diff options
Diffstat (limited to 'packages')
31 files changed, 4996 insertions, 0 deletions
diff --git a/packages/linux/linux/acern30/.mtn2git_empty b/packages/linux/linux/acern30/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux/acern30/.mtn2git_empty diff --git a/packages/linux/linux/acern30/defconfig b/packages/linux/linux/acern30/defconfig new file mode 100644 index 0000000000..860dc9b12c --- /dev/null +++ b/packages/linux/linux/acern30/defconfig @@ -0,0 +1,1199 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-h1940 +# Mon Jan 9 17:37:51 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_SHMEM is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# S3C24XX Implementations +# +# CONFIG_MACH_ANUBIS is not set +# CONFIG_ARCH_BAST is not set +CONFIG_ARCH_H1940=y +CONFIG_MACH_N30=y +CONFIG_MACH_N35=y +# CONFIG_ARCH_SMDK2410 is not set +# CONFIG_ARCH_S3C2440 is not set +# CONFIG_MACH_VR1000 is not set +# CONFIG_MACH_RX3715 is not set +# CONFIG_MACH_OTOM is not set +# CONFIG_MACH_NEXCODER_2440 is not set +CONFIG_CPU_S3C2410=y + +# +# S3C2410 Boot +# + +# +# S3C2410 Setup +# +CONFIG_S3C2410_DMA=y +# CONFIG_S3C2410_DMA_DEBUG is not set +CONFIG_S3C2410_PM_DEBUG=y +CONFIG_S3C2410_PM_CHECK=y +CONFIG_S3C2410_PM_CHECK_CHUNKSIZE=64 +CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_PREEMPT is not set +CONFIG_NO_IDLE_HZ=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="rw root=/dev/ram console=tty0 console=ttySAC2,115200n8 verbose panic=30" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=y +CONFIG_IRCOMM=y +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +CONFIG_IRDA_DEBUG=y + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=y + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_S3C2410=y +# CONFIG_MTD_NAND_S3C2410_DEBUG is not set +CONFIG_MTD_NAND_S3C2410_HWECC=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=320 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_S3C2410_BUTTONS=y +CONFIG_INPUT_MOUSE=y +# CONFIG_MOUSE_PS2 is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_S3C2410=y +# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_S3C2410=y +CONFIG_SERIAL_S3C2410_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=10 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +CONFIG_S3C2410_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_S3C2410=y +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C2410=y +# CONFIG_FB_S3C2410_DEBUG is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_CLEAN_4x6 is not set +CONFIG_FONT_CLEAN_5x8=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_S3C2410=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_SEQUENCER=y +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=y +# CONFIG_USB_SERIAL_CONSOLE is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set +CONFIG_USB_SERIAL_PL2303=y +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_S3C2410=y +CONFIG_USB_S3C2410=y +# CONFIG_USB_S3C2410_DEBUG is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_S3C2410=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +CONFIG_DEBUG_S3C2410_PORT=y +CONFIG_DEBUG_S3C2410_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/linux/acern30/gcc4-fixes.patch b/packages/linux/linux/acern30/gcc4-fixes.patch new file mode 100644 index 0000000000..722bca7c73 --- /dev/null +++ b/packages/linux/linux/acern30/gcc4-fixes.patch @@ -0,0 +1,97 @@ +--- linux-2.6.14/arch/arm/mm/alignment.c.org 2007-03-06 22:50:23.000000000 +0000 ++++ linux-2.6.14/arch/arm/mm/alignment.c 2007-03-06 22:49:21.000000000 +0000 +@@ -110,7 +110,7 @@ + return len; + } + +-static int proc_alignment_write(struct file *file, const char __user *buffer, ++static int proc_alignment_write(struct file *file, /*const*/ char __user *buffer, + unsigned long count, void *data) + { + char mode; +--- linux-2.6.14/lib/bitmap.c.org 2005-10-28 00:02:08.000000000 +0000 ++++ linux-2.6.14/lib/bitmap.c 2007-03-07 00:49:39.000000000 +0000 +@@ -345,11 +345,12 @@ + * characters and for grouping errors such as "1,,5", ",44", "," and "". + * Leading and trailing whitespace accepted, but not embedded whitespace. + */ +-int bitmap_parse(const char __user *ubuf, unsigned int ubuflen, ++int bitmap_parse(const char __user *_ubuf, unsigned int ubuflen, + unsigned long *maskp, int nmaskbits) + { + int c, old_c, totaldigits, ndigits, nchunks, nbits; + u32 chunk; ++ char __user *ubuf = _ubuf; + + bitmap_zero(maskp, nmaskbits); + +--- linux-2.6.14/arch/arm/nwfpe/fpa11_cpdt.c.org 2005-10-28 00:02:08.000000000 +0000 ++++ linux-2.6.14/arch/arm/nwfpe/fpa11_cpdt.c 2007-03-06 22:52:09.000000000 +0000 +@@ -29,14 +29,14 @@ + + #include <asm/uaccess.h> + +-static inline void loadSingle(const unsigned int Fn, const unsigned int __user *pMem) ++static inline void loadSingle(const unsigned int Fn, /*const*/ unsigned int __user *pMem) + { + FPA11 *fpa11 = GET_FPA11(); + fpa11->fType[Fn] = typeSingle; + get_user(fpa11->fpreg[Fn].fSingle, pMem); + } + +-static inline void loadDouble(const unsigned int Fn, const unsigned int __user *pMem) ++static inline void loadDouble(const unsigned int Fn, /*const*/ unsigned int __user *pMem) + { + FPA11 *fpa11 = GET_FPA11(); + unsigned int *p; +@@ -52,7 +52,7 @@ + } + + #ifdef CONFIG_FPE_NWFPE_XP +-static inline void loadExtended(const unsigned int Fn, const unsigned int __user *pMem) ++static inline void loadExtended(const unsigned int Fn, /*const*/ unsigned int __user *pMem) + { + FPA11 *fpa11 = GET_FPA11(); + unsigned int *p; +@@ -64,7 +64,7 @@ + } + #endif + +-static inline void loadMultiple(const unsigned int Fn, const unsigned int __user *pMem) ++static inline void loadMultiple(const unsigned int Fn, /*const*/ unsigned int __user *pMem) + { + FPA11 *fpa11 = GET_FPA11(); + register unsigned int *p; +--- linux-2.6.14/fs/proc/proc_misc.c.org 2005-10-28 00:02:08.000000000 +0000 ++++ linux-2.6.14/fs/proc/proc_misc.c 2007-03-06 23:17:01.000000000 +0000 +@@ -535,7 +535,7 @@ + /* + * writing 'C' to /proc/sysrq-trigger is like sysrq-C + */ +-static ssize_t write_sysrq_trigger(struct file *file, const char __user *buf, ++static ssize_t write_sysrq_trigger(struct file *file, /*const*/ char __user *buf, + size_t count, loff_t *ppos) + { + if (count) { +--- linux-2.6.14/drivers/char/vc_screen.c.org 2007-03-06 22:43:07.000000000 +0000 ++++ linux-2.6.14/drivers/char/vc_screen.c 2007-03-07 00:02:25.000000000 +0000 +@@ -419,7 +419,7 @@ + while (this_round > 1) { + unsigned short w; + +- w = get_unaligned(((const unsigned short *)con_buf0)); ++ w = get_unaligned(((/*const*/ unsigned short *)con_buf0)); + vcs_scr_writew(vc, w, org++); + con_buf0 += 2; + this_round -= 2; +--- linux-2.6.14/drivers/input/mousedev.c.org 2007-03-07 01:28:18.000000000 +0000 ++++ linux-2.6.14/drivers/input/mousedev.c 2007-03-07 01:37:01.000000000 +0000 +@@ -495,7 +495,7 @@ + } + + +-static ssize_t mousedev_write(struct file * file, const char __user * buffer, size_t count, loff_t *ppos) ++static ssize_t mousedev_write(struct file * file, /*const*/ char __user * buffer, size_t count, loff_t *ppos) + { + struct mousedev_list *list = file->private_data; + unsigned char c; diff --git a/packages/linux/linux/acern30/gpio-sysfs.patch b/packages/linux/linux/acern30/gpio-sysfs.patch new file mode 100644 index 0000000000..b3fde0f9d6 --- /dev/null +++ b/packages/linux/linux/acern30/gpio-sysfs.patch @@ -0,0 +1,252 @@ +This patch adds a lot of sysfs entries for the different GPIO lines. +It allows me to poke at different parts of the hardware to see what +happens. This allowed me to discover the Bluetooth cutoff switch for +example. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/Makefile +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Makefile ++++ linux-2.6.14/arch/arm/mach-s3c2410/Makefile +@@ -42,3 +42,5 @@ obj-$(CONFIG_MACH_VR1000) += mach-vr1000 + obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o + obj-$(CONFIG_MACH_OTOM) += mach-otom.o + obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o ++ ++obj-y += gpio-sysfs.o +Index: linux-2.6.14/arch/arm/mach-s3c2410/gpio-sysfs.c +=================================================================== +--- /dev/null ++++ linux-2.6.14/arch/arm/mach-s3c2410/gpio-sysfs.c +@@ -0,0 +1,232 @@ ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/backlight.h> ++#include <linux/notifier.h> ++#include <linux/ctype.h> ++#include <linux/err.h> ++#include <linux/fb.h> ++#include <asm/bug.h> ++ ++#include <asm/arch/regs-gpio.h> ++ ++#include <asm/arch/regs-clock.h> ++ ++static ssize_t s3c2410_gpio_name_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", pdev->id); ++} ++ ++static ssize_t s3c2410_gpio_val_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ s3c2410_gpio_getpin(pdev->id) ? 1 : 0); ++} ++ ++static ssize_t s3c2410_gpio_val_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ int val; ++ char *endp; ++ ++ val = simple_strtoul(buf, &endp, 0); ++ if (*endp && !isspace(*endp)) ++ return -EINVAL; ++ ++ s3c2410_gpio_setpin(pdev->id, val ? 1 : 0); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(name, 0444, ++ s3c2410_gpio_name_show, ++ NULL); ++ ++static DEVICE_ATTR(val, 0666, ++ s3c2410_gpio_val_show, ++ s3c2410_gpio_val_store); ++ ++ ++static int __init s3c2410_gpio_probe(struct device *dev) ++{ ++ device_create_file(dev, &dev_attr_name); ++ device_create_file(dev, &dev_attr_val); ++ return 0; ++} ++ ++static int s3c2410_gpio_remove(struct device *dev) ++{ ++ return 0; ++} ++ ++static struct device_driver s3c2410_gpio_driver = { ++ .name = "s3c2410-gpio", ++ .bus = &platform_bus_type, ++ .probe = s3c2410_gpio_probe, ++ .remove = s3c2410_gpio_remove, ++}; ++ ++static struct platform_device s3c_device_gpio[32 * 8]; ++ ++static ssize_t s3c2410_clkslow_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); ++ ++ return snprintf(buf, PAGE_SIZE, "0x%08lx\n", clkslow); ++} ++ ++static ssize_t s3c2410_clkslow_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned long val; ++ char *endp; ++ ++ val = simple_strtoul(buf, &endp, 0); ++ if (*endp && !isspace(*endp)) ++ return -EINVAL; ++ ++ printk("CLKSLOW <= 0x%lx\n", val); ++ ++ __raw_writel(val, S3C2410_CLKSLOW); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(clkslow, 0666, ++ s3c2410_clkslow_show, ++ s3c2410_clkslow_store); ++ ++static ssize_t s3c2410_clkcon_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ unsigned long clkclkcon = __raw_readl(S3C2410_CLKCON); ++ ++ return snprintf(buf, PAGE_SIZE, "0x%08lx\n", clkclkcon); ++} ++ ++static ssize_t s3c2410_clkcon_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned long val; ++ char *endp; ++ ++ val = simple_strtoul(buf, &endp, 0); ++ if (*endp && !isspace(*endp)) ++ return -EINVAL; ++ ++ printk("CLKCON <= 0x%lx\n", val); ++ ++ __raw_writel(val, S3C2410_CLKCON); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(clkcon, 0666, ++ s3c2410_clkcon_show, ++ s3c2410_clkcon_store); ++ ++static ssize_t s3c2410_misccr_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ unsigned long misccr = __raw_readl(S3C2410_MISCCR); ++ ++ return snprintf(buf, PAGE_SIZE, "0x%08lx\n", misccr); ++} ++ ++static ssize_t s3c2410_misccr_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ unsigned long val; ++ char *endp; ++ ++ val = simple_strtoul(buf, &endp, 0); ++ if (*endp && !isspace(*endp)) ++ return -EINVAL; ++ ++ printk("MISCCR <= 0x%lx\n", val); ++ ++ __raw_writel(val, S3C2410_MISCCR); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(misccr, 0666, ++ s3c2410_misccr_show, ++ s3c2410_misccr_store); ++ ++static int __init s3c2410_regs_probe(struct device *dev) ++{ ++ device_create_file(dev, &dev_attr_clkslow); ++ device_create_file(dev, &dev_attr_clkcon); ++ device_create_file(dev, &dev_attr_misccr); ++ return 0; ++} ++ ++static int s3c2410_regs_remove(struct device *dev) ++{ ++ return 0; ++} ++ ++ ++static struct device_driver s3c2410_regs_driver = { ++ .name = "s3c2410-regs", ++ .bus = &platform_bus_type, ++ .probe = s3c2410_regs_probe, ++ .remove = s3c2410_regs_remove, ++}; ++ ++static struct platform_device s3c_device_regs = { ++ .name = "s3c2410-regs", ++ .id = -1, ++}; ++ ++static int __init s3c2410_gpio_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(s3c_device_gpio); i++) { ++ s3c_device_gpio[i].name = "s3c2410-gpio"; ++ s3c_device_gpio[i].id = i; ++ platform_device_register(&s3c_device_gpio[i]); ++ } ++ ++ driver_register(&s3c2410_gpio_driver); ++ driver_register(&s3c2410_regs_driver); ++ ++ platform_device_register(&s3c_device_regs); ++ ++ return 0; ++} ++ ++static void __exit s3c2410_gpio_cleanup(void) ++{ ++ driver_unregister(&s3c2410_regs_driver); ++ driver_unregister(&s3c2410_gpio_driver); ++} ++ ++module_init(s3c2410_gpio_init); ++module_exit(s3c2410_gpio_cleanup); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Christer Weinigel <christer@weinigel.se>"); ++MODULE_DESCRIPTION("S3C2410 GPIO Driver"); ++ ++/* ++ Local variables: ++ compile-command: "make -k -C ../../../.. linux " ++ c-basic-offset: 8 ++ End: ++*/ diff --git a/packages/linux/linux/acern30/mmc-plus.patch b/packages/linux/linux/acern30/mmc-plus.patch new file mode 100644 index 0000000000..d88ac531cf --- /dev/null +++ b/packages/linux/linux/acern30/mmc-plus.patch @@ -0,0 +1,17 @@ +Treat MMCA version 4 cards a version 3 cards. It seem to work for me, +but it may break things horribly. + +So you may not want to use this patch. + +Index: linux-2.6.14/drivers/mmc/mmc.c +=================================================================== +--- linux-2.6.14.orig/drivers/mmc/mmc.c ++++ linux-2.6.14/drivers/mmc/mmc.c +@@ -495,6 +495,7 @@ static void mmc_decode_cid(struct mmc_ca + + case 2: /* MMC v2.0 - v2.2 */ + case 3: /* MMC v3.1 - v3.3 */ ++ case 4: /* MMC Plus? */ + card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); + card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); + card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); diff --git a/packages/linux/linux/acern30/n30-apm.patch b/packages/linux/linux/acern30/n30-apm.patch new file mode 100644 index 0000000000..00b34c9a46 --- /dev/null +++ b/packages/linux/linux/acern30/n30-apm.patch @@ -0,0 +1,73 @@ +Implement a apm_get_power_status handler for the n30. The handler +gets the battery charge from the msp430 chip using i2c and sets the ac +line information based on GPG1 (charger power) and GPC7 (usb power). + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -31,6 +31,7 @@ + #include <linux/delay.h> + #include <linux/device.h> + #include <linux/kthread.h> ++#include <linux/i2c.h> + + #include <linux/mmc/protocol.h> + #include <linux/mtd/mtd.h> +@@ -44,6 +45,7 @@ + #include <asm/hardware/iomd.h> + #include <asm/io.h> + #include <asm/irq.h> ++#include <asm/apm.h> + #include <asm/mach-types.h> + + #include <asm/arch/regs-serial.h> +@@ -527,6 +529,37 @@ static int n30_usbstart_thread(void *unu + return 0; + } + ++#ifdef CONFIG_APM ++static void n30_get_power_status(struct apm_power_info *info) ++{ ++#ifdef CONFIG_I2C_S3C2410 ++ u8 charge; ++ struct i2c_adapter *adap; ++ struct i2c_msg msg[] = { ++ { .addr = 0x0b, .flags = I2C_M_RD, .buf = &charge, .len = 1 } ++ }; ++ ++ if ((adap = i2c_get_adapter(0)) != NULL) { ++ if (i2c_transfer(adap, msg, 1) == 1) ++ info->battery_life = charge; ++ i2c_put_adapter(adap); ++ } ++#endif ++ ++ if (s3c2410_gpio_getpin(S3C2410_GPC7)) ++ info->ac_line_status = 0x01; /* on charger power */ ++ else if (s3c2410_gpio_getpin(S3C2410_GPG1)) ++ info->ac_line_status = 0x02; /* on USB power */ ++ else ++ info->ac_line_status = 0x00; /* on battery power */ ++ ++ /* TODO I could put some values in these variables based on ++ * the battery life and the ac_line_status. --wingel */ ++ info->battery_status = 0xff; ++ info->battery_flag = 0xff; ++} ++#endif ++ + static void __init n30_init(void) + { + s3c24xx_fb_set_platdata(&n30_lcdcfg); +@@ -550,6 +583,10 @@ static void __init n30_init(void) + s3c2410_gpio_setpin(S3C2410_GPC5, 1); + + kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); ++ ++#ifdef CONFIG_APM ++ apm_get_power_status = n30_get_power_status; ++#endif + } + + MACHINE_START(N30, "Acer-N30") diff --git a/packages/linux/linux/acern30/n30-backlight.patch b/packages/linux/linux/acern30/n30-backlight.patch new file mode 100644 index 0000000000..2b339960f7 --- /dev/null +++ b/packages/linux/linux/acern30/n30-backlight.patch @@ -0,0 +1,97 @@ +This patch adds a few functions to control the backlight on the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -45,8 +45,10 @@ + #include <asm/arch/regs-serial.h> + #include <asm/arch/regs-gpio.h> + #include <asm/arch/regs-lcd.h> ++#include <asm/arch/regs-timer.h> + #include <asm/arch/iic.h> + #include <asm/arch/fb.h> ++#include <asm/arch/lcd.h> + + #include <linux/serial_core.h> + +@@ -121,9 +123,71 @@ static struct s3c2410fb_mach_info n30_lc + .bpp= {16,16,16}, + }; + ++static void n30_backlight_power(int on) ++{ ++ s3c2410_gpio_pullup(S3C2410_GPB1, 1); ++ s3c2410_gpio_cfgpin(S3C2410_GPB1, S3C2410_GPB1_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPB1, on); ++} ++ ++static void n30_lcd_power(int on) ++{ ++ /* Turning these off will save about 10mA */ ++ s3c2410_gpio_setpin(S3C2410_GPB8, on); /* CLOCK driver? */ ++ s3c2410_gpio_setpin(S3C2410_GPB9, on); /* VSYNC driver? */ ++ s3c2410_gpio_setpin(S3C2410_GPB10, on); /* HSYYNC driver? */ ++} ++ ++#define BRIGHTNESS_MAX 28 ++#define BRIGHTNESS_OFFSET 5 ++ ++static void n30_set_brightness(int level) ++{ ++ unsigned long tcmpb0; ++ unsigned long tcon; ++ ++ if (level < 0) ++ level = 0; ++ ++ if (level > BRIGHTNESS_MAX) ++ level = BRIGHTNESS_MAX; ++ ++ tcmpb0 = level ? level + BRIGHTNESS_OFFSET : 0; ++ ++ printk("brightness level %d, tcmpb0 %lu\n", level, tcmpb0); ++ ++ /* configure power on/off */ ++ n30_backlight_power(level ? 1 : 0); ++ ++ writel(34, S3C2410_TCNTB(0)); ++ ++ tcon = readl(S3C2410_TCON); ++ tcon &= ~0x0F; ++ tcon |= S3C2410_TCON_T0RELOAD; ++ tcon |= S3C2410_TCON_T0MANUALUPD; ++ ++ writel(tcon, S3C2410_TCON); ++ writel(0x22, S3C2410_TCNTB(0)); ++ writel(tcmpb0, S3C2410_TCMPB(0)); ++ ++ /* start the timer running */ ++ tcon |= S3C2410_TCON_T0START; ++ tcon &= ~S3C2410_TCON_T0MANUALUPD; ++ writel(tcon, S3C2410_TCON); ++} ++ ++static struct s3c2410_bl_mach_info n30_blcfg __initdata = { ++ .backlight_max = BRIGHTNESS_MAX, ++ .backlight_default = BRIGHTNESS_MAX / 2, ++ .backlight_power = n30_backlight_power, ++ .set_brightness = n30_set_brightness, ++ .lcd_power = n30_lcd_power ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, ++ &s3c_device_bl, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, +@@ -160,6 +224,7 @@ static void __init n30_init_irq(void) + static void __init n30_init(void) + { + s3c24xx_fb_set_platdata(&n30_lcdcfg); ++ set_s3c2410bl_info(&n30_blcfg); + + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + diff --git a/packages/linux/linux/acern30/n30-batt.patch b/packages/linux/linux/acern30/n30-batt.patch new file mode 100644 index 0000000000..e5eb9e7812 --- /dev/null +++ b/packages/linux/linux/acern30/n30-batt.patch @@ -0,0 +1,242 @@ +A battery controller i2c driver for the n30. + +I don't use this driver any more, it was much nicer to use the ARM APM +emulation to expose this data. + +Index: linux-2.6.14/drivers/hwmon/Kconfig +=================================================================== +--- linux-2.6.14.orig/drivers/hwmon/Kconfig ++++ linux-2.6.14/drivers/hwmon/Kconfig +@@ -290,6 +290,16 @@ + This driver can also be built as a module. If so, the module + will be called max1619. + ++config SENSORS_N30_BATT ++ tristate "Acer N30 Battery Controller" ++ depends on HWMON && I2C && MACH_N30 ++ help ++ If you say yes here you get support for the battery controller ++ found inside the Acer N30 PDA. ++ ++ This driver can also be built as a module. If so, the module ++ will be called n30_batt. ++ + config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on HWMON && I2C && EXPERIMENTAL +Index: linux-2.6.14/drivers/hwmon/Makefile +=================================================================== +--- linux-2.6.14.orig/drivers/hwmon/Makefile ++++ linux-2.6.14/drivers/hwmon/Makefile +@@ -35,6 +35,7 @@ + obj-$(CONFIG_SENSORS_LM90) += lm90.o + obj-$(CONFIG_SENSORS_LM92) += lm92.o + obj-$(CONFIG_SENSORS_MAX1619) += max1619.o ++obj-$(CONFIG_SENSORS_N30_BATT) += n30_batt.o + obj-$(CONFIG_SENSORS_PC87360) += pc87360.o + obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o + obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o +Index: linux-2.6.14/drivers/hwmon/n30_batt.c +=================================================================== +--- linux-2.6.14.orig/drivers/hwmon/n30_batt.c ++++ linux-2.6.14/drivers/hwmon/n30_batt.c +@@ -0,0 +1,199 @@ ++/* ++ * n30_batt.c - Support for the Acer N30 Battery Controller ++ * Copyright (c) 2005 Christer Weinigel <christer@weinigel.se> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++*/ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/slab.h> ++#include <linux/i2c.h> ++#include <linux/hwmon.h> ++#include <asm/mach-types.h> ++#include <asm/apm.h> ++ ++static unsigned short normal_i2c[] = { I2C_CLIENT_END, I2C_CLIENT_END }; ++static unsigned short probe[] = { I2C_CLIENT_END, I2C_CLIENT_END }; ++static unsigned short ignore[] = { I2C_CLIENT_END, I2C_CLIENT_END }; ++static unsigned short force[] = { -1, 0x0b, I2C_CLIENT_END, I2C_CLIENT_END }; ++static unsigned short *forces[] = { force, NULL }; ++ ++static struct i2c_client_address_data addr_data = { ++ .normal_i2c = normal_i2c, ++ .probe = probe, ++ .ignore = ignore, ++ .forces = forces, ++}; ++ ++struct n30_batt_data { ++ struct i2c_client client; ++ struct semaphore update_lock; ++ unsigned long last_updated; /* last update in jiffies */ ++ u8 charge; ++}; ++ ++static struct n30_batt_data *n30_batt_update_device(struct device *dev) ++{ ++ struct i2c_client *client = to_i2c_client(dev); ++ struct n30_batt_data *data = i2c_get_clientdata(client); ++ ++ down(&data->update_lock); ++ ++ if (time_after(jiffies, data->last_updated + 3 * HZ)) { ++ int value; ++ ++ value = i2c_smbus_read_byte(client); ++ ++ if (value == -1) ++ printk(KERN_WARNING "n30-batt: unable to read charge\n"); ++ else ++ data->charge = value; ++ data->last_updated = jiffies; ++ } ++ ++ up(&data->update_lock); ++ ++ return data; ++} ++ ++static ssize_t show_charge(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct n30_batt_data *data = n30_batt_update_device(dev); ++ return sprintf(buf, "%d\n", data->charge); ++} ++ ++static DEVICE_ATTR(charge, S_IRUGO, show_charge, NULL); ++ ++static struct i2c_driver n30_batt_driver; ++ ++static struct device *n30_batt_dev; ++ ++static int n30_batt_detect(struct i2c_adapter *adapter, int address, int kind) ++{ ++ struct i2c_client *new_client; ++ struct n30_batt_data *data; ++ int err = 0; ++ int value; ++ ++ printk(KERN_INFO "detect n30 Battery controller\n"); ++ ++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) ++ goto exit; ++ ++ printk(KERN_INFO "kmalloc n30 Battery controller\n"); ++ ++ if (!(data = kmalloc(sizeof(struct n30_batt_data), GFP_KERNEL))) { ++ err = -ENOMEM; ++ goto exit; ++ } ++ memset(data, 0, sizeof(struct n30_batt_data)); ++ ++ new_client = &data->client; ++ i2c_set_clientdata(new_client, data); ++ new_client->addr = address; ++ new_client->adapter = adapter; ++ new_client->driver = &n30_batt_driver; ++ new_client->flags = 0; ++ strlcpy(new_client->name, "n30_batt", I2C_NAME_SIZE); ++ ++ if ((value = i2c_smbus_read_byte(new_client)) == -1) { ++ printk(KERN_ERR "n30_batt: unable to read charge value\n"); ++ err = -ENXIO; ++ goto exit_free; ++ } ++ ++ init_MUTEX(&data->update_lock); ++ data->charge = value; ++ data->last_updated = jiffies; ++ ++ printk(KERN_DEBUG "n30_batt: battery charge is %d%%\n", data->charge); ++ ++ if ((err = i2c_attach_client(new_client))) ++ goto exit_free; ++ ++ device_create_file(&new_client->dev, &dev_attr_charge); ++ ++ n30_batt_dev = &new_client->dev; ++ ++ return 0; ++ ++exit_free: ++ kfree(data); ++exit: ++ return err; ++} ++ ++static int n30_batt_attach_adapter(struct i2c_adapter *adapter) ++{ ++ printk(KERN_INFO "attaching n30 Battery controller\n"); ++ return i2c_probe(adapter, &addr_data, n30_batt_detect); ++} ++ ++static int n30_batt_detach_client(struct i2c_client *client) ++{ ++ n30_batt_dev = NULL; ++ i2c_detach_client(client); ++ kfree(i2c_get_clientdata(client)); ++ return 0; ++} ++ ++static struct i2c_driver n30_batt_driver = { ++ .owner = THIS_MODULE, ++ .name = "n30_batt", ++ .flags = I2C_DF_NOTIFY, ++ .attach_adapter = n30_batt_attach_adapter, ++ .detach_client = n30_batt_detach_client, ++}; ++ ++static void n30_get_power_status(struct apm_power_info *info) ++{ ++ if (n30_batt_dev) { ++ struct n30_batt_data *data = n30_batt_update_device(n30_batt_dev); ++ ++ info->ac_line_status = 0xff; ++ info->battery_status = 0xff; ++ info->battery_flag = 0xff; ++ info->battery_life = data->charge; ++ info->time = -1; ++ info->units = -1; ++ } ++} ++ ++static int __init sensors_n30_batt_init(void) ++{ ++ printk(KERN_INFO "n30 Battery controller\n"); ++ ++ if (!machine_is_n30()) ++ return -ENODEV; ++ printk(KERN_INFO "adding n30 Battery controller\n"); ++ ++ apm_get_power_status = n30_get_power_status; ++ ++ return i2c_add_driver(&n30_batt_driver); ++} ++ ++static void __exit sensors_n30_batt_exit(void) ++{ ++ i2c_del_driver(&n30_batt_driver); ++} ++ ++MODULE_AUTHOR("Christer Weinigel <christer@weinigel.se>"); ++MODULE_DESCRIPTION("Acer n30 Battery Controller"); ++MODULE_LICENSE("GPL"); ++ ++module_init(sensors_n30_batt_init); ++module_exit(sensors_n30_batt_exit); diff --git a/packages/linux/linux/acern30/n30-buttons.patch b/packages/linux/linux/acern30/n30-buttons.patch new file mode 100644 index 0000000000..ff1214e698 --- /dev/null +++ b/packages/linux/linux/acern30/n30-buttons.patch @@ -0,0 +1,100 @@ +Add support for the buttons on the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -46,10 +46,12 @@ + #include <asm/arch/regs-gpio.h> + #include <asm/arch/regs-lcd.h> + #include <asm/arch/regs-timer.h> ++#include <asm/arch/irqs.h> + #include <asm/arch/iic.h> + #include <asm/arch/fb.h> + #include <asm/arch/lcd.h> + #include <asm/arch/ts.h> ++#include <asm/arch/buttons.h> + + #include <linux/serial_core.h> + +@@ -194,11 +196,68 @@ static struct s3c2410_ts_mach_info n30_t + .oversampling_shift = 6, + }; + ++static struct s3c2410_button n30_buttons[] = { ++ { IRQ_EINT0, S3C2410_GPF0, S3C2410_GPF0_EINT0, KEY_POWER, ++ "Power", 0 }, ++ ++ { IRQ_EINT17, S3C2410_GPG9, S3C2410_GPG9_EINT17, KEY_UP, ++ "Up_arrow", 0 }, ++ { IRQ_EINT16, S3C2410_GPG8, S3C2410_GPG8_EINT16, KEY_DOWN, ++ "Down_arrow", 0 }, ++ { IRQ_EINT15, S3C2410_GPG7, S3C2410_GPG7_EINT15, KEY_ENTER, ++ "Select", 0 }, ++ ++ { IRQ_EINT7, S3C2410_GPF7, S3C2410_GPF7_EINT7, KEY_HOMEPAGE, ++ "Home", 0 }, ++ { IRQ_EINT6, S3C2410_GPF6, S3C2410_GPF6_EINT6, KEY_CALENDAR, ++ "Calendar", 0 }, ++ { IRQ_EINT5, S3C2410_GPF5, S3C2410_GPF5_EINT5, KEY_COFFEE, ++ "Contacts", 0 }, /* TODO: find a better key :P */ ++ { IRQ_EINT4, S3C2410_GPF4, S3C2410_GPF4_EINT4, KEY_MAIL, ++ "Mail", 0 }, ++}; ++ ++static struct s3c2410_butt_mach_info n30_buttons_cfg __initdata = { ++ .buttons = n30_buttons, ++ .size = ARRAY_SIZE(n30_buttons), ++}; ++ ++static struct s3c2410_button n35_buttons[] = { ++ { IRQ_EINT0, S3C2410_GPF0, S3C2410_GPF0_EINT0, KEY_POWER, ++ "Power", 0 }, ++ ++ { IRQ_EINT13, S3C2410_GPG5, S3C2410_GPG5_EINT13, KEY_LEFT, ++ "Left_arrow", 0 }, ++ { IRQ_EINT14, S3C2410_GPG6, S3C2410_GPG6_EINT14, KEY_RIGHT, ++ "Right_arrow", 0 }, ++ { IRQ_EINT17, S3C2410_GPG9, S3C2410_GPG9_EINT17, KEY_UP, ++ "Up_arrow", 0 }, ++ { IRQ_EINT16, S3C2410_GPG8, S3C2410_GPG8_EINT16, KEY_DOWN, ++ "Down_arrow", 0 }, ++ { IRQ_EINT15, S3C2410_GPG7, S3C2410_GPG7_EINT15, KEY_ENTER, ++ "Select", 0 }, ++ ++ { IRQ_EINT7, S3C2410_GPF7, S3C2410_GPF7_EINT7, KEY_HOMEPAGE, ++ "Home", 0 }, ++ { IRQ_EINT6, S3C2410_GPF6, S3C2410_GPF6_EINT6, KEY_CALENDAR, ++ "Calendar", 0 }, ++ { IRQ_EINT5, S3C2410_GPF5, S3C2410_GPF5_EINT5, KEY_COFFEE, ++ "Contacts", 0 }, /* TODO: find a better key :P */ ++ { IRQ_EINT4, S3C2410_GPF4, S3C2410_GPF4_EINT4, KEY_MAIL, ++ "Mail", 0 }, ++}; ++ ++static struct s3c2410_butt_mach_info n35_buttons_cfg __initdata = { ++ .buttons = n35_buttons, ++ .size = ARRAY_SIZE(n35_buttons), ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_bl, + &s3c_device_ts, ++ &s3c_device_buttons, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, +@@ -238,6 +297,11 @@ static void __init n30_init(void) + set_s3c2410bl_info(&n30_blcfg); + set_s3c2410ts_info(&n30_ts_cfg); + ++ if (machine_is_n30()) ++ s3c24xx_butt_set_platdata(&n30_buttons_cfg); ++ if (machine_is_n35()) ++ s3c24xx_butt_set_platdata(&n35_buttons_cfg); ++ + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + + /* Turn off suspend on both USB ports, and switch the diff --git a/packages/linux/linux/acern30/n30-cleanup.patch b/packages/linux/linux/acern30/n30-cleanup.patch new file mode 100644 index 0000000000..ea1c966ae9 --- /dev/null +++ b/packages/linux/linux/acern30/n30-cleanup.patch @@ -0,0 +1,30 @@ +Clean up some junk from the official kernel. + +The s3c2410.h include isn't needed. + +The compile-command is something that's only useful for me personally +and doesn't belong in the mainstream kernel. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -39,7 +39,6 @@ + + #include <linux/serial_core.h> + +-#include "s3c2410.h" + #include "clock.h" + #include "devs.h" + #include "cpu.h" +@@ -137,10 +136,3 @@ MACHINE_START(N30, "Acer-N30") + .init_irq = n30_init_irq, + .map_io = n30_map_io, + MACHINE_END +- +-/* +- Local variables: +- compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.." +- c-basic-offset: 8 +- End: +-*/ diff --git a/packages/linux/linux/acern30/n30-hardcode.patch b/packages/linux/linux/acern30/n30-hardcode.patch new file mode 100644 index 0000000000..735e18ca4c --- /dev/null +++ b/packages/linux/linux/acern30/n30-hardcode.patch @@ -0,0 +1,158 @@ +This patch hardcodes a lot of register settings so that I can boot +directly from flash on the n30. + +Is there a nicer way of doing this? + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -349,9 +349,148 @@ static struct s3c24xx_board n30_board __ + .devices_count = ARRAY_SIZE(n30_devices) + }; + ++/* Lots of hardcoded stuff, but it sets up the hardware in a useful ++ * state so that we can boot Linux directly from flash. */ ++static void __init n30_hwinit(void) ++{ ++ /* GPA0-11 special functions -- unknown what they do ++ * GPA12 N30 special function -- unknown what it does ++ * N35/PiN output -- unknown what it does ++ * ++ * A12 is nGCS1 on the N30 and an output on the N35/PiN. I ++ * don't think it does anything useful on the N30, so I ought ++ * to make it an output there too since it always driven to 0 ++ * as far as I can tell. */ ++ if (machine_is_n30()) ++ __raw_writel(0x007fffff, S3C2410_GPACON); ++ if (machine_is_n35()) ++ __raw_writel(0x007fefff, S3C2410_GPACON); ++ __raw_writel(0x00000000, S3C2410_GPADAT); ++ ++ /* GPB0 TOUT0 backlight level ++ * GPB1 output 1=backlight on ++ * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled ++ * GPB3 output USB D+ pull up 0=disabled, 1=enabled ++ * GPB4 N30 output -- unknown function ++ * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled ++ * GPB5 output -- unknown function ++ * GPB6 input -- unknown function ++ * GPB7 output -- unknown function ++ * GPB8 output -- probably LCD driver enable ++ * GPB9 output -- probably LCD VSYNC driver enable ++ * GPB10 output -- probably LCD HSYNC driver enable ++ */ ++ __raw_writel(0x00154556, S3C2410_GPBCON); ++ __raw_writel(0x00000750, S3C2410_GPBDAT); ++ __raw_writel(0x0000007d, S3C2410_GPBUP); ++ ++ /* GPC0 input RS232 DCD/DSR/RI ++ * GPC1 LCD ++ * GPC2 output RS232 DTR? ++ * GPC3 input RS232 DCD/DSR/RI ++ * GPC4 LCD ++ * GPC5 output 0=NAND write enabled, 1=NAND write protect ++ * GPC6 input -- unknown function ++ * GPC7 input charger status 0=charger connected ++ * this input can be triggered by power on the USB device ++ * port too, but will go back to disconnected soon after. ++ * GPC8 N30/N35 output -- unknown function, always driven to 1 ++ * PiN input -- unknown function, always read as 1 ++ * Make it an input with a pull up for all models. ++ * GPC9-15 LCD ++ */ ++ __raw_writel(0xaaa80618, S3C2410_GPCCON); ++ __raw_writel(0x0000014c, S3C2410_GPCDAT); ++ __raw_writel(0x0000fef2, S3C2410_GPCUP); ++ ++ /* GPD0 input -- unknown function ++ * GPD1-D7 LCD ++ * GPD8 N30 output -- unknown function ++ * N35/PiN output 1=GPS LED on ++ * GPD9 output 0=power led blinks red, 1=normal power led function ++ * GPD10 output -- unknown function ++ * GPD11-15 LCD drivers ++ */ ++ __raw_writel(0xaa95aaa4, S3C2410_GPDCON); ++ __raw_writel(0x00000601, S3C2410_GPDDAT); ++ __raw_writel(0x0000fbfe, S3C2410_GPDUP); ++ ++ /* GPE0-4 I2S audio bus ++ * GPE5-10 SD/MMC bus ++ * E11-13 outputs -- unknown function, probably power management ++ * E14-15 I2C bus connected to the battery controller ++ */ ++ __raw_writel(0xa56aaaaa, S3C2410_GPECON); ++ __raw_writel(0x0000efc5, S3C2410_GPEDAT); ++ __raw_writel(0x0000f81f, S3C2410_GPEUP); ++ ++ /* GPF0 input 0=power button pressed ++ * GPF1 input SD/MMC switch 0=card present ++ * GPF2 N30 1=reset button pressed (inverted compared to the rest) ++ * N35/PiN 0=reset button pressed ++ * GPF3 N30/PiN input -- unknown function ++ * N35 input GPS antenna position, 0=antenna closed, 1=open ++ * GPF4 input 0=button 4 pressed ++ * GPF5 input 0=button 3 pressed ++ * GPF6 input 0=button 2 pressed ++ * GPF7 input 0=button 1 pressed ++ */ ++ __raw_writel(0x0000aaaa, S3C2410_GPFCON); ++ __raw_writel(0x00000000, S3C2410_GPFDAT); ++ __raw_writel(0x000000ff, S3C2410_GPFUP); ++ ++ /* GPG0 input RS232 DCD/DSR/RI ++ * GPG1 input 1=USB gadget port has power from a host ++ * GPG2 N30 input -- unknown function ++ * N35/PiN input 0=headphones plugged in, 1=not plugged in ++ * GPG3 N30 output -- unknown function ++ * N35/PiN input with unknown function ++ * GPG4 N30 output 0=MMC enabled, 1=MMC disabled ++ * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled ++ * N35/PiN input joystick right ++ * GPG6 N30 output 0=blue led on, 1=off ++ * N35/PiN input joystick left ++ * GPG7 input 0=thumbwheel pressed ++ * GPG8 input 0=thumbwheel down ++ * GPG9 input 0=thumbwheel up ++ * GPG10 input SD/MMC write protect switch ++ * GPG11 N30 input -- unknown function ++ * N35 output 0=GPS antenna powered, 1=not powered ++ * PiN output -- unknown function ++ * GPG12-15 touch screen functions ++ * ++ * The pullups differ between the models, so enable all ++ * pullups that are enabled on any of the models. ++ */ ++ if (machine_is_n30()) ++ __raw_writel(0xff0a956a, S3C2410_GPGCON); ++ if (machine_is_n35()) ++ __raw_writel(0xff4aa92a, S3C2410_GPGCON); ++ __raw_writel(0x0000e800, S3C2410_GPGDAT); ++ __raw_writel(0x0000f86f, S3C2410_GPGUP); ++ ++ /* GPH0/1/2/3 RS232 serial port ++ * GPH4/5 IrDA serial port ++ * GPH6/7 N30 BlueTooth serial port ++ * N35/PiN GPS receiver ++ * GPH8 input -- unknown function ++ * GPH9 CLKOUT0 HCLK -- unknown use ++ * GPH10 CLKOUT1 FCLK -- unknown use ++ * ++ * The pull ups for H6/H7 are enabled on N30 but not on the ++ * N35/PiN. I suppose is useful for a budget model of the N30 ++ * with no bluetooh. It doesn't hurt to have the pull ups ++ * enable, so leave them enabled for all models. ++ */ ++ __raw_writel(0x0028aaaa, S3C2410_GPHCON); ++ __raw_writel(0x000005ef, S3C2410_GPHDAT); ++ __raw_writel(0x0000063f, S3C2410_GPHUP); ++} ++ + static void __init n30_map_io(void) + { + s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); ++ n30_hwinit(); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); + s3c24xx_set_board(&n30_board); diff --git a/packages/linux/linux/acern30/n30-lcd.patch b/packages/linux/linux/acern30/n30-lcd.patch new file mode 100644 index 0000000000..c56ad5aadc --- /dev/null +++ b/packages/linux/linux/acern30/n30-lcd.patch @@ -0,0 +1,66 @@ +This patch adds the configuration needed for the LCD display on the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -44,7 +44,9 @@ + + #include <asm/arch/regs-serial.h> + #include <asm/arch/regs-gpio.h> ++#include <asm/arch/regs-lcd.h> + #include <asm/arch/iic.h> ++#include <asm/arch/fb.h> + + #include <linux/serial_core.h> + +@@ -85,6 +87,40 @@ static struct s3c2410_uartcfg n30_uartcf + }, + }; + ++static struct s3c2410fb_mach_info n30_lcdcfg __initdata = { ++ .fixed_syncs= 1, ++ .regs={ ++ .lcdcon1= S3C2410_LCDCON1_TFT16BPP | ++ S3C2410_LCDCON1_TFT | ++ S3C2410_LCDCON1_CLKVAL(0x0A), ++ ++ .lcdcon2= S3C2410_LCDCON2_VBPD(1) | ++ S3C2410_LCDCON2_LINEVAL(319) | ++ S3C2410_LCDCON2_VFPD(2) | ++ S3C2410_LCDCON2_VSPW(1), ++ ++ .lcdcon3= S3C2410_LCDCON3_HBPD(39) | ++ S3C2410_LCDCON3_HOZVAL(239) | ++ S3C2410_LCDCON3_HFPD(2), ++ ++ .lcdcon4= S3C2410_LCDCON4_MVAL(13) | ++ S3C2410_LCDCON4_HSPW(39), ++ ++ .lcdcon5= S3C2410_LCDCON5_FRM565 | ++ S3C2410_LCDCON5_INVVLINE | ++ S3C2410_LCDCON5_INVVFRAME | ++ S3C2410_LCDCON5_PWREN | ++ S3C2410_LCDCON5_HWSWP, ++ }, ++ .lpcsel= 0x06, ++ ++ .width= 240, ++ .height= 320, ++ .xres= {240,240,240}, ++ .yres= {320,320,320}, ++ .bpp= {16,16,16}, ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, +@@ -123,6 +159,8 @@ static void __init n30_init_irq(void) + + static void __init n30_init(void) + { ++ s3c24xx_fb_set_platdata(&n30_lcdcfg); ++ + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + + /* Turn off suspend on both USB ports, and switch the diff --git a/packages/linux/linux/acern30/n30-mmc-power.patch b/packages/linux/linux/acern30/n30-mmc-power.patch new file mode 100644 index 0000000000..cacb2fafd6 --- /dev/null +++ b/packages/linux/linux/acern30/n30-mmc-power.patch @@ -0,0 +1,24 @@ +This patch adds power management for the mmc port on the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -261,9 +261,16 @@ static struct s3c2410_butt_mach_info n35 + .size = ARRAY_SIZE(n35_buttons), + }; + ++static void n30_mmc_set_power(unsigned int to) ++{ ++ /* TODO This may not be correct. This needs testing. */ ++ if (machine_is_n30()) ++ s3c2410_gpio_setpin(S3C2410_GPG4, !to); ++} ++ + static struct s3c24xx_mmc_platdata n30_mmc_cfg = { + .gpio_detect = S3C2410_GPF1, +- .set_power = NULL, ++ .set_power = n30_mmc_set_power, + .f_max = 3000000, + .ocr_avail = MMC_VDD_32_33, + }; diff --git a/packages/linux/linux/acern30/n30-mmc-wprotect.patch b/packages/linux/linux/acern30/n30-mmc-wprotect.patch new file mode 100644 index 0000000000..e319432c6c --- /dev/null +++ b/packages/linux/linux/acern30/n30-mmc-wprotect.patch @@ -0,0 +1,54 @@ +This adds support for the write protect switch on the n30. + +It also adds some code to the generic s3c2410sdi driver so that the +write protect switch actually does something. + +But I'm not sure if I want to add support for the write protect switch +since it really protect against anything. Using the switch is +entirely up to software, and saying that the card is write protected +when it really isn't sounds like a bad idea. "Secure" Digital indeed. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -270,6 +270,7 @@ static void n30_mmc_set_power(unsigned i + + static struct s3c24xx_mmc_platdata n30_mmc_cfg = { + .gpio_detect = S3C2410_GPF1, ++ .gpio_wprotect = S3C2410_GPG10, + .set_power = n30_mmc_set_power, + .f_max = 3000000, + .ocr_avail = MMC_VDD_32_33, +Index: linux-2.6.14/drivers/mmc/s3c2410mci.c +=================================================================== +--- linux-2.6.14.orig/drivers/mmc/s3c2410mci.c ++++ linux-2.6.14/drivers/mmc/s3c2410mci.c +@@ -515,6 +515,17 @@ static void s3c2410sdi_set_ios(struct mm + + } + ++static int s3c2410sdi_get_ro(struct mmc_host* mmc) ++{ ++ struct s3c2410sdi_host *host = mmc_priv(mmc); ++ int r; ++ ++ r = s3c2410_gpio_getpin(host->pdata->gpio_wprotect); ++ if (host->pdata->wprotect_polarity) ++ r = !r; ++ return r; ++} ++ + static struct mmc_host_ops s3c2410sdi_ops = { + .request = s3c2410sdi_request, + .set_ios = s3c2410sdi_set_ios, +@@ -643,6 +654,9 @@ static int s3c2410sdi_probe(struct devic + mmc->f_max = clk_get_rate(host->clk) / 2; + mmc->caps = MMC_CAP_4_BIT_DATA; + ++ if (host->pdata->gpio_wprotect) ++ mmc->ops->get_ro = s3c2410sdi_get_ro; ++ + /* HACK: There seems to be a hardware bug in TomTom GO. */ + /*if(mmc->f_max>3000000) mmc->f_max=3000000;*/ + diff --git a/packages/linux/linux/acern30/n30-mmc.patch b/packages/linux/linux/acern30/n30-mmc.patch new file mode 100644 index 0000000000..6fb58f142b --- /dev/null +++ b/packages/linux/linux/acern30/n30-mmc.patch @@ -0,0 +1,53 @@ +This patch adds configuration for the SD/MMC port on the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -32,6 +32,8 @@ + #include <linux/device.h> + #include <linux/kthread.h> + ++#include <linux/mmc/protocol.h> ++ + #include <asm/mach/arch.h> + #include <asm/mach/map.h> + #include <asm/mach/irq.h> +@@ -52,6 +54,7 @@ + #include <asm/arch/lcd.h> + #include <asm/arch/ts.h> + #include <asm/arch/buttons.h> ++#include <asm/arch/mmc.h> + + #include <linux/serial_core.h> + +@@ -258,6 +261,13 @@ static struct s3c2410_butt_mach_info n35 + .size = ARRAY_SIZE(n35_buttons), + }; + ++static struct s3c24xx_mmc_platdata n30_mmc_cfg = { ++ .gpio_detect = S3C2410_GPF1, ++ .set_power = NULL, ++ .f_max = 3000000, ++ .ocr_avail = MMC_VDD_32_33, ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, +@@ -268,6 +278,7 @@ static struct platform_device *n30_devic + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_usbgadget, ++ &s3c_device_sdi, + }; + + static struct s3c2410_platform_i2c n30_i2ccfg = { +@@ -309,6 +320,7 @@ static void __init n30_init(void) + s3c24xx_butt_set_platdata(&n35_buttons_cfg); + + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; ++ s3c_device_sdi.dev.platform_data = &n30_mmc_cfg; + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ diff --git a/packages/linux/linux/acern30/n30-nand-hack.patch b/packages/linux/linux/acern30/n30-nand-hack.patch new file mode 100644 index 0000000000..d606f2b47c --- /dev/null +++ b/packages/linux/linux/acern30/n30-nand-hack.patch @@ -0,0 +1,32 @@ +The flash is locked on the n30 and needs to be unlocked before every +write. It should be possible to do one big unlock operation outside +of the erase and write functions but for some strange reason that +doesn't seem to work any more, so do this ugly workaround for now. + +Index: linux-2.6.14/drivers/mtd/nand/nand_base.c +=================================================================== +--- linux-2.6.14.orig/drivers/mtd/nand/nand_base.c ++++ linux-2.6.14/drivers/mtd/nand/nand_base.c +@@ -866,6 +866,10 @@ static int nand_write_page (struct mtd_i + /* FIXME: Enable cached programming */ + cached = 0; + ++ /* unlock the page */ ++ this->cmdfunc (mtd, 0x23, -1, page); ++ this->cmdfunc (mtd, 0x24, -1, page); ++ + /* Send command to begin auto page programming */ + this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page); + +@@ -2037,6 +2041,11 @@ out: + static void single_erase_cmd (struct mtd_info *mtd, int page) + { + struct nand_chip *this = mtd->priv; ++ ++ /* unlock the page */ ++ this->cmdfunc (mtd, 0x23, -1, page); ++ this->cmdfunc (mtd, 0x24, -1, page); ++ + /* Send commands to erase a block */ + this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); + this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); diff --git a/packages/linux/linux/acern30/n30-nand.patch b/packages/linux/linux/acern30/n30-nand.patch new file mode 100644 index 0000000000..d3ac8c557a --- /dev/null +++ b/packages/linux/linux/acern30/n30-nand.patch @@ -0,0 +1,97 @@ +This patch adds a nand flash configuration for the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -33,6 +33,8 @@ + #include <linux/kthread.h> + + #include <linux/mmc/protocol.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/partitions.h> + + #include <asm/mach/arch.h> + #include <asm/mach/map.h> +@@ -55,6 +57,7 @@ + #include <asm/arch/ts.h> + #include <asm/arch/buttons.h> + #include <asm/arch/mmc.h> ++#include <asm/arch/nand.h> + + #include <linux/serial_core.h> + +@@ -276,6 +279,50 @@ static struct s3c24xx_mmc_platdata n30_m + .ocr_avail = MMC_VDD_32_33, + }; + ++static int chip0_map[] = { 0 }; ++ ++struct mtd_partition n30_default_nand_part[] = { ++ { ++ .name = "Whole flash", ++ .offset = 0, ++ .size = MTDPART_SIZ_FULL, ++ .mask_flags = MTD_WRITEABLE, ++ }, ++ { ++ .name = "Partition Table", ++ .offset = 0x28000, ++ .size = 0x8000, ++ }, ++ { ++ .name = "Kernel", ++ .offset = 0x30000, ++ .size = 0x4d0000, ++ }, ++ { ++ .name = "Root", ++ .offset = 0x500000, ++ .size = MTDPART_SIZ_FULL, ++ }, ++}; ++ ++static struct s3c2410_nand_set n30_nand_sets[] = { ++ { ++ .name = "chip0", ++ .nr_chips = 1, ++ .nr_map = chip0_map, ++ .nr_partitions = ARRAY_SIZE(n30_default_nand_part), ++ .partitions = n30_default_nand_part ++ }, ++}; ++ ++static struct s3c2410_platform_nand n30_nand_info = { ++ .tacls = 80, ++ .twrph0 = 80, ++ .twrph1 = 80, ++ .nr_sets = ARRAY_SIZE(n30_nand_sets), ++ .sets = n30_nand_sets, ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, +@@ -287,6 +334,7 @@ static struct platform_device *n30_devic + &s3c_device_iis, + &s3c_device_usbgadget, + &s3c_device_sdi, ++ &s3c_device_nand, + }; + + static struct s3c2410_platform_i2c n30_i2ccfg = { +@@ -329,6 +377,14 @@ static void __init n30_init(void) + + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + s3c_device_sdi.dev.platform_data = &n30_mmc_cfg; ++ s3c_device_nand.dev.platform_data = &n30_nand_info; ++ ++ /* Clear any locks and write protects on the flash. */ ++ s3c2410_gpio_setpin(S3C2410_GPC5, 1); ++ msleep(1); ++ s3c2410_gpio_setpin(S3C2410_GPC5, 0); ++ msleep(1); ++ s3c2410_gpio_setpin(S3C2410_GPC5, 1); + + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ diff --git a/packages/linux/linux/acern30/n30-pm.patch b/packages/linux/linux/acern30/n30-pm.patch new file mode 100644 index 0000000000..014043b55b --- /dev/null +++ b/packages/linux/linux/acern30/n30-pm.patch @@ -0,0 +1,296 @@ +Add suspend/resume support for the Acer N30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -66,11 +66,46 @@ + #include "clock.h" + #include "devs.h" + #include "cpu.h" ++#include "pm.h" + + static struct map_desc n30_iodesc[] __initdata = { + /* nothing here yet */ + }; + ++/* This code is copied to physical address SDRAM_PA + 0x201000. The ++ * bootloader will jump there on a watchdog reset or when resuming ++ * from suspend to ram. */ ++ ++#define N30_RESUME_VA __va(S3C2410_SDRAM_PA + 0x201000) ++ ++static void __init n30_resume(void) __attribute__((naked)); ++static void __init n30_resume(void) ++{ ++ asm( ++ "mov r1, #0x56000000 \n\t" ++ ++ /* load GSTATUS2 and check for a wake from suspend */ ++ "ldr r0, [r1, #0xb4] \n\t" /* GSTATUS2 */ ++ "ands r0, r0, #2 \n\t" /* OFFRST */ ++ "beq 1f \n\t" ++ ++ /* it is a wake reset, so jump to the resume function ++ * pointed to by GSTATUS3 */ ++ "ldr pc, [r1, #0xb8] \n\t" /* GSTATUS3 */ ++ ++ /* Probably a watchdog reset, so fake a power on reset ++ * by writing PWRST to GSTATUS2 and then jump back to ++ * the bootloader. */ ++ "1: \n\t" ++ "mov r0, #1 \n\t" /* PWRST */ ++ "str r0, [r1, #0xb4] \n\t" /* GSTATUS2 */ ++ "mov pc, #0 \n\t" ++ ++ "n30_resume_end: \n\t" ++ ); ++} ++extern void n30_resume_end; ++ + static struct s3c2410_uartcfg n30_uartcfgs[] = { + /* Normal serial port */ + [0] = { +@@ -483,6 +518,154 @@ static void __init n30_hwinit(void) + __raw_writel(0x0000063f, S3C2410_GPHUP); + } + ++void n30_pm_gpio(void) ++{ ++ if (machine_is_n35()) { ++ /* Prepare for suspend to ram. This is what WinCE ++ * apparently does. I know where some of these pins ++ * are connected and ought to be moved to code related ++ * that hardware, but some stuff is magic so far. */ ++ ++ /* All this is magic. WinCE does this and it brings ++ * the power consumption in sleep mode down. */ ++ ++ /* Drive ADDR0, ADDR16..ADDR23, and ADDR26 low. ++ * ADDR24 and ADDR 25 are still working. ++ * nGCS1..nGCS5 are driven low. ++ * CLE, ALE, nFWE, nFRE, nRSTOUT and nFCW are working. */ ++ __raw_writel(0x007e0600, S3C2410_GPACON); ++ __raw_writel(0x00000000, S3C2410_GPADAT); ++ __raw_writel(0x00015556, S3C2410_GPBCON); ++ __raw_writel(0x00000011, S3C2410_GPBDAT); ++ __raw_writel(0x000007ff, S3C2410_GPBUP); ++ __raw_writel(0xaa950618, S3C2410_GPCCON); ++ __raw_writel(0x0000024c, S3C2410_GPCDAT); ++ __raw_writel(0x0000ffb6, S3C2410_GPCUP); ++ __raw_writel(0xaa95aaa5, S3C2410_GPDCON); ++ __raw_writel(0x00000202, S3C2410_GPDDAT); ++ __raw_writel(0x0000fffd, S3C2410_GPDUP); ++ __raw_writel(0xa56aaaaa, S3C2410_GPECON); ++ __raw_writel(0x0000c7c1, S3C2410_GPEDAT); ++ __raw_writel(0x0000ffff, S3C2410_GPEUP); ++ __raw_writel(0x0000aa22, S3C2410_GPFCON); ++ __raw_writel(0x000000f5, S3C2410_GPFDAT); ++ __raw_writel(0x000000fd, S3C2410_GPFUP); ++ __raw_writel(0xff40010a, S3C2410_GPGCON); ++ __raw_writel(0x0000abf5, S3C2410_GPGDAT); ++ __raw_writel(0x0000fcef, S3C2410_GPGUP); ++ __raw_writel(0x0014aaaa, S3C2410_GPHCON); ++ __raw_writel(0x0000062f, S3C2410_GPHDAT); ++ __raw_writel(0x000007ff, S3C2410_GPHUP); ++ ++ /* Turn GPB6 into an output and drive it low. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPB6_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPB6, 0); ++ ++ /* Turn off the pull up on GPB7. */ ++ s3c2410_gpio_pullup(S3C2410_GPB7, 1); ++ ++ /* Drive GPC8 low */ ++ s3c2410_gpio_cfgpin(S3C2410_GPC8, S3C2410_GPC8_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPC8, 0); ++ s3c2410_gpio_pullup(S3C2410_GPC8, 1); ++ ++ /* Drive GPC9/VD[1] high. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPC9, S3C2410_GPC9_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPC9, 1); ++ ++ /* Drive GPC10/VD[2] low. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPC10, S3C2410_GPC10_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPC10, 0); ++ ++ /* Disable pull up on RS232 DTR? */ ++ s3c2410_gpio_pullup(S3C2410_GPC2, 1); ++ ++ /* Enable pull up on GPC6. */ ++ s3c2410_gpio_pullup(S3C2410_GPC6, 0); ++ ++ /* Turn GPD0 into an output and drive it low. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPD0, S3C2410_GPD0_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPD0, 0); ++ s3c2410_gpio_pullup(S3C2410_GPD0, 1); ++ ++ /* Drive VD[9] high and enable the pull up. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPD1, S3C2410_GPD1_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPD1, 1); ++ s3c2410_gpio_pullup(S3C2410_GPD1, 0); ++ ++ /* Drive DPD10 low. */ ++ s3c2410_gpio_setpin(S3C2410_GPD10, 0); ++ s3c2410_gpio_pullup(S3C2410_GPD10, 1); ++ ++ /* This may do something about the power planes. */ ++ s3c2410_gpio_setpin(S3C2410_GPE11, 0); ++ s3c2410_gpio_setpin(S3C2410_GPE12, 0); ++ s3c2410_gpio_setpin(S3C2410_GPE13, 0); ++ ++ /* Disable pull ups on H8. Don't know why. */ ++ s3c2410_gpio_pullup(S3C2410_GPH8, 1); ++ ++ /* LCD stuff, ought to be moved to n30_lcd_power. ++ * GPB8 is still an output and drives 0. ++ * GPB9 and GPB10 are turned into inputs. ++ * All pull ups are disabled. */ ++ s3c2410_gpio_setpin(S3C2410_GPB8, 0); ++ s3c2410_gpio_pullup(S3C2410_GPB8, 1); ++ s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_INP); ++ s3c2410_gpio_pullup(S3C2410_GPB9, 1); ++ s3c2410_gpio_cfgpin(S3C2410_GPB10, S3C2410_GPB10_INP); ++ s3c2410_gpio_pullup(S3C2410_GPB10, 1); ++ ++ /* Disable IrDA (not done by WinCE). */ ++ s3c2410_gpio_setpin(S3C2410_GPB2, 1); ++ ++ /* Disable the GPS. */ ++ s3c2410_gpio_setpin(S3C2410_GPB4, 1); ++ s3c2410_gpio_setpin(S3C2410_GPG11, 1); ++ ++ /* Turn on flash write protect. */ ++ s3c2410_gpio_setpin(S3C2410_GPC5, 0); ++ ++ /* Disable pull ups on the SD/MMC port. This should ++ * maybe be done after power has been removed from the ++ * SD/MMC port. */ ++ s3c2410_gpio_pullup(S3C2410_GPE5, 1); ++ s3c2410_gpio_pullup(S3C2410_GPE6, 1); ++ s3c2410_gpio_pullup(S3C2410_GPE7, 1); ++ s3c2410_gpio_pullup(S3C2410_GPE8, 1); ++ s3c2410_gpio_pullup(S3C2410_GPE9, 1); ++ s3c2410_gpio_pullup(S3C2410_GPE10, 1); ++ ++ /* Disable MMC? On the N30 this makes a difference, ++ * on the N35, maybe not. */ ++ s3c2410_gpio_setpin(S3C2410_GPG4, 1); ++ ++ /* Enable pull up on SD/MMC switch. */ ++ s3c2410_gpio_pullup(S3C2410_GPF1, 0); ++ ++ /* Disable pull up on thumbwheel. Why not on the ++ * other inputs too? */ ++ s3c2410_gpio_pullup(S3C2410_GPG7, 1); ++ ++ /* Disable pull up on SD write protect switch. */ ++ s3c2410_gpio_pullup(S3C2410_GPG10, 1); ++ ++ /* Disable pull ups on the bluetooth/gps port. */ ++ s3c2410_gpio_pullup(S3C2410_GPH6, 1); ++ s3c2410_gpio_pullup(S3C2410_GPH7, 1); ++ ++ /* Drive CLKOUT0 high while sleeping. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPH9, S3C2410_GPH9_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPH9, 1); ++ ++ /* Drive CLKOUT1 high while sleeping. */ ++ s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPH10_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPH10, 1); ++ ++ s3c2410_capture_regs(); ++ } ++} ++ + static void __init n30_map_io(void) + { + s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); +@@ -569,6 +752,12 @@ static void __init n30_init(void) + s3c_device_sdi.dev.platform_data = &n30_mmc_cfg; + s3c_device_nand.dev.platform_data = &n30_nand_info; + ++ s3c2410_pm_init(); ++ enable_irq_wake(IRQ_EINT0); ++ ++ memcpy_toio(N30_RESUME_VA, (void *)n30_resume, ++ &n30_resume_end - (void *)n30_resume); ++ + /* Clear any locks and write protects on the flash. */ + s3c2410_gpio_setpin(S3C2410_GPC5, 1); + msleep(1); +Index: linux-2.6.14/arch/arm/mach-s3c2410/pm.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/pm.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/pm.c +@@ -565,6 +565,8 @@ static int s3c2410_pm_enter(suspend_stat + s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); + s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + ++ n30_pm_gpio(); ++ + /* set the irq configuration for wake */ + + s3c2410_pm_configure_extint(); +@@ -601,6 +603,8 @@ static int s3c2410_pm_enter(suspend_stat + tmp &= S3C2410_GSTATUS2_OFFRESET; + __raw_writel(tmp, S3C2410_GSTATUS2); + ++ s3c2410_capture_regs(); ++ + /* restore the system state */ + + s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); +Index: linux-2.6.14/arch/arm/mach-s3c2410/sleep.S +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/sleep.S ++++ linux-2.6.14/arch/arm/mach-s3c2410/sleep.S +@@ -80,6 +80,7 @@ ENTRY(s3c2410_cpu_suspend) + + orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command + orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals ++ orr r8, r8, #3 @ turn on data pull ups + orr r9, r9, #S3C2410_CLKCON_POWER @ power down command + + teq pc, #0 @ first as a trial-run to load cache +Index: linux-2.6.14/arch/arm/Makefile +=================================================================== +--- linux-2.6.14.orig/arch/arm/Makefile ++++ linux-2.6.14/arch/arm/Makefile +@@ -99,6 +99,10 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0x + machine-$(CONFIG_ARCH_IMX) := imx + machine-$(CONFIG_ARCH_H720X) := h720x + machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 ++# The Acer N30/N35 needs to put some code at 0xc0201000 to handle ++# the watchdog interrupt and resume from suspend. ++textaddr-$(CONFIG_MACH_N30) := 0xc0208000 ++textaddr-$(CONFIG_MACH_N35) := 0xc0208000 + + ifeq ($(CONFIG_ARCH_EBSA110),y) + # This is what happens if you forget the IOCS16 line. +Index: linux-2.6.14/arch/arm/mm/init.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mm/init.c ++++ linux-2.6.14/arch/arm/mm/init.c +@@ -230,6 +230,9 @@ static __init void reserve_node_zero(pg_ + #endif + if (res_size) + reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size); ++ ++ if (machine_is_n30() || machine_is_n35()) ++ reserve_bootmem_node(pgdat, 0x30201000, PAGE_SIZE); + } + + void __init build_mem_type_table(void); +Index: linux-2.6.14/arch/arm/mach-s3c2410/Makefile.boot +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Makefile.boot ++++ linux-2.6.14/arch/arm/mach-s3c2410/Makefile.boot +@@ -1,3 +1,7 @@ + zreladdr-y := 0x30008000 + params_phys-y := 0x30000100 + ++# The N30/N35 needs 0x30201000 for the bootloader interface. So place ++# the kernel after that. ++zreladdr-$(CONFIG_MACH_N30) := 0x30208000 ++zreladdr-$(CONFIG_MACH_N35) := 0x30208000 diff --git a/packages/linux/linux/acern30/n30-ts.patch b/packages/linux/linux/acern30/n30-ts.patch new file mode 100644 index 0000000000..bc619ed2f3 --- /dev/null +++ b/packages/linux/linux/acern30/n30-ts.patch @@ -0,0 +1,43 @@ +This patch adds the touch screen configuration for the n30. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -49,6 +49,7 @@ + #include <asm/arch/iic.h> + #include <asm/arch/fb.h> + #include <asm/arch/lcd.h> ++#include <asm/arch/ts.h> + + #include <linux/serial_core.h> + +@@ -184,10 +185,20 @@ static struct s3c2410_bl_mach_info n30_b + .lcd_power = n30_lcd_power + }; + ++/* The touch is very noisy on the n30 so sample often and average many ++ * samples before passing them on to userspace. */ ++ ++static struct s3c2410_ts_mach_info n30_ts_cfg __initdata = { ++ .delay = 1800, ++ .presc = 49, ++ .oversampling_shift = 6, ++}; ++ + static struct platform_device *n30_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_lcd, + &s3c_device_bl, ++ &s3c_device_ts, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, +@@ -225,6 +236,7 @@ static void __init n30_init(void) + { + s3c24xx_fb_set_platdata(&n30_lcdcfg); + set_s3c2410bl_info(&n30_blcfg); ++ set_s3c2410ts_info(&n30_ts_cfg); + + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + diff --git a/packages/linux/linux/acern30/n30-usbstart.patch b/packages/linux/linux/acern30/n30-usbstart.patch new file mode 100644 index 0000000000..b7479b50e4 --- /dev/null +++ b/packages/linux/linux/acern30/n30-usbstart.patch @@ -0,0 +1,59 @@ +This patch tries to start the USB gadget in a nice way by +disconnecting and then reconnecting the pull up. + +I ought to use the same callback and configuration as RTP does in +mach-h1940. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -356,7 +356,33 @@ static void __init n30_init_irq(void) + s3c24xx_init_irq(); + } + +-/* GPB3 is the line that controls the pull-up for the USB D+ line */ ++static int n30_usbstart_thread(void *unused) ++{ ++ /* Disable both USB ports */ ++ s3c2410_modify_misccr(S3C2410_MISCCR_USBSUSPND0 | ++ S3C2410_MISCCR_USBSUSPND1, ++ S3C2410_MISCCR_USBSUSPND0 | ++ S3C2410_MISCCR_USBSUSPND1); ++ ++ /* Turn off the D+ pull up for a few second so that the USB ++ * host at the other end will do a rescan of the USB bus. */ ++ s3c2410_gpio_setpin(S3C2410_GPB3, 0); ++ ++ msleep_interruptible(1 * 1000); ++ ++ /* Enable the USB host port if this is a n30 */ ++ if (machine_is_n30()) ++ s3c2410_modify_misccr(S3C2410_MISCCR_USBSUSPND0, 0); ++ ++ /* Turn off suspend on USB device port and switch it to device ++ * mode. */ ++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | ++ S3C2410_MISCCR_USBSUSPND1, 0x0); ++ ++ s3c2410_gpio_setpin(S3C2410_GPB3, 1); ++ ++ return 0; ++} + + static void __init n30_init(void) + { +@@ -380,12 +406,7 @@ static void __init n30_init(void) + msleep(1); + s3c2410_gpio_setpin(S3C2410_GPC5, 1); + +- /* Turn off suspend on both USB ports, and switch the +- * selectable USB port to USB device mode. */ +- +- s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | +- S3C2410_MISCCR_USBSUSPND0 | +- S3C2410_MISCCR_USBSUSPND1, 0x0); ++ kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); + } + + MACHINE_START(N30, "Acer-N30") diff --git a/packages/linux/linux/acern30/n35.patch b/packages/linux/linux/acern30/n35.patch new file mode 100644 index 0000000000..75f1818eee --- /dev/null +++ b/packages/linux/linux/acern30/n35.patch @@ -0,0 +1,80 @@ +Index: linux-2.6.14/arch/arm/tools/mach-types +=================================================================== +--- linux-2.6.14.orig/arch/arm/tools/mach-types ++++ linux-2.6.14/arch/arm/tools/mach-types +@@ -869,3 +869,4 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_ + htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 + tpad MACH_TPAD TPAD 856 + roverp3 MACH_ROVERP3 ROVERP3 857 ++n35 MACH_N35 N35 927 +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -1,5 +1,14 @@ + /* linux/arch/arm/mach-s3c2410/mach-n30.c + * ++ * Machine specific code for the following PDAs: ++ * ++ * Acer N30 ++ * ++ * Acer N35 ++ * Navman PiN 570 ++ * Yakumo AlphaX (untested) ++ * Airis NC05 (untested) ++ * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * +@@ -65,7 +74,8 @@ static struct s3c2410_uartcfg n30_uartcf + .ulcon = 0x43, + .ufcon = 0x51, + }, +- /* The BlueTooth controller is connected to port 2 */ ++ /* On the N30 the bluetooth controller is connected here. ++ * On the N35 and variants the GPS receiver is connected here. */ + [2] = { + .hwport = 2, + .flags = 0, +@@ -136,3 +146,16 @@ MACHINE_START(N30, "Acer-N30") + .init_irq = n30_init_irq, + .map_io = n30_map_io, + MACHINE_END ++ ++MACHINE_START(N35, "Acer-N35") ++ /* Maintainer: Christer Weinigel <christer@weinigel.se> ++ */ ++ .phys_ram = S3C2410_SDRAM_PA, ++ .phys_io = S3C2410_PA_UART, ++ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, ++ .boot_params = S3C2410_SDRAM_PA + 0x100, ++ .timer = &s3c24xx_timer, ++ .init_machine = n30_init, ++ .init_irq = n30_init_irq, ++ .map_io = n30_map_io, ++MACHINE_END +Index: linux-2.6.14/arch/arm/mach-s3c2410/Kconfig +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Kconfig ++++ linux-2.6.14/arch/arm/mach-s3c2410/Kconfig +@@ -39,9 +39,18 @@ config MACH_N30 + bool "Acer N30" + select CPU_S3C2410 + help +- Say Y here if you are using the Acer N30 ++ Say Y here if you want support for the Acer N30 PDA. + +- <http://zoo.weinigel.se/n30>. ++ <http://www.handhelds.org/moin/moin.cgi/AcerN30>. ++ ++config MACH_N35 ++ bool "Acer N35/Navman PiN 570" ++ select CPU_S3C2410 ++ help ++ Say Y here if you want support for the Acer N35 or ++ Navman PiN 570 PDAs. ++ ++ <http://www.handhelds.org/moin/moin.cgi/AcerN30>. + + config ARCH_SMDK2410 + bool "SMDK2410/A9M2410" diff --git a/packages/linux/linux/acern30/regdump.patch b/packages/linux/linux/acern30/regdump.patch new file mode 100644 index 0000000000..9e5ffe370d --- /dev/null +++ b/packages/linux/linux/acern30/regdump.patch @@ -0,0 +1,279 @@ +Add some code to dump most registers. It's a good way to find in what +state the bootloader or Windows has left the device. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/regdump.c +=================================================================== +--- /dev/null ++++ linux-2.6.14/arch/arm/mach-s3c2410/regdump.c +@@ -0,0 +1,261 @@ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/ioport.h> ++ ++#include <asm/hardware.h> ++#include <asm/irq.h> ++#include <asm/io.h> ++ ++#include <asm/arch/map.h> ++#include <asm/arch/regs-adc.h> ++#include <asm/arch/regs-clock.h> ++#include <asm/arch/regs-gpio.h> ++#include <asm/arch/regs-iic.h> ++#include <asm/arch/regs-iis.h> ++#include <asm/arch/regs-irq.h> ++#include <asm/arch/regs-lcd.h> ++#include <asm/arch/regs-mem.h> ++#include <asm/arch/regs-nand.h> ++#include <asm/arch/regs-rtc.h> ++#include <asm/arch/regs-timer.h> ++#include <asm/arch/regs-udc.h> ++#include <asm/arch/regs-watchdog.h> ++ ++#define REGV(reg) { #reg, (reg) } ++#define REGI(va, reg) { #reg, (va) + (reg) } ++ ++static struct reginfo { ++ const char *name; ++ void *va; ++} reginfo[] = { ++ /* ADC */ ++ REGI(S3C24XX_VA_ADC, S3C2410_ADCCON), ++ REGI(S3C24XX_VA_ADC, S3C2410_ADCTSC), ++ REGI(S3C24XX_VA_ADC, S3C2410_ADCDLY), ++ REGI(S3C24XX_VA_ADC, S3C2410_ADCDAT0), ++ REGI(S3C24XX_VA_ADC, S3C2410_ADCDAT1), ++ ++ /* Clocks */ ++ REGV(S3C2410_LOCKTIME), ++ REGV(S3C2410_MPLLCON), ++ REGV(S3C2410_UPLLCON), ++ REGV(S3C2410_CLKCON), ++ REGV(S3C2410_CLKSLOW), ++ REGV(S3C2410_CLKDIVN), ++ ++ /* GPIO */ ++ REGV(S3C2410_GPACON), ++ REGV(S3C2410_GPADAT), ++ REGV(S3C2410_GPBCON), ++ REGV(S3C2410_GPBDAT), ++ REGV(S3C2410_GPBUP), ++ REGV(S3C2410_GPCCON), ++ REGV(S3C2410_GPCDAT), ++ REGV(S3C2410_GPCUP), ++ REGV(S3C2410_GPDCON), ++ REGV(S3C2410_GPDDAT), ++ REGV(S3C2410_GPDUP), ++ REGV(S3C2410_GPECON), ++ REGV(S3C2410_GPEDAT), ++ REGV(S3C2410_GPEUP), ++ REGV(S3C2410_GPFCON), ++ REGV(S3C2410_GPFDAT), ++ REGV(S3C2410_GPFUP), ++ REGV(S3C2410_GPGCON), ++ REGV(S3C2410_GPGDAT), ++ REGV(S3C2410_GPGUP), ++ REGV(S3C2410_GPHCON), ++ REGV(S3C2410_GPHDAT), ++ REGV(S3C2410_GPHUP), ++ REGV(S3C2410_MISCCR), ++ REGV(S3C2410_DCLKCON), ++ REGV(S3C2410_EXTINT0), ++ REGV(S3C2410_EXTINT1), ++ REGV(S3C2410_EXTINT2), ++ REGV(S3C2410_EINFLT0), ++ REGV(S3C2410_EINFLT1), ++ REGV(S3C2410_EINFLT2), ++ REGV(S3C2410_EINFLT3), ++ REGV(S3C2410_GSTATUS0), ++ REGV(S3C2410_GSTATUS1), ++ REGV(S3C2410_GSTATUS2), ++ REGV(S3C2410_GSTATUS3), ++ REGV(S3C2410_GSTATUS4), ++ ++#if 0 ++ /* IIC */ ++ REGI(S3C24XX_VA_IIC, S3C2410_IICCON), ++ REGI(S3C24XX_VA_IIC, S3C2410_IICSTAT), ++ REGI(S3C24XX_VA_IIC, S3C2410_IICADD), ++ REGI(S3C24XX_VA_IIC, S3C2410_IICDS), ++ ++ /* IIS */ ++ REGI(S3C24XX_VA_IIS, S3C2410_IISCON), ++ REGI(S3C24XX_VA_IIS, S3C2410_IISMOD), ++ REGI(S3C24XX_VA_IIS, S3C2410_IISPSR), ++ REGI(S3C24XX_VA_IIS, S3C2410_IISFCON), ++ REGI(S3C24XX_VA_IIS, S3C2410_IISFIFO), ++#endif ++ ++ /* IRQ */ ++ REGV(S3C2410_SRCPND), ++ REGV(S3C2410_INTMOD), ++ REGV(S3C2410_INTMSK), ++ REGV(S3C2410_PRIORITY), ++ REGV(S3C2410_INTPND), ++ REGV(S3C2410_INTOFFSET), ++ REGV(S3C2410_SUBSRCPND), ++ REGV(S3C2410_INTSUBMSK), ++ REGV(S3C2410_EINTMASK), ++ REGV(S3C2410_EINTPEND), ++ ++ /* LCD */ ++ REGV(S3C2410_LCDCON1), ++ REGV(S3C2410_LCDCON2), ++ REGV(S3C2410_LCDCON3), ++ REGV(S3C2410_LCDCON4), ++ REGV(S3C2410_LCDCON5), ++ REGV(S3C2410_LCDSADDR1), ++ REGV(S3C2410_LCDSADDR2), ++ REGV(S3C2410_LCDSADDR3), ++ REGV(S3C2410_REDLUT), ++ REGV(S3C2410_GREENLUT), ++ REGV(S3C2410_BLUELUT), ++ REGV(S3C2410_DITHMODE), ++ REGV(S3C2410_TPAL), ++ REGV(S3C2410_LCDINTPND), ++ REGV(S3C2410_LCDSRCPND), ++ REGV(S3C2410_LCDINTMSK), ++ REGV(S3C2410_LPCSEL), ++ ++ // REGV(S3C2410_TFTPAL(x)), ++ ++#if 0 ++ /* Memory controller */ ++ REGV(S3C2410_BWSCON), ++ REGV(S3C2410_BANKCON0), ++ REGV(S3C2410_BANKCON1), ++ REGV(S3C2410_BANKCON2), ++ REGV(S3C2410_BANKCON3), ++ REGV(S3C2410_BANKCON4), ++ REGV(S3C2410_BANKCON5), ++ REGV(S3C2410_BANKCON6), ++ REGV(S3C2410_BANKCON7), ++ REGV(S3C2410_REFRESH), ++ REGV(S3C2410_BANKSIZE), ++ REGV(S3C2410_MRSRB6), ++ REGV(S3C2410_MRSRB7), ++ ++ /* Nand flash */ ++ REGI(S3C24XX_VA_NAND, S3C2410_NFCONF), ++ REGI(S3C24XX_VA_NAND, S3C2410_NFCMD), ++ REGI(S3C24XX_VA_NAND, S3C2410_NFADDR), ++ REGI(S3C24XX_VA_NAND, S3C2410_NFDATA), ++ REGI(S3C24XX_VA_NAND, S3C2410_NFSTAT), ++ REGI(S3C24XX_VA_NAND, S3C2410_NFECC), ++ ++ /* RTC */ ++ REGV(S3C2410_RTCCON), ++ REGV(S3C2410_TICNT), ++ REGV(S3C2410_RTCALM), ++ REGV(S3C2410_ALMSEC), ++ REGV(S3C2410_ALMMIN), ++ REGV(S3C2410_ALMHOUR), ++ REGV(S3C2410_ALMDATE), ++ REGV(S3C2410_ALMMON), ++ REGV(S3C2410_ALMYEAR), ++ REGV(S3C2410_RTCRST), ++ REGV(S3C2410_RTCSEC), ++ REGV(S3C2410_RTCMIN), ++ REGV(S3C2410_RTCHOUR), ++ REGV(S3C2410_RTCDATE), ++ REGV(S3C2410_RTCDAY), ++ REGV(S3C2410_RTCMON), ++ REGV(S3C2410_RTCYEAR), ++#endif ++ ++ /* Timer */ ++ REGV(S3C2410_TCFG0), ++ REGV(S3C2410_TCFG1), ++ REGV(S3C2410_TCON), ++ ++ /* USB Device */ ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_FUNC_ADDR_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_PWR_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP_INT_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_USB_INT_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP_INT_EN_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_USB_INT_EN_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_FRAME_NUM1_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_FRAME_NUM2_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP0_FIFO_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_FIFO_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_FIFO_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_FIFO_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_FIFO_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_CON), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_UNIT), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_FIFO), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_TTC_L), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_TTC_M), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP1_DMA_TTC_H), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_CON), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_UNIT), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_FIFO), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_TTC_L), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_TTC_M), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP2_DMA_TTC_H), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_CON), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_UNIT), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_FIFO), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_TTC_L), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_TTC_M), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP3_DMA_TTC_H), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_CON), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_UNIT), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_FIFO), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_TTC_L), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_TTC_M), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP4_DMA_TTC_H), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_INDEX_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_MAXP_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_EP0_CSR_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_IN_CSR1_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_IN_CSR2_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_OUT_CSR1_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_OUT_CSR2_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_OUT_FIFO_CNT1_REG), ++ REGI(S3C24XX_VA_USBDEV, S3C2410_UDC_OUT_FIFO_CNT2_REG), ++ ++ /* Watchdog */ ++ REGV(S3C2410_WTCON), ++ REGV(S3C2410_WTDAT), ++ REGV(S3C2410_WTCNT), ++}; ++ ++static u32 regval[ARRAY_SIZE(reginfo)]; ++ ++void s3c2410_capture_regs(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(reginfo); i++) ++ regval[i] = readl(reginfo[i].va); ++} ++ ++void s3c2410_dump_regs(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(reginfo); i++) ++ printk("%-20s = 0x%08x\n", reginfo[i].name, regval[i]); ++} ++ ++/* ++ Local variables: ++ compile-command: "make -k -C ../../../.. linux " ++ c-basic-offset: 8 ++ End: ++*/ +Index: linux-2.6.14/arch/arm/mach-s3c2410/Makefile +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Makefile ++++ linux-2.6.14/arch/arm/mach-s3c2410/Makefile +@@ -44,3 +44,5 @@ obj-$(CONFIG_MACH_OTOM) += mach-otom.o + obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o + + obj-y += gpio-sysfs.o ++obj-y += regdump.o ++ diff --git a/packages/linux/linux/acern30/s3c2410-nand-pm.patch b/packages/linux/linux/acern30/s3c2410-nand-pm.patch new file mode 100644 index 0000000000..b53a2f2760 --- /dev/null +++ b/packages/linux/linux/acern30/s3c2410-nand-pm.patch @@ -0,0 +1,53 @@ +Index: linux-2.6.14/drivers/mtd/nand/s3c2410.c +=================================================================== +--- linux-2.6.14.orig/drivers/mtd/nand/s3c2410.c ++++ linux-2.6.14/drivers/mtd/nand/s3c2410.c +@@ -692,11 +692,39 @@ static int s3c2440_nand_probe(struct dev + return s3c24xx_nand_probe(dev, 1); + } + ++#ifdef CONFIG_PM ++ ++static int s3c2410_nand_suspend(struct device *dev, pm_message_t state) ++{ ++ struct s3c2410_nand_info *info = to_nand_info(dev); ++ ++ clk_disable(info->clk); ++ ++ return 0; ++} ++ ++static int s3c2410_nand_resume(struct device *dev) ++{ ++ struct s3c2410_nand_info *info = to_nand_info(dev); ++ ++ clk_enable(info->clk); ++ msleep(1); ++ ++ return s3c2410_nand_inithw(info, dev); ++} ++ ++#else ++#define s3c2410_nand_suspend NULL ++#define s3c2410_nand_resume NULL ++#endif ++ + static struct device_driver s3c2410_nand_driver = { + .name = "s3c2410-nand", + .bus = &platform_bus_type, + .probe = s3c2410_nand_probe, + .remove = s3c2410_nand_remove, ++ .suspend = s3c2410_nand_suspend, ++ .resume = s3c2410_nand_resume, + }; + + static struct device_driver s3c2440_nand_driver = { +@@ -704,6 +732,8 @@ static struct device_driver s3c2440_nand + .bus = &platform_bus_type, + .probe = s3c2440_nand_probe, + .remove = s3c2410_nand_remove, ++ .suspend = s3c2410_nand_suspend, ++ .resume = s3c2410_nand_resume, + }; + + static int __init s3c2410_nand_init(void) diff --git a/packages/linux/linux/acern30/s3c2410_lcd-pm.c b/packages/linux/linux/acern30/s3c2410_lcd-pm.c new file mode 100644 index 0000000000..304baf385c --- /dev/null +++ b/packages/linux/linux/acern30/s3c2410_lcd-pm.c @@ -0,0 +1,80 @@ +Index: linux-2.6.14/drivers/video/backlight/s3c2410_lcd.c +=================================================================== +--- linux-2.6.14.orig/drivers/video/backlight/s3c2410_lcd.c ++++ linux-2.6.14/drivers/video/backlight/s3c2410_lcd.c +@@ -248,10 +248,75 @@ static int s3c2410bl_remove(struct devic + + } + ++#ifdef CONFIG_PM ++ ++static int s3c2410bl_suspend(struct device *dev, pm_message_t state) ++{ ++ struct s3c2410_bl_mach_info *info = ++ (struct s3c2410_bl_mach_info *)dev->platform_data; ++ ++ if (info) { ++ if (info->backlight_power) ++ info->backlight_power(0); ++ if (info->lcd_power) ++ info->lcd_power(0); ++ } ++ ++ return 0; ++} ++ ++static int s3c2410bl_resume(struct device *dev) ++{ ++ struct s3c2410_bl_mach_info *info = ++ (struct s3c2410_bl_mach_info *)dev->platform_data; ++ ++ if (info) { ++ if (info->lcd_power) { ++ switch(info->lcd_power_value) { ++ case FB_BLANK_NORMAL: ++ case FB_BLANK_POWERDOWN: ++ info->lcd_power(0); ++ break; ++ default: ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_UNBLANK: ++ info->lcd_power(1); ++ break; ++ } ++ } ++ if (info->backlight_power) { ++ switch(info->backlight_power_value) { ++ case FB_BLANK_NORMAL: ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_POWERDOWN: ++ info->backlight_power(0); ++ break; ++ default: ++ case FB_BLANK_UNBLANK: ++ info->backlight_power(1); ++ break; ++ } ++ } ++ if (info->set_brightness) ++ info->set_brightness(info->brightness_value); ++ } ++ ++ return 0; ++} ++ ++#else ++#define s3c2410bl_suspend NULL ++#define s3c2410bl_resume NULL ++#endif ++ + static struct device_driver s3c2410bl_driver = { + .name = "s3c2410-bl", + .bus = &platform_bus_type, + .probe = s3c2410bl_probe, ++ .suspend = s3c2410bl_suspend, ++ .resume = s3c2410bl_resume, + .remove = s3c2410bl_remove, + }; + diff --git a/packages/linux/linux/acern30/s3c2410_ts-pm.patch b/packages/linux/linux/acern30/s3c2410_ts-pm.patch new file mode 100644 index 0000000000..ef89f7042f --- /dev/null +++ b/packages/linux/linux/acern30/s3c2410_ts-pm.patch @@ -0,0 +1,73 @@ +Index: linux-2.6.14/drivers/input/touchscreen/s3c2410_ts.c +=================================================================== +--- linux-2.6.14.orig/drivers/input/touchscreen/s3c2410_ts.c ++++ linux-2.6.14/drivers/input/touchscreen/s3c2410_ts.c +@@ -56,6 +56,8 @@ + /* For ts.dev.id.version */ + #define S3C2410TSVERSION 0x0101 + ++#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) ++ + #define WAIT4INT(x) (((x)<<8) | \ + S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ + S3C2410_ADCTSC_XY_PST(3)) +@@ -321,10 +323,59 @@ static int s3c2410ts_remove(struct devic + return 0; + } + ++#ifdef CONFIG_PM ++ ++static int s3c2410ts_suspend(struct device *dev, pm_message_t state) ++{ ++ writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC); ++ writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM, ++ base_addr+S3C2410_ADCCON); ++ ++ disable_irq(IRQ_ADC); ++ disable_irq(IRQ_TC); ++ ++ clk_disable(adc_clock); ++ ++ return 0; ++} ++ ++static int s3c2410ts_resume(struct device *dev) ++{ ++ struct s3c2410_ts_mach_info *info = ++ (struct s3c2410_ts_mach_info *)dev->platform_data; ++ ++ clk_enable(adc_clock); ++ msleep(1); ++ ++ enable_irq(IRQ_ADC); ++ enable_irq(IRQ_TC); ++ ++ if ((info->presc&0xff) > 0) ++ writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ ++ base_addr+S3C2410_ADCCON); ++ else ++ writel(0,base_addr+S3C2410_ADCCON); ++ ++ /* Initialise registers */ ++ if ((info->delay&0xffff) > 0) ++ writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); ++ ++ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); ++ ++ return 0; ++} ++ ++#else ++#define s3c2410ts_suspend NULL ++#define s3c2410ts_resume NULL ++#endif ++ + static struct device_driver s3c2410ts_driver = { + .name = "s3c2410-ts", + .bus = &platform_bus_type, + .probe = s3c2410ts_probe, ++ .suspend = s3c2410ts_suspend, ++ .resume = s3c2410ts_resume, + .remove = s3c2410ts_remove, + }; + diff --git a/packages/linux/linux/acern30/s3c2410fb-resume.patch b/packages/linux/linux/acern30/s3c2410fb-resume.patch new file mode 100644 index 0000000000..b4727454cf --- /dev/null +++ b/packages/linux/linux/acern30/s3c2410fb-resume.patch @@ -0,0 +1,13 @@ +Index: linux-2.6.14/drivers/video/s3c2410fb.c +=================================================================== +--- linux-2.6.14.orig/drivers/video/s3c2410fb.c ++++ linux-2.6.14/drivers/video/s3c2410fb.c +@@ -569,7 +569,7 @@ int s3c2410fb_init_registers(struct s3c2 + + local_irq_restore(flags); + +- writel(fbi->regs.lcdcon1, S3C2410_LCDCON1); ++ writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID, S3C2410_LCDCON1); + writel(fbi->regs.lcdcon2, S3C2410_LCDCON2); + writel(fbi->regs.lcdcon3, S3C2410_LCDCON3); + writel(fbi->regs.lcdcon4, S3C2410_LCDCON4); diff --git a/packages/linux/linux/acern30/s3c2410mci-pm.patch b/packages/linux/linux/acern30/s3c2410mci-pm.patch new file mode 100644 index 0000000000..33a88713cb --- /dev/null +++ b/packages/linux/linux/acern30/s3c2410mci-pm.patch @@ -0,0 +1,84 @@ +Index: linux-2.6.14/drivers/mmc/s3c2410mci.c +=================================================================== +--- linux-2.6.14.orig/drivers/mmc/s3c2410mci.c ++++ linux-2.6.14/drivers/mmc/s3c2410mci.c +@@ -614,7 +614,8 @@ static int s3c2410sdi_probe(struct devic + goto probe_iounmap; + } + +- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_EINT5); ++ // This should be parametrised ++ // s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_EINT5); + set_irq_type(host->irq_cd, IRQT_BOTHEDGE); + + if(request_irq(host->irq_cd, s3c2410sdi_irq_cd, 0, DRIVER_NAME, host)) { +@@ -732,12 +733,57 @@ static int s3c2410sdi_remove(struct devi + return 0; + } + ++#ifdef CONFIG_PM ++static int s3c2410mci_suspend(struct device *dev, pm_message_t state) ++{ ++ struct mmc_host *mmc = dev_get_drvdata(dev); ++ int ret = 0; ++ ++ if (mmc) { ++ struct s3c2410sdi_host *host = mmc_priv(mmc); ++ ++ ret = mmc_suspend_host(mmc, state); ++ ++ clk_disable(host->clk); ++ ++ disable_irq(host->irq_cd); ++ disable_irq(host->irq); ++ } ++ ++ return ret; ++} ++ ++static int s3c2410mci_resume(struct device *dev) ++{ ++ struct mmc_host *mmc = dev_get_drvdata(dev); ++ int ret = 0; ++ ++ if (mmc) { ++ struct s3c2410sdi_host *host = mmc_priv(mmc); ++ ++ enable_irq(host->irq_cd); ++ enable_irq(host->irq); ++ ++ clk_enable(host->clk); ++ ++ ret = mmc_resume_host(mmc); ++ } ++ ++ return ret; ++} ++#else ++#define s3c2410mci_suspend NULL ++#define s3c2410mci_resume NULL ++#endif ++ + static struct device_driver s3c2410sdi_driver = + { + .name = "s3c2410-sdi", + .bus = &platform_bus_type, + .probe = s3c2410sdi_probe, + .remove = s3c2410sdi_remove, ++ .suspend = s3c2410mci_suspend, ++ .resume = s3c2410mci_resume, + }; + + static int __init s3c2410sdi_init(void) +Index: linux-2.6.14/drivers/mmc/mmc.c +=================================================================== +--- linux-2.6.14.orig/drivers/mmc/mmc.c ++++ linux-2.6.14/drivers/mmc/mmc.c +@@ -1263,6 +1263,7 @@ EXPORT_SYMBOL(mmc_suspend_host); + */ + int mmc_resume_host(struct mmc_host *host) + { ++ mmc_power_up(host); + mmc_detect_change(host, 0); + + return 0; diff --git a/packages/linux/linux/acern30/series b/packages/linux/linux/acern30/series new file mode 100644 index 0000000000..16b58a1144 --- /dev/null +++ b/packages/linux/linux/acern30/series @@ -0,0 +1,27 @@ +v2.6.14-gitcurrent.patch +v2.6.14-full.patch +n30-cleanup.patch +n35.patch +n30-lcd.patch +n30-backlight.patch +n30-ts.patch +n30-buttons.patch +n30-mmc.patch +n30-mmc-power.patch +n30-mmc-wprotect.patch +n30-nand.patch +n30-usbstart.patch +n30-hardcode.patch +n30-apm.patch +s3c2410fb-resume.patch +s3c2410_ts-pm.patch +s3c2410_lcd-pm.c +s3c2410mci-pm.patch +s3c2410-nand-pm.patch +n30-nand-hack.patch +mmc-plus.patch +gpio-sysfs.patch +regdump.patch +n30-pm.patch +spi.patch +wingel-hacking.patch diff --git a/packages/linux/linux/acern30/spi.patch b/packages/linux/linux/acern30/spi.patch new file mode 100644 index 0000000000..f835f82d32 --- /dev/null +++ b/packages/linux/linux/acern30/spi.patch @@ -0,0 +1,121 @@ +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -52,6 +52,7 @@ + #include <asm/arch/regs-gpio.h> + #include <asm/arch/regs-lcd.h> + #include <asm/arch/regs-timer.h> ++#include <asm/arch/regs-spi.h> + #include <asm/arch/irqs.h> + #include <asm/arch/iic.h> + #include <asm/arch/fb.h> +@@ -372,6 +373,7 @@ static struct platform_device *n30_devic + &s3c_device_usbgadget, + &s3c_device_sdi, + &s3c_device_nand, ++ &s3c_device_spi1, + }; + + static struct s3c2410_platform_i2c n30_i2ccfg = { +@@ -712,6 +714,90 @@ static int n30_usbstart_thread(void *unu + return 0; + } + ++static int spi_thread(void *regs) ++{ ++ unsigned sptdat1 = ~0, sprdat1 = ~0, spsta1 = ~0; ++ unsigned value; ++ ++ writel(0x01, regs + S3C2410_SPCON); ++ writel(0x02, regs + S3C2410_SPPIN); ++ ++ s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); ++ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); ++ ++ s3c2410_gpio_cfgpin(S3C2410_GPG3, 0x3 << 6); ++ ++ printk("GPGCON=0x%x\n", readl(S3C2410_GPGCON)); ++ ++ msleep(10); ++ ++ while (1) { ++ value = readl(regs + S3C2410_SPTDAT); ++ if (sptdat1 != value) { ++ printk(KERN_INFO "SPTDAT1=0x%x\n", value); ++ sptdat1 = value; ++ } ++ value = readl(regs + S3C2410_SPRDAT); ++ if (sprdat1 != value) { ++ printk(KERN_INFO "SPRDAT1=0x%x\n", value); ++ sprdat1 = value; ++ } ++ value = readl(regs + S3C2410_SPSTA); ++ if (spsta1 != value) { ++ printk(KERN_INFO "SPSTA1=0x%x\n", value); ++ spsta1 = value; ++ } ++ ++ msleep(10); ++ } ++} ++ ++static int s3c24xx_spi_probe(struct device *dev) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct resource *res; ++ int ret; ++ void *regs; ++ struct resource *ioarea; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ dev_err(dev, "cannot find IO resource\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ ioarea = request_mem_region(res->start, (res->end-res->start)+1, ++ pdev->name); ++ if (ioarea == NULL) { ++ dev_err(dev, "cannot request IO\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ regs = ioremap(res->start, (res->end-res->start)+1); ++ if (regs == NULL) { ++ dev_err(dev, "cannot map IO\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ dev_info(dev, "registers %p (%p, %p)\n", regs, ioarea, res); ++ ++ kthread_run(spi_thread, regs, "spi_debug"); ++ ++ ret = 0; ++ ++ out: ++ return ret; ++} ++ ++static struct device_driver s3c24xx_spi_driver = { ++ .name = "s3c2410-spi", ++ .bus = &platform_bus_type, ++ .probe = s3c24xx_spi_probe, ++}; ++ + #ifdef CONFIG_APM + static void n30_get_power_status(struct apm_power_info *info) + { +@@ -764,6 +850,9 @@ static void __init n30_init(void) + memcpy_toio(N30_RESUME_VA, (void *)n30_resume, + &n30_resume_end - (void *)n30_resume); + ++ if (driver_register(&s3c24xx_spi_driver) < 0) ++ printk(KERN_ERR "failed to register spi driver\n"); ++ + /* Clear any locks and write protects on the flash. */ + s3c2410_gpio_setpin(S3C2410_GPC5, 1); + msleep(1); diff --git a/packages/linux/linux/acern30/wingel-hacking.patch b/packages/linux/linux/acern30/wingel-hacking.patch new file mode 100644 index 0000000000..e87de5a460 --- /dev/null +++ b/packages/linux/linux/acern30/wingel-hacking.patch @@ -0,0 +1,1146 @@ +This patch contains some hacks that I'm playing around with right now. + +This isn't anything that should be merged into the official kernel. + +Index: linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/mach-n30.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/mach-n30.c +@@ -22,6 +22,12 @@ + * published by the Free Software Foundation. + */ + ++// #define USBHACK 1 ++#define SPIHACK 1 ++ ++void s3c2410_capture_regs(void); ++void s3c2410_dump_regs(void); ++ + #include <linux/kernel.h> + #include <linux/types.h> + #include <linux/interrupt.h> +@@ -272,14 +278,18 @@ static struct s3c2410_button n35_buttons + + { IRQ_EINT13, S3C2410_GPG5, S3C2410_GPG5_EINT13, KEY_LEFT, + "Left_arrow", 0 }, ++#ifndef SPIHACK + { IRQ_EINT14, S3C2410_GPG6, S3C2410_GPG6_EINT14, KEY_RIGHT, + "Right_arrow", 0 }, ++#endif + { IRQ_EINT17, S3C2410_GPG9, S3C2410_GPG9_EINT17, KEY_UP, + "Up_arrow", 0 }, + { IRQ_EINT16, S3C2410_GPG8, S3C2410_GPG8_EINT16, KEY_DOWN, + "Down_arrow", 0 }, ++#ifndef SPIHACK + { IRQ_EINT15, S3C2410_GPG7, S3C2410_GPG7_EINT15, KEY_ENTER, + "Select", 0 }, ++#endif + + { IRQ_EINT7, S3C2410_GPF7, S3C2410_GPF7_EINT7, KEY_HOMEPAGE, + "Home", 0 }, +@@ -367,7 +377,6 @@ static struct platform_device *n30_devic + &s3c_device_usbgadget, + &s3c_device_sdi, + &s3c_device_nand, +- &s3c_device_spi1, + }; + + static struct s3c2410_platform_i2c n30_i2ccfg = { +@@ -382,6 +391,27 @@ static struct s3c24xx_board n30_board __ + .devices_count = ARRAY_SIZE(n30_devices) + }; + ++static struct platform_device *n35_devices[] __initdata = { ++ &s3c_device_lcd, ++ &s3c_device_bl, ++ &s3c_device_ts, ++ &s3c_device_buttons, ++ &s3c_device_wdt, ++ &s3c_device_i2c, ++ &s3c_device_iis, ++ &s3c_device_usbgadget, ++ &s3c_device_sdi, ++ &s3c_device_nand, ++#ifdef SPIHACK ++ &s3c_device_spi1, ++#endif ++}; ++ ++static struct s3c24xx_board n35_board __initdata = { ++ .devices = n35_devices, ++ .devices_count = ARRAY_SIZE(n35_devices) ++}; ++ + /* Lots of hardcoded stuff, but it sets up the hardware in a useful + * state so that we can boot Linux directly from flash. */ + static void __init n30_hwinit(void) +@@ -674,7 +704,10 @@ static void __init n30_map_io(void) + n30_hwinit(); + s3c24xx_init_clocks(0); + s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); +- s3c24xx_set_board(&n30_board); ++ if (machine_is_n30()) ++ s3c24xx_set_board(&n30_board); ++ if (machine_is_n35()) ++ s3c24xx_set_board(&n35_board); + } + + static void __init n30_init_irq(void) +@@ -710,90 +743,6 @@ static int n30_usbstart_thread(void *unu + return 0; + } + +-static int spi_thread(void *regs) +-{ +- unsigned sptdat1 = ~0, sprdat1 = ~0, spsta1 = ~0; +- unsigned value; +- +- writel(0x01, regs + S3C2410_SPCON); +- writel(0x02, regs + S3C2410_SPPIN); +- +- s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); +- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); +- +- s3c2410_gpio_cfgpin(S3C2410_GPG3, 0x3 << 6); +- +- printk("GPGCON=0x%x\n", readl(S3C2410_GPGCON)); +- +- msleep(10); +- +- while (1) { +- value = readl(regs + S3C2410_SPTDAT); +- if (sptdat1 != value) { +- printk(KERN_INFO "SPTDAT1=0x%x\n", value); +- sptdat1 = value; +- } +- value = readl(regs + S3C2410_SPRDAT); +- if (sprdat1 != value) { +- printk(KERN_INFO "SPRDAT1=0x%x\n", value); +- sprdat1 = value; +- } +- value = readl(regs + S3C2410_SPSTA); +- if (spsta1 != value) { +- printk(KERN_INFO "SPSTA1=0x%x\n", value); +- spsta1 = value; +- } +- +- msleep(10); +- } +-} +- +-static int s3c24xx_spi_probe(struct device *dev) +-{ +- struct platform_device *pdev = to_platform_device(dev); +- struct resource *res; +- int ret; +- void *regs; +- struct resource *ioarea; +- +- res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (res == NULL) { +- dev_err(dev, "cannot find IO resource\n"); +- ret = -ENOENT; +- goto out; +- } +- +- ioarea = request_mem_region(res->start, (res->end-res->start)+1, +- pdev->name); +- if (ioarea == NULL) { +- dev_err(dev, "cannot request IO\n"); +- ret = -ENXIO; +- goto out; +- } +- +- regs = ioremap(res->start, (res->end-res->start)+1); +- if (regs == NULL) { +- dev_err(dev, "cannot map IO\n"); +- ret = -ENXIO; +- goto out; +- } +- +- dev_info(dev, "registers %p (%p, %p)\n", regs, ioarea, res); +- +- kthread_run(spi_thread, regs, "spi_debug"); +- +- ret = 0; +- +- out: +- return ret; +-} +- +-static struct device_driver s3c24xx_spi_driver = { +- .name = "s3c2410-spi", +- .bus = &platform_bus_type, +- .probe = s3c24xx_spi_probe, +-}; +- + #ifdef CONFIG_APM + static void n30_get_power_status(struct apm_power_info *info) + { +@@ -825,6 +774,128 @@ static void n30_get_power_status(struct + } + #endif + ++#define DEBUG_GPIO 1 ++ ++#ifdef DEBUG_GPIO ++static int n30_debug_thread(void *unused) ++{ ++ int i; ++#define PIN(x) { x, #x } ++ static struct pin { ++ unsigned int pin; ++ const char *name; ++ } pins[] = { ++ PIN(S3C2410_GPA12), ++ PIN(S3C2410_GPB2), ++ PIN(S3C2410_GPB4), ++ PIN(S3C2410_GPB5), ++ PIN(S3C2410_GPB6), ++ PIN(S3C2410_GPB7), ++ PIN(S3C2410_GPC0), ++ PIN(S3C2410_GPC3), ++ PIN(S3C2410_GPC6), ++ PIN(S3C2410_GPC7), ++ PIN(S3C2410_GPC8), ++ PIN(S3C2410_GPD0), ++ PIN(S3C2410_GPD8), ++ PIN(S3C2410_GPD9), ++ PIN(S3C2410_GPD10), ++ PIN(S3C2410_GPE11), ++ PIN(S3C2410_GPE12), ++ PIN(S3C2410_GPE13), ++ PIN(S3C2410_GPF0), ++ PIN(S3C2410_GPF1), ++ PIN(S3C2410_GPF2), ++ PIN(S3C2410_GPF3), ++ PIN(S3C2410_GPG0), ++ PIN(S3C2410_GPG1), ++ PIN(S3C2410_GPG2), ++ PIN(S3C2410_GPG3), ++ PIN(S3C2410_GPG4), ++ PIN(S3C2410_GPH8), ++ }; ++#undef PIN ++ enum { PIN_CNT = (sizeof(pins) / sizeof(struct pin)) }; ++ static int values[PIN_CNT]; ++ static int changes[PIN_CNT]; ++ ++ set_current_state(TASK_INTERRUPTIBLE); ++ schedule_timeout(1 * HZ); ++ ++// s3c2410_dump_regs(); ++ ++ printk("AFTER\n"); ++ ++ s3c2410_capture_regs(); ++ ++// s3c2410_dump_regs(); ++ ++ for (i = 0; i < PIN_CNT; i++) ++ values[i] = s3c2410_gpio_getpin(pins[i].pin) ? 1 : 0; ++ ++ printk("MISCCR=0x%08x\n", readl(S3C2410_MISCCR)); ++ ++ while (!kthread_should_stop()) { ++ for (i = 0; i < PIN_CNT; i++) { ++ int value = s3c2410_gpio_getpin(pins[i].pin) ? 1 : 0; ++ ++ if (values[i] != value && changes[i] < 100) { ++ changes[i]++; ++ values[i] = value; ++ printk(KERN_CRIT "%s: %d (%d)\n", pins[i].name, value, changes[i]); ++ } ++ } ++ ++ if (0) { ++ s3c2410_gpio_pullup(S3C2410_GPE15, 1); ++ s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP); ++ s3c2410_gpio_setpin(S3C2410_GPE15, !s3c2410_gpio_getpin(S3C2410_GPE15)); ++ } ++ ++ if (0) ++ s3c2410_gpio_setpin(S3C2410_GPB3, !s3c2410_gpio_getpin(S3C2410_GPB3)); ++ ++ if (1) { ++ static int last_f0; ++ int f0 = s3c2410_gpio_getpin(S3C2410_GPF0); ++ ++ if (last_f0 != f0) { ++ last_f0 = f0; ++ if (!f0) { ++ int r; ++ printk("entering suspend\n"); ++ r = pm_suspend(PM_SUSPEND_MEM); ++ printk("after suspend %d\n", r); ++ } ++ } ++ } ++ ++ ++ if (0) { ++ static int last_f6; ++ int f6 = s3c2410_gpio_getpin(S3C2410_GPF6); ++ ++ if (last_f6 != f6) { ++ last_f6 = f6; ++ if (!f6) { ++ if (s3c2410_gpio_getcfg(S3C2410_GPB6) != S3C2410_GPB6_OUTP) { ++ printk("B6 configured as output"); ++ s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPB6_OUTP); ++ } else { ++ printk("B6 configured as input"); ++ s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPB6_INP); ++ } ++ } ++ } ++ } ++ ++ msleep(10); ++ } ++ ++ return 0; ++} ++#endif ++ + static void __init n30_init(void) + { + s3c24xx_fb_set_platdata(&n30_lcdcfg); +@@ -846,9 +917,6 @@ static void __init n30_init(void) + memcpy_toio(N30_RESUME_VA, (void *)n30_resume, + &n30_resume_end - (void *)n30_resume); + +- if (driver_register(&s3c24xx_spi_driver) < 0) +- printk(KERN_ERR "failed to register spi driver\n"); +- + /* Clear any locks and write protects on the flash. */ + s3c2410_gpio_setpin(S3C2410_GPC5, 1); + msleep(1); +@@ -861,6 +929,8 @@ static void __init n30_init(void) + #ifdef CONFIG_APM + apm_get_power_status = n30_get_power_status; + #endif ++ ++ kthread_run(n30_debug_thread, NULL, "n30_debug"); + } + + MACHINE_START(N30, "Acer-N30") +Index: linux-2.6.14/arch/arm/mach-s3c2410/Makefile +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/Makefile ++++ linux-2.6.14/arch/arm/mach-s3c2410/Makefile +@@ -46,3 +46,5 @@ obj-$(CONFIG_MACH_NEXCODER_2440) += mach + obj-y += gpio-sysfs.o + obj-y += regdump.o + ++obj-m += spi-int.o ++obj-m += spi-dma.o +Index: linux-2.6.14/arch/arm/mach-s3c2410/spi-int.c +=================================================================== +--- /dev/null ++++ linux-2.6.14/arch/arm/mach-s3c2410/spi-int.c +@@ -0,0 +1,261 @@ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/interrupt.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/kthread.h> ++#include <linux/delay.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++#include <asm/hardware/clock.h> ++ ++#include <asm/arch/regs-gpio.h> ++#include <asm/arch/regs-spi.h> ++#include <asm/arch/regs-irq.h> ++ ++struct spi_info { ++ void *regs; ++ struct device *dev; ++ struct clk *clk; ++ struct resource *ioarea; ++ struct resource *irq; ++ struct task_struct *debug_thread; ++}; ++ ++static int spi_debug_thread(void *data) ++{ ++ struct spi_info *info = data; ++ unsigned sptdat1 = ~0, sprdat1 = ~0, spsta1 = ~0; ++ unsigned value; ++ ++ while (!kthread_should_stop()) { ++ if (1) { ++ value = readl(info->regs + S3C2410_SPTDAT); ++ if (sptdat1 != value) { ++ printk(KERN_INFO "SPTDAT1=0x%x\n", value); ++ sptdat1 = value; ++ } ++ value = readl(info->regs + S3C2410_SPRDAT); ++ if (sprdat1 != value) { ++ printk(KERN_INFO "SPRDAT1=0x%x\n", value); ++ sprdat1 = value; ++ } ++ value = readl(info->regs + S3C2410_SPSTA); ++ if (spsta1 != value) { ++ printk("SRCPND=0x%08x\n", readl(S3C2410_SRCPND)); ++ printk("INTMOD=0x%08x\n", readl(S3C2410_INTMOD)); ++ printk("INTMSK=0x%08x\n", readl(S3C2410_INTMSK)); ++ printk("INTPND=0x%08x\n", readl(S3C2410_INTPND)); ++ ++ printk(KERN_INFO "SPSTA1=0x%x\n", value); ++ spsta1 = value; ++ } ++ } ++ if (1) { ++ if (readl(info->regs + S3C2410_SPSTA) & S3C2410_SPSTA_READY) { ++ value = readl(info->regs + S3C2410_SPRDAT); ++ printk("DAT=0x%02x\n", value); ++ writel(1, info->regs + S3C2410_SPTDAT); ++ } ++ } ++ ++ msleep(1); ++ } ++ ++ return 0; ++} ++ ++static irqreturn_t spi_int_irq(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct spi_info *info = dev_id; ++ unsigned long status; ++ ++ status = readl(info->regs + S3C2410_SPSTA); ++ ++ if (status & S3C2410_SPSTA_READY) { ++ printk("INT %02x\n", readb(info->regs + S3C2410_SPRDAT)); ++ writeb(0xff, info->regs + S3C2410_SPTDAT); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static void spi_int_free(struct spi_info *info) ++{ ++ if (!info) ++ return; ++ ++ if (info->debug_thread) ++ kthread_stop(info->debug_thread); ++ if (info->irq) ++ free_irq(info->irq->start, info); ++ if (info->regs) ++ iounmap(info->regs); ++ if (info->ioarea) { ++ release_resource(info->ioarea); ++ kfree(info->ioarea); ++ } ++ if (info->clk) { ++ clk_unuse(info->clk); ++ clk_disable(info->clk); ++ } ++ kfree(info); ++} ++ ++static int spi_int_probe(struct device *dev) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ int ret; ++ struct spi_info *info; ++ struct resource *res; ++ ++ printk("spi_int_probe\n"); ++ ++ info = kmalloc(sizeof(struct spi_info), GFP_KERNEL); ++ if (!info) { ++ dev_err(dev, "failed to allocate info structure\n"); ++ ret = -ENOMEM; ++ goto out; ++ } ++ memset(info, 0, sizeof(*info)); ++ info->dev = dev; ++ ++ dev_info(dev, "got info %p\n", info); ++ ++ info->clk = clk_get(dev, "spi"); ++ if (IS_ERR(info->clk)) { ++ dev_err(dev, "clk_get failed\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ dev_dbg(dev, "clk %p\n", info->clk); ++ ++ clk_use(info->clk); ++ clk_enable(info->clk); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(dev, "unable to find registers\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ dev_info(dev, "got res %p\n", res); ++ ++ info->ioarea = request_mem_region(res->start, ++ (res->end-res->start)+1, ++ pdev->name); ++ if (!info->ioarea) { ++ dev_err(dev, "request_mem_region failed\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ dev_info(dev, "got ioarea %p\n", info->ioarea); ++ ++ info->regs = ioremap(res->start, (res->end-res->start)+1); ++ if (!info->regs) { ++ dev_err(dev, "ioremap failed\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ dev_info(dev, "got regs %p\n", info->regs); ++ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_err(dev, "unable to find irq\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ writel(S3C2410_SPCON_SMOD_INT /* | S3C2410_SPCON_TAGD */, ++ info->regs + S3C2410_SPCON); ++ writel(S3C2410_SPPIN_RESERVED, info->regs + S3C2410_SPPIN); ++ ++ s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1); ++ s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); ++ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); ++ ++ s3c2410_gpio_cfgpin(S3C2410_GPG3, 0x3 << 6); ++ ++ ret = request_irq(res->start, spi_int_irq, 0, pdev->name, info); ++ if (ret) { ++ dev_err(dev, "request_irq failed\n"); ++ goto out; ++ } ++ info->irq = res; ++ ++ dev_info(dev, "got irq %ld\n", info->irq->start); ++ ++ dev_info(dev, "SPI driver active\n"); ++ ++ dev_set_drvdata(dev, info); ++ ret = 0; ++ ++ writeb(0x00, info->regs + S3C2410_SPTDAT); ++ ++ if (0) { ++ info->debug_thread = kthread_run(spi_debug_thread, info, ++ "spi_debug_thread"); ++ } ++ ++ printk("SRCPND=0x%08x\n", readl(S3C2410_SRCPND)); ++ printk("INTMOD=0x%08x\n", readl(S3C2410_INTMOD)); ++ printk("INTMSK=0x%08x\n", readl(S3C2410_INTMSK)); ++ printk("INTPND=0x%08x\n", readl(S3C2410_INTPND)); ++ printk("EINTMASK=0x%08x\n", readl(S3C2410_EINTMASK)); ++ ++ printk("SPCON=0x%08x\n", readl(info->regs + S3C2410_SPCON)); ++ __raw_writel(S3C2410_SPCON_SMOD_INT | S3C2410_SPCON_TAGD, ++ info->regs + S3C2410_SPCON); ++ printk("SPCON=0x%08x\n", readl(info->regs + S3C2410_SPCON)); ++ printk("FOO=0x%08x\n", S3C2410_SPCON_SMOD_INT); ++ ++ out: ++ if (ret) ++ spi_int_free(info); ++ ++ return ret; ++} ++ ++static int spi_int_remove(struct device *dev) ++{ ++ struct spi_info *info = dev_get_drvdata(dev); ++ ++ dev_set_drvdata(dev, NULL); ++ ++ spi_int_free(info); ++ ++ return 0; ++} ++ ++static struct device_driver spi_int_driver = { ++ .name = "s3c2410-spi", ++ .bus = &platform_bus_type, ++ .probe = spi_int_probe, ++ .remove = spi_int_remove, ++}; ++ ++static int __init spi_int_init(void) ++{ ++ printk("SPI interrput driver loaded\n"); ++ ++ return driver_register(&spi_int_driver); ++} ++ ++static void __exit spi_int_exit(void) ++{ ++ driver_unregister(&spi_int_driver); ++} ++ ++module_init(spi_int_init); ++module_exit(spi_int_exit); ++ ++MODULE_DESCRIPTION("S3C2410 interrupt driven SPI driver"); ++MODULE_AUTHOR("Christer Weinigel <christer@weinigel.se>"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.14/arch/arm/mach-s3c2410/devs.c +=================================================================== +--- linux-2.6.14.orig/arch/arm/mach-s3c2410/devs.c ++++ linux-2.6.14/arch/arm/mach-s3c2410/devs.c +@@ -400,11 +400,17 @@ static struct resource s3c_spi0_resource + + }; + ++static u64 s3c_device_spi0_dmamask = 0xffffffffUL; ++ + struct platform_device s3c_device_spi0 = { + .name = "s3c2410-spi", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_spi0_resource), + .resource = s3c_spi0_resource, ++ .dev = { ++ .dma_mask = &s3c_device_spi0_dmamask, ++ .coherent_dma_mask = 0xffffffffUL ++ } + }; + + EXPORT_SYMBOL(s3c_device_spi0); +@@ -425,11 +431,17 @@ static struct resource s3c_spi1_resource + + }; + ++static u64 s3c_device_spi1_dmamask = 0xffffffffUL; ++ + struct platform_device s3c_device_spi1 = { + .name = "s3c2410-spi", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_spi1_resource), + .resource = s3c_spi1_resource, ++ .dev = { ++ .dma_mask = &s3c_device_spi1_dmamask, ++ .coherent_dma_mask = 0xffffffffUL ++ } + }; + + EXPORT_SYMBOL(s3c_device_spi1); +Index: linux-2.6.14/arch/arm/mach-s3c2410/spi-dma.c +=================================================================== +--- /dev/null ++++ linux-2.6.14/arch/arm/mach-s3c2410/spi-dma.c +@@ -0,0 +1,498 @@ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/interrupt.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/kthread.h> ++#include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <linux/spinlock.h> ++ ++#include <asm/uaccess.h> ++#include <asm/dma.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++#include <asm/hardware/clock.h> ++ ++#include <asm/arch/dma.h> ++#include <asm/arch/regs-gpio.h> ++#include <asm/arch/regs-spi.h> ++ ++#define BUFFER_SIZE (1024*1024) ++#define CHUNK_SIZE (64*1024) ++#define NUM_CHUNKS (BUFFER_SIZE / CHUNK_SIZE) ++ ++static char spi_dma_name[] = "s3c2410-spi-dma-reader"; ++ ++static struct s3c2410_dma_client spi_dma_client = { ++ .name = spi_dma_name, ++}; ++ ++struct spi_dma_state { ++ struct spi_dma_info *info; ++ int status; /* 0=inactive, 1=running, <0 = -errno */ ++ unsigned tail; ++}; ++ ++struct spi_chunk { ++ int index; ++ dma_addr_t handle; ++ struct spi_dma_info *info; ++}; ++ ++struct spi_dma_info { ++ void *cpu_addr; ++ dma_addr_t handle; ++ size_t size; ++ ++ spinlock_t head_lock; ++ unsigned head; ++ wait_queue_head_t wait_q; ++ ++ void *regs; ++ ++ struct device *dev; ++ struct clk *clk; ++ struct resource *iomem; ++ int major; ++ dmach_t dmach; ++ int dcon; ++ int flushing; ++ char have_dma; ++ struct spi_chunk chunks[NUM_CHUNKS]; ++}; ++ ++static void spi_queue_dma(struct spi_chunk *chunk) ++{ ++ s3c2410_dma_enqueue(chunk->info->dmach, ++ chunk, chunk->handle, CHUNK_SIZE); ++} ++ ++static void spi_dma_done_callback(s3c2410_dma_chan_t *dma_ch, void *buf_id, ++ int size, s3c2410_dma_buffresult_t result) ++{ ++ struct spi_chunk *chunk = buf_id; ++ struct spi_dma_info *info = chunk->info; ++ ++ if (info->flushing) ++ return; ++ ++ spin_lock(&info->head_lock); ++ if ((info->head / CHUNK_SIZE) % NUM_CHUNKS != chunk->index) ++ dev_warn(info->dev, "out of sync, head=0x%x, index=0x%x\n", ++ info->head, chunk->index); ++ ++ info->head += size; ++ spin_unlock(&info->head_lock); ++ ++ wake_up_interruptible(&info->wait_q); ++ ++ spi_queue_dma(chunk); ++} ++ ++static struct spi_dma_info *global_info; ++ ++static ssize_t spi_dma_read(struct file *file, char __user *buf, ++ size_t len, loff_t *ppos) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ struct spi_dma_state *state = file->private_data; ++ struct spi_dma_info *info = state->info; ++ unsigned head; ++ ssize_t start, end; ++ ssize_t n; ++ ++ if (state->status <= 0) { ++ if (state->status) { ++ state->status = 0; ++ return state->status; ++ } ++ state->tail = info->head; ++ state->status = 1; ++ } ++ ++ add_wait_queue(&info->wait_q, &wait); ++ while (1) { ++ set_current_state(TASK_INTERRUPTIBLE); ++ if ((head = info->head) != state->tail) ++ break; ++ if (signal_pending(current)) ++ break; ++ schedule(); ++ } ++ remove_wait_queue(&info->wait_q, &wait); ++ set_current_state(TASK_RUNNING); ++ ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if ((head - state->tail) > BUFFER_SIZE) ++ return -ENOBUFS; ++ ++ start = state->tail % BUFFER_SIZE; ++ end = head % BUFFER_SIZE; ++ ++ if (end > start) ++ n = end - start; ++ else ++ n = BUFFER_SIZE - start; ++ ++ if (n > len) ++ n = len; ++ ++ if (copy_to_user(buf, info->cpu_addr + start, n)) ++ return -EFAULT; ++ ++ state->tail += n; ++ ++ return n; ++} ++ ++static int spi_dma_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct spi_dma_state *state = file->private_data; ++ struct spi_dma_info *info = state->info; ++ ++ return dma_mmap_coherent(info->dev, vma, ++ info->cpu_addr, info->handle, info->size); ++} ++ ++static int spi_dma_get_pos(struct spi_dma_info *info, unsigned *arg) ++{ ++ if (put_user(info->head, arg)) ++ return -EFAULT; ++ ++ return 0; ++} ++ ++static int spi_dma_wait_pos(struct spi_dma_info *info, unsigned *arg) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ unsigned pos; ++ int diff; ++ ++ if (get_user(pos, arg)) ++ return -EFAULT; ++ ++ add_wait_queue(&info->wait_q, &wait); ++ while (1) { ++ set_current_state(TASK_INTERRUPTIBLE); ++ if ((diff = info->head - pos) > 0) ++ break; ++ if (signal_pending(current)) ++ break; ++ schedule(); ++ } ++ remove_wait_queue(&info->wait_q, &wait); ++ set_current_state(TASK_RUNNING); ++ ++ if (signal_pending(current)) ++ return -EINTR; ++ ++ if (diff > BUFFER_SIZE) ++ return -ENOBUFS; ++ ++ if (put_user(info->head, arg)) ++ return -EFAULT; ++ ++ return 0; ++} ++ ++#define SPI_DMA_IOCTL_BASE ('N' ^ 'M') ++#define SPI_DMA_GET_BUFFER_SIZE _IOR(SPI_DMA_IOCTL_BASE, 0, unsigned) ++#define SPI_DMA_GET_POS _IOR(SPI_DMA_IOCTL_BASE, 1, unsigned) ++#define SPI_DMA_WAIT_POS _IOWR(SPI_DMA_IOCTL_BASE, 2, unsigned) ++ ++static int spi_dma_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ struct spi_dma_state *state = file->private_data; ++ struct spi_dma_info *info = state->info; ++ ++ switch (cmd) { ++ case SPI_DMA_GET_BUFFER_SIZE: ++ if (put_user((unsigned)BUFFER_SIZE, (unsigned *)arg)) ++ return -EFAULT; ++ return 0; ++ ++ case SPI_DMA_GET_POS: ++ return spi_dma_get_pos(info, (unsigned *)arg); ++ ++ case SPI_DMA_WAIT_POS: ++ return spi_dma_wait_pos(info, (unsigned *)arg); ++ ++ default: ++ return -EINVAL; ++ } ++} ++ ++static int spi_dma_open(struct inode *inode, struct file *file) ++{ ++ struct spi_dma_info *info = global_info; ++ struct spi_dma_state *state; ++ int ret; ++ ++ state = kmalloc(sizeof(struct spi_dma_state), GFP_KERNEL); ++ if (!state) ++ return -ENOMEM; ++ state->info = info; ++ state->status = 0; ++ file->private_data = state; ++ ++ ret = nonseekable_open(inode, file); ++ ++ if (ret) ++ kfree(state); ++ ++ return ret; ++} ++ ++static int spi_dma_release(struct inode *inode, struct file *file) ++{ ++ kfree(file->private_data); ++ return 0; ++} ++ ++static struct file_operations spi_dma_fops = { ++ .owner = THIS_MODULE, ++ .read = spi_dma_read, ++ .open = spi_dma_open, ++ .release = spi_dma_release, ++ .mmap = spi_dma_mmap, ++ .ioctl = spi_dma_ioctl, ++}; ++ ++static void spi_dma_free(struct spi_dma_info *info) ++{ ++ if (!info) ++ return; ++ ++ if (info->major) ++ unregister_chrdev(info->major, "s3c2410-spi"); ++ if (info->have_dma) { ++ int value; ++ ++ printk("flush\n"); ++ info->flushing = 1; ++ s3c2410_dma_ctrl(info->dmach, S3C2410_DMAOP_FLUSH); ++ msleep(100); ++ printk("stop\n"); ++ s3c2410_dma_ctrl(info->dmach, S3C2410_DMAOP_STOP); ++ msleep(100); ++ ++ printk("poll\n"); ++ writel(S3C2410_SPCON_SMOD_POLL, info->regs + S3C2410_SPCON); ++ value = readb(info->regs + S3C2410_SPRDAT); ++ printk("%02x\n", value); ++ ++ s3c2410_dma_free(info->dmach, &spi_dma_client); ++ } ++ if (info->regs) ++ iounmap(info->regs); ++ if (info->iomem) { ++ release_resource(info->iomem); ++ kfree(info->iomem); ++ } ++ if (info->clk) { ++ clk_unuse(info->clk); ++ clk_disable(info->clk); ++ } ++ if (info->cpu_addr) { ++ dma_free_coherent(info->dev, ++ info->size, info->cpu_addr, ++ info->handle); ++ ++ } ++ kfree(info); ++} ++ ++static int spi_dma_probe(struct device *dev) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct spi_dma_info *info; ++ struct resource *res; ++ int ret; ++ int i; ++ ++ printk("spi_dma_probe\n"); ++ ++ info = kmalloc(sizeof(struct spi_dma_info), GFP_KERNEL); ++ if (!info) { ++ dev_err(dev, "failed to allocate info structure\n"); ++ ret = -ENOMEM; ++ goto out; ++ } ++ memset(info, 0, sizeof(*info)); ++ info->dev = dev; ++ ++ dev_info(dev, "got info %p\n", info); ++ ++ // TODO figure this out in a better way ++ info->dmach = 3; ++ info->dcon = S3C2410_DCON_CH3_SPI; ++ info->size = BUFFER_SIZE; ++ ++ spin_lock_init(&info->head_lock); ++ init_waitqueue_head(&info->wait_q); ++ ++ info->cpu_addr = dma_alloc_coherent(dev, info->size, &info->handle, GFP_KERNEL); ++ if (!info->cpu_addr) { ++ dev_err(dev, "failed to allocate DMA buffer\n"); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ dev_info(dev, "got DMA buffer at %p, handle 0x%08lx, size %d\n", ++ info->cpu_addr, (long)info->handle, ++ info->size); ++ ++ info->clk = clk_get(dev, "spi"); ++ if (IS_ERR(info->clk)) { ++ dev_err(dev, "clk_get failed\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ dev_dbg(dev, "clk %p\n", info->clk); ++ ++ clk_use(info->clk); ++ clk_enable(info->clk); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(dev, "unable to find registers\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ dev_info(dev, "got iomem %p\n", res); ++ ++ info->iomem = request_mem_region(res->start, ++ (res->end-res->start)+1, ++ pdev->name); ++ if (!info->iomem) { ++ dev_err(dev, "request_mem_region failed\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ dev_info(dev, "got iomem %p\n", info->iomem); ++ ++ dev_info(dev, "res->start=0x%lx, res->end=0x%lx\n", res->start, res->end); ++ dev_info(dev, "iomem->start=0x%lx, iomem->end=0x%lx\n", info->iomem->start, info->iomem->end); ++ ++ info->regs = ioremap(res->start, (res->end-res->start)+1); ++ if (!info->regs) { ++ dev_err(dev, "ioremap failed\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ ++ dev_info(dev, "got regs %p\n", info->regs); ++ ++ if (s3c2410_dma_request(info->dmach, &spi_dma_client, NULL)) { ++ dev_err(dev, "unable to allocate dma channel\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ info->have_dma = 1; ++ ++ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!res) { ++ dev_err(dev, "unable to find irq\n"); ++ ret = -ENOENT; ++ goto out; ++ } ++ ++ ret = register_chrdev(0, "s3c2410-spi", &spi_dma_fops); ++ if (ret < 0) { ++ dev_err(dev, "unable to register character device\n"); ++ goto out; ++ } ++ info->major = ret; ++ global_info = info; ++ ++ dev_info(dev, "SPI driver active\n"); ++ ++ dev_set_drvdata(dev, info); ++ ++ writel(S3C2410_SPCON_SMOD_DMA | S3C2410_SPCON_TAGD, ++ info->regs + S3C2410_SPCON); ++ writel(S3C2410_SPPIN_RESERVED, info->regs + S3C2410_SPPIN); ++ ++ // s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1); ++ s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); ++ s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); ++ ++ s3c2410_gpio_cfgpin(S3C2410_GPG3, 0x3 << 6); ++ ++ s3c2410_dma_devconfig(info->dmach, S3C2410_DMASRC_HW, ++ S3C2410_DISRCC_INC | S3C2410_DISRCC_APB, ++ info->iomem->start + S3C2410_SPRDAT); ++ ++ s3c2410_dma_config(info->dmach, 1, info->dcon); ++ ++ s3c2410_dma_set_buffdone_fn(info->dmach, spi_dma_done_callback); ++ s3c2410_dma_setflags(info->dmach, S3C2410_DMAF_AUTOSTART); ++ ++ writeb(0, info->regs + S3C2410_SPTDAT); ++ msleep(10); ++ ++ for (i = 0; i < NUM_CHUNKS; i++) { ++ int offset = i * CHUNK_SIZE; ++ info->chunks[i].index = i; ++ info->chunks[i].handle = info->handle + offset; ++ info->chunks[i].info = info; ++ } ++ ++ for (i = 0; i < NUM_CHUNKS; i++) { ++ spi_queue_dma(&info->chunks[i]); ++ } ++ ++ ret = 0; ++ ++ out: ++ if (ret) ++ spi_dma_free(info); ++ ++ return ret; ++} ++ ++static int spi_dma_remove(struct device *dev) ++{ ++ struct spi_dma_info *info = dev_get_drvdata(dev); ++ ++ dev_set_drvdata(dev, NULL); ++ ++ spi_dma_free(info); ++ ++ return 0; ++} ++ ++static struct device_driver spi_dma_driver = { ++ .name = "s3c2410-spi", ++ .bus = &platform_bus_type, ++ .probe = spi_dma_probe, ++ .remove = spi_dma_remove, ++}; ++ ++static int __init spi_dma_init(void) ++{ ++ printk("SPI dma driver loaded\n"); ++ ++ return driver_register(&spi_dma_driver); ++} ++ ++static void __exit spi_dma_exit(void) ++{ ++ driver_unregister(&spi_dma_driver); ++} ++ ++module_init(spi_dma_init); ++module_exit(spi_dma_exit); ++ ++MODULE_DESCRIPTION("S3C2410 DMA driven SPI driver"); ++MODULE_AUTHOR("Christer Weinigel <christer@weinigel.se>"); ++MODULE_LICENSE("GPL"); diff --git a/packages/linux/linux_2.6.14.bb b/packages/linux/linux_2.6.14.bb new file mode 100644 index 0000000000..3ddfec809a --- /dev/null +++ b/packages/linux/linux_2.6.14.bb @@ -0,0 +1,51 @@ +DESCRIPTION = "Linux Kernel" +SECTION = "kernel" +LICENSE = "GPL" +PR = "r0" + +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ + file://defconfig" + +SRC_URI_append_progear = " \ + file://progear_bl-r6.patch;patch=1 \ + " +SRC_URI_append_acern30 = "\ + http://lechat.rtp-net.org/ipaq/patches/2.6.14-3/v2.6.14-gitcurrent.patch;patch=1 \ + http://lechat.rtp-net.org/ipaq/patches/2.6.14-3/full.patch;patch=1 \ + file://n30-cleanup.patch;patch=1 \ + file://n35.patch;patch=1 \ + file://n30-lcd.patch;patch=1 \ + file://n30-backlight.patch;patch=1 \ + file://n30-ts.patch;patch=1 \ + file://n30-buttons.patch;patch=1 \ + file://n30-mmc.patch;patch=1 \ + file://n30-mmc-power.patch;patch=1 \ + file://n30-mmc-wprotect.patch;patch=1 \ + file://n30-nand.patch;patch=1 \ + file://n30-usbstart.patch;patch=1 \ + file://n30-hardcode.patch;patch=1 \ + file://n30-apm.patch;patch=1 \ + file://s3c2410fb-resume.patch;patch=1 \ + file://s3c2410_ts-pm.patch;patch=1 \ + file://s3c2410_lcd-pm.c;patch=1 \ + file://s3c2410mci-pm.patch;patch=1 \ + file://s3c2410-nand-pm.patch;patch=1 \ + file://n30-nand-hack.patch;patch=1 \ + file://mmc-plus.patch;patch=1 \ + file://gpio-sysfs.patch;patch=1 \ + file://regdump.patch;patch=1 \ + file://n30-pm.patch;patch=1 \ + file://spi.patch;patch=1 \ + file://wingel-hacking.patch;patch=1 \ + file://gcc4-fixes.patch;patch=1 \ + " + +inherit kernel + +KERNEL_IMAGETYPE = "bzImage" +KERNEL_IMAGETYPE_simpad = "zImage" +KERNEL_IMAGETYPE_acern30 = "zImage" + +do_configure_prepend() { + install -m 0644 ${WORKDIR}/defconfig ${S}/.config +} |