++ OUTL(dev, phys_to_bus((u32) &tx_ring[0]), DE4X5_TRBA); ++ ++ /* Enable the TX */ ++ OUTL(dev, INL(dev, DE4X5_OMR) | OMR_ST, DE4X5_OMR); ++ ++ /* Immediate transmit demand */ + OUTL(dev, POLL_DEMAND, DE4X5_TPD); + +- for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { ++ for(i = 0; tx_ring[0].status & cpu_to_le32(T_OWN); i++) { + if (i >= TOUT_LOOP) { +- printf(".%s: tx buffer not ready\n", dev->name); ++ printf(".%s: Tx Timeout\n", dev->name); + goto Done; + } + } + +- if (le32_to_cpu(tx_ring[tx_new].status) & TD_ES) { +-#if 0 /* test-only */ ++#ifdef DEBUG_TRACE ++ serial_printf("%0lu Tx L2: %d P: %04X IP: %08X\n", ++ get_timer(0), i, *((u16 *)(packet+0xC)), ++ *((u32 *)(packet+0x1E))); ++#endif ++ ++ if (le32_to_cpu(tx_ring[0].status) & TD_ES) { ++#if 1 /* test-only */ + printf("TX error status = 0x%08X\n", +- le32_to_cpu(tx_ring[tx_new].status)); ++ le32_to_cpu(tx_ring[0].status)); + #endif +- tx_ring[tx_new].status = 0x0; ++ tx_ring[0].status = 0x0; + goto Done; + } + + status = length; + + Done: +- tx_new = (tx_new+1) % NUM_TX_DESC; + return status; + } + + static int dc21x4x_recv(struct eth_device* dev) + { +- s32 status; ++ u32 status; ++ int rx_prv; + int length = 0; + +- for ( ; ; ) { +- status = (s32)le32_to_cpu(rx_ring[rx_new].status); ++#ifdef DEBUG_TULIP ++ u32 csr5 = INL(dev, DE4X5_STS); ++ if ((csr5 & STS_RS) != 0x00060000) { ++ OUTL(dev, 0x0001ffff, DE4X5_STS); ++ printf("Receive status: 0x%08X\n", csr5); ++ } ++#endif + +- if (status & R_OWN) { +- break; +- } ++ status = (u32)le32_to_cpu(rx_ring[rx_new].status); ++ if (status & R_OWN) ++ return 0; + +- if (status & RD_LS) { +- /* Valid frame status. +- */ +- if (status & RD_ES) { +- +- /* There was an error. +- */ +- printf("RX error status = 0x%08X\n", status); +- } else { +- /* A valid frame received. +- */ +- length = (le32_to_cpu(rx_ring[rx_new].status) >> 16); +- +- /* Pass the packet up to the protocol +- * layers. +- */ +- NetReceive(NetRxPackets[rx_new], length - 4); +- } ++#ifdef DEBUG_TULIP ++ printf("recv status: 0x%08X\n", status); ++#endif + +- /* Change buffer ownership for this frame, back +- * to the adapter. +- */ ++ if (status & RD_LS) { ++#ifdef DEBUG_TRACE ++ serial_printf("rx: %d status: %08X\n", rx_new, status); ++#endif ++ /* Valid frame status */ ++ if (status & RD_ES) { ++ /* There was an error */ ++ printf("RX error status = 0x%08X\n", status); + rx_ring[rx_new].status = cpu_to_le32(R_OWN); +- } ++ } else { ++ /* Received valid frame */ ++ length = (int)(le32_to_cpu(rx_ring[rx_new].status) >> 16); ++ ++ /* Pass the packet up to the protocol layers. */ ++ unsigned char rxdata[BUFLEN]; ++ memcpy(rxdata, rxb + rx_new * BUFLEN, length - 4); + +- /* Update entry information. +- */ +- rx_new = (rx_new + 1) % rxRingSize; ++ /* Give buffer ownership for this ++ * frame back to the adapter */ ++ rx_ring[rx_new].status = cpu_to_le32(R_OWN); ++ ++ /* Pass the received packet to the upper layer */ ++ NetReceive(rxdata, length - 4); ++ } + } + ++ /* Update current descriptor index */ ++ rx_new = (rx_new + 1) % NUM_RX_DESC; ++ + return length; + } + +@@ -480,10 +585,12 @@ + { + int devbusfn = (int) dev->priv; + ++#ifdef DEBUG_TULIP ++ printf("%s\n", __FUNCTION__); ++#endif + STOP_DE4X5(dev); + OUTL(dev, 0, DE4X5_SICR); + +- pci_write_config_byte(devbusfn, PCI_CFDA_PSM, SLEEP); + } + + static void send_setup_frame(struct eth_device* dev, bd_t *bis) +@@ -501,30 +608,29 @@ + } + } + +- for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { ++ for(i = 0; tx_ring[0].status & cpu_to_le32(T_OWN); i++) { + if (i >= TOUT_LOOP) { + printf("%s: tx error buffer not ready\n", dev->name); + goto Done; + } + } + +- tx_ring[tx_new].buf = cpu_to_le32(phys_to_bus((u32) &setup_frame[0])); +- tx_ring[tx_new].des1 = cpu_to_le32(TD_TER | TD_SET| SETUP_FRAME_LEN); +- tx_ring[tx_new].status = cpu_to_le32(T_OWN); ++ tx_ring[0].buf = cpu_to_le32(phys_to_bus((u32) &setup_frame[0])); ++ tx_ring[0].des1 = cpu_to_le32(TD_TER | TD_SET| SETUP_FRAME_LEN); ++ tx_ring[0].status = cpu_to_le32(T_OWN); + + OUTL(dev, POLL_DEMAND, DE4X5_TPD); + +- for(i = 0; tx_ring[tx_new].status & cpu_to_le32(T_OWN); i++) { ++ for(i = 0; tx_ring[0].status & cpu_to_le32(T_OWN); i++) { + if (i >= TOUT_LOOP) { + printf("%s: tx buffer not ready\n", dev->name); + goto Done; + } + } + +- if (le32_to_cpu(tx_ring[tx_new].status) != 0x7FFFFFFF) { +- printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[tx_new].status)); ++ if (le32_to_cpu(tx_ring[0].status) != 0x7FFFFFFF) { ++ printf("TX error status2 = 0x%08X\n", le32_to_cpu(tx_ring[0].status)); + } +- tx_new = (tx_new+1) % NUM_TX_DESC; + + Done: + return; +@@ -543,7 +649,7 @@ + static int + getfrom_srom(struct eth_device* dev, u_long addr) + { +- s32 tmp; ++ u32 tmp; + + tmp = INL(dev, addr); + udelay(1); +@@ -708,19 +814,27 @@ + #ifndef CONFIG_TULIP_FIX_DAVICOM + static void read_hw_addr(struct eth_device *dev, bd_t *bis) + { +- u_short tmp, *p = (u_short *)(&dev->enetaddr[0]); +- int i, j = 0; +- +- for (i = 0; i < (ETH_ALEN >> 1); i++) { +- tmp = read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1) + i)); +- *p = le16_to_cpu(tmp); +- j += *p++; +- } +- +- if ((j == 0) || (j == 0x2fffd)) { +- memset (dev->enetaddr, 0, ETH_ALEN); +- debug ("Warning: can't read HW address from SROM.\n"); +- goto Done; ++ if (chip_idx == COMET) { ++ /* COMET reads the ehernet address directly from the EEPROM */ ++ *(u32 *)dev->enetaddr = cpu_to_le32(INL(dev, 0xA4)); ++ *(u16 *)(dev->enetaddr+4) = cpu_to_le16(INL(dev, 0xA8)); ++ *(u32 *)bis->bi_enetaddr = *(u32 *)dev->enetaddr; ++ *(u16 *)(bis->bi_enetaddr+4) = *(u16 *)(dev->enetaddr+4); ++ } else { ++ u_short tmp, *p = (u_short *)(&dev->enetaddr[0]); ++ int i, j = 0; ++ ++ for (i = 0; i < (ETH_ALEN >> 1); i++) { ++ tmp=read_srom(dev, DE4X5_APROM, ((SROM_HWADD >> 1)+i)); ++ *p = le16_to_cpu(tmp); ++ j += *p++; ++ } ++ ++ if ((j == 0) || (j == 0x2fffd)) { ++ memset (dev->enetaddr, 0, ETH_ALEN); ++ debug ("Warning: can't read HW address from SROM.\n"); ++ goto Done; ++ } + } + + return; +@@ -769,3 +883,5 @@ + #endif /* UPDATE_SROM */ + + #endif /* CFG_CMD_NET && CONFIG_NET_MULTI && CONFIG_TULIP */ ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/drivers/netconsole.c u-boot-86xx-kuro_clean/drivers/netconsole.c +--- u-boot-86xx/drivers/netconsole.c 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/drivers/netconsole.c 2006-11-06 22:05:38.000000000 +0100 +@@ -27,6 +27,7 @@ + + #include <command.h> + #include <devices.h> ++#include <console.h> + #include <net.h> + + DECLARE_GLOBAL_DATA_PTR; +@@ -124,6 +125,26 @@ + output_packet_len = len; + NetLoop (NETCONS); /* wait for arp reply and send packet */ + output_packet_len = 0; ++#if defined(CFG_CONSOLE_IS_IN_ENV) || defined(CONFIG_SILENT_CONSOLE) ++ if (NetState == NETLOOP_FAIL) { ++ /* ARP failed, fail back to serial console */ ++ device_t *idev; ++ device_t *odev; ++ ++ idev = search_device(DEV_FLAGS_INPUT, "serial"); ++ odev = search_device(DEV_FLAGS_OUTPUT, "serial"); ++ ++ console_setfile (stdin, idev); ++ console_setfile (stdout, odev); ++ console_setfile (stderr, odev); ++ ++#if defined(CONFIG_LINKSTATION) ++ void next_cons_choice(int console); ++ /* Console 0 is the serial console */ ++ next_cons_choice(0); ++#endif ++ } ++#endif + return; + } + +@@ -236,7 +257,8 @@ + + input_recursion = 1; + +- net_timeout = 1; ++// net_timeout = 1; ++ net_timeout = 50; + NetLoop (NETCONS); /* kind of poll */ + + input_recursion = 0; +diff -urN u-boot-86xx/drivers/rtl8169.c u-boot-86xx-kuro_clean/drivers/rtl8169.c +--- u-boot-86xx/drivers/rtl8169.c 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/drivers/rtl8169.c 2006-11-06 22:05:38.000000000 +0100 +@@ -48,7 +48,10 @@ + * + * Indent Options: indent -kr -i8 + ***************************************************************************/ +- ++/* ++ * 26 August 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> ++ * Modified to use le32_to_cpu and cpu_to_le32 properly ++ */ + #include <common.h> + #include <malloc.h> + #include <net.h> +@@ -68,6 +71,7 @@ + static u32 ioaddr; + + /* Condensed operations for readability. */ ++#define virt_to_bus(addr) cpu_to_le32(addr) + #define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr)) + #define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr)) + +@@ -413,23 +417,23 @@ + ioaddr = dev->iobase; + + cur_rx = tpc->cur_rx; +- if ((tpc->RxDescArray[cur_rx].status & OWNbit) == 0) { +- if (!(tpc->RxDescArray[cur_rx].status & RxRES)) { ++ if ((le32_to_cpu(tpc->RxDescArray[cur_rx].status) & OWNbit) == 0) { ++ if (!(le32_to_cpu(tpc->RxDescArray[cur_rx].status) & RxRES)) { + unsigned char rxdata[RX_BUF_LEN]; +- length = (int) (tpc->RxDescArray[cur_rx]. +- status & 0x00001FFF) - 4; ++ length = (int) (le32_to_cpu(tpc->RxDescArray[cur_rx]. ++ status) & 0x00001FFF) - 4; + + memcpy(rxdata, tpc->RxBufferRing[cur_rx], length); + NetReceive(rxdata, length); + + if (cur_rx == NUM_RX_DESC - 1) + tpc->RxDescArray[cur_rx].status = +- (OWNbit | EORbit) + RX_BUF_SIZE; ++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); + else + tpc->RxDescArray[cur_rx].status = +- OWNbit + RX_BUF_SIZE; ++ cpu_to_le32(OWNbit + RX_BUF_SIZE); + tpc->RxDescArray[cur_rx].buf_addr = +- virt_to_bus(tpc->RxBufferRing[cur_rx]); ++ cpu_to_le32(tpc->RxBufferRing[cur_rx]); + } else { + puts("Error Rx"); + } +@@ -454,6 +458,7 @@ + u8 *ptxb; + int entry = tpc->cur_tx % NUM_TX_DESC; + u32 len = length; ++ int ret; + + #ifdef DEBUG_RTL8169_TX + int stime = currticks(); +@@ -465,39 +470,46 @@ + + /* point to the current txb incase multiple tx_rings are used */ + ptxb = tpc->Tx_skbuff[entry * MAX_ETH_FRAME_SIZE]; ++#ifdef DEBUG_RTL8169_TX ++ printf("ptxb: %08X, length: %d\n", ptxb, (int)length); ++#endif + memcpy(ptxb, (char *)packet, (int)length); + + while (len < ETH_ZLEN) + ptxb[len++] = '\0'; + +- tpc->TxDescArray[entry].buf_addr = virt_to_bus(ptxb); ++ tpc->TxDescArray[entry].buf_addr = cpu_to_le32(ptxb); + if (entry != (NUM_TX_DESC - 1)) { + tpc->TxDescArray[entry].status = +- (OWNbit | FSbit | LSbit) | ((len > ETH_ZLEN) ? +- len : ETH_ZLEN); ++ cpu_to_le32((OWNbit | FSbit | LSbit) | ++ ((len > ETH_ZLEN) ? len : ETH_ZLEN)); + } else { + tpc->TxDescArray[entry].status = +- (OWNbit | EORbit | FSbit | LSbit) | +- ((len > ETH_ZLEN) ? length : ETH_ZLEN); ++ cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | ++ ((len > ETH_ZLEN) ? len : ETH_ZLEN)); + } + RTL_W8(TxPoll, 0x40); /* set polling bit */ + + tpc->cur_tx++; + to = currticks() + TX_TIMEOUT; +- while ((tpc->TxDescArray[entry].status & OWNbit) && (currticks() < to)); /* wait */ ++ while ((le32_to_cpu(tpc->TxDescArray[entry].status) & OWNbit) ++ && (currticks() < to)); /* wait */ + + if (currticks() >= to) { + #ifdef DEBUG_RTL8169_TX + puts ("tx timeout/error\n"); + printf ("%s elapsed time : %d\n", __FUNCTION__, currticks()-stime); + #endif +- return 0; ++ ret = 0; + } else { + #ifdef DEBUG_RTL8169_TX + puts("tx done\n"); + #endif +- return length; ++ ret = length; + } ++ /* Delay to make net console (nc) work properly */ ++ udelay(20); ++ return ret; + } + + static void rtl8169_set_rx_mode(struct eth_device *dev) +@@ -603,13 +615,14 @@ + for (i = 0; i < NUM_RX_DESC; i++) { + if (i == (NUM_RX_DESC - 1)) + tpc->RxDescArray[i].status = +- (OWNbit | EORbit) + RX_BUF_SIZE; ++ cpu_to_le32((OWNbit | EORbit) + RX_BUF_SIZE); + else +- tpc->RxDescArray[i].status = OWNbit + RX_BUF_SIZE; ++ tpc->RxDescArray[i].status = ++ cpu_to_le32(OWNbit + RX_BUF_SIZE); + + tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE]; + tpc->RxDescArray[i].buf_addr = +- virt_to_bus(tpc->RxBufferRing[i]); ++ cpu_to_le32(tpc->RxBufferRing[i]); + } + + #ifdef DEBUG_RTL8169 +@@ -635,17 +648,23 @@ + if (tpc->TxDescArrays == 0) + puts("Allot Error"); + /* Tx Desscriptor needs 256 bytes alignment; */ +- TxPhyAddr = virt_to_bus(tpc->TxDescArrays); ++ TxPhyAddr = tpc->TxDescArrays; + diff = 256 - (TxPhyAddr - ((TxPhyAddr >> 8) << 8)); + TxPhyAddr += diff; + tpc->TxDescArray = (struct TxDesc *) (tpc->TxDescArrays + diff); ++#ifdef DEBUG_RTL8169 ++ printf("tpc->TxDescArray: %08X\n", tpc->TxDescArray); ++#endif + + tpc->RxDescArrays = rx_ring; + /* Rx Desscriptor needs 256 bytes alignment; */ +- RxPhyAddr = virt_to_bus(tpc->RxDescArrays); ++ RxPhyAddr = tpc->RxDescArrays; + diff = 256 - (RxPhyAddr - ((RxPhyAddr >> 8) << 8)); + RxPhyAddr += diff; + tpc->RxDescArray = (struct RxDesc *) (tpc->RxDescArrays + diff); ++#ifdef DEBUG_RTL8169 ++ printf("tpc->RxDescArray: %08X\n", tpc->RxDescArray); ++#endif + + if (tpc->TxDescArrays == NULL || tpc->RxDescArrays == NULL) { + puts("Allocate RxDescArray or TxDescArray failed\n"); +@@ -733,7 +752,7 @@ + + /* Get MAC address. FIXME: read EEPROM */ + for (i = 0; i < MAC_ADDR_LEN; i++) +- dev->enetaddr[i] = RTL_R8(MAC0 + i); ++ bis->bi_enetaddr[i] = dev->enetaddr[i] = RTL_R8(MAC0 + i); + + #ifdef DEBUG_RTL8169 + printf("MAC Address"); +@@ -805,33 +824,68 @@ + PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego); + udelay(100); + ++#ifdef CONFIG_LINKSTATION ++void miconCntl_FanLow(void); ++void miconCntl_FanHigh(void); ++void miconCntl_Eth1000M(int up); ++void miconCntl_Eth100M(int up); ++void miconCntl_Eth10M(int up); ++void miconCntl_5f(void); ++ ++ miconCntl_FanLow(); ++#endif ++ + /* wait for auto-negotiation process */ + for (i = 10000; i > 0; i--) { + /* check if auto-negotiation complete */ + if (mdio_read(PHY_STAT_REG) & PHY_Auto_Neco_Comp) { + udelay(100); + option = RTL_R8(PHYstatus); ++#if defined(CONFIG_LINKSTATION) && defined(CONFIG_HTGL) + if (option & _1000bpsF) { + #ifdef DEBUG_RTL8169 + printf("%s: 1000Mbps Full-duplex operation.\n", + dev->name); + #endif +- } else { ++ miconCntl_Eth1000M(1); ++ } else if (option & _100bps) { ++#ifdef DEBUG_RTL8169 ++ printf("%s: 100Mbps %s-duplexoperation.\n", ++ dev->name, ++ (option & FullDup) ? "Full" : "Half"); ++#endif ++ miconCntl_Eth100M(1); ++ } else if (option & _10bps) { + #ifdef DEBUG_RTL8169 + printf +- ("%s: %sMbps %s-duplex operation.\n", ++ ("%s: 10Mbps %s-duplex operation.\n", + dev->name, +- (option & _100bps) ? "100" : +- "10", +- (option & FullDup) ? "Full" : +- "Half"); ++ (option & FullDup) ? "Full" : "Half"); ++#endif ++ miconCntl_Eth100M(1); ++ } ++ miconCntl_5f(); ++#else /* !defined(CONFIG_LINKSTATION) || !defined(CONFIG_HTGL) */ ++ if (option & _1000bpsF) { ++#ifdef DEBUG_RTL8169 ++ printf("%s: 1000Mbps Full-duplex operation.\n", ++ dev->name); ++#endif ++ miconCntl_FanHigh(); ++ } else { ++#ifdef DEBUG_RTL8169 ++ printk("%s: %sMbps %s-duplex operation.\n", ++ dev->name, ++ (option & _100bps) ? "100" : "10", ++ (option & FullDup) ? "Full" : "Half"); + #endif + } ++#endif + break; + } else { + udelay(100); + } +- } /* end for-loop to wait for auto-negotiation process */ ++ } /* end for-loop to wait for auto-negotiation process */ + + } else { + udelay(100); +@@ -886,3 +940,5 @@ + } + + #endif ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/fs/ext2/ext2fs.c u-boot-86xx-kuro_clean/fs/ext2/ext2fs.c +--- u-boot-86xx/fs/ext2/ext2fs.c 2006-10-13 00:27:17.000000000 +0200 ++++ u-boot-86xx-kuro_clean/fs/ext2/ext2fs.c 2006-11-06 22:05:38.000000000 +0100 +@@ -35,6 +35,8 @@ + + /* Magic value used to identify an ext2 filesystem. */ + #define EXT2_MAGIC 0xEF53 ++/* Magic value used to identify Buffalo's idea of ext2 */ ++#define LINKSTATION_MAGIC 0xEF54 + /* Amount of indirect blocks in an inode. */ + #define INDIRECT_BLOCKS 12 + /* Maximum lenght of a pathname. */ +@@ -851,7 +853,8 @@ + goto fail; + } + /* Make sure this is an ext2 filesystem. */ +- if (__le16_to_cpu (data->sblock.magic) != EXT2_MAGIC) { ++ if ((__le16_to_cpu (data->sblock.magic) != EXT2_MAGIC) && ++ (__le16_to_cpu (data->sblock.magic) != LINKSTATION_MAGIC)) { + goto fail; + } + data->diropen.data = data; +diff -urN u-boot-86xx/include/configs/linkstation.h u-boot-86xx-kuro_clean/include/configs/linkstation.h +--- u-boot-86xx/include/configs/linkstation.h 1970-01-01 01:00:00.000000000 +0100 ++++ u-boot-86xx-kuro_clean/include/configs/linkstation.h 2006-11-06 22:30:33.000000000 +0100 +@@ -0,0 +1,492 @@ ++/* ++ * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if 0 ++#define DEBUG ++#endif ++ ++/*----------------------------------------------------------------------- ++ * User configurable settings: ++ * Mandatory settings: ++ * CONFIG_IPADDR_LS - the IP address of the LinkStation ++ * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP ++ * Optional settins: ++ * CONFIG_NCIP_LS - the adress of the computer running net console ++ * if not configured, it will be set to ++ * CONFIG_SERVERIP_LS ++ */ ++ ++#define CONFIG_IPADDR_LS 192.168.11.150 ++#define CONFIG_SERVERIP_LS 192.168.11.149 ++ ++#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS) ++#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined ++#endif ++ ++#if !defined(CONFIG_NCIP_LS) ++#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS ++#endif ++ ++/*---------------------------------------------------------------------- ++ * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING ++ *---------------------------------------------------------------------*/ ++ ++#define CONFIG_MPC8245 1 ++#define CONFIG_LINKSTATION 1 ++ ++/*--------------------------------------- ++ * Supported models ++ * ++ * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN) ++ * LinkStation old model (CONFIG_LAN) - totally untested ++ * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN) ++ * ++ * Models not supported yet ++ * TeraStatin (CONFIG_HTGL) ++ */ ++ ++#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) ++#define CONFIG_IDENT_STRING " LinkStation / KuroBox" ++#elif defined(CONFIG_HGLAN) ++#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG" ++#elif defined(CONFIG_HTGL) ++#define CONFIG_IDENT_STRING " TeraStation" ++#else ++#error No LinkStation model defined ++#endif ++ ++#define CONFIG_BOOTDELAY 10 ++#define CONFIG_ZERO_BOOTDELAY_CHECK ++#undef CONFIG_BOOT_RETRY_TIME ++ ++#define CONFIG_AUTOBOOT_KEYED ++#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..." ++#define CONFIG_AUTOBOOT_STOP_STR "s" ++ ++#define CONFIG_COMMANDS (CFG_CMD_BDI | \ ++ CFG_CMD_LOADS | \ ++ CFG_CMD_LOADB | \ ++ CFG_CMD_FLASH | \ ++ CFG_CMD_MEMORY | \ ++ CFG_CMD_NET | \ ++ CFG_CMD_ENV | \ ++ CFG_CMD_IDE | \ ++ CFG_CMD_PCI | \ ++ CFG_CMD_BOOTD | \ ++ CFG_CMD_CONSOLE | \ ++ CFG_CMD_RUN | \ ++ CFG_CMD_ECHO | \ ++ CFG_CMD_DHCP | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_NFS | \ ++ CFG_CMD_EXT2 ) ++#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "=> " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++ ++#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) ++#define CFG_MAXARGS 16 /* Max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++#define CFG_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */ ++ ++//#define CONFIG_BOOTCOMMAND "run nfsboot" ++#define CONFIG_BOOTCOMMAND "run bootcmd1" ++#define CONFIG_BOOTARGS "root=/dev/hda1" ++#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm" ++ ++#define CFG_CONSOLE_IS_IN_ENV ++ ++#define XMK_STR(x) #x ++#define MK_STR(x) XMK_STR(x) ++ ++#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) ++#define UBFILE "share/u-boot/u-boot-hd.flash.bin" ++#elif defined(CONFIG_HGLAN) ++#define UBFILE "share/u-boot/u-boot-hg.flash.bin" ++#elif defined(CONFIG_HTGL) ++#define UBFILE "share/u-boot/u-boot-ht.flash.bin" ++#else ++#error No LinkStation model defined ++#endif ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "autoload=no\0" \ ++ "stdin=nc\0" \ ++ "stdout=nc\0" \ ++ "stderr=nc\0" \ ++ "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \ ++ "netmask=255.255.255.0\0" \ ++ "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \ ++ "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \ ++ "netretry=no\0" \ ++ "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \ ++ "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \ ++ "ldaddr=800000\0" \ ++ "hdpart=0:1\0" \ ++ "hdfile=boot/vmlinux.UBoot\0" \ ++ "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile}\0" \ ++ "boothd=setenv bootargs root=/dev/hda1;bootm ${ldaddr}\0" \ ++ "hdboot=run hdload boothd\0" \ ++ "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \ ++ "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \ ++ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ ++ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \ ++ "bootretry=30\0" \ ++ "bootcmd1=run hdboot;run flboot\0" \ ++ "bootcmd2=run flboot\0" \ ++ "bootcmd3=run emboot\0" \ ++ "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \ ++ "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \ ++ "ubpart=0:3\0" \ ++ "ubfile="UBFILE"\0" \ ++ "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \ ++ "ubsaddr=fff00000\0" \ ++ "ubeaddr=fff2ffff\0" \ ++ "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \ ++ "upgrade=run ubload ubflash\0" ++ ++/*----------------------------------------------------------------------- ++ * PCI stuff ++ */ ++#define CONFIG_PCI ++#undef CONFIG_PCI_PNP ++#define CONFIG_PCI_SCAN_SHOW ++ ++#ifndef CONFIG_PCI_PNP ++/* Keep the following defines in sync with the BAT mappings */ ++ ++#define PCI_ETH_IOADDR 0xbfff00 ++#define PCI_ETH_MEMADDR 0xbffffc00 ++#define PCI_IDE_IOADDR 0xbffed0 ++#define PCI_IDE_MEMADDR 0xbffffb00 ++#define PCI_USB0_IOADDR 0 ++#define PCI_USB0_MEMADDR 0xbfffe000 ++#define PCI_USB1_IOADDR 0 ++#define PCI_USB1_MEMADDR 0xbfffd000 ++#define PCI_USB2_IOADDR 0 ++#define PCI_USB2_MEMADDR 0xbfffcf00 ++ ++#endif ++ ++/*----------------------------------------------------------------------- ++ * Ethernet stuff ++ */ ++#define CONFIG_NET_MULTI ++ ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) ++#define CONFIG_TULIP ++#define CONFIG_TULIP_USE_IO ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++#define CONFIG_RTL8169 ++#endif ++ ++#define CONFIG_NET_RETRY_COUNT 5 ++ ++#define CONFIG_NETCONSOLE ++ ++/*----------------------------------------------------------------------- ++ * Start addresses for the final memory configuration ++ * (Set up by the startup code) ++ * Please note that CFG_SDRAM_BASE _must_ start at 0 ++ */ ++#define CFG_SDRAM_BASE 0x00000000 ++ ++#define CFG_FLASH_BASE 0xFFC00000 ++#define CFG_MONITOR_BASE TEXT_BASE ++ ++#define CFG_RESET_ADDRESS 0xFFF00100 ++#define CFG_EUMB_ADDR 0x80000000 ++#define CFG_PCI_MEM_ADDR 0xB0000000 ++#define CFG_MISC_REGION_ADDR 0xFE000000 ++ ++#define CFG_MONITOR_LEN 0x00040000 /* 256 kB */ ++#define CFG_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */ ++ ++#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */ ++ ++/* Maximum amount of RAM */ ++#if defined(CONFIG_HLAN) || defined(CONFIG_LAN) ++#define CFG_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */ ++#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL) ++#define CFG_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */ ++#else ++#error Unknown LinkStation type ++#endif ++ ++/*----------------------------------------------------------------------- ++ * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build ++ * ++ * RAM based builds are for testing purposes. A Linux module, uloader.o, ++ * exists to load U-Boot and pass control to it ++ * ++ * Always do "make clean" after changing the build type ++ */ ++#if CFG_MONITOR_BASE < CFG_FLASH_BASE ++#define CFG_RAMBOOT ++#endif ++ ++/*----------------------------------------------------------------------- ++ * Definitions for initial stack pointer and data area ++ */ ++#if 1 /* RAM is available when the first C function is called */ ++#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + CFG_MAX_RAM_SIZE - 0x1000) ++#else ++#define CFG_INIT_RAM_ADDR 0x40000000 ++#endif ++#define CFG_INIT_RAM_END 0x1000 ++#define CFG_GBL_DATA_SIZE 128 ++#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) ++ ++/*---------------------------------------------------------------------- ++ * Serial configuration ++ */ ++#define CONFIG_CONS_INDEX 1 ++#define CONFIG_BAUDRATE 57600 ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_NS16550 ++#define CFG_NS16550_SERIAL ++ ++#define CFG_NS16550_REG_SIZE 1 ++ ++#define CFG_NS16550_CLK get_bus_freq(0) ++ ++#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4600) /* Console port */ ++#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4500) /* AVR port */ ++ ++/* ++ * Low Level Configuration Settings ++ * (address mappings, register initial values, etc.) ++ * You should know what you are doing if you make changes here. ++ * For the detail description refer to the MPC8245 user's manual. ++ * ++ * Unless indicated otherwise, the values are ++ * taken from the orignal Linkstation boot code ++ * ++ * Most of the low level configuration setttings are normally used ++ * in cpu/mpc824x/cpu_init.c which is NOT used by this implementation. ++ * Low level initialisation is done in board/linkstation/early_init.S ++ * The values below are included for reference purpose only ++ */ ++ ++/* FIXME: 32.768 MHz is the crystal frequency but */ ++/* the real frequency is lower by about 0.75% */ ++#define CONFIG_SYS_CLK_FREQ 32768000 ++#define CFG_HZ 1000 ++ ++/* Bit-field values for MCCR1. */ ++#define CFG_ROMNAL 0 ++#define CFG_ROMFAL 11 ++ ++#define CFG_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */ ++#define CFG_BANK1_ROW 0 ++#define CFG_BANK2_ROW 0 ++#define CFG_BANK3_ROW 0 ++#define CFG_BANK4_ROW 0 ++#define CFG_BANK5_ROW 0 ++#define CFG_BANK6_ROW 0 ++#define CFG_BANK7_ROW 0 ++ ++/* Bit-field values for MCCR2. */ ++#define CFG_TSWAIT 0 ++#define CFG_REFINT 1400 ++ ++/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */ ++#define CFG_BSTOPRE 121 ++ ++/* Bit-field values for MCCR3. */ ++#define CFG_REFREC 7 ++ ++/* Bit-field values for MCCR4. */ ++#define CFG_PRETOACT 2 ++#define CFG_ACTTOPRE 5 /* Original value was 2 */ ++#define CFG_ACTORW 2 ++#define CFG_SDMODE_CAS_LAT 2 /* For 100MHz bus. Use 3 for 133MHz */ ++#define CFG_REGISTERD_TYPE_BUFFER 1 ++#define CFG_EXTROM 1 /* Original setting but there is no EXTROM */ ++#define CFG_REGDIMM 0 ++#define CFG_DBUS_SIZE2 1 ++#define CFG_SDMODE_WRAP 0 ++ ++#define CFG_PGMAX 0x32 /* All boards use this setting. Original 0x92 */ ++#define CFG_SDRAM_DSCD 0x30 ++ ++/* Memory bank settings. ++ * Only bits 20-29 are actually used from these vales to set the ++ * start/end addresses. The upper two bits will always be 0, and the lower ++ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end ++ * address. Refer to the MPC8240 book. ++ */ ++ ++#define CFG_BANK0_START 0x00000000 ++#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1) ++#define CFG_BANK0_ENABLE 1 ++#define CFG_BANK1_START 0x3ff00000 ++#define CFG_BANK1_END 0x3fffffff ++#define CFG_BANK1_ENABLE 0 ++#define CFG_BANK2_START 0x3ff00000 ++#define CFG_BANK2_END 0x3fffffff ++#define CFG_BANK2_ENABLE 0 ++#define CFG_BANK3_START 0x3ff00000 ++#define CFG_BANK3_END 0x3fffffff ++#define CFG_BANK3_ENABLE 0 ++#define CFG_BANK4_START 0x3ff00000 ++#define CFG_BANK4_END 0x3fffffff ++#define CFG_BANK4_ENABLE 0 ++#define CFG_BANK5_START 0x3ff00000 ++#define CFG_BANK5_END 0x3fffffff ++#define CFG_BANK5_ENABLE 0 ++#define CFG_BANK6_START 0x3ff00000 ++#define CFG_BANK6_END 0x3fffffff ++#define CFG_BANK6_ENABLE 0 ++#define CFG_BANK7_START 0x3ff00000 ++#define CFG_BANK7_END 0x3fffffff ++#define CFG_BANK7_ENABLE 0 ++ ++#define CFG_ODCR 0x95 /* 0x15 or 0x95 ? */ ++ ++/*---------------------------------------------------------------------- ++ * Initial BAT mappings ++ */ ++ ++/* NOTES: ++ * 1) GUARDED and WRITETHROUGH not allowed in IBATS ++ * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT ++ */ ++ ++/* SDRAM */ ++#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) ++#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) ++ ++#define CFG_DBAT0L CFG_IBAT0L ++#define CFG_DBAT0U CFG_IBAT0U ++ ++/* EUMB: 1MB of address space */ ++#define CFG_IBAT1L (CFG_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) ++#define CFG_IBAT1U (CFG_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP) ++ ++#define CFG_DBAT1L (CFG_IBAT1L | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT1U CFG_IBAT1U ++ ++/* PCI Mem: 256MB of address space */ ++#define CFG_IBAT2L (CFG_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) ++#define CFG_IBAT2U (CFG_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP) ++ ++#define CFG_DBAT2L (CFG_IBAT2L | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT2U CFG_IBAT2U ++ ++/* PCI and local ROM/Flash: last 32MB of address space */ ++#define CFG_IBAT3L (CFG_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT) ++#define CFG_IBAT3U (CFG_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP) ++ ++#define CFG_DBAT3L (CFG_IBAT3L | BATL_GUARDEDSTORAGE) ++#define CFG_DBAT3U CFG_IBAT3U ++ ++/* ++ * For booting Linux, the board info and command line data ++ * have to be in the first 8 MB of memory, since this is ++ * the maximum mapped by the Linux kernel during initialization. ++ * ++ * FIXME: This doesn't appear to be true for the newer kernels ++ * which map more that 8 MB ++ */ ++#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ ++ ++/*----------------------------------------------------------------------- ++ * FLASH organization ++ */ ++#undef CFG_FLASH_PROTECTION ++#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ ++#define CFG_MAX_FLASH_SECT 72 /* Max number of sectors per flash */ ++ ++#define CFG_FLASH_ERASE_TOUT 12000 ++#define CFG_FLASH_WRITE_TOUT 1000 ++ ++ ++#define CFG_ENV_IS_IN_FLASH ++/* ++ * The original LinkStation flash organisation uses ++ * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader ++ * We use the last sector of this area to store the environment ++ * which leaves max. 384 kB for the U-Boot itself ++ */ ++#define CFG_ENV_ADDR 0xFFF60000 ++#define CFG_ENV_SIZE 0x00010000 ++#define CFG_ENV_SECT_SIZE 0x00010000 ++ ++/*----------------------------------------------------------------------- ++ * Cache Configuration ++ */ ++#define CFG_CACHELINE_SIZE 32 ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ ++#endif ++ ++/*----------------------------------------------------------------------- ++ * IDE/ATA definitions ++ */ ++#undef CONFIG_IDE_LED /* No IDE LED */ ++#define CONFIG_IDE_RESET /* no reset for ide supported */ ++#define CONFIG_IDE_PREINIT /* check for units */ ++#define CONFIG_LBA48 /* 48 bit LBA supported */ ++ ++#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN) ++#define CFG_IDE_MAXBUS 1 /* Scan only 1 IDE bus */ ++#define CFG_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */ ++#elif defined(CONFIG_HGTL) ++#define CFG_IDE_MAXBUS 2 /* Max. 2 IDE busses */ ++#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ ++#else ++#error Config IDE: Unknown LinkStation type ++#endif ++ ++#define CFG_ATA_BASE_ADDR 0 ++ ++#define CFG_ATA_DATA_OFFSET 0 /* Offset for data I/O */ ++#define CFG_ATA_REG_OFFSET 0 /* Offset for normal registers */ ++#define CFG_ATA_ALT_OFFSET 0 /* Offset for alternate registers */ ++ ++/*----------------------------------------------------------------------- ++ * Partitions and file system ++ */ ++#define CONFIG_DOS_PARTITION ++ ++/*----------------------------------------------------------------------- ++ * Internal Definitions ++ * ++ * Boot Flags ++ */ ++#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ ++#define BOOTFLAG_WARM 0x02 /* Software reboot */ ++ ++#endif /* __CONFIG_H */ ++ ++/* vim: set ts=4: */ +diff -urN u-boot-86xx/include/devices.h u-boot-86xx-kuro_clean/include/devices.h +--- u-boot-86xx/include/devices.h 2006-10-13 00:27:18.000000000 +0200 ++++ u-boot-86xx-kuro_clean/include/devices.h 2006-11-06 22:05:38.000000000 +0100 +@@ -93,6 +93,7 @@ + int devices_init (void); + int devices_done (void); + int device_deregister(char *devname); ++int console_setfile (int file, device_t * dev); + #ifdef CONFIG_LCD + int drv_lcd_init (void); + #endif +@@ -111,5 +112,8 @@ + #ifdef CONFIG_NETCONSOLE + int drv_nc_init (void); + #endif ++#if defined(CFG_CONSOLE_IS_IN_ENV) || defined(CONFIG_SPLASH_SCREEN) || defined(CONFIG_SILENT_CONSOLE) ++device_t *search_device (int flags, char *name); ++#endif + + #endif /* _DEVICES_H_ */ +diff -urN u-boot-86xx/include/flash.h u-boot-86xx-kuro_clean/include/flash.h +--- u-boot-86xx/include/flash.h 2006-10-13 00:27:18.000000000 +0200 ++++ u-boot-86xx-kuro_clean/include/flash.h 2006-11-06 22:05:38.000000000 +0100 +@@ -215,6 +215,8 @@ + + #define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */ + #define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */ ++#define AMD_ID_LV320T_2 0x221A221A /* 2d ID word for AM29LV320MT at 0x38 */ ++#define AMD_ID_LV320T_3 0x22012201 /* 3d ID word for AM29LV320MT at 0x3c */ + + #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ + #define AMD_ID_LV650U 0x22D722D7 /* 29LV650U ID (64 M, uniform sectors) */ +@@ -246,6 +248,8 @@ + #define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */ + #define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */ + #define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */ ++#define STM_ID_29W324DT 0x225C225C /* M29W324DT ID (32 M, top boot sector) */ ++#define STM_ID_29W324DB 0x225D225D /* M29W324DB ID (32 M, bottom boot sect) */ + #define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */ + #define FLASH_PSD4256GV 0x00E9 /* PSD4256 Flash and CPLD combination */ + +@@ -353,6 +357,8 @@ + #define FLASH_STM800AB 0x0051 /* STM M29WF800AB ( 8M = 512K x 16 ) */ + #define FLASH_STMW320DT 0x0052 /* STM M29W320DT (32 M, top boot sector) */ + #define FLASH_STMW320DB 0x0053 /* STM M29W320DB (32 M, bottom boot sect)*/ ++#define FLASH_STMW324DT 0x005C /* STM M29W320DT (32 M, top boot sector) */ ++#define FLASH_STMW324DB 0x005D /* STM M29W320DB (32 M, bottom boot sect)*/ + #define FLASH_STM320DB 0x00CB /* STM M29W320DB (4M = 64K x 64, bottom)*/ + #define FLASH_STM800DT 0x00D7 /* STM M29W800DT (1M = 64K x 16, top) */ + #define FLASH_STM800DB 0x005B /* STM M29W800DB (1M = 64K x 16, bottom)*/ +diff -urN u-boot-86xx/include/pci_ids.h u-boot-86xx-kuro_clean/include/pci_ids.h +--- u-boot-86xx/include/pci_ids.h 2006-10-13 00:27:18.000000000 +0200 ++++ u-boot-86xx-kuro_clean/include/pci_ids.h 2006-11-06 22:05:38.000000000 +0100 +@@ -1473,6 +1473,8 @@ + #define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801 + #define PCI_DEVICE_ID_ITE_IT8181 0x8181 + #define PCI_DEVICE_ID_ITE_8872 0x8872 ++#define PCI_DEVICE_ID_ITE_8211 0x8211 ++#define PCI_DEVICE_ID_ITE_8212 0x8212 + + #define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 + +diff -urN u-boot-86xx/lib_ppc/board.c u-boot-86xx-kuro_clean/lib_ppc/board.c +--- u-boot-86xx/lib_ppc/board.c 2006-10-13 00:27:19.000000000 +0200 ++++ u-boot-86xx-kuro_clean/lib_ppc/board.c 2006-11-06 22:05:38.000000000 +0100 +@@ -439,6 +439,10 @@ + */ + addr -= len; + addr &= ~(4096 - 1); ++#ifdef CONFIG_LINKSTATION ++ /* U-Boot code at 1 MB boundary to make it easier to debug */ ++ addr &= ~(1048576 - 1); ++#endif + #ifdef CONFIG_E500 + /* round down to next 64 kB limit so that IVPR stays aligned */ + addr &= ~(65536 - 1); +@@ -895,8 +899,10 @@ + /* Initialize the jump table for applications */ + jumptable_init (); + ++#if !defined(CONFIG_LINKSTATION) + /* Initialize the console (after the relocation and devices init) */ + console_init_r (); ++#endif + + #if defined(CONFIG_CCM) || \ + defined(CONFIG_COGENT) || \ +@@ -949,6 +955,7 @@ + if ((s = getenv ("loadaddr")) != NULL) { + load_addr = simple_strtoul (s, NULL, 16); + } ++ debug("load_addr: %08lx\n", load_addr); + #if (CONFIG_COMMANDS & CFG_CMD_NET) + if ((s = getenv ("bootfile")) != NULL) { + copy_filename (BootFile, s, sizeof (BootFile)); +@@ -998,6 +1005,11 @@ + reset_phy (); + #endif + ++#if defined(CONFIG_LINKSTATION) ++ /* The LinkStation uses the net console by default */ ++ console_init_r (); ++#endif ++ + #ifdef CONFIG_POST + post_run (NULL, POST_RAM | post_bootmode_get(0)); + #endif +diff -urN u-boot-86xx/lib_ppc/interrupts.c u-boot-86xx-kuro_clean/lib_ppc/interrupts.c +--- u-boot-86xx/lib_ppc/interrupts.c 2006-10-13 00:27:19.000000000 +0200 ++++ u-boot-86xx-kuro_clean/lib_ppc/interrupts.c 2006-11-06 22:05:38.000000000 +0100 +@@ -40,7 +40,7 @@ + #endif + + extern int interrupt_init_cpu (unsigned *); +-extern void timer_interrupt_cpu (struct pt_regs *); ++extern void timer_interrupt_cpu (struct pt_regs *, ulong timestamp); + + static unsigned decrementer_count; /* count value for 1e6/HZ microseconds */ + +@@ -111,7 +111,7 @@ + void timer_interrupt (struct pt_regs *regs) + { + /* call cpu specific function from $(CPU)/interrupts.c */ +- timer_interrupt_cpu (regs); ++ timer_interrupt_cpu (regs, timestamp); + + /* Restore Decrementer Count */ + set_dec (decrementer_count); +diff -urN u-boot-86xx/net/net.c u-boot-86xx-kuro_clean/net/net.c +--- u-boot-86xx/net/net.c 2006-10-13 00:27:19.000000000 +0200 ++++ u-boot-86xx-kuro_clean/net/net.c 2006-11-06 22:05:38.000000000 +0100 +@@ -641,6 +641,11 @@ + { + uchar *pkt; + ++#ifdef ET_DEBUG ++ printf("%s dest: %08lx, dport: %d, sport: %d, len: %d\n", ++ __FUNCTION__, dest, dport, sport, len); ++#endif ++ + /* convert to new style broadcast */ + if (dest == 0) + dest = 0xFFFFFFFF; +@@ -758,6 +763,8 @@ + IPaddr_t tmp; + volatile IP_t *ip = (volatile IP_t *)pkt; + ++ if (!pkt && !dest && !src && !len) /* ARP packet */ ++ return; + tmp = NetReadIP((void *)&ip->ip_src); + if (tmp != NetPingIP) + return; +@@ -1146,7 +1153,7 @@ + ushort cti = 0, vlanid = VLAN_NONE, myvlanid, mynvlanid; + + #ifdef ET_DEBUG +- printf("packet received\n"); ++ printf("%s: packet received\n", __FUNCTION__); + #endif + + NetRxPkt = inpkt; +@@ -1171,10 +1178,6 @@ + + x = ntohs(et->et_protlen); + +-#ifdef ET_DEBUG +- printf("packet received\n"); +-#endif +- + if (x < 1514) { + /* + * Got a 802 packet. Check the other protocol field. +@@ -1305,13 +1308,16 @@ + /* matched waiting packet's address */ + if (tmp == NetArpWaitReplyIP) { + #ifdef ET_DEBUG +- puts ("Got it\n"); ++ puts ("ARP reply IP matches original pkt IP\n"); + #endif + /* save address for later use */ + memcpy(NetArpWaitPacketMAC, &arp->ar_data[0], 6); + + #ifdef CONFIG_NETCONSOLE +- (*packetHandler)(0,0,0,0); ++ if (packetHandler) ++ (*packetHandler)(0,0,0,0); ++ else ++ printf("ARP: NULL packetHandler\n"); + #endif + /* modify header, and transmit it */ + memcpy(((Ethernet_t *)NetArpWaitTxPacket)->et_dest, NetArpWaitPacketMAC, 6); +@@ -1354,7 +1360,10 @@ + NetCopyIP(&NetServerIP, &arp->ar_data[ 6]); + memcpy (NetServerEther, &arp->ar_data[ 0], 6); + +- (*packetHandler)(0,0,0,0); ++ if (packetHandler) ++ (*packetHandler)(0,0,0,0); ++ else ++ printf("ARP: NULL packetHandler\n"); + } + break; + +diff -urN u-boot-86xx/net/nfs.c u-boot-86xx-kuro_clean/net/nfs.c +--- u-boot-86xx/net/nfs.c 2006-10-13 00:27:19.000000000 +0200 ++++ u-boot-86xx-kuro_clean/net/nfs.c 2006-11-06 22:05:38.000000000 +0100 +@@ -29,7 +29,7 @@ + #include "nfs.h" + #include "bootp.h" + +-/*#define NFS_DEBUG*/ ++#undef NFS_DEBUG + + #if ((CONFIG_COMMANDS & CFG_CMD_NET) && (CONFIG_COMMANDS & CFG_CMD_NFS)) + +@@ -180,6 +180,9 @@ + int sport; + + id = ++rpc_id; ++#ifdef NFS_DEBUG ++ printf ("%s xid: %d, rpc_id: %d\n", __FUNCTION__, id, rpc_id); ++#endif + pkt.u.call.id = htonl(id); + pkt.u.call.type = htonl(MSG_CALL); + pkt.u.call.rpcvers = htonl(2); /* use RPC version 2 */ +@@ -213,6 +216,10 @@ + { + uint32_t data[16]; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + data[0] = 0; data[1] = 0; /* auth credential */ + data[2] = 0; data[3] = 0; /* auth verifier */ + data[4] = htonl(prog); +@@ -234,6 +241,10 @@ + int len; + int pathlen; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + pathlen = strlen (path); + + p = &(data[0]); +@@ -259,6 +270,10 @@ + uint32_t *p; + int len; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + if ((NfsSrvMountPort == -1) || (!fs_mounted)) { + /* Nothing mounted, nothing to umount */ + return; +@@ -286,6 +301,10 @@ + uint32_t *p; + int len; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + p = &(data[0]); + p = (uint32_t *)rpc_add_credentials ((long *)p); + +@@ -308,6 +327,10 @@ + int len; + int fnamelen; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + fnamelen = strlen (fname); + + p = &(data[0]); +@@ -335,6 +358,10 @@ + uint32_t *p; + int len; + ++#ifdef NFS_DEBUG ++ printf ("%s\n", __FUNCTION__); ++#endif ++ + p = &(data[0]); + p = (uint32_t *)rpc_add_credentials ((long *)p); + +@@ -405,8 +432,13 @@ + + if (rpc_pkt.u.reply.rstatus || + rpc_pkt.u.reply.verifier || +- rpc_pkt.u.reply.astatus || + rpc_pkt.u.reply.astatus) { ++#ifdef NFS_DEBUG ++ printf ("rstatus: %d\n", rpc_pkt.u.reply.rstatus); ++ printf ("verifier: %08lx\n", rpc_pkt.u.reply.verifier); ++ printf ("v2: %08lx\n", rpc_pkt.u.reply.v2); ++ printf ("astatus: %d\n", rpc_pkt.u.reply.astatus); ++#endif + return -1; + } + +@@ -433,13 +465,24 @@ + + memcpy ((unsigned char *)&rpc_pkt, pkt, len); + +- if (ntohl(rpc_pkt.u.reply.id) != rpc_id) ++ if (ntohl(rpc_pkt.u.reply.id) != rpc_id) { ++#ifdef NFS_DEBUG ++ printf ("rpc_id error. expected: %d, got: %d\n", \ ++ rpc_id, ntohl(rpc_pkt.u.reply.id)); ++#endif + return -1; ++ } + + if (rpc_pkt.u.reply.rstatus || + rpc_pkt.u.reply.verifier || + rpc_pkt.u.reply.astatus || + rpc_pkt.u.reply.data[0]) { ++#ifdef NFS_DEBUG ++ printf ("rstatus: %d\n", rpc_pkt.u.reply.rstatus); ++ printf ("verifier: %08lx\n", rpc_pkt.u.reply.verifier); ++ printf ("astatus: %d\n", rpc_pkt.u.reply.astatus); ++ printf ("data[0]: %08lx\n", rpc_pkt.u.reply.data[0]); ++#endif + return -1; + } + +@@ -544,7 +587,7 @@ + struct rpc_t rpc_pkt; + int rlen; + +-#ifdef NFS_DEBUG_nop ++#ifdef NFS_DEBUG + printf ("%s\n", __FUNCTION__); + #endif + +@@ -601,6 +644,8 @@ + printf ("%s\n", __FUNCTION__); + #endif + ++ if (!pkt && !dest && !src && !len) /* ARP packet */ ++ return; + if (dest != NfsOurPort) return; + + switch (NfsState) { +diff -urN u-boot-86xx/tools/Makefile u-boot-86xx-kuro_clean/tools/Makefile +--- u-boot-86xx/tools/Makefile 2006-10-13 00:27:19.000000000 +0200 ++++ u-boot-86xx-kuro_clean/tools/Makefile 2006-11-06 22:18:42.000000000 +0100 +@@ -21,10 +21,10 @@ + # MA 02111-1307 USA + # + +-BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ++BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ncb$(SFX) + + OBJ_LINKS = environment.o crc32.o +-OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o ++OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o ncb.o + + ifeq ($(ARCH),mips) + BIN_FILES += inca-swap-bytes$(SFX) diff --git a/packages/uboot/u-boot-linkstationppc_git.bb b/packages/uboot/u-boot-linkstationppc_git.bb new file mode 100644 index 0000000000..2fe2f9e7ff --- /dev/null +++ b/packages/uboot/u-boot-linkstationppc_git.bb @@ -0,0 +1,40 @@ +DESCRIPTION = "U-boot bootloader" +PROVIDES = "virtual/bootloader" +SECTION = "bootloader" +PRIORITY = "optional" +LICENSE = "GPL" + +DEFAULT_PREFERENCE = "-1" +COMPATIBLE_MACHINE = "linkstationppc" + +SRC_URI = "git://www.jdl.com/software/u-boot-86xx.git;protocol=git \ + file://u-boot-kurobox.patch;patch=1 \ + file://u-boot-kurobox-fdt.patch;patch=1 \ + file://defconfig_linkstationppchg \ + file://defconfig_linkstationppchd \ + " + +S = "${WORKDIR}/git" + +EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +do_compile () { + unset LDFLAGS CFLAGS CPPFLAGS + cp ${WORKDIR}/defconfig_${MACHINE} ${WORKDIR}/git/include/configs/linkstation.h + oe_runmake ${UBOOT_MACHINE}_config + oe_runmake ${UBOOT_MACHINE} +} + +do_stage() { + install -m 755 tools/mkimage ${STAGING_BINDIR_NATIVE} +} + +do_deploy () { + install -d ${DEPLOY_DIR_IMAGE} + install ${S}/u-boot-h*.flash.bin ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}-${PV}-${PR}.bin +} + +do_deploy[dirs] = "${S}" +addtask deploy before do_build after do_compile |