diff options
Diffstat (limited to 'packages')
| -rw-r--r-- | packages/images/beagleboard-demo-image.bb | 2 | ||||
| -rw-r--r-- | packages/linux/linux-omap2-git/omap3evm/flash.patch | 558 | ||||
| -rw-r--r-- | packages/linux/linux-omap2-git/omap3evm/no-harry-potter.diff | 11 | ||||
| -rw-r--r-- | packages/linux/linux-omap2_git.bb | 1 |
4 files changed, 12 insertions, 560 deletions
diff --git a/packages/images/beagleboard-demo-image.bb b/packages/images/beagleboard-demo-image.bb index 5d7b0981b8..4dde217cef 100644 --- a/packages/images/beagleboard-demo-image.bb +++ b/packages/images/beagleboard-demo-image.bb @@ -20,7 +20,7 @@ IMAGE_INSTALL = "\ e-wm exhibit \ xterm xmms epiphany-firefox-replacement \ hicolor-icon-theme gnome-icon-theme \ - jaaa octave nmap iperf gnuplot \ + jaaa nmap iperf gnuplot \ abiword gnumeric gimp minimo \ powertop \ " diff --git a/packages/linux/linux-omap2-git/omap3evm/flash.patch b/packages/linux/linux-omap2-git/omap3evm/flash.patch deleted file mode 100644 index 4c76cd97bd..0000000000 --- a/packages/linux/linux-omap2-git/omap3evm/flash.patch +++ /dev/null @@ -1,558 +0,0 @@ -diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile -index 13d0043..d582b8f 100644 ---- a/arch/arm/mach-omap2/Makefile -+++ b/arch/arm/mach-omap2/Makefile -@@ -44,7 +44,8 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \ - board-omap3evm-flash.o - obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \ - usb-musb.o usb-ehci.o \ -- hsmmc.o -+ hsmmc.o \ -+ board-omap3beagle-flash.o - obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \ - hsmmc.o \ - usb-musb.o -diff --git a/arch/arm/mach-omap2/board-omap3beagle-flash.c b/arch/arm/mach-omap2/board-omap3beagle-flash.c -new file mode 100644 -index 0000000..5346df0 ---- /dev/null -+++ b/arch/arm/mach-omap2/board-omap3beagle-flash.c -@@ -0,0 +1,119 @@ -+/* -+ * board-omap3beagle-flash.c -+ * -+ * Copyright (c) 2008 Texas Instruments -+ * -+ * Modified from board-omap3evm-flash.c -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/platform_device.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/mtd/nand.h> -+#include <linux/types.h> -+#include <linux/io.h> -+ -+#include <asm/mach/flash.h> -+#include <asm/arch/board.h> -+#include <asm/arch/gpmc.h> -+#include <asm/arch/nand.h> -+ -+#define GPMC_CS0_BASE 0x60 -+#define GPMC_CS_SIZE 0x30 -+ -+static struct mtd_partition omap3beagle_nand_partitions[] = { -+ /* All the partition sizes are listed in terms of NAND block size */ -+ { -+ .name = "X-Loader", -+ .offset = 0, -+ .size = 4*(64 * 2048), -+ .mask_flags = MTD_WRITEABLE, /* force read-only */ -+ }, -+ { -+ .name = "U-Boot", -+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ -+ .size = 15*(64 * 2048), -+ .mask_flags = MTD_WRITEABLE, /* force read-only */ -+ }, -+ { -+ .name = "U-Boot Env", -+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ -+ .size = 1*(64 * 2048), -+ }, -+ { -+ .name = "Kernel", -+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ -+ .size = 32*(64 * 2048), -+ }, -+ { -+ .name = "File System", -+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ -+ .size = MTDPART_SIZ_FULL, -+ }, -+}; -+ -+static struct omap_nand_platform_data omap3beagle_nand_data = { -+ .parts = omap3beagle_nand_partitions, -+ .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), -+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -+ .nand_setup = NULL, -+ .dev_ready = NULL, -+}; -+ -+static struct resource omap3beagle_nand_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device omap3beagle_nand_device = { -+ .name = "omap2-nand", -+ .id = -1, -+ .dev = { -+ .platform_data = &omap3beagle_nand_data, -+ }, -+ .num_resources = 1, -+ .resource = &omap3beagle_nand_resource, -+}; -+ -+ -+void __init omap3beagle_flash_init(void) -+{ -+ u8 cs = 0; -+ u8 nandcs = GPMC_CS_NUM + 1; -+ -+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; -+ -+ /* find out the chip-select on which NAND exists */ -+ while (cs < GPMC_CS_NUM) { -+ u32 ret = 0; -+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); -+ -+ if ((ret & 0xC00) == 0x800) { -+ printk(KERN_INFO "Found NAND on CS%d\n", cs); -+ if (nandcs > GPMC_CS_NUM) -+ nandcs = cs; -+ } -+ cs++; -+ } -+ -+ if (nandcs > GPMC_CS_NUM) { -+ printk(KERN_INFO "NAND: Unable to find configuration " -+ "in GPMC\n "); -+ return; -+ } -+ -+ if (nandcs < GPMC_CS_NUM) { -+ omap3beagle_nand_data.cs = nandcs; -+ omap3beagle_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add + -+ GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); -+ omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); -+ -+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); -+ if (platform_device_register(&omap3beagle_nand_device) < 0) -+ printk(KERN_ERR "Unable to register NAND device\n"); -+ } -+} -diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c -index c992cc7..99e042e 100644 ---- a/arch/arm/mach-omap2/board-omap3beagle.c -+++ b/arch/arm/mach-omap2/board-omap3beagle.c -@@ -94,6 +94,7 @@ static void __init omap3_beagle_init(void) - hsmmc_init(); - usb_musb_init(); - usb_ehci_init(); -+ omap3beagle_flash_init(); - } - - arch_initcall(omap3_beagle_i2c_init); -diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig -index 3d5e432..02b9ced 100644 ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -71,7 +71,7 @@ config MTD_NAND_AMS_DELTA - - config MTD_NAND_OMAP2 - tristate "NAND Flash device on OMAP 2420H4/2430SDP boards" -- depends on (ARM && ARCH_OMAP2 && MTD_NAND) -+ depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3) - help - Support for NAND flash on Texas Instruments 2430SDP/2420H4 platforms. - -diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c -index 3b7307c..3aac1d2 100644 ---- a/drivers/mtd/nand/omap2.c -+++ b/drivers/mtd/nand/omap2.c -@@ -111,15 +111,6 @@ - static const char *part_probes[] = { "cmdlinepart", NULL }; - #endif - --static int hw_ecc = 1; -- --/* new oob placement block for use with hardware ecc generation */ --static struct nand_ecclayout omap_hw_eccoob = { -- .eccbytes = 12, -- .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13}, -- .oobfree = {{16, 32}, {33, 63} }, --}; -- - struct omap_nand_info { - struct nand_hw_control controller; - struct omap_nand_platform_data *pdata; -@@ -133,6 +124,13 @@ struct omap_nand_info { - void __iomem *gpmc_cs_baseaddr; - void __iomem *gpmc_baseaddr; - }; -+ -+/* -+ * omap_nand_wp - This function enable or disable the Write Protect feature on -+ * NAND device -+ * @mtd: MTD device structure -+ * @mode: WP ON/OFF -+ */ - static void omap_nand_wp(struct mtd_info *mtd, int mode) - { - struct omap_nand_info *info = container_of(mtd, -@@ -189,11 +187,11 @@ static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) - } - - /* --* omap_read_buf - read data from NAND controller into buffer --* @mtd: MTD device structure --* @buf: buffer to store date --* @len: number of bytes to read --*/ -+ * omap_read_buf - read data from NAND controller into buffer -+ * @mtd: MTD device structure -+ * @buf: buffer to store date -+ * @len: number of bytes to read -+ */ - static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) - { - struct omap_nand_info *info = container_of(mtd, -@@ -207,11 +205,11 @@ static void omap_read_buf(struct mtd_info *mtd, u_char *buf, int len) - } - - /* --* omap_write_buf - write buffer to NAND controller --* @mtd: MTD device structure --* @buf: data buffer --* @len: number of bytes to write --*/ -+ * omap_write_buf - write buffer to NAND controller -+ * @mtd: MTD device structure -+ * @buf: data buffer -+ * @len: number of bytes to write -+ */ - static void omap_write_buf(struct mtd_info *mtd, const u_char * buf, int len) - { - struct omap_nand_info *info = container_of(mtd, -@@ -250,10 +248,16 @@ static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len) - return 0; - } - -+#ifdef CONFIG_MTD_NAND_OMAP_HWECC -+/* -+ * omap_hwecc_init-Initialize the Hardware ECC for NAND flash in GPMC controller -+ * @mtd: MTD device structure -+ */ - static void omap_hwecc_init(struct mtd_info *mtd) - { - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); -+ register struct nand_chip *chip = mtd->priv; - unsigned long val = 0x0; - - /* Read from ECC Control Register */ -@@ -264,16 +268,15 @@ static void omap_hwecc_init(struct mtd_info *mtd) - - /* Read from ECC Size Config Register */ - val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); -- /* ECCSIZE1=512 | ECCSIZE0=8bytes | Select eccResultsize[0123] */ -- val = ((0x000000FF<<22) | (0x00000003<<12) | (0x0000000F)); -+ /* ECCSIZE1=512 | Select eccResultsize[0-3] */ -+ val = ((((chip->ecc.size >> 1) - 1) << 22) | (0x0000000F)); - __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_SIZE_CONFIG); -- -- - } - - /* -- * This function will generate true ECC value, which can be used -+ * gen_true_ecc - This function will generate true ECC value, which can be used - * when correcting data read from NAND flash memory core -+ * @ecc_buf: buffer to store ecc code - */ - static void gen_true_ecc(u8 *ecc_buf) - { -@@ -289,8 +292,12 @@ static void gen_true_ecc(u8 *ecc_buf) - } - - /* -- * This function compares two ECC's and indicates if there is an error. -- * If the error can be corrected it will be corrected to the buffer -+ * omap_compare_ecc - This function compares two ECC's and indicates if there -+ * is an error. If the error can be corrected it will be corrected to the -+ * buffer -+ * @ecc_data1: ecc code from nand spare area -+ * @ecc_data2: ecc code from hardware register obtained from hardware ecc -+ * @page_data: page data - */ - static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ - u8 *ecc_data2, /* read from register */ -@@ -409,6 +416,14 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */ - } - } - -+/* -+ * omap_correct_data - Compares the ecc read from nand spare area with ECC -+ * registers values and corrects one bit error if it has occured -+ * @mtd: MTD device structure -+ * @dat: page data -+ * @read_ecc: ecc read from nand flash -+ * @calc_ecc: ecc read from ECC registers -+ */ - static int omap_correct_data(struct mtd_info *mtd, u_char * dat, - u_char * read_ecc, u_char * calc_ecc) - { -@@ -436,65 +451,64 @@ static int omap_correct_data(struct mtd_info *mtd, u_char * dat, - } - - /* --** Generate non-inverted ECC bytes. --** --** Using noninverted ECC can be considered ugly since writing a blank --** page ie. padding will clear the ECC bytes. This is no problem as long --** nobody is trying to write data on the seemingly unused page. --** --** Reading an erased page will produce an ECC mismatch between --** generated and read ECC bytes that has to be dealt with separately. --*/ -+ * omap_calcuate_ecc - Generate non-inverted ECC bytes. -+ * Using noninverted ECC can be considered ugly since writing a blank -+ * page ie. padding will clear the ECC bytes. This is no problem as long -+ * nobody is trying to write data on the seemingly unused page. Reading -+ * an erased page will produce an ECC mismatch between generated and read -+ * ECC bytes that has to be dealt with separately. -+ * @mtd: MTD device structure -+ * @dat: The pointer to data on which ecc is computed -+ * @ecc_code: The ecc_code buffer -+ */ - static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat, - u_char *ecc_code) - { - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - unsigned long val = 0x0; -- unsigned long reg, n; -- -- /* Ex NAND_ECC_HW12_2048 */ -- if ((info->nand.ecc.mode == NAND_ECC_HW) && -- (info->nand.ecc.size == 2048)) -- n = 4; -- else -- n = 1; -+ unsigned long reg; - - /* Start Reading from HW ECC1_Result = 0x200 */ - reg = (unsigned long)(info->gpmc_baseaddr + GPMC_ECC1_RESULT); -- while (n--) { -- val = __raw_readl(reg); -- *ecc_code++ = val; /* P128e, ..., P1e */ -- *ecc_code++ = val >> 16; /* P128o, ..., P1o */ -- /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ -- *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); -- reg += 4; -- } -+ val = __raw_readl(reg); -+ *ecc_code++ = val; /* P128e, ..., P1e */ -+ *ecc_code++ = val >> 16; /* P128o, ..., P1o */ -+ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ -+ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); -+ reg += 4; - - return 0; --} /* omap_calculate_ecc */ -+} - -+/* -+ * omap_enable_hwecc - This function enables the hardware ecc functionality -+ * @mtd: MTD device structure -+ * @mode: Read/Write mode -+ */ - static void omap_enable_hwecc(struct mtd_info *mtd, int mode) - { - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); -+ register struct nand_chip *chip = mtd->priv; -+ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; - unsigned long val = __raw_readl(info->gpmc_baseaddr + GPMC_ECC_CONFIG); - - switch (mode) { - case NAND_ECC_READ : - __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); -- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ -- val = (1 << 7) | (0x0) | (0x1) ; -+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ -+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); - break; - case NAND_ECC_READSYN : -- __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); -- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ -- val = (1 << 7) | (0x0) | (0x1) ; -+ __raw_writel(0x100, info->gpmc_baseaddr + GPMC_ECC_CONTROL); -+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ -+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); - break; - case NAND_ECC_WRITE : - __raw_writel(0x101, info->gpmc_baseaddr + GPMC_ECC_CONTROL); -- /* ECC 16 bit col) | ( CS 0 ) | ECC Enable */ -- val = (1 << 7) | (0x0) | (0x1) ; -+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ -+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1); - break; - default: - DEBUG(MTD_DEBUG_LEVEL0, "Error: Unrecognized Mode[%d]!\n", -@@ -504,7 +518,38 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int mode) - - __raw_writel(val, info->gpmc_baseaddr + GPMC_ECC_CONFIG); - } -+#endif - -+/* -+ * omap_wait - Wait function is called during Program and erase -+ * operations and the way it is called from MTD layer, we should wait -+ * till the NAND chip is ready after the programming/erase operation -+ * has completed. -+ * @mtd: MTD device structure -+ * @chip: NAND Chip structure -+ */ -+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip) -+{ -+ register struct nand_chip *this = mtd->priv; -+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, -+ mtd); -+ int status = 0; -+ -+ this->IO_ADDR_W = (void *) info->gpmc_cs_baseaddr + -+ GPMC_CS_NAND_COMMAND; -+ this->IO_ADDR_R = (void *) info->gpmc_cs_baseaddr + GPMC_CS_NAND_DATA; -+ -+ while (!(status & 0x40)) { -+ __raw_writeb(NAND_CMD_STATUS & 0xFF, this->IO_ADDR_W); -+ status = __raw_readb(this->IO_ADDR_R); -+ } -+ return status; -+} -+ -+/* -+ * omap_dev_ready - calls the platform specific dev_ready function -+ * @mtd: MTD device structure -+ */ - static int omap_dev_ready(struct mtd_info *mtd) - { - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, -@@ -534,7 +579,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) - struct omap_nand_info *info; - struct omap_nand_platform_data *pdata; - int err; -- unsigned long val; -+ unsigned long val; - - - pdata = pdev->dev.platform_data; -@@ -568,15 +613,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) - } - - /* Enable RD PIN Monitoring Reg */ -- val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); -- val |= WR_RD_PIN_MONITORING; -- gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); -+ if (pdata->dev_ready) { -+ val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1); -+ val |= WR_RD_PIN_MONITORING; -+ gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG1, val); -+ } - - val = gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG7); - val &= ~(0xf << 8); - val |= (0xc & 0xf) << 8; - gpmc_cs_write_reg(info->gpmc_cs, GPMC_CS_CONFIG7, val); - -+ /* NAND write protect off */ -+ omap_nand_wp(&info->mtd, NAND_WP_OFF); -+ - if (!request_mem_region(info->phys_base, NAND_IO_SIZE, - pdev->dev.driver->name)) { - err = -EBUSY; -@@ -597,29 +647,39 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) - info->nand.write_buf = omap_write_buf; - info->nand.verify_buf = omap_verify_buf; - -- info->nand.dev_ready = omap_dev_ready; -- info->nand.chip_delay = 0; -- -- /* Options */ -- info->nand.options = NAND_BUSWIDTH_16; -- info->nand.options |= NAND_SKIP_BBTSCAN; -- -- if (hw_ecc) { -- /* init HW ECC */ -- omap_hwecc_init(&info->mtd); -- -- info->nand.ecc.calculate = omap_calculate_ecc; -- info->nand.ecc.hwctl = omap_enable_hwecc; -- info->nand.ecc.correct = omap_correct_data; -- info->nand.ecc.mode = NAND_ECC_HW; -- info->nand.ecc.bytes = 12; -- info->nand.ecc.size = 2048; -- info->nand.ecc.layout = &omap_hw_eccoob; -- -+ /* -+ * If RDY/BSY line is connected to OMAP then use the omap ready funcrtion -+ * and the generic nand_wait function which reads the status register -+ * after monitoring the RDY/BSY line.Otherwise use a standard chip delay -+ * which is slightly more than tR (AC Timing) of the NAND device and read -+ * status register until you get a failure or success -+ */ -+ if (pdata->dev_ready) { -+ info->nand.dev_ready = omap_dev_ready; -+ info->nand.chip_delay = 0; - } else { -- info->nand.ecc.mode = NAND_ECC_SOFT; -+ info->nand.waitfunc = omap_wait; -+ info->nand.chip_delay = 50; - } - -+ info->nand.options |= NAND_SKIP_BBTSCAN; -+ if ((gpmc_cs_read_reg(info->gpmc_cs, GPMC_CS_CONFIG1) & 0x3000) -+ == 0x1000) -+ info->nand.options |= NAND_BUSWIDTH_16; -+ -+#ifdef CONFIG_MTD_NAND_OMAP_HWECC -+ info->nand.ecc.bytes = 3; -+ info->nand.ecc.size = 512; -+ info->nand.ecc.calculate = omap_calculate_ecc; -+ info->nand.ecc.hwctl = omap_enable_hwecc; -+ info->nand.ecc.correct = omap_correct_data; -+ info->nand.ecc.mode = NAND_ECC_HW; -+ -+ /* init HW ECC */ -+ omap_hwecc_init(&info->mtd); -+#else -+ info->nand.ecc.mode = NAND_ECC_SOFT; -+#endif - - /* DIP switches on some boards change between 8 and 16 bit - * bus widths for flash. Try the other width if the first try fails. -@@ -636,14 +696,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) - err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); - if (err > 0) - add_mtd_partitions(&info->mtd, info->parts, err); -- else if (err < 0 && pdata->parts) -+ else if (err <= 0 && pdata->parts) - add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); - else - #endif - add_mtd_device(&info->mtd); - -- omap_nand_wp(&info->mtd, NAND_WP_OFF); -- - platform_set_drvdata(pdev, &info->mtd); - - return 0; -diff --git a/include/asm-arm/arch-omap/board-omap3beagle.h b/include/asm-arm/arch-omap/board-omap3beagle.h -index 46dff31..26ecfb8 100644 ---- a/include/asm-arm/arch-omap/board-omap3beagle.h -+++ b/include/asm-arm/arch-omap/board-omap3beagle.h -@@ -29,5 +29,7 @@ - #ifndef __ASM_ARCH_OMAP3_BEAGLE_H - #define __ASM_ARCH_OMAP3_BEAGLE_H - -+extern void omap3beagle_flash_init(void); -+ - #endif /* __ASM_ARCH_OMAP3_BEAGLE_H */ - diff --git a/packages/linux/linux-omap2-git/omap3evm/no-harry-potter.diff b/packages/linux/linux-omap2-git/omap3evm/no-harry-potter.diff new file mode 100644 index 0000000000..2bb20ab9c0 --- /dev/null +++ b/packages/linux/linux-omap2-git/omap3evm/no-harry-potter.diff @@ -0,0 +1,11 @@ +--- /tmp/Makefile 2008-04-24 14:36:20.509598016 +0200 ++++ git/arch/arm/Makefile 2008-04-24 14:36:31.949546584 +0200 +@@ -47,7 +47,7 @@ + # Note that GCC does not numerically define an architecture version + # macro, but instead defines a whole series of macros which makes + # testing for a specific architecture or later rather impossible. +-arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a) ++arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) + arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + # Only override the compiler option if ARMv6. The ARMv6K extensions are + # always available in ARMv7 diff --git a/packages/linux/linux-omap2_git.bb b/packages/linux/linux-omap2_git.bb index 6a1bfaf341..3ee15985f8 100644 --- a/packages/linux/linux-omap2_git.bb +++ b/packages/linux/linux-omap2_git.bb @@ -13,7 +13,6 @@ SRC_URI = "git://source.mvista.com/git/linux-omap-2.6.git;protocol=git \ SRC_URI_append_beagleboard = " file://no-harry-potter.diff;patch=1 \ file://0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch;patch=1 \ - file://flash.patch;patch=1 \ file://0001-ARM-OMAP-SmartReflex-driver.patch;patch=1 \ file://0002-ARM-OMAP-SmartReflex-driver.patch;patch=1 \ file://0003-ARM-OMAP-SmartReflex-driver.patch;patch=1 \ |