diff options
Diffstat (limited to 'packages')
71 files changed, 5769 insertions, 40 deletions
diff --git a/packages/angstrom/e-wm-config-angstrom.bb b/packages/angstrom/e-wm-config-angstrom.bb index 74110c2c99..a2c6f93657 100644 --- a/packages/angstrom/e-wm-config-angstrom.bb +++ b/packages/angstrom/e-wm-config-angstrom.bb @@ -1,9 +1,10 @@ DESCRIPTION = "Enlightenment DR17 theme for Angstrom" LICENSE = "MIT/BSD" DEPENDS = "edje-native eet-native" +RDEPENDS = "e-wm" RRECOMMENDS_${PN} = "places" -PR = "r3" +PR = "r4" SRC_URI = " \ file://e.src \ diff --git a/packages/binutils/binutils-2.19.1/110-arm-eabi-conf.patch b/packages/binutils/binutils-2.19.1/110-arm-eabi-conf.patch new file mode 100644 index 0000000000..2623301da0 --- /dev/null +++ b/packages/binutils/binutils-2.19.1/110-arm-eabi-conf.patch @@ -0,0 +1,22 @@ +--- /tmp/configure.ac 2008-06-22 14:14:59.000000000 +0200 ++++ binutils-2.18.50.0.7/configure.ac 2008-06-22 14:15:30.000000000 +0200 +@@ -561,7 +561,7 @@ + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + libgloss_dir=arm + ;; +- arm*-*-linux-gnueabi) ++ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) + noconfigdirs="$noconfigdirs target-qthreads" + noconfigdirs="$noconfigdirs target-libobjc" + case ${with_newlib} in +--- /tmp/configure 2008-06-22 14:17:11.000000000 +0200 ++++ binutils-2.18.50.0.7/configure 2008-06-22 14:17:56.000000000 +0200 +@@ -2307,7 +2307,7 @@ + noconfigdirs="$noconfigdirs target-libffi target-qthreads" + libgloss_dir=arm + ;; +- arm*-*-linux-gnueabi) ++ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) + noconfigdirs="$noconfigdirs target-qthreads" + noconfigdirs="$noconfigdirs target-libobjc" + case ${with_newlib} in diff --git a/packages/binutils/binutils-2.19.1/binutils-2.16.1-e300c2c3.patch b/packages/binutils/binutils-2.19.1/binutils-2.16.1-e300c2c3.patch new file mode 100644 index 0000000000..c5e4234f22 --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-2.16.1-e300c2c3.patch @@ -0,0 +1,19 @@ +Adds support for Freescale Power architecture e300c2 and e300c3 cores. +http://www.bitshrine.org/gpp/tc-fsl-x86lnx-e300c3-nptl-4.0.2-2.src.rpm + +Leon Woestenberg <leonw@mailcan.com> + +diff -uNr binutils-2.16.1.orig/gas/config/tc-ppc.c binutils-2.16.1/gas/config/tc-ppc.c +--- binutils-2.16.1.orig/gas/config/tc-ppc.c 2005-03-02 13:24:01.000000000 +0000 ++++ binutils-2.16.1/gas/config/tc-ppc.c 2006-07-04 11:45:24.000000000 +0100 +@@ -879,6 +879,10 @@ + else + ppc_cpu |= PPC_OPCODE_SPE; + } ++ else if (strcmp (arg, "pmr") == 0) ++ { ++ ppc_cpu |= PPC_OPCODE_PMR; ++ } + /* -mppc64 and -m620 mean to assemble for the 64-bit PowerPC + 620. */ + else if (strcmp (arg, "ppc64") == 0 || strcmp (arg, "620") == 0) diff --git a/packages/binutils/binutils-2.19.1/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch b/packages/binutils/binutils-2.19.1/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch new file mode 100644 index 0000000000..8df5b1fea0 --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch @@ -0,0 +1,39 @@ +# strip (and objcopy) fail to set the error code if there is no +# output file name and the rename of the stripped (or copied) file +# fails, yet the command fails to do anything. This fixes both +# objcopy and strip. +# +# modification by bero: Ported to 2.16.91.0.6 +# +#Signed-off-by: John Bowler <jbowler@acm.org> +#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org> +--- +# binutils/objcopy.c | 8 +++++--- +# 1 file changed, 5 insertions(+), 3 deletions(-) +# +Index: src/binutils/objcopy.c +=================================================================== +--- src.orig/binutils/objcopy.c 2007-08-09 13:26:03.000000000 +0100 ++++ src/binutils/objcopy.c 2007-08-09 16:36:12.000000000 +0100 +@@ -2787,8 +2787,9 @@ strip_main (int argc, char *argv[]) + if (preserve_dates) + set_times (tmpname, &statbuf); + if (output_file != tmpname) +- smart_rename (tmpname, output_file ? output_file : argv[i], +- preserve_dates); ++ if (smart_rename (tmpname, output_file ? output_file : argv[i], ++ preserve_dates)) ++ hold_status = 1; + status = hold_status; + } + else +@@ -3411,7 +3412,8 @@ copy_main (int argc, char *argv[]) + if (preserve_dates) + set_times (tmpname, &statbuf); + if (tmpname != output_filename) +- smart_rename (tmpname, input_filename, preserve_dates); ++ if (smart_rename (tmpname, input_filename, preserve_dates)) ++ status = 1; + } + else + unlink_if_ordinary (tmpname); diff --git a/packages/binutils/binutils-2.19.1/binutils-arm-pr7093.patch b/packages/binutils/binutils-2.19.1/binutils-arm-pr7093.patch new file mode 100644 index 0000000000..ad4a556e0f --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-arm-pr7093.patch @@ -0,0 +1,19 @@ +Index: binutils/bfd/elf32-arm.c +=================================================================== +RCS file: /cvs/src/src/bfd/elf32-arm.c,v +retrieving revision 1.162 +retrieving revision 1.163 +diff -u -r1.162 -r1.163 +--- binutils/bfd/elf32-arm.c 23 Dec 2008 09:01:45 -0000 1.162 ++++ binutils/bfd/elf32-arm.c 23 Dec 2008 11:46:17 -0000 1.163 +@@ -4608,6 +4608,10 @@ + Elf_Internal_Shdr *hdr; + unsigned int i, localsyms; + ++ /* PR 7093: Make sure that we are dealing with an arm elf binary. */ ++ if (! is_arm_elf (abfd)) ++ return; ++ + if ((abfd->flags & DYNAMIC) != 0) + return; + diff --git a/packages/binutils/binutils-2.19.1/binutils-uclibc-100-uclibc-conf.patch b/packages/binutils/binutils-2.19.1/binutils-uclibc-100-uclibc-conf.patch new file mode 100644 index 0000000000..8de04e0fe0 --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-uclibc-100-uclibc-conf.patch @@ -0,0 +1,34 @@ +--- binutils-2.18.orig/configure ++++ binutils-2.18/configure +@@ -2206,7 +2206,7 @@ + am33_2.0-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; +- sh-*-linux*) ++ sh*-*-linux*) + noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss" + ;; + sh*-*-pe|mips*-*-pe|*arm-wince-pe) +@@ -2504,7 +2504,7 @@ + romp-*-*) + noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}" + ;; +- sh-*-* | sh64-*-*) ++ sh*-*-* | sh64-*-*) + case "${host}" in + i[3456789]86-*-vsta) ;; # don't add gprof back in + i[3456789]86-*-go32*) ;; # don't add gprof back in +--- binutils-2.18.orig/gprof/configure ++++ binutils-2.18/gprof/configure +@@ -4124,6 +4124,11 @@ + lt_cv_deplibs_check_method=pass_all + ;; + ++linux-uclibc*) ++ lt_cv_deplibs_check_method=pass_all ++ lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so` ++ ;; ++ + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' diff --git a/packages/binutils/binutils-2.19.1/binutils-uclibc-300-001_ld_makefile_patch.patch b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-001_ld_makefile_patch.patch new file mode 100644 index 0000000000..04a7e61e25 --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-001_ld_makefile_patch.patch @@ -0,0 +1,50 @@ +#!/bin/sh -e +## 001_ld_makefile_patch.dpatch +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Description: correct where ld scripts are installed +## DP: Author: Chris Chimelis <chris@debian.org> +## DP: Upstream status: N/A +## DP: Date: ?? + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +--- binutils-2.16.91.0.1/ld/Makefile.am ++++ binutils-2.16.91.0.1/ld/Makefile.am +@@ -20,7 +20,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + + EMUL = @EMUL@ + EMULATION_OFILES = @EMULATION_OFILES@ +--- binutils-2.16.91.0.1/ld/Makefile.in ++++ binutils-2.16.91.0.1/ld/Makefile.in +@@ -268,7 +268,7 @@ + # We put the scripts in the directory $(scriptdir)/ldscripts. + # We can't put the scripts in $(datadir) because the SEARCH_DIR + # directives need to be different for native and cross linkers. +-scriptdir = $(tooldir)/lib ++scriptdir = $(libdir) + BASEDIR = $(srcdir)/.. + BFDDIR = $(BASEDIR)/bfd + INCDIR = $(BASEDIR)/include diff --git a/packages/binutils/binutils-2.19.1/binutils-uclibc-300-006_better_file_error.patch b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-006_better_file_error.patch new file mode 100644 index 0000000000..f337611edf --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-006_better_file_error.patch @@ -0,0 +1,43 @@ +#!/bin/sh -e +## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com> +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Specify which filename is causing an error if the filename is a +## DP: directory. (#45832) + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c +--- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c 2003-07-23 16:08:09.000000000 +0100 ++++ binutils-2.14.90.0.6/bfd/opncls.c 2003-09-10 22:35:00.000000000 +0100 +@@ -150,6 +150,13 @@ + { + bfd *nbfd; + const bfd_target *target_vec; ++ struct stat s; ++ ++ if (stat (filename, &s) == 0) ++ if (S_ISDIR(s.st_mode)) { ++ bfd_set_error (bfd_error_file_not_recognized); ++ return NULL; ++ } + + nbfd = _bfd_new_bfd (); + if (nbfd == NULL) diff --git a/packages/binutils/binutils-2.19.1/binutils-uclibc-300-012_check_ldrunpath_length.patch b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-012_check_ldrunpath_length.patch new file mode 100644 index 0000000000..498651a90c --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-uclibc-300-012_check_ldrunpath_length.patch @@ -0,0 +1,47 @@ +#!/bin/sh -e +## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org> +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for +## DP: cases where -rpath isn't specified. (#151024) + +if [ $# -ne 1 ]; then + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1 +fi + +[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts +patch_opts="${patch_opts:--f --no-backup-if-mismatch}" + +case "$1" in + -patch) patch $patch_opts -p1 < $0;; + -unpatch) patch $patch_opts -p1 -R < $0;; + *) + echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" + exit 1;; +esac + +exit 0 + +@DPATCH@ +diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em +--- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:58.000000000 +0100 ++++ binutils-2.15/ld/emultempl/elf32.em 2004-05-21 23:12:59.000000000 +0100 +@@ -692,6 +692,8 @@ + && command_line.rpath == NULL) + { + lib_path = (const char *) getenv ("LD_RUN_PATH"); ++ if ((lib_path) && (strlen (lib_path) == 0)) ++ lib_path = NULL; + if (gld${EMULATION_NAME}_search_needed (lib_path, &n, + force)) + break; +@@ -871,6 +873,8 @@ + rpath = command_line.rpath; + if (rpath == NULL) + rpath = (const char *) getenv ("LD_RUN_PATH"); ++ if ((rpath) && (strlen (rpath) == 0)) ++ rpath = NULL; + if (! (bfd_elf_size_dynamic_sections + (output_bfd, command_line.soname, rpath, + command_line.filter_shlib, diff --git a/packages/binutils/binutils-2.19.1/binutils-uclibc-gas-needs-libm.patch b/packages/binutils/binutils-2.19.1/binutils-uclibc-gas-needs-libm.patch new file mode 100644 index 0000000000..db838cf20c --- /dev/null +++ b/packages/binutils/binutils-2.19.1/binutils-uclibc-gas-needs-libm.patch @@ -0,0 +1,38 @@ +Source: Khem Raj <raj.khem@gmail.com> +Disposition: submit upstream. + +Description: + +We do not need to have the libtool patch anymore for binutils after +libtool has been updated upstream it include support for it. However +for building gas natively on uclibc systems we have to link it with +-lm so that it picks up missing symbols. + +/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_from_double': +floatformat.c:(.text+0x1ec): undefined reference to `frexp' +floatformat.c:(.text+0x2f8): undefined reference to `ldexp' +/local/build_area/BUILD/arm_v5t_le_uclibc/binutils-2.17.50/objdir/libiberty/pic/libiberty.a(floatformat.o): In function `floatformat_to_double': +floatformat.c:(.text+0x38a): undefined reference to `ldexp' +floatformat.c:(.text+0x3d2): undefined reference to `ldexp' +floatformat.c:(.text+0x43e): undefined reference to `ldexp' floatformat.c:(.text+0x4e2): undefined reference to `ldexp' +collect2: ld returned 1 exit status +make[4]: *** [as-new] Error 1 + +Index: binutils-2.17.50/gas/configure.tgt +=================================================================== +--- binutils-2.17.50.orig/gas/configure.tgt ++++ binutils-2.17.50/gas/configure.tgt +@@ -408,6 +408,12 @@ case ${generic_target} in + *-*-netware) fmt=elf em=netware ;; + esac + ++case ${generic_target} in ++ arm-*-*uclibc*) ++ need_libm=yes ++ ;; ++esac ++ + case ${cpu_type} in + alpha | arm | i386 | ia64 | mips | ns32k | pdp11 | ppc | sparc | z80 | z8k) + bfd_gas=yes + diff --git a/packages/binutils/binutils-cross-sdk_2.19.1.bb b/packages/binutils/binutils-cross-sdk_2.19.1.bb new file mode 100644 index 0000000000..76dff5449f --- /dev/null +++ b/packages/binutils/binutils-cross-sdk_2.19.1.bb @@ -0,0 +1,3 @@ +require binutils_${PV}.bb +require binutils-cross-sdk.inc +PR = "r0" diff --git a/packages/binutils/binutils-cross_2.19.1.bb b/packages/binutils/binutils-cross_2.19.1.bb new file mode 100644 index 0000000000..b78a30ac47 --- /dev/null +++ b/packages/binutils/binutils-cross_2.19.1.bb @@ -0,0 +1,4 @@ +FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}" +require binutils_${PV}.bb +require binutils-cross.inc + diff --git a/packages/binutils/binutils_2.19.1.bb b/packages/binutils/binutils_2.19.1.bb new file mode 100644 index 0000000000..c399ab8c62 --- /dev/null +++ b/packages/binutils/binutils_2.19.1.bb @@ -0,0 +1,19 @@ +PR = "r0" + +require binutils.inc + +SRC_URI = "\ + ${GNU_MIRROR}/binutils/binutils-${PV}.tar.bz2 \ + file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \ + file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \ + file://110-arm-eabi-conf.patch;patch=1 \ + file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \ + file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \ + file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \ + file://binutils-uclibc-gas-needs-libm.patch;patch=1 \ + file://binutils-arm-pr7093.patch;patch=1 \ + " + +# powerpc patches +SRC_URI += "file://binutils-2.16.1-e300c2c3.patch;patch=1" + diff --git a/packages/bluez/bluez4/fix-dfutool-usb-declaration-mismatch.patch b/packages/bluez/bluez4/fix-dfutool-usb-declaration-mismatch.patch new file mode 100644 index 0000000000..b1ee510e8b --- /dev/null +++ b/packages/bluez/bluez4/fix-dfutool-usb-declaration-mismatch.patch @@ -0,0 +1,13 @@ +Index: bluez-4.27/tools/dfutool.c +=================================================================== +--- bluez-4.27.orig/tools/dfutool.c ++++ bluez-4.27/tools/dfutool.c +@@ -59,7 +59,7 @@ + #endif + + #ifdef NEED_USB_GET_BUSSES +-static inline struct usb_bus *usb_get_busses(void) ++inline struct usb_bus *usb_get_busses(void) + { + return usb_busses; + } diff --git a/packages/bluez/bluez4_4.27.bb b/packages/bluez/bluez4_4.27.bb index 10cc4fe723..c9aa79e8ed 100644 --- a/packages/bluez/bluez4_4.27.bb +++ b/packages/bluez/bluez4_4.27.bb @@ -4,10 +4,11 @@ PRIORITY = "optional" DEPENDS = "gst-plugins-base alsa-lib libusb-compat libusb1 dbus-glib" HOMEPAGE = "http://www.bluez.org" LICENSE = "GPL" -PR = "r1" +PR = "r2" SRC_URI = "\ http://www.kernel.org/pub/linux/bluetooth/bluez-${PV}.tar.gz \ + file://fix-dfutool-usb-declaration-mismatch.patch;patch=1 \ file://sbc-thumb.patch;patch=1 \ file://hid2hci_usb_init.patch;patch=1 \ " diff --git a/packages/bonnie/bonnie++.inc b/packages/bonnie/bonnie++.inc index dabe6dc1f7..7e9d81579c 100644 --- a/packages/bonnie/bonnie++.inc +++ b/packages/bonnie/bonnie++.inc @@ -6,7 +6,8 @@ DESCRIPTION="Tests large file IO and creation/deletion of small files." LICENSE="GPL" -SRC_URI="http://www.coker.com.au/bonnie++/${PN}-${PV}.tgz" +SRC_URI="http://www.coker.com.au/bonnie++/${PN}-${PV}.tgz \ + file://gcc-4.3-fixes.patch;patch=1" inherit autotools diff --git a/packages/bonnie/files/gcc-4.3-fixes.patch b/packages/bonnie/files/gcc-4.3-fixes.patch new file mode 100644 index 0000000000..cecf87e05a --- /dev/null +++ b/packages/bonnie/files/gcc-4.3-fixes.patch @@ -0,0 +1,16 @@ +--- + zcav.cpp | 1 + + 1 file changed, 1 insertion(+) + +Index: bonnie++-1.03a/zcav.cpp +=================================================================== +--- bonnie++-1.03a.orig/zcav.cpp ++++ bonnie++-1.03a/zcav.cpp +@@ -15,6 +15,7 @@ using namespace std; + #else + #include <vector.h> + #endif ++#include <string.h> + + // Read the specified number of megabytes of data from the fd and return the + // amount of time elapsed in seconds. diff --git a/packages/busybox/busybox-1.13.2/udhcpc-fix-nfsroot.patch b/packages/busybox/busybox-1.13.2/udhcpc-fix-nfsroot.patch new file mode 100644 index 0000000000..39716ec14b --- /dev/null +++ b/packages/busybox/busybox-1.13.2/udhcpc-fix-nfsroot.patch @@ -0,0 +1,40 @@ +diff -uNr busybox-1.13.2-orig/examples/udhcp/simple.script busybox-1.13.2/examples/udhcp/simple.script +--- busybox-1.13.2-orig/examples/udhcp/simple.script 2009-02-04 11:08:13.000000000 -0500 ++++ busybox-1.13.2/examples/udhcp/simple.script 2009-02-04 11:24:51.000000000 -0500 +@@ -8,22 +8,31 @@ + [ -n "$broadcast" ] && BROADCAST="broadcast $broadcast" + [ -n "$subnet" ] && NETMASK="netmask $subnet" + ++# return 0 if root is mounted on a network filesystem ++root_is_nfs() { ++ grep -qe '^/dev/root.*\(nfs\|smbfs\|ncp\|coda\) .*' /proc/mounts ++} ++ + case "$1" in + deconfig) +- /sbin/ifconfig $interface 0.0.0.0 ++ if ! root_is_nfs ; then ++ /sbin/ifconfig $interface 0.0.0.0 ++ fi + ;; + + renew|bound) + /sbin/ifconfig $interface $ip $BROADCAST $NETMASK + + if [ -n "$router" ] ; then +- while route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do +- : +- done ++ if ! root_is_nfs ; then ++ while route del default gw 0.0.0.0 dev $interface 2>/dev/null ; do ++ : ++ done ++ fi + + metric=0 + for i in $router ; do +- route add default gw $i dev $interface metric $((metric++)) ++ route add default gw $i dev $interface metric $((metric++)) 2>/dev/null + done + fi + diff --git a/packages/busybox/busybox_1.13.2.bb b/packages/busybox/busybox_1.13.2.bb index c8aac79d6d..56f47b37a2 100644 --- a/packages/busybox/busybox_1.13.2.bb +++ b/packages/busybox/busybox_1.13.2.bb @@ -1,11 +1,12 @@ require busybox.inc -PR = "r9" +PR = "r10" SRC_URI = "\ http://www.busybox.net/downloads/busybox-${PV}.tar.gz \ \ file://udhcpscript.patch;patch=1 \ + file://udhcpc-fix-nfsroot.patch;patch=1 \ file://B921600.patch;patch=1 \ file://r24785.patch;patch=1;status=merged \ file://find-touchscreen.sh \ @@ -37,4 +38,3 @@ do_install_append() { install -m 0755 ${WORKDIR}/find-touchscreen.sh ${D}${sysconfdir}/mdev/ install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/ } - diff --git a/packages/ddccontrol/ddccontrol-db_20061014.bb b/packages/ddccontrol/ddccontrol-db_20061014.bb new file mode 100644 index 0000000000..acea818b87 --- /dev/null +++ b/packages/ddccontrol/ddccontrol-db_20061014.bb @@ -0,0 +1,10 @@ +DESCRIPTION = "ddccontrol - softwarewise change monitor settings" +LICENSE = "GPLv2" +HOMEPAGE = "http://sourceforge.net/projects/ddccontrol/" + +PR = "r0" + +inherit autotools + +SRC_URI = "${SOURCEFORGE_MIRROR}/ddccontrol/ddccontrol-db-${PV}.tar.bz2" + diff --git a/packages/ddccontrol/ddccontrol_0.4.2.bb b/packages/ddccontrol/ddccontrol_0.4.2.bb new file mode 100644 index 0000000000..2099ebeb4e --- /dev/null +++ b/packages/ddccontrol/ddccontrol_0.4.2.bb @@ -0,0 +1,13 @@ +DESCRIPTION = "ddccontrol - softwarewise change monitor settings" +LICENSE = "GPLv2" +HOMEPAGE = "http://sourceforge.net/projects/ddccontrol/" + +PR = "r0" + +inherit autotools + +DEPENDS = "pciutils libxml2 gtk+ ddccontrol-db" + +SRC_URI = "${SOURCEFORGE_MIRROR}/ddccontrol/ddccontrol-${PV}.tar.bz2" + +FILES_${PN}+= "${datadir}/icons/Bluecurve/48x48/apps/gddccontrol.png" diff --git a/packages/directfb/directfb-1.2.7/ts_lib_autotools.patch b/packages/directfb/directfb-1.2.7/ts_lib_autotools.patch new file mode 100644 index 0000000000..f19c724a00 --- /dev/null +++ b/packages/directfb/directfb-1.2.7/ts_lib_autotools.patch @@ -0,0 +1,22 @@ +--- + configure.in | 7 +++++-- + 1 file changed, 5 insertions(+), 2 deletions(-) + +Index: DirectFB-1.2.7/configure.in +=================================================================== +--- DirectFB-1.2.7.orig/configure.in ++++ DirectFB-1.2.7/configure.in +@@ -1288,8 +1288,11 @@ fi + + enable_tslib=no + if test "$checkfor_tslib" = "yes"; then +- PKG_CHECK_MODULES([TSLIB], [tslib-0.0], [enable_tslib=yes], [enable_tslib=no, +- AC_MSG_WARN([*** no tslib -- tslib driver will not be built.])]) ++ PKG_CHECK_MODULES([TSLIB], [tslib-1.0 >= 1.0.0], [enable_tslib=yes], [enable_tslib=no]) ++ if test "$enable_tslib" = "no"; then ++ PKG_CHECK_MODULES([TSLIB], [tslib-0.0], [enable_tslib=yes], [enable_tslib=no, ++ AC_MSG_WARN([*** no tslib -- tslib driver will not be built.])]) ++ fi + fi + + enable_ucb1x00_ts=no diff --git a/packages/directfb/directfb-examples_1.2.0.bb b/packages/directfb/directfb-examples_1.2.0.bb new file mode 100644 index 0000000000..7fd3f38848 --- /dev/null +++ b/packages/directfb/directfb-examples_1.2.0.bb @@ -0,0 +1,17 @@ +DESCRIPTION = "DirectFB extra providers" +DEPENDS = "directfb" +SECTION = "libs" +LICENSE = "GPL" + +SRC_URI = " \ + http://www.directfb.org/downloads/Extras/DirectFB-examples-${PV}.tar.gz \ + " +S = "${WORKDIR}/DirectFB-examples-${PV}" + +inherit autotools + +do_stage() { + autotools_stage_all +} + + diff --git a/packages/directfb/directfb_1.2.3.bb b/packages/directfb/directfb_1.2.3.bb index 85e42a1fa3..e4d50a3458 100644 --- a/packages/directfb/directfb_1.2.3.bb +++ b/packages/directfb/directfb_1.2.3.bb @@ -1,13 +1,13 @@ require directfb.inc RV = "1.2-0" -PR = "r0" +PR = "r1" DEPENDS += "sysfsutils" SRC_URI = " \ http://www.directfb.org/downloads/Old/DirectFB-${PV}.tar.gz \ - file://fix-pkgconfig-cflags.patch;patch=1 \ + file://directfb-1.2.x-fix-pkgconfig-cflags.patch;patch=1 \ file://mkdfiff.patch;patch=1 \ file://dont-use-linux-config.patch;patch=1 \ file://ts_lib_autotools.patch;patch=1 \ diff --git a/packages/directfb/directfb_1.2.7.bb b/packages/directfb/directfb_1.2.7.bb new file mode 100644 index 0000000000..be6a6daa52 --- /dev/null +++ b/packages/directfb/directfb_1.2.7.bb @@ -0,0 +1,28 @@ +require directfb.inc + +RV = "1.2-0" +PR = "r0" + +DEPENDS += "sysfsutils" + +SRC_URI = " \ + http://directfb.org/downloads/Core/DirectFB-${PV}.tar.gz \ + file://directfb-1.2.x-fix-pkgconfig-cflags.patch;patch=1 \ + file://mkdfiff.patch;patch=1 \ + file://dont-use-linux-config.patch;patch=1 \ + file://ts_lib_autotools.patch;patch=1 \ +" + +EXTRA_OECONF = "\ + --enable-freetype=yes \ + --enable-zlib \ + --with-gfxdrivers=none \ + --disable-libmpeg3 \ + --disable-sdl \ + --disable-vnc \ + --disable-x11 \ +" + +LDFLAGS_append = "" + +LEAD_SONAME = "libdirectfb-1.2.so.0" diff --git a/packages/directfb/directfb-1.2.3/fix-pkgconfig-cflags.patch b/packages/directfb/files/directfb-1.2.x-fix-pkgconfig-cflags.patch index 745c561cc0..745c561cc0 100644 --- a/packages/directfb/directfb-1.2.3/fix-pkgconfig-cflags.patch +++ b/packages/directfb/files/directfb-1.2.x-fix-pkgconfig-cflags.patch diff --git a/packages/e17/e-wm/illume-disable-screensaver.patch b/packages/e17/e-wm/illume-disable-screensaver.patch new file mode 100644 index 0000000000..984895cf59 --- /dev/null +++ b/packages/e17/e-wm/illume-disable-screensaver.patch @@ -0,0 +1,13 @@ +Index: e/config/illume/e.src +=================================================================== +--- e.orig/config/illume/e.src 2009-01-30 23:34:37.000000000 +0100 ++++ e/config/illume/e.src 2009-01-30 23:34:54.000000000 +0100 +@@ -665,7 +665,7 @@ + value "display_res_height" int: 1; + value "display_res_hz" int: 0; + value "display_res_rotation" int: 0; +- value "screensaver_enable" int: 1; ++ value "screensaver_enable" int: 0; + value "screensaver_timeout" int: 30; + value "screensaver_interval" int: 5; + value "screensaver_blanking" int: 2; diff --git a/packages/e17/e-wm_svn.bb b/packages/e17/e-wm_svn.bb index d2c416c94f..e82cf6904e 100644 --- a/packages/e17/e-wm_svn.bb +++ b/packages/e17/e-wm_svn.bb @@ -2,7 +2,7 @@ DESCRIPTION = "The Enlightenment Window Manager Version 17" DEPENDS = "eet evas ecore edje efreet edbus" LICENSE = "MIT BSD" PV = "0.16.999.050+svnr${SRCREV}" -PR = "r2" +PR = "r3" inherit e update-alternatives @@ -70,6 +70,9 @@ SRC_URI = "\ file://applications.menu \ file://gsm-segfault-fix.patch;patch=1;maxrev=37617 \ " + +SRC_URI_append_openmoko = " file://illume-disable-screensaver.patch;patch=1 " + S = "${WORKDIR}/e" EXTRA_OECONF = "\ diff --git a/packages/gnome/gnome-games_2.24.0.bb b/packages/gnome/gnome-games_2.24.0.bb index a16e88b6e0..2f7800df03 100644 --- a/packages/gnome/gnome-games_2.24.0.bb +++ b/packages/gnome/gnome-games_2.24.0.bb @@ -3,7 +3,7 @@ DEPENDS = " guile libggz ggz-client-libs python-pygtk gtk+ libgnome libgnomeui l inherit gnome distutils-base gconf -PR = "r3" +PR = "r4" SRC_URI += "file://ggz-unbreak-m4.patch;patch=1 \ " diff --git a/packages/gnome/gnome-python-desktop_2.23.0.bb b/packages/gnome/gnome-python-desktop_2.23.0.bb index 140c0a8dbf..0ddc05e8e0 100644 --- a/packages/gnome/gnome-python-desktop_2.23.0.bb +++ b/packages/gnome/gnome-python-desktop_2.23.0.bb @@ -1,7 +1,7 @@ LICENSE = "GPL/LGPL" DEPENDS = "librsvg libwnck totem-pl-parser libgtop gnome-panel gnome-desktop eds-dbus python-pygtk gnome-python libgnomeprint libgnomeprintui" -PR = "r3" +PR = "r4" inherit gnome distutils-base diff --git a/packages/gnome/gnome-python-extras_2.19.1.bb b/packages/gnome/gnome-python-extras_2.19.1.bb index 9d8e786241..5ae9180067 100644 --- a/packages/gnome/gnome-python-extras_2.19.1.bb +++ b/packages/gnome/gnome-python-extras_2.19.1.bb @@ -1,6 +1,8 @@ LICENSE = "GPL/LGPL" DEPENDS = "python-pygtk libwnck" +PR = "r1" + inherit gnome distutils-base SRC_URI += "file://acinclude.m4" diff --git a/packages/gnome/gnome-python_2.22.1.bb b/packages/gnome/gnome-python_2.22.1.bb index 0507cba010..d1ac8cc7ab 100644 --- a/packages/gnome/gnome-python_2.22.1.bb +++ b/packages/gnome/gnome-python_2.22.1.bb @@ -3,7 +3,7 @@ LICENSE = "LGPL" DEPENDS = "libgnomeui pyorbit python-pygtk" RDEPENDS = "pyorbit" -PR = "r1" +PR = "r2" inherit gnome distutils-base pkgconfig diff --git a/packages/gnome/pyorbit_2.24.0.bb b/packages/gnome/pyorbit_2.24.0.bb index fe6e2d1b0b..c98b99d1d5 100644 --- a/packages/gnome/pyorbit_2.24.0.bb +++ b/packages/gnome/pyorbit_2.24.0.bb @@ -1,7 +1,7 @@ DESCRIPTION = "Python Orbit bindings" LICENSE = "LGPL" -PR = "r0" +PR = "r1" inherit gnome distutils-base pkgconfig diff --git a/packages/images/fso-image.bb b/packages/images/fso-image.bb index 4ed41b5e8d..4e3bfee64e 100644 --- a/packages/images/fso-image.bb +++ b/packages/images/fso-image.bb @@ -3,7 +3,7 @@ #------------------------------------------------------ PV = "1.1" -PR = "r3" +PR = "r4" # no languages for now IMAGE_LINGUAS = "" @@ -80,11 +80,11 @@ ZHONE_INSTALL = "\ # additional apps APPS_INSTALL = "\ -# tichy \ + paroli \ gpe-gallery \ gpe-sketchbook \ gpe-filemanager \ - vagalume \ + ${@base_conditional('ENTERPRISE_DISTRO', '1', '', 'vagalume', d)} \ starling \ " @@ -112,6 +112,8 @@ fso_rootfs_postprocess() { echo "alias pico=nano" >>./etc/profile echo "alias fso='cd /local/pkg/fso'" >>./etc/profile echo "alias ipkg='opkg'" >>./etc/profile + echo "alias vim=vi" >>./etc/profile + echo "alias ll='ls -al'" >>./etc/profile # nfs mkdir -p ./local/pkg echo >>./etc/fstab diff --git a/packages/kexecboot/kexecboot.inc b/packages/kexecboot/kexecboot.inc index 201d3116d8..5f3f34948e 100644 --- a/packages/kexecboot/kexecboot.inc +++ b/packages/kexecboot/kexecboot.inc @@ -36,4 +36,4 @@ FILES_${PN} += " ${bindir}/kexecboot /init /proc /mnt" pkg_postinst_${PN} () { ln -sf ${bindir}/kexecboot $D/init -}
\ No newline at end of file +} diff --git a/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb b/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb index 8ed15596ab..002ed7b200 100644 --- a/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb +++ b/packages/kexecboot/linux-kexecboot_2.6.21-hh20.bb @@ -4,7 +4,7 @@ DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_hx4700 = "1" DEFAULT_PREFERENCE_h2200 = "1" -PR = "r1" +PR = "r2" SRC_URI = "${HANDHELDS_CVS};module=linux/kernel26;tag=${@'K' + bb.data.getVar('PV',d,1).replace('.', '-')} \ file://linux-2.6.git-9d20fdd58e74d4d26dc5216efaaa0f800c23dd3a.patch;patch=1 \ diff --git a/packages/kexecboot/linux-kexecboot_2.6.24.bb b/packages/kexecboot/linux-kexecboot_2.6.24.bb index 4dd8edbde4..2c97cf6d35 100644 --- a/packages/kexecboot/linux-kexecboot_2.6.24.bb +++ b/packages/kexecboot/linux-kexecboot_2.6.24.bb @@ -1,6 +1,6 @@ require linux-kexecboot.inc -PR = "r6" +PR = "r7" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_collie = "-1" diff --git a/packages/kexecboot/linux-kexecboot_2.6.26.bb b/packages/kexecboot/linux-kexecboot_2.6.26.bb index 69b8075f6c..6c97db2341 100644 --- a/packages/kexecboot/linux-kexecboot_2.6.26.bb +++ b/packages/kexecboot/linux-kexecboot_2.6.26.bb @@ -1,6 +1,6 @@ require linux-kexecboot.inc -PR = "r10" +PR = "r11" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_qemuarm = "-1" DEFAULT_PREFERENCE_qemux86 = "-1" diff --git a/packages/linux/linux-omap-2.6.28/overo/defconfig b/packages/linux/linux-omap-2.6.28/overo/defconfig new file mode 100644 index 0000000000..c92e425140 --- /dev/null +++ b/packages/linux/linux-omap-2.6.28/overo/defconfig @@ -0,0 +1,1967 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-omap1 +# Wed Feb 4 12:40:38 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_TICK_GPTIMER=1 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_VENC=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OVERO=y +# CONFIG_MACH_OMAP3_PANDORA is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_ARM_ERRATUM_451034 is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_OMAP2 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_PWRBUTTON=y +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=8 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_N800 is not set +# CONFIG_CTRL_BLIZZARD is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +# CONFIG_SND is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_OMAP_EHCI_PHY_MODE=y +# CONFIG_OMAP_EHCI_TLL_MODE is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=y +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=m +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-omap/overo/defconfig b/packages/linux/linux-omap/overo/defconfig new file mode 100644 index 0000000000..c92e425140 --- /dev/null +++ b/packages/linux/linux-omap/overo/defconfig @@ -0,0 +1,1967 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-omap1 +# Wed Feb 4 12:40:38 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_TICK_GPTIMER=1 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +CONFIG_OMAP2_DSS_RFBI=y +CONFIG_OMAP2_DSS_VENC=y +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OVERO=y +# CONFIG_MACH_OMAP3_PANDORA is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_ARM_ERRATUM_451034 is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +# CONFIG_MTD_NAND_OMAP2 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_PWRBUTTON=y +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set + +# +# Digital terrestrial only tuners/PLL +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=8 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_N800 is not set +# CONFIG_CTRL_BLIZZARD is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +# CONFIG_SND is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_OMAP_EHCI_PHY_MODE=y +# CONFIG_OMAP_EHCI_TLL_MODE is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=y +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=m +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-omap_2.6.28.bb b/packages/linux/linux-omap_2.6.28.bb index f941a4d81c..21eb2cf6fb 100644 --- a/packages/linux/linux-omap_2.6.28.bb +++ b/packages/linux/linux-omap_2.6.28.bb @@ -3,7 +3,7 @@ require linux.inc DESCRIPTION = "Linux kernel for OMAP processors" KERNEL_IMAGETYPE = "uImage" -COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora" +COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_beagleboard = "1" diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb index 708abad181..5c082d28ed 100644 --- a/packages/linux/linux-omap_git.bb +++ b/packages/linux/linux-omap_git.bb @@ -3,7 +3,7 @@ require linux.inc DESCRIPTION = "Linux kernel for OMAP processors" KERNEL_IMAGETYPE = "uImage" -COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora" +COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_omap3evm = "1" diff --git a/packages/linux/linux-openmoko-2.6.28/0001-MERGE-via-pending-tracking-hist-subject-usb-gadget-r.patch b/packages/linux/linux-openmoko-2.6.28/0001-MERGE-via-pending-tracking-hist-subject-usb-gadget-r.patch new file mode 100644 index 0000000000..c228396a81 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0001-MERGE-via-pending-tracking-hist-subject-usb-gadget-r.patch @@ -0,0 +1,55 @@ +From f94d3fbb605ad16d701525502fbad114a950197c Mon Sep 17 00:00:00 2001 +From: merge <null@invalid> +Date: Mon, 19 Jan 2009 23:03:59 +0000 +Subject: [PATCH 1/8] MERGE-via-pending-tracking-hist-subject-usb-gadget-rndis-send- +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit +pending-tracking-hist top was subject-usb-gadget-rndis-send- / 3c29888770bfa8ce3a5e2ed590c3edb97ca4abaf ... parent commitmessage: +From: Richard Röjfors <richard.rojfors@endian.se> +Subject: USB: gadget rndis: send notifications + +X-Git-Tag: v2.6.28-rc6~2^2~2 +X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=ff3495052af48f7a2bf7961b131dc9e161dae19c;hp=9c264521a9f836541c122b00f505cfd60cc5bbb5 + +USB: gadget rndis: send notifications + +It turns out that atomic_inc_return() returns the *new* value +not the original one, so the logic in rndis_response_available() +kept the first RNDIS response notification from getting out. +This prevented interoperation with MS-Windows (but not Linux). + +Fix this to make RNDIS behave again. + +Signed-off-by: Richard Röjfors <richard.rojfors@endian.se> +Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> +Cc: stable <stable@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> +--- + drivers/usb/gadget/f_rndis.c | 3 +-- + 1 files changed, 1 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c +index 659b3d9..428b599 100644 +--- a/drivers/usb/gadget/f_rndis.c ++++ b/drivers/usb/gadget/f_rndis.c +@@ -172,7 +172,6 @@ static struct usb_interface_descriptor rndis_data_intf __initdata = { + .bDescriptorType = USB_DT_INTERFACE, + + /* .bInterfaceNumber = DYNAMIC */ +- .bAlternateSetting = 1, + .bNumEndpoints = 2, + .bInterfaceClass = USB_CLASS_CDC_DATA, + .bInterfaceSubClass = 0, +@@ -303,7 +302,7 @@ static void rndis_response_available(void *_rndis) + __le32 *data = req->buf; + int status; + +- if (atomic_inc_return(&rndis->notify_count)) ++ if (atomic_inc_return(&rndis->notify_count) != 1) + return; + + /* Send RNDIS RESPONSE_AVAILABLE notification; a +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0002-MERGE-via-pending-tracking-hist-subject-usb-gadget-f.patch b/packages/linux/linux-openmoko-2.6.28/0002-MERGE-via-pending-tracking-hist-subject-usb-gadget-f.patch new file mode 100644 index 0000000000..bfe9d08464 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0002-MERGE-via-pending-tracking-hist-subject-usb-gadget-f.patch @@ -0,0 +1,50 @@ +From e4e155b8e3aeebb54b4295bce17ef5e85decd44d Mon Sep 17 00:00:00 2001 +From: merge <null@invalid> +Date: Tue, 20 Jan 2009 10:40:16 +0000 +Subject: [PATCH 2/8] MERGE-via-pending-tracking-hist-subject-usb-gadget-fix-rndis-w +pending-tracking-hist top was subject-usb-gadget-fix-rndis-w / 8a5ccc279cef316a16f921d7486f4a9efa234493 ... parent commitmessage: +From: David Brownell <dbrownell@users.sourceforge.net> +Subject: USB: gadget: fix rndis working at high speed + +X-Git-Tag: v2.6.28-rc9~8^2~7 +X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=7c12414955e9b44a3e33d54e578bf008caa4475d + +USB: gadget: fix rndis working at high speed + +Fix a bug specific to highspeed mode in the recently updated RNDIS +support: it wasn't setting up the high speed notification endpoint, +which prevented high speed RNDIS links from working. + +Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> +Tested-by: Anand Gadiyar <gadiyar@ti.com> +Cc: stable <stable@kernel.org> +Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> +--- + drivers/usb/gadget/f_rndis.c | 4 ++++ + 1 files changed, 4 insertions(+), 0 deletions(-) + +diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c +index 428b599..3a8bb53 100644 +--- a/drivers/usb/gadget/f_rndis.c ++++ b/drivers/usb/gadget/f_rndis.c +@@ -651,6 +651,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) + fs_in_desc.bEndpointAddress; + hs_out_desc.bEndpointAddress = + fs_out_desc.bEndpointAddress; ++ hs_notify_desc.bEndpointAddress = ++ fs_notify_desc.bEndpointAddress; + + /* copy descriptors, and track endpoint copies */ + f->hs_descriptors = usb_copy_descriptors(eth_hs_function); +@@ -662,6 +664,8 @@ rndis_bind(struct usb_configuration *c, struct usb_function *f) + f->hs_descriptors, &hs_in_desc); + rndis->hs.out = usb_find_endpoint(eth_hs_function, + f->hs_descriptors, &hs_out_desc); ++ rndis->hs.notify = usb_find_endpoint(eth_hs_function, ++ f->hs_descriptors, &hs_notify_desc); + } + + rndis->port.open = rndis_open; +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0003-consider-alrm-enable-in-pcf50633_rtc_set_alarm.patch b/packages/linux/linux-openmoko-2.6.28/0003-consider-alrm-enable-in-pcf50633_rtc_set_alarm.patch new file mode 100644 index 0000000000..48cf384c67 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0003-consider-alrm-enable-in-pcf50633_rtc_set_alarm.patch @@ -0,0 +1,52 @@ +From 72669a7c7637dba5f4f2ae4a8301cf9560f0a807 Mon Sep 17 00:00:00 2001 +From: Werner Almesberger <werner@openmoko.org> +Date: Fri, 30 Jan 2009 08:07:27 +0000 +Subject: [PATCH 3/8] consider alrm->enable in pcf50633_rtc_set_alarm + +Backported to .28, original message below: + +Hi Balaji, + +Mickey mentioned to me that he had trouble with the RTC wakeup interrupt. +I had a quick look at the problem and it seems that alrm->enable doesn't +get propagated when setting the alarm time with RTC_WKALM_SET. + +Does something like my patch below look right ? We also don't handle +alrm->pending, but I'm not sure if we have to. + +I tested this only very lightly since my current andy-tracking crashes +in soc_suspend. If nobody else beats me to it, I'll have a look at it +tomorrow. + +- Werner + +---------------------------------- cut here ----------------------------------- + +According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time +and enables/disables the alarm. We implement RTC_WKALM_SET through +pcf50633_rtc_set_alarm. The enabling/disabling part was missing. + +Signed-off-by: Werner Almesberger <werner@openmoko.org> +Reported-by: Michael 'Mickey' Lauer <mickey@openmoko.org> +--- + drivers/rtc/rtc-pcf50633.c | 3 ++- + 1 files changed, 2 insertions(+), 1 deletions(-) + +diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c +index e1576d2..ddd6f89 100644 +--- a/drivers/rtc/rtc-pcf50633.c ++++ b/drivers/rtc/rtc-pcf50633.c +@@ -221,8 +221,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) + if (ret) + dev_err(dev, "Failed to write alarm time %d\n", ret); + +- if (!alarm_masked) ++ if (!alarm_masked || alrm->enabled) + pcf50633_irq_unmask(pcf, PCF50633_IRQ_ALARM); ++ pcf->rtc.alarm_enabled = alrm->enabled; + + return 0; + } +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0004-manage-RTC-alarm-pending-flag-of-PCF50633.patch b/packages/linux/linux-openmoko-2.6.28/0004-manage-RTC-alarm-pending-flag-of-PCF50633.patch new file mode 100644 index 0000000000..dadbd92941 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0004-manage-RTC-alarm-pending-flag-of-PCF50633.patch @@ -0,0 +1,64 @@ +From 1fb682d2dfdaa19a50073fec6239f2bda9dbcc71 Mon Sep 17 00:00:00 2001 +From: Werner Almesberger <werner@openmoko.org> +Date: Fri, 30 Jan 2009 14:37:40 +0000 +Subject: [PATCH 4/8] manage RTC alarm "pending" flag of PCF50633 + +Backported to .28, original message below: + +This patch adds setting and clearing of the "pending" flag of the +RTC alarm. The semantics follow the UEFI specification 2.2 available +at http://www.uefi.org/specs/, i.e., the "pending" flag is cleared +by disabling the alarm, but not by any other condition (such as the +passing of time, a successful wakeup, or setting of a new alarm.) + +Signed-off-by: Werner Almesberger <werner@openmoko.org> +--- + drivers/rtc/rtc-pcf50633.c | 5 +++++ + include/linux/mfd/pcf50633/rtc.h | 1 + + 2 files changed, 6 insertions(+), 0 deletions(-) + +diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c +index ddd6f89..0fdadbd 100644 +--- a/drivers/rtc/rtc-pcf50633.c ++++ b/drivers/rtc/rtc-pcf50633.c +@@ -185,6 +185,7 @@ static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) + pcf = dev_get_drvdata(dev); + + alrm->enabled = pcf->rtc.alarm_enabled; ++ alrm->pending = pcf->rtc.alarm_pending; + + ret = pcf50633_read_block(pcf, PCF50633_REG_RTCSCA, + PCF50633_TI_EXTENT, &pcf_tm.time[0]); +@@ -221,6 +222,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) + if (ret) + dev_err(dev, "Failed to write alarm time %d\n", ret); + ++ if (!alrm->enabled) ++ pcf->rtc.alarm_pending = 0; ++ + if (!alarm_masked || alrm->enabled) + pcf50633_irq_unmask(pcf, PCF50633_IRQ_ALARM); + pcf->rtc.alarm_enabled = alrm->enabled; +@@ -240,6 +244,7 @@ static void pcf50633_rtc_irq(struct pcf50633 *pcf, int irq, void *unused) + switch (irq) { + case PCF50633_IRQ_ALARM: + rtc_update_irq(pcf->rtc.rtc_dev, 1, RTC_AF | RTC_IRQF); ++ pcf->rtc.alarm_pending = 1; + break; + case PCF50633_IRQ_SECOND: + rtc_update_irq(pcf->rtc.rtc_dev, 1, RTC_PF | RTC_IRQF); +diff --git a/include/linux/mfd/pcf50633/rtc.h b/include/linux/mfd/pcf50633/rtc.h +index ce8ad8f..80cc6af 100644 +--- a/include/linux/mfd/pcf50633/rtc.h ++++ b/include/linux/mfd/pcf50633/rtc.h +@@ -34,6 +34,7 @@ + struct pcf50633_rtc { + int alarm_enabled; + int second_enabled; ++ int alarm_pending; + + struct rtc_device *rtc_dev; + struct platform_device *pdev; +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch b/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch new file mode 100644 index 0000000000..39ae653fef --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0005-debug-glamo-allow-slower-memory-bus.patch.patch @@ -0,0 +1,72 @@ +From 8c787f1c57c3b09beece662faabfab419ae5c8d6 Mon Sep 17 00:00:00 2001 +From: Andy Green <andy@openmoko.com> +Date: Wed, 28 Jan 2009 09:58:59 +0000 +Subject: [PATCH 5/8] debug-glamo-allow-slower-memory-bus.patch + +Signed-off-by: Andy Green <andy@openmoko.com> +--- + drivers/mfd/glamo/glamo-core.c | 34 +++++++++++++++++++++++++++++++++- + 1 files changed, 33 insertions(+), 1 deletions(-) + +diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c +index b4595a8..e6253de 100644 +--- a/drivers/mfd/glamo/glamo-core.c ++++ b/drivers/mfd/glamo/glamo-core.c +@@ -58,6 +58,25 @@ + + #define GLAMO_MEM_REFRESH_COUNT 0x100 + ++ ++/* ++ * Glamo internal settings ++ * ++ * We run the memory interface from the faster PLLB on 2.6.28 kernels and ++ * above. Couple of GTA02 users report trouble with memory bus when they ++ * upgraded from 2.6.24. So this parameter allows reversion to 2.6.24 ++ * scheme if their Glamo chip needs it. ++ * ++ * you can override the faster default on kernel commandline using ++ * ++ * glamo3362.slow_memory=1 ++ * ++ * for example ++ */ ++ ++static int slow_memory = 0; ++module_param(slow_memory, int, 0644); ++ + struct reg_range { + int start; + int count; +@@ -786,6 +805,19 @@ int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script, + while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3) + ; + break; ++ ++ /* ++ * couple of people reported artefacts with 2.6.28 changes, this ++ * allows reversion to 2.6.24 settings ++ */ ++ ++ case 0x200: ++ if (slow_memory) ++ __reg_write(glamo, script[i].reg, 0xef0); ++ else ++ __reg_write(glamo, script[i].reg, 0xe03); ++ break; ++ + default: + __reg_write(glamo, script[i].reg, script[i].val); + break; +@@ -848,7 +880,7 @@ static struct glamo_script glamo_init_script[] = { + * b7..b4 = 0 = no wait states on read or write + * b0 = 1 select PLL2 for Host interface, b1 = enable it + */ +- { 0x200, 0x0e03 }, ++ { 0x200, 0x0e03 /* this is replaced by script parser */ }, + { 0x202, 0x07ff }, + { 0x212, 0x0000 }, + { 0x214, 0x4000 }, +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0006-Subject-fix_glamo_xrandr_bug.patch.patch b/packages/linux/linux-openmoko-2.6.28/0006-Subject-fix_glamo_xrandr_bug.patch.patch new file mode 100644 index 0000000000..b65e3513c2 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0006-Subject-fix_glamo_xrandr_bug.patch.patch @@ -0,0 +1,46 @@ +From d0bc6c5baae3a711f5039ea5440bafb37ebdfc24 Mon Sep 17 00:00:00 2001 +From: Balaji Rao <balajirrao@openmoko.org> +Date: Wed, 28 Jan 2009 19:30:45 +0000 +Subject: [PATCH 6/8] Subject: fix_glamo_xrandr_bug.patch + +fix_glamo_xrandr_bug.patch + +This patch reintroduces the 2-cycle delay used when accessing glamo-fb +registers. This seems to be required even when the corresponding +registers in HOST_BUS are off. + +Signed-off-by: Balaji Rao <balajirrao@openmoko.org> +--- + drivers/mfd/glamo/glamo-fb.c | 10 ++++++++++ + 1 files changed, 10 insertions(+), 0 deletions(-) + +diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c +index 64fe464..91cf75b 100644 +--- a/drivers/mfd/glamo/glamo-fb.c ++++ b/drivers/mfd/glamo/glamo-fb.c +@@ -86,12 +86,22 @@ static struct platform_device glamo_spi_dev = { + static int reg_read(struct glamofb_handle *glamo, + u_int16_t reg) + { ++ int i = 0; ++ ++ for (i = 0; i != 2; i ++) ++ nop(); ++ + return readw(glamo->base + reg); + } + + static void reg_write(struct glamofb_handle *glamo, + u_int16_t reg, u_int16_t val) + { ++ int i = 0; ++ ++ for (i = 0; i != 2; i ++) ++ nop(); ++ + writew(val, glamo->base + reg); + } + +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0007-Subject-glamo_fix_improper_xrandr_geometry_setting.patch b/packages/linux/linux-openmoko-2.6.28/0007-Subject-glamo_fix_improper_xrandr_geometry_setting.patch new file mode 100644 index 0000000000..0856e06020 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0007-Subject-glamo_fix_improper_xrandr_geometry_setting.patch @@ -0,0 +1,216 @@ +From 3192193f8a1a799783963aaf10119b39c3e8df24 Mon Sep 17 00:00:00 2001 +From: Balaji Rao <balajirrao@openmoko.org> +Date: Thu, 29 Jan 2009 18:25:32 +0000 +Subject: [PATCH 7/8] Subject: glamo_fix_improper_xrandr_geometry_setting.patch + +glamo_fix_improper_xrandr_geometry_setting.patch + +Switching to xrandr -o 3 from xrandr -o 1 caused the screen to look crazy +because of the way lcd geometry is set in glamo. This patch fixes it. + +Signed-off-by: Balaji Rao <balajirrao@openmoko.org> +--- + drivers/mfd/glamo/glamo-fb.c | 109 ++++++++++++++++++----------------------- + 1 files changed, 48 insertions(+), 61 deletions(-) + +diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c +index 91cf75b..16531fa 100644 +--- a/drivers/mfd/glamo/glamo-fb.c ++++ b/drivers/mfd/glamo/glamo-fb.c +@@ -75,6 +75,7 @@ struct glamofb_handle { + int cursor_on; + u_int32_t pseudo_pal[16]; + spinlock_t lock_cmd; ++ int angle; /* Current rotation angle */ + }; + + /* 'sibling' spi device for lcm init */ +@@ -255,11 +256,6 @@ static void reg_set_bit_mask(struct glamofb_handle *glamo, + #define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF + #define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF + +-enum orientation { +- ORIENTATION_PORTRAIT, +- ORIENTATION_LANDSCAPE +-}; +- + + /* the caller has to enxure lock_cmd is held and we are in cmd mode */ + static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) +@@ -275,17 +271,22 @@ static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) + switch (rotation) { + case FB_ROTATE_UR: + glamo_rot = GLAMO_LCD_ROT_MODE_0; ++ glamo->angle = 0; + break; + case FB_ROTATE_CW: + glamo_rot = GLAMO_LCD_ROT_MODE_90; ++ glamo->angle = 90; + break; + case FB_ROTATE_UD: + glamo_rot = GLAMO_LCD_ROT_MODE_180; ++ glamo->angle = 180; + break; + case FB_ROTATE_CCW: + glamo_rot = GLAMO_LCD_ROT_MODE_270; ++ glamo->angle = 270; + break; + default: ++ glamo->angle = 0; + glamo_rot = GLAMO_LCD_ROT_MODE_0; + break; + } +@@ -301,38 +302,12 @@ static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) + GLAMO_LCD_MODE1_ROTATE_EN : 0); + } + +-static enum orientation get_orientation(struct fb_var_screeninfo *var) +-{ +- if (var->xres <= var->yres) +- return ORIENTATION_PORTRAIT; +- +- return ORIENTATION_LANDSCAPE; +-} +- +-static int will_orientation_change(struct fb_var_screeninfo *var) +-{ +- enum orientation orient = get_orientation(var); +- +- switch (orient) { +- case ORIENTATION_LANDSCAPE: +- if (var->rotate == FB_ROTATE_UR || +- var->rotate == FB_ROTATE_UD) +- return 1; +- break; +- case ORIENTATION_PORTRAIT: +- if (var->rotate == FB_ROTATE_CW || +- var->rotate == FB_ROTATE_CCW) +- return 1; +- break; +- } +- return 0; +-} +- + static void glamofb_update_lcd_controller(struct glamofb_handle *glamo, + struct fb_var_screeninfo *var) + { +- int sync, bp, disp, fp, total, xres, yres, pitch, orientation_changing; ++ int sync, bp, disp, fp, total, pitch; + unsigned long flags; ++ int width, height; + + if (!glamo || !var) + return; +@@ -355,31 +330,52 @@ static void glamofb_update_lcd_controller(struct glamofb_handle *glamo, + GLAMO_ENGINE_LCD, + var->pixclock); + +- xres = var->xres; +- yres = var->yres; ++ if (glamo->angle == 90 || glamo->angle == 270) { ++ /* ++ * But if we are going back to portrait mode from here, ++ * we get inverted values from Xglamo ++ */ ++ if (!(var->rotate == FB_ROTATE_UR || ++ var->rotate == FB_ROTATE_UD)) { ++ width = var->yres; ++ height = var->xres; ++ } else { ++ width = var->xres; ++ height = var->yres; ++ } + +- /* figure out if orientation is going to change */ +- orientation_changing = will_orientation_change(var); ++ } else { ++ width = var->xres; ++ height = var->yres; ++ } + +- /* adjust the pitch according to new orientation to come */ ++ /* Portrait ? */ ++ if (var->rotate == FB_ROTATE_UR || var->rotate == FB_ROTATE_UD) { ++ /* We don't need to set xres and yres in this particular case ++ * because Xglamo does it for us */ ++ if (!(glamo->angle == 90 || glamo->angle == 270)) { ++ var->xres = width;var->yres = height; ++ } + +- if (orientation_changing) { +- pitch = var->yres * var->bits_per_pixel / 8; +- } else { +- pitch = var->xres * var->bits_per_pixel / 8; +- } ++ var->xres_virtual = width * 2; ++ var->yres_virtual = height; ++ pitch = width * var->bits_per_pixel / 8; ++ } else { ++ var->xres = height; ++ var->yres = width; ++ var->xres_virtual = height; ++ var->yres_virtual = width * 2; ++ pitch = height * var->bits_per_pixel / 8; ++ } + +- /* +- * set the desired LCD geometry +- */ + reg_set_bit_mask(glamo, + GLAMO_REG_LCD_WIDTH, + GLAMO_LCD_WIDTH_MASK, +- xres); ++ width); + reg_set_bit_mask(glamo, + GLAMO_REG_LCD_HEIGHT, + GLAMO_LCD_HEIGHT_MASK, +- yres); ++ height); + reg_set_bit_mask(glamo, + GLAMO_REG_LCD_PITCH, + GLAMO_LCD_PITCH_MASK, +@@ -388,22 +384,11 @@ static void glamofb_update_lcd_controller(struct glamofb_handle *glamo, + /* honour the rotation request */ + __rotate_lcd(glamo, var->rotate); + +- /* update the reported geometry of the framebuffer. */ +- if (orientation_changing) { +- var->xres_virtual = var->xres = yres; +- var->xres_virtual *= 2; +- var->yres_virtual = var->yres = xres; +- } else { +- var->xres_virtual = var->xres = xres; +- var->yres_virtual = var->yres = yres; +- var->yres_virtual *= 2; +- } +- + /* update scannout timings */ + sync = 0; + bp = sync + var->hsync_len; + disp = bp + var->left_margin; +- fp = disp + xres; ++ fp = disp + width; + total = fp + var->right_margin; + + reg_set_bit_mask(glamo, GLAMO_REG_LCD_HORIZ_TOTAL, +@@ -420,7 +405,7 @@ static void glamofb_update_lcd_controller(struct glamofb_handle *glamo, + sync = 0; + bp = sync + var->vsync_len; + disp = bp + var->upper_margin; +- fp = disp + yres; ++ fp = disp + height; + total = fp + var->lower_margin; + + reg_set_bit_mask(glamo, GLAMO_REG_LCD_VERT_TOTAL, +@@ -836,6 +821,8 @@ static int __init glamofb_probe(struct platform_device *pdev) + glamofb->fb = fbinfo; + glamofb->dev = &pdev->dev; + ++ glamofb->angle = 0; ++ + strcpy(fbinfo->fix.id, "SMedia Glamo"); + + glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28/0008-Send-pen-up-events-faster-side-effect-improve-illu.patch b/packages/linux/linux-openmoko-2.6.28/0008-Send-pen-up-events-faster-side-effect-improve-illu.patch new file mode 100644 index 0000000000..5960ad0c37 --- /dev/null +++ b/packages/linux/linux-openmoko-2.6.28/0008-Send-pen-up-events-faster-side-effect-improve-illu.patch @@ -0,0 +1,41 @@ +From 5e50f877f7ef2309a5318fc6ceed4903d1d80a64 Mon Sep 17 00:00:00 2001 +From: Nelson Castillo <arhuaco@freaks-unidos.net> +Date: Thu, 29 Jan 2009 14:27:25 +0000 +Subject: [PATCH 8/8] Send pen-up events faster (side effect: improve illume keyboard responsiveness) +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +We were waiting 60ms before reporting a pen-up event to avoid +jitter. Now we wait 8ms (actually 5 with HZ == 200). + +Thanks to Marco Trevisan for testing and pointing out that there was a +problem that could be spotted with the illume keyboard. +Note that I used the Terminal mode of the keyboard (no dictionary) +for tests. + +I also used touch_test.py and the jitter doesn't seem to be an +issue when drawing lines with the finger. + +Reported-by: Marco Trevisan (Treviño) <mail@3v1n0.net> +Signed-off-by: Nelson Castillo <arhuaco@freaks-unidos.net> +--- + drivers/input/touchscreen/s3c2410_ts.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c +index bc9b410..a37adc9 100644 +--- a/drivers/input/touchscreen/s3c2410_ts.c ++++ b/drivers/input/touchscreen/s3c2410_ts.c +@@ -96,7 +96,7 @@ MODULE_LICENSE("GPL"); + + static char *s3c2410ts_name = "s3c2410 TouchScreen"; + +-#define TS_RELEASE_TIMEOUT (HZ >> 4) /* ~ 60 milliseconds */ ++#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */ + #define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */ + + #define TS_STATE_STANDBY 0 /* initial state */ +-- +1.5.2.2 + diff --git a/packages/linux/linux-openmoko-2.6.28_git.bb b/packages/linux/linux-openmoko-2.6.28_git.bb index e37742caa2..8774721308 100644 --- a/packages/linux/linux-openmoko-2.6.28_git.bb +++ b/packages/linux/linux-openmoko-2.6.28_git.bb @@ -8,11 +8,19 @@ KERNEL_VERSION = "${KERNEL_RELEASE}" OEV = "oe1" PV = "${KERNEL_RELEASE}-${OEV}+gitr${SRCREV}" -PR = "r2" +PR = "r3" SRC_URI = "\ git://git.openmoko.org/git/kernel.git;protocol=git;branch=andy-tracking \ file://openwrt-ledtrig-netdev.patch;patch=1 \ + file://0001-MERGE-via-pending-tracking-hist-subject-usb-gadget-r.patch;patch=1 \ + file://0002-MERGE-via-pending-tracking-hist-subject-usb-gadget-f.patch;patch=1 \ + file://0003-consider-alrm-enable-in-pcf50633_rtc_set_alarm.patch;patch=1 \ + file://0004-manage-RTC-alarm-pending-flag-of-PCF50633.patch;patch=1 \ + file://0005-debug-glamo-allow-slower-memory-bus.patch.patch;patch=1 \ + file://0006-Subject-fix_glamo_xrandr_bug.patch.patch;patch=1 \ + file://0007-Subject-glamo_fix_improper_xrandr_geometry_setting.patch;patch=1 \ + file://0008-Send-pen-up-events-faster-side-effect-improve-illu.patch;patch=1 \ file://defconfig-oe.patch \ " S = "${WORKDIR}/git" diff --git a/packages/linux/linux-rp-2.6.24/defconfig-tosa b/packages/linux/linux-rp-2.6.24/defconfig-tosa index d62547505c..a7b8a8229e 100644 --- a/packages/linux/linux-rp-2.6.24/defconfig-tosa +++ b/packages/linux/linux-rp-2.6.24/defconfig-tosa @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24 -# Wed Jun 4 12:21:16 2008 +# Wed Feb 4 10:30:32 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -158,6 +158,7 @@ CONFIG_PXA_SHARPSL=y # CONFIG_MACH_ARMCORE is not set CONFIG_PXA_SHARPSL_25x=y # CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_HTCUNIVERSAL is not set # CONFIG_MACH_POODLE is not set # CONFIG_MACH_CORGI is not set # CONFIG_MACH_SHEPHERD is not set @@ -757,7 +758,17 @@ CONFIG_NETDEV_10000=y # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m # # USB Network Adapters @@ -828,7 +839,6 @@ CONFIG_INPUT_POWER=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y -# CONFIG_SHARPSL_RC is not set # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set @@ -837,6 +847,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_CORGI is not set # CONFIG_KEYBOARD_SPITZ is not set +# CONFIG_SHARPSL_RC is not set CONFIG_KEYBOARD_TOSA=y # CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set CONFIG_KEYBOARD_GPIO=y @@ -998,6 +1009,8 @@ CONFIG_MFD_CORE=y # CONFIG_MFD_TC6387XB is not set CONFIG_MFD_TC6393XB=y # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set # # Multimedia devices diff --git a/packages/linux/linux-rp_2.6.24.bb b/packages/linux/linux-rp_2.6.24.bb index 95063f8df1..8c7a22d00f 100644 --- a/packages/linux/linux-rp_2.6.24.bb +++ b/packages/linux/linux-rp_2.6.24.bb @@ -1,6 +1,6 @@ require linux-rp.inc -PR = "r20" +PR = "r21" DEFAULT_PREFERENCE = "-1" DEFAULT_PREFERENCE_collie = "1" diff --git a/packages/netbase/netbase/om-gta01/interfaces b/packages/netbase/netbase/om-gta01/interfaces index df85b1e854..56c485ef75 100644 --- a/packages/netbase/netbase/om-gta01/interfaces +++ b/packages/netbase/netbase/om-gta01/interfaces @@ -16,7 +16,7 @@ iface eth1 inet dhcp # Ethernet/RNDIS gadget (g_ether) # ... or on host side, usbnet and random hwaddr -auto usb0 +allow-hotplug usb0 iface usb0 inet static address 192.168.0.202 netmask 255.255.255.0 diff --git a/packages/netbase/netbase/om-gta02/interfaces b/packages/netbase/netbase/om-gta02/interfaces index 6caf915794..ceedfc59c2 100644 --- a/packages/netbase/netbase/om-gta02/interfaces +++ b/packages/netbase/netbase/om-gta02/interfaces @@ -16,7 +16,7 @@ iface eth1 inet dhcp # Ethernet/RNDIS gadget (g_ether) # ... or on host side, usbnet and random hwaddr -auto usb0 +allow-hotplug usb0 iface usb0 inet static address 192.168.0.202 netmask 255.255.255.0 diff --git a/packages/netbase/netbase_4.21.bb b/packages/netbase/netbase_4.21.bb index 9d5f2c6826..fd0fb6dac2 100644 --- a/packages/netbase/netbase_4.21.bb +++ b/packages/netbase/netbase_4.21.bb @@ -2,7 +2,7 @@ DESCRIPTION = "This package provides the necessary \ infrastructure for basic TCP/IP based networking." SECTION = "base" LICENSE = "GPL" -PR = "r30" +PR = "r31" inherit update-rc.d diff --git a/packages/numptyphysics/numptyphysics/numptyphysics.desktop b/packages/numptyphysics/numptyphysics/numptyphysics.desktop index b85265ab6f..5ebefb66d9 100644 --- a/packages/numptyphysics/numptyphysics/numptyphysics.desktop +++ b/packages/numptyphysics/numptyphysics/numptyphysics.desktop @@ -2,7 +2,7 @@ Name=numptyphysics Comment=Physics Game Note=Simulate Objects -Exec=xrandr -o 3 && numptyphysics -geometry 640x480; xrandr -o 0 +Exec=numptyphysics Icon=star.png Type=Application Categories=Games diff --git a/packages/numptyphysics/numptyphysics_svn.bb b/packages/numptyphysics/numptyphysics_svn.bb index 56187d7bb0..d8247b588a 100644 --- a/packages/numptyphysics/numptyphysics_svn.bb +++ b/packages/numptyphysics/numptyphysics_svn.bb @@ -6,6 +6,7 @@ LICENSE = "GPL" HOMEPAGE = "http://numptyphysics.garage.maemo.org/" SECTION = "x11/games" PV = "0.2+svnr${SRCREV}" +PR = "r1" inherit autotools diff --git a/packages/pciutils/pciutils-3.1.2/pciutils.patch b/packages/pciutils/pciutils-3.1.2/pciutils.patch new file mode 100644 index 0000000000..c058d6ef99 --- /dev/null +++ b/packages/pciutils/pciutils-3.1.2/pciutils.patch @@ -0,0 +1,362 @@ +diff -urN pciutils-3.1.2.orig/lib/configure pciutils-3.1.2.new/lib/configure +--- pciutils-3.1.2.orig/lib/configure 2009-01-30 14:06:25.000000000 +0100 ++++ pciutils-3.1.2.new/lib/configure 2009-02-04 18:45:31.000000000 +0100 +@@ -14,11 +14,6 @@ + fi + } + +-if [ -z "$VERSION" -o -z "$IDSDIR" ] ; then +- echo >&2 "Please run the configure script from the top-level Makefile" +- exit 1 +-fi +- + echo_n "Configuring libpci for your system..." + if [ -z "$HOST" ] ; then + sys=`uname -s` +@@ -44,8 +39,8 @@ + [ -n "$RELEASE" ] && rel="${RELEASE}" + # CAVEAT: tr on Solaris is a bit weird and the extra [] is otherwise harmless. + host=`echo $HOST | sed -e 's/^\([^-]*\)-\([^-]*\)-\([^-]*\)-\([^-]*\)$/\1-\3/' -e 's/^\([^-]*\)-\([^-]*\)$/\1--\2/' | tr '[A-Z]' '[a-z]'` +-cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-sys=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++sys=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` ++cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + echo " $host $rel $cpu $sys" + + c=config.h +diff -urN pciutils-3.1.2.orig/Makefile pciutils-3.1.2.new/Makefile +--- pciutils-3.1.2.orig/Makefile 2009-02-01 17:49:22.000000000 +0100 ++++ pciutils-3.1.2.new/Makefile 2009-02-04 13:32:50.000000000 +0100 +@@ -52,7 +52,8 @@ + + export + +-all: lib/$(PCILIB) lspci setpci example lspci.8 setpci.8 pcilib.7 update-pciids update-pciids.8 $(PCI_IDS) ++all: lib/$(PCILIB) lspci setpci example lspci.8 setpci.8 pcilib.7 update-pciids update-pciids.8 $(PCI_IDS) \ ++ pcimodules pcimodules.8 + + lib/$(PCILIB): $(PCIINC) force + $(MAKE) -C lib all +@@ -62,9 +63,11 @@ + lib/config.h lib/config.mk: + cd lib && ./configure + ++pcimodules: pcimodules.o common.o lib/$(PCILIB) + lspci: lspci.o ls-vpd.o ls-caps.o ls-ecaps.o ls-kernel.o ls-tree.o ls-map.o common.o lib/$(PCILIB) + setpci: setpci.o common.o lib/$(PCILIB) + ++pcimodules.o: pcimodules.c pciutils.h + LSPCIINC=lspci.h pciutils.h $(PCIINC) + lspci.o: lspci.c $(LSPCIINC) + ls-vpd.o: ls-vpd.c $(LSPCIINC) +@@ -101,10 +104,10 @@ + install: all + # -c is ignored on Linux, but required on FreeBSD + $(DIRINSTALL) -m 755 $(DESTDIR)$(SBINDIR) $(DESTDIR)$(IDSDIR) $(DESTDIR)$(MANDIR)/man8 $(DESTDIR)$(MANDIR)/man7 +- $(INSTALL) -c -m 755 $(STRIP) lspci setpci $(DESTDIR)$(SBINDIR) ++ $(INSTALL) -c -m 755 $(STRIP) lspci setpci pcimodules $(DESTDIR)$(SBINDIR) + $(INSTALL) -c -m 755 update-pciids $(DESTDIR)$(SBINDIR) + $(INSTALL) -c -m 644 $(PCI_IDS) $(DESTDIR)$(IDSDIR) +- $(INSTALL) -c -m 644 lspci.8 setpci.8 update-pciids.8 $(DESTDIR)$(MANDIR)/man8 ++ $(INSTALL) -c -m 644 lspci.8 setpci.8 update-pciids.8 pcimodules.8 $(DESTDIR)$(MANDIR)/man8 + $(INSTALL) -c -m 644 pcilib.7 $(DESTDIR)$(MANDIR)/man7 + ifeq ($(SHARED),yes) + $(DIRINSTALL) -m 755 $(DESTDIR)$(LIBDIR) +@@ -122,9 +125,10 @@ + endif + + uninstall: all +- rm -f $(DESTDIR)$(SBINDIR)/lspci $(DESTDIR)$(SBINDIR)/setpci $(DESTDIR)$(SBINDIR)/update-pciids ++ rm -f $(DESTDIR)$(SBINDIR)/lspci $(DESTDIR)$(SBINDIR)/setpci $(DESTDIR)$(SBINDIR)/update-pciids $(DESTDIR)$(SBINDIR)/pcimodules ++ + rm -f $(DESTDIR)$(IDSDIR)/$(PCI_IDS) +- rm -f $(DESTDIR)$(MANDIR)/man8/lspci.8 $(DESTDIR)$(MANDIR)/man8/setpci.8 $(DESTDIR)$(MANDIR)/man8/update-pciids.8 ++ rm -f $(DESTDIR)$(MANDIR)/man8/lspci.8 $(DESTDIR)$(MANDIR)/man8/setpci.8 $(DESTDIR)$(MANDIR)/man8/update-pciids.8 $(DESTDIR)$(MANDIR)/man8/pcimodules.8 + rm -f $(DESTDIR)$(MANDIR)/man7/pcilib.7 + ifeq ($(SHARED),yes) + rm -f $(DESTDIR)$(LIBDIR)/$(PCILIB) $(DESTDIR)$(LIBDIR)/$(LIBNAME).so$(ABI_VERSION) +diff -urN pciutils-3.1.2.orig/pcimodules.c pciutils-3.1.2.new/pcimodules.c +--- pciutils-3.1.2.orig/pcimodules.c 1970-01-01 01:00:00.000000000 +0100 ++++ pciutils-3.1.2.new/pcimodules.c 2009-02-04 12:19:47.000000000 +0100 +@@ -0,0 +1,185 @@ ++/* ++ * pcimodules: Load all kernel modules for PCI device currently ++ * plugged into any PCI slot. ++ * ++ * Copyright 2000 Yggdrasil Computing, Incorporated ++ * This file may be copied under the terms and conditions of version ++ * two of the GNU General Public License, as published by the Free ++ * Software Foundation (Cambridge, Massachusetts, USA). ++ * ++ * This file is based on pciutils/lib/example.c, which has the following ++ * authorship and copyright statement: ++ * ++ * Written by Martin Mares and put to public domain. You can do ++ * with it anything you want, but I don't give you any warranty. ++ */ ++ ++#include <stdlib.h> ++#include <stdio.h> ++#include <malloc.h> ++#include <string.h> ++#include <unistd.h> ++#include <sys/utsname.h> ++#include <sys/param.h> ++#include <sys/types.h> ++ ++#define _GNU_SOURCE ++#include <getopt.h> ++ ++#include "pciutils.h" ++ ++#define MODDIR "/lib/modules" ++#define PCIMAP "modules.pcimap" ++ ++#define LINELENGTH 8000 ++ ++#define DEVICE_ANY 0xffffffff ++#define VENDOR_ANY 0xffffffff ++ ++#include "lib/pci.h" ++ ++ const char program_name[] = "lspci"; ++ ++struct pcimap_entry { ++ unsigned int vendor, subsys_vendor, dev, subsys_dev, class, class_mask; ++ char *module; ++ struct pcimap_entry *next; ++}; ++ ++static struct pcimap_entry *pcimap_list = NULL; ++ ++#define OPT_STRING "h" ++static struct option long_options[] = { ++ {"class", required_argument, NULL, 'c'}, ++ {"classmask", required_argument, NULL, 'm'}, ++ {"help", no_argument, NULL, 'h'}, ++ { 0, 0, 0, 0} ++}; ++ ++static unsigned long desired_class; ++static unsigned long desired_classmask; /* Default is 0: accept all classes.*/ ++ ++void ++read_pcimap(void) ++{ ++ struct utsname utsname; ++ char filename[MAXPATHLEN]; ++ FILE *pcimap_file; ++ char line[LINELENGTH]; ++ struct pcimap_entry *entry; ++ unsigned int driver_data; ++ char *prevmodule = ""; ++ char module[LINELENGTH]; ++ ++ if (uname(&utsname) < 0) { ++ perror("uname"); ++ exit(1); ++ } ++ sprintf(filename, "%s/%s/%s", MODDIR, utsname.release, PCIMAP); ++ if ((pcimap_file = fopen(filename, "r")) == NULL) { ++ perror(filename); ++ exit(1); ++ } ++ ++ while(fgets(line, LINELENGTH, pcimap_file) != NULL) { ++ if (line[0] == '#') ++ continue; ++ ++ entry = xmalloc(sizeof(struct pcimap_entry)); ++ ++ if (sscanf(line, "%s 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x", ++ module, ++ &entry->vendor, &entry->dev, ++ &entry->subsys_vendor, &entry->subsys_dev, ++ &entry->class, &entry->class_mask, ++ &driver_data) != 8) { ++ fprintf (stderr, ++ "modules.pcimap unparsable line: %s.\n", line); ++ free(entry); ++ continue; ++ } ++ ++ /* Optimize memory allocation a bit, in case someday we ++ have Linux systems with ~100,000 modules. It also ++ allows us to just compare pointers to avoid trying ++ to load a module twice. */ ++ if (strcmp(module, prevmodule) != 0) { ++ prevmodule = xmalloc(strlen(module)+1); ++ strcpy(prevmodule, module); ++ } ++ entry->module = prevmodule; ++ entry->next = pcimap_list; ++ pcimap_list = entry; ++ } ++ fclose(pcimap_file); ++} ++ ++/* Return a filled in pci_access->dev tree, with the device classes ++ stored in dev->aux. ++*/ ++static void ++match_pci_modules(void) ++{ ++ struct pci_access *pacc; ++ struct pci_dev *dev; ++ unsigned int class, subsys_dev, subsys_vendor; ++ struct pcimap_entry *map; ++ const char *prevmodule = ""; ++ ++ pacc = pci_alloc(); /* Get the pci_access structure */ ++ /* Set all options you want -- here we stick with the defaults */ ++ pci_init(pacc); /* Initialize the PCI library */ ++ pci_scan_bus(pacc); /* We want to get the list of devices */ ++ for(dev=pacc->devices; dev; dev=dev->next) { ++ pci_fill_info(dev, PCI_FILL_IDENT | PCI_FILL_BASES); ++ class = (pci_read_word(dev, PCI_CLASS_DEVICE) << 8) ++ | pci_read_byte(dev, PCI_CLASS_PROG); ++ subsys_dev = pci_read_word(dev, PCI_SUBSYSTEM_ID); ++ subsys_vendor = pci_read_word(dev,PCI_SUBSYSTEM_VENDOR_ID); ++ for(map = pcimap_list; map != NULL; map = map->next) { ++ if (((map->class ^ class) & map->class_mask) == 0 && ++ ((desired_class ^ class) & desired_classmask)==0 && ++ (map->dev == DEVICE_ANY || ++ map->dev == dev->device_id) && ++ (map->vendor == VENDOR_ANY || ++ map->vendor == dev->vendor_id) && ++ (map->subsys_dev == DEVICE_ANY || ++ map->subsys_dev == subsys_dev) && ++ (map->subsys_vendor == VENDOR_ANY || ++ map->subsys_vendor == subsys_vendor) && ++ prevmodule != map->module) { ++ printf("%s\n", map->module); ++ prevmodule = map->module; ++ } ++ } ++ ++ } ++ pci_cleanup(pacc); ++} ++ ++int ++main (int argc, char **argv) ++{ ++ int opt_index = 0; ++ int opt; ++ ++ while ((opt = getopt_long(argc, argv, OPT_STRING, long_options, ++ &opt_index)) != -1) { ++ switch(opt) { ++ case 'c': ++ desired_class = strtol(optarg, NULL, 0); ++ break; ++ case 'm': ++ desired_classmask = strtol(optarg, NULL, 0); ++ break; ++ case 'h': ++ printf ("Usage: pcimodules [--help]\n" ++ " Lists kernel modules corresponding to PCI devices currently plugged" ++ " into the computer.\n"); ++ } ++ } ++ ++ read_pcimap(); ++ match_pci_modules(); ++ return 0; ++} +diff -urN pciutils-3.1.2.orig/pcimodules.man pciutils-3.1.2.new/pcimodules.man +--- pciutils-3.1.2.orig/pcimodules.man 1970-01-01 01:00:00.000000000 +0100 ++++ pciutils-3.1.2.new/pcimodules.man 2009-02-04 12:19:53.000000000 +0100 +@@ -0,0 +1,92 @@ ++.TH pcimodules 8 "@TODAY@" "@VERSION@" "Linux PCI Utilities" ++.IX pcimodules ++.SH NAME ++pcimodules \- List kernel driver modules available for all currently plugged ++in PCI devices ++.SH SYNOPSIS ++.B pcimodules ++.RB [ --class class_id ] ++.RB [ --classmask mask ] ++.RB [ --help ] ++.SH DESCRIPTION ++.B pcimodules ++lists all driver modules for all currently plugged in PCI devices. ++.B pcimodules ++should be run at boot time, and whenever a PCI device is "hot plugged" ++into the system. This can be done by the following Bourne shell syntax: ++.IP ++ for module in $(pcimodules) ; do ++.IP ++ modprobe -s -k "$module" ++.IP ++ done ++.PP ++When a PCI device is removed from the system, the Linux kernel will ++decrement a usage count on PCI driver module. If this count drops ++to zero (i.e., there are no PCI drivers), then the ++.B modprobe -r ++process that is normally configured to run from cron every few minutes ++will eventually remove the unneeded module. ++.PP ++The --class and --classmask arguments can be used to limit the search ++to certain classes of PCI devices. This is useful, for example, to ++generate a list of ethernet card drivers to be loaded when the kernel ++has indicated that it is trying to resolve an unknown network interface. ++.PP ++Modules are listed in the order in which the PCI devices are physically ++arranged so that the computer owner can arrange things like having scsi ++device 0 be on a controller that is not alphabetically the first scsi ++controller. ++.SH OPTIONS ++.TP ++.B --class class --classmask mask ++.PP ++--class and --classmask limit the search to PCI ++cards in particular classes. These arguments are always used together. ++The arguments to --class and --classmask ++can be given as hexadecimal numbers by prefixing a leading "0x". ++Note that the classes used by pcimodules are in "Linux" format, ++meaning the class value that you see with lspci would be shifted ++left eight bits, with the new low eight bits programming interface ID. ++An examples of how to use class and classmask is provided below. ++.B --help, -h ++Print a help message and exit. ++.SH EXAMPLES ++.TP ++pcimodules ++lists all modules corresponding to currently plugged in PCI devices. ++.TP ++pcimodules --class 0x200000 --classmask 0xffff00 ++lists all modules corresponding to currently plugged in ethernet PCI devices. ++.SH FILES ++.TP ++.B /lib/modules/<kernel-version>/modules.pcimap ++This file is automatically generated by ++.B depmod, ++and used by ++.B pcimodules ++to determine which modules correspond to which PCI ID's. ++.TP ++.B /proc/bus/pci ++An interface to PCI bus configuration space provided by the post-2.1.82 Linux ++kernels. Contains per-bus subdirectories with per-card config space files and a ++.I devices ++file containing a list of all PCI devices. ++ ++.SH SEE ALSO ++.BR lspci (8) ++ ++.SH MAINTAINER ++The Linux PCI Utilities are maintained by Martin Mares <mj@suse.cz>. ++ ++.SH AUTHOR ++.B pcimodules ++was written by Adam J. Richter <adam@yggdrasil.com>, based on public ++domain example code by Martin Mares <mj@suse.cz>. ++ ++.SH COPYRIGHT ++.B pcimodules ++is copyright 2000, Yggdrasil Computing, Incorporated, and may ++be copied under the terms and conditions of version 2 of the GNU ++General Public License as published by the Free Software Foundation ++(Cambrige, Massachusetts, United States of America). diff --git a/packages/pciutils/pciutils_3.1.2.bb b/packages/pciutils/pciutils_3.1.2.bb new file mode 100644 index 0000000000..25782a5549 --- /dev/null +++ b/packages/pciutils/pciutils_3.1.2.bb @@ -0,0 +1,59 @@ +DESCRIPTION = 'The PCI Utilities package contains a library for portable access \ +to PCI bus configuration space and several utilities based on this library.' +DESCRIPTION_pciutils-ids = 'The list of PCI IDs for pciutils' +SECTION = "console/utils" +HOMEPAGE = "http://atrey.karlin.mff.cuni.cz/~mj/pciutils.shtml" +LICENSE = "GPLv2" +DEPENDS = "zlib" + +SRC_URI = "ftp://ftp.kernel.org/pub/software/utils/pciutils/pciutils-${PV}.tar.bz2 \ + file://pciutils.patch;patch=1 " + +PARALLEL_MAKE = "" + +PR ="r2" + +EXTRA_OEMAKE += "'STRIP = '" +export SHARED=yes + +do_configure () { + (cd lib && ./configure ${datadir} ${PV} ${TARGET_OS} 2.4.21 ${TARGET_ARCH}) +} + +export PREFIX = "${D}${prefix}" +export SBINDIR = "${D}${sbindir}" +export SHAREDIR = "${D}${datadir}" +export MANDIR = "${D}${mandir}" + +do_install () { + oe_runmake install +} + +do_install_append () { + install -d ${D}/${prefix}/share + install -m 6440 ${WORKDIR}/${PN}-${PV}/pci.ids ${D}/${prefix}/share + + # The makefile does not install the development files: + # libpci.so pci.h header.h config.h types.h + install -d ${D}/${libdir} + install -d ${D}/${includedir}/pci + + oe_libinstall -so -C lib libpci ${D}/${libdir} + install -m 0644 ${S}/lib/pci.h ${D}/${includedir}/pci/ + install -m 0644 ${S}/lib/header.h ${D}/${includedir}/pci/ + install -m 0644 ${S}/lib/config.h ${D}/${includedir}/pci/ + install -m 0644 ${S}/lib/types.h ${D}/${includedir}/pci/ +} + +do_stage () { + oe_libinstall -so -C lib libpci ${STAGING_LIBDIR} + install -m 0755 -d ${STAGING_INCDIR}/pci + install -m 0644 ${S}/lib/pci.h ${STAGING_INCDIR}/pci/ + install -m 0644 ${S}/lib/header.h ${STAGING_INCDIR}/pci/ + install -m 0644 ${S}/lib/config.h ${STAGING_INCDIR}/pci/ + install -m 0644 ${S}/lib/types.h ${STAGING_INCDIR}/pci/ +} + + +PACKAGES =+ "pciutils-ids" +FILES_pciutils-ids="${prefix}/share/pci.ids" diff --git a/packages/powervr-drivers/libgles-omap3.inc b/packages/powervr-drivers/libgles-omap3.inc index b9933aadfa..3533c47ad9 100644 --- a/packages/powervr-drivers/libgles-omap3.inc +++ b/packages/powervr-drivers/libgles-omap3.inc @@ -52,7 +52,8 @@ do_install () { cp -pP ${BINLOCATION}/pvrsrvinit ${D}${bindir}/ cp -pP ${BINLOCATION}/xgles1test1 ${D}${bindir}/ - cp -pP ${BINLOCATION}/freedesktop/usr/X11R6_SGX/bin/Xsgx ${D}${bindir}/ + cp -pP ${BINLOCATION}/freedesktop/kdrive/usr/X11R6_SGX/bin/Xsgx || true + cp -pP ${BINLOCATION}/freedesktop/usr/X11R6_SGX/bin/Xsgx ${D}${bindir}/ || true install -d ${D}${includedir} cp -pPR ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/Include/* ${D}${includedir}/ diff --git a/packages/powervr-drivers/libgles-omap3_3.00.00.06.bb b/packages/powervr-drivers/libgles-omap3_3.00.00.06.bb new file mode 100644 index 0000000000..8a1ea57371 --- /dev/null +++ b/packages/powervr-drivers/libgles-omap3_3.00.00.06.bb @@ -0,0 +1,20 @@ +require libgles-omap3.inc + +# Not released yet +DEFAULT_PREFERENCE = "-1" +PR = "r2" + +SGXPV = "3_00_00_06" + +do_accept_license() { + export HOME="${WORKDIR}" + echo "Y +q +Y +${S}" | ${WORKDIR}/OMAP35x_Graphics_SDK_setuplinux_${SGXPV}.bin +} + +# Quality control is really poor on these SDKs, so hack around the latest madness: +FILES_${PN} += "${libdir}/*.so" +FILES_${PN}-dev = "${includedir}" + diff --git a/packages/python/python-coherence_0.6.0.bb b/packages/python/python-coherence_0.6.0.bb index f22d1039c2..8be13c3af5 100644 --- a/packages/python/python-coherence_0.6.0.bb +++ b/packages/python/python-coherence_0.6.0.bb @@ -2,7 +2,7 @@ DESCRIPTION = "Coherence is a DLNA/UPnP mediaserver + backends" SECTION = "python/devel" LICENSE = "MIT" HOMEPAGE = "http://coherence.beebits.net/wiki" -PR = "r0" +PR = "r1" inherit setuptools @@ -10,4 +10,6 @@ SRC_URI = "http://coherence.beebits.net/download/Coherence-${PV}.tar.gz" S = "${WORKDIR}/Coherence-${PV}" FILES_${PN} += "${datadir}" +RDEPENDS_${PN} += "python-twisted" + diff --git a/packages/python/python-twisted_8.2.0.bb b/packages/python/python-twisted_8.2.0.bb new file mode 100644 index 0000000000..78234187fb --- /dev/null +++ b/packages/python/python-twisted_8.2.0.bb @@ -0,0 +1,212 @@ +DESCRIPTION = "Twisted is an event-driven networking framework written in Python and licensed under the LGPL. \ +Twisted supports TCP, UDP, SSL/TLS, multicast, Unix sockets, a large number of protocols \ +(including HTTP, NNTP, IMAP, SSH, IRC, FTP, and others), and much more." +HOMEPAGE = "http://www.twistedmatrix.com" +SECTION = "console/network" +PRIORITY = "optional" +LICENSE = "LGPL" +PR = "r1" + +SRC_URI = "http://tmrc.mit.edu/mirror/twisted/Twisted/8.2/Twisted-${PV}.tar.bz2 " +S = "${WORKDIR}/Twisted-${PV}" + +inherit setuptools + +PACKAGES += "\ + ${PN}-zsh \ + ${PN}-test \ + ${PN}-protocols \ + ${PN}-bin \ + ${PN}-conch \ + ${PN}-lore \ + ${PN}-mail \ + ${PN}-names \ + ${PN}-news \ + ${PN}-runner \ + ${PN}-web \ + ${PN}-words \ + ${PN}-flow \ + ${PN}-pair \ + ${PN}-core \ +" + +RDEPENDS = "python-core python-zopeinterface" +RDEPENDS_${PN} += "\ + ${PN}-bin \ + ${PN}-conch \ + ${PN}-lore \ + ${PN}-mail \ + ${PN}-names \ + ${PN}-news \ + ${PN}-runner \ + ${PN}-web \ + ${PN}-words \ +" + +ALLOW_EMPTY = "1" +FILES_${PN} = "" + +FILES_${PN}-test = " \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/test \ +" + +FILES_${PN}-protocols = " \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/protocols/ \ +" + +FILES_${PN}-zsh = " \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/python/zsh \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/python/zshcomp.* \ +" + +FILES_${PN}-bin = " \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/protocols/_c_urlarg.so \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/spread/cBanana.so \ +" + +FILES_${PN}-conch = " \ + ${bindir}/ckeygen \ + ${bindir}/tkconch \ + ${bindir}/conch \ + ${bindir}/conchftp \ + ${bindir}/cftp \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_conch.py* \ + ${libdir}/${PYTHON_DIR}/site-packages/twisted/conch \ +" + +FILES_${PN}-core = " \ +${bindir}/manhole \ +${bindir}/mktap \ +${bindir}/twistd \ +${bindir}/tap2deb \ +${bindir}/tap2rpm \ +${bindir}/tapconvert \ +${bindir}/tkmktap \ +${bindir}/trial \ +${bindir}/easy_install* \ +${bindir}/pyhtmlizer \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/*.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/__init__.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/notestplugin.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/testplugin.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_ftp.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_inet.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_manhole.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_portforward.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_socks.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_telnet.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_trial.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/dropin.cache \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/application \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/cred \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/enterprise \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/internet \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/manhole \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/manhole \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/persisted \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/protocols\ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python\ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/timeoutqueue.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/filepath.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/dxprofile.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/plugin.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/htmlizer.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/__init__.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/dispatch.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/hook.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/threadpool.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/otp.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/usage.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/roots.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/versions.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/urlpath.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/util.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/components.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/logfile.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/runtime.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/reflect.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/context.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/threadable.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/rebuild.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/failure.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/lockfile.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/formmethod.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/finalize.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/win32.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/dist.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/shortcut.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/zipstream.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/release.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/syslog.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/log.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/compat.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/zshcomp.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/procutils.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/text.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/_twisted_zsh_stub \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/scripts/ \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/spread/ \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/tap/ \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/trial/ \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/__init__.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/_version.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/copyright.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/im.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/*.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/python/*.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/*.py* \ +" + +FILES_${PN}-lore = " \ +${bindir}/bookify \ +${bindir}/lore \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_lore.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/lore \ +" + +FILES_${PN}-mail = " \ +${bindir}/mailmail \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_mail.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/mail \ +" + +FILES_${PN}-names = " \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_names.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/names \ +" + +FILES_${PN}-news = " \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_news.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/news \ +" + +FILES_${PN}-runner = " \ +${libdir}/site-packages/twisted/runner/portmap.so \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/runner\ +" + +FILES_${PN}-web = " \ +${bindir}/websetroot \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_web.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/web\ +" + +FILES_${PN}-words = " \ +${bindir}/im \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_words.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/words\ +" + +FILES_${PN}-flow = " \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_flow.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/flow \" + +FILES_${PN}-pair = " \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/plugins/twisted_pair.py* \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/pair \ +" + +FILES_${PN}-dbg += " \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/*/.debug \ +${libdir}/${PYTHON_DIR}/site-packages/twisted/*/*/.debug \ +" diff --git a/packages/tasks/task-fso-compliance.bb b/packages/tasks/task-fso-compliance.bb index c39df67513..62193ff817 100644 --- a/packages/tasks/task-fso-compliance.bb +++ b/packages/tasks/task-fso-compliance.bb @@ -2,7 +2,7 @@ DESCRIPTION = "The freesmartphone.org framework -- install this task to make you SECTION = "fso/base" LICENSE = "MIT" PV = "1.0" -PR = "r6" +PR = "r7" inherit task @@ -11,13 +11,13 @@ RDEPENDS_${PN} = "\ frameworkd \ # fso-apmd \ fso-gpsd \ -# fso-monitord \ + fso-monitord \ connman \ connman-scripts \ connman-plugin-bluetooth \ # connman-plugin-dhclient \ # connman-plugin-dnsproxy \ - connman-plugin-ethernet \ +# connman-plugin-ethernet \ # connman-plugin-fake \ connman-plugin-loopback \ connman-plugin-pppd \ diff --git a/packages/tasks/task-sdk-bare.bb b/packages/tasks/task-sdk-bare.bb index ab338e6301..85d362612f 100644 --- a/packages/tasks/task-sdk-bare.bb +++ b/packages/tasks/task-sdk-bare.bb @@ -8,7 +8,7 @@ PACKAGES = "${PN}" GLIBC_PKGS = "\ glibc \ glibc-dbg \ - glibc-dev \ + virtual-libc-dev \ glibc-utils \ libsegfault \ glibc-thread-db \ diff --git a/packages/vagalume/vagalume_0.7.bb b/packages/vagalume/vagalume_0.7.bb index bb7985337c..f541dcdbb3 100644 --- a/packages/vagalume/vagalume_0.7.bb +++ b/packages/vagalume/vagalume_0.7.bb @@ -3,6 +3,7 @@ AUTHOR = "agarcia@igalia.com" HOMEPAGE = "http://people.igalia.com/berto/" SECTION = "x11" DEPENDS = "gtk+ gstreamer" +RRECOMMENDS = "dbus-x11" PR = "r0" SRC_URI = "\ diff --git a/packages/wpa-supplicant/wpa-supplicant-0.6.inc b/packages/wpa-supplicant/wpa-supplicant-0.6.inc index 779bee7487..aee9ced4f7 100644 --- a/packages/wpa-supplicant/wpa-supplicant-0.6.inc +++ b/packages/wpa-supplicant/wpa-supplicant-0.6.inc @@ -63,7 +63,8 @@ do_install () { install -d ${D}/${sysconfdir}/dbus-1/system.d install -m 644 ${S}/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d install -d ${D}/${datadir}/dbus-1/system-services - install -m 644 ${S}/dbus-wpa_supplicant.service ${D}/${datadir}/dbus-1/system-services + sed -i -e s:${base_sbindir}:${sbindir}:g ${S}/dbus-wpa_supplicant.service + install -m 644 ${S}/dbus-wpa_supplicant.service ${D}/${datadir}/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service ln -s /etc/wpa_supplicant/ifupdown.sh ${D}${sysconfdir}/network/if-pre-up.d/wpasupplicant ln -s /etc/wpa_supplicant/ifupdown.sh ${D}${sysconfdir}/network/if-post-down.d/wpasupplicant diff --git a/packages/wpa-supplicant/wpa-supplicant_0.6.7.bb b/packages/wpa-supplicant/wpa-supplicant_0.6.7.bb index 11fc774a18..4712d9ec26 100644 --- a/packages/wpa-supplicant/wpa-supplicant_0.6.7.bb +++ b/packages/wpa-supplicant/wpa-supplicant_0.6.7.bb @@ -1,3 +1,3 @@ require wpa-supplicant-0.6.inc -PR = "r2" +PR = "r4" diff --git a/packages/xorg-xserver/xserver-xorg-conf_0.1.bb b/packages/xorg-xserver/xserver-xorg-conf_0.1.bb index ea1581ba9a..23dcf182e3 100644 --- a/packages/xorg-xserver/xserver-xorg-conf_0.1.bb +++ b/packages/xorg-xserver/xserver-xorg-conf_0.1.bb @@ -1,5 +1,5 @@ DESCRIPTION = "Machine specific xorg.conf files" -PR = "r2" +PR = "r3" SRC_URI = "file://xorg.conf" diff --git a/packages/xserver-kdrive-common/xserver-kdrive-common/openmoko/Xserver b/packages/xserver-kdrive-common/xserver-kdrive-common/openmoko/Xserver index 95f5751782..7c70b2f82f 100644 --- a/packages/xserver-kdrive-common/xserver-kdrive-common/openmoko/Xserver +++ b/packages/xserver-kdrive-common/xserver-kdrive-common/openmoko/Xserver @@ -128,7 +128,7 @@ case `module_id` in fi ARGS="$ARGS -dpi 181 -screen 320x320 -hide-cursor $PPM" ;; "Motorola Ezx Platform") - ARGS="$ARGS -dpi 170 -screen ${SCREEN_SIZE} -hide-cursor -root-ppm /usr/share/pixmaps/xsplash-qvga.ppm vt1" ;; + ARGS="$ARGS -dpi 170 -screen ${SCREEN_SIZE} -hide-cursor -mouse tslib -root-ppm /usr/share/pixmaps/xsplash-qvga.ppm vt1" ;; "Glofiish M800") ARGS="$ARGS -dpi 285 -screen ${SCREEN_SIZE} -mouse tslib -hide-cursor -root-ppm /usr/share/pixmaps/xsplash-vga.ppm vt1" ;; "Freescale MX21ADS") |